The only slightly tricky merge conflict was the netdevsim because the
mutex locking fix overlapped a lot of driver reload reorganization.
The rest were (relatively) trivial in nature.
Signed-off-by: David S. Miller <davem@davemloft.net>
When rxrpc_recvmsg_data() sets the return value to 1 because it's drained
all the data for the last packet, it checks the last-packet flag on the
whole packet - but this is wrong, since the last-packet flag is only set on
the final subpacket of the last jumbo packet. This means that a call that
receives its last packet in a jumbo packet won't complete properly.
Fix this by having rxrpc_locate_data() determine the last-packet state of
the subpacket it's looking at and passing that back to the caller rather
than having the caller look in the packet header. The caller then needs to
cache this in the rxrpc_call struct as rxrpc_locate_data() isn't then
called again for this packet.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Fixes: e2de6c4048 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to extend the rcu_read_lock() section in rxrpc_error_report()
and use rcu_dereference_sk_user_data() instead of plain access
to sk->sk_user_data to make sure all rules are respected.
The compiler wont reload sk->sk_user_data at will, and RCU rules
prevent memory beeing freed too soon.
Fixes: f0308fb070 ("rxrpc: Fix possible NULL pointer access in ICMP handling")
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an ICMP packet comes in on the UDP socket backing an AF_RXRPC socket as
the UDP socket is being shut down, rxrpc_error_report() may get called to
deal with it after sk_user_data on the UDP socket has been cleared, leading
to a NULL pointer access when this local endpoint record gets accessed.
Fix this by just returning immediately if sk_user_data was NULL.
The oops looks like the following:
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
RIP: 0010:rxrpc_error_report+0x1bd/0x6a9
...
Call Trace:
? sock_queue_err_skb+0xbd/0xde
? __udp4_lib_err+0x313/0x34d
__udp4_lib_err+0x313/0x34d
icmp_unreach+0x1ee/0x207
icmp_rcv+0x25b/0x28f
ip_protocol_deliver_rcu+0x95/0x10e
ip_local_deliver+0xe9/0x148
__netif_receive_skb_one_core+0x52/0x6e
process_backlog+0xdc/0x177
net_rx_action+0xf9/0x270
__do_softirq+0x1b6/0x39a
? smpboot_register_percpu_thread+0xce/0xce
run_ksoftirqd+0x1d/0x42
smpboot_thread_fn+0x19e/0x1b3
kthread+0xf1/0xf6
? kthread_delayed_work_timer_fn+0x83/0x83
ret_from_fork+0x24/0x30
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: syzbot+611164843bd48cc2190c@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the cleanup of the crypto state on a call after the call has been
disconnected. As the call has been disconnected, its connection ref has
been discarded and so we can't go through that to get to the security ops
table.
Fix this by caching the security ops pointer in the rxrpc_call struct and
using that when freeing the call security state. Also use this in other
places we're dealing with call-specific security.
The symptoms look like:
BUG: KASAN: use-after-free in rxrpc_release_call+0xb2d/0xb60
net/rxrpc/call_object.c:481
Read of size 8 at addr ffff888062ffeb50 by task syz-executor.5/4764
Fixes: 1db88c5343 ("rxrpc: Fix -Wframe-larger-than= warnings from on-stack crypto")
Reported-by: syzbot+eed305768ece6682bb7f@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
The rxrpc_peer record needs to hold a reference on the rxrpc_local record
it points as the peer is used as a base to access information in the
rxrpc_local record.
This can cause problems in __rxrpc_put_peer(), where we need the network
namespace pointer, and in rxrpc_send_keepalive(), where we need to access
the UDP socket, leading to symptoms like:
BUG: KASAN: use-after-free in __rxrpc_put_peer net/rxrpc/peer_object.c:411
[inline]
BUG: KASAN: use-after-free in rxrpc_put_peer+0x685/0x6a0
net/rxrpc/peer_object.c:435
Read of size 8 at addr ffff888097ec0058 by task syz-executor823/24216
Fix this by taking a ref on the local record for the peer record.
Fixes: ace45bec6d ("rxrpc: Fix firewall route keepalive")
Fixes: 2baec2c3f8 ("rxrpc: Support network namespacing")
Reported-by: syzbot+b9be979c55f2bea8ed30@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
rxrpc_put_call() calls trace_rxrpc_call() after it has done the decrement
of the refcount - which looks at the debug_id in the call record. But
unless the refcount was reduced to zero, we no longer have the right to
look in the record and, indeed, it may be deleted by some other thread.
Fix this by getting the debug_id out before decrementing the refcount and
then passing that into the tracepoint.
Fixes: e34d4234b0 ("rxrpc: Trace rxrpc_call usage")
Signed-off-by: David Howells <dhowells@redhat.com>
rxrpc_put_*conn() calls trace_rxrpc_conn() after they have done the
decrement of the refcount - which looks at the debug_id in the connection
record. But unless the refcount was reduced to zero, we no longer have the
right to look in the record and, indeed, it may be deleted by some other
thread.
Fix this by getting the debug_id out before decrementing the refcount and
then passing that into the tracepoint.
Fixes: 363deeab6d ("rxrpc: Add connection tracepoint and client conn state tracepoint")
Signed-off-by: David Howells <dhowells@redhat.com>
rxrpc_put_peer() calls trace_rxrpc_peer() after it has done the decrement
of the refcount - which looks at the debug_id in the peer record. But
unless the refcount was reduced to zero, we no longer have the right to
look in the record and, indeed, it may be deleted by some other thread.
Fix this by getting the debug_id out before decrementing the refcount and
then passing that into the tracepoint.
This can cause the following symptoms:
BUG: KASAN: use-after-free in __rxrpc_put_peer net/rxrpc/peer_object.c:411
[inline]
BUG: KASAN: use-after-free in rxrpc_put_peer+0x685/0x6a0
net/rxrpc/peer_object.c:435
Read of size 8 at addr ffff888097ec0058 by task syz-executor823/24216
Fixes: 1159d4b496 ("rxrpc: Add a tracepoint to track rxrpc_peer refcounting")
Reported-by: syzbot+b9be979c55f2bea8ed30@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
When sendmsg() finds a call to continue on with, if the call is in an
inappropriate state, it doesn't release the ref it just got on that call
before returning an error.
This causes the following symptom to show up with kasan:
BUG: KASAN: use-after-free in rxrpc_send_keepalive+0x8a2/0x940
net/rxrpc/output.c:635
Read of size 8 at addr ffff888064219698 by task kworker/0:3/11077
where line 635 is:
whdr.epoch = htonl(peer->local->rxnet->epoch);
The local endpoint (which cannot be pinned by the call) has been released,
but not the peer (which is pinned by the call).
Fix this by releasing the call in the error path.
Fixes: 37411cad63 ("rxrpc: Fix potential NULL-pointer exception")
Reported-by: syzbot+d850c266e3df14da1d31@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
There was supposed to be a trace indicating that a new peer had been
created. Add it.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There's a misplaced traceline in rxrpc_input_packet() which is looking at a
packet that just got released rather than the replacement packet.
Fix this by moving the traceline after the assignment that moves the new
packet pointer to the actual packet pointer.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Reported-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a local endpoint is ceases to be in use, such as when the kafs module
is unloaded, the kernel will emit an assertion failure if there are any
outstanding client connections:
rxrpc: Assertion failed
------------[ cut here ]------------
kernel BUG at net/rxrpc/local_object.c:433!
and even beyond that, will evince other oopses if there are service
connections still present.
Fix this by:
(1) Removing the triggering of connection reaping when an rxrpc socket is
released. These don't actually clean up the connections anyway - and
further, the local endpoint may still be in use through another
socket.
(2) Mark the local endpoint as dead when we start the process of tearing
it down.
(3) When destroying a local endpoint, strip all of its client connections
from the idle list and discard the ref on each that the list was
holding.
(4) When destroying a local endpoint, call the service connection reaper
directly (rather than through a workqueue) to immediately kill off all
outstanding service connections.
(5) Make the service connection reaper reap connections for which the
local endpoint is marked dead.
Only after destroying the connections can we close the socket lest we get
an oops in a workqueue that's looking at a connection or a peer.
Fixes: 3d18cbb7fd ("rxrpc: Fix conn expiry timers")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The in-place decryption routines in AF_RXRPC's rxkad security module
currently call skb_cow_data() to make sure the data isn't shared and that
the skb can be written over. This has a problem, however, as the softirq
handler may be still holding a ref or the Rx ring may be holding multiple
refs when skb_cow_data() is called in rxkad_verify_packet() - and so
skb_shared() returns true and __pskb_pull_tail() dislikes that. If this
occurs, something like the following report will be generated.
kernel BUG at net/core/skbuff.c:1463!
...
RIP: 0010:pskb_expand_head+0x253/0x2b0
...
Call Trace:
__pskb_pull_tail+0x49/0x460
skb_cow_data+0x6f/0x300
rxkad_verify_packet+0x18b/0xb10 [rxrpc]
rxrpc_recvmsg_data.isra.11+0x4a8/0xa10 [rxrpc]
rxrpc_kernel_recv_data+0x126/0x240 [rxrpc]
afs_extract_data+0x51/0x2d0 [kafs]
afs_deliver_fs_fetch_data+0x188/0x400 [kafs]
afs_deliver_to_call+0xac/0x430 [kafs]
afs_wait_for_call_to_complete+0x22f/0x3d0 [kafs]
afs_make_call+0x282/0x3f0 [kafs]
afs_fs_fetch_data+0x164/0x300 [kafs]
afs_fetch_data+0x54/0x130 [kafs]
afs_readpages+0x20d/0x340 [kafs]
read_pages+0x66/0x180
__do_page_cache_readahead+0x188/0x1a0
ondemand_readahead+0x17d/0x2e0
generic_file_read_iter+0x740/0xc10
__vfs_read+0x145/0x1a0
vfs_read+0x8c/0x140
ksys_read+0x4a/0xb0
do_syscall_64+0x43/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by using skb_unshare() instead in the input path for DATA packets
that have a security index != 0. Non-DATA packets don't need in-place
encryption and neither do unencrypted DATA packets.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Reported-by: Julian Wollrath <jwollrath@web.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Use the previously-added transmit-phase skbuff private flag to simplify the
socket buffer tracing a bit. Which phase the skbuff comes from can now be
divined from the skb rather than having to be guessed from the call state.
We can also reduce the number of rxrpc_skb_trace values by eliminating the
difference between Tx and Rx in the symbols.
Signed-off-by: David Howells <dhowells@redhat.com>
Add a flag in the private data on an skbuff to indicate that this is a
transmission-phase buffer rather than a receive-phase buffer.
Signed-off-by: David Howells <dhowells@redhat.com>
Abstract out rxtx ring cleanup into its own function from its two callers.
This makes it easier to apply the same changes to both.
Signed-off-by: David Howells <dhowells@redhat.com>
Pass the reference held on a DATA skb in the rxrpc input handler into the
Rx ring rather than getting an additional ref for this and then dropping
the original ref at the end.
Signed-off-by: David Howells <dhowells@redhat.com>
Use the information now cached in the skbuff private data to avoid the need
to reparse a jumbo packet. We can find all the subpackets by dead
reckoning, so it's only necessary to note how many there are, whether the
last one is flagged as LAST_PACKET and whether any have the REQUEST_ACK
flag set.
This is necessary as once recvmsg() can see the packet, it can start
modifying it, such as doing in-place decryption.
Fixes: 248f219cb8 ("rxrpc: Rewrite the data and ack handling code")
Signed-off-by: David Howells <dhowells@redhat.com>
Improve the information stored about jumbo packets so that we don't need to
reparse them so much later.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
rxrpc_queue_local() attempts to queue the local endpoint it is given and
then, if successful, prints a trace line. The trace line includes the
current usage count - but we're not allowed to look at the local endpoint
at this point as we passed our ref on it to the workqueue.
Fix this by reading the usage count before queuing the work item.
Also fix the reading of local->debug_id for trace lines, which must be done
with the same consideration as reading the usage count.
Fixes: 09d2bf595d ("rxrpc: Add a tracepoint to track rxrpc_local refcounting")
Reported-by: syzbot+78e71c5bab4f76a6a719@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
When a local endpoint (struct rxrpc_local) ceases to be in use by any
AF_RXRPC sockets, it starts the process of being destroyed, but this
doesn't cause it to be removed from the namespace endpoint list immediately
as tearing it down isn't trivial and can't be done in softirq context, so
it gets deferred.
If a new socket comes along that wants to bind to the same endpoint, a new
rxrpc_local object will be allocated and rxrpc_lookup_local() will use
list_replace() to substitute the new one for the old.
Then, when the dying object gets to rxrpc_local_destroyer(), it is removed
unconditionally from whatever list it is on by calling list_del_init().
However, list_replace() doesn't reset the pointers in the replaced
list_head and so the list_del_init() will likely corrupt the local
endpoints list.
Fix this by using list_replace_init() instead.
Fixes: 730c5fd42c ("rxrpc: Fix local endpoint refcounting")
Reported-by: syzbot+193e29e9387ea5837f1d@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Fix rxrpc_unuse_local() to handle a NULL local pointer as it can be called
on an unbound socket on which rx->local is not yet set.
The following reproduced (includes omitted):
int main(void)
{
socket(AF_RXRPC, SOCK_DGRAM, AF_INET);
return 0;
}
causes the following oops to occur:
BUG: kernel NULL pointer dereference, address: 0000000000000010
...
RIP: 0010:rxrpc_unuse_local+0x8/0x1b
...
Call Trace:
rxrpc_release+0x2b5/0x338
__sock_release+0x37/0xa1
sock_close+0x14/0x17
__fput+0x115/0x1e9
task_work_run+0x72/0x98
do_exit+0x51b/0xa7a
? __context_tracking_exit+0x4e/0x10e
do_group_exit+0xab/0xab
__x64_sys_exit_group+0x14/0x17
do_syscall_64+0x89/0x1d4
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Reported-by: syzbot+20dee719a2e090427b5f@syzkaller.appspotmail.com
Fixes: 730c5fd42c ("rxrpc: Fix local endpoint refcounting")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Don't bother generating maxSkew in the ACK packet as it has been obsolete
since AFS 3.1.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
The object lifetime management on the rxrpc_local struct is broken in that
the rxrpc_local_processor() function is expected to clean up and remove an
object - but it may get requeued by packets coming in on the backing UDP
socket once it starts running.
This may result in the assertion in rxrpc_local_rcu() firing because the
memory has been scheduled for RCU destruction whilst still queued:
rxrpc: Assertion failed
------------[ cut here ]------------
kernel BUG at net/rxrpc/local_object.c:468!
Note that if the processor comes around before the RCU free function, it
will just do nothing because ->dead is true.
Fix this by adding a separate refcount to count active users of the
endpoint that causes the endpoint to be destroyed when it reaches 0.
The original refcount can then be used to refcount objects through the work
processor and cause the memory to be rcu freed when that reaches 0.
Fixes: 4f95dd78a7 ("rxrpc: Rework local endpoint management")
Reported-by: syzbot+1e0edc4b8b7494c28450@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
rxkad sometimes triggers a warning about oversized stack frames when
building with clang for a 32-bit architecture:
net/rxrpc/rxkad.c:243:12: error: stack frame size of 1088 bytes in function 'rxkad_secure_packet' [-Werror,-Wframe-larger-than=]
net/rxrpc/rxkad.c:501:12: error: stack frame size of 1088 bytes in function 'rxkad_verify_packet' [-Werror,-Wframe-larger-than=]
The problem is the combination of SYNC_SKCIPHER_REQUEST_ON_STACK() in
rxkad_verify_packet()/rxkad_secure_packet() with the relatively large
scatterlist in rxkad_verify_packet_1()/rxkad_secure_packet_encrypt().
The warning does not show up when using gcc, which does not inline the
functions as aggressively, but the problem is still the same.
Allocate the cipher buffers from the slab instead, caching the allocated
packet crypto request memory used for DATA packet crypto in the rxrpc_call
struct.
Fixes: 17926a7932 ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the fact that a notification isn't sent to the recvmsg side to indicate
a call failed when sendmsg() fails to transmit a DATA packet with the error
ENETUNREACH, EHOSTUNREACH or ECONNREFUSED.
Without this notification, the afs client just sits there waiting for the
call to complete in some manner (which it's not now going to do), which
also pins the rxrpc call in place.
This can be seen if the client has a scope-level IPv6 address, but not a
global-level IPv6 address, and we try and transmit an operation to a
server's IPv6 address.
Looking in /proc/net/rxrpc/calls shows completed calls just sat there with
an abort code of RX_USER_ABORT and an error code of -ENETUNREACH.
Fixes: c54e43d752 ("rxrpc: Fix missing start of call timeout")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby
rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces
the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which
the tries to take the already held lock.
Fix this by providing a version of rxrpc_put_peer() that can be called in
situations where the lock is already held.
The bug may produce the following lockdep report:
============================================
WARNING: possible recursive locking detected
5.2.0-next-20190718 #41 Not tainted
--------------------------------------------
kworker/0:3/21678 is trying to acquire lock:
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh
/./include/linux/spinlock.h:343 [inline]
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
__rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline]
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435
but task is already holding lock:
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh
/./include/linux/spinlock.h:343 [inline]
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
rxrpc_peer_keepalive_dispatch /net/rxrpc/peer_event.c:378 [inline]
00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at:
rxrpc_peer_keepalive_worker+0x6b3/0xd02 /net/rxrpc/peer_event.c:430
Fixes: 330bdcfadc ("rxrpc: Fix the keepalive generator [ver #2]")
Reported-by: syzbot+72af434e4b3417318f84@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
In the sysctl code the proc_dointvec_minmax() function is often used to
validate the user supplied value between an allowed range. This
function uses the extra1 and extra2 members from struct ctl_table as
minimum and maximum allowed value.
On sysctl handler declaration, in every source file there are some
readonly variables containing just an integer which address is assigned
to the extra1 and extra2 members, so the sysctl range is enforced.
The special values 0, 1 and INT_MAX are very often used as range
boundary, leading duplication of variables like zero=0, one=1,
int_max=INT_MAX in different source files:
$ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l
248
Add a const int array containing the most commonly used values, some
macros to refer more easily to the correct array member, and use them
instead of creating a local one for every object file.
This is the bloat-o-meter output comparing the old and new binary
compiled with the default Fedora config:
# scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o
add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164)
Data old new delta
sysctl_vals - 12 +12
__kstrtab_sysctl_vals - 12 +12
max 14 10 -4
int_max 16 - -16
one 68 - -68
zero 128 28 -100
Total: Before=20583249, After=20583085, chg -0.00%
[mcroce@redhat.com: tipc: remove two unused variables]
Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com
[akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c]
[arnd@arndb.de: proc/sysctl: make firmware loader table conditional]
Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de
[akpm@linux-foundation.org: fix fs/eventpoll.c]
Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
-----BEGIN PGP SIGNATURE-----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=E3bF
-----END PGP SIGNATURE-----
Merge tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring ACL support from David Howells:
"This changes the permissions model used by keys and keyrings to be
based on an internal ACL by the following means:
- Replace the permissions mask internally with an ACL that contains a
list of ACEs, each with a specific subject with a permissions mask.
Potted default ACLs are available for new keys and keyrings.
ACE subjects can be macroised to indicate the UID and GID specified
on the key (which remain). Future commits will be able to add
additional subject types, such as specific UIDs or domain
tags/namespaces.
Also split a number of permissions to give finer control. Examples
include splitting the revocation permit from the change-attributes
permit, thereby allowing someone to be granted permission to revoke
a key without allowing them to change the owner; also the ability
to join a keyring is split from the ability to link to it, thereby
stopping a process accessing a keyring by joining it and thus
acquiring use of possessor permits.
- Provide a keyctl to allow the granting or denial of one or more
permits to a specific subject. Direct access to the ACL is not
granted, and the ACL cannot be viewed"
* tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Provide KEYCTL_GRANT_PERMISSION
keys: Replace uid/gid/perm permissions checking with an ACL
-----BEGIN PGP SIGNATURE-----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=Push
-----END PGP SIGNATURE-----
Merge tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring namespacing from David Howells:
"These patches help make keys and keyrings more namespace aware.
Firstly some miscellaneous patches to make the process easier:
- Simplify key index_key handling so that the word-sized chunks
assoc_array requires don't have to be shifted about, making it
easier to add more bits into the key.
- Cache the hash value in the key so that we don't have to calculate
on every key we examine during a search (it involves a bunch of
multiplications).
- Allow keying_search() to search non-recursively.
Then the main patches:
- Make it so that keyring names are per-user_namespace from the point
of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not
accessible cross-user_namespace.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this.
- Move the user and user-session keyrings to the user_namespace
rather than the user_struct. This prevents them propagating
directly across user_namespaces boundaries (ie. the KEY_SPEC_*
flags will only pick from the current user_namespace).
- Make it possible to include the target namespace in which the key
shall operate in the index_key. This will allow the possibility of
multiple keys with the same description, but different target
domains to be held in the same keyring.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this.
- Make it so that keys are implicitly invalidated by removal of a
domain tag, causing them to be garbage collected.
- Institute a network namespace domain tag that allows keys to be
differentiated by the network namespace in which they operate. New
keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned
the network domain in force when they are created.
- Make it so that the desired network namespace can be handed down
into the request_key() mechanism. This allows AFS, NFS, etc. to
request keys specific to the network namespace of the superblock.
This also means that the keys in the DNS record cache are
thenceforth namespaced, provided network filesystems pass the
appropriate network namespace down into dns_query().
For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other
cache keyrings, such as idmapper keyrings, also need to set the
domain tag - for which they need access to the network namespace of
the superblock"
* tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Pass the network namespace into request_key mechanism
keys: Network namespace domain tag
keys: Garbage collect keys for which the domain has been removed
keys: Include target namespace in match criteria
keys: Move the user and user-session keyrings to the user_namespace
keys: Namespace keyring names
keys: Add a 'recurse' flag for keyring searches
keys: Cache the hash value to avoid lots of recalculation
keys: Simplify key description management
If sendmsg() or sendmmsg() is called on a connected socket that hasn't had
bind() called on it, then an oops will occur when the kernel tries to
connect the call because no local endpoint has been allocated.
Fix this by implicitly binding the socket if it is in the
RXRPC_CLIENT_UNBOUND state, just like it does for the RXRPC_UNBOUND state.
Further, the state should be transitioned to RXRPC_CLIENT_BOUND after this
to prevent further attempts to bind it.
This can be tested with:
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <linux/rxrpc.h>
static const unsigned char inet6_addr[16] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, -1, 0xac, 0x14, 0x14, 0xaa
};
int main(void)
{
struct sockaddr_rxrpc srx;
struct cmsghdr *cm;
struct msghdr msg;
unsigned char control[16];
int fd;
memset(&srx, 0, sizeof(srx));
srx.srx_family = 0x21;
srx.srx_service = 0;
srx.transport_type = AF_INET;
srx.transport_len = 0x1c;
srx.transport.sin6.sin6_family = AF_INET6;
srx.transport.sin6.sin6_port = htons(0x4e22);
srx.transport.sin6.sin6_flowinfo = htons(0x4e22);
srx.transport.sin6.sin6_scope_id = htons(0xaa3b);
memcpy(&srx.transport.sin6.sin6_addr, inet6_addr, 16);
cm = (struct cmsghdr *)control;
cm->cmsg_len = CMSG_LEN(sizeof(unsigned long));
cm->cmsg_level = SOL_RXRPC;
cm->cmsg_type = RXRPC_USER_CALL_ID;
*(unsigned long *)CMSG_DATA(cm) = 0;
msg.msg_name = NULL;
msg.msg_namelen = 0;
msg.msg_iov = NULL;
msg.msg_iovlen = 0;
msg.msg_control = control;
msg.msg_controllen = cm->cmsg_len;
msg.msg_flags = 0;
fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET);
connect(fd, (struct sockaddr *)&srx, sizeof(srx));
sendmsg(fd, &msg, 0);
return 0;
}
Leading to the following oops:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
RIP: 0010:rxrpc_connect_call+0x42/0xa01
...
Call Trace:
? mark_held_locks+0x47/0x59
? __local_bh_enable_ip+0xb6/0xba
rxrpc_new_client_call+0x3b1/0x762
? rxrpc_do_sendmsg+0x3c0/0x92e
rxrpc_do_sendmsg+0x3c0/0x92e
rxrpc_sendmsg+0x16b/0x1b5
sock_sendmsg+0x2d/0x39
___sys_sendmsg+0x1a4/0x22a
? release_sock+0x19/0x9e
? reacquire_held_locks+0x136/0x160
? release_sock+0x19/0x9e
? find_held_lock+0x2b/0x6e
? __lock_acquire+0x268/0xf73
? rxrpc_connect+0xdd/0xe4
? __local_bh_enable_ip+0xb6/0xba
__sys_sendmsg+0x5e/0x94
do_syscall_64+0x7d/0x1bf
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 2341e07757 ("rxrpc: Simplify connect() implementation and simplify sendmsg() op")
Reported-by: syzbot+7966f2a0b2c7da8939b4@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With gcc 4.1:
net/rxrpc/output.c: In function ‘rxrpc_send_data_packet’:
net/rxrpc/output.c:338: warning: ‘ret’ may be used uninitialized in this function
Indeed, if the first jump to the send_fragmentable label is made, and
the address family is not handled in the switch() statement, ret will be
used uninitialized.
Fix this by BUG()'ing as is done in other places in rxrpc where internal
support for future address families will need adding. It should not be
possible to reach this normally as the address families are checked
up-front.
Fixes: 5a924b8951 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace the uid/gid/perm permissions checking on a key with an ACL to allow
the SETATTR and SEARCH permissions to be split. This will also allow a
greater range of subjects to represented.
============
WHY DO THIS?
============
The problem is that SETATTR and SEARCH cover a slew of actions, not all of
which should be grouped together.
For SETATTR, this includes actions that are about controlling access to a
key:
(1) Changing a key's ownership.
(2) Changing a key's security information.
(3) Setting a keyring's restriction.
And actions that are about managing a key's lifetime:
(4) Setting an expiry time.
(5) Revoking a key.
and (proposed) managing a key as part of a cache:
(6) Invalidating a key.
Managing a key's lifetime doesn't really have anything to do with
controlling access to that key.
Expiry time is awkward since it's more about the lifetime of the content
and so, in some ways goes better with WRITE permission. It can, however,
be set unconditionally by a process with an appropriate authorisation token
for instantiating a key, and can also be set by the key type driver when a
key is instantiated, so lumping it with the access-controlling actions is
probably okay.
As for SEARCH permission, that currently covers:
(1) Finding keys in a keyring tree during a search.
(2) Permitting keyrings to be joined.
(3) Invalidation.
But these don't really belong together either, since these actions really
need to be controlled separately.
Finally, there are number of special cases to do with granting the
administrator special rights to invalidate or clear keys that I would like
to handle with the ACL rather than key flags and special checks.
===============
WHAT IS CHANGED
===============
The SETATTR permission is split to create two new permissions:
(1) SET_SECURITY - which allows the key's owner, group and ACL to be
changed and a restriction to be placed on a keyring.
(2) REVOKE - which allows a key to be revoked.
The SEARCH permission is split to create:
(1) SEARCH - which allows a keyring to be search and a key to be found.
(2) JOIN - which allows a keyring to be joined as a session keyring.
(3) INVAL - which allows a key to be invalidated.
The WRITE permission is also split to create:
(1) WRITE - which allows a key's content to be altered and links to be
added, removed and replaced in a keyring.
(2) CLEAR - which allows a keyring to be cleared completely. This is
split out to make it possible to give just this to an administrator.
(3) REVOKE - see above.
Keys acquire ACLs which consist of a series of ACEs, and all that apply are
unioned together. An ACE specifies a subject, such as:
(*) Possessor - permitted to anyone who 'possesses' a key
(*) Owner - permitted to the key owner
(*) Group - permitted to the key group
(*) Everyone - permitted to everyone
Note that 'Other' has been replaced with 'Everyone' on the assumption that
you wouldn't grant a permit to 'Other' that you wouldn't also grant to
everyone else.
Further subjects may be made available by later patches.
The ACE also specifies a permissions mask. The set of permissions is now:
VIEW Can view the key metadata
READ Can read the key content
WRITE Can update/modify the key content
SEARCH Can find the key by searching/requesting
LINK Can make a link to the key
SET_SECURITY Can change owner, ACL, expiry
INVAL Can invalidate
REVOKE Can revoke
JOIN Can join this keyring
CLEAR Can clear this keyring
The KEYCTL_SETPERM function is then deprecated.
The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set,
or if the caller has a valid instantiation auth token.
The KEYCTL_INVALIDATE function then requires INVAL.
The KEYCTL_REVOKE function then requires REVOKE.
The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an
existing keyring.
The JOIN permission is enabled by default for session keyrings and manually
created keyrings only.
======================
BACKWARD COMPATIBILITY
======================
To maintain backward compatibility, KEYCTL_SETPERM will translate the
permissions mask it is given into a new ACL for a key - unless
KEYCTL_SET_ACL has been called on that key, in which case an error will be
returned.
It will convert possessor, owner, group and other permissions into separate
ACEs, if each portion of the mask is non-zero.
SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE
permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned
on if a keyring is being altered.
The KEYCTL_DESCRIBE function translates the ACL back into a permissions
mask to return depending on possessor, owner, group and everyone ACEs.
It will make the following mappings:
(1) INVAL, JOIN -> SEARCH
(2) SET_SECURITY -> SETATTR
(3) REVOKE -> WRITE if SETATTR isn't already set
(4) CLEAR -> WRITE
Note that the value subsequently returned by KEYCTL_DESCRIBE may not match
the value set with KEYCTL_SETATTR.
=======
TESTING
=======
This passes the keyutils testsuite for all but a couple of tests:
(1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now
returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed
if the type doesn't have ->read(). You still can't actually read the
key.
(2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't
work as Other has been replaced with Everyone in the ACL.
Signed-off-by: David Howells <dhowells@redhat.com>
Create key domain tags for network namespaces and make it possible to
automatically tag keys that are used by networked services (e.g. AF_RXRPC,
AFS, DNS) with the default network namespace if not set by the caller.
This allows keys with the same description but in different namespaces to
coexist within a keyring.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: netdev@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-afs@lists.infradead.org
Add a 'recurse' flag for keyring searches so that the flag can be omitted
and recursion disabled, thereby allowing just the nominated keyring to be
searched and none of the children.
Signed-off-by: David Howells <dhowells@redhat.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public licence as published by
the free software foundation either version 2 of the licence or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 114 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow kernel services using AF_RXRPC to indicate that a call should be
non-interruptible. This allows kafs to make things like lock-extension and
writeback data storage calls non-interruptible.
If this is set, signals will be ignored for operations on that call where
possible - such as waiting to get a call channel on an rxrpc connection.
It doesn't prevent UDP sendmsg from being interrupted, but that will be
handled by packet retransmission.
rxrpc_kernel_recv_data() isn't affected by this since that never waits,
preferring instead to return -EAGAIN and leave the waiting to the caller.
Userspace initiated calls can't be set to be uninterruptible at this time.
Signed-off-by: David Howells <dhowells@redhat.com>
Provide an interface to set max lifespan on a call from inside of the
kernel without having to call kernel_sendmsg().
Signed-off-by: David Howells <dhowells@redhat.com>
David S. Miller
David Howells
Eric Dumazet
Matteo Croce
Linus Torvalds
Thomas Gleixner