After commit 1757659d02 ("ACPI: OSL: Implement deferred unmapping
of ACPI memory") in some cases acpi_release_memory() may return
before the target memory mappings actually go away, because they
are released asynchronously now.
Prevent it from returning prematurely by making it wait for the next
RCU grace period to elapse, for all of the RCU callbacks to complete
and for all of the scheduled work items to be flushed before
returning.
Fixes: 1757659d02 ("ACPI: OSL: Implement deferred unmapping of ACPI memory")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The arm64 implementation of acpi_os_ioremap() was recently updated to
tighten the checks around which parts of memory are permitted to be
mapped by ACPI code, which generally only needs access to memory regions
that are statically described by firmware, and any attempts to access
memory that is in active use by the OS is generally a bug or a hacking
attempt. This tightening is based on the EFI memory map, which describes
all memory in the system.
The AArch64 architecture permits page sizes of 16k and 64k in addition
to the EFI default, which is 4k, which means that the EFI memory map may
describe regions that cannot be mapped seamlessly if the OS page size is
greater than 4k. This is usually not a problem, given that the EFI spec
does not permit memory regions requiring different memory attributes to
share a 64k page frame, and so the usual rounding to page size performed
by ioremap() is sufficient to deal with this. However, this rounding does
complicate our EFI memory map permission check, due to the loss of
information that occurs when several small regions share a single 64k
page frame (where rounding each of them will result in the same 64k
single page region).
However, due to the fact that the region check occurs *before* the call
to ioremap() where the necessary rounding is performed, we can deal
with this issue simply by removing the redundant rounding performed by
acpi_os_map_iomem(), as it appears to be the only place where the
arguments to a call to acpi_os_ioremap() are rounded up. So omit the
rounding in the call, and instead, apply the necessary masking when
assigning the map->virt member.
Fixes: 1583052d11 ("arm64/acpi: disallow AML memory opregions to access kernel memory")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
`fch_misc_setup()` uses `acpi_dev_get_property()` to read the value of
"is-rv" passed in by BIOS in ACPI tables. However, not all BIOSes
might pass in this property and hence it is important to first check
the return value of `acpi_dev_get_property()` before referencing the
object filled by it.
Signed-off-by: Furquan Shaikh <furquan@google.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk
driver and the Designware i2c driver (changes from Akshu Agrawal and
Pu Wen).
-----BEGIN PGP SIGNATURE-----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=D9q+
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk
driver and the Designware i2c driver (changes from Akshu Agrawal and
Pu Wen)"
* tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
clk: x86: Support RV architecture
ACPI: APD: Add a fmw property is_raven
clk: x86: Change name from ST to FCH
ACPI: APD: Change name from ST to FCH
i2c: designware: Add device HID for Hygon I2C controller
- Add 'Runtime Firmware Activation' support for NVDIMMs that advertise
the relevant capability
- Misc libnvdimm and DAX cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQT9vPEBxh63bwxRYEEPzq5USduLdgUCXzHodgAKCRAPzq5USduL
djTjAQD1THDmizHn16zd94ueygh/BXfN0zyeVvQH352ol7kdfQEAj2A7YJ9XBbBY
JC6/CNd+OiB9W88lLOUf3Waj1a7cUQ8=
=Q6qn
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updayes from Vishal Verma:
"You'd normally receive this pull request from Dan Williams, but he's
busy watching a newborn (Congrats Dan!), so I'm watching libnvdimm
this cycle.
This adds a new feature in libnvdimm - 'Runtime Firmware Activation',
and a few small cleanups and fixes in libnvdimm and DAX. I'd
originally intended to make separate topic-based pull requests - one
for libnvdimm, and one for DAX, but some of the DAX material fell out
since it wasn't quite ready.
Summary:
- add 'Runtime Firmware Activation' support for NVDIMMs that
advertise the relevant capability
- misc libnvdimm and DAX cleanups"
* tag 'libnvdimm-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/security: ensure sysfs poll thread woke up and fetch updated attr
libnvdimm/security: the 'security' attr never show 'overwrite' state
libnvdimm/security: fix a typo
ACPI: NFIT: Fix ARS zero-sized allocation
dax: Fix incorrect argument passed to xas_set_err()
ACPI: NFIT: Add runtime firmware activate support
PM, libnvdimm: Add runtime firmware activation support
libnvdimm: Convert to DEVICE_ATTR_ADMIN_RO()
drivers/dax: Expand lock scope to cover the use of addresses
fs/dax: Remove unused size parameter
dax: print error message by pr_info() in __generic_fsdax_supported()
driver-core: Introduce DEVICE_ATTR_ADMIN_{RO,RW}
tools/testing/nvdimm: Emulate firmware activation commands
tools/testing/nvdimm: Prepare nfit_ctl_test() for ND_CMD_CALL emulation
tools/testing/nvdimm: Add command debug messages
tools/testing/nvdimm: Cleanup dimm index passing
ACPI: NFIT: Define runtime firmware activation commands
ACPI: NFIT: Move bus_dsm_mask out of generic nvdimm_bus_descriptor
libnvdimm: Validate command family indices
Since there is slight difference in AMD RV based soc in misc
clk architecture. The fmw property will help in differentiating
the SoCs.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
AMD SoC general pupose clk is present in new platforms with
same MMIO mappings. We can reuse the same clk handler support
for other platforms. Hence, changing name from ST(SoC) to FCH(IP)
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add device HID HYGO0010 to match the Hygon ACPI Vendor ID (HYGO) that
was registered in http://www.uefi.org/acpi_id_list, and the I2C
controller on Hygon paltform will use the HID.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
drivers cleanup (Andrzej Pietrasiewicz)
- Add generic netlink support for userspace notifications: events, temperature
and discovery commands (Daniel Lezcano)
- Fix redundant initialization for a ret variable (Colin Ian King)
- Remove the clock cooling code as it is used nowhere (Amit Kucheria)
- Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu)
- Replace all references to thermal.txt in the documentation to the
corresponding yaml files (Amit Kucheria)
- Add maintainer entry for the IPA (Lukasz Luba)
- Add support for MSM8939 for the tsens (Shawn Guo)
- Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba)
- Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)
- Add tsensor support for V2 mediatek thermal system (Henry Yen)
- Fix thermal zone lookup by ID for the core code (Thierry Reding)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAl8q7tsACgkQqDIjiipP
6E+5Rwf7BFEn5YXPvng8cmnAlgvEBc9DdT6mGSo0NpFm9MdUxXlaqvw3WWSGyqWQ
+z0Ka7lmn5XyiMsVN11++Snp+79X17HzZf9SXO3glyIpAn+5prTDRhzzj0/jPrtS
sEeI++DrILsKKMGVljzftLmwNJN9DkUDNcnmWmZdCDbYVEKtP9Pjf2wBjAnXj7sX
JA3CkHRMwYLEQbfaKz37M11cYM+LqbDOlb6U11YWgAGGJ7d7zNYRf2/YSYPM4AN6
iE6j0E+3jIlXesULsap1AzeJaBq+wFxj1FL2TUZ8KscvRrm3AucqzNAT2M/Bc5Az
XLKKzc6Gp9JfqB5KXhX2EDu7VRnDBg==
=cSMN
-----END PGP SIGNATURE-----
Merge tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal updates from Daniel Lezcano:
- Add support to enable/disable the thermal zones resulting on core
code and drivers cleanup (Andrzej Pietrasiewicz)
- Add generic netlink support for userspace notifications: events,
temperature and discovery commands (Daniel Lezcano)
- Fix redundant initialization for a ret variable (Colin Ian King)
- Remove the clock cooling code as it is used nowhere (Amit Kucheria)
- Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian
Rotariu)
- Replace all references to thermal.txt in the documentation to the
corresponding yaml files (Amit Kucheria)
- Add maintainer entry for the IPA (Lukasz Luba)
- Add support for MSM8939 for the tsens (Shawn Guo)
- Update power allocator and devfreq cooling to SPDX licensing (Lukasz
Luba)
- Add Cannon Lake Low Power PCH support (Sumeet Pawnikar)
- Add tsensor support for V2 mediatek thermal system (Henry Yen)
- Fix thermal zone lookup by ID for the core code (Thierry Reding)
* tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits)
thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support
thermal: mediatek: Add tsensor support for V2 thermal system
thermal: mediatek: Prepare to add support for other platforms
thermal: Update power allocator and devfreq cooling to SPDX licensing
MAINTAINERS: update entry to thermal governors file name prefixing
thermal: core: Add thermal zone enable/disable notification
thermal: qcom: tsens-v0_1: Add support for MSM8939
dt-bindings: tsens: qcom: Document MSM8939 compatible
thermal: core: Fix thermal zone lookup by ID
thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id
thermal: imx8mm: Support module autoloading
thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()
MAINTAINERS: Add maintenance information for IPA
thermal: rcar_gen3_thermal: Do not shadow thcode variable
dt-bindings: thermal: Get rid of thermal.txt and replace references
thermal: core: Move initialization after core initcall
thermal: netlink: Improve the initcall ordering
net: genetlink: Move initialization to core_initcall
thermal: rcar_gen3_thermal: Add r8a774e1 support
thermal/drivers/clock_cooling: Remove clock_cooling code
...
static priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low' priority level,
plus sched_set_normal() to set the policy back to non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in a separate
tree.
When merging to the latest upstream tree there's a conflict in drivers/spi/spi.c,
which can be resolved via:
sched_set_fifo(ctlr->kworker_task);
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/7JH
-----END PGP SIGNATURE-----
Merge tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull sched/fifo updates from Ingo Molnar:
"This adds the sched_set_fifo*() encapsulation APIs to remove static
priority level knowledge from non-scheduler code.
The three APIs for non-scheduler code to set SCHED_FIFO are:
- sched_set_fifo()
- sched_set_fifo_low()
- sched_set_normal()
These are two FIFO priority levels: default (high), and a 'low'
priority level, plus sched_set_normal() to set the policy back to
non-SCHED_FIFO.
Since the changes affect a lot of non-scheduler code, we kept this in
a separate tree"
* tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
sched,tracing: Convert to sched_set_fifo()
sched: Remove sched_set_*() return value
sched: Remove sched_setscheduler*() EXPORTs
sched,psi: Convert to sched_set_fifo_low()
sched,rcutorture: Convert to sched_set_fifo_low()
sched,rcuperf: Convert to sched_set_fifo_low()
sched,locktorture: Convert to sched_set_fifo()
sched,irq: Convert to sched_set_fifo()
sched,watchdog: Convert to sched_set_fifo()
sched,serial: Convert to sched_set_fifo()
sched,powerclamp: Convert to sched_set_fifo()
sched,ion: Convert to sched_set_normal()
sched,powercap: Convert to sched_set_fifo*()
sched,spi: Convert to sched_set_fifo*()
sched,mmc: Convert to sched_set_fifo*()
sched,ivtv: Convert to sched_set_fifo*()
sched,drm/scheduler: Convert to sched_set_fifo*()
sched,msm: Convert to sched_set_fifo*()
sched,psci: Convert to sched_set_fifo*()
sched,drbd: Convert to sched_set_fifo*()
...
-----BEGIN PGP SIGNATURE-----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=oADH
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe:
- ZNS support (Aravind, Keith, Matias, Niklas)
- Misc cleanups, optimizations, fixes (Baolin, Chaitanya, David,
Dongli, Max, Sagi)
- null_blk zone capacity support (Aravind)
- MD:
- raid5/6 fixes (ChangSyun)
- Warning fixes (Damien)
- raid5 stripe fixes (Guoqing, Song, Yufen)
- sysfs deadlock fix (Junxiao)
- raid10 deadlock fix (Vitaly)
- struct_size conversions (Gustavo)
- Set of bcache updates/fixes (Coly)
* tag 'for-5.9/drivers-20200803' of git://git.kernel.dk/linux-block: (117 commits)
md/raid5: Allow degraded raid6 to do rmw
md/raid5: Fix Force reconstruct-write io stuck in degraded raid5
raid5: don't duplicate code for different paths in handle_stripe
raid5-cache: hold spinlock instead of mutex in r5c_journal_mode_show
md: print errno in super_written
md/raid5: remove the redundant setting of STRIPE_HANDLE
md: register new md sysfs file 'uuid' read-only
md: fix max sectors calculation for super 1.0
nvme-loop: remove extra variable in create ctrl
nvme-loop: set ctrl state connecting after init
nvme-multipath: do not fall back to __nvme_find_path() for non-optimized paths
nvme-multipath: fix logic for non-optimized paths
nvme-rdma: fix controller reset hang during traffic
nvme-tcp: fix controller reset hang during traffic
nvmet: introduce the passthru Kconfig option
nvmet: introduce the passthru configfs interface
nvmet: Add passthru enable/disable helpers
nvmet: add passthru code to process commands
nvme: export nvme_find_get_ns() and nvme_put_ns()
nvme: introduce nvme_ctrl_get_by_path()
...
- Eliminate significant AML processing overhead related to using
operation regions in system memory by reworking the management
of memory mappings in the ACPI code to defer unmap operations
(to do them outside of the ACPICA locks, among other things) and
making the memory operation reagion handler avoid releasing memory
mappings created by it too early (Rafael Wysocki).
- Update the ACPICA code in the kernel to upstream revision
20200717:
* Prevent operation region reference counts from overflowing in
some cases (Erik Kaneda).
* Replace one-element array with flexible-array (Gustavo A. R.
Silva).
- Fix ACPI PCI hotplug reference counting (Rafael Wysocki).
- Drop last bits of the ACPI procfs interface (Thomas Renninger).
- Drop some redundant checks from the code parsing ACPI tables
related to NUMA (Hanjun Guo).
- Avoid redundant object evaluation in the ACPI device properties
handling code (Heikki Krogerus).
- Avoid unecessary memory overhead related to storing the signatures
of the ACPI tables recognized by the kernel (Ard Biesheuvel).
- Add missing newline characters when printing module parameter
values in some places (Xiongfeng Wang).
- Update the link to the ACPI specifications in some places (Tiezhu
Yang).
- Use the fallthrough pseudo-keyword in the ACPI code (Gustavo A. R.
Silva).
- Drop redundant variable initialization from the APEI code (Colin
Ian King).
- Drop uninitialized_var() from the ACPI PAD driver (Jason Yan).
- Replace HTTP links with HTTPS ones in the ACPI code (Alexander A.
Klimov).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl8oO8gSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRx2nUP/iSRAW0DK4PYDNLDV1Q+y5RrQw44iMDf
yfLQu3agardM1KGtPuYw5zmU0UoEYtW8s2r027bxw9Hvn0IzBh5TiDvcVjMEnbVC
+6m/fWg3EStfZ9w2dxDzXDMIk/oiEZsjtWSRaDTfAIH2jc/xVcSXDojlMgBPQDu5
hIITjMbGGx783o4PNCYbIZy1ReJgd8MNQ+Xp3MCpTgbFgHMHKBOJ6B/nS8aTfilO
eE5JvzhXED7qITaXYWxI9OZpRTPTNQ3eaEPbWvnw4KJ5boMfyREMGdTBipXO+kSA
SwKhFysYEUAZM7Ffq0eTnWSCU7VWogAsTauIgs4+d9z8VrGhWi5+b6N/E/uwTKtj
HF98xtk+Loe8V24LwN0snvv51O7P5nAH47QxwIBvQssfR8ZSgdwHtUQcckybAJhx
LLmPtJrM8ZAefc9H4o0eVqumjoh1amGKC9dTY0g1j0UIE0y3ZIFHTvDNvhpTzgBk
5uUHHEiolGNWHVrs1LIMOEejqx62m+EjVc9b8XUdJqHoboTccMM73DRk/00meP/7
br/VfMI0aTjPLssvSC/ZSlTZt+ddrBm+cXw9eqruDQwdQaqxpJu+D3odjdaYSjpg
luiYQrQdoDmIDh4UNuJbvG/Hub3CLzvJSqGWLExNbX7nWXxH4HIx/8PcNtVkKZRV
qBXotIc+i4VD
=Nn2Q
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These eliminate significant AML processing overhead related to using
operation regions in system memory, update the ACPICA code in the
kernel to upstream revision 20200717 (including a fix to prevent
operation region reference counts from overflowing in some cases),
remove the last bits of the (long deprecated) ACPI procfs interface
and do some assorted cleanups.
Specifics:
- Eliminate significant AML processing overhead related to using
operation regions in system memory by reworking the management of
memory mappings in the ACPI code to defer unmap operations (to do
them outside of the ACPICA locks, among other things) and making
the memory operation reagion handler avoid releasing memory
mappings created by it too early (Rafael Wysocki).
- Update the ACPICA code in the kernel to upstream revision 20200717:
* Prevent operation region reference counts from overflowing in
some cases (Erik Kaneda).
* Replace one-element array with flexible-array (Gustavo A. R.
Silva).
- Fix ACPI PCI hotplug reference counting (Rafael Wysocki).
- Drop last bits of the ACPI procfs interface (Thomas Renninger).
- Drop some redundant checks from the code parsing ACPI tables
related to NUMA (Hanjun Guo).
- Avoid redundant object evaluation in the ACPI device properties
handling code (Heikki Krogerus).
- Avoid unecessary memory overhead related to storing the signatures
of the ACPI tables recognized by the kernel (Ard Biesheuvel).
- Add missing newline characters when printing module parameter
values in some places (Xiongfeng Wang).
- Update the link to the ACPI specifications in some places (Tiezhu
Yang).
- Use the fallthrough pseudo-keyword in the ACPI code (Gustavo A. R.
Silva).
- Drop redundant variable initialization from the APEI code (Colin
Ian King).
- Drop uninitialized_var() from the ACPI PAD driver (Jason Yan).
- Replace HTTP links with HTTPS ones in the ACPI code (Alexander A.
Klimov)"
* tag 'acpi-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits)
ACPI: APEI: remove redundant assignment to variable rc
ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' check
ACPI: NUMA: Remove the useless sub table pointer check
ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array()
ACPICA: Update version to 20200717
ACPICA: Do not increment operation_region reference counts for field units
ACPICA: Replace one-element array with flexible-array
ACPI: Replace HTTP links with HTTPS ones
ACPI: Use valid link to the ACPI specification
ACPI: OSL: Clean up the removal of unused memory mappings
ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem()
ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address()
ACPICA: Preserve memory opregion mappings
ACPI: OSL: Implement deferred unmapping of ACPI memory
ACPI: Use fallthrough pseudo-keyword
PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()
ACPI: tables: avoid relocations for table signature array
ACPI: PAD: Eliminate usage of uninitialized_var() macro
ACPI: sysfs: add newlines when printing module parameters
ACPI: EC: add newline when printing 'ec_event_clearing' module parameter
...
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver
and eliminate a redundant static variable from it (Chen Yu,
Rafael Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the
Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to
be specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq
driver (Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal
Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the
MMC jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz
Luba, Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance names
consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander
A. Klimov).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl8oO24SHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRx7ZQP/0lQ0yABnASnwomdOH6+K/m7rvc+e9FE
zx5pTDQswhU5tM7SQAIKqe0uSI+okF2UrBrT5onA16F+JUbnrbexJLazBPfVTTGF
AKpKEQ7Wh69Wz+Y6cQZjm1dTuRL+dlBJuBrzR2tLSnONPMMHuFcO3xd7lgE9UAxC
oGEf393taA6OqcUNRQIa2gqbq+k1qhKjeDucGkbOaoJ6CL0ZyWI+Tfw1WWaBBGv0
/2wBd6V513OH8WtQCW6H3YpHmhYW6OwL8w19KyGcjPRGJaeaIP4W/Ng7mkvgL5ZB
vZqg3XiufFV9uTe8W1NQaVv/NjlN256OteuK809aosTVjD0dhFkhBYg5TLu6HbQq
C/NciZ+78oLedWLT73EUfw3NyS+V0jk6X2EIlBUwNi0Qw1B1pCifGOCKzWFFe5cr
ci4xr4FG7dBkxScOxwFAU2s5TdPHLOkGkQtg4jZr0OYDrzkyLEdsnZEUjLPORo+0
6EBXGfTOSy2CBHcYswRtzJr/1pUTzj7oejhTAMCCuYW2r3VyQtnYcVjlehtp20if
6BfmGisk8nmtxlSm+/Y2FqKa4bNnSTMmr0UJQ+Rjp0tHs47QeucI0ORfZ5nPaBac
+ptvIjWmn3xejT/+oAehpH9066Iuy66vzHdnj7x5+WAsmYS8n8OFtlBFkYELmLJB
3xI5hIl7WtGo
=8cUO
-----END PGP SIGNATURE-----
Merge tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The most significant change here is the extension of the Energy Model
to cover non-CPU devices (as well as CPUs) from Lukasz Luba.
There is also some new hardware support (Ice Lake server idle states
table for intel_idle, Sapphire Rapids and Power Limit 4 support in the
RAPL driver), some new functionality in the existing drivers (eg. a
new switch to disable/enable CPU energy-efficiency optimizations in
intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq
core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci,
devfreq), including the elimination of W=1 build warnings from cpufreq
done by Lee Jones.
Specifics:
- Make the Energy Model cover non-CPU devices (Lukasz Luba).
- Add Ice Lake server idle states table to the intel_idle driver and
eliminate a redundant static variable from it (Chen Yu, Rafael
Wysocki).
- Eliminate all W=1 build warnings from cpufreq (Lee Jones).
- Add support for Sapphire Rapids and for Power Limit 4 to the Intel
RAPL power capping driver (Sumeet Pawnikar, Zhang Rui).
- Fix function name in kerneldoc comments in the idle_inject power
capping driver (Yangtao Li).
- Fix locking issues with cpufreq governors and drop a redundant
"weak" function definition from cpufreq (Viresh Kumar).
- Rearrange cpufreq to register non-modular governors at the
core_initcall level and allow the default cpufreq governor to be
specified in the kernel command line (Quentin Perret).
- Extend, fix and clean up the intel_pstate driver (Srinivas
Pandruvada, Rafael Wysocki):
* Add a new sysfs attribute for disabling/enabling CPU
energy-efficiency optimizations in the processor.
* Make the driver avoid enabling HWP if EPP is not supported.
* Allow the driver to handle numeric EPP values in the sysfs
interface and fix the setting of EPP via sysfs in the active
mode.
* Eliminate a static checker warning and clean up a kerneldoc
comment.
- Clean up some variable declarations in the powernv cpufreq driver
(Wei Yongjun).
- Fix up the ->enter_s2idle callback definition to cover the case
when it points to the same function as ->idle correctly (Neal Liu).
- Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson).
- Make the PM core emit "changed" uevent when adding/removing the
"wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi).
- Add a helper macro for declaring PM callbacks and use it in the MMC
jz4740 driver (Paul Cercueil).
- Fix white space in some places in the hibernate code and make the
system-wide PM code use "const char *" where appropriate (Xiang
Chen, Alexey Dobriyan).
- Add one more "unsafe" helper macro to the freezer to cover the NFS
use case (He Zhe).
- Change the language in the generic PM domains framework to use
parent/child terminology and clean up a typo and some comment
fromatting in that code (Kees Cook, Geert Uytterhoeven).
- Update the operating performance points OPP framework (Lukasz Luba,
Andrew-sh.Cheng, Valdis Kletnieks):
* Refactor dev_pm_opp_of_register_em() and update related drivers.
* Add a missing function export.
* Allow disabled OPPs in dev_pm_opp_get_freq().
- Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric
Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier):
* Add support for delayed timers to the devfreq core and make the
Samsung exynos5422-dmc driver use it.
* Unify sysfs interface to use "df-" as a prefix in instance
names consistently.
* Fix devfreq_summary debugfs node indentation.
* Add the rockchip,pmu phandle to the rk3399_dmc driver DT
bindings.
* List Dmitry Osipenko as the Tegra devfreq driver maintainer.
* Fix typos in the core devfreq code.
- Update the pm-graph utility to version 5.7 including a number of
fixes related to suspend-to-idle (Todd Brandt).
- Fix coccicheck errors and warnings in the cpupower utility (Shuah
Khan).
- Replace HTTP links with HTTPs ones in multiple places (Alexander A.
Klimov)"
* tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits)
cpuidle: ACPI: fix 'return' with no value build warning
cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode
cpufreq: intel_pstate: Rearrange the storing of new EPP values
intel_idle: Customize IceLake server support
PM / devfreq: Fix the wrong end with semicolon
PM / devfreq: Fix indentaion of devfreq_summary debugfs node
PM / devfreq: Clean up the devfreq instance name in sysfs attr
memory: samsung: exynos5422-dmc: Add module param to control IRQ mode
memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold
memory: samsung: exynos5422-dmc: Use delayed timer as default
PM / devfreq: Add support delayed timer for polling mode
dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle
PM / devfreq: tegra: Add Dmitry as a maintainer
PM / devfreq: event: Fix trivial spelling
PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
...
- Removal of the tremendously unpopular read_barrier_depends() barrier,
which is a NOP on all architectures apart from Alpha, in favour of
allowing architectures to override READ_ONCE() and do whatever dance
they need to do to ensure address dependencies provide LOAD ->
LOAD/STORE ordering. This work also offers a potential solution if
compilers are shown to convert LOAD -> LOAD address dependencies into
control dependencies (e.g. under LTO), as weakly ordered architectures
will effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic, augment
the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the device
ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions and
kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words.
-----BEGIN PGP SIGNATURE-----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=mh79
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 and cross-arch updates from Catalin Marinas:
"Here's a slightly wider-spread set of updates for 5.9.
Going outside the usual arch/arm64/ area is the removal of
read_barrier_depends() series from Will and the MSI/IOMMU ID
translation series from Lorenzo.
The notable arm64 updates include ARMv8.4 TLBI range operations and
translation level hint, time namespace support, and perf.
Summary:
- Removal of the tremendously unpopular read_barrier_depends()
barrier, which is a NOP on all architectures apart from Alpha, in
favour of allowing architectures to override READ_ONCE() and do
whatever dance they need to do to ensure address dependencies
provide LOAD -> LOAD/STORE ordering.
This work also offers a potential solution if compilers are shown
to convert LOAD -> LOAD address dependencies into control
dependencies (e.g. under LTO), as weakly ordered architectures will
effectively be able to upgrade READ_ONCE() to smp_load_acquire().
The latter case is not used yet, but will be discussed further at
LPC.
- Make the MSI/IOMMU input/output ID translation PCI agnostic,
augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
bus-specific parameter and apply the resulting changes to the
device ID space provided by the Freescale FSL bus.
- arm64 support for TLBI range operations and translation table level
hints (part of the ARMv8.4 architecture version).
- Time namespace support for arm64.
- Export the virtual and physical address sizes in vmcoreinfo for
makedumpfile and crash utilities.
- CPU feature handling cleanups and checks for programmer errors
(overlapping bit-fields).
- ACPI updates for arm64: disallow AML accesses to EFI code regions
and kernel memory.
- perf updates for arm64.
- Miscellaneous fixes and cleanups, most notably PLT counting
optimisation for module loading, recordmcount fix to ignore
relocations other than R_AARCH64_CALL26, CMA areas reserved for
gigantic pages on 16K and 64K configurations.
- Trivial typos, duplicate words"
Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
arm64/mm: save memory access in check_and_switch_context() fast switch path
arm64: sigcontext.h: delete duplicated word
arm64: ptrace.h: delete duplicated word
arm64: pgtable-hwdef.h: delete duplicated words
bus: fsl-mc: Add ACPI support for fsl-mc
bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
of/irq: Make of_msi_map_rid() PCI bus agnostic
of/irq: make of_msi_map_get_device_domain() bus agnostic
dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
of/device: Add input id to of_dma_configure()
of/iommu: Make of_map_rid() PCI agnostic
ACPI/IORT: Add an input ID to acpi_dma_configure()
ACPI/IORT: Remove useless PCI bus walk
ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
arm64: enable time namespace support
arm64/vdso: Restrict splitting VVAR VMA
arm64/vdso: Handle faults on timens page
...
Pending commit in -next "devres: handle zero size in devm_kmalloc()"
triggers a boot regression due to the ARS implementation expecting NULL
from a zero-sized allocation. Avoid the zero-sized allocation by
skipping ARS, otherwise crashes with the following signature when
de-referencing ZERO_SIZE_PTR.
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:__acpi_nfit_scrub+0x28a/0x350 [nfit]
[..]
Call Trace:
? acpi_nfit_query_poison+0x6a/0x180 [nfit]
acpi_nfit_scrub+0x36/0xb0 [nfit]
process_one_work+0x23c/0x580
worker_thread+0x50/0x3b0
Otherwise the implementation correctly aborts when NULL is returned from
devm_kzalloc() in ars_status_alloc().
Link: https://lore.kernel.org/r/159624590643.3037264.14157533719042907758.stgit@dwillia2-desk3.amr.corp.intel.com
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
* pm-cpuidle:
cpuidle: ACPI: fix 'return' with no value build warning
intel_idle: Customize IceLake server support
cpuidle: change enter_s2idle() prototype
cpuidle: psci: Prevent domain idlestates until consumers are ready
cpuidle: psci: Convert PM domain to platform driver
cpuidle: psci: Fix error path via converting to a platform driver
cpuidle: psci: Fail cpuidle registration if set OSI mode failed
cpuidle: psci: Split into two separate build objects
intel_idle: Eliminate redundant static variable
Add return value to fix return-type build warning introduced by
commit efe9711214 ("cpuidle: change enter_s2idle() prototype").
Fixes: efe9711214 ("cpuidle: change enter_s2idle() prototype")
Signed-off-by: Neal Liu <neal.liu@mediatek.com>
[ rjw: Subject & changelog edits, make acpi_idle_enter_s2idle()
return 0 in all cases ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Control Flow Integrity(CFI) is a security mechanism that disallows
changes to the original control flow graph of a compiled binary,
making it significantly harder to perform such attacks.
init_state_node() assign same function callback to different
function pointer declarations.
static int init_state_node(struct cpuidle_state *idle_state,
const struct of_device_id *matches,
struct device_node *state_node) { ...
idle_state->enter = match_id->data; ...
idle_state->enter_s2idle = match_id->data; }
Function declarations:
struct cpuidle_state { ...
int (*enter) (struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index);
void (*enter_s2idle) (struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index); };
In this case, either enter() or enter_s2idle() would cause CFI check
failed since they use same callee.
Align function prototype of enter() since it needs return value for
some use cases. The return value of enter_s2idle() is no
need currently.
Signed-off-by: Neal Liu <neal.liu@mediatek.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch implements a solution for a BIOS hack used on some currently
shipping Intel systems to change driver power management policy for PCIe
NVMe drives. Some newer Intel platforms, like some Comet Lake systems,
require that PCIe devices use D3 when doing suspend-to-idle in order to
allow the platform to realize maximum power savings. This is particularly
needed to support ATX power supply shutdown on desktop systems. In order to
ensure this happens for root ports with storage devices, Microsoft
apparently created this ACPI _DSD property as a way to influence their
driver policy. To my knowledge this property has not been discussed with
the NVME specification body.
Though the solution is not ideal, it addresses a problem that also affects
Linux since the NVMe driver's default policy of using NVMe APST during
suspend-to-idle prevents the PCI root port from going to D3 and leads to
higher power consumption for these platforms. The power consumption
difference may be negligible on laptop systems, but many watts on desktop
systems when the ATX power supply is blocked from powering down.
The patch creates a new nvme_acpi_storage_d3 function to check for the
StorageD3Enable property during probe and enables D3 as a quirk if set. It
also provides a 'noacpi' module parameter to allow skipping the quirk if
needed.
Tested with:
- PM961 NVMe SED Samsung 512GB
- INTEL SSDPEKKF512G8
Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Plumb the platform specific backend for the generic libnvdimm firmware
activate interface. Register dimm level operations to arm/disarm
activation, and register bus level operations to report the dynamic
platform-quiesce time relative to the number of dimms armed for firmware
activation.
A new nfit-specific bus attribute "firmware_activate_noidle" is added to
allow the activation to switch between platform enforced, and OS
opportunistic device quiesce. In other words, let the hibernate cycle
handle in-flight device-dma rather than the platform attempting to
increase PCI-E timeouts and the like.
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Some HW devices are created as child devices of proprietary busses,
that have a bus specific policy defining how the child devices
wires representing the devices ID are translated into IOMMU and
IRQ controllers device IDs.
Current IORT code provides translations for:
- PCI devices, where the device ID is well identified at bus level
as the requester ID (RID)
- Platform devices that are endpoint devices where the device ID is
retrieved from the ACPI object IORT mappings (Named components single
mappings). A platform device is represented in IORT as a named
component node
For devices that are child devices of proprietary busses the IORT
firmware represents the bus node as a named component node in IORT
and it is up to that named component node to define in/out bus
specific ID translations for the bus child devices that are
allocated and created in a bus specific manner.
In order to make IORT ID translations available for proprietary
bus child devices, the current ACPI (and IORT) code must be
augmented to provide an additional ID parameter to acpi_dma_configure()
representing the child devices input ID. This ID is bus specific
and it is retrieved in bus specific code.
By adding an ID parameter to acpi_dma_configure(), the IORT
code can map the child device ID to an IOMMU stream ID through
the IORT named component representing the bus in/out ID mappings.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The PCI bus domain number (used in the iort_match_node_callback() -
pci_domain_nr() call) is cascaded through the PCI bus hierarchy at PCI
bus enumeration time, therefore there is no need in iort_find_dev_node()
to walk the PCI bus upwards to grab the root bus to be passed to
iort_scan_node(), the device->bus PCI bus pointer will do.
Remove this useless code.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lore.kernel.org/r/20200619082013.13661-5-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There is nothing PCI specific in iort_msi_map_rid().
Rename the function using a bus protocol agnostic name,
iort_msi_map_id(), and convert current callers to it.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lore.kernel.org/r/20200619082013.13661-4-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
iort_get_device_domain() is PCI specific but it need not be,
since it can be used to retrieve IRQ domain nexus of any kind
by adding an irq_domain_bus_token input to it.
Make it PCI agnostic by also renaming the requestor ID input
to a more generic ID name.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci/msi.c
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lore.kernel.org/r/20200619082013.13661-3-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When the iort_match_node_callback is invoked for a named component
the match should be executed upon a device with an ACPI companion.
For devices with no ACPI companion set-up the ACPI device tree must be
walked in order to find the first parent node with a companion set and
check the parent node against the named component entry to check whether
there is a match and therefore an IORT node describing the in/out ID
translation for the device has been found.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lore.kernel.org/r/20200619082013.13661-2-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The variable rc is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_map_pxm_to_node() will never return a NUMA node greater than
MAX_NUMNODES, so the 'node >= MAX_NUMNODES' check is not needed.
Remove it.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In acpi_parse_entries_array(), the subtable entries (entry.hdr)
will never be NULL, so for ACPI subtable handler in struct
acpi_subtable_proc, will never handle NULL subtable entries.
Remove those useless subtable pointer checks in the callback
handlers.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
acpi_disabled, pointer id and table_header are checked in
acpi_table_parse_entries_array(), and acpi_parse_entries_array() is
only called by acpi_table_parse_entries_array(), so those checks in
acpi_parse_entries_array() are duplicate.
Remove those duplicated checks and move the table_size check to
acpi_table_parse_entries_array() as well.
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit e17b28cfcc31918d0db9547b6b274b09c413eb70
Object reference counts are used as a part of ACPICA's garbage
collection mechanism. This mechanism keeps track of references to
heap-allocated structures such as the ACPI operand objects.
Recent server firmware has revealed that this reference count can
overflow on large servers that declare many field units under the
same operation_region. This occurs because each field unit declaration
will add a reference count to the source operation_region.
This change solves the reference count overflow for operation_regions
objects by preventing fieldunits from incrementing their
operation_region's reference count. Each operation_region's reference
count will not be changed by named objects declared under the Field
operator. During namespace deletion, the operation_region namespace
node will be deleted and each fieldunit will be deleted without
touching the deleted operation_region object.
Link: https://github.com/acpica/acpica/commit/e17b28cf
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 7ba2f3d91a32f104765961fda0ed78b884ae193d
The current codebase makes use of one-element arrays in the following
form:
struct something {
int length;
u8 data[1];
};
struct something *instance;
instance = kmalloc(sizeof(*instance) + size, GFP_KERNEL);
instance->length = size;
memcpy(instance->data, source, size);
but the preferred mechanism to declare variable-length types such as
these ones is a flexible array member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure,
which will help us prevent some kind of undefined behavior bugs from
being inadvertently introduced[3] to the linux codebase from now on.
This issue was found with the help of Coccinelle and audited _manually_.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Link: https://github.com/acpica/acpica/commit/7ba2f3d9
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Acked-by: Vishal Verma <vishal.l.verma@intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, acpi.info is an invalid link to access ACPI specification,
the new valid link is https://uefi.org/specifications.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fold acpi_os_map_cleanup_deferred() into acpi_os_map_remove() and
pass the latter to INIT_RCU_WORK() in acpi_os_drop_map_ref() to make
the code more straightforward.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no reason (knwon to me) why any of the existing users of
acpi_os_unmap_iomem() would need to wait for the unused memory
mappings left by it to actually go away, so use the deferred
unmapping of ACPI memory introduced previously in that function.
While at it, fold __acpi_os_unmap_iomem() back into
acpi_os_unmap_iomem(), which has become a simple wrapper around it,
and make acpi_os_unmap_memory() call the latter.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There is no reason (knwon to me) why any of the existing users of
acpi_os_unmap_generic_address() would need to wait for the unused
memory mappings left by it to actually go away, so use the deferred
unmapping of ACPI memory introduced previously in that function.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPICA's strategy with respect to the handling of memory mappings
associated with memory operation regions is to avoid mapping the
entire region at once which may be problematic at least in principle
(for example, it may lead to conflicts with overlapping mappings
having different attributes created by drivers). It may also be
wasteful, because memory opregions on some systems take up vast
chunks of address space while the fields in those regions actually
accessed by AML are sparsely distributed.
For this reason, a one-page "window" is mapped for a given opregion
on the first memory access through it and if that "window" does not
cover an address range accessed through that opregion subsequently,
it is unmapped and a new "window" is mapped to replace it. Next,
if the new "window" is not sufficient to acess memory through the
opregion in question in the future, it will be replaced with yet
another "window" and so on. That may lead to a suboptimal sequence
of memory mapping and unmapping operations, for example if two fields
in one opregion separated from each other by a sufficiently wide
chunk of unused address space are accessed in an alternating pattern.
The situation may still be suboptimal if the deferred unmapping
introduced previously is supported by the OS layer. For instance,
the alternating memory access pattern mentioned above may produce
a relatively long list of mappings to release with substantial
duplication among the entries in it, which could be avoided if
acpi_ex_system_memory_space_handler() did not release the mapping
used by it previously as soon as the current access was not covered
by it.
In order to improve that, modify acpi_ex_system_memory_space_handler()
to preserve all of the memory mappings created by it until the memory
regions associated with them go away.
Accordingly, update acpi_ev_system_memory_region_setup() to unmap all
memory associated with memory opregions that go away.
Reported-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Xiang Li <xiang.z.li@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI OS layer in Linux uses RCU to protect the walkers of the
list of ACPI memory mappings from seeing an inconsistent state
while it is being updated. Among other situations, that list can
be walked in (NMI and non-NMI) interrupt context, so using a
sleeping lock to protect it is not an option.
However, performance issues related to the RCU usage in there
appear, as described by Dan Williams:
"Recently a performance problem was reported for a process invoking
a non-trival ASL program. The method call in this case ends up
repetitively triggering a call path like:
acpi_ex_store
acpi_ex_store_object_to_node
acpi_ex_write_data_to_field
acpi_ex_insert_into_field
acpi_ex_write_with_update_rule
acpi_ex_field_datum_io
acpi_ex_access_region
acpi_ev_address_space_dispatch
acpi_ex_system_memory_space_handler
acpi_os_map_cleanup.part.14
_synchronize_rcu_expedited.constprop.89
schedule
The end result of frequent synchronize_rcu_expedited() invocation is
tiny sub-millisecond spurts of execution where the scheduler freely
migrates this apparently sleepy task. The overhead of frequent
scheduler invocation multiplies the execution time by a factor
of 2-3X."
The source of this is that acpi_ex_system_memory_space_handler()
unmaps the memory mapping currently cached by it at the access time
if that mapping doesn't cover the memory area being accessed.
Consequently, if there is a memory opregion with two fields
separated from each other by an unused chunk of address space that
is large enough for not being covered by a single mapping, and they
happen to be used in an alternating pattern, the unmapping will
occur on every acpi_ex_system_memory_space_handler() invocation for
that memory opregion and that will lead to significant overhead.
Moreover, acpi_ex_system_memory_space_handler() carries out the
memory unmapping with the namespace and interpreter mutexes held
which may lead to additional latency, because all of the tasks
wanting to acquire on of these mutexes need to wait for the
memory unmapping operation to complete.
To address that, rework acpi_os_unmap_memory() so that it does not
release the memory mapping covering the given address range right
away and instead make it queue up the mapping at hand for removal
via queue_rcu_work().
Reported-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Xiang Li <xiang.z.li@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Augment the existing firmware update emulation to track activations and
validate proper update vs activate sequencing.
The DIMM firmware activate capability has a concept of a maximum amount
of time platform firmware will quiesce the system relative to how many
DIMMs are being activated in parallel. Simulate that DIMM activation
happens serially, 1 second per-DIMM, and limit the max at 3 seconds. The
nfit_test0 bus emulates 5 DIMMs so it will take 2 activations to update
all DIMMs.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Platform reboots are expensive. Towards reducing downtime to apply
firmware updates the Intel NVDIMM command definition is growing support
for applying live firmware updates that only require temporarily
suspending memory traffic instead of a full reboot.
Follow-on commits add support for triggering firmware activation, this
patch only defines the commands, adds probe support, and validates that
they are blocked via the ioctl path. The ioctl-path block ensures that
the OS is in charge since these commands have side effects only the OS
can handle. Specifically firmware activation may cause the memory
controller to be quiesced on the order of 100s of milliseconds. In that
case Linux ensure the activation only takes place while the OS is in a
suspend state.
Link: https://pmem.io/documents/IntelOptanePMem_DSM_Interface-V2.0.pdf
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
DSMs are strictly an ACPI mechanism, evict the bus_dsm_mask concept from
the generic 'struct nvdimm_bus_descriptor' object.
As a side effect the test facility ->bus_nfit_cmd_force_en is no longer
necessary. The test infrastructure can communicate that information
directly in ->bus_dsm_mask.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
The ND_CMD_CALL format allows for a general passthrough of passlisted
commands targeting a given command set. However there is no validation
of the family index relative to what the bus supports.
- Update the NFIT bus implementation (the only one that supports
ND_CMD_CALL passthrough) to also passlist the valid set of command
family indices.
- Update the generic __nd_ioctl() path to validate that field on behalf
of all implementations.
Fixes: 31eca76ba2 ("nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism")
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
thermal_zone_device_update() can now handle disabled thermal zones, so
the check here is not needed.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200703104354.19657-2-andrzej.p@collabora.com
Tiger Lake's new unique ACPI device ID for Fan is not valid
because of missing 'C' in the ID. Use correct fan device ID.
Fixes: c248dfe7e0 ("ACPI: fan: Add Tiger Lake ACPI device ID")
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Cc: 5.6+ <stable@vger.kernel.org> # 5.6+
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Setting polling_delay is now done at thermal_core level (by not polling
DISABLED devices), so no need to repeat this code.
int340x: Checking for an impossible enum value is unnecessary.
acpi/thermal: It only prints debug messages.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
[for acerhdf]
Acked-by: Peter Kaestle <peter@piie.net>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200629122925.21729-11-andrzej.p@collabora.com
Rafael J. Wysocki
Ard Biesheuvel
Furquan Shaikh
Linus Torvalds
Akshu Agrawal
Pu Wen
Dan Williams
Neal Liu
David E. Box
Lorenzo Pieralisi
Colin Ian King
Hanjun Guo
Erik Kaneda
Gustavo A. R. Silva
Alexander A. Klimov
Tiezhu Yang
Andrzej Pietrasiewicz
Sumeet Pawnikar