Resign from ->alloc_dma_buf() and use snd_dma_alloc_pages() directly.
For data i.e.: base firmware binary transfer, make use of SG allocation
to better adapt to memory-limited environment. For BDL descriptor, given
its small size this is not required.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
AudioDSP cores and HDAudio links need to be turned off on shutdown to
ensure no communication or data transfer occurs during the procedure.
Fixes: c5a76a2469 ("ASoC: Intel: Skylake: Add shutdown callback")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Provide a single location for pipe config selection where all fields
that have to be updated whenever ->pipe_config_idx changes can be
updated accordingly.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Field ->pipe_config_idx duplicates the job of ->cur_config_idx so
remove it.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rather than forcing userspace to select proper format with enumerable
kcontrols, select it ourselves based on provided hw_params.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Without updating the index before BE copier config is filled with
hardware parameters, outdated parameters are used instead.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
HDMI audio is not working on the HP EliteDesk 800 G6 because the pin is
unconnected. This issue can be resolved by using the 'hdajackretask'
tool to override the unconnected pin to force it to connect.
Signed-off-by: Jiao Zhou <jiaozhou@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221206185311.3669950-1-jiaozhou@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:
- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
There's more cross tree updates than usual, though all fairly minor:
- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.
Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOOO08ACgkQJNaLcl1U
h9BiIAf+O8zqcxtokSTS3wsoFHDp2zprTTUk3RZbxaYMFTmFrALbQVUx5EdJ179X
Dr9rL9T2iNBN7YGhDvmzoVvLrDncJEerMk7cgbc88a5tkB7ZipI7E9QliZt92QaP
ihrXAyD7ekLC6QLXrHFNmzwUeFspgtsBkT3MakcfcucuMN53UQbFwD1r0ziCJOMZ
gFnkZKBemUDsURxWR+LCveB/WYKNrZ6Bjokdg8HY1yenACMiXaoWedmIFJ2SxId3
NNS8vqUDUSEFhDaeJVBo1Ow9m8fe+dZBUeVk9Ej7bGEXxYptwtu3aODXknySa8Eb
YVlalR9qQPvaI1688WRleRWp+oyL4Q==
=x1AC
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.2
This is a fairly sedate release for the core code, but there's been a
lot of driver work especially around the x86 platforms and device tree
updates:
- More cleanups of the DAPM code from Morimoto-san.
- Factoring out of mapping hw_params onto SoundWire configuration by
Charles Keepax.
- The ever ongoing overhauls of the Intel DSP code continue, including
support for loading libraries and probes with IPC4 on SOF.
- Support for more sample formats on JZ4740.
- Lots of device tree conversions and fixups.
- Support for Allwinner D1, a range of AMD and Intel systems, Mediatek
systems with multiple DMICs, Nuvoton NAU8318, NXP fsl_rpmsg and
i.MX93, Qualcomm AudioReach Enable, MFC and SAL, RealTek RT1318 and
Rockchip RK3588
There's more cross tree updates than usual, though all fairly minor:
- Some OMAP board file updates that were depedencies for removing their
providers in ASoC, as part of a wider effort removing the support for
the relevant OMAP platforms.
- A new I2C API required for updates to the new I2C probe API.
- A DRM update making use of a new API for fixing the capabilities
advertised via hdmi-codec.
Since this is being sent early I might send some more stuff if you've
not yet sent your pull request and there's more come in.
I got a null-ptr-defer error report when I do the following tests
on the qemu platform:
make defconfig and CONFIG_PARPORT=m, CONFIG_PARPORT_PC=m,
CONFIG_SND_MTS64=m
Then making test scripts:
cat>test_mod1.sh<<EOF
modprobe snd-mts64
modprobe snd-mts64
EOF
Executing the script, perhaps several times, we will get a null-ptr-defer
report, as follow:
syzkaller:~# ./test_mod.sh
snd_mts64: probe of snd_mts64.0 failed with error -5
modprobe: ERROR: could not insert 'snd_mts64': No such device
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 0 PID: 205 Comm: modprobe Not tainted 6.1.0-rc8-00588-g76dcd734eca2 #6
Call Trace:
<IRQ>
snd_mts64_interrupt+0x24/0xa0 [snd_mts64]
parport_irq_handler+0x37/0x50 [parport]
__handle_irq_event_percpu+0x39/0x190
handle_irq_event_percpu+0xa/0x30
handle_irq_event+0x2f/0x50
handle_edge_irq+0x99/0x1b0
__common_interrupt+0x5d/0x100
common_interrupt+0xa0/0xc0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:_raw_write_unlock_irqrestore+0x11/0x30
parport_claim+0xbd/0x230 [parport]
snd_mts64_probe+0x14a/0x465 [snd_mts64]
platform_probe+0x3f/0xa0
really_probe+0x129/0x2c0
__driver_probe_device+0x6d/0xc0
driver_probe_device+0x1a/0xa0
__device_attach_driver+0x7a/0xb0
bus_for_each_drv+0x62/0xb0
__device_attach+0xe4/0x180
bus_probe_device+0x82/0xa0
device_add+0x550/0x920
platform_device_add+0x106/0x220
snd_mts64_attach+0x2e/0x80 [snd_mts64]
port_check+0x14/0x20 [parport]
bus_for_each_dev+0x6e/0xc0
__parport_register_driver+0x7c/0xb0 [parport]
snd_mts64_module_init+0x31/0x1000 [snd_mts64]
do_one_initcall+0x3c/0x1f0
do_init_module+0x46/0x1c6
load_module+0x1d8d/0x1e10
__do_sys_finit_module+0xa2/0xf0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 1 seconds..
The mts wa not initialized during interrupt, we add check for
mts to fix this bug.
Fixes: 68ab801e32 ("[ALSA] Add snd-mts64 driver for ESI Miditerminal 4140")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221206061004.1222966-1-cuigaosheng1@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
The patchset focuses on debug functionality for the avs-driver.
Two major blocks are covered here: data probing and AudioDSP firmware
logging. Both are configured and controlled through debugfs.
Data probing is a AudioDSP debug functionality which allows for
gathering the actual data that is being routed to or from a module.
Helps in debugging its processing capabilities - navigate to a specific
module which may have caused a glitch within a pipeline (set of modules
bound together).
First few allow for assigning compress stream to a HDAudio stream, what
is currently limited to pcm substreams only. These patches were already
present on this list and reviewed in the past [1].
The next few tidy existing debug-related code up so it's ready for
addition of new functionalities and make it clear which part of the avs
is debug related and which is not. These also simplify the existing
locking around the trace fifo.
Afterward, debug-related IPCs are defined along with stub soc-component
and compress DAI operations. Not much is done there as it's not a
standard PCM streaming scenario. Most code found in compress operations
is inherited from the HOST side of HDAudio streaming found in pcm.c
file of the driver.
Finally, a debugfs file operations are defined. These facilitate
connecting to DSP modules from which the data shall be gathered as well
as control and configuration of firmware logging. Additionally, entries
are added to allow for dumping snapshots of key memory windows.
sof_es8336_remove() calls cancel_delayed_work(). However, that
function does not wait until the work function finishes. This
means that the callback function may still be running after
the driver's remove function has finished, which would result
in a use-after-free.
Fix by calling cancel_delayed_work_sync(), which ensures that
the work is properly cancelled, no longer running, and unable
to re-schedule itself.
Fixes: 89cdb224f2 ("ASoC: sof_es8336: reduce pop noise on speaker")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221205143721.3988988-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>:
Fix an issue with starting the ACP DSP and support debug dumps to aid
maintainability.
The Dell Inspiron Plus 16, in both laptop and 2in1 form factor, has top
speakers connected on NID 0x17, which the codec reports as unconnected.
These speakers should be connected to the DAC on NID 0x03.
Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Link: https://lore.kernel.org/r/20221205163713.7476-1-p.jungkamp@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
New HW platforms with multiple CS42L42 parts, faster CPU and i2c
requre some extra delay to allow PLL to settle and lock. Adding
extra 10ms delay.
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221205145713.23852-1-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Don't populate the read-only arrays capture_reg_H and capture_reg_L
on the stack but instead make them static const. Also makes the
object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221202171450.1815346-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the read-only arrays slotsel_2ch, slotsel_multi, v_pll
and v_div on the stack but instead make them static const. Also makes
the object code a little smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221202164156.1812971-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the read-only array minCode_param on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221202170644.1814720-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add __maybe_unused tag for system PM ops suspend and resume.
This is required to fix allmodconfig compilation issue.
Fixes: a3a96e93cc ("ASoC: qcom: lpass-sc7280: Add system suspend/resume PM ops")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/1670219333-32526-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Skyrim project and Whiterun met error when DSP
loading during device boot.
Ex, error in kernel log,
ERR kernel: [ 16.124537] snd_sof_amd_rembrandt
0000:04:00.5: PSP validation failed.
Use the snd_sof_dsp_read_poll_timeout function to successfully
read the FW_QUALIFIER register
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221205120649.1950576-2-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SRAM0 window begins with a block of memory, usually of size PAGE_SIZE,
dedicated to the base firmware registers. When debugging firmware, it is
desirable to be able to dump them at will.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221202152841.672536-16-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When user closes the tracer, some logs may still remain in the tail of
the buffer as firmware sends LOG_BUFFER_STATUS notification only when
certain threshold of data is reached. Add whatever is left to already
gathered logs so no information is lost.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221202152841.672536-15-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define debugfs subdirectory delegated for IPC communication with DSP.
Input format: uint,uint,(...) which are later translated into DWORDS
sequence and further into instances of struct of interest given the IPC
type.
For Extractor probes, following have been enabled:
- PROBE_POINT_ADD (echo <..> probe_points)
- PROBE_POINT_REMOVE (echo <..> probe_points_remove)
- PROBE_POINT_INFO (cat probe_points)
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221202152841.672536-14-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Define stub component for data probing. Stub as most operations from
standard PCM case do not apply here. Specific bits are CPU DAIs and
compress_ops. FE DAIs can link against these new CPU DAI to create new
compress devices.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221202152841.672536-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compress operations handlers for data extraction through probes. A
single HDAudio stream is enlisted for said purpose. Operations follow
same protocol as for standard PCM streaming on HOST side.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221202152841.672536-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Data probing is a cAVS firmware functionality that allows for data
extraction and injection directly from or to DMA stream. To support it,
new functions and types are added. These facilitate communication
with the firmware.
Total of eight IPCs:
- probe module initialization and cleanup
- addition and removal of probe points
- addition and removal of injection DMAs
- dumping list of currently connected probe points or enlisted DMAs
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221202152841.672536-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch to debug-context aware wrappers instead of accessing debug
members directly allowing for readable separation of debug and non-debug
related code. Duplicates are removed along the way.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221202152841.672536-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Without debug filesystem present, this code is redundant.
Operations: log_buffer_status and log_buffer_offset are left as is as
EXCEPTION_CAUGHT and even unexpected LOG_BUFFER_STATUS notifications may
occur without user ever touching debugfs.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221202152841.672536-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Debug-related fields and log-dumping are useful when debugfs is enabled.
Define them under CONFIG_DEBUG_FS and provide stubs when the config is
disabled so that the code that makes use of these needs not to be
complicated unnecessarily.
Members that are duplicated by this patch will be removed by the follow
up changes.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221202152841.672536-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Account for compress streams when receiving and servicing buffer
completed interrupts. In case of compress stream enlisting hdac_stream
for data transfer, setup BDL entries much like it is the case for PCM
streams.
Signed-off-by: Divya Prakash <divya1.prakash@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20221202152841.672536-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Before introducing compress specific changes, adjust BDL and parameters
setup functions so these are not tightly coupled with PCM streams.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20221202152841.672536-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently only PCM streams can enlist hdac_stream for their data
transfer. Add cstream field to hdac_ext_stream to expose possibility of
compress stream assignment in place of PCM one.
Limited to HOST-type only as there no other users on the horizon.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20221202152841.672536-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Under certain situations (typically in the implicit feedback mode),
USB-audio driver starts a playback stream already at PCM prepare call
even before the actual PCM trigger-START call. For implicit feedback
mode, this effectively starts two streams for data and sync
endpoints, and if a coupled sync stream gets XRUN at this point, it
results in an error -EPIPE.
The problem is that currently we return -EPIPE error as is from the
prepare. Then application tries to recover again via the prepare
call, but it'll fail again because the sync-stop is missing. The
sync-stop is missing because it's an internal trigger call (hence the
PCM core isn't involved).
Since we'll need to re-issue the prepare in anyway when trapped into
this pitfall, this patch attempts to address it in a bit different
way; namely, the driver tries to prepare once again after syncing the
stop manually by itself -- so applications don't see the internal
error. At the second failure, we report the error as is, but this
shouldn't happen in normal situations.
Reported-and-tested-by: Carl Hetherington <lists@carlh.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/b4e71631-4a94-613-27b2-fb595792630@carlh.net
Link: https://lore.kernel.org/r/20221205132124.11585-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When the driver returns -EPIPE for indicating an XRUN already at PCM
trigger START, we should treat properly and set it to the XRUN state.
Otherwise the state is missing and the application would try to issue
trigger again without knowing that it's in an error state.
This is just for a theoretical bug, and it won't happen in most
cases.
Link: https://lore.kernel.org/r/b4e71631-4a94-613-27b2-fb595792630@carlh.net
Link: https://lore.kernel.org/r/20221205132124.11585-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a PCM trigger-start fails at snd_pcm_do_start(), PCM core tries
to undo the action at snd_pcm_undo_start() by issuing the trigger STOP
manually. At that point, we forgot to set the stop_operating flag,
hence the sync-stop won't be issued at the next prepare or other
calls.
This patch adds the missing stop_operating flag at
snd_pcm_undo_start().
Fixes: 1e850beea2 ("ALSA: pcm: Add the support for sync-stop operation")
Link: https://lore.kernel.org/r/b4e71631-4a94-613-27b2-fb595792630@carlh.net
Link: https://lore.kernel.org/r/20221205132124.11585-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Mark Brown <broonie@kernel.org>:
The recently added pcm-test selftest has pointed out that systems with
the tda998x driver end up advertising that they support capture when in
reality as far as I can see the tda998x devices are transmit only. The
DAIs registered through hdmi-codec are bidirectional, meaning that for
I2S systems when combined with a typical bidrectional CPU DAI the
overall capability of the PCM is bidirectional. In most cases the I2S
links will clock OK but no useful audio will be returned which isn't so
bad but we should still not advertise the useless capability, and some
systems may notice problems for example due to pinmux management.
This is happening due to the hdmi-codec helpers not providing any
mechanism for indicating unidirectional audio so add one and use it in
the tda998x driver. It is likely other hdmi-codec users are also
affected but I don't have those systems to hand.
Mark Brown (2):
ASoC: hdmi-codec: Allow playback and capture to be disabled
drm: tda99x: Don't advertise non-existent capture support
drivers/gpu/drm/i2c/tda998x_drv.c | 2 ++
include/sound/hdmi-codec.h | 4 ++++
sound/soc/codecs/hdmi-codec.c | 30 +++++++++++++++++++++++++-----
3 files changed, 31 insertions(+), 5 deletions(-)
base-commit: f0c4d9fc9c
--
2.30.2
Currently the hdmi-codec driver always registers both playback and capture
capabilities but for most systems there's no actual capture capability,
usually HDMI is transmit only. Provide platform data which allows the users
to indicate what is supported so that we don't end up advertising things
to userspace that we can't actually support.
In order to avoid breaking existing users the flags in platform data are
a bit awkward and specify what should be disabled rather than doing the
perhaps more expected thing and defaulting to not supporting capture.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221130184644.464820-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The OMTP pin define headsets can be mis-detected as line out
instead of OMTP, causing obvious issues with audio quality.
This patch is to put increased resistances within
the device at a suitable point.
To solve this issue better, the new mechanism setup
ground switches with conditional delay control
and these allow for more stabile detection process
to operate as intended. This conditional delay control
will not impact the hardware process
but use extra system resource.
This commit improves control of ground switches in the AAD logic.
Signed-off-by: David Rau <david.rau.zg@renesas.com>
Link: https://lore.kernel.org/r/20221121050744.2278-1-david.rau.zg@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following a commit 1dd0dd0b1f ("ALSA: firewire: Remove some left-over
license text in sound/firewire"), this patch removes it added carelessly.
Fixes: 2133dc91d6 ("ALSA: dice: add support for Focusrite Saffire Pro 40 with TCD3070 ASIC")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20221201030100.31495-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some more fixes for v6.1, some of these are very old and were originally
intended to get sent for v5.18 but got lost in the shuffle when there
was an issue with Linus not liking my branching strategy and I rebuilt
bits of my workflow. The ops changes have been validated by people
looking at real hardware and are how things getting dropped got noticed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmOHg3AACgkQJNaLcl1U
h9AO+gf8C1E6GHk6UI3mU/xYCap0KgJavCVEJKExal2/pgCtCheC8OutFRAepsEM
mnbhfNImFEEkD/3YfdhH22XqavDE+fN0DSfFhkdiEbsfPTrHhc+PeWU8aQzEyOxT
tND7X01tmkWojmmoWJcVAv/z7hW1vF3FE/RUOiXHi3M7LhlJiSMy2ZkxHC9AEIz/
3jyahc2LbzZ5SuIo+c8kSoErg/mZ8zI2KlAGx3afpFAHUiGkSVWmhl4XOQ+1lozQ
dv4JtPMDx7SsM06GXUcvVTf6RI8QZQq6ohfz02BK7+NqD+odRrg3WlbabcTLvi1k
LpNg5saPWYx8JVwHu9ggLtNfE5TAVQ==
=T8ew
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.1-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.1
Some more fixes for v6.1, some of these are very old and were originally
intended to get sent for v5.18 but got lost in the shuffle when there
was an issue with Linus not liking my branching strategy and I rebuilt
bits of my workflow. The ops changes have been validated by people
looking at real hardware and are how things getting dropped got noticed.
TC Applied Technologies (TCAT) produces TCD3070 as final DICE ASIC for
communication in IEEE 1394 bus for IEC 61883-1/6 protocol. As long as I
know, latter model of Focusrite Saffire Pro 40 is an application of the
ASIC and only in the market for consumers.
This patchset adds support for the device. The device has several
remarkable points.
1. No support for extended synchronization information section in TCAT
general protocol. The value of GLOBAL_EXTENDED_STATUS register is always
zero. Additionally, NOTIFY_EXT_STATUS message is never emitted.
2. No support for TCAT protocol extension. Hard coding is required for
format of CIP payload.
3. During several seconds after changing sampling rate, the block to
process PCM frames is under disfunction. When starting packet streaming
during the state, the block is never function till configuring different
sampling rate and several seconds.
This commit adds support for the device. The item 1 and 2 can be
adaptable, while item 3 is not. It's not preferable that user process
is forced to sleep during the disfunction in the call of ioctl(2) with
SNDRV_PCM_IOCTL_HW_PARAMS or SNDRV_PCM_IOCTL_PREPARE request. It's
inconvenient but let user configure preferable sampling rate in advance
of starting PCM substream.
The content of configuration ROM in the device I used is available at:
* https://github.com/takaswie/am-config-roms/
I note that any mixer control operation is implemented by unique
transaction. The frame of request consists of 16 bytes header followed
by payload.
header (4 quadlets):
1st: the type of request, prefixed with 0x8000
2nd: counter at 2 bytes in MSB side, the length of data at 2 bytes in LSB
side
3rd: parameter 0
4th: parameter 1
payload (variable length if need):
5th-: data according to parameters
The request frame is sent by block write request to 0x'ffff'e040'01c0.
The frame of response is similar to the frame of request, but it is
header only, thus fixed to 16 bytes. The response frame is sent to the
address which is registered by lock transaction to 0x'ffff'e040'0008.
If the operation results in batch of data, the 2nd quadlet of header
includes the length of data like request. The data is itself readable
by read block request to 0x'ffff'e040'0030, which includes both
header and payload for data, thus the length to read should be the
length of data plus 16 bytes for header
The actual value of request, parameter 0, parameter 1, and data is
unclear yet.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20221130143313.43880-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For Lexicon I-ONIX FW810S, the call of ioctl(2) with
SNDRV_PCM_IOCTL_HW_PARAMS can returns -ETIMEDOUT. This is a regression due
to the commit 41319eb56e ("ALSA: dice: wait just for
NOTIFY_CLOCK_ACCEPTED after GLOBAL_CLOCK_SELECT operation"). The device
does not emit NOTIFY_CLOCK_ACCEPTED notification when accepting
GLOBAL_CLOCK_SELECT operation with the same parameters as current ones.
This commit fixes the regression. When receiving no notification, return
-ETIMEDOUT as long as operating for any change.
Fixes: 41319eb56e ("ALSA: dice: wait just for NOTIFY_CLOCK_ACCEPTED after GLOBAL_CLOCK_SELECT operation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20221130130604.29774-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This model requires an additional detection quirk to enable the
internal microphone - BIOS doesn't seem to support AcpDmicConnected
(nothing in acpidump output).
Signed-off-by: Artem Lukyanov <dukzcry@ya.ru>
Link: https://lore.kernel.org/r/20221130085247.85126-1-dukzcry@ya.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
If we do not shutdown the peripheral properly at shutdown, the whole system
crashes after kexec() on the first io access.
Let's implement the appropriate callback.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221127-mtk-snd-v1-0-b7886faa612b@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Leftover from recent series [1].
Following changes are proposed for the rt5682 sound card driver:
1) Move jack unassignment from platform_device->remove() to
dai_link->exit(). This is done to make jack init and deinit flows
symmetric
2) Remove platform_device->remove() function
3) Simplify card->suspend_pre() and card->resume_post() by making use of
snd_soc_card_get_codec_dai() helper
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221129180738.2866290-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following commits will make use of it to find codec DAI, define it
first.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221129180738.2866290-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by going to
err_pm instead of err_clk.
Fixes:f086ba9d5389c ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160402.126140-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
For all the boards included in this patchset, a similar set of changes
is proposed:
1) Move jack unassignment from platform_device->remove() to
dai_link->exit(). This is done to make jack init and deinit flows
symmetric
2) Remove platform_device->remove() function
3) Simplify card->suspend_pre() and card->resume_post() by making use of
snd_soc_card_get_codec_dai() helper
While bdw_rt286 board - which is utilized by the catpt-driver - is
definitely not part of "avs", same treatment applies. And thus decided
to make it part of this series instead of sending it separately.
Add __maybe_unused tag for system PM ops suspend and resume.
This is required to fix allmodconfig compilation issue.
Fixes: a3a96e93cc ("ASoC: qcom: lpass-sc7280: Add system suspend/resume PM ops")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Link: https://lore.kernel.org/r/1669726428-3140-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Tascam's Model 12 is a mixer which can also operate as a USB audio
interface. The audio interface uses explicit feedback but it seems that
it does not correctly handle missing isochronous frames.
When injecting an xrun (or doing anything else that pauses the playback
stream) the feedback rate climbs (for example, at 44,100Hz nominal, I
see a stable rate around 44,099 but xrun injection sees this peak at
around 44,135 in most cases) and glitches are heard in the audio stream
for several seconds - this is significantly worse than the single glitch
expected for an underrun.
While the stream does normally recover and the feedback rate returns to
a stable value, I have seen some occurrences where this does not happen
and the rate continues to increase while no audio is heard from the
output. I have not found a solid reproduction for this.
This misbehaviour can be avoided by totally resetting the stream state
by switching the interface to alt 0 and back before restarting the
playback stream.
Add a new quirk flag which forces the endpoint and interface to be
reconfigured whenever the stream is stopped, and use this for the Tascam
Model 12.
Separate interfaces are used for the playback and capture endpoints, so
resetting the playback interface here will not affect the capture stream
if it is running. While there are two endpoints on the interface,
these are the OUT data endpoint and the IN explicit feedback endpoint
corresponding to it and these are always stopped and started together.
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20221129130100.1257904-1-john@metanate.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following commits will make use of it to find codec DAI, define it
first.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Following commits will make use of it to find codec DAI, define it
first.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is existing define for codec DAI name, make use of it when setting
codec DAI name.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use link->exit() rather than pdev->remove() to unassign jack during card
unbind procedure so codec link initialization and exit procedures are
symmetrical.
Also, there is no need to perform search for codec dai in suspend_pre()
and resume_post() ourselves. Use snd_soc_card_get_codec_dai() instead.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221125184032.2565979-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sc7180_lpass_dev_resume() logs an error if clk_bulk_prepare_enable()
fails. The clock framework already generates error logs if anything
goes wrong, so the logging in _resume() is redundant, drop it.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221129001633.v2.1.I8d1993f41f0da1eac0ecba321678ac489f9c0b9b@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Update lpass sc7280 platform driver with PM ops, such as
system supend and resume callbacks.
This update is required to disable clocks during supend and
avoid XO shutdown issue.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Rahul Ajmeriya <quic_rajmeriy@quicinc.com>
Link: https://lore.kernel.org/r/1669703784-27589-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a HP ProBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221128022849.13759-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the device does not come straight from reset, we might receive an IRQ
before we are ready to handle it.
Fixes:
[ 2.334737] Unable to handle kernel read from unreadable memory at virtual address 00000000000001e4
[ 2.522601] Call trace:
[ 2.525040] regmap_read+0x1c/0x80
[ 2.528434] mt8173_afe_irq_handler+0x40/0xf0
...
[ 2.598921] start_kernel+0x338/0x42c
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Fixes: ee0bcaff10 ("ASoC: mediatek: Add AFE platform driver")
Link: https://lore.kernel.org/r/20221128-mt8173-afe-v1-0-70728221628f@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Strings need to be specially marked in trace events to ensure the
content is captured, othewise the trace just shows the value of the
pointer.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20221125162327.297440-1-john@metanate.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release().
Fixes: 3285ea10e9 ("ALSA: asihpi - Interrelated HPI tidy up.")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221126021429.3029562-1-liushixin2@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Update lpass sc7180 platform driver with PM ops, such as
system supend and resume callbacks.
This update is required to disable clocks during supend and
avoid XO shutdown issue.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Rahul Ajmeriya <quic_rajmeriy@quicinc.com>
Link: https://lore.kernel.org/r/1669621742-28524-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We found an corner case in RT5640 codec driver which schedules jack work
after system suspend as IRQ was enabled. Due to this, hitting the error
as register access happening after suspend as jack worker thread getting
scheduled in irq handler. The patch disables the irq during the suspend
to prevent the corner case happening.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Mohan Kumar D <mkumard@nvidia.com>
Link: https://lore.kernel.org/r/20221128070825.91215-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221127193549.211bf8f7@endymion.delvare
Signed-off-by: Mark Brown <broonie@kernel.org>
For 8kHz and 16kHz sample rates and certain PCLK values
the codec can be programmed to operate in exact integer
mode. If available, use it to achieve the exact sample rate.
Signed-off-by: Pavel Dobias <dobias@2n.com>
Link: https://lore.kernel.org/r/20221123153818.24650-1-dobias@2n.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current rsnd_adg_clk_dbg_info() is using locak clk_name[] to ndicating
clk name, but we don't want to use local clk_name[] everywhere when we
support R-Car Gen4 sound to handling non compatible clk naming.
This patch uses __clk_get_name() instead of local clk_name[] for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8mz8wcs.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-9-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from hw_params to SoundWire config is pretty
standard as such most of the conversion can be handled by the new
snd_sdw_params_to_config helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 0166dc11be ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/r/20221127193441.0b54484d@endymion.delvare
Signed-off-by: Mark Brown <broonie@kernel.org>
By default clock source is selected as internal clock of 96Mhz
which is not configurable. Now we select the clock source to
external clock (ACLK) which can be configurable to different clock
ranges depending on usecase.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221123121911.3446224-3-vsujithkumar.reddy@amd.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
By default the position updates are read from dsp box when streambox
size is not defined.if the streambox size is defined to some value
then position updates can be read from the streambox.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221123121911.3446224-2-vsujithkumar.reddy@amd.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Nicolas Frattaroli <frattaroli.nicolas@gmail.com>:
This patchset refactors the Rockchip I2S/TDM driver in order to
support the RK3588 SoC, and then adds the necessary compatible
string to load the driver for it.
Patch 1 rectifies a problem with the bindings where we were too
strict about requiring the rockchip,grf property. Most features
of this audio device don't need access to the GRF to function.
Patch 2 modifies the driver to adjust its behaviour to what the
changed bindings now allow, namely using most things without the
GRF.
Patch 3 and 4 are boring compatible string stuff that enables
RK3588 support. No special data is needed to initialise the
driver for this instance of the I2S/TDM IP.
The ADAU1372 contains 24bit ADCs and DACs. Allow the driver to use
its native mode which uses the same settings as the current 32 bit
mode.
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/20221028152626.109603-3-maarten.zanders@mind.be
Signed-off-by: Mark Brown <broonie@kernel.org>
The DAPM control for PGAx uses the PGA mute bit for
power management. This bit is active high but is set to
non-inverted (ie when powering, it will mute).
The ALSA control "PGA x Capture Switch" uses the active
high PGA_ENx bit, but is set to inverted. So when
enabling this switch, the PGA gets disabled.
To correct the behaviour, invert both these bits.
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/20221028152626.109603-4-maarten.zanders@mind.be
Signed-off-by: Mark Brown <broonie@kernel.org>
"mclk" is retrieved from the configuration and assigned to adau1372->clk.
However adau1372->mclk (==NULL) is used for clk_prepare_enable() and
clk_disable_unprepare() which don't have any effect.
Remove .clk from struct adau1372 and use .mclk throughout.
This change ensures that the input clock is switched on/off when the
bias level is changed.
Signed-off-by: Maarten Zanders <maarten.zanders@mind.be>
Link: https://lore.kernel.org/r/20221028152626.109603-2-maarten.zanders@mind.be
Signed-off-by: Mark Brown <broonie@kernel.org>
As the mtk_btcvsd_snd_write and mtk_btcvsd_snd_read may return error,
it should be better to catch the exception.
Fixes: 4bd8597dc3 ("ASoC: mediatek: add btcvsd driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221116030750.40500-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Only IO Multiplex and two TRCM modes need access to the GRF, so
making it a hard requirement is not a wise idea, as it complicates
support for newer SoCs which do not do these things.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20221025124132.399729-3-frattaroli.nicolas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Brent Lu
Cezary Rojewski
Edward Pacman
wangdicheng
Jiao Zhou
Takashi Iwai
Gaosheng Cui
Mark Brown
Yang Yingliang
Philipp Jungkamp
Vitaly Rodionov
Colin Ian King
Srinivasa Rao Mandadapu
V sujith kumar Reddy
Ajye Huang
David Rau
Takashi Sakamoto
Artem Lukyanov
Ricardo Ribalda
Amadeusz Sławiński
Zhang Qilong
John Keeping
Matthias Kaehlcke
Andy Chi
Liu Shixin
Oder Chiou
Jean Delvare
Pavel Dobias
Kuninori Morimoto
Charles Keepax
Maarten Zanders
Jiasheng Jiang
Nicolas Frattaroli