Граф коммитов

16 Коммитов

Автор SHA1 Сообщение Дата
Randy Dunlap 9523b33cc3 NIOS2: setup.c: drop unused variable 'dram_start'
This is a nuisance when CONFIG_WERROR is set, so drop the variable
declaration since the code that used it was removed.

../arch/nios2/kernel/setup.c: In function 'setup_arch':
../arch/nios2/kernel/setup.c:152:13: warning: unused variable 'dram_start' [-Wunused-variable]
  152 |         int dram_start;

Fixes: 7f7bc20bc4 ("nios2: Don't use _end for calculating min_low_pfn")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andreas Oetken <andreas.oetken@siemens.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2021-09-27 08:34:54 -05:00
Kefeng Wang 4154267a14 nios2: convert to setup_initial_init_mm()
Use setup_initial_init_mm() helper to simplify code.

Link: https://lkml.kernel.org/r/20210608083418.137226-10-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-08 11:48:21 -07:00
Andreas Oetken 7f7bc20bc4 nios2: Don't use _end for calculating min_low_pfn
If there is a initramfs linked into the kernel which will be
freed later on there is free memory somewhere between _etext
and _end, thus using _end for min_low_pfn is not correct.
This may lead to issues in dma_capable when checking
'min(addr, end) < phys_to_dma(dev, PFN_PHYS(min_low_pfn)))'
as the address addr might be below min_low_pfn. Picked
find_limits from architecture arm for applying min_low_pfn and
max_low_pfn. Maybe using _etext for min_low_pfn would be
fine too.

Signed-off-by: Andreas Oetken <andreas.oetken@siemens.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2021-02-19 15:02:09 +08:00
Arvind Sankar 701250223c arch/nios2/setup: Drop dummy_con initialization
con_init in tty/vt.c will now set conswitchp to dummy_con if it's unset.
Drop it from arch setup code.

Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://lore.kernel.org/r/20191218214506.49252-15-nivedita@alum.mit.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14 15:29:17 +01:00
Wang Xiayang 91d99a724e nios2: force the string buffer NULL-terminated
strncpy() does not ensure NULL-termination when the input string
size equals to the destination buffer size COMMAND_LINE_SIZE.
Besides, grep under arch/ with 'boot_command_line' shows
no other arch-specific code uses strncpy() when copying
boot_command_line.

Use strlcpy() instead.

This issue is identified by a Coccinelle script.

Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-09-20 14:55:57 +08:00
Mike Rapoport 57c8a661d9 mm: remove include/linux/bootmem.h
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.

The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>

@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>

[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
  Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
  Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 08:54:16 -07:00
Mike Rapoport 0042379279 nios2: switch to NO_BOOTMEM
Remove bootmem bitmap initialization and replace reserve_bootmem() with
memblock_reserve().

Link: http://lkml.kernel.org/r/1533326330-31677-5-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Herring <robh@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:25:20 -07:00
Mike Rapoport a811c05c16 nios2: use generic early_init_dt_add_memory_arch
All we have to do is to enable memblock, the generic FDT code will take
care of the rest.

Link: http://lkml.kernel.org/r/1533326330-31677-4-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rob Herring <robh@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26 16:25:20 -07:00
Tobias Klauser e118c3fec9 nios2: remove custom early console implementation
As of commits d8f347ba35cf ("nios2: enable earlycon support"),
0dcc0542a0 ("serial: altera_jtaguart: add earlycon support") and
4d9d7d896d ("serial: altera_uart: add earlycon support"), the nios2
architecture and the altera_uart/altera_jtaguart drivers support
earlycon. Thus, the custom early console implementation for nios2 is no
longer necessary to get early boot messages. Remove it and rely fully on
earlycon support.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
2017-05-11 17:44:21 +08:00
Tobias Klauser 44a4ed4257 nios2: enable earlycon support
Enable generic earlycon support for nios2. This e.g. allows to use a
8250/16650 UART as earlycon.

In order to get the earlycon, we just need to call parse_early_param()
in early_init_devtree() as soon as the device tree is initially scanned.
By adding an stdout-path property to the dts (done in this patch for
10m50_devboard), the earlycon can be used.

In order to provide early printk support, we need to provide a dummy
implementation of early_console_write(), so that
arch/nios2/kernel/early_printk.c can still be compiled if neither
SERIAL_ALTERA_JTAGUART_CONSOLE nor SERIAL_ALTERA_UART_CONSOLE is
selected. As soon as the altera_uart and altera_jtaguart support
earlycon, the entire file can be removed.

Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-05-08 16:59:19 +08:00
Tobias Klauser 921d701e6f nios2: reserve boot memory for device tree
Make sure to reserve the boot memory for the flattened device tree.
Otherwise it might get overwritten, e.g. when initial_boot_params is
copied, leading to a corrupted FDT and a boot hang/crash:

  bootconsole [early0] enabled
  Early console on uart16650 initialized at 0xf8001600
  OF: fdt: Error -11 processing FDT
  Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!

  ---[ end Kernel panic - not syncing: setup_cpuinfo: No CPU found in devicetree!

Guenter Roeck says:

> I think I found the problem. In unflatten_and_copy_device_tree(), with added
> debug information:
>
> OF: fdt: initial_boot_params=c861e400, dt=c861f000 size=28874 (0x70ca)
>
> ... and then initial_boot_params is copied to dt, which results in corrupted
> fdt since the memory overlaps. Looks like the initial_boot_params memory
> is not reserved and (re-)allocated by early_init_dt_alloc_memory_arch().

Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reference: http://lkml.kernel.org/r/20170226210338.GA19476@roeck-us.net
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
2017-04-02 20:13:57 -07:00
Ingo Molnar 9164bb4a18 sched/headers: Prepare to move 'init_task' and 'init_thread_union' from <linux/sched.h> to <linux/sched/task.h>
Update all usage sites first.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:38 +01:00
Ley Foon Tan 744606c76c nios2: add screen_info
Fix build error when enable VGA console.

drivers/video/console/vgacon.c:586: undefined reference to `screen_info'

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
2016-12-13 17:13:17 +08:00
Marek Vasut 4db2196d0c nios2: Fix unused variable warning
Fix the following compiler splat by adding __maybe_unused annotation to
the variable. Using this particular annotation has the least ugly impact
on the code compared to using ifdeffery.

arch/nios2/kernel/setup.c: In function 'nios2_boot_init':
arch/nios2/kernel/setup.c:107:7: warning: unused variable 'cmdline_passed' [-Wunused-variable]
  char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
       ^

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Ley Foon Tan <lftan@altera.com>
2015-11-09 10:33:29 +08:00
Ley Foon Tan e8bf5bc776 nios2: add early printk support
Signed-off-by: Ley Foon Tan <lftan@altera.com>
2015-02-10 23:21:08 +08:00
Ley Foon Tan 27d22413e6 nios2: Kernel booting and initialization
This patch adds the kernel booting and the initial setup code.

Signed-off-by: Ley Foon Tan <lftan@altera.com>
2014-12-08 12:55:49 +08:00