riscv64-none-linux-gnu-ld: mm/page_alloc.o: in function `.L0 ':
page_alloc.c:(.text+0xd34): undefined reference to `__kernel_map_pages'
riscv64-none-linux-gnu-ld: page_alloc.c:(.text+0x104a): undefined reference to `__kernel_map_pages'
riscv64-none-linux-gnu-ld: mm/page_alloc.o: in function `__pageblock_pfn_to_page':
page_alloc.c:(.text+0x145e): undefined reference to `__kernel_map_pages'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
phy_restart_aneg() enables aneg in the PHY. That's not what we want
if phydev->autoneg is disabled. In this case still update EEE
advertisement register, but don't enable aneg and don't trigger an
aneg restart.
Fixes: f75abeb833 ("net: phy: restart phy autonegotiation after EEE advertisment change")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
i915_gem_evict_something() is charged with finding a slot within the GTT
that we may reuse. Since our goal is not to stall, we first look for a
slot that only overlaps idle vma. To this end, on the first pass we move
any active vma to the end of the search list. However, we only stopped
moving active vma after we see the first active vma twice. If during the
search, that first active vma completed, we would not notice and keep on
extending the search list.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1746
Fixes: 2850748ef8 ("drm/i915: Pull i915_vma_pin under the vm->mutex")
Fixes: b1e3177bd1 ("drm/i915: Coordinate i915_active with its own mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200509115217.26853-1-chris@chris-wilson.co.uk
(cherry picked from commit 73e28cc40b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The GENET controller on the Raspberry Pi 4 (2711) is typically
interfaced with an external Broadcom PHY via a RGMII electrical
interface. To make sure that delays are properly configured at the PHY
side, ensure that we the dedicated Broadcom PHY driver
(CONFIG_BROADCOM_PHY) is enabled for this to happen.
Fixes: 402482a6a7 ("net: bcmgenet: Clear ID_MODE_DIS in EXT_RGMII_OOB_CTRL when not needed")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tuong Lien says:
====================
tipc: add some patches
This series adds patches to fix some issues in TIPC streaming & service
subscription.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When a service subscription is expired or canceled by user, it needs to
be deleted from the subscription list, so that new subscriptions can be
registered (max = 65535 per net). However, there are two issues in code
that can cause such an unused subscription to persist:
1) The 'tipc_conn_delete_sub()' has a loop on the subscription list but
it makes a break shortly when the 1st subscription differs from the one
specified, so the subscription will not be deleted.
2) In case a subscription is canceled, the code to remove the
'TIPC_SUB_CANCEL' flag from the subscription filter does not work if it
is a local subscription (i.e. the little endian isn't involved). So, it
will be no matches when looking for the subscription to delete later.
The subscription(s) will be removed eventually when the user terminates
its topology connection but that could be a long time later. Meanwhile,
the number of available subscriptions may be exhausted.
This commit fixes the two issues above, so as needed a subscription can
be deleted correctly.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Upon receipt of a service subscription request from user via a topology
connection, one 'sub' object will be allocated in kernel, so it will be
able to send an event of the service if any to the user correspondingly
then. Also, in case of any failure, the connection will be shutdown and
all the pertaining 'sub' objects will be freed.
However, there is a race condition as follows resulting in memory leak:
receive-work connection send-work
| | |
sub-1 |<------//-------| |
sub-2 |<------//-------| |
| |<---------------| evt for sub-x
sub-3 |<------//-------| |
: : :
: : :
| /--------| |
| | * peer closed |
| | | |
| | |<-------X-------| evt for sub-y
| | |<===============|
sub-n |<------/ X shutdown |
-> orphan | |
That is, the 'receive-work' may get the last subscription request while
the 'send-work' is shutting down the connection due to peer close.
We had a 'lock' on the connection, so the two actions cannot be carried
out simultaneously. If the last subscription is allocated e.g. 'sub-n',
before the 'send-work' closes the connection, there will be no issue at
all, the 'sub' objects will be freed. In contrast the last subscription
will become orphan since the connection was closed, and we released all
references.
This commit fixes the issue by simply adding one test if the connection
remains in 'connected' state right after we obtain the connection lock,
then a subscription object can be created as usual, otherwise we ignore
it.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Reported-by: Thang Ngo <thang.h.ngo@dektech.com.au>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when a connection is in Nagle mode, we set the 'ack_required'
bit in the last sending buffer and wait for the corresponding ACK prior
to pushing more data. However, on the receiving side, the ACK is issued
only when application really reads the whole data. Even if part of the
last buffer is received, we will not do the ACK as required. This might
cause an unnecessary delay since the receiver does not always fetch the
message as fast as the sender, resulting in a large latency in the user
message sending, which is: [one RTT + the receiver processing time].
The commit makes Nagle ACK as soon as possible i.e. when a message with
the 'ack_required' arrives in the receiving side's stack even before it
is processed or put in the socket receive queue...
This way, we can limit the streaming latency to one RTT as committed in
Nagle mode.
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ursula Braun says:
====================
s390/net: updates 2020-05-13
please apply the fix from Wei Yongjun to netdev's net tree and
add Karsten Graul as co-maintainer for drivers/s390/net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Karsten as additional maintainer for drivers/s390/net .
One of his focal points is the ism driver.
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Acked-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return negative error code -ENOMEM from the smcd_alloc_dev()
error handling case instead of 0, as done elsewhere in this function.
Fixes: 684b89bc39 ("s390/ism: add device driver for internal shared memory")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When tsi-as-adc is configured it is possible for in7[0123]_input read to
return an incorrect value if a concurrent read to in[456]_input is
performed. This is caused by a concurrent manipulation of the mux
channel without proper locking as hwmon and mfd use different locks for
synchronization.
Switch hwmon to use the same lock as mfd when accessing the TSI channel.
Fixes: 4f16cab19a ("hwmon: da9052: Add support for TSI channel")
Signed-off-by: Samu Nuutamo <samu.nuutamo@vincit.fi>
[rebase to current master, reword commit message slightly]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The format of temperature limitation registers are 8-bit 2's complement
and the range is -128~127.
Converts the reading value to signed char to fix the incorrect range
of temperature limitation registers.
Signed-off-by: Amy Shih <amy.shih@advantech.com.tw>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When nct7904 power up, it compares current sensor readings against the
default threshold immediately. This results in false alarms on startup.
Read all SMI status registers in probe function to clear the alarms.
Signed-off-by: Amy Shih <amy.shih@advantech.com.tw>
[groeck: Reworded description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
pm_resump api did not handle drm_mode_config_helper_resume error.
This change add handle to return drm_mode_config_helper_resume`s
error number. This code logic is aligned with api pm_suspend.
After this change, the code maybe a bit readable.
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428131747.2099-1-bernard@vivo.com
The cipso and calipso code can set the MLS_CAT attribute on
successful parsing, even if the corresponding catmap has
not been allocated, as per current configuration and external
input.
Later, selinux code tries to access the catmap if the MLS_CAT flag
is present via netlbl_catmap_getlong(). That may cause null ptr
dereference while processing incoming network traffic.
Address the issue setting the MLS_CAT flag only if the catmap is
really allocated. Additionally let netlbl_catmap_getlong() cope
with NULL catmap.
Reported-by: Matthew Sheets <matthew.sheets@gd-ms.com>
Fixes: 4b8feff251 ("netlabel: fix the horribly broken catmap functions")
Fixes: ceba1832b1 ("calipso: Set the calipso socket label to match the secattr.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HUGETLBFS only used when MMU enabled, add the dependency.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
DEBUG_VIRTUAL should only used when MMU enabled, add the dependence.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Some drivers use PAGE_SHARED, pgprot_writecombine()/pgprot_device(),
add the defination to fix build error if NOMMU.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Drop static declaration to fix following build error if FRAME_POINTER disabled,
riscv64-linux-ld: arch/riscv/kernel/perf_callchain.o: in function `.L0':
perf_callchain.c:(.text+0x2b8): undefined reference to `walk_stackframe'
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Booting one of my machines, it triggered the following crash:
Kernel/User page tables isolation: enabled
ftrace: allocating 36577 entries in 143 pages
Starting tracer 'function'
BUG: unable to handle page fault for address: ffffffffa000005c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD 2014067 P4D 2014067 PUD 2015063 PMD 7b253067 PTE 7b252061
Oops: 0003 [#1] PREEMPT SMP PTI
CPU: 0 PID: 0 Comm: swapper Not tainted 5.4.0-test+ #24
Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
RIP: 0010:text_poke_early+0x4a/0x58
Code: 34 24 48 89 54 24 08 e8 bf 72 0b 00 48 8b 34 24 48 8b 4c 24 08 84 c0 74 0b 48 89 df f3 a4 48 83 c4 10 5b c3 9c 58 fa 48 89 df <f3> a4 50 9d 48 83 c4 10 5b e9 d6 f9 ff ff
0 41 57 49
RSP: 0000:ffffffff82003d38 EFLAGS: 00010046
RAX: 0000000000000046 RBX: ffffffffa000005c RCX: 0000000000000005
RDX: 0000000000000005 RSI: ffffffff825b9a90 RDI: ffffffffa000005c
RBP: ffffffffa000005c R08: 0000000000000000 R09: ffffffff8206e6e0
R10: ffff88807b01f4c0 R11: ffffffff8176c106 R12: ffffffff8206e6e0
R13: ffffffff824f2440 R14: 0000000000000000 R15: ffffffff8206eac0
FS: 0000000000000000(0000) GS:ffff88807d400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa000005c CR3: 0000000002012000 CR4: 00000000000006b0
Call Trace:
text_poke_bp+0x27/0x64
? mutex_lock+0x36/0x5d
arch_ftrace_update_trampoline+0x287/0x2d5
? ftrace_replace_code+0x14b/0x160
? ftrace_update_ftrace_func+0x65/0x6c
__register_ftrace_function+0x6d/0x81
ftrace_startup+0x23/0xc1
register_ftrace_function+0x20/0x37
func_set_flag+0x59/0x77
__set_tracer_option.isra.19+0x20/0x3e
trace_set_options+0xd6/0x13e
apply_trace_boot_options+0x44/0x6d
register_tracer+0x19e/0x1ac
early_trace_init+0x21b/0x2c9
start_kernel+0x241/0x518
? load_ucode_intel_bsp+0x21/0x52
secondary_startup_64+0xa4/0xb0
I was able to trigger it on other machines, when I added to the kernel
command line of both "ftrace=function" and "trace_options=func_stack_trace".
The cause is the "ftrace=function" would register the function tracer
and create a trampoline, and it will set it as executable and
read-only. Then the "trace_options=func_stack_trace" would then update
the same trampoline to include the stack tracer version of the function
tracer. But since the trampoline already exists, it updates it with
text_poke_bp(). The problem is that text_poke_bp() called while
system_state == SYSTEM_BOOTING, it will simply do a memcpy() and not
the page mapping, as it would think that the text is still read-write.
But in this case it is not, and we take a fault and crash.
Instead, lets keep the ftrace trampolines read-write during boot up,
and then when the kernel executable text is set to read-only, the
ftrace trampolines get set to read-only as well.
Link: https://lkml.kernel.org/r/20200430202147.4dc6e2de@oasis.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable@vger.kernel.org
Fixes: 768ae4406a ("x86/ftrace: Use text_poke()")
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When multiple async FDs were allowed to exist the idea was for all
broadcast events to be delivered to all async FDs, however
IB_EVENT_DEVICE_FATAL was missed.
Instead of having ib_uverbs_free_hw_resources() special case the global
async_fd, have it cause the event during the uobject destruction. Every
async fd is now a uobject so simply generate the IB_EVENT_DEVICE_FATAL
while destroying the async fd uobject. This ensures every async FD gets a
copy of the event.
Fixes: d680e88e20 ("RDMA/core: Add UVERBS_METHOD_ASYNC_EVENT_ALLOC")
Link: https://lore.kernel.org/r/20200507063348.98713-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The commit below moved all of the destruction to the disassociate step and
cleaned up the event channel during destroy_uobj.
However, when ib_uverbs_free_hw_resources() pushes IB_EVENT_DEVICE_FATAL
and then immediately goes to destroy all uobjects this causes
ib_uverbs_free_event_queue() to discard the queued event if userspace
hasn't already read() it.
Unlike all other event queues async FD needs to defer the
ib_uverbs_free_event_queue() until FD release. This still unregisters the
handler from the IB device during disassociation.
Fixes: 3e032c0e92 ("RDMA/core: Make ib_uverbs_async_event_file into a uobject")
Link: https://lore.kernel.org/r/20200507063348.98713-2-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
We autotune rcvbuf whenever SO_RCVLOWAT is set to account for 100%
overhead in tcp_set_rcvlowat()
This works well when skb->len/skb->truesize ratio is bigger than 0.5
But if we receive packets with small MSS, we can end up in a situation
where not enough bytes are available in the receive queue to satisfy
RCVLOWAT setting.
As our sk_rcvbuf limit is hit, we send zero windows in ACK packets,
preventing remote peer from sending more data.
Even autotuning does not help, because it only triggers at the time
user process drains the queue. If no EPOLLIN is generated, this
can not happen.
Note poll() has a similar issue, after commit
c7004482e8 ("tcp: Respect SO_RCVLOWAT in tcp_poll().")
Fixes: 03f45c883c ("tcp: avoid extra wakeups for SO_RCVLOWAT users")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
My recent commit b6d49cab44 ("net: Make PTP-specific drivers depend on
PTP_1588_CLOCK") exposes a missing dependency in defconfigs that select
TI_CPTS without selecting PTP_1588_CLOCK, leading to linker errors of the
form:
drivers/net/ethernet/ti/cpsw.o: in function `cpsw_ndo_stop':
cpsw.c:(.text+0x680): undefined reference to `cpts_unregister'
...
That's because TI_CPTS_MOD (which is the symbol gating the _compilation_ of
cpts.c) now depends on PTP_1588_CLOCK, and so is not enabled in these
configurations, but TI_CPTS (which is the symbol gating _calls_ to the cpts
functions) _is_ enabled. So we end up compiling calls to functions that
don't exist, resulting in the linker errors.
This patch fixes build errors and restores previous behavior by:
- ensure PTP_1588_CLOCK=y in TI specific configs and CPTS will be built
- remove TI_CPTS_MOD and, instead, add dependencies from CPTS in
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV as below:
config TI_CPSW_SWITCHDEV
...
depends on TI_CPTS || !TI_CPTS
which will ensure proper dependencies PTP_1588_CLOCK -> TI_CPTS ->
TI_CPSW/TI_KEYSTONE_NETCP/TI_CPSW_SWITCHDEV and build type selection.
Note. For NFS boot + CPTS all of above configs have to be built-in.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Fixes: b6d49cab44 ("net: Make PTP-specific drivers depend on PTP_1588_CLOCK")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Clay McClure <clay@daemons.net>
[grygorii.strashko@ti.com: rewording, add deps cpsw/netcp from cpts, drop IS_REACHABLE]
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shannon Nelson says:
====================
ionic fixes
These are a couple more fixes after more fw-upgrade testing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the fw has been re-inited, we need to refresh the port
information dma address so we can see fresh port information.
Let's call ionic_port_init again, and tweak it to allow for
a call to simply refresh the existing dma address.
Fixes: c672412f61 ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running in a bond setup, or some other potential
configurations, the netdev mac may have been changed from
the default device mac. Since the userland doesn't know
about the changes going on under the covers in a fw-upgrade
it doesn't know the re-push the mac filter. The driver
needs to leave the netdev mac filter alone when rebuilding
after the fw-upgrade.
Fixes: c672412f61 ("ionic: remove lifs on fw reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
The do_aux_work callback had documentation in the structure comment
which referred to it as "do_work".
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the other MPTCP-peer uses 32-bit data-sequence numbers, we rely on
map_seq to indicate how to expand to a 64-bit data-sequence number in
expand_seq() when receiving data.
For new subflows, this field is not initialized, thus results in an
"invalid" mapping being discarded.
Fix this by initializing map_seq upon subflow establishment time.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unfortunately, the last set of fixes introduced some minor bugs:
- The bootconfig apply_xbc() leak fix caused the application to return
a positive number on success, when it should have returned zero.
- The preempt_irq_delay_thread fix to make the creation code
wait for the kthread to finish to prevent it from executing after
module unload, can now cause the kthread to exit before it even
executes (preventing it to run its tests).
- The fix to the bootconfig that fixed the initrd to remove the
bootconfig from causing the kernel to panic, now prints a warning
that the bootconfig is not found, even when bootconfig is not
on the command line.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXrq2ehQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrdjAQDGNaJa7Ft13KTDTNTioKmOorOi38vF
ava4E3uBHl3StQD/anJmVq7Kk4WJFKGYemV6usbjDqy510PCFu/VQ1AbGQc=
=hJvk
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Fixes to previous fixes.
Unfortunately, the last set of fixes introduced some minor bugs:
- The bootconfig apply_xbc() leak fix caused the application to
return a positive number on success, when it should have returned
zero.
- The preempt_irq_delay_thread fix to make the creation code wait for
the kthread to finish to prevent it from executing after module
unload, can now cause the kthread to exit before it even executes
(preventing it to run its tests).
- The fix to the bootconfig that fixed the initrd to remove the
bootconfig from causing the kernel to panic, now prints a warning
that the bootconfig is not found, even when bootconfig is not on
the command line"
* tag 'trace-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Fix to prevent warning message if no bootconfig option
tracing: Wait for preempt irq delay thread to execute
tools/bootconfig: Fix apply_xbc() to return zero on success
- Fix pin configuration in the PCA953x driver.
- Ruggedize the watch/unwatch ioctl().
- Possible call to a sleeping function when holding a spinlock,
avoid this.
- Fix UML builds with DT overlays.
- Mask Tegra GPIO IRQs during shutdown().
-----BEGIN PGP SIGNATURE-----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=U86d
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes for v5.7, slightly overdue. Been learning MMUs and
KASan that is why it's late. Bartosz helped me out, luckily!
- Fix pin configuration in the PCA953x driver
- Ruggedize the watch/unwatch ioctl()
- Possible call to a sleeping function when holding a spinlock, avoid
this
- Fix UML builds with DT overlays
- Mask Tegra GPIO IRQs during shutdown()"
* tag 'gpio-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: tegra: mask GPIO IRQs during IRQ shutdown
gpio: of: Build fails if CONFIG_OF_DYNAMIC enabled without CONFIG_OF_GPIO
gpiolib: don't call sleeping functions with a spinlock taken
gpiolib: improve the robustness of watch/unwatch ioctl()
gpio: pca953x: Fix pca953x_gpio_set_config
Fixes for bugs prior to v5.7-rc1:
- Fix random block reads when reading fragmented journals (v5.2).
- Fix a possible random memory access in gfs2_walk_metadata (v5.3).
Fixes for v5.7-rc1:
- Fix several overlooked gfs2_qa_get / gfs2_qa_put imbalances.
- Fix several bugs in the new filesystem withdraw logic.
-----BEGIN PGP SIGNATURE-----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=4Sbr
-----END PGP SIGNATURE-----
Merge tag 'gfs2-v5.7-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
"Various gfs2 fixes.
Fixes for bugs prior to v5.7:
- Fix random block reads when reading fragmented journals (v5.2)
- Fix a possible random memory access in gfs2_walk_metadata (v5.3)
Fixes for v5.7:
- Fix several overlooked gfs2_qa_get / gfs2_qa_put imbalances
- Fix several bugs in the new filesystem withdraw logic"
* tag 'gfs2-v5.7-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: Don't demote a glock until its revokes are written"
gfs2: If go_sync returns error, withdraw but skip invalidate
gfs2: Grab glock reference sooner in gfs2_add_revoke
gfs2: don't call quota_unhold if quotas are not locked
gfs2: move privileged user check to gfs2_quota_lock_check
gfs2: remove check for quotas on in gfs2_quota_check
gfs2: Change BUG_ON to an assert_withdraw in gfs2_quota_change
gfs2: Fix problems regarding gfs2_qa_get and _put
gfs2: More gfs2_find_jhead fixes
gfs2: Another gfs2_walk_metadata fix
gfs2: Fix use-after-free in gfs2_logd after withdraw
gfs2: Fix BUG during unmount after file system withdraw
gfs2: Fix error exit in do_xmote
gfs2: fix withdraw sequence deadlock
While reading the TCB field in t4_tcb_get_field32() the wrong mask is
passed as a parameter which leads the driver eventually to a kernel
panic/app segfault from access to an illegal SRQ index while flushing the
SRQ completions during connection teardown.
Fixes: 11a27e2121 ("iw_cxgb4: complete the cached SRQ buffers")
Link: https://lore.kernel.org/r/20200511185608.5202-1-bharat@chelsio.com
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Do not decrease the reference count of resource tracker object twice in
the error flow of res_get_common_doit.
Fixes: c5dfe0ea6f ("RDMA/nldev: Add resource tracker doit callback")
Link: https://lore.kernel.org/r/20200507062942.98305-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The IB core pkey cache is populated by procedure ib_cache_update().
Initially, the pkey cache pointer is NULL. ib_cache_update allocates a
buffer and populates it with the device's pkeys, via repeated calls to
procedure ib_query_pkey().
If there is a failure in populating the pkey buffer via ib_query_pkey(),
ib_cache_update does not replace the old pkey buffer cache with the
updated one -- it leaves the old cache as is.
Since initially the pkey buffer cache is NULL, when calling
ib_cache_update the first time, a failure in ib_query_pkey() will cause
the pkey buffer cache pointer to remain NULL.
In this situation, any calls subsequent to ib_get_cached_pkey(),
ib_find_cached_pkey(), or ib_find_cached_pkey_exact() will try to
dereference the NULL pkey cache pointer, causing a kernel panic.
Fix this by checking the ib_cache_update() return value.
Fixes: 8faea9fd4a ("RDMA/cache: Move the cache per-port data into the main ib_port_data")
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/r/20200507071012.100594-1-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The commit noted below fixed a case where a pq is left on the sdma wait
list.
It however missed another case.
user_sdma_send_pkts() has two calls from hfi1_user_sdma_process_request().
If the first one fails as indicated by -EBUSY, the pq will be placed on
the waitlist as by design.
If the second call then succeeds, the pq is still on the waitlist setting
up a race with the interrupt handler if a subsequent request uses a
different SDMA engine
Fix by deleting the first call.
The use of pcount and the intent to send a short burst of packets followed
by the larger balance of packets was never correctly implemented, because
the two calls always send pcount packets no matter what. A subsequent
patch will correct that issue.
Fixes: 9a293d1e21 ("IB/hfi1: Ensure pq is not left on waitlist")
Link: https://lore.kernel.org/r/20200504130917.175613.43231.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Local variable netdev is not used in these calls.
It should be noted, that this change is required to work in bonded mode.
Otherwise we would get the following assert:
"RTNL: assertion failed at net/core/dev.c (5665)"
With the calltrace as follows:
dump_stack+0x19/0x1b
netdev_master_upper_dev_get+0x61/0x70
i40iw_addr_resolve_neigh+0x1e8/0x220
i40iw_make_cm_node+0x296/0x700
? i40iw_find_listener.isra.10+0xcc/0x110
i40iw_receive_ilq+0x3d4/0x810
i40iw_puda_poll_completion+0x341/0x420
i40iw_process_ceq+0xa5/0x280
i40iw_ceq_dpc+0x1e/0x40
tasklet_action+0x83/0x140
__do_softirq+0x125/0x2bb
call_softirq+0x1c/0x30
do_softirq+0x65/0xa0
irq_exit+0x105/0x110
do_IRQ+0x56/0xf0
common_interrupt+0x16a/0x16a
? cpuidle_enter_state+0x57/0xd0
cpuidle_idle_call+0xde/0x230
arch_cpu_idle+0xe/0xc0
cpu_startup_entry+0x14a/0x1e0
start_secondary+0x1f7/0x270
start_cpu+0x5/0x14
Link: https://lore.kernel.org/r/20200428131511.11049-1-den@openvz.org
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In the mlx4_ib_post_send() flow, some functions call ib_get_cached_pkey()
without checking its return value. If ib_get_cached_pkey() returns an
error code, these functions should return failure.
Fixes: 1ffeb2eb8b ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Fixes: 225c7b1fee ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters")
Fixes: e622f2f4ad ("IB: split struct ib_send_wr")
Link: https://lore.kernel.org/r/20200426075921.130074-1-leon@kernel.org
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The commit below modified rxe_create_mmap_info() to return ERR_PTR's but
didn't update the callers to handle them. Modify rxe_create_mmap_info() to
only return ERR_PTR and fix all error checking after
rxe_create_mmap_info() is called.
Ensure that all other exit paths properly set the error return.
Fixes: ff23dfa134 ("IB: Pass only ib_udata in function prototypes")
Link: https://lore.kernel.org/r/20200425233545.17210-1-sudipm.mukherjee@gmail.com
Link: https://lore.kernel.org/r/20200511183742.GB225608@mwanda
Cc: stable@vger.kernel.org [5.4+]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Commit de462e5f10 ("bootconfig: Fix to remove bootconfig
data from initrd while boot") causes a cosmetic regression
on dmesg, which warns "no bootconfig data" message without
bootconfig cmdline option.
Fix setup_boot_config() by moving no bootconfig check after
commandline option check.
Link: http://lkml.kernel.org/r/9b1ba335-071d-c983-89a4-2677b522dcc8@molgen.mpg.de
Link: http://lkml.kernel.org/r/158916116468.21787.14558782332170588206.stgit@devnote2
Fixes: de462e5f10 ("bootconfig: Fix to remove bootconfig data from initrd while boot")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
[Why]
For MST case: when update_config is called to disable a stream,
this clears the settings for all the streams on that link.
We should only clear the settings for the stream that was disabled.
[How]
Clear the settings after the call to remove display is called.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On my raven1 system (rev c6) with VBIOS 113-RAVEN-114 GFXOFF is
not stable (resulting in large block tiling noise in some applications).
Disabling GFXOFF via the quirk list fixes the problems for me.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Expired intervals would still match and be dumped to user space until
garbage collection wiped them out. Make sure they stop matching and
disappear (from users' perspective) as soon as they expire.
Fixes: 8d8540c4f5 ("netfilter: nft_set_rbtree: add timeout support")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If the flow timer expires, the gc sets on the NF_FLOW_TEARDOWN flag.
Otherwise, the flowtable software path might race to refresh the
timeout, leaving the state machine in inconsistent state.
Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ASUS ZenBook UX431DA requires an additional COEF setup when booted
from the recent Windows 10, otherwise it produces the noisy output.
The quirk turns on COEF 0x1b bit 10 that has been cleared supposedly
due to the pop noise reduction.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207553
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20200512073203.14091-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS UX581LV laptop's audio (1043:19e1) with ALC295 can't detect the
headset microphone until ALC295_FIXUP_ASUS_MIC_NO_PRESENCE quirk
applied.
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Link: https://lore.kernel.org/r/20200512061525.133985-3-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Kefeng Wang
Heiner Kallweit
Chris Wilson
Florian Fainelli
David S. Miller
Tuong Lien
Ursula Braun
Wei Yongjun
Samu Nuutamo
Amy Shih
Bernard Zhao
Paolo Abeni
Steven Rostedt (VMware)
Jason Gunthorpe
Eric Dumazet
Clay McClure
Shannon Nelson
Jacob Keller
Christoph Paasch
Linus Torvalds
Potnuri Bharat Teja
Maor Gottlieb
Jack Morgenstein
Mike Marciniszyn
Denis V. Lunev
Sudip Mukherjee
Masami Hiramatsu
Leo (Hanghong) Ma
Tom St Denis
Phil Sutter
Pablo Neira Ayuso
Takashi Iwai
Rodrigo Vivi
Jian-Hong Pan