We are going to support low/max limit, each cgroup will have 2 limits
after that. This patch prepares for the multiple limits change.
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
SRCU uses a delayed work item. Skip cleaning it up, and
the result is use-after-free in the work item callbacks.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Fixes: 0eb05bf290
Reviewed-by: Xiao Guangrong <xiaoguangrong.eric@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The nested_ept_enabled flag introduced in commit 7ca29de213 was not
computed correctly. We are interested only in L1's EPT state, not the
the combined L0+L1 value.
In particular, if L0 uses EPT but L1 does not, nested_ept_enabled must
be false to make sure that PDPSTRs are loaded based on CR3 as usual,
because the special case described in 26.3.2.4 Loading Page-Directory-
Pointer-Table Entries does not apply.
Fixes: 7ca29de213 ("KVM: nVMX: fix CR3 load if L2 uses PAE paging and EPT")
Cc: qemu-stable@nongnu.org
Reported-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
or VM memory are not put thus leaked in kvm_iommu_unmap_memslots() when
destroy VM.
This is consistent with current vfio implementation.
Signed-off-by: herongguang <herongguang.he@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel Apollo Lake platform and the Denverton microserver.
+ small fixlets.
-----BEGIN PGP SIGNATURE-----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=aftN
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.11_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"A new EDAC driver for the Pondicherry2 memory controller IP found in
the Intel Apollo Lake platform and the Denverton microserver.
Plus small fixlets.
Normally I had this queued for 4.12 but Tony requested for the
pnd2_edac driver to possibly land in 4.11 therefore I'm sending it to
you now.
It is a driver for new hardware which people don't have yet so it
shouldn't cause any regressions.
The couple of patches ontop of it show that Qiuxu actually did test it
on the hardware he has access to :)"
* tag 'edac_for_4.11_2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, pnd2_edac: Fix reported DIMM number
EDAC, pnd2_edac: Fix !EDAC_DEBUG build
EDAC: Select DEBUG_FS
EDAC, pnd2_edac: Add new EDAC driver for Intel SoC platforms
EDAC, i5000, i5400: Fix use of MTR_DRAM_WIDTH macro
EDAC, xgene: Fix wrongly spelled "procesing"
- Kconfig fixup for the TI IOdelay pinctrl-single add-on.
- Fix up a typo in the meson i2c ao groups.
- Switch a remapping back to use devm_ioremap() as
devm_ioremap_resource() does not allow for sharing memory
regions.
- Do not clear the Qualcomm irq status bit in irq_unmask(),
as this can lead to missing interrupts while the irq handler
is executing.
- Add irq_request/release_resources() on the ST driver.
- Add a bunch of mysteriously missing pingroups for high
numbered pins in the Qualcomm ipq4019 driver.
-----BEGIN PGP SIGNATURE-----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=0sa2
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull more pin control fixes from Linus Walleij:
"Here is a bunch of pin control fixes again
A bit more than I'd like for this subsystem at this point, but what
can I do. They are all driver fixes for hardware issues, as like "we
forgot", "we didn't think of the fact that this could happen", "oops
that one goes there" etc
- Kconfig fixup for the TI IOdelay pinctrl-single add-on
- fix up a typo in the meson i2c ao groups
- switch a remapping back to use devm_ioremap() as
devm_ioremap_resource() does not allow for sharing memory regions
- do not clear the Qualcomm irq status bit in irq_unmask(), as this
can lead to missing interrupts while the irq handler is executing
- add irq_request/release_resources() on the ST driver
- add a bunch of mysteriously missing pingroups for high numbered
pins in the Qualcomm ipq4019 driver"
* tag 'pinctrl-v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: ipq4019: add missing pingroups for pins > 70
pinctrl: st: add irq_request/release_resources callbacks
pinctrl: qcom: Don't clear status bit on irq_unmask
pinctrl: samsung: Fix memory mapping code
pinctrl: meson-gxbb: Fix typo in i2c ao groups
pinctrl: ti: The IODelay driver is a DRA7xxx feature so depend on that SoC
A smattering of different small fixes for some random driver subsystems.
Nothing all that major, just resolutions for reported issues and bugs.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWNedPQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykY+wCeL0dFw/ney0sJ6s7HsmXu3uxFGyoAoIIXL7AP
48YAht+BOOmBzagXIKbw
=EFxm
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"A smattering of different small fixes for some random driver
subsystems. Nothing all that major, just resolutions for reported
issues and bugs.
All have been in linux-next with no reported issues"
* tag 'char-misc-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
extcon: int3496: Set the id pin to direction-input if necessary
extcon: int3496: Use gpiod_get instead of gpiod_get_index
extcon: int3496: Add dependency on X86 as it's Intel specific
extcon: int3496: Add GPIO ACPI mapping table
extcon: int3496: Rename GPIO pins in accordance with binding
vmw_vmci: handle the return value from pci_alloc_irq_vectors correctly
ppdev: fix registering same device name
parport: fix attempt to write duplicate procfiles
auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matches
Drivers: hv: vmbus: Don't leak memory when a channel is rescinded
Drivers: hv: vmbus: Don't leak channel ids
Drivers: hv: util: don't forget to init host_ts.lock
Drivers: hv: util: move waiting for release to hv_utils_transport itself
vmbus: remove hv_event_tasklet_disable/enable
vmbus: use rcu for per-cpu channel list
mei: don't wait for os version message reply
mei: fix deadlock on mei reset
intel_th: pci: Add Gemini Lake support
intel_th: pci: Add Denverton SOC support
intel_th: Don't leak module refcount on failure to activate
...
Here is a single kernfs fix for 4.11-rc4 that resolves a reported issue.
It has been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWNedpw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykLkgCdEVdmtWb9Fd0igfh7bSWBHdD9W20An3vKOror
nTP7sT8FwSWGKdOpIaik
=0Eht
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single kernfs fix for 4.11-rc4 that resolves a reported
issue.
It has been in linux-next with no reported issues"
* tag 'driver-core-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kernfs: Check KERNFS_HAS_RELEASE before calling kernfs_release_file()
Here are some tty and serial driver fixes for 4.11-rc4. One of these
fix a long-standing issue in the ldisc code that was found by Dmitry
Vyukov with his great fuzzing work. The other fixes resolve other
reported issues, and there is one revert of a patch in 4.11-rc1 that
wasn't correct.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWNeexA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykTSQCg11kA9FkRe28wurC7hljx8tcnBmsAoNE5Arw8
b3NfQ3Sm50gVPXxKQPWZ
=WyEk
-----END PGP SIGNATURE-----
Merge tag 'tty-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some tty and serial driver fixes for 4.11-rc4.
One of these fix a long-standing issue in the ldisc code that was
found by Dmitry Vyukov with his great fuzzing work. The other fixes
resolve other reported issues, and there is one revert of a patch in
4.11-rc1 that wasn't correct.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix data race in tty_ldisc_ref_wait()
tty: don't panic on OOM in tty_set_ldisc()
Revert "tty: serial: pl011: add ttyAMA for matching pl011 console"
tty: acpi/spcr: QDF2400 E44 checks for wrong OEM revision
serial: 8250_dw: Fix breakage when HAVE_CLK=n
serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios
Here are some small IIO driver fixes for 4.11-rc4 that resolve a number
of tiny reported issues. All of these have been in linux-next for a
while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWNeeCg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynXYwCcC+ZqoQ2zyAXI9NRNzADGqLgVLDkAoL5emrPe
10VBu7ocPtuAI12QdcGI
=xfgR
-----END PGP SIGNATURE-----
Merge tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull IIO driver fixes from Greg KH:
"Here are some small IIO driver fixes for 4.11-rc4 that resolve a
number of tiny reported issues. All of these have been in linux-next
for a while with no reported issues"
* tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: imu: st_lsm6dsx: fix FIFO_CTRL2 overwrite during watermark configuration
iio: adc: ti_am335x_adc: fix fifo overrun recovery
iio: sw-device: Fix config group initialization
iio: magnetometer: ak8974: remove incorrect __exit markups
iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
Here are a number of small USB and PHY driver fixes for 4.11-rc4.
Nothing major here, just an bunch of small fixes, and a handfull of good
fixes from Johan for devices with crazy descriptors. There are a few
new device ids in here as well.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWNefwQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykewwCg1P1HEZV2wLJSalsPxduIKIRLcmkAnRcE0H31
2egrp1seSGQumYcGQUJ/
=2fH+
-----END PGP SIGNATURE-----
Merge tag 'usb-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are a number of small USB and PHY driver fixes for 4.11-rc4.
Nothing major here, just an bunch of small fixes, and a handfull of
good fixes from Johan for devices with crazy descriptors. There are a
few new device ids in here as well.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
usb: gadget: f_hid: fix: Don't access hidg->req without spinlock held
usb: gadget: udc: remove pointer dereference after free
usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed
usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval
usb: gadget: acm: fix endianness in notifications
usb: dwc3: gadget: delay unmap of bounced requests
USB: serial: qcserial: add Dell DW5811e
usb: hub: Fix crash after failure to read BOS descriptor
ACM gadget: fix endianness in notifications
USB: usbtmc: fix probe error path
USB: usbtmc: add missing endpoint sanity check
USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems
usb: musb: fix possible spinlock deadlock
usb: musb: dsps: fix iounmap in error and exit paths
usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer
usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk
uwb: i1480-dfu: fix NULL-deref at probe
uwb: hwa-rc: fix NULL-deref at probe
USB: wusbcore: fix NULL-deref at probe
USB: uss720: fix NULL-deref at probe
...
- cxl: Route eeh events to all slices for pci_channel_io_perm_failure state
- powerpc/64s: Fix idle wakeup potential to clobber registers
- Revert "powerpc/64: Disable use of radix under a hypervisor"
- gcc-plugins: update architecture list in documentation
Thanks to:
Andrew Donnellan, Nicholas Piggin, Paul Mackerras, Vaibhav Jain.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJY1ySvAAoJEFHr6jzI4aWAYx8QAJHHLYvBc8Tl2kxXJRQos182
6Dhff1dp8OJNNBSwPalJPPd/4SkJ4UTFP3CSobuhRmj5ZZ3qzQ3ONvZSC+9NtXFj
yw2qGagabmGcInnHupVMTd13rrhveHOgC+7SabsnbjUeAqpoccv675P2MYLq0xYQ
JILOTzbghVlwDhQD3e3/BBkqSSgWibMegGwO8rX8Z+Bw0c7X7tfz4Dpa5d5rnBzc
jUgbzoBE9E9AQ0BJmp5Nqc8UwMvkWgFHwQ4/D5a+GEaE7rJmxG7twbYHJoGhgLkb
ceB2iMfZDdagmCUrw179JmgKcSWBLoN9v/uykDrejdaEQCj+M8HTRFLZXccGd/1h
p7FNr3z7lqLi9GxQnYDFtoOWbR4wK8Wirk45He5b9JSCqWYQxaxJcPqRx/IAG33O
xXoMjdN79rrljerVnE1JZHB8WRXFEs4fEkGiahCnX8hC7VNIcSvMtgss2nsGgyHq
vuMfdFvRhGfqKX6AL4cBukotCEvI1pPvo5LYpF6HiHxLM6+g/dX7ZlWrIOoEup1P
5FhDk/pirRQurVI7Tvmiz3bUCqbloqhZBZ4vec0wz2lfHJ2+5cdoNM0+OGJkHJrN
Jr7NvdlhH35Awz9Cf358oVpWlHNuPuJrmWnZSpWM+3/FTv7UM6WgComuzl9olF40
jdqp+aUODC6gQH6sWlhP
=4CFb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc fixes from Michael Ellerman:
"These are all pretty minor. The fix for idle wakeup would be a bad bug
but has not been observed in practice.
The update to the gcc-plugins docs was Cc'ed to Kees and Jon, Kees
OK'ed it going via powerpc and I didn't hear from Jon.
- cxl: Route eeh events to all slices for pci_channel_io_perm_failure state
- powerpc/64s: Fix idle wakeup potential to clobber registers
- Revert "powerpc/64: Disable use of radix under a hypervisor"
- gcc-plugins: update architecture list in documentation
Thanks to: Andrew Donnellan, Nicholas Piggin, Paul Mackerras, Vaibhav
Jain"
* tag 'powerpc-4.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
gcc-plugins: update architecture list in documentation
Revert "powerpc/64: Disable use of radix under a hypervisor"
powerpc/64s: Fix idle wakeup potential to clobber registers
cxl: Route eeh events to all slices for pci_channel_io_perm_failure state
inodes relating to the inline_data and metadata checksum features.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAljXHNMACgkQ8vlZVpUN
gaPwoggAiodb37DHZ/X6fnRr8314OJT8mRUbUK3aDagCRb0Kp9iFAwwpHIG8Gxw1
akI7Jy8VWLC4EbHb9wzXFEO7wl/IBLq3t70Vid2cBR302gblhIIz6hkHrQ9RIlW3
MH5sFhXiVq4WYPuxQFWS6ohg6/SYTwcgI9rXxEnkLVmOiG2Ov2/v4/wiflau8vgK
fNYyncHSylwJ5QIaT8mUIawetlunEHO0Vz5AZNzkcMhkzUHxmRWvMtGWcvwukstb
7vXZhN5HHB8RZ33qcdtuAaNBHwBmrU/acicIpsvL/jfkFWlJTS0PBRUvwxnPeebo
G0xRDEIwpZoy5h8fxzIxqh+CQqg6QA==
=/ycw
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a memory leak on an error path, and two races when modifying
inodes relating to the inline_data and metadata checksum features"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix two spelling nits
ext4: lock the xattr block before checksuming it
jbd2: don't leak memory if setting up journal fails
ext4: mark inode dirty after converting inline directory
DIMM number passed to edac_mc_handle_error() was accidentally hardcoded
to zero. Pass in the correct daddr->dimm value.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAljW4wYACgkQ8vlZVpUN
gaPYugf9ExFbJhN+iYqUVbGXPvlr5VpEtDeVt7IfO3a37hqCEQ0IEPzksNIfUFul
B8/rYXpz0B5gqCJeo66CGLkb1SVvSoSKCq9/BTQtugohxM7sGxDFTmdB+A+u0QJH
leILfaMFuj0DhVOrdYVpGh7e1XPgSTUWy6/G42OJqf3SV2WxGRJtyBfmghZxEdiY
XYCGqjq47yOIPvzB+ufKe1hnphKMgxlHeuPvByzPCvOs58GlxAYR3Ycuvjc/nz+8
QVlAEPpGhf9ytEXELsxq/ZbsNj9xtXsNAzkAoMK+xZ2JCxIHRcS1ay/iAwxw+d9r
bnlpI+8tQ79GIGCv3cusJSwq7j1iuQ==
=wPlW
-----END PGP SIGNATURE-----
Merge tag 'fscrypt-for-linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt
Pull fscrypto fixes from Ted Ts'o:
"A code cleanup and bugfix for fs/crypto"
* tag 'fscrypt-for-linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: eliminate ->prepare_context() operation
fscrypt: remove broken support for detecting keyring key revocation
Bug fixes in asus_atk0110, it87 and max31790 drivers.
Added missing API definition to hwmon core.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=XQKx
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- bug fixes in asus_atk0110, it87 and max31790 drivers
- added missing API definition to hwmon core
* tag 'hwmon-for-linus-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus_atk0110) fix uninitialized data access
hwmon: Add missing HWMON_T_ALARM
hwmon: (it87) Avoid registering the same chip on both SIO addresses
hwmon: (max31790) Set correct PWM value
- Fix for dma_ops change in this kernel, resolving the s390, powerpc,
and IOMMU operation
- A few other oops fixes
- The rest are all minor fixes
-----BEGIN PGP SIGNATURE-----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=6axB
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"This has been a slow -rc cycle for the RDMA subsystem. We really
haven't had a lot of rc fixes come in. This pull request is the first
of this entire rc cycle and it has all of the suitable fixes so far
and it's still only about 20 patches. The fix for the minor breakage
cause by the dma mapping patchset is in here, as well as a couple
other potential oops fixes, but the rest is more minor.
Summary:
- fix for dma_ops change in this kernel, resolving the s390, powerpc,
and IOMMU operation
- a few other oops fixes
- the rest are all minor fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/qib: fix false-postive maybe-uninitialized warning
RDMA/iser: Fix possible mr leak on device removal event
IB/device: Convert ib-comp-wq to be CPU-bound
IB/cq: Don't process more than the given budget
IB/rxe: increment msn only when completing a request
uapi: fix rdma/mlx5-abi.h userspace compilation errors
IB/core: Restore I/O MMU, s390 and powerpc support
IB/rxe: Update documentation link
RDMA/ocrdma: fix a type issue in ocrdma_put_pd_num()
IB/rxe: double free on error
RDMA/vmw_pvrdma: Activate device on ethernet link up
RDMA/vmw_pvrdma: Dont hardcode QP header page
RDMA/vmw_pvrdma: Cleanup unused variables
infiniband: Fix alignment of mmap cookies to support VIPT caching
IB/core: Protect against self-requeue of a cq work item
i40iw: Receive netdev events post INET_NOTIFIER state
Pull audit fix from Paul Moore:
"We've got an audit fix, and unfortunately it is big.
While I'm not excited that we need to be sending you something this
large during the -rcX phase, it does fix some very real, and very
tangled, problems relating to locking, backlog queues, and the audit
daemon connection.
This code has passed our testsuite without problem and it has held up
to my ad-hoc stress tests (arguably better than the existing code),
please consider pulling this as fix for the next v4.11-rcX tag"
* 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit:
audit: fix auditd/kernel connection state tracking
We must lock the xattr block before calculating or verifying the
checksum in order to avoid spurious checksum failures.
https://bugzilla.kernel.org/show_bug.cgi?id=193661
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
one where we need to copy a string because we can't guarantee it isn't
freed sometime later.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=8q6a
-----END PGP SIGNATURE-----
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of Sunxi and Rockchip clk driver fixes and a core framework
one where we need to copy a string because we can't guarantee it isn't
freed sometime later"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: fix recalc_rate formula of NKMP clocks
clk: sunxi-ng: Fix div/mult settings for osc12M on A64
clk: rockchip: Make uartpll a child of the gpll on rk3036
clk: rockchip: add "," to mux_pll_src_apll_dpll_gpll_usb480m_p on rk3036
clk: core: Copy connection id
dt-bindings: arm: update Armada CP110 system controller binding
clk: sunxi-ng: sun6i: Fix enable bit offset for hdmi-ddc module clock
clk: sunxi: ccu-sun5i needs nkmp
clk: sunxi-ng: mp: Adjust parent rate for pre-dividers
aarch64-linux-gcc-7 complains about code it doesn't fully understand:
drivers/infiniband/hw/qib/qib_iba7322.c: In function 'qib_7322_txchk_change':
include/asm-generic/bitops/non-atomic.h:105:35: error: 'shadow' may be used uninitialized in this function [-Werror=maybe-uninitialized]
The code is right, and despite trying hard, I could not come up with a version
that I liked better than just adding a fake initialization here to shut up the
warning.
Fixes: f931551baf ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
blk_integrity_profile's are never modified, so mark them 'const' so that
they are placed in .rodata and benefit from memory protection.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When the rdma device is removed, we must cleanup all
the rdma resources within the DEVICE_REMOVAL event
handler to let the device teardown gracefully. When
this happens with live I/O, some memory regions are
occupied. Thus, track them too and dereg all the mr's.
We are safe with mr access by iscsi_iser_cleanup_task.
Reported-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This workqueue is used by our storage target mode ULPs
via the new CQ API. Recent observations when working
with very high-end flash storage devices reveal that
UNBOUND workqueue threads can migrate between cpu cores
and even numa nodes (although some numa locality is accounted
for).
While this attribute can be useful in some workloads,
it does not fit in very nicely with the normal
run-to-completion model we usually use in our target-mode
ULPs and the block-mq irq<->cpu affinity facilities.
The whole block-mq concept is that the completion will
land on the same cpu where the submission was performed.
The fact that our submitter thread is migrating cpus
can break this locality.
We assume that as a target mode ULP, we will serve multiple
initiators/clients and we can spread the load enough without
having to use unbound kworkers.
Also, while we're at it, expose this workqueue via sysfs which
is harmless and can be useful for debug.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>--
Signed-off-by: Doug Ledford <dledford@redhat.com>
According to C9-147, MSN should only be incremented when the last packet of
a multi packet request has been received.
"Logically, the requester associates a sequential Send Sequence Number
(SSN) with each WQE posted to the send queue. The SSN bears a one-
to-one relationship to the MSN returned by the responder in each re-
sponse packet. Therefore, when the requester receives a response, it in-
terprets the MSN as representing the SSN of the most recent request
completed by the responder to determine which send WQE(s) can be
completed."
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Consistently use types from linux/types.h to fix the following
rdma/mlx5-abi.h userspace compilation errors:
/usr/include/rdma/mlx5-abi.h:69:25: error: 'u64' undeclared here (not in a function)
MLX5_LIB_CAP_4K_UAR = (u64)1 << 0,
/usr/include/rdma/mlx5-abi.h:69:29: error: expected ',' or '}' before numeric constant
MLX5_LIB_CAP_4K_UAR = (u64)1 << 0,
Include <linux/if_ether.h> to fix the following rdma/mlx5-abi.h
userspace compilation error:
/usr/include/rdma/mlx5-abi.h:286:12: error: 'ETH_ALEN' undeclared here (not in a function)
__u8 dmac[ETH_ALEN];
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Avoid that the following error message is reported on the console
while loading an RDMA driver with I/O MMU support enabled:
DMAR: Allocating domain for mlx5_0 failed
Ensure that DMA mapping operations that use to_pci_dev() to
access to struct pci_dev see the correct PCI device. E.g. the s390
and powerpc DMA mapping operations use to_pci_dev() even with I/O
MMU support disabled.
This patch preserves the following changes of the DMA mapping updates
patch series:
- Introduction of dma_virt_ops.
- Removal of ib_device.dma_ops.
- Removal of struct ib_dma_mapping_ops.
- Removal of an if-statement from each ib_dma_*() operation.
- IB HW drivers no longer set dma_device directly.
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reported-by: Parav Pandit <parav@mellanox.com>
Fixes: commit 99db949403 ("IB/core: Remove ib_device.dma_device")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: parav@mellanox.com
Tested-by: parav@mellanox.com
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All Soft-RoCE (rxe) is handled now in rdma-core user space library,
so the documentation. The patch below updates the documentation
link to that new location.
Reported-by: Josh Beavers <josh.beavers@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We want to return zero on success or negative error codes. The type
should be int and not u8.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
"goto err;" has it's own kfree_skb() call so it's a double free. We
only need to free on the "goto exit;" path.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Removed the unused nreq and redundant index variables.
Moved hardcoded async and cq ring pages number to macro.
Reported-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Tested-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When a filesystem is mounted on a nbd device and on a disconnect, because
of kill_bdev(), and resetting bdev size to zero, buffer_head mappings are
getting destroyed under mounted filesystem.
After a bdev size reset(i.e bdev->bd_inode->i_size = 0) on a disconnect,
followed by a sys_umount(),
generic_shutdown_super()->...
->__sync_blockdev()->...
-blkdev_writepages()->...
->do_invalidatepage()->...
-discard_buffer() is discarding superblock buffer_head assumed
to be in mapped state by ext4_commit_super().
[mlin: ported to 4.11-rc2]
Signed-off-by: Ratna Manoj Bolla <manoj.br@gmail.com
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We can't just set the timeout on the tagset, we have to set it on the
queue as it would have been setup already at this point.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We've been relying on the block layer to assume rq->errors being set
translates into -EIO. I noticed in testing that sometimes this isn't
true, and really there's not much of a reason to have a counter instead
of just using -EIO. So set it properly so we don't leak random numbers
to unsuspecting victims.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We can submit IO in a processes context, which means there can be
pending signals. This isn't a fatal error for NBD, but it does require
some finesse. If the signal happens before we transmit anything then we
are ok, just requeue the request and carry on. However if we've done a
partial transmit we can't allow anything else to be transmitted on this
socket until we transmit the remaining part of the request. Deal with
this by keeping track of how much we've sent for the current request,
and if we get an ERESTARTSYS during any part of our transmission save
the state of that request and requeue the IO. If anybody tries to
submit a request that isn't our pending request then requeue that
request until we are able to service the one that is pending.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently we return true in blk_mq_dispatch_rq_list() if we queued IO
successfully, but we really want to return whether or not the we made
progress. Progress includes if we got an error return. If we don't,
this can lead to a hang in blk_mq_sched_dispatch_requests() when a
driver is draining IO by returning BLK_MQ_QUEUE_ERROR instead of
manually ending the IO in error and return BLK_MQ_QUEUE_OK.
Tested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
blkdev_issue_flush() is now always synchronous, and it no longer has a
flags argument. So remove the part of the comment about the WAIT flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block fixes from Jens Axboe:
"A few fixes for the current series that should go into -rc4. This
contains:
- a fix for a potential corruption of un-started requests from Ming.
- a blk-stat fix from Omar, ensuring we flush the stat batch before
checking nr_samples.
- a set of fixes from Sagi for the nvmeof family"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: don't complete un-started request in timeout handler
nvme-loop: handle cpu unplug when re-establishing the controller
nvme-rdma: handle cpu unplug when re-establishing the controller
nvmet-rdma: Fix a possible uninitialized variable dereference
nvmet: confirm sq percpu has scheduled and switched to atomic
nvme-loop: fix a possible use-after-free when destroying the admin queue
blk-stat: fix blk_stat_sum() if all samples are batched
reclaim path, tagged for stable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJY1QoTAAoJEEp/3jgCEfOLtnoH/0uj3Y2QUVHDo0Je9HkQhzVC
Mp2a/WzN1YO/wdYRdxs6LbVqMIukPJ5kKbKO3WIgpJZR9lxSM9k5Y0YC98YVBHuB
v1uuTPe60fmdJRYnoD4/SfwXiIiAF5/dzPp80SI4xQ9zN24dS1wBREkH2eXUeoKL
FCEoHUv7cJju1dGNbcGpv4MV75b0e+HHAxPuDG4fiUdT79Vp+wP7exx0lMkS9ub8
i5T1GU5gDDBR+SKhpqMIvNgR7s3zdInUs476tk6jz/o049BwybkLIuDhx0+x93/g
1Y1KXHYPCT3yZeL5kdJxM6Dul6wDYOsr2/wIPHzY0ym9RXqCEy/PFowJnL+7eWk=
=cTM6
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.11-rc4' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a writeback deadlock caused by a GFP_KERNEL allocation on
the reclaim path, tagged for stable"
* tag 'ceph-for-4.11-rc4' of git://github.com/ceph/ceph-client:
libceph: force GFP_NOIO for socket allocations
- A couple of OMAP 4.11 regression fixes, including a boot regression for
SmartReflex, hypervisor mode in thumb2 mode, and reference counting of
device nodes
- A fix for cpu_idle on at91
- Minor DT fixes on across several platforms:
sunxi, bcm53xx, at91, nsp, ns2, ux500, omap
- A fix to correct an API change in the reset controllers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIVAwUAWNWBrGCrR//JCVInAQJE/xAArSDx+6i7On53k3QfxkR1mONHrEOlXhlP
VbTeBfkYtYB08Pgq99QVJE5qYK2N5w2664UNbgs+KKYnYJTNl0G6EW1l7oj+21M+
xg3e6ctdfeztYeU34q7D2TxzP/EBRHdbpEuT+JHuQOWFYNfGAj2vSt2cdPUael/Q
D4s4BgeM1dIOzN3z3AvuQpqIhLedVRFAGYAaalKXiwREYUVDgnqhHCPWChVnSQMR
gnNDYcb5ZxCaELH9gkdVqyfdlScw9juKMg5v7e7KizhBUqOGBT0bguLC9Kfh3mDO
tIJGwkuqWvc5tAKuAcGklIVOzP8Wtcq0ObrFzLczy6Waf+6aaQl5J8Uw85UR/zg4
44AHzk++apXTCDlrRzQZIkvaN9TmOBr65qrW1rnqVN72FRS3arDuMV1rEFRdZy2x
riXmJmENWo+sakst4fTS0QY+/GlPDB8Md4X++Vkl3DgWFgiiBTcPbJCEazsFVip+
QQzWfXTSB98bCVUuYr5eZgMlPYHrd1ZQIbgzlzIkdUuZ4XCe4MGw88km6TqviBwf
dduNKnFctkrLAgM3V8rXZBQsZqJHRDmpOfSZ+9XtGYggy83g5FLbkp9h6Ws66SbI
KCgLzV0THCs/gKLMeDqFerO1xQzxN84pd+YKetnD1RU+5bo98DMUkqgFn+cZyCFA
dlImlZcN7Pc=
=zKIg
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
- a couple of OMAP 4.11 regression fixes, including a boot regression
for SmartReflex, hypervisor mode in thumb2 mode, and reference
counting of device nodes
- a fix for cpu_idle on at91
- minor DT fixes on across several platforms: sunxi, bcm53xx, at91,
nsp, ns2, ux500, omap
- a fix to correct an API change in the reset controllers
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
arm64: dts: NS2: Add dma-coherent to relevant DT entries
reset: fix optional reset_control_get stubs to return NULL
ARM: sun8i: a23/a33: drop bl_en_pin GPIO pinmux in reference design DTSI
ARM: dts: sun7i: lamobo-r1: Fix CPU port RGMII settings
ARM: dts: NSP: GPIO reboot open-source
ARM: at91: pm: cpu_idle: switch DDR to power-down mode
ARM: dts: add the AB8500 clocks to the device tree
ARM: dts: imx6sx-udoo-neo: Fix reboot hang
ARM: sun8i: Fix the mali clock rate
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
ARM: dts: BCM5301X: Fix memory start address
ARM: dts: BCM5301X: Fix UARTs on bcm953012k
Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node"
ARM: OMAP2+: Release device node after it is no longer needed.
ARM: OMAP2+: Fix device node reference counts
ARM: OMAP2+: Remove legacy gpmc-nand.c
ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure
ARM: dts: am335x-pcm953: Fix legacy wakeup source binding
ARM: omap2plus_defconfig: Enable INPUT_MOUSEDEV as loadable modules
ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJY1R3+AAoJELDendYovxMvw9sIAIGwXhdN9hh7vxIj8seVQyky
3Cr58C9kVfZfWSeZt8g/SEvswo45E64QprggoaMJZwMXVVltJhBhd2jnFkMgtTks
08gk1O3/bMxHd9lXfUBVNwuRpWLVn/r8i4D94j3mJvC6EX7BBZ/aR0Nmm7jRbL0t
RK6U1TpyKdVJmlZT7hwk+oQht56Ohfay+74Kh/Bww0YixjRB1xwedHHy5AHi9lRh
T8WXIFj8SRk7azhY42q383L1lbVzU1hIMLqQoLvsmtDTbFmliBJtvELWAduZJ99j
zUCr6QqJw2GgJ+YHGlI0XJVRbPA484B3ufl1AwQ6H2byeHq+ZxlUI1Bh7YHkLGc=
=3HTs
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.11b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Fixes for PM under Xen"
* tag 'for-linus-4.11b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/acpi: upload PM state from init-domain to Xen
xen/acpi: Replace hard coded "ACPI0007"
Shaohua Li
Paolo Bonzini
Ladi Prosek
Herongguang (Stephen)
Linus Torvalds
Qiuxu Zhuo
Theodore Ts'o
Arnd Bergmann
Eric Biggers
Sagi Grimberg
David Marchand
Dmitry V. Levin
Bart Van Assche
Leon Romanovsky
Dan Carpenter
Aditya Sarwade
Adit Ranadive
Ratna Manoj Bolla
Josef Bacik
Jens Axboe