Граф коммитов

97 Коммитов

Автор SHA1 Сообщение Дата
Rafael J. Wysocki 6cbf82148f PCI PM: Run-time callbacks for PCI bus type
Introduce run-time PM callbacks for the PCI bus type.  Make the new
callbacks work in analogy with the existing system sleep PM
callbacks, so that the drivers already converted to struct dev_pm_ops
can use their suspend and resume routines for run-time PM without
modifications.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22 16:21:19 -08:00
Linus Torvalds 4406c56d0a Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (75 commits)
  PCI hotplug: clean up acpi_run_hpp()
  PCI hotplug: acpiphp: use generic pci_configure_slot()
  PCI hotplug: shpchp: use generic pci_configure_slot()
  PCI hotplug: pciehp: use generic pci_configure_slot()
  PCI hotplug: add pci_configure_slot()
  PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface
  PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridge
  PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluation
  PCI: Clear saved_state after the state has been restored
  PCI PM: Return error codes from pci_pm_resume()
  PCI: use dev_printk in quirk messages
  PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset()
  PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle
  PCI Hotplug: acpiphp: find bridges the easy way
  PCI: pcie portdrv: remove unused variable
  PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support
  ACPI PM: Replace wakeup.prepared with reference counter
  PCI PM: Introduce device flag wakeup_prepared
  PCI / ACPI PM: Rework some debug messages
  PCI PM: Simplify PCI wake-up code
  ...

Fixed up conflict in arch/powerpc/kernel/pci_64.c due to OF device tree
scanning having been moved and merged for the 32- and 64-bit cases.  The
'needs_freset' initialization added in 6e19314cc ("PCI/powerpc: support
PCIe fundamental reset") is now in arch/powerpc/kernel/pci_of_scan.c.
2009-09-16 07:49:54 -07:00
Rafael J. Wysocki 4b77b0a2ba PCI: Clear saved_state after the state has been restored
Some PCI devices fail if their standard configuration registers are
restored twice in a row.  Prevent this from happening by making
pci_restore_state() clear the saved_state flag of the device right
after the device's standard configuration registers have been
populated with the previously saved values.

Simplify PCI PM callbacks by removing the direct clearing of
state_saved from them, as it shouldn't be necessary any more (except
in pci_pm_thaw(), where it has to be cleared, so that the values saved
during the "freeze" phase of hibernation are not used later by mistake).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-14 13:41:46 -07:00
Rafael J. Wysocki 999cce4a52 PCI PM: Return error codes from pci_pm_resume()
Currently pci_pm_resume() always returns 0, which makes the error
variable defined in there a bit pointless.  Make pci_pm_resume()
return error codes obtained from drivers' callbacks.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-14 13:41:42 -07:00
Tejun Heo 9dba910e9d PCI: separate out pci_add_dynid()
Separate out pci_add_dynid() from store_new_id() and export it so that
in-kernel code can add PCI IDs dynamically.  As the function will be
available regardless of HOTPLUG, put it and pull pci_free_dynids()
outside of CONFIG_HOTPLUG.

This will be used by pci-stub to initialize initial IDs via module
param.

While at it, remove bogus get_driver() failure check.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09 13:43:58 -07:00
Dmitry Torokhov 4b61bb575b Merge commit 'v2.6.31-rc8' into next 2009-08-27 22:00:20 -07:00
Alek Du c82f63e411 PCI: check saved state before restore
Without the check, the config space may be filled with zeros. Though
the driver should try to avoid call restoring before saving, but the
pci layer also should check this.

Also removes the existing check in pci_restore_standard_config, since
it's superfluous with the new check in restore_state.

Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-20 09:08:45 -07:00
Dmitry Torokhov 8150f32b90 Driver Core: Make PM operations a const pointer
They are not supposed to be modified by drivers, so make them const.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-07-24 22:11:32 -07:00
Linus Torvalds 90975ef712 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits)
  cpumask: remove cpumask allocation from idle_balance, fix
  numa, cpumask: move numa_node_id default implementation to topology.h, fix
  cpumask: remove cpumask allocation from idle_balance
  x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus
  x86: cpumask: update 32-bit APM not to mug current->cpus_allowed
  x86: microcode: cleanup
  x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c
  cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash
  numa, cpumask: move numa_node_id default implementation to topology.h
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  cpumask: remove x86 cpumask_t uses.
  cpumask: use cpumask_var_t in uv_flush_tlb_others.
  cpumask: remove cpumask_t assignment from vector_allocation_domain()
  cpumask: make Xen use the new operators.
  cpumask: clean up summit's send_IPI functions
  cpumask: use new cpumask functions throughout x86
  x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask
  cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  x86: unify 32 and 64-bit node_to_cpumask_map
  ...
2009-04-05 10:33:07 -07:00
Linus Torvalds e76e5b2c66 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
2009-04-01 09:47:12 -07:00
Rusty Russell 558f6ab910 Merge branch 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
Conflicts:

	arch/x86/include/asm/topology.h
	drivers/oprofile/buffer_sync.c
(Both cases: changed in Linus' tree, removed in Ingo's).
2009-03-31 13:33:50 +10:30
Rafael J. Wysocki 931ff68a5a PCI PM: Restore config spaces of all devices during early resume
At present the configuration spaces of PCI devices that have no
drivers or no PM support in the drivers (either legacy or through a
pm object) are not saved during suspend and, consequently, they are
not restored during resume.  This generally may lead to the state of
the system being slightly inconsistent after the resume, so it's
better to save and restore the configuration spaces of these devices
as well.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30 21:46:56 +02:00
Rafael J. Wysocki 46939f8b15 PCI PM: Put devices into low power states during late suspend (rev. 2)
Once we have allowed timer interrupts to be enabled during the late
phase of suspending devices, we are now able to use the generic
pci_set_power_state() to put PCI devices into low power states at
that time.  We can also use some related platform callbacks, like the
ones preparing devices for wake-up, during the late suspend.

Doing this will allow us to avoid the race condition where a device
using shared interrupts is put into a low power state with interrupts
enabled and then an interrupt (for another device) comes in and
confuses its driver.  At the same time, devices that don't support
the native PCI PM or that require some additional, platform-specific
operations to be carried out to put them into low power states will
be handled as appropriate.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30 21:46:55 +02:00
Rafael J. Wysocki 0128a89cf7 PCI PM: Move pci_restore_standard_config to pci-driver.c
Move pci_restore_standard_config() from pci.c to pci-driver.c and
make it static.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30 21:46:55 +02:00
Frans Pop 57ef80266e PCI PM: Consistently use variable name "error" for pm call return values
I noticed two functions use a variable "i" to store the return value of PM
function calls while the rest of the file uses "error". As "i" normally
indicates a counter of some sort it seems better to keep this consistent.

Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-03-30 21:46:55 +02:00
Alex Chiang 705b1aaa82 PCI: Introduce /sys/bus/pci/rescan
This interface allows the user to force a rescan of all PCI buses
in system, and rediscover devices that have been removed earlier.

pci_bus_attrs implementation from Trent Piepho.

Thanks to Vegard Nossum for discovering locking issues with the
sysfs interface.

Cc: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:57:58 -07:00
Chris Wright 0994375e96 PCI: add remove_id sysfs entry
This adds a remove_id sysfs entry to allow users of new_id to later
remove the added dynid.  One use case is management tools that want to
dynamically bind/unbind devices to pci-stub driver while devices are
assigned to KVM guests.  Rather than having to track which driver was
originally bound to the driver, a mangement tool can simply:

Guest uses device

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:11 -07:00
Rusty Russell a70f730282 cpumask: replace node_to_cpumask with cpumask_of_node.
Impact: cleanup

node_to_cpumask (and the blecherous node_to_cpumask_ptr which
contained a declaration) are replaced now everyone implements
cpumask_of_node.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13 14:49:46 +10:30
Rafael J. Wysocki 5294e25671 PCI PM: make the PM core more careful with drivers using the new PM framework
Currently, the PM core always attempts to manage devices with drivers
that use the new PM framework.  In particular, it attempts to disable
the devices (which is unnecessary), to save their state (which may be
undesirable if the driver has done that already) and to put them into
low power states (again, this may be undesirable if the driver has
already put the device into a low power state).  That need not be
the right thing to do, so make the core be more careful in this
respect.

Generally, there are the following categories of devices to consider:
* bridge devices without drivers
* non-bridge devices without drivers
* bridge devices with drivers
* non-bridge devices with drivers
and each of them should be handled differently.

For bridge devices without drivers the PCI PM core will save their
state on suspend and restore it (early) during resume, after putting
them into D0 if necessary.  It will not attempt to do anything else
to these devices.

For non-bridge devices without drivers the PCI PM core will disable
them and save their state on suspend.  During resume, it will put
them into D0, if necessary, restore their state (early) and reenable
them.

For bridge devices with drivers the PCI PM core will only save
their state on suspend if the driver hasn't done that already.
Still, the core will restore their state (early) during resume,
after putting them into D0, if necessary.

For non-bridge devices with drivers the PCI PM core will only save
their state on suspend if the driver hasn't done that already.  Also,
if the state of the device hasn't been saved by the driver, the core
will attempt to put the device into a low power state.  During
resume the core will restore the state of the device (early), after
putting it into D0, if necessary.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:22:35 -08:00
Rafael J. Wysocki cbbc2f6b0d PCI PM: Do not disable and enable bridges during suspend-resume
It is a mistake to disable and enable PCI bridges and PCI Express
ports during suspend-resume, at least at the time when it is
currently done.  Disabling them may lead to problems with accessing
devices behind them and they should be automatically enabled when
their standard config spaces are restored.  Fix this by not attempting
to disable bridges during suspend and enable them during resume.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:21:26 -08:00
Rafael J. Wysocki 99dadce875 PCI PM: Fix saving of device state in pci_legacy_suspend
Make pci_legacy_suspend() save the state of the device if it is
in PCI_UNKNOWN after its suspend callback has run and warn only if
the power state of the device has been changed by its suspend
callback.

Also, use WARN_ONCE(), which is more useful, in pci_legacy_suspend(),
so that the name of the offending function is printed.

Additionally, remove the unnecessary line of code setting
pci_dev->state_saved.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:21:08 -08:00
Rafael J. Wysocki ddb7c9d29f PCI PM: Fix handling of devices without drivers
Suspend to RAM is reported to break on some machines as a result of
attempting to put one of driverless PCI devices into a low power
state.  Avoid that by not attepmting to power manage driverless
devices during suspend.

Fix up pci_pm_poweroff() after a previous incomplete fix for the same
thing during hibernation.

This patch is reported to fix the regression from 2.6.28 tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=12605

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Eric Sesterhenn <snakebyte@gmx.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-02-04 17:20:09 -08:00
Rafael J. Wysocki 545ffd58ad PCI PM: Fix hibernation breakage on EeePC 701
Hibernation breaks on EeePC 701 as a result of attempting to put one
of its (driverless) devices into a low power state.  Avoid that by
not attepmting to power manage driverless devices during hibernation.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-and-tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 09:46:27 -08:00
Rafael J. Wysocki 418e4da33f PCI PM: Fix suspend error paths and testing facility breakage
If one of device drivers refuses to suspend by returning error code
from its ->suspend() callback, the devices that have already been
suspended are resumed by executing their drivers' ->resume()
callbacks.  Some of these callbacks expect the device's
configuration space to be restored if the device has been put into
D3 before they are called.  Unfortunately, this mechanism has been
broken by recent changes moving the restoration of config spaces
of some devices (most importantly, USB controllers and HDA Intel)
into the resume callbacks executed with interrupts off.  Obviously,
these callbacks are not invoked in the suspend error path and, as a
result, the system cannot be successfully brought back into the
working state in case of a suspend error.  The same thing happens
in the hibernation error path right before putting the system into
S4.

Similarly, the suspend testing facility associated with the
/sys/power/pm_test file is broken, because it uses the very same
mechanism that is used in the suspend and hibernation error paths.

Fix the breakage by making the PCI core restore the configuration
spaces of PCI devices that haven't been restored already before
pci_pm_resume() is called for those devices by the PM core.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-27 09:45:46 -08:00
Rafael J. Wysocki aa8c6c9374 PCI PM: Restore standard config registers of all devices early
There is a problem in our handling of suspend-resume of PCI devices that
many of them have their standard config registers restored with
interrupts enabled and they are put into the full power state with
interrupts enabled as well.  This may lead to the following scenario:
  * an interrupt vector is shared between two or more devices
  * one device is resumed earlier and generates an interrupt
  * the interrupt handler of another device tries to handle it and
    attempts to access the device the config space of which hasn't been
    restored yet and/or which still is in a low power state
  * the system crashes as a result

To prevent this from happening we should restore the standard
configuration registers of all devices with interrupts disabled and we
should put them into the D0 power state right after that.
Unfortunately, this cannot be done using the existing
pci_set_power_state(), because it can sleep.  Also, to do it we have to
make sure that the config spaces of all devices were actually saved
during suspend.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-16 12:57:58 -08:00
Rafael J. Wysocki f6dc1e5e3d PCI PM: Put PM callbacks in the order of execution
Put PM callbacks in drivers/pci/pci-driver.c in the order in which
they are executed which makes it much easier to follow the code.

No functional changes should result from this.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:19:43 -08:00
Rafael J. Wysocki d67e37d793 PCI PM: Run default PM callbacks for all devices using new framework
It should be quite clear that it generally makes sense to execute
the default PM callbacks (ie. the callbacks used for handling
suspend, hibernation and resume of PCI devices without drivers) for
all devices.  Of course, the drivers that provide legacy PCI PM
support (ie. the ->suspend, ->suspend_late, ->resume_early
or ->resume hooks in the pci_driver structure), carry out these
operations too, so we can't do it for devices with such drivers.
Still, we can make the default PM callbacks run for devices with
drivers using the new framework (ie. implement the pm object), since
there are no such drivers at the moment.

This also simplifies the code and makes it smaller.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:19:39 -08:00
Rafael J. Wysocki ad8cfa1def PCI PM: Call pci_fixup_device from legacy routines
The size of drivers/pci/pci-driver.c can be reduced quite a bit
if pci_fixup_device() is called from the legacy PM callbacks, so make
it happen.

No functional changes should result from this.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:17:23 -08:00
Rafael J. Wysocki bb80894543 PCI PM: Rearrange code in pci-driver.c
Rename two functions and rearrange code in drivers/pci/pci-driver.c
so that it's easier to follow.  In particular, separate invocations
of the legacy callbacks from the rest of the new callbacks' code.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:16:53 -08:00
Rafael J. Wysocki 734104292f PCI PM: Avoid touching devices behind bridges in unknown state
It generally is better to avoid accessing devices behind bridges that
may not be in the D0 power state, because in that case the bridges'
secondary buses may not be accessible.  For this reason, during the
early phase of resume (ie. with interrupts disabled), before
restoring the standard config registers of a device, check the power
state of the bridge the device is behind and postpone the restoration
of the device's config space, as well as any other operations that
would involve accessing the device, if that state is not D0.

In such cases the restoration of the device's config space will be
retried during the "normal" phase of resume (ie. with interrupts
enabled), so that the bridge can be put into D0 before that happens.

Also, save standard configuration registers of PCI devices during the
"normal" phase of suspend (ie. with interrupts enabled), so that the
bridges the devices are behind can be put into low power states (we
don't put bridges into low power states at the moment, but we may
want to do it in the future and it seems reasonable to design for
that).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:16:05 -08:00
Rafael J. Wysocki 07e836e8d1 PCI PM: Move pci_has_legacy_pm_support
Move pci_has_legacy_pm_support() closer to the functions that
call it.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:15:31 -08:00
Rafael J. Wysocki 571ff7584b PCI PM: Power-manage devices without drivers during suspend-resume
PCI devices without drivers can be put into low power states during
suspend with the help of pci_prepare_to_sleep() and prevented from
generating wake-up events during resume with the help of
pci_enable_wake().  However, it's better not to put bridges into
low power states during suspend, because that might result in entire
bus segments being powered off.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:15:18 -08:00
Rafael J. Wysocki fa58d305d9 PCI PM: Add suspend counterpart of pci_reenable_device
PCI devices without drivers are not disabled during suspend and
hibernation, but they are enabled during resume, with the help of
pci_reenable_device(), so there is an unbalanced execution of
pcibios_enable_device() in the resume code path.

To correct this introduce function pci_disable_enabled_device()
that will disable the argument device, if it is enabled when the
function is being run, without updating the device's pci_dev
structure and use it in the suspend code path to balance the
pci_reenable_device() executed during resume.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:14:40 -08:00
Rafael J. Wysocki c9b9972b3c PCI PM: Fix poweroff and restore callbacks
pci_fixup_device() is called too early in pci_pm_poweroff() and too
late in pci_pm_restore().  Moreover, pci_pm_restore_noirq() calls
pci_fixup_device() twice and in a wrong way.  Fix that.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:14:07 -08:00
Rusty Russell 873392ca51 PCI: work_on_cpu: use in drivers/pci/pci-driver.c
This uses work_on_cpu(), rather than altering the cpumask of the
thread which we happen to be.

Note the cleanups:

1) I've removed the CONFIG_NUMA test, since dev_to_node() returns -1
   for !CONFIG_NUMA anyway and the compiler will eliminate it.

2) No need to reset mempolicy to default (a bad idea anyway) since
   work_on_cpu is run from a workqueue.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:13:09 -08:00
Chris Wright 2debb4d201 PCI: allow pci driver to support only dynids
commit b41d6cf38e (PCI: Check dynids driver_data value for validity)
requires all drivers to include an id table to try and match
driver_data.  Before validating driver_data check driver has an id
table.

Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Milton Miller <miltonm@bga.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-01-07 11:12:37 -08:00
Rafael J. Wysocki 355a72d75b PCI: Rework default handling of suspend and resume
Rework the handling of suspend and resume of PCI devices which have
no drivers or the drivers of which do not provide any suspend-resume
callbacks in such a way that their standard PCI configuration
registers will be saved and restored with interrupts disabled.  This
should prevent such devices, including PCI bridges, from being
resumed too late to be able to function correctly during the resume
of the other PCI devices that may depend on them.

Also, to remove one possible source of future confusion, drop the
default handling of suspend and resume for PCI devices with drivers
providing the 'pm' object introduced by the new suspend-resume
framework (there are no such PCI drivers at the moment).

This patch addresses the regression from 2.6.26 tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=12121 .

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:32 -08:00
Rafael J. Wysocki adf094931f PM: Simplify the new suspend/hibernation framework for devices
PM: Simplify the new suspend/hibernation framework for devices

Following the discussion at the Kernel Summit, simplify the new
device PM framework by merging 'struct pm_ops' and
'struct pm_ext_ops' and removing pointers to 'struct pm_ext_ops'
from 'struct platform_driver' and 'struct pci_driver'.

After this change, the suspend/hibernation callbacks will only
reside in 'struct device_driver' as well as at the bus type/
device class/device type level.  Accordingly, PCI and platform
device drivers are now expected to put their suspend/hibernation
callbacks into the 'struct device_driver' embedded in
'struct pci_driver' or 'struct platform_driver', respectively.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@suse.cz>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-01-06 10:44:29 -08:00
Jean Delvare b41d6cf38e PCI: Check dynids driver_data value for validity
Only accept dynids whose driver_data value matches one of the driver's
pci_driver_id entries. This prevents the user from accidentally passing
values the drivers do not expect.

Cc: Milton Miller <miltonm@bga.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:48:35 -07:00
Milton Miller edbc25caaa PCI: remove dynids.use_driver_data
The driver flag dynids.use_driver_data is almost consistently not set,
and causes more problems than it solves.  It was initially intended as a
flag to indicate whether a driver's usage of driver_data had been
carefully inspected and was ready for values from userspace.  That audit
was never done, so most drivers just get a 0 for driver_data when new
IDs are added from userspace via sysfs.  So remove the flag, allowing
drivers to see the data directly (a followon patch validates the passed
driver_data value against what the drivers expect).

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20 10:48:34 -07:00
Linus Torvalds dc7c65db28 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (72 commits)
  Revert "x86/PCI: ACPI based PCI gap calculation"
  PCI: remove unnecessary volatile in PCIe hotplug struct controller
  x86/PCI: ACPI based PCI gap calculation
  PCI: include linux/pm_wakeup.h for device_set_wakeup_capable
  PCI PM: Fix pci_prepare_to_sleep
  x86/PCI: Fix PCI config space for domains > 0
  Fix acpi_pm_device_sleep_wake() by providing a stub for CONFIG_PM_SLEEP=n
  PCI: Simplify PCI device PM code
  PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleep
  PCI ACPI: Rework PCI handling of wake-up
  ACPI: Introduce new device wakeup flag 'prepared'
  ACPI: Introduce acpi_device_sleep_wake function
  PCI: rework pci_set_power_state function to call platform first
  PCI: Introduce platform_pci_power_manageable function
  ACPI: Introduce acpi_bus_power_manageable function
  PCI: make pci_name use dev_name
  PCI: handle pci_name() being const
  PCI: add stub for pci_set_consistent_dma_mask()
  PCI: remove unused arch pcibios_update_resource() functions
  PCI: fix pci_setup_device()'s sprinting into a const buffer
  ...

Fixed up conflicts in various files (arch/x86/kernel/setup_64.c,
arch/x86/pci/irq.c, arch/x86/pci/pci.h, drivers/acpi/sleep/main.c,
drivers/pci/pci.c, drivers/pci/pci.h, include/acpi/acpi_bus.h) from x86
and ACPI updates manually.
2008-07-16 17:25:46 -07:00
Rafael J. Wysocki bbb44d9f23 PCI: implement new suspend/resume callbacks
Implement new suspend and hibernation callbacks for the PCI bus type.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10 10:59:51 -07:00
Rafael J. Wysocki e1a2a51e68 Suspend/Resume bug in PCI layer wrt quirks
Some quirks should be called with interrupt disabled, we can't directly
call them in .resume_early. Also the patch introduces
pci_fixup_resume_early and pci_fixup_suspend, which matches current
device core callbacks (.suspend/.resume_early).

TBD: Somebody knows why we need quirk resume should double check if a
quirk should be called in resume or resume_early. I changed some per my
understanding, but can't make sure I fixed all.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10 10:59:46 -07:00
Yinghai Lu 4efeb4dd3c PCI: use dev_to_node in pci_call_probe
to make sure get one online node.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-24 12:09:46 +02:00
Yinghai Lu d52877c7b1 pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2
[PATCH 2/2] pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2

this change

| commit 23a274c8a5
| Author: Prakash, Sathya <sathya.prakash@lsi.com>
| Date:   Fri Mar 7 15:53:21 2008 +0530
|
|     [SCSI] mpt fusion: Enable MSI by default for SAS controllers
|
|     This patch modifies the driver to enable MSI by default for all SAS chips.
|
|     Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com>
|     Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
|
Causes the kexec of a RHEL 5.1 kernel to fail.

root casue: the rhel 5.1 kernel still uses INTx emulation.  and
mptscsih_shutdown doesn't call pci_disable_msi to reenable INTx on kexec path

So call pci_msi_shutdown in the shutdown path to do the same thing to msix

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
2008-04-29 09:12:51 -07:00
Mike Travis f70316dace generic: use new set_cpus_allowed_ptr function
* Use new set_cpus_allowed_ptr() function added by previous patch,
    which instead of passing the "newly allowed cpus" cpumask_t arg
    by value,  pass it by pointer:

    -int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
    +int set_cpus_allowed_ptr(struct task_struct *p, const cpumask_t *new_mask)

  * Modify CPU_MASK_ALL

Depends on:
	[sched-devel]: sched: add new set_cpus_allowed_ptr function

Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-19 19:44:58 +02:00
Lee Schermerhorn 74e27e44b0 PCI: Mem Policy: fix mempolicy usage in pci driver
In an attempt to ensure memory allocation from the local node, the pci
driver temporarily replaces the current task's memory policy with the
system default policy.  Trying to be a good citizen, the driver then call's
mpol_get() on the new policy.  When it's finished probing, it undoes the
'_get by calling mpol_free() [on the system default policy] and then
restores the current task's saved mempolicy.

A couple of issues here:

1) it's never necessary to set a task's mempolicy to the
   system default policy in order to get system default
   allocation behavior.  Simply set the current task's
   mempolicy to NULL and allocations will fall back to
   system default policy.

2) we should never [need to] call mpol_free() on the system
   default policy.  [I plan on trapping this with a VM_BUG_ON()
   in a subsequent patch.]

This patch removes the calls to mpol_get() and mpol_free()
and uses NULL for the temporary task mempolicy to effect
default allocation behavior.

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01 15:04:20 -08:00
Greg Kroah-Hartman 2b93730318 PCI: remove foolish code from pci-driver.c
The PCI bus should not be trying to declare its own attribute type.
Especially as this code could never ever be called because the driver
core overwrites the driver kobject type to be its own internal type.
Delete all of this code as it was never being used and is not correct.

Also update my copyright on the file while I'm touching things there.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:34 -08:00
Greg Kroah-Hartman 03d43b19b9 PCI: use proper call to driver_create_file
Don't try to call the "raw" sysfs_create_file when we already have a
helper function to do this kind of work for us.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24 20:40:33 -08:00
Adrian Bunk d73460d79b PCI: make pci_match_device() static
pci_match_device() no longer has any other users.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-05 13:35:17 -08:00