The Allwinner SoCs have a display engine composed of several controllers
assembled differently depending on the SoC, the number and type of output
they have, and the additional features they provide. A number of those are
supported in Linux, with the matching bindings.
Now that we have the DT validation in place, let's split into separate file
and convert the device tree bindings for those controllers to schemas.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200103152801.47254-1-maxime@cerno.tech
Add bindings for the BOE NV140FHM-N49 14" 1920x1080 panel.
The panel is used by the pine64 Pinebook Pro.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tobias Schramm <t.schramm@manjaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109140742.GA12940@ravnborg.org
The Sony ACX424AKP is a command/videomode DSI panel for
mobile devices. It is used on the ST-Ericsson HREF520
reference design. We support video mode by default, but
it is possible to switch the panel into command mode
by using the bool property "dsi-command-mode".
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109072815.334867-1-linus.walleij@linaro.org
The udl driver for DisplayLink devices depends on support for host-side
USB controllers, which is enabled with CONFIG_USB. Plain USB support as
given by CONFIG_USB_SUPPORT is not sufficient.
This patch changes dependencies for udl to depend on CONFIG_USB, instead
of CONFIG_USB_SUPPORT. Users will have to enable CONFIG_USB and select a
USB host controller. With this change udl dependencies work the same way
as dependencies for PCI drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106141016.9562-1-tzimmermann@suse.de
drm_sched_job_timedout works with drm_sched_stop as a pair,
so we'd better use the drm_sched_fault helper to make the
error and timeout handling go the same path.
This also fixes application hang when task error.
Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200101103831.22429-1-yuq825@gmail.com
There is an increasing number of new simple panels.
Common for many of these simple panels are that they have one
mandatory power-supply and some of them have backlight and / or
an enable gpio.
The binding file to describe these panels adds overhead
that really do not add value.
The binding are known and there is nothing gained from a
dedicated binding file nor for any dedicated example.
The following patch introduces a single panel-simple.yaml
and converts two ampire bindings over to the new file.
The conversion - if applied will have following effects:
- The maintainer for the individual file will change
There is no need for many different maintainers for a simple binding.
We have the same situation with the panel-simple driver in the kernel.
- The license will change to (GPL-2.0-only OR BSD-2-Clause)
There is usually only a single line copied from the original
file, a line that is often copied from a datasheet.
This license change should be acceptable considered what little
is copied.
If the license change is not OK we can use a dedicated binding
file in these cases.
This is a follow-up on Rob's big patch converting a lot of panel bindings
to individual files:
"dt-bindings: display: Convert a bunch of panels to DT schema"
https://patchwork.ozlabs.org/patch/1197683/
The objectives with one file for the relevant simple panels are:
- Make it simpler to add bindings for simple panels
- Keep the number of bindings file lower and thus easier to find a
relevant file to copy from when adding new panels.
- Keep the binding documentation for simple panels more consistent
- Make it simpler to add support for new panels
v3:
- Whitespace fix (checkpatch)
- Indent compatible (Rob h)
- Indent comments to give compatible more visibility (Rob h)
v2:
- spelling fixes (imirkin via irc, Rob)
- updated description (Rob)
- list properires in alphabetical order
- added power-supply to example (Rob)
- updated title
- reworded changelog a little
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200102101712.5085-2-sam@ravnborg.org
Since the if statement only checks for the value of the `id` variable,
it can be replaced by the more concise BUG_ON() macro for error
reporting.
Issue found using coccinelle.
Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102095515.7106-1-wambui.karugax@gmail.com
Casting a pointer to dma_addr_t produces a warning:
drivers/gpu/drm/meson/meson_rdma.c: In function 'meson_rdma_free':
drivers/gpu/drm/meson/meson_rdma.c:59:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
priv->rdma.addr_phys = (dma_addr_t)NULL;
In this case, it's worse because the variable name has the suffix
'_phys', which often indicates a phys_addr_t rather than dma_addr_t,
i.e. yet another incompatible type.
Change it to use consistent naming and avoid NULL.
Fixes: 63fba242c4 ("drm/meson: add RDMA module driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107214653.1173199-1-arnd@arndb.de
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/gpu/drm/gma500/psb_irq.c: In function psb_irq_turn_off_dpst:
drivers/gpu/drm/gma500/psb_irq.c:473:6:
warning: variable hist_reg set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227114811.14907-1-chenzhou10@huawei.com
The DRC needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.
Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-2-maxime@cerno.tech
The backend needs to run at 300MHz to be functional. This was done so far
using assigned-clocks in the device tree, but that is easy to forget, and
doesn't provide any other guarantee than the rate is going to be roughly
the one requested at probe time.
Therefore it's pretty fragile, so let's just use the exclusive clock API to
enforce it.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107165957.672435-1-maxime@cerno.tech
Commit 05193dc381 ("drm/bridge: Make the bridge chain a double-linked
list") patched the bridge chain logic to use a double-linked list instead
of a single-linked list. This change induced changes to the Exynos driver
which was manually resetting the encoder->bridge element to NULL to
control the enable/disable sequence of the bridge chain. During this
conversion, 2 bugs were introduced:
1/ list_splice() was used to move chain elements to our own internal
chain, but list_splice() does not reset the source list to an empty
state, leading to unexpected bridge hook calls when
drm_bridge_chain_xxx() helpers were called by the core. Replacing
the list_splice() call by list_splice_init() fixes this problem.
2/ drm_bridge_chain_xxx() helpers operate on the
bridge->encoder->bridge_chain list, which is now empty. When the
helper uses list_for_each_entry_reverse() we end up with no operation
done which is not what we want. But that's even worse when the helper
uses list_for_each_entry_from(), because in that case we end up in
an infinite loop searching for the list head element which is no
longer encoder->bridge_chain but exynos_dsi->bridge_chain. To address
that problem we stop using the bridge chain helpers and call the
hooks directly.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 05193dc381 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227144124.210294-3-boris.brezillon@collabora.com
Commit 05193dc381 ("drm/bridge: Make the bridge chain a double-linked
list") patched the bridge chain logic to use a double-linked list instead
of a single-linked list. This change induced changes to the VC4 driver
which was manually resetting the encoder->bridge element to NULL to
control the enable/disable sequence of the bridge chain. During this
conversion, 2 bugs were introduced:
1/ list_splice() was used to move chain elements to our own internal
chain, but list_splice() does not reset the source list to an empty
state, leading to unexpected bridge hook calls when
drm_bridge_chain_xxx() helpers were called by the core. Replacing
those list_splice() calls by list_splice_init() ones fixes this
problem.
2/ drm_bridge_chain_xxx() helpers operate on the
bridge->encoder->bridge_chain list, which is now empty. When the
helper uses list_for_each_entry_reverse() we end up with no operation
done which is not what we want. But that's even worse when the helper
uses list_for_each_entry_from(), because in that case we end up in
an infinite loop searching for the list head element which is no
longer encoder->bridge_chain but vc4_dsi->bridge_chain. To address
that problem we stop using the bridge chain helpers and call the
hooks directly.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Eric Anholt <eric@anholt.net>
Fixes: 05193dc381 ("drm/bridge: Make the bridge chain a double-linked list")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227144124.210294-2-boris.brezillon@collabora.com
Remove dev_err() messages after platform_get_irq*() failures.
Line 450 is redundant because platform_get_irq() already prints
an error.
Generated by: scripts/coccinelle/api/platform_get_irq.cocci
Fixes: dd90e9ae55 ("video: fbdev: mmp: add COMPILE_TEST support")
Signed-off-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/alpine.DEB.2.21.2001042140310.6944@hadrien
This reverts commit 6ed7e9625f ("drm/bridge: Add a drm_bridge_state
object") which introduced a circular dependency between drm.ko and
drm_kms_helper.ko. Looks like the helper/core split is not appropriate
and fixing that is not simple.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-6-boris.brezillon@collabora.com
This reverts commit f7619a58ef ("drm/bridge: Patch atomic hooks to
take a drm_bridge_state"). Commit 6ed7e9625f ("drm/bridge: Add a
drm_bridge_state object") introduced a circular dependency between
drm.ko and drm_kms_helper.ko which uncovered a misdesign in how the
whole thing was implemented. Let's revert all patches depending on the
bridge_state infrastructure for now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-5-boris.brezillon@collabora.com
This reverts commit b86d895524 ("drm/bridge: Add an ->atomic_check()
hook"). Commit 6ed7e9625f ("drm/bridge: Add a drm_bridge_state
object") introduced a circular dependency between drm.ko and
drm_kms_helper.ko which uncovered a misdesign in how the whole thing
was implemented. Let's revert all patches depending on the bridge_state
infrastructure for now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-4-boris.brezillon@collabora.com
This reverts commit e351e4d5ea ("drm/bridge: Add the necessary bits
to support bus format negotiation"). Commit 6ed7e9625f ("drm/bridge:
Add a drm_bridge_state object") introduced a circular dependency
between drm.ko and drm_kms_helper.ko which uncovered a misdesign in
how the whole thing was implemented. Let's revert all patches depending
on the bridge_state infrastructure for now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-3-boris.brezillon@collabora.com
This reverts commit b18398c16e ("drm/bridge: Fix a NULL pointer
dereference in drm_atomic_bridge_chain_check()"). Commit 6ed7e9625f
("drm/bridge: Add a drm_bridge_state object") introduced a circular
dependency between drm.ko and drm_kms_helper.ko which uncovered a
misdesign in how the whole thing was implemented. Let's revert all
patches depending on the bridge_state infrastructure for now.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107185807.606999-2-boris.brezillon@collabora.com
to terminate the while-loop in drm_dp_aux_crc_work when
drm_dp_start/stop_crc are called in the hook to set crc source.
v3: set crc->opened to false without checking (Nick)
v2: Move spin_lock around entire crc->opened use (Daniel)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Nick Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190726173743.11641-1-dingchen.zhang@amd.com
userspace may transfer a newline, and this terminating newline
is replaced by a '\0' to avoid followup issues.
'len-1' is the index to replace the newline of CRC source name.
v3: typo fix (Sam)
v2: update patch subject, body and format. (Sam)
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dingchen Zhang <dingchen.zhang@amd.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610134751.14356-1-dingchen.zhang@amd.com
drm_atomic_bridge_chain_check() callers can pass a NULL bridge. Let's
bail out before dereferencing the bridge pointer when that happens.
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: b86d895524 ("drm/bridge: Add an ->atomic_check() hook")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107113031.435604-1-boris.brezillon@collabora.com
For hardware that does not interpret the startadd field correctly,
add the module parameter 'hw_bug_no_startadd', which enables the
workaround.
v3:
* style and typo fixes
v2:
* ask user for feedback if the option is active
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: John Donnelly <john.p.donnelly@oracle.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191126101950.11989-1-tzimmermann@suse.de
Drivers that what to allocate VRAM GEM objects with additional fields
can now do this by implementing struct drm_driver.gem_create_object.
v3:
* separately check allocation failure in if/else branches
before upcast to gbo
v2:
* only cast to gbo within if branch; set gbo directly
in else branch
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-9-tzimmermann@suse.de
TTM is an implementation detail of the VRAM helpers and therefore
shouldn't be exposed to the callers. There's only one correct value
for the BO device anyway, which is the one stored in the DRM device.
So remove struct ttm_bo_device from the VRAM-helper interface and
use the device's VRAM manager unconditionally. The GEM initializer
function fails if the VRAM manager has not been initialized.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-8-tzimmermann@suse.de
The flag 'interruptible', which is passed to various functions,
is always set to be false. Remove it and hard-code the value.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106125745.13797-7-tzimmermann@suse.de
drm_bridge_state is extended to describe the input and output bus
configurations. These bus configurations are exposed through the
drm_bus_cfg struct which encodes the configuration of a physical
bus between two components in an output pipeline, usually between
two bridges, an encoder and a bridge, or a bridge and a connector.
The bus configuration is stored in drm_bridge_state separately for
the input and output buses, as seen from the point of view of each
bridge. The bus configuration of a bridge output is usually identical
to the configuration of the next bridge's input, but may differ if
the signals are modified between the two bridges, for instance by an
inverter on the board. The input and output configurations of a
bridge may differ if the bridge modifies the signals internally,
for instance by performing format conversion, or*modifying signals
polarities.
Bus format negotiation is automated by the core, drivers just have
to implement the ->atomic_get_{output,input}_bus_fmts() hooks if they
want to take part to this negotiation. Negotiation happens in reverse
order, starting from the last element of the chain (the one directly
connected to the display) up to the first element of the chain (the one
connected to the encoder).
During this negotiation all supported formats are tested until we find
one that works, meaning that the formats array should be in decreasing
preference order (assuming the driver has a preference order).
Note that the bus format negotiation works even if some elements in the
chain don't implement the ->atomic_get_{output,input}_bus_fmts() hooks.
In that case, the core advertises only MEDIA_BUS_FMT_FIXED and lets
the previous bridge element decide what to do (most of the time, bridge
drivers will pick a default bus format or extract this piece of
information from somewhere else, like a FW property).
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
[narmstrong: fixed doc in include/drm/drm_bridge.h:69 fmt->format]
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-5-narmstrong@baylibre.com
So that bridge drivers have a way to check/reject an atomic operation.
The drm_atomic_bridge_chain_check() (which is just a wrapper around
the ->atomic_check() hook) is called in place of
drm_bridge_chain_mode_fixup() (when ->atomic_check() is not implemented,
the core falls back on ->mode_fixup(), so the behavior should stay
the same for existing bridge drivers).
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-4-narmstrong@baylibre.com
This way the drm_bridge_funcs interface is consistent with the rest of
the subsystem.
The only driver implementing those hooks (analogix DP) is patched too.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
[narmstrong: renamed state as old_bridge_state in rcar_lvds_atomic_disable]
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-3-narmstrong@baylibre.com
One of the last remaining objects to not have its atomic state.
This is being motivated by our attempt to support runtime bus-format
negotiation between elements of the bridge chain.
This patch just paves the road for such a feature by adding a new
drm_bridge_state object inheriting from drm_private_obj so we can
re-use some of the existing state initialization/tracking logic.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106143409.32321-2-narmstrong@baylibre.com
This reverts commit d2c755e66617620b729041c625a6396c81d1231c
("drm: atmel-hlcdc: enable sys_clk during initalization."). With
commit "drm: atmel-hlcdc: enable clock before configuring timing engine"
there is no need for this patch. Code is also simpler.
Cc: Sandeep Sheriker Mallikarjun <sandeepsheriker.mallikarjun@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-7-git-send-email-claudiu.beznea@microchip.com
The intention was to only select a higher pixel-clock rate than the
requested, if a slight overclocking would result in a rate significantly
closer to the requested rate than if the conservative lower pixel-clock
rate is selected. The fixed patch has the logic the other way around and
actually prefers the higher frequency. Fix that.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 9946a3a9db ("drm/atmel-hlcdc: allow selecting a higher pixel-clock than requested")
Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: <stable@vger.kernel.org> # v4.20+
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-6-git-send-email-claudiu.beznea@microchip.com
Changing pixel clock source without having this clock source enabled
will block the timing engine and the next operations after (in this case
setting ATMEL_HLCDC_CFG(5) settings in atmel_hlcdc_crtc_mode_set_nofb()
will fail). It is recomended (although in datasheet this is not present)
to actually enabled pixel clock source before doing any changes on timing
enginge (only SAM9X60 datasheet specifies that the peripheral clock and
pixel clock must be enabled before using LCD controller).
Fixes: 1a396789f6 ("drm: add Atmel HLCDC Display Controller support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <stable@vger.kernel.org> # v4.0+
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-3-git-send-email-claudiu.beznea@microchip.com
Doubled system clock should be used as pixel cock source only if this
is supported. This is emphasized by the value of
atmel_hlcdc_crtc::dc::desc::fixed_clksrc.
Fixes: a6eca2abdd ("drm: atmel-hlcdc: add config option for clock selection")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-2-git-send-email-claudiu.beznea@microchip.com
Miquel Raynal
Maxime Ripard
Benjamin Gaignard
Tobias Schramm
Sam Ravnborg
Linus Walleij
Thomas Zimmermann
Hans Verkuil
Paul Cercueil
Qiang Yu
Rob Clark
Dan Carpenter
Wambui Karuga
Arnd Bergmann
Chen Zhou
Boris Brezillon
kbuild test robot
Dingchen Zhang
Andrzej Pietrasiewicz
Claudiu Beznea
Peter Rosin