Граф коммитов

3967 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 91bc482ec5 Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: create rcu_my_thread_group_empty() wrapper
  memcg: css_id() must be called under rcu_read_lock()
  cgroup: Check task_lock in task_subsys_state()
  sched: Fix an RCU warning in print_task()
  cgroup: Fix an RCU warning in alloc_css_id()
  cgroup: Fix an RCU warning in cgroup_path()
  KEYS: Fix an RCU warning in the reading of user keys
  KEYS: Fix an RCU warning
2010-05-07 13:58:21 -07:00
Zhang, Yanmin 111c7d8243 slub: Fix bad boundary check in init_kmem_cache_nodes()
Function init_kmem_cache_nodes is incorrect when checking upper limitation of
kmalloc_caches. The breakage was introduced by commit
91efd773c7 ("dma kmalloc handling fixes").

Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2010-05-05 21:12:19 +03:00
Paul E. McKenney ad4ba37537 memcg: css_id() must be called under rcu_read_lock()
This patch fixes task_in_mem_cgroup(), mem_cgroup_uncharge_swapcache(),
mem_cgroup_move_swap_account(), and is_target_pte_for_mc() to protect
calls to css_id().  An additional RCU lockdep splat was reported for
memcg_oom_wake_function(), however, this function is not yet in
mainline as of 2.6.34-rc5.

Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Tested-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
2010-05-04 09:25:03 -07:00
Linus Torvalds 970b06485f Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  coda: move backing-dev.h kernel include inside __KERNEL__
  mtd: ensure that bdi entries are properly initialized and registered
  Move mtd_bdi_*mappable to mtdcore.c
  btrfs: convert to using bdi_setup_and_register()
  Catch filesystems lacking s_bdi
  drbd: Terminate a connection early if sending the protocol fails
  drbd: fix memory leak
  Fix JFFS2 sync silent failure
  smbfs: add bdi backing to mount session
  ncpfs: add bdi backing to mount session
  exofs: add bdi backing to mount session
  ecryptfs: add bdi backing to mount session
  coda: add bdi backing to mount session
  cifs: add bdi backing to mount session
  afs: add bdi backing to mount session.
  9p: add bdi backing to mount session
  bdi: add helper function for doing init and register of a bdi for a file system
  block: ensure jiffies wrap is handled correctly in blk_rq_timed_out_timer
2010-04-28 07:56:05 -07:00
Rik van Riel 5892753383 mmap: check ->vm_ops before dereferencing
Check whether the VMA has a vm_ops before calling close, just
like we check vm_ops before calling open a few dozen lines
higher up in the function.

Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-27 08:26:51 -07:00
Jörn Engel 5129a469a9 Catch filesystems lacking s_bdi
noop_backing_dev_info is used only as a flag to mark filesystems that
don't have any backing store, like tmpfs, procfs, spufs, etc.

Signed-off-by: Joern Engel <joern@logfs.org>

Changed the BUG_ON() to a WARN_ON(). Note that adding dirty inodes
to the noop_backing_dev_info is not legal and will not result in
them being flushed, but we already catch this condition in
__mark_inode_dirty() when checking for a registered bdi.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-25 08:54:42 +02:00
Dan Carpenter 22eccdd7d2 ksm: check for ERR_PTR from follow_page()
The follow_page() function can potentially return -EFAULT so I added
checks for this.

Also I silenced an uninitialized variable warning on my version of gcc
(version 4.3.2).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Izik Eidus <ieidus@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24 11:31:26 -07:00
Oleg Nesterov 31f2b0ebc0 rmap: anon_vma_prepare() can leak anon_vma_chain
If find_mergeable_anon_vma() succeeds but another thread installs
->anon_vma before we take ptl, then allocated == NULL but avc should be
freed.  Change the code to check avc != NULL to detect this case.

Also, a couple of whitespace changes to make the critical section more
visible.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24 11:31:25 -07:00
Mel Gorman 23be7468e8 hugetlb: fix infinite loop in get_futex_key() when backed by huge pages
If a futex key happens to be located within a huge page mapped
MAP_PRIVATE, get_futex_key() can go into an infinite loop waiting for a
page->mapping that will never exist.

See https://bugzilla.redhat.com/show_bug.cgi?id=552257 for more details
about the problem.

This patch makes page->mapping a poisoned value that includes
PAGE_MAPPING_ANON mapped MAP_PRIVATE.  This is enough for futex to
continue but because of PAGE_MAPPING_ANON, the poisoned value is not
dereferenced or used by futex.  No other part of the VM should be
dereferencing the page->mapping of a hugetlbfs page as its page cache is
not on the LRU.

This patch fixes the problem with the test case described in the bugzilla.

[akpm@linux-foundation.org: mel cant spel]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Darren Hart <darren@dvhart.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24 11:31:25 -07:00
Andrea Arcangeli 93d5c9be1d memcg: fix prepare migration
If a signal is pending (task being killed by sigkill)
__mem_cgroup_try_charge will write NULL into &mem, and css_put will oops
on null pointer dereference.

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
  IP: [<ffffffff810fc6cc>] mem_cgroup_prepare_migration+0x7c/0xc0
  PGD a5d89067 PUD a5d8a067 PMD 0
  Oops: 0000 [#1] SMP
  last sysfs file: /sys/devices/platform/microcode/firmware/microcode/loading
  CPU 0
  Modules linked in: nfs lockd nfs_acl auth_rpcgss sunrpc acpi_cpufreq pcspkr sg [last unloaded: microcode]

  Pid: 5299, comm: largepages Tainted: G        W  2.6.34-rc3 #3 Penryn1600SLI-110dB/To Be Filled By O.E.M.
  RIP: 0010:[<ffffffff810fc6cc>]  [<ffffffff810fc6cc>] mem_cgroup_prepare_migration+0x7c/0xc0

[nishimura@mxp.nes.nec.co.jp: fix merge issues]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-24 11:31:24 -07:00
Jens Axboe c3c532061e bdi: add helper function for doing init and register of a bdi for a file system
Pretty trivial helper, just sets up the bdi and registers it. An atomic
sequence count is used to ensure that the registered sysfs names are
unique.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-22 11:39:36 +02:00
Rik van Riel e8a03feb54 rmap: add exclusively owned pages to the newest anon_vma
The recent anon_vma fixes cause many anonymous pages to end up
in the parent process anon_vma, even when the page is exclusively
owned by the current process.

Adding exclusively owned anonymous pages to the top anon_vma
reduces rmap scanning overhead, especially in workloads with
forking servers.

This patch adds a parameter to __page_set_anon_rmap that can
be used to indicate whether or not the added page is exclusively
owned by the current process.

Pages added through page_add_new_anon_rmap are exclusively
owned by the current process, and can be added to the top
anon_vma.

Pages added through page_add_anon_rmap can be either shared
or exclusively owned, so we do the conservative thing and
add it to the oldest anon_vma.

A next step would be to add the exclusive parameter to
page_add_anon_rmap, to be used from functions where we do
know for sure whether a page is exclusively owned.

Signed-off-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Lightly-tested-by: Borislav Petkov <bp@alien8.de>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
[ Edited to look nicer  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-19 16:28:20 -07:00
Linus Torvalds ea90002b0f anonvma: when setting up page->mapping, we need to pick the _oldest_ anonvma
Otherwise we might be mapping in a page in a new mapping, but that page
(through the swapcache) would later be mapped into an old mapping too.
The page->mapping must be the case that works for everybody, not just
the mapping that happened to page it in first.

Here's the scenario:

 - page gets allocated/mapped by process A. Let's call the anon_vma we
   associate the page with 'A' to keep it easy to track.

 - Process A forks, creating process B. The anon_vma in B is 'B', and has
   a chain that looks like 'B' -> 'A'. Everything is fine.

 - Swapping happens. The page (with mapping pointing to 'A') gets swapped
   out (perhaps not to disk - it's enough to assume that it's just not
   mapped any more, and lives entirely in the swap-cache)

 - Process B pages it in, which goes like this:

        do_swap_page ->
          page = lookup_swap_cache(entry);
         ...
          set_pte_at(mm, address, page_table, pte);
          page_add_anon_rmap(page, vma, address);

   And think about what happens here!

   In particular, what happens is that this will now be the "first"
   mapping of that page, so page_add_anon_rmap() used to do

        if (first)
                __page_set_anon_rmap(page, vma, address);

   and notice what anon_vma it will use? It will use the anon_vma for
   process B!

   What happens then? Trivial: process 'A' also pages it in (nothing
   happens, it's not the first mapping), and then process 'B' execve's
   or exits or unmaps, making anon_vma B go away.

   End result: process A has a page that points to anon_vma B, but
   anon_vma B does not exist any more.  This can go on forever.  Forget
   about RCU grace periods, forget about locking, forget anything like
   that.  The bug is simply that page->mapping points to an anon_vma
   that was correct at one point, but was _not_ the one that was shared
   by all users of that possible mapping.

Changing it to always use the deepest anon_vma in the anonvma chain gets
us to the safest model.

This can be improved in certain cases: if we know the page is private to
just this particular mapping (for example, it's a new page, or it is the
only swapcache entry), we could pick the top (most specific) anon_vma.

But that's a future optimization. Make it _work_ reliably first.

Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Borislav Petkov <bp@alien8.de> [ "What do you know, I think you fixed it!" ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-12 17:54:13 -07:00
Linus Torvalds 646d87b481 anon_vma: clone the anon_vma chain in the right order
We want to walk the chain in reverse order when cloning it, so that the
order of the result chain will be the same as the order in the source
chain.  When we add entries to the chain, they go at the head of the
chain, so we want to add the source head last.

Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Borislav Petkov <bp@alien8.de> [ "No, it still oopses" ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-12 17:54:12 -07:00
Linus Torvalds 287d97ac03 vma_adjust: fix the copying of anon_vma chains
When we move the boundaries between two vma's due to things like
mprotect, we need to make sure that the anon_vma of the pages that got
moved from one vma to another gets properly copied around.  And that was
not always the case, in this rather hard-to-follow code sequence.

Clarify the code, and fix it so that it copies the anon_vma from the
right source.

Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Borislav Petkov <bp@alien8.de> [ "Yeah, not so much this one either" ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-12 17:54:11 -07:00
Linus Torvalds d0e9fe1758 Simplify and comment on anon_vma re-use for anon_vma_prepare()
This changes the anon_vma reuse case to require that we only reuse
simple anon_vma's - ie the case when the vma only has a single anon_vma
associated with it.

This means that a reuse of an anon_vma from an adjacent vma will always
guarantee that both vma's are associated not only with the same
anon_vma, they will also have the same anon_vma chain (of just a single
entry in this case).

And since anon_vma re-use was the only case where the same anon_vma
might be associated with different chains of anon_vma's, we now have the
case that every vma that shares the same anon_vma will always also have
the same chain.  That makes it much easier to think about merging vma's
that share the same anon_vma's: you can always just drop the other
anon_vma chain in anon_vma_merge() since you know that they are always
identical.

This also splits up the function to validate the anon_vma re-use, and
adds a lot of commentary about the possible races.

Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Borislav Petkov <bp@alien8.de> [ "That didn't fix it" ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-12 17:53:59 -07:00
Linus Torvalds 2f4084209a Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (34 commits)
  cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch
  loop: Update mtime when writing using aops
  block: expose the statistics in blkio.time and blkio.sectors for the root cgroup
  backing-dev: Handle class_create() failure
  Block: Fix block/elevator.c elevator_get() off-by-one error
  drbd: lc_element_by_index() never returns NULL
  cciss: unlock on error path
  cfq-iosched: Do not merge queues of BE and IDLE classes
  cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging
  i2o: Remove the dangerous kobj_to_i2o_device macro
  block: remove 16 bytes of padding from struct request on 64bits
  cfq-iosched: fix a kbuild regression
  block: make CONFIG_BLK_CGROUP visible
  Remove GENHD_FL_DRIVERFS
  block: Export max number of segments and max segment size in sysfs
  block: Finalize conversion of block limits functions
  block: Fix overrun in lcm() and move it to lib
  vfs: improve writeback_inodes_wb()
  paride: fix off-by-one test
  drbd: fix al-to-on-disk-bitmap for 4k logical_block_size
  ...
2010-04-09 11:50:29 -07:00
Pekka Enberg d3e06e2b15 slub: Fix kmem_ptr_validate() for non-kernel pointers
As suggested by Linus, fix up kmem_ptr_validate() to handle non-kernel pointers
more graciously. The patch changes kmem_ptr_validate() to use the newly
introduced kern_ptr_validate() helper to check that a pointer is a valid kernel
pointer before we attempt to convert it into a 'struct page'.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-09 10:09:50 -07:00
Pekka Enberg fc1c183353 slab: Generify kernel pointer validation
As suggested by Linus, introduce a kern_ptr_validate() helper that does some
sanity checks to make sure a pointer is a valid kernel pointer.  This is a
preparational step for fixing SLUB kmem_ptr_validate().

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-09 10:09:50 -07:00
Linus Torvalds fb1ae63577 Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards
  x86: Increase CONFIG_NODES_SHIFT max to 10
  ibft, x86: Change reserve_ibft_region() to find_ibft_region()
  x86, hpet: Fix bug in RTC emulation
  x86, hpet: Erratum workaround for read after write of HPET comparator
  bootmem, x86: Fix 32bit numa system without RAM on node 0
  nobootmem, x86: Fix 32bit numa system without RAM on node 0
  x86: Handle overlapping mptables
  x86: Make e820_remove_range to handle all covered case
  x86-32, resume: do a global tlb flush in S4 resume
2010-04-07 11:02:23 -07:00
KAMEZAWA Hiroyuki 8725d54162 memcg: fix race in file_mapped accounting
Presently, memcg's FILE_MAPPED accounting has following race with
move_account (happens at rmdir()).

    increment page->mapcount (rmap.c)
    mem_cgroup_update_file_mapped()           move_account()
					      lock_page_cgroup()
					      check page_mapped() if
					      page_mapped(page)>1 {
						FILE_MAPPED -1 from old memcg
						FILE_MAPPED +1 to old memcg
					      }
					      .....
					      overwrite pc->mem_cgroup
					      unlock_page_cgroup()
    lock_page_cgroup()
    FILE_MAPPED + 1 to pc->mem_cgroup
    unlock_page_cgroup()

Then,
	old memcg (-1 file mapped)
	new memcg (+2 file mapped)

This happens because move_account see page_mapped() which is not guarded
by lock_page_cgroup().  This patch adds FILE_MAPPED flag to page_cgroup
and move account information based on it.  Now, all checks are synchronous
with lock_page_cgroup().

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@in.ibm.com>
Reviewed-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Andrea Righi <arighi@develer.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:05 -07:00
Naoya Horiguchi 116354d177 pagemap: fix pfn calculation for hugepage
When we look into pagemap using page-types with option -p, the value of
pfn for hugepages looks wrong (see below.) This is because pte was
evaluated only once for one vma although it should be updated for each
hugepage.  This patch fixes it.

  $ page-types -p 3277 -Nl -b huge
  voffset   offset  len     flags
  7f21e8a00 11e400  1       ___U___________H_G________________
  7f21e8a01 11e401  1ff     ________________TG________________
               ^^^
  7f21e8c00 11e400  1       ___U___________H_G________________
  7f21e8c01 11e401  1ff     ________________TG________________
               ^^^

One hugepage contains 1 head page and 511 tail pages in x86_64 and each
two lines represent each hugepage.  Voffset and offset mean virtual
address and physical address in the page unit, respectively.  The
different hugepages should not have the same offset value.

With this patch applied:

  $ page-types -p 3386 -Nl -b huge
  voffset   offset   len    flags
  7fec7a600 112c00   1      ___UD__________H_G________________
  7fec7a601 112c01   1ff    ________________TG________________
               ^^^
  7fec7a800 113200   1      ___UD__________H_G________________
  7fec7a801 113201   1ff    ________________TG________________
               ^^^
               OK

More info:

- This patch modifies walk_page_range()'s hugepage walker.  But the
  change only affects pagemap_read(), which is the only caller of hugepage
  callback.

- Without this patch, hugetlb_entry() callback is called per vma, that
  doesn't match the natural expectation from its name.

- With this patch, hugetlb_entry() is called per hugepte entry and the
  callback can become much simpler.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:04 -07:00
KOSAKI Motohiro d6da1a5abc mm: revert "vmscan: get_scan_ratio() cleanup"
Shaohua Li reported his tmpfs streaming I/O test can lead to make oom.
The test uses a 6G tmpfs in a system with 3G memory.  In the tmpfs, there
are 6 copies of kernel source and the test does kbuild for each copy.  His
investigation shows the test has a lot of rotated anon pages and quite few
file pages, so get_scan_ratio calculates percent[0] (i.e.  scanning
percent for anon) to be zero.  Actually the percent[0] shoule be a big
value, but our calculation round it to zero.

Although before commit 84b18490 ("vmscan: get_scan_ratio() cleanup") , we
have the same problem too.  But the old logic can rescue percent[0]==0
case only when priority==0.  It had hided the real issue.  I didn't think
merely streaming io can makes percent[0]==0 && priority==0 situation.  but
I was wrong.

So, definitely we have to fix such tmpfs streaming io issue.  but anyway I
revert the regression commit at first.

This reverts commit 84b18490d1.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: Shaohua Li <shaohua.li@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:03 -07:00
Wu Fengguang 70655c06bd readahead: fix NULL filp dereference
btrfs relocate_file_extent_cluster() calls us with NULL filp:

  [ 4005.426805] BUG: unable to handle kernel NULL pointer dereference at 00000021
  [ 4005.426818] IP: [<c109a130>] page_cache_sync_readahead+0x18/0x3e

Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Cc: Yan Zheng <yanzheng@21cn.com>
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Tested-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:03 -07:00
KAMEZAWA Hiroyuki a3a2e76c77 mm: avoid null-pointer deref in sync_mm_rss()
- We weren't zeroing p->rss_stat[] at fork()

- Consequently sync_mm_rss() was dereferencing tsk->mm for kernel
  threads and was oopsing.

- Make __sync_task_rss_stat() static, too.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15648

[akpm@linux-foundation.org: remove the BUG_ON(!mm->rss)]
Reported-by: Troels Liebe Bentsen <tlb@rapanden.dk>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
"Michael S. Tsirkin" <mst@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-07 08:38:02 -07:00
Linus Torvalds b66696e3c0 Merge branch 'slabh' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc
* 'slabh' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc:
  eeepc-wmi: include slab.h
  staging/otus: include slab.h from usbdrv.h
  percpu: don't implicitly include slab.h from percpu.h
  kmemcheck: Fix build errors due to missing slab.h
  include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
  iwlwifi: don't include iwl-dev.h from iwl-devtrace.h
  x86: don't include slab.h from arch/x86/include/asm/pgtable_32.h

Fix up trivial conflicts in include/linux/percpu.h due to
is_kernel_percpu_address() having been introduced since the slab.h
cleanup with the percpu_up.c splitup.
2010-04-05 09:39:11 -07:00
Linus Torvalds 9e74e7c81a Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  module: add stub for is_module_percpu_address
  percpu, module: implement and use is_kernel/module_percpu_address()
  module: encapsulate percpu handling better and record percpu_size
2010-04-05 09:16:37 -07:00
Rik van Riel 4946d54cb5 rmap: fix anon_vma_fork() memory leak
Fix a memory leak in anon_vma_fork(), where we fail to tear down the
anon_vmas attached to the new VMA in case setting up the new anon_vma
fails.

This bug also has the potential to leave behind anon_vma_chain structs
with pointers to invalid memory.

Reported-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-04-05 09:15:51 -07:00
Anton Blanchard 1442145373 backing-dev: Handle class_create() failure
I hit this when we had a bug in IDR for a few days. Basically sysfs would
fail to create new inodes since it uses an IDR and therefore class_create would
fail.

While we are unlikely to see this fail we may as well handle it instead of
oopsing.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-04-02 09:46:55 +02:00
Yinghai Lu aa235fc712 bootmem, x86: Fix 32bit numa system without RAM on node 0
When 32bit numa is used, free_all_bootmem() will still only go over with
node id 0.

If node 0 doesn't have RAM installed, the lowest populated node
becomes low RAM.

This one fixes BOOTMEM path by iterating over the bdata_list.

-v3: add more comments, and fix bootmem path too.
-v4: seperate from one big patch

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4BB416D7.6090203@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-04-01 14:41:19 -07:00
Yinghai Lu 337998587f nobootmem, x86: Fix 32bit numa system without RAM on node 0
On one system without RAM on node0, got following boot dump with a 32
bit NUMA kernel:

early_node_map[4] active PFN ranges
    1: 0x00000010 -> 0x00000099
    1: 0x00000100 -> 0x0007da00
    1: 0x0007e800 -> 0x0007ffa0
    1: 0x0007ffae -> 0x0007ffb0
...
Subtract (29 early reservations)
  #000 [0000001000 - 0000002000]
  #001 [0000089000 - 000008f000]
  #002 [0000091000 - 0000093500]
...
  #027 [007cbfef40 - 007e800000]
  #028 [007e9ca000 - 007ff95000]
(0 free memory ranges)
Initializing HighMem for node 0 (00000000:00000000)
Initializing HighMem for node 1 (00000000:00000000)
Memory: 0k/2096832k available (6662k kernel code, 2096300k reserved, 4829k data, 484k init, 0k highmem)
...
Checking if this processor honours the WP bit even in supervisor mode...Ok.
swapper: page allocation failure. order:0, mode:0x0
Pid: 0, comm: swapper Not tainted 2.6.34-rc3-tip-03818-g4b1ea6c-dirty #35
Call Trace:
 [<4087a5dc>] ? printk+0xf/0x11
 [<40286728>] __alloc_pages_nodemask+0x417/0x487
 [<402a9ce1>] new_slab+0xe2/0x1fe
 [<402aa5b2>] kmem_cache_open+0x185/0x358
 [<402abbc0>] T.954+0x1c/0x60
 [<40d52a29>] kmem_cache_init+0x24/0x113
 [<40d39738>] start_kernel+0x166/0x2e4
 [<40d3940e>] ? unknown_bootoption+0x0/0x18e
 [<40d390ce>] i386_start_kernel+0xce/0xd5
Mem-Info:
Node 1 DMA per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
Node 1 Normal per-cpu:
CPU    0: hi:    0, btch:   1 usd:   0
active_anon:0 inactive_anon:0 isolated_anon:0
 active_file:0 inactive_file:0 isolated_file:0
 unevictable:0 dirty:0 writeback:0 unstable:0
 free:0 slab_reclaimable:0 slab_unreclaimable:0
 mapped:0 shmem:0 pagetables:0 bounce:0

When 32bit NUMA is used, free_all_bootmem() will still only go over with
node id 0.

If node 0 doesn't have RAM installed, We need to go with node1
because early_node_map still use 1 for all ranges, and ram from node1
become low ram.

Use MAX_NUMNODES like 64-bit NUMA does.

Note: BOOTMEM path has the same problem.
      this bug exist before We have NO_BOOTMEM support.

-v3: add more comments, and fix bootmem path too.
-v4: seperate bootmem path fix

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4BB41689.9090502@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-04-01 14:39:29 -07:00
Tejun Heo de380b55f9 percpu: don't implicitly include slab.h from percpu.h
percpu.h has always been including slab.h to get k[mz]alloc/free() for
UP inline implementation.  percpu.h being used by very low level
headers including module.h and sched.h, this meant that a lot files
unintentionally got slab.h inclusion.

Lee Schermerhorn was trying to make topology.h use percpu.h and got
bitten by this implicit inclusion.  The right thing to do is break
this ultimately unnecessary dependency.  The previous patch added
explicit inclusion of either gfp.h or slab.h to the source files using
them.  This patch updates percpu.h such that slab.h is no longer
included from percpu.h.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Randy Dunlap ea5a9f0c34 kmemcheck: Fix build errors due to missing slab.h
mm/kmemcheck.c:69: error: dereferencing pointer to incomplete type
mm/kmemcheck.c:69: error: 'SLAB_NOTRACK' undeclared (first use in this function)
mm/kmemcheck.c:82: error: dereferencing pointer to incomplete type
mm/kmemcheck.c:94: error: dereferencing pointer to incomplete type
mm/kmemcheck.c:94: error: dereferencing pointer to incomplete type
mm/kmemcheck.c:94: error: 'SLAB_DESTROY_BY_RCU' undeclared (first use in this function)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2010-03-30 22:02:32 +09:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Tejun Heo 10fad5e46f percpu, module: implement and use is_kernel/module_percpu_address()
lockdep has custom code to check whether a pointer belongs to static
percpu area which is somewhat broken.  Implement proper
is_kernel/module_percpu_address() and replace the custom code.

On UP, percpu variables are regular static variables and can't be
distinguished from them.  Always return %false on UP.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Ingo Molnar <mingo@redhat.com>
2010-03-29 23:07:12 +09:00
Linus Torvalds 8128f55a0b Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Remove excessive early_res debug output
  softlockup: Stop spurious softlockup messages due to overflow
  rcu: Fix local_irq_disable() CONFIG_PROVE_RCU=y false positives
  rcu: Fix tracepoints & lockdep false positive
  rcu: Make rcu_read_lock_bh_held() allow for disabled BH
2010-03-26 15:08:31 -07:00
David Howells e1ee65d859 NOMMU: Fix __get_user_pages() to pin last page on offset buffers
Fix __get_user_pages() to make it pin the last page on a buffer that doesn't
begin at the start of a page, but is a multiple of PAGE_SIZE in size.

The problem is that __get_user_pages() advances the pointer too much when it
iterates to the next page if the page it's currently looking at isn't used from
the first byte.  This can cause the end of a short VMA to be reached
prematurely, resulting in the last page being lost.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-25 14:13:27 -07:00
David Howells 7561e8ca0d NOMMU: Revert 'nommu: get_user_pages(): pin last page on non-page-aligned start'
Revert the following patch:

	commit c08c6e1f54
	Author: Steven J. Magnani <steve@digidescorp.com>
	Date:   Fri Mar 5 13:42:24 2010 -0800

	nommu: get_user_pages(): pin last page on non-page-aligned start

As it assumes that the mappings begin at the start of pages - something that
isn't necessarily true on NOMMU systems.  On NOMMU systems, it is possible for
a mapping to only occupy part of the page, and not necessarily touch either end
of it; in fact it's also possible for multiple non-overlapping mappings to
coexist on one page (consider direct mappings of ROMFS files, for example).

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-25 14:13:26 -07:00
Lee Schermerhorn c6b6ef8bb0 mempolicy: fix get_mempolicy() for relative and static nodes
Discovered while testing other mempolicy changes:

get_mempolicy() does not handle static/relative mode flags correctly.
Return the value that the user specified so that it can be restored
via set_mempolicy() if desired.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:22 -07:00
Michael S. Tsirkin 298359c5bf exit: fix oops in sync_mm_rss
In 2.6.34-rc1, removing vhost_net module causes an oops in sync_mm_rss
(called from do_exit) when workqueue is destroyed.  This does not happen
on net-next, or with vhost on top of to 2.6.33.

The issue seems to be introduced by
34e55232e5 ("mm: avoid false sharing of
mm_counter) which added sync_mm_rss() that is passed task->mm, and
dereferences it without checking.  If task is a kernel thread, mm might be
NULL.  I think this might also happen e.g.  with aio.

This patch fixes the oops by calling sync_mm_rss when task->mm is set to
NULL.  I also added BUG_ON to detect any other cases where counters get
incremented while mm is NULL.

The oops I observed looks like this:

BUG: unable to handle kernel NULL pointer dereference at 00000000000002a8
IP: [<ffffffff810b436d>] sync_mm_rss+0x33/0x6f
PGD 0
Oops: 0002 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu7/cache/index2/shared_cpu_map
CPU 2
Modules linked in: vhost_net(-) tun bridge stp sunrpc ipv6 cpufreq_ondemand acpi_cpufreq freq_table kvm_intel kvm i5000_edac edac_core rtc_cmos bnx2 button i2c_i801 i2c_core rtc_core e1000e sg joydev ide_cd_mod serio_raw pcspkr rtc_lib cdrom virtio_net virtio_blk virtio_pci virtio_ring virtio af_packet e1000 shpchp aacraid uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]

Pid: 2046, comm: vhost Not tainted 2.6.34-rc1-vhost #25 System Planar/IBM System x3550 -[7978B3G]-
RIP: 0010:[<ffffffff810b436d>]  [<ffffffff810b436d>] sync_mm_rss+0x33/0x6f
RSP: 0018:ffff8802379b7e60  EFLAGS: 00010202
RAX: 0000000000000008 RBX: ffff88023f2390c0 RCX: 0000000000000000
RDX: ffff88023f2396b0 RSI: 0000000000000000 RDI: ffff88023f2390c0
RBP: ffff8802379b7e60 R08: 0000000000000000 R09: 0000000000000000
R10: ffff88023aecfbc0 R11: 0000000000013240 R12: 0000000000000000
R13: ffffffff81051a6c R14: ffffe8ffffc0f540 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff880001e80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00000000000002a8 CR3: 000000023af23000 CR4: 00000000000406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process vhost (pid: 2046, threadinfo ffff8802379b6000, task ffff88023f2390c0)
Stack:
 ffff8802379b7ee0 ffffffff81040687 ffffe8ffffc0f558 ffffffffa00a3e2d
<0> 0000000000000000 ffff88023f2390c0 ffffffff81055817 ffff8802379b7e98
<0> ffff8802379b7e98 0000000100000286 ffff8802379b7ee0 ffff88023ad47d78
Call Trace:
 [<ffffffff81040687>] do_exit+0x147/0x6c4
 [<ffffffffa00a3e2d>] ? handle_rx_net+0x0/0x17 [vhost_net]
 [<ffffffff81055817>] ? autoremove_wake_function+0x0/0x39
 [<ffffffff81051a6c>] ? worker_thread+0x0/0x229
 [<ffffffff810553c9>] kthreadd+0x0/0xf2
 [<ffffffff810038d4>] kernel_thread_helper+0x4/0x10
 [<ffffffff81055342>] ? kthread+0x0/0x87
 [<ffffffff810038d0>] ? kernel_thread_helper+0x0/0x10
Code: 00 8b 87 6c 02 00 00 85 c0 74 14 48 98 f0 48 01 86 a0 02 00 00 c7 87 6c 02 00 00 00 00 00 00 8b 87 70 02 00 00 85 c0 74 14 48 98 <f0> 48 01 86 a8 02 00 00 c7 87 70 02 00 00 00 00 00 00 8b 87 74
RIP  [<ffffffff810b436d>] sync_mm_rss+0x33/0x6f
 RSP <ffff8802379b7e60>
CR2: 00000000000002a8
---[ end trace 41603ba922beddd2 ]---
Fixing recursive fault but reboot is needed!

(note: handle_rx_net is a work item using workqueue in question).
sync_mm_rss+0x33/0x6f gave me a hint. I also tried reverting
34e55232e5 and the oops goes away.

The module in question calls use_mm and later unuse_mm from a kernel
thread.  It is when this kernel thread is destroyed that the crash
happens.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:21 -07:00
KOSAKI Motohiro 926f2ae04f tmpfs: cleanup mpol_parse_str()
mpol_parse_str() made lots 'err' variable related bug.  Because it is ugly
and reviewing unfriendly.

This patch simplifies it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:21 -07:00
KOSAKI Motohiro 12821f5fb9 tmpfs: handle MPOL_LOCAL mount option properly
commit 71fe804b6d (mempolicy: use struct mempolicy pointer in
shmem_sb_info) added mpol=local mount option.  but its feature is broken
since it was born.  because such code always return 1 (i.e.  mount
failure).

This patch fixes it.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:21 -07:00
KOSAKI Motohiro d69b2e63e9 tmpfs: mpol=bind:0 don't cause mount error.
Currently, following mount operation cause mount error.

% mount -t tmpfs -ompol=bind:0 none /tmp

Because commit 71fe804b6d (mempolicy: use struct mempolicy pointer in
shmem_sb_info) corrupted MPOL_BIND parse code.

This patch restore the needed one.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Ravikiran Thirumalai <kiran@scalex86.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:21 -07:00
Ravikiran G Thirumalai 413b43deab tmpfs: fix oops on mounts with mpol=default
Fix an 'oops' when a tmpfs mount point is mounted with the mpol=default
mempolicy.

Upon remounting a tmpfs mount point with 'mpol=default' option, the mount
code crashed with a null pointer dereference.  The initial problem report
was on 2.6.27, but the problem exists in mainline 2.6.34-rc as well.  On
examining the code, we see that mpol_new returns NULL if default mempolicy
was requested.  This 'NULL' mempolicy is accessed to store the node mask
resulting in oops.

The following patch fixes it.

Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:21 -07:00
Robin Holt cb53237513 mm/ksm.c is doing an unneeded _notify in write_protect_page.
ksm.c's write_protect_page implements a lockless means of verifying a page
does not have any users of the page which are not accounted for via other
kernel tracking means.  It does this by removing the writable pte with TLB
flushes, checking the page_count against the total known users, and then
using set_pte_at_notify to make it a read-only entry.

An unneeded mmu_notifier callout is made in the case where the known users
does not match the page_count.  In that event, we are inserting the
identical pte and there is no need for the set_pte_at_notify, but rather
the simpler set_pte_at suffices.

Signed-off-by: Robin Holt <holt@sgi.com>
Acked-by: Izik Eidus <ieidus@redhat.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Chris Wright <chrisw@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:20 -07:00
David Howells 3fa30460ea nommu: fix an incorrect comment in the do_mmap_shared_file()
Fix an incorrect comment in the do_mmap_shared_file().  If a mapping is
requested MAP_SHARED, then a private copy cannot be made and still provide
correct semantics.

Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: Dave Hudson <uclinux@blueteddy.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:20 -07:00
Dan Carpenter e7bbcdf374 memcontrol: fix potential null deref
There was a potential null deref introduced in c62b1a3b31 ("memcg: use
generic percpu instead of private implementation").

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:19 -07:00
Daisuke Nishimura 5cfb80a73b memcg: disable move charge in no mmu case
In commit 02491447 ("memcg: move charges of anonymous swap"), I tried to
disable move charge feature in no mmu case by enclosing all the related
functions with "#ifdef CONFIG_MMU", but the commit places these ifdefs in
wrong place.  (it seems that it's mangled while handling some fixes...)

This patch fixes it up.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-24 16:31:19 -07:00
Jiri Kosina c26f91a3df x86: Remove excessive early_res debug output
Commit 08677214e3 ("x86: Make 64 bit use early_res instead
of bootmem  before slab") introduced early_res replacement for
bootmem, but left code  in __free_pages_memory() which dumps all
the ranges that are beeing freed,  without any additional
information, causing some noise in dmesg during  bootup.

Just remove printing of the ranges, that doesn't provide
anything useful  anyway.

While at it, remove other commented-out KERN_DEBUG messages in
the NO_BOOTMEM code as well.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Found-OK-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <alpine.LNX.2.00.1003220931360.18642@pobox.suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-03-24 19:51:08 +01:00
KAMEZAWA Hiroyuki e9e58a4ec3 memcg: avoid use cmpxchg in swap cgroup maintainance
swap_cgroup uses 2bytes data and uses cmpxchg in a new operation.  2byte
cmpxchg/xchg is not available on some archs.  This patch replaces
cmpxchg/xchg with operations under lock.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reported-by: Sachin Sant <sachinp@in.ibm.com> wrote:
Acked-by: Balbir Singh <balbir@in.ibm.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-17 18:43:47 -07:00