The laptop keyboard doesn't work on many MEDION notebooks, but the
keyboard works well under Windows and Unix.
Through debugging, we found this log in the dmesg:
ACPI: IRQ 1 override to edge, high
pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
And we checked the IRQ definition in the DSDT, it is:
IRQ (Level, ActiveLow, Exclusive, )
{1}
So the BIOS defines the keyboard IRQ to Level_Low, but the Linux
kernel override it to Edge_High. If the Linux kernel is modified
to skip the IRQ override, the keyboard will work normally.
From the existing comment in acpi_dev_get_irqresource(), the override
function only needs to be called when IRQ() or IRQNoFlags() is used
to populate the resource descriptor, and according to Section 6.4.2.1
of ACPI 6.4 [1], if IRQ() is empty or IRQNoFlags() is used, the IRQ
is High true, edge sensitive and non-shareable. ACPICA also assumes
that to be the case (see acpi_rs_set_irq[] in rsirq.c).
In accordance with the above, check 3 additional conditions
(EdgeSensitive, ActiveHigh and Exclusive) when deciding whether or
not to treat an ACPI_RESOURCE_TYPE_IRQ resource as "legacy", in which
case the IRQ override is applicable to it.
Link: https://uefi.org/specs/ACPI/6.4/06_Device_Configuration/Device_Configuration.html#irq-descriptor # [1]
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213031
BugLink: http://bugs.launchpad.net/bugs/1909814
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Manuel Krause <manuelkrause@netscape.net>
Tested-by: Manuel Krause <manuelkrause@netscape.net>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
[ rjw: Subject rewrite, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Update ACPICA code in the kernel to upstream revision 20201113
with changes as follows:
* Add 5 new UUIDs to the known UUID table (Bob Moore).
* Remove extreaneous "the" in comments (Colin Ian King).
* Add function trace macros to improve debugging (Erik Kaneda).
* Fix interpreter memory leak (Erik Kaneda).
* Handle "orphan" _REG for GPIO OpRegions (Hans de Goede).
- Introduce resource_union() and resource_intersection() helpers
and clean up some resource-manipulation code with the help of
them (Andy Shevchenko).
- Revert problematic commit related to the handling of resources
in the ACPI core (Daniel Scally).
- Extend the ACPI device enumeration documentation and the
gpio-line-names _DSD property documentation, clean up the
latter (Flavio Suligoi).
- Clean up _DEP handling during device enumeration, modify the list
of _DEP exceptions and the handling of it and fix up terminology
related to _DEP (Hans de Goede, Rafael Wysocki).
- Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
Andrzej Siewior).
- Clean up the advance_transaction() routine and related code in
the ACPI EC driver (Rafael Wysocki).
- Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper
St. Pierre).
- Make assorted janitorial changes in several ACPI-related pieces
of code (Hanjun Guo, Jason Yan, Punit Agrawal).
-----BEGIN PGP SIGNATURE-----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=5LZe
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20201113, fix and clean up some resources manipulation code, extend
the enumeration and gpio-line-names property documentation, clean up
the handling of _DEP during device enumeration, add a new backlight
DMI quirk, clean up transaction handling in the EC driver and make
some assorted janitorial changes.
Specifics:
- Update ACPICA code in the kernel to upstream revision 20201113 with
changes as follows:
* Add 5 new UUIDs to the known UUID table (Bob Moore)
* Remove extreaneous "the" in comments (Colin Ian King)
* Add function trace macros to improve debugging (Erik Kaneda)
* Fix interpreter memory leak (Erik Kaneda)
* Handle "orphan" _REG for GPIO OpRegions (Hans de Goede)
- Introduce resource_union() and resource_intersection() helpers and
clean up some resource-manipulation code with the help of them
(Andy Shevchenko)
- Revert problematic commit related to the handling of resources in
the ACPI core (Daniel Scally)
- Extend the ACPI device enumeration documentation and the
gpio-line-names _DSD property documentation, clean up the latter
(Flavio Suligoi)
- Clean up _DEP handling during device enumeration, modify the list
of _DEP exceptions and the handling of it and fix up terminology
related to _DEP (Hans de Goede, Rafael Wysocki)
- Eliminate in_interrupt() usage from the ACPI EC driver (Sebastian
Andrzej Siewior)
- Clean up the advance_transaction() routine and related code in the
ACPI EC driver (Rafael Wysocki)
- Add new backlight quirk for GIGABYTE GB-BXBT-2807 (Jasper St
Pierre)
- Make assorted janitorial changes in several ACPI-related pieces of
code (Hanjun Guo, Jason Yan, Punit Agrawal)"
* tag 'acpi-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (40 commits)
ACPI: scan: Fix up _DEP-related terminology with supplier/consumer
ACPI: scan: Drop INT3396 from acpi_ignore_dep_ids[]
ACPI: video: Add DMI quirk for GIGABYTE GB-BXBT-2807
Revert "ACPI / resources: Use AE_CTRL_TERMINATE to terminate resources walks"
ACPI: scan: Add PNP0D80 to the _DEP exceptions list
ACPI: scan: Call acpi_get_object_info() from acpi_add_single_object()
ACPI: scan: Add acpi_info_matches_hids() helper
ACPICA: Update version to 20201113
ACPICA: Interpreter: fix memory leak by using existing buffer
ACPICA: Add function trace macros to improve debugging
ACPICA: Also handle "orphan" _REG methods for GPIO OpRegions
ACPICA: Remove extreaneous "the" in comments
ACPICA: Add 5 new UUIDs to the known UUID table
resource: provide meaningful MODULE_LICENSE() in test suite
ASoC: Intel: catpt: Replace open coded variant of resource_intersection()
ACPI: processor: Drop duplicate setting of shared_cpu_map
ACPI: EC: Clean up status flags checks in advance_transaction()
ACPI: EC: Untangle error handling in advance_transaction()
ACPI: EC: Simplify error handling in advance_transaction()
ACPI: EC: Rename acpi_ec_is_gpe_raised()
...
The functionality of acpi_dev_irqresource_disabled() is same as in common
irqresource_disabled(), so drop acpi_dev_irqresource_disabled() in favour
of that function.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1606905417-183214-4-git-send-email-john.garry@huawei.com
This reverts commit 8a66790b78.
Switching this function to AE_CTRL_TERMINATE broke the documented
behaviour of acpi_dev_get_resources() - AE_CTRL_TERMINATE does not, in
fact, terminate the resource walk because acpi_walk_resource_buffer()
ignores it (specifically converting it to AE_OK), referring to that
value as "an OK termination by the user function". This means that
acpi_dev_get_resources() does not abort processing when the preproc
function returns a negative value.
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As said in commit f2c2cbcc35 ("powerpc: Use pr_warn instead of
pr_warning"), removing pr_warning so all logging messages use a
consistent <prefix>_warn style. Let's do it.
Link: http://lkml.kernel.org/r/20191018031850.48498-8-wangkefeng.wang@huawei.com
To: linux-kernel@vger.kernel.org
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek@suse.com: two more indentation fixes]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some devices have limited addressing capabilities and cannot
reference the whole memory address space while carrying out DMA
operations (eg some devices with bus address bits range smaller than
system bus - which prevents them from using bus addresses that are
otherwise valid for the system).
The ACPI _DMA object allows bus devices to define the DMA window that is
actually addressable by devices that sit upstream the bus, therefore
providing a means to parse and initialize the devices DMA masks and
addressable DMA range size.
By relying on the generic ACPI kernel layer to retrieve and parse
resources, introduce ACPI core code to parse the _DMA object.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function acpi_dev_get_resources() is completely generic and
can be used to parse resource objects that are not necessarily
coming from the _CRS method but also from other objects eg _DMA
that have the same _CRS resource format.
Create an acpi_dev_get_resources() helper, internal to the ACPI
resources parsing compilation unit, __acpi_dev_get_resources(),
that takes a const char* parameter to detect which ACPI method should be
called to retrieve the resources list and make acpi_dev_get_resources()
call it with a method name _CRS leaving the API behaviour unchanged.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix typos and add the following to the scripts/spelling.txt:
overrided||overridden
Link: http://lkml.kernel.org/r/1481573103-11329-22-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ACPI extended IRQ resources may contain a Resource Source field to specify
an alternate interrupt controller, attempting to map them as GSIs is
incorrect, so just disable the platform resource.
Since this field is currently ignored, we make this change conditional
on CONFIG_ACPI_GENERIC_GSI to keep the current behavior on x86 platforms,
in case some existing ACPI tables are using this incorrectly.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Add acpi_resource_consumer(). This takes a struct resource and searches
the ACPI namespace for a device whose current resource settings (_CRS)
includes the resource. It returns the device if it exists, or NULL if no
device uses the resource.
If more than one device uses the resource (this may happen in the case of
bridges), acpi_resource_consumer() returns the first one found by
acpi_get_devices() in its modified depth-first walk of the namespace.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The [0 - 64k] ACPI PCI IO port resource boundary check in:
acpi_dev_ioresource_flags()
is currently applied blindly in the ACPI resource parsing to all
architectures, but only x86 suffers from that IO space limitation.
On arches (ie IA64 and ARM64) where IO space is memory mapped,
the PCI root bridges IO resource windows are firstly initialized from
the _CRS (in acpi_decode_space()) and contain the CPU physical address
at which a root bridge decodes IO space in the CPU physical address
space with the offset value representing the offset required to translate
the PCI bus address into the CPU physical address.
The IO resource windows are then parsed and updated in arch code
before creating and enumerating PCI buses (eg IA64 add_io_space())
to map in an arch specific way the obtained CPU physical address range
to a slice of virtual address space reserved to map PCI IO space,
ending up with PCI bridges resource windows containing IO
resources like the following on a working IA64 configuration:
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x1000000-0x100ffff window] (bus
address [0x0000-0xffff])
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window]
pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window]
pci_bus 0000:00: root bus resource [bus 00]
This implies that the [0 - 64K] check in acpi_dev_ioresource_flags()
leaves platforms with memory mapped IO space (ie IA64) broken (ie kernel
can't claim IO resources since the host bridge IO resource is disabled
and discarded by ACPI core code, see log on IA64 with missing root bridge
IO resource, silently filtered by current [0 - 64k] check in
acpi_dev_ioresource_flags()):
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000fffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0x8fffffff window]
pci_bus 0000:00: root bus resource [mem 0x80004000000-0x800ffffffff window]
pci_bus 0000:00: root bus resource [bus 00]
[...]
pci 0000:00:03.0: [1002:515e] type 00 class 0x030000
pci 0000:00:03.0: reg 0x10: [mem 0x80000000-0x87ffffff pref]
pci 0000:00:03.0: reg 0x14: [io 0x1000-0x10ff]
pci 0000:00:03.0: reg 0x18: [mem 0x88020000-0x8802ffff]
pci 0000:00:03.0: reg 0x30: [mem 0x88000000-0x8801ffff pref]
pci 0000:00:03.0: supports D1 D2
pci 0000:00:03.0: can't claim BAR 1 [io 0x1000-0x10ff]: no compatible
bridge window
For this reason, the IO port resources boundaries check in generic ACPI
parsing code should be guarded with a CONFIG_X86 guard so that more arches
(ie ARM64) can benefit from the generic ACPI resources parsing interface
without incurring in unexpected resource filtering, fixing at the same
time current breakage on IA64.
This patch factors out IO ports boundary [0 - 64k] check in generic ACPI
code and makes the IO space check X86 specific to make sure that IO
space resources are usable on other arches too.
Fixes: 3772aea7d6 (ia64/PCI/ACPI: Use common ACPI resource parsing interface for host bridge)
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_gsi_get_irq_type could be use out of GSI purpose.
Rename and make it available as a resource function.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enhance ACPI resource parsing interfaces to support sparse IO space,
which will be used to share common code between x86 and IA64 later.
Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* pm-cpuidle:
suspend-to-idle: Prevent RCU from complaining about tick_freeze()
* pm-cpufreq:
cpufreq: Allow freq_table to be obtained for offline CPUs
cpufreq: Initialize the governor again while restoring policy
* acpi-resources:
ACPI / PCI: Fix regressions caused by resource_size_t overflow with 32-bit kernel
Zoltan Boszormenyi reported this regression:
"There's a Realtek RTL8111/8168/8411 (PCI ID 10ec:8168, Subsystem ID
1565:230e) network chip on the mainboard. After the r8169 driver loaded
the IRQs in the machine went berserk. Keyboard keypressed arrived with
considerable latency and duplicated, so no real work was possible.
The machine responded to the power button but didn't actually power
down. It just stuck at the powering down message. I had to press the
power button for 4 seconds to power it down.
The computer is a POS machine with a big battery inside. Because of this,
either ACPI or the Realtek chip kept the bad state and after rebooting,
the network chip didn't even show up in lspci. Not even the PXE ROM
announced itself during boot. I had to disconnect the battery to beat
some sense back to the computer.
The regression happens with 4.0.5, 4.1.0-rc8 and 4.1.0-final. 3.18.16 was
good."
The regression is caused by commit 593669c2ac (x86/PCI/ACPI: Use common
ACPI resource interfaces to simplify implementation). Since commit
593669c2ac, x86 PCI ACPI host bridge driver validates ACPI resources by
first converting an ACPI resource to a 'struct resource' structure and
then applying checks against the converted resource structure. The 'start'
and 'end' fields in 'struct resource' are defined to be type of
resource_size_t, which may be 32 bits or 64 bits depending on
CONFIG_PHYS_ADDR_T_64BIT.
This may cause incorrect resource validation results with 32-bit kernels
because 64-bit ACPI resource descriptors may get truncated when converting
to 32-bit 'start' and 'end' fields in 'struct resource'. It eventually
affects PCI resource allocation subsystem and makes some PCI devices and
the system behave abnormally due to incorrect resource assignment.
So enhance the ACPI resource parsing interfaces to ignore ACPI resource
descriptors with address/offset above 4G when running in 32-bit mode.
With the fix applied, the behavior of the machine was restored to how
3.18.16 worked, i.e. the memory range that is over 4GB is ignored again,
and lspci -vvxxx shows that everything is at the same memory window as
they were with 3.18.16.
Reported-and-tested-by: Boszormenyi Zoltan <zboszor@pr.hu>
Fixes: 593669c2ac (x86/PCI/ACPI: Use common ACPI resource interfaces to simplify implementation)
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: 4.0+ <stable@vger.kernel.org> # 4.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no need to carry potentially outdated Free Software Foundation
mailing address in file headers since the COPYING file includes it.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This effectively reverts the following three commits:
7bc10388cc ACPI / resources: free memory on error in add_region_before()
0f1b414d19 ACPI / PNP: Avoid conflicting resource reservations
b9a5e5e18f ACPI / init: Fix the ordering of acpi_reserve_resources()
(commit b9a5e5e18f introduced regressions some of which, but not
all, were addressed by commit 0f1b414d19 and commit 7bc10388cc
was a fixup on top of the latter) and causes ACPI fixed hardware
resources to be reserved at the fs_initcall_sync stage of system
initialization.
The story is as follows. First, a boot regression was reported due
to an apparent resource reservation ordering change after a commit
that shouldn't lead to such changes. Investigation led to the
conclusion that the problem happened because acpi_reserve_resources()
was executed at the device_initcall() stage of system initialization
which wasn't strictly ordered with respect to driver initialization
(and with respect to the initialization of the pcieport driver in
particular), so a random change causing the device initcalls to be
run in a different order might break things.
The response to that was to attempt to run acpi_reserve_resources()
as soon as we knew that ACPI would be in use (commit b9a5e5e18f).
However, that turned out to be too early, because it caused resource
reservations made by the PNP system driver to fail on at least one
system and that failure was addressed by commit 0f1b414d19.
That fix still turned out to be insufficient, though, because
calling acpi_reserve_resources() before the fs_initcall stage of
system initialization caused a boot regression to happen on the
eCAFE EC-800-H20G/S netbook. That meant that we only could call
acpi_reserve_resources() at the fs_initcall initialization stage
or later, but then we might just as well call it after the PNP
initalization in which case commit 0f1b414d19 wouldn't be
necessary any more.
For this reason, the changes made by commit 0f1b414d19 are reverted
(along with a memory leak fixup on top of that commit), the changes
made by commit b9a5e5e18f that went too far are reverted too and
acpi_reserve_resources() is changed into fs_initcall_sync, which
will cause it to be executed after the PNP subsystem initialization
(which is an fs_initcall) and before device initcalls (including
the pcieport driver initialization) which should avoid the initial
issue.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=100581
Link: http://marc.info/?t=143092384600002&r=1&w=2
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831
Link: http://marc.info/?t=143389402600001&r=1&w=2
Fixes: b9a5e5e18f "ACPI / init: Fix the ordering of acpi_reserve_resources()"
Reported-by: Roland Dreier <roland@purestorage.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is a small memory leak on error.
Fixes: 0f1b414d19 (ACPI / PNP: Avoid conflicting resource reservations)
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit b9a5e5e18f "ACPI / init: Fix the ordering of
acpi_reserve_resources()" overlooked the fact that the memory
and/or I/O regions reserved by acpi_reserve_resources() may
conflict with those reserved by the PNP "system" driver.
If that conflict actually takes place, it causes the reservations
made by the "system" driver to fail while before commit b9a5e5e18f
all reservations made by it and by acpi_reserve_resources() would be
successful. In turn, that allows the resources that haven't been
reserved by the "system" driver to be used by others (e.g. PCI) which
sometimes leads to functional problems (up to and including boot
failures).
To fix that issue, introduce a common resource reservation routine,
acpi_reserve_region(), to be used by both acpi_reserve_resources()
and the "system" driver, that will track all resources reserved by
it and avoid making conflicting requests.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99831
Link: http://marc.info/?t=143389402600001&r=1&w=2
Fixes: b9a5e5e18f "ACPI / init: Fix the ordering of acpi_reserve_resources()"
Reported-by: Roland Dreier <roland@purestorage.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
An IO port or MMIO resource assigned to a PCI host bridge may be
consumed by the host bridge itself or available to its child
bus/devices. The ACPI specification defines a bit (Producer/Consumer)
to tell whether the resource is consumed by the host bridge itself,
but firmware hasn't used that bit consistently, so we can't rely on it.
Before commit 593669c2ac ("x86/PCI/ACPI: Use common ACPI resource
interfaces to simplify implementation"), arch/x86/pci/acpi.c ignored
all IO port resources defined by acpi_resource_io and
acpi_resource_fixed_io to filter out IO ports consumed by the host
bridge itself.
Commit 593669c2ac ("x86/PCI/ACPI: Use common ACPI resource interfaces
to simplify implementation") started accepting all IO port and MMIO
resources, which caused a regression that IO port resources consumed
by the host bridge itself became available to its child devices.
Then commit 63f1789ec7 ("x86/PCI/ACPI: Ignore resources consumed by
host bridge itself") ignored resources consumed by the host bridge
itself by checking the IORESOURCE_WINDOW flag, which accidently removed
MMIO resources defined by acpi_resource_memory24, acpi_resource_memory32
and acpi_resource_fixed_memory32.
On x86 and IA64 platforms, all IO port and MMIO resources are assumed
to be available to child bus/devices except one special case:
IO port [0xCF8-0xCFF] is consumed by the host bridge itself
to access PCI configuration space.
So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF]. This solution
will also ease the way to consolidate ACPI PCI host bridge common code
from x86, ia64 and ARM64.
Related ACPI table are archived at:
https://bugzilla.kernel.org/show_bug.cgi?id=94221
Related discussions at:
http://patchwork.ozlabs.org/patch/461633/https://lkml.org/lkml/2015/3/29/304
Fixes: 63f1789ec7 (Ignore resources consumed by host bridge itself)
Reported-by: Bernhard Thaler <bernhard.thaler@wvnet.at>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: 4.0+ <stable@vger.kernel.org> # 4.0+
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some BIOSes report incorrect length for ACPI address space descriptors,
so relax the checks to avoid regressions. This issue has appeared several
times as:
3162b6f0c5 ("PNPACPI: truncate _CRS windows with _LEN > _MAX - _MIN + 1")
d558b483d5 ("x86/PCI: truncate _CRS windows with _LEN > _MAX - _MIN + 1")
f238b414a7 ("PNPACPI: compute Address Space length rather than using _LEN")
48728e0774 ("x86/PCI: compute Address Space length rather than using _LEN")
Please refer to https://bugzilla.kernel.org/show_bug.cgi?id=94221
for more details and example malformed ACPI resource descriptors.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=94221
Fixes: 593669c2ac (x86/PCI/ACPI: Use common ACPI resource interfaces ...)
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Tested-by: Dave Airlie <airlied@redhat.com>
Tested-by: Prakash Punnoor <prakash@punnoor.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Annoying and noisy ACPI debug messages are printed with pr_info()
after the recent ACPI resources handling rework. Replace the
pr_info() with pr_debug() to reduce to noise level.
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently ACPI, PCI and pnp all implement the same resource list
management with different data structure. We need to transfer from
one data structure into another when passing resources from one
subsystem into another subsystem. So move struct resource_list_entry
from ACPI into resource core and rename it as resource_entry,
then it could be reused by different subystems and avoid the data
structure conversion.
Introduce dedicated header file resource_ext.h instead of embedding
it into ioport.h to avoid header file inclusion order issues.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce helper function acpi_dev_filter_resource_type(), which may
be used by acpi_dev_get_resources() to filer out resource based on
resource type.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add field offset to struct resource_list_entry to host address space
translation offset so it could be used to represent bridge resources.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add translation_offset into the result address for bridge window
resources to form the master side address.
Currently acpi_dev_resource_{ext_}address_space() are only used for
devices instead of bridges, so it won't break current users. Later
it will be used to support PCI host bridge drivers.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change function acpi_dev_resource_address_space() and
acpi_dev_resource_ext_address_space() to return address space
translation offset.
It's based on a patch from Yinghai Lu <yinghai@kernel.org>.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enforce stricter checks for address space descriptors according to
ACPI spec.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Also set flag IORESOURCE_UNSET for unassigned resource in addition to
IORESOURCE_DISABLED to mark resource as unassigned.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Normalize return value of resource parse functions as:
1) return "true" if resource is assigned.
2) return "false" and IORESOURCE_DISABLED setting in res->flags if
resource is unassigned.
3) return "false" and zeroing res->flags if it's not an valid or
expected resource.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to ACPI spec 5, section 6.4.3.1 "24-Bit Memory Range Descriptor",
minimum, maximum and address_length field in struct acpi_resource_memory24
is in granularity of 256-bytes. So shift 8-bit left to get correct address.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add support of PREFETCH attributre to ACPI address space and extended
address space parser.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Normal memory and io resources have window always set to false. Move
the flag logic to the unified address space parser.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With the unions in place which let us identify the substructs we can
use a single parser for address_space and ext_address_space.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If the parser disables a resource during parsing, let it return false,
so the calling code does not need to implement further checks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Also apply length check to IO resources.
[Jiang] Remove enforcement that resource starting address must be
non-zero.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Check whether the resulting length is the same as the given
length. Check for start <= end as well.
We need to hand in the resource for this, so we can apply the flags
directly.
[Jiang] Remove enforcement that resource starting address must be
non-zero.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI type is checked in acpi_resource_to_address64() anyway.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
struct acpi_resource_address and struct acpi_resource_extended_address64 share substracts
just at different offsets. To unify the parsing functions, OSPMs like Linux
need a new ACPI_ADDRESS64_ATTRIBUTE as their substructs, so they can
extract the shared data.
This patch also synchronizes the structure changes to the Linux kernel.
The usages are searched by matching the following keywords:
1. acpi_resource_address
2. acpi_resource_extended_address
3. ACPI_RESOURCE_TYPE_ADDRESS
4. ACPI_RESOURCE_TYPE_EXTENDED_ADDRESS
And we found and fixed the usages in the following files:
arch/ia64/kernel/acpi-ext.c
arch/ia64/pci/pci.c
arch/x86/pci/acpi.c
arch/x86/pci/mmconfig-shared.c
drivers/xen/xen-acpi-memhotplug.c
drivers/acpi/acpi_memhotplug.c
drivers/acpi/pci_root.c
drivers/acpi/resource.c
drivers/char/hpet.c
drivers/pnp/pnpacpi/rsparser.c
drivers/hv/vmbus_drv.c
Build tests are passed with defconfig/allnoconfig/allyesconfig and
defconfig+CONFIG_ACPI=n.
Original-by: Thomas Gleixner <tglx@linutronix.de>
Original-by: Jiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Change acpi_dev_resource_address_space() to return failure if the
acpi_resource structure can't be converted to an ACPI address64
structure, so caller could correctly detect failure.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Len Brown <lenb@kernel.org>
Link: http://lkml.kernel.org/r/1414387308-27148-6-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The recently merged change (in v3.14-rc6) to ACPI resource detection
(below) causes all zero length ACPI resources to be elided from the
table:
commit b355cee88e
Author: Zhang Rui <rui.zhang@intel.com>
Date: Thu Feb 27 11:37:15 2014 +0800
ACPI / resources: ignore invalid ACPI device resources
This change has caused a regression in (at least) serial port detection
for a number of machines (see LP#1313981 [1]). These seem to represent
their IO regions (presumably incorrectly) as a zero length region.
Reverting the above commit restores these serial devices.
Only elide zero length resources which lie at address 0.
Fixes: b355cee88e (ACPI / resources: ignore invalid ACPI device resources)
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPI table may export resource entry with 0 length.
But the current code interprets this kind of resource in a wrong way.
It will create a resource structure with
res->end = acpi_resource->start + acpi_resource->len - 1;
This patch fixes a problem on my machine that a platform device fails
to be created because one of its ACPI IO resource entry (start = 0,
end = 0, length = 0) is translated into a generic resource with
start = 0, end = 0xffffffff.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce helper function acpi_has_method() and use it in a number
of places to simplify code.
[rjw: Changelog]
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_get_override_irq() was added because there was a problem with
buggy BIOSes passing wrong IRQ() resource for the RTC IRQ. The
commit that added the workaround was 61fd47e0c8 (ACPI: fix two
IRQ8 issues in IOAPIC mode).
With ACPI 5 enumerated devices there are typically one or more
extended IRQ resources per device (and these IRQs can be shared).
However, the acpi_get_override_irq() workaround forces all IRQs in
range 0 - 15 (the legacy ISA IRQs) to be edge triggered, active high
as can be seen from the dmesg below:
ACPI: IRQ 6 override to edge, high
ACPI: IRQ 7 override to edge, high
ACPI: IRQ 7 override to edge, high
ACPI: IRQ 13 override to edge, high
Also /proc/interrupts for the I2C controllers (INT33C2 and INT33C3) shows
the same thing:
7: 4 0 0 0 IO-APIC-edge INT33C2:00, INT33C3:00
The _CSR method for INT33C2 (and INT33C3) device returns following
resource:
Interrupt (ResourceConsumer, Level, ActiveLow, Shared,,, )
{
0x00000007,
}
which states that this is supposed to be level triggered, active low,
shared IRQ instead.
Fix this by making sure that acpi_get_override_irq() gets only called
when we are dealing with legacy IRQ() or IRQNoFlags() descriptors.
While we are there, correct pr_warning() to print the right triggering
value.
This change turns out to be necessary to make DMA work correctly on
systems based on the Intel Lynxpoint PCH (Platform Controller Hub).
[rjw: Changelog]
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hui Wang
Tom Saeger
Linus Torvalds
John Garry
Daniel Scally
Gustavo A. R. Silva
Kefeng Wang
Thomas Gleixner
Erik Schmauss
Gustavo A. R. Silva
Lorenzo Pieralisi
Masahiro Yamada
Agustin Vega-Frias
Bjorn Helgaas
Christophe RICARD
Jiang Liu
Rafael J. Wysocki
Jarkko Nikula
Dan Carpenter
Lv Zheng
Andy Whitcroft
Zhang Rui
Jiang Liu
Mika Westerberg