Граф коммитов

24 Коммитов

Автор SHA1 Сообщение Дата
Ben Widawsky 41907ddc1b drm/i915: Fix gen2 mappable calculations
When I refactored the code initially, I forgot that gen2 uses a
different bar for the CPU mappable aperture. The agp-less code knows
nothing of generations less than 5, so we have to expand the gtt_probe
function to include the mappable base and end.

It was originally broken by me:
commit baa09f5fd8
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Thu Jan 24 13:49:57 2013 -0800

    drm/i915: Add probe and remove to the gtt ops

Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-02-15 10:30:38 +01:00
Ben Widawsky a54c0c279f drm/i915: remove intel_gtt structure
With the probe call in our dispatch table, we can now cut away the
last three remaining members in the intel_gtt shared struct and so
remove it completely.

v2: Rebased on top of Daniel's series

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[danvet: bikeshed commit message a bit.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-31 11:50:07 +01:00
Ben Widawsky e5c6537779 agp/intel: Add gma_bus_addr
It is no longer used in the i915 code, so isolate it from the shared
struct.

This was originally part of:
commit 0e275518f325418d559c05327775bff894b237f7
Author: Ben Widawsky <ben@bwidawsk.net>
Date:   Mon Jan 14 13:35:33 2013 -0800

    agp/intel: decouple more of the agp-i915 sharing

    Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
    Signed-off-by: Ben Widawsky <ben@bwidawsk.net>

That commit had some other hunks which can't be used due to issues
Daniel found in previous commits.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: drop squash notice from the commit since it's imo ok to keep
this one separate.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 13:11:12 +01:00
Ben Widawsky 8d2e630899 drm/i915: Needs_dmar, not
The reasoning behind our code taking two paths depending upon whether or
not we may have been configured for IOMMU isn't clear to me. It should
always be safe to use the pci mapping functions as they are designed to
abstract the decision we were handling in i915.

Aside from simpler code, removing another member for the intel_gtt
struct is a nice motivation.

I ran this by Chris, and he wasn't concerned about the extra kzalloc,
and memory references vs. page_to_phys calculation in the case without
IOMMU.

v2: Update commit message

v3: Remove needs_dmar addition from Zhenyu upstream

This reverts (and then other stuff)
commit 20652097da
Author: Zhenyu Wang <zhenyuw@linux.intel.com>
Date:   Thu Dec 13 23:47:47 2012 +0800

    drm/i915: Fix missed needs_dmar setting

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v2)
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Squash in follow-up fix to remove the bogus hunk which
deleted the dma_mask configuration for gen6+.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 13:11:12 +01:00
Ben Widawsky 9c61a32d31 drm/i915: Remove scratch page from shared
We already had a mapping in both (minus the phys_addr in AGP).

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 13:11:11 +01:00
Ben Widawsky a81cc00c11 drm/i915: Cut out the infamous ILK w/a from AGP layer
And, move it to where the rest of the logic is.

There is some slight functionality changes. There was extra paranoid
checks in AGP code making sure we never do idle maps on gen2 parts. That
was not duplicated as the simple PCI id check should do the right thing.

v2: use IS_GEN5 && IS_MOBILE check instead. For now, this is the same as
IS_IRONLAKE_M but is more future proof. The workaround docs hint that
more than one platform may be effected, but we've never seen such a
platform in the wild. (Rodrigo, Daniel)

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v1)
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-01-20 13:11:11 +01:00
Ben Widawsky 06e5598fce drm/i915: Move GSM mapping into dev_priv
This removes an unused field from the AGP structure and moves it into
the dev_priv structure (with a slightly better name). This builds upon
the kill-agp series already merged.

GSM is a well defined term in the bspec:
GSM: Graphics Stolen Memory

GTT stolen space is defined for storage of the GFX GTT entries in
physical memory. IA can not access GSM directly , it can only access via
GTTMMADR. GT can access GSM directly or through GTTMMADR.

This is not the entire stolen space.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-20 16:28:42 +01:00
Ben Widawsky 009946f89b drm/i915: Kill off now unused gen6+ AGP code
v2: Accidently removed an ILK case in i9xx_setup (Nicely found by Chris)

CC: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by [v1] : Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-11 23:51:43 +01:00
Ben Widawsky e76e9aebcd drm/i915: Stop using AGP layer for GEN6+
As a quick hack we make the old intel_gtt structure mutable so we can
fool a bunch of the existing code which depends on elements in that data
structure. We can/should try to remove this in a subsequent patch.

This should preserve the old gtt init behavior which upon writing these
patches seems incorrect. The next patch will fix these things.

The one exception is VLV which doesn't have the preserved flush control
write behavior. Since we want to do that for all GEN6+ stuff, we'll
handle that in a later patch. Mainstream VLV support doesn't actually
exist yet anyway.

v2: Update the comment to remove the "voodoo"
Check that the last pte written matches what we readback

v3: actually kill cache_level_to_agp_type since most of the flags will
disappear in an upcoming patch

v4: v3 was actually not what we wanted (Daniel)
Make the ggtt bind assertions better and stricter (Chris)
Fix some uncaught errors at gtt init (Chris)
Some other random stuff that Chris wanted

v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben)

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a
tad more robust by mapping everything != CACHE_NONE to the cached agp
flag - we have a 1:1 uncached mapping, but different modes of
cacheable (at least on later generations). Suggested by Chris Wilson.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-11 23:51:42 +01:00
Chris Wilson 9da3da660d drm/i915: Replace the array of pages with a scatterlist
Rather than have multiple data structures for describing our page layout
in conjunction with the array of pages, we can migrate all users over to
a scatterlist.

One major advantage, other than unifying the page tracking structures,
this offers is that we replace the vmalloc'ed array (which can be up to
a megabyte in size) with a chain of individual pages which helps reduce
memory pressure.

The disadvantage is that we then do not have a simple array to iterate,
or to access randomly. The common case for this is in the relocation
processing, which will typically fit within a single scatterlist page
and so be almost the same cost as the simple array. For iterating over
the array, the extra function call could be optimised away, but in
reality is an insignificant cost of either binding the pages, or
performing the pwrite/pread.

v2: Fix drm_clflush_sg() to not invoke wbinvd as well! And fix the
trivial compile error from rebasing.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-20 14:22:57 +02:00
Daniel Vetter 8ecd1a6615 drm/i915: call intel_enable_gtt
When drm/i915 is in control of the gtt, we need to call
the enable function at all the relevant places ourselves.

Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-12 22:21:07 +02:00
Daniel Vetter 14be93ddff drm/i915 + agp/intel-gtt: prep work for direct setup
To be able to directly set up the intel-gtt code from drm/i915 and
avoid setting up the fake-agp driver we need to prepare a few things:
- pass both the bridge and gpu pci_dev to the probe function and add
  code to handle the gpu pdev both being present (for drm/i915) and
  not present (fake agp).
- add refcounting to the remove function so that unloading drm/i915
  doesn't kill the fake agp driver

v2: Fix up the cleanup and refcount, noticed by Jani Nikula.

Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-12 22:19:49 +02:00
Daniel Vetter dd2757f8b5 drm/i915: stop using dev->agp->base
For that to work we need to export the base address of the gtt
mmio window from intel-gtt. Also replace all other uses of
dev->agp by values we already have at hand.

Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-12 22:18:06 +02:00
Daniel Vetter 650dc07ec3 drm/i915: disable ppgtt on snb when dmar is enabled
Totally unexpected that this regressed. Luckily it sounds like we just
need to have dmar disable on the igfx, not the entire system. At least
that's what a few days of testing between Tony Vroon and me indicates.

Reported-by: Tony Vroon <tony@linx.net>
Cc: Tony Vroon <tony@linx.net>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43024
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-04-02 15:59:07 +02:00
Daniel Vetter 428ccb21b7 agp/intel-gtt: export the gtt pagetable iomapping
We need this because ppgtt page directory entries need to be in the
global gtt pagetable.

Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-09 21:24:18 +01:00
Daniel Vetter 50a4c4a94d agp/intel-gtt: export the scratch page dma address
To implement a PPGTT for drm/i915 that fully aliases the GTT, we also
need to properly alias the scratch page.

Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-02-09 21:23:18 +01:00
Ben Widawsky 5c0422878f drm/i915: ILK + VT-d workaround
Idle the GPU before doing any unmaps. We know if VT-d is in use through
an exported variable from iommu code.

This should avoid a known HW issue.

Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
2011-10-20 15:26:39 -07:00
Daniel Vetter 4080775b60 intel-gtt: export api for drm/i915
Just some minor shuffling to get rid of any agp traces in the
exported functions.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-23 20:14:47 +00:00
Daniel Vetter 40ce657510 drm/i915/gtt: call chipset flush directly
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-23 20:14:44 +00:00
Daniel Vetter 23ed992a5e drm/i915|intel-gtt: consolidate intel-gtt.h headers
... and a few other defines.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-23 20:14:43 +00:00
Chris Wilson c64f7ba5f1 agp/intel: Remove confusion of stolen entries not stolen memory
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-11-23 15:43:18 +00:00
Daniel Vetter 0af9e92e77 intel-gtt: clean up gtt size reporting
Consolidate everything in intel-gtt.c and also kill the export
of intel_max_stolen.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-21 11:40:06 +01:00
Daniel Vetter 1996675432 drm/i915: die, i915_probe_agp, die
Use the detection from intel-gtt.ko instead. Hooray!

Also move the stolen mem allocator to the other gtt stuff in dev_prv->mem.

v2: Chris Wilson noted that my error handling was crap. Fix it. He also
said that this fixes a problem on his i845. Indeed, i915_probe_agp
misses a special case for i830/i845 stolen mem detection.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=25476
Cc: stable@kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 21:20:21 +01:00
Daniel Vetter 0ade638655 intel-gtt: introduce drm/intel-gtt.h
Add a few definitions to it that are already shared and that will
be shared in the future (like the number of stolen entries).
No functional changes in here.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-09-08 21:20:07 +01:00