Граф коммитов

25 Коммитов

Автор SHA1 Сообщение Дата
Eric Biggers 7bcb2c99f8 crypto: algapi - use common mechanism for inheriting flags
The flag CRYPTO_ALG_ASYNC is "inherited" in the sense that when a
template is instantiated, the template will have CRYPTO_ALG_ASYNC set if
any of the algorithms it uses has CRYPTO_ALG_ASYNC set.

We'd like to add a second flag (CRYPTO_ALG_ALLOCATES_MEMORY) that gets
"inherited" in the same way.  This is difficult because the handling of
CRYPTO_ALG_ASYNC is hardcoded everywhere.  Address this by:

  - Add CRYPTO_ALG_INHERITED_FLAGS, which contains the set of flags that
    have these inheritance semantics.

  - Add crypto_algt_inherited_mask(), for use by template ->create()
    methods.  It returns any of these flags that the user asked to be
    unset and thus must be passed in the 'mask' to crypto_grab_*().

  - Also modify crypto_check_attr_type() to handle computing the 'mask'
    so that most templates can just use this.

  - Make crypto_grab_*() propagate these flags to the template instance
    being created so that templates don't have to do this themselves.

Make crypto/simd.c propagate these flags too, since it "wraps" another
algorithm, similar to a template.

Based on a patch by Mikulas Patocka <mpatocka@redhat.com>
(https://lore.kernel.org/r/alpine.LRH.2.02.2006301414580.30526@file01.intranet.prod.int.rdu2.redhat.com).

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-07-16 21:49:08 +10:00
Eric Biggers c282586fc3 crypto: chacha20poly1305 - use crypto_grab_ahash() and simplify error paths
Make the rfc7539 and rfc7539esp templates use the new function
crypto_grab_ahash() to initialize their ahash spawn.

This is needed to make all spawns be initialized in a consistent way.

Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet, and
by taking advantage of crypto_grab_*() now handling ERR_PTR() names.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-09 11:30:56 +08:00
Eric Biggers b9f76dddb1 crypto: skcipher - pass instance to crypto_grab_skcipher()
Initializing a crypto_skcipher_spawn currently requires:

1. Set spawn->base.inst to point to the instance.
2. Call crypto_grab_skcipher().

But there's no reason for these steps to be separate, and in fact this
unneeded complication has caused at least one bug, the one fixed by
commit 6db4341017 ("crypto: adiantum - initialize crypto_spawn::inst")

So just make crypto_grab_skcipher() take the instance as an argument.

To keep the function calls from getting too unwieldy due to this extra
argument, also introduce a 'mask' variable into the affected places
which weren't already using one.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-09 11:30:54 +08:00
Eric Biggers af5034e8e4 crypto: remove propagation of CRYPTO_TFM_RES_* flags
The CRYPTO_TFM_RES_* flags were apparently meant as a way to make the
->setkey() functions provide more information about errors.  But these
flags weren't actually being used or tested, and in many cases they
weren't being set correctly anyway.  So they've now been removed.

Also, if someone ever actually needs to start better distinguishing
->setkey() errors (which is somewhat unlikely, as this has been unneeded
for a long time), we'd be much better off just defining different return
values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.

So just remove CRYPTO_TFM_RES_MASK and all the unneeded logic that
propagates these flags around.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-09 11:30:53 +08:00
Linus Torvalds 4d2fa8b44b Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 5.3:

  API:
   - Test shash interface directly in testmgr
   - cra_driver_name is now mandatory

  Algorithms:
   - Replace arc4 crypto_cipher with library helper
   - Implement 5 way interleave for ECB, CBC and CTR on arm64
   - Add xxhash
   - Add continuous self-test on noise source to drbg
   - Update jitter RNG

  Drivers:
   - Add support for SHA204A random number generator
   - Add support for 7211 in iproc-rng200
   - Fix fuzz test failures in inside-secure
   - Fix fuzz test failures in talitos
   - Fix fuzz test failures in qat"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
  crypto: stm32/hash - remove interruptible condition for dma
  crypto: stm32/hash - Fix hmac issue more than 256 bytes
  crypto: stm32/crc32 - rename driver file
  crypto: amcc - remove memset after dma_alloc_coherent
  crypto: ccp - Switch to SPDX license identifiers
  crypto: ccp - Validate the the error value used to index error messages
  crypto: doc - Fix formatting of new crypto engine content
  crypto: doc - Add parameter documentation
  crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
  crypto: arm64/aes-ce - add 5 way interleave routines
  crypto: talitos - drop icv_ool
  crypto: talitos - fix hash on SEC1.
  crypto: talitos - move struct talitos_edesc into talitos.h
  lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
  crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
  crypto: asymmetric_keys - select CRYPTO_HASH where needed
  crypto: serpent - mark __serpent_setkey_sbox noinline
  crypto: testmgr - dynamically allocate crypto_shash
  crypto: testmgr - dynamically allocate testvec_config
  crypto: talitos - eliminate unneeded 'done' functions at build time
  ...
2019-07-08 20:57:08 -07:00
Eric Biggers 76cadf2244 crypto: chacha20poly1305 - a few cleanups
- Use sg_init_one() instead of sg_init_table() then sg_set_buf().

- Remove unneeded calls to sg_init_table() prior to scatterwalk_ffwd().

- Simplify initializing the poly tail block.

- Simplify computing padlen.

This doesn't change any actual behavior.

Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-13 14:31:40 +08:00
Eric Biggers 7545b6c208 crypto: chacha20poly1305 - fix atomic sleep when using async algorithm
Clear the CRYPTO_TFM_REQ_MAY_SLEEP flag when the chacha20poly1305
operation is being continued from an async completion callback, since
sleeping may not be allowed in that context.

This is basically the same bug that was recently fixed in the xts and
lrw templates.  But, it's always been broken in chacha20poly1305 too.
This was found using syzkaller in combination with the updated crypto
self-tests which actually test the MAY_SLEEP flag now.

Reproducer:

    python -c 'import socket; socket.socket(socket.AF_ALG, 5, 0).bind(
    	       ("aead", "rfc7539(cryptd(chacha20-generic),poly1305-generic)"))'

Kernel output:

    BUG: sleeping function called from invalid context at include/crypto/algapi.h:426
    in_atomic(): 1, irqs_disabled(): 0, pid: 1001, name: kworker/2:2
    [...]
    CPU: 2 PID: 1001 Comm: kworker/2:2 Not tainted 5.2.0-rc2 #5
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014
    Workqueue: crypto cryptd_queue_worker
    Call Trace:
     __dump_stack lib/dump_stack.c:77 [inline]
     dump_stack+0x4d/0x6a lib/dump_stack.c:113
     ___might_sleep kernel/sched/core.c:6138 [inline]
     ___might_sleep.cold.19+0x8e/0x9f kernel/sched/core.c:6095
     crypto_yield include/crypto/algapi.h:426 [inline]
     crypto_hash_walk_done+0xd6/0x100 crypto/ahash.c:113
     shash_ahash_update+0x41/0x60 crypto/shash.c:251
     shash_async_update+0xd/0x10 crypto/shash.c:260
     crypto_ahash_update include/crypto/hash.h:539 [inline]
     poly_setkey+0xf6/0x130 crypto/chacha20poly1305.c:337
     poly_init+0x51/0x60 crypto/chacha20poly1305.c:364
     async_done_continue crypto/chacha20poly1305.c:78 [inline]
     poly_genkey_done+0x15/0x30 crypto/chacha20poly1305.c:369
     cryptd_skcipher_complete+0x29/0x70 crypto/cryptd.c:279
     cryptd_skcipher_decrypt+0xcd/0x110 crypto/cryptd.c:339
     cryptd_queue_worker+0x70/0xa0 crypto/cryptd.c:184
     process_one_work+0x1ed/0x420 kernel/workqueue.c:2269
     worker_thread+0x3e/0x3a0 kernel/workqueue.c:2415
     kthread+0x11f/0x140 kernel/kthread.c:255
     ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352

Fixes: 71ebc4d1b2 ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Cc: <stable@vger.kernel.org> # v4.2+
Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-06-06 14:44:16 +08:00
Thomas Gleixner 2874c5fd28 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 3029 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:26:32 -07:00
Eric Biggers c4741b2305 crypto: run initcalls for generic implementations earlier
Use subsys_initcall for registration of all templates and generic
algorithm implementations, rather than module_init.  Then change
cryptomgr to use arch_initcall, to place it before the subsys_initcalls.

This is needed so that when both a generic and optimized implementation
of an algorithm are built into the kernel (not loadable modules), the
generic implementation is registered before the optimized one.
Otherwise, the self-tests for the optimized implementation are unable to
allocate the generic implementation for the new comparison fuzz tests.

Note that on arm, a side effect of this change is that self-tests for
generic implementations may run before the unaligned access handler has
been installed.  So, unaligned accesses will crash the kernel.  This is
arguably a good thing as it makes it easier to detect that type of bug.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-18 22:15:03 +08:00
Eric Biggers 5e27f38f1f crypto: chacha20poly1305 - set cra_name correctly
If the rfc7539 template is instantiated with specific implementations,
e.g. "rfc7539(chacha20-generic,poly1305-generic)" rather than
"rfc7539(chacha20,poly1305)", then the implementation names end up
included in the instance's cra_name.  This is incorrect because it then
prevents all users from allocating "rfc7539(chacha20,poly1305)", if the
highest priority implementations of chacha20 and poly1305 were selected.
Also, the self-tests aren't run on an instance allocated in this way.

Fix it by setting the instance's cra_name from the underlying
algorithms' actual cra_names, rather than from the requested names.
This matches what other templates do.

Fixes: 71ebc4d1b2 ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Cc: <stable@vger.kernel.org> # v4.2+
Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-04-08 14:42:55 +08:00
Xiongfeng Wang 1a5e02b680 crypto: chacha20poly1305 - use template array registering API to simplify the code
Use crypto template array registering API to simplify the code.

Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2019-01-25 18:41:52 +08:00
Eric Biggers 1ca1b91794 crypto: chacha20-generic - refactor to allow varying number of rounds
In preparation for adding XChaCha12 support, rename/refactor
chacha20-generic to support different numbers of rounds.  The
justification for needing XChaCha12 support is explained in more detail
in the patch "crypto: chacha - add XChaCha12 support".

The only difference between ChaCha{8,12,20} are the number of rounds
itself; all other parts of the algorithm are the same.  Therefore,
remove the "20" from all definitions, structures, functions, files, etc.
that will be shared by all ChaCha versions.

Also make ->setkey() store the round count in the chacha_ctx (previously
chacha20_ctx).  The generic code then passes the round count through to
chacha_block().  There will be a ->setkey() function for each explicitly
allowed round count; the encrypt/decrypt functions will be the same.  I
decided not to do it the opposite way (same ->setkey() function for all
round counts, with different encrypt/decrypt functions) because that
would have required more boilerplate code in architecture-specific
implementations of ChaCha and XChaCha.

Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-20 14:26:55 +08:00
Cristian Stoica 193188e551 crypto: chacha20poly1305 - export CHACHAPOLY_IV_SIZE
Move CHACHAPOLY_IV_SIZE to header file, so it can be reused.

Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-16 14:11:03 +08:00
Eric Biggers e57121d08c crypto: chacha20poly1305 - validate the digest size
If the rfc7539 template was instantiated with a hash algorithm with
digest size larger than 16 bytes (POLY1305_DIGEST_SIZE), then the digest
overran the 'tag' buffer in 'struct chachapoly_req_ctx', corrupting the
subsequent memory, including 'cryptlen'.  This caused a crash during
crypto_skcipher_decrypt().

Fix it by, when instantiating the template, requiring that the
underlying hash algorithm has the digest size expected for Poly1305.

Reproducer:

    #include <linux/if_alg.h>
    #include <sys/socket.h>
    #include <unistd.h>

    int main()
    {
            int algfd, reqfd;
            struct sockaddr_alg addr = {
                    .salg_type = "aead",
                    .salg_name = "rfc7539(chacha20,sha256)",
            };
            unsigned char buf[32] = { 0 };

            algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
            bind(algfd, (void *)&addr, sizeof(addr));
            setsockopt(algfd, SOL_ALG, ALG_SET_KEY, buf, sizeof(buf));
            reqfd = accept(algfd, 0, 0);
            write(reqfd, buf, 16);
            read(reqfd, buf, 16);
    }

Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 71ebc4d1b2 ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-12-22 19:02:33 +11:00
Eric Biggers 60425a8bad crypto: skcipher - Get rid of crypto_spawn_skcipher2()
Since commit 3a01d0ee2b ("crypto: skcipher - Remove top-level
givcipher interface"), crypto_spawn_skcipher2() and
crypto_spawn_skcipher() are equivalent.  So switch callers of
crypto_spawn_skcipher2() to crypto_spawn_skcipher() and remove it.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-11-01 08:37:17 +08:00
Eric Biggers a35528eca0 crypto: skcipher - Get rid of crypto_grab_skcipher2()
Since commit 3a01d0ee2b ("crypto: skcipher - Remove top-level
givcipher interface"), crypto_grab_skcipher2() and
crypto_grab_skcipher() are equivalent.  So switch callers of
crypto_grab_skcipher2() to crypto_grab_skcipher() and remove it.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-11-01 08:37:16 +08:00
Herbert Xu 1e1f006112 crypto: chacha20poly1305 - Use skcipher
This patch converts chacha20poly1305 to use the new skcipher
interface as opposed to ablkcipher.

It also fixes a buglet where we may end up with an async poly1305
when the user asks for a async algorithm.  This shouldn't be a
problem yet as there aren't any async implementations of poly1305
out there.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-18 17:35:41 +08:00
Jason A. Donenfeld 161151d79f crypto: chacha20poly1305 - Skip encryption/decryption for 0-len
If the length of the plaintext is zero, there's no need to waste cycles
on encryption and decryption. Using the chacha20poly1305 construction
for zero-length plaintexts is a common way of using a shared encryption
key for AAD authentication.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-12-09 20:16:04 +08:00
Herbert Xu 5e4b8c1fcc crypto: aead - Remove CRYPTO_ALG_AEAD_NEW flag
This patch removes the CRYPTO_ALG_AEAD_NEW flag now that everyone
has been converted.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-08-17 16:53:53 +08:00
Martin Willi 2546f811ef crypto: poly1305 - Export common Poly1305 helpers
As architecture specific drivers need a software fallback, export Poly1305
init/update/final functions together with some helpers in a header file.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:26 +08:00
Martin Willi 31d7247da5 crypto: chacha20 - Export common ChaCha20 helpers
As architecture specific drivers need a software fallback, export a
ChaCha20 en-/decryption function together with some helpers in a header
file.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-07-17 21:20:21 +08:00
Herbert Xu 7479092233 crypto: chacha20poly1305 - Convert to new AEAD interface
This patch converts rfc7539 and rfc7539esp to the new AEAD interface.
The test vectors for rfc7539esp have also been updated to include
the IV.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Martin Willi <martin@strongswan.org>
2015-07-17 21:20:19 +08:00
Martin Willi c2b7b20aed crypto: poly1305 - Pass key as first two message blocks to each desc_ctx
The Poly1305 authenticator requires a unique key for each generated tag. This
implies that we can't set the key per tfm, as multiple users set individual
keys. Instead we pass a desc specific key as the first two blocks of the
message to authenticate in update().

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-17 15:35:11 +08:00
Martin Willi 4db4ad2609 crypto: chacha20poly1305 - Add an IPsec variant for RFC7539 AEAD
draft-ietf-ipsecme-chacha20-poly1305 defines the use of ChaCha20/Poly1305 in
ESP. It uses additional four byte key material as a salt, which is then used
with an 8 byte IV to form the ChaCha20 nonce as defined in the RFC7539.

Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04 15:04:53 +08:00
Martin Willi 71ebc4d1b2 crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539
This AEAD uses a chacha20 ablkcipher and a poly1305 ahash to construct the
ChaCha20-Poly1305 AEAD as defined in RFC7539. It supports both synchronous and
asynchronous operations, even if we currently have no async chacha20 or poly1305
drivers.

Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-06-04 15:04:52 +08:00