Граф коммитов

212 Коммитов

Автор SHA1 Сообщение Дата
Will Deacon 887e2cff0f perf: arm-cmn: Fix conversion specifiers for node type
The node type field is an enum type, so print it as a 32-bit quantity
rather than as an unsigned short.

Link: https://lore.kernel.org/r/202009302350.QIzfkx62-lkp@intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-10-01 22:30:07 +01:00
Will Deacon d9ef632fab perf: arm-cmn: Fix unsigned comparison to less than zero
Ensure that the 'irq' field of 'struct arm_cmn_dtc' is a signed int
so that it can be compared '< 0'.

Link: https://lore.kernel.org/r/20200929170835.GA15956@embeddedor
Addresses-Coverity-ID: 1497488 ("Unsigned compared against 0")
Fixes: 0ba64770a2 ("perf: Add Arm CMN-600 PMU driver")
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
2020-10-01 22:29:53 +01:00
Julien Thierry d8f6267f7c arm_pmu: arm64: Use NMIs for PMU
Add required PMU interrupt operations for NMIs. Request interrupt lines as
NMIs when possible, otherwise fall back to normal interrupts.

NMIs are only supported on the arm64 architecture with a GICv3 irqchip.

[Alexandru E.: Added that NMIs only work on arm64 + GICv3, print message
	when PMU is using NMIs]

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org> (Developerbox)
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200924110706.254996-8-alexandru.elisei@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-28 19:00:17 +01:00
Julien Thierry f76b130bdb arm_pmu: Introduce pmu_irq_ops
Currently the PMU interrupt can either be a normal irq or a percpu irq.
Supporting NMI will introduce two cases for each existing one. It becomes
a mess of 'if's when managing the interrupt.

Define sets of callbacks for operations commonly done on the interrupt. The
appropriate set of callbacks is selected at interrupt request time and
simplifies interrupt enabling/disabling and freeing.

Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Tested-by: Sumit Garg <sumit.garg@linaro.org> (Developerbox)
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20200924110706.254996-7-alexandru.elisei@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-28 19:00:17 +01:00
Robin Murphy 0ba64770a2 perf: Add Arm CMN-600 PMU driver
Initial driver for PMU event counting on the Arm CMN-600 interconnect.
CMN sports an obnoxiously complex distributed PMU system as part of
its debug and trace features, which can do all manner of things like
sampling, cross-triggering and generating CoreSight trace. This driver
covers the PMU functionality, plus the relevant aspects of watchpoints
for simply counting matching flits.

Tested-by: Tsahi Zidenberg <tsahee@amazon.com>
Tested-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-28 18:50:20 +01:00
Mark Salter 688494a407 drivers/perf: thunderx2_pmu: Fix memory resource error handling
In tx2_uncore_pmu_init_dev(), a call to acpi_dev_get_resources() is used
to create a list _CRS resources which is searched for the device base
address. There is an error check following this:

   if (!rentry->res)
           return NULL

In no case, will rentry->res be NULL, so the test is useless. Even
if the test worked, it comes before the resource list memory is
freed. None of this really matters as long as the ACPI table has
the memory resource. Let's clean it up so that it makes sense and
will give a meaningful error should firmware leave out the memory
resource.

Fixes: 69c32972d5 ("drivers/perf: Add Cavium ThunderX2 SoC UNCORE PMU driver")
Signed-off-by: Mark Salter <msalter@redhat.com>
Link: https://lore.kernel.org/r/20200915204110.326138-2-msalter@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-18 14:34:51 +01:00
Mark Salter a76b8236ed drivers/perf: xgene_pmu: Fix uninitialized resource struct
This splat was reported on newer Fedora kernels booting on certain
X-gene based machines:

 xgene-pmu APMC0D83:00: X-Gene PMU version 3
 Unable to handle kernel read from unreadable memory at virtual \
 address 0000000000004006
 ...
 Call trace:
  string+0x50/0x100
  vsnprintf+0x160/0x750
  devm_kvasprintf+0x5c/0xb4
  devm_kasprintf+0x54/0x60
  __devm_ioremap_resource+0xdc/0x1a0
  devm_ioremap_resource+0x14/0x20
  acpi_get_pmu_hw_inf.isra.0+0x84/0x15c
  acpi_pmu_dev_add+0xbc/0x21c
  acpi_ns_walk_namespace+0x16c/0x1e4
  acpi_walk_namespace+0xb4/0xfc
  xgene_pmu_probe_pmu_dev+0x7c/0xe0
  xgene_pmu_probe.part.0+0x2c0/0x310
  xgene_pmu_probe+0x54/0x64
  platform_drv_probe+0x60/0xb4
  really_probe+0xe8/0x4a0
  driver_probe_device+0xe4/0x100
  device_driver_attach+0xcc/0xd4
  __driver_attach+0xb0/0x17c
  bus_for_each_dev+0x6c/0xb0
  driver_attach+0x30/0x40
  bus_add_driver+0x154/0x250
  driver_register+0x84/0x140
  __platform_driver_register+0x54/0x60
  xgene_pmu_driver_init+0x28/0x34
  do_one_initcall+0x40/0x204
  do_initcalls+0x104/0x144
  kernel_init_freeable+0x198/0x210
  kernel_init+0x20/0x12c
  ret_from_fork+0x10/0x18
 Code: 91000400 110004e1 eb08009f 540000c0 (38646846)
 ---[ end trace f08c10566496a703 ]---

This is due to use of an uninitialized local resource struct in the xgene
pmu driver. The thunderx2_pmu driver avoids this by using the resource list
constructed by acpi_dev_get_resources() rather than using a callback from
that function. The callback in the xgene driver didn't fully initialize
the resource. So get rid of the callback and search the resource list as
done by thunderx2.

Fixes: 832c927d11 ("perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver")
Signed-off-by: Mark Salter <msalter@redhat.com>
Link: https://lore.kernel.org/r/20200915204110.326138-1-msalter@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-18 14:34:51 +01:00
Tuan Phan 2b694fc92a perf: arm_dsu: Support DSU ACPI devices
Add support for probing device from ACPI node.
Each DSU ACPI node and its associated cpus are inside a cluster node.

Signed-off-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1600106656-9542-1-git-send-email-tuanphan@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-15 15:51:42 +01:00
Shaokun Zhang d51eb416fa drivers/perf: hisi: Add missing include of linux/module.h
MODULE_*** is used in HiSilicon uncore PMU drivers and is provided by
linux/module.h, but the header file is not directly included. Add the
missing include.

Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1599186097-18599-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-09-07 14:05:11 +01:00
Gustavo A. R. Silva df561f6688 treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
Linus Torvalds 30185b69a2 It looks like a smaller batch of clk updates this time around. In the core
framework we just have some minor tweaks and a debugfs feature, so not much to
 see there. The driver updates are fairly well split between AT91 and Qualcomm
 clk support. Adding those two drivers together equals about 50% of the
 diffstat. Otherwise, the big amount of work this time was on supporting
 Broadcom's Raspberry Pi firmware clks. See below for some more highlights.
 
 Core:
  - Document clk_hw_round_rate() so it gets some more use
  - Remove unused __clk_get_flags()
  - Add a prepare/enable debugfs feature similar to rate setting
 
 New Drivers:
  - Add support for SAMA7G5 SoC clks
  - Enable CPU clks on Qualcomm IPQ6018 SoCs
  - Enable CPU clks on Qualcomm MSM8996 SoCs
  - GPU clk support for Qualcomm SM8150 and SM8250 SoCs
  - Audio clks on Qualcomm SC7180 SoCs
  - Microchip Sparx5 DPLL clk
  - Add support for the new Renesas RZ/G2H (R8A774E1) SoC
 
 Updates:
  - Make defines for bcm63xx-gate clks to use in DT
  - Support BCM2711 SoC firmware clks
  - Add HDMI clks for BCM2711 SoCs
  - Add RTC related clks on Ingenic SoCs
  - Support USB PHY clks on Ingenic SoCs
  - Support gate clks on BCM6318 SoCs
  - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
  - Use poll_timeout functions in Rockchip clk driver
  - Support Rockchip rk3288w SoC variant
  - Mark mac_lbtest critical on Rockchip rk3188
  - Add CAAM clock support for i.MX vf610 driver
  - Add MU root clock support for i.MX imx8mp driver
  - Amlogic g12: add neural network accelerator clock sources
  - Amlogic meson8: remove critical flag for main PLL divider
  - Amlogic meson8: add video decoder clock gates
  - Convert one more Renesas DT binding to json-schema
  - Enhance critical clock handling on Renesas platforms to only consider
    clocks that were enabled at boot time
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl8tspERHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSX0og//TXp134IBXVZ2Z5Wca4J41itv7tPGJFsX
 EslQ/eMm6xhGEqqrA6BVsQ228JF9rUmg1fbvdl82UPK7Zyp9P2fo6CMC65ngDTky
 B1rLZOaKitER9JdL9DmmnIR772pI//rAMdIeVC/Jn5RR7OpP4lgY6+qvK0pJjVFl
 8aK3uHY+UWVFtqZxuJEAAyZBq1+bREqmVwNC1my6kmMIf0j0KwcGhrZgASWWtjQK
 4TRmroehLC4FBqnJ78Y3E6UAOBlz6C7XnP38qJge2672Ef7QhXZU7AGrGiTtxc4h
 5fB6MNMF+5QGel54qR1eH+JxaEoKsAjLaX1VBr7hAHrGIQ26dBFHFPsPvWDA+VVR
 4bwXJKz2objAWyqlMVM/cVV3q6uDixuScdrw2aAiojmV7ZvdZXflacdmZuS5v7e4
 sh86llN+lF0YrViYz33z+up0risCAi089xVo7Z99VgyLe2DR8TE+4/d6DQTFRNxl
 m66m6mlB9pPPgIV028SAf/zmzyoVWEarwdEAQPjJC6KVRbnR9mFlhSiTQMmCsSvU
 zHRxVcInc+8qIJY6VJ552UFu/JAan/AFl5knb+kW21a7hM8p81H9HuSnS4aHDDq4
 yETPU3XSMYz8ARHX4lKo1UIB6+k9iF2CWdCP+gXHNP+QYSAsRBIJsonjul9lLUCi
 8i6mUGkS0OU=
 =QLRg
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "It looks like a smaller batch of clk updates this time around.

  In the core framework we just have some minor tweaks and a debugfs
  feature, so not much to see there. The driver updates are fairly well
  split between AT91 and Qualcomm clk support. Adding those two drivers
  together equals about 50% of the diffstat.

  Otherwise, the big amount of work this time was on supporting
  Broadcom's Raspberry Pi firmware clks.

  Highlights:

  Core:
   - Document clk_hw_round_rate() so it gets some more use
   - Remove unused __clk_get_flags()
   - Add a prepare/enable debugfs feature similar to rate setting

  New Drivers:
   - Add support for SAMA7G5 SoC clks
   - Enable CPU clks on Qualcomm IPQ6018 SoCs
   - Enable CPU clks on Qualcomm MSM8996 SoCs
   - GPU clk support for Qualcomm SM8150 and SM8250 SoCs
   - Audio clks on Qualcomm SC7180 SoCs
   - Microchip Sparx5 DPLL clk
   - Add support for the new Renesas RZ/G2H (R8A774E1) SoC

  Updates:
   - Make defines for bcm63xx-gate clks to use in DT
   - Support BCM2711 SoC firmware clks
   - Add HDMI clks for BCM2711 SoCs
   - Add RTC related clks on Ingenic SoCs
   - Support USB PHY clks on Ingenic SoCs
   - Support gate clks on BCM6318 SoCs
   - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs
   - Use poll_timeout functions in Rockchip clk driver
   - Support Rockchip rk3288w SoC variant
   - Mark mac_lbtest critical on Rockchip rk3188
   - Add CAAM clock support for i.MX vf610 driver
   - Add MU root clock support for i.MX imx8mp driver
   - Amlogic g12: add neural network accelerator clock sources
   - Amlogic meson8: remove critical flag for main PLL divider
   - Amlogic meson8: add video decoder clock gates
   - Convert one more Renesas DT binding to json-schema
   - Enhance critical clock handling on Renesas platforms to only
     consider clocks that were enabled at boot time"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits)
  clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845
  ipq806x: gcc: add support for child probe
  clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static
  clk: qcom: ipq8074: Add correct index for PCIe clocks
  clk: <linux/clk-provider.h>: drop a duplicated word
  clk: renesas: cpg-mssr: Add r8a774e1 support
  dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1
  clk: Drop duplicate selection in Kconfig
  clk: qcom: smd: Add support for MSM8992/4 rpm clocks
  clk: qcom: ipq8074: Add missing clocks for pcie
  dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe
  Replace HTTP links with HTTPS ones: Common CLK framework
  clk: qcom: Add CPU clock driver for msm8996
  dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996
  soc: qcom: Separate kryo l2 accessors from PMU driver
  clk: meson: meson8b: add the vclk2_en gate clock
  clk: meson: meson8b: add the vclk_en gate clock
  clk: qcom: Fix return value check in apss_ipq6018_probe()
  clk: bcm: dvp: Add missing module informations
  clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2
  ...
2020-08-07 13:35:51 -07:00
Linus Torvalds 145ff1ec09 arm64 and cross-arch updates for 5.9:
- Removal of the tremendously unpopular read_barrier_depends() barrier,
   which is a NOP on all architectures apart from Alpha, in favour of
   allowing architectures to override READ_ONCE() and do whatever dance
   they need to do to ensure address dependencies provide LOAD ->
   LOAD/STORE ordering. This work also offers a potential solution if
   compilers are shown to convert LOAD -> LOAD address dependencies into
   control dependencies (e.g. under LTO), as weakly ordered architectures
   will effectively be able to upgrade READ_ONCE() to smp_load_acquire().
   The latter case is not used yet, but will be discussed further at LPC.
 
 - Make the MSI/IOMMU input/output ID translation PCI agnostic, augment
   the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
   bus-specific parameter and apply the resulting changes to the device
   ID space provided by the Freescale FSL bus.
 
 - arm64 support for TLBI range operations and translation table level
   hints (part of the ARMv8.4 architecture version).
 
 - Time namespace support for arm64.
 
 - Export the virtual and physical address sizes in vmcoreinfo for
   makedumpfile and crash utilities.
 
 - CPU feature handling cleanups and checks for programmer errors
   (overlapping bit-fields).
 
 - ACPI updates for arm64: disallow AML accesses to EFI code regions and
   kernel memory.
 
 - perf updates for arm64.
 
 - Miscellaneous fixes and cleanups, most notably PLT counting
   optimisation for module loading, recordmcount fix to ignore
   relocations other than R_AARCH64_CALL26, CMA areas reserved for
   gigantic pages on 16K and 64K configurations.
 
 - Trivial typos, duplicate words.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl8oTcsACgkQa9axLQDI
 XvEj6hAAkn39mO5xrR/Vhpg3DyFPk63ZlMSX9SsOeVyaLbovT6stTs1XAZXPpnkt
 rV3gwACyGSrqH6+uey9pHgHJuPF2TdrGEVK08yVKo9KGW/6yXSIncdKFE4jUJ/WJ
 wF5j7eMET2aGzcpm5AlzMmq6HOrKB8nZac9H8/x6H+Ox2WdgJkEjOkDvyqACUyum
 N3FsTZkWj2pIkTXHNgDZ8KjxVLO8HlFaB2hkxFDl9NPlX2UTCQJ8Tg1KiPLafKaK
 gUvH4usQDFdb5RU/UWogre37J4emO0ZTApZOyju+U+PMMWlWVHjZ4isUIS9zz/AE
 JNZ23dnKZX2HrYa5p8HZx175zwj/vXUqUHCZPLvQXaAudCEhF8BVljPiG0e80FV5
 GHFUgUbylKspp01I/9L+2JvsG96Mr0e+P3Sx7L2HTI42cmtoSa14+MpoSRj7zlft
 Qcl8hfrVOjCjUnFRHa/1y1cGvnD9GbgnKJR7zgVxl9bD/Jd48r1HUtwRORZCzWFr
 mRPVbPS72fWxMzMV9DZYJm02jJY9kLX2BMl49njbB8MhAhzOvrMVzoVVtMMeRFLR
 XHeJpmg36W09FiRGe7LRXlkXIhCQzQG2bJfiphuupCfhjRAitPoq8I925G6Pig60
 c8RWaXGU7PrEsdMNrL83vekvGKgqrkoFkRVtsCoQ2X6Hvu/XdYI=
 =mh79
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 and cross-arch updates from Catalin Marinas:
 "Here's a slightly wider-spread set of updates for 5.9.

  Going outside the usual arch/arm64/ area is the removal of
  read_barrier_depends() series from Will and the MSI/IOMMU ID
  translation series from Lorenzo.

  The notable arm64 updates include ARMv8.4 TLBI range operations and
  translation level hint, time namespace support, and perf.

  Summary:

   - Removal of the tremendously unpopular read_barrier_depends()
     barrier, which is a NOP on all architectures apart from Alpha, in
     favour of allowing architectures to override READ_ONCE() and do
     whatever dance they need to do to ensure address dependencies
     provide LOAD -> LOAD/STORE ordering.

     This work also offers a potential solution if compilers are shown
     to convert LOAD -> LOAD address dependencies into control
     dependencies (e.g. under LTO), as weakly ordered architectures will
     effectively be able to upgrade READ_ONCE() to smp_load_acquire().
     The latter case is not used yet, but will be discussed further at
     LPC.

   - Make the MSI/IOMMU input/output ID translation PCI agnostic,
     augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID
     bus-specific parameter and apply the resulting changes to the
     device ID space provided by the Freescale FSL bus.

   - arm64 support for TLBI range operations and translation table level
     hints (part of the ARMv8.4 architecture version).

   - Time namespace support for arm64.

   - Export the virtual and physical address sizes in vmcoreinfo for
     makedumpfile and crash utilities.

   - CPU feature handling cleanups and checks for programmer errors
     (overlapping bit-fields).

   - ACPI updates for arm64: disallow AML accesses to EFI code regions
     and kernel memory.

   - perf updates for arm64.

   - Miscellaneous fixes and cleanups, most notably PLT counting
     optimisation for module loading, recordmcount fix to ignore
     relocations other than R_AARCH64_CALL26, CMA areas reserved for
     gigantic pages on 16K and 64K configurations.

   - Trivial typos, duplicate words"

Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org
Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits)
  arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack
  arm64/mm: save memory access in check_and_switch_context() fast switch path
  arm64: sigcontext.h: delete duplicated word
  arm64: ptrace.h: delete duplicated word
  arm64: pgtable-hwdef.h: delete duplicated words
  bus: fsl-mc: Add ACPI support for fsl-mc
  bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver
  of/irq: Make of_msi_map_rid() PCI bus agnostic
  of/irq: make of_msi_map_get_device_domain() bus agnostic
  dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus
  of/device: Add input id to of_dma_configure()
  of/iommu: Make of_map_rid() PCI agnostic
  ACPI/IORT: Add an input ID to acpi_dma_configure()
  ACPI/IORT: Remove useless PCI bus walk
  ACPI/IORT: Make iort_msi_map_rid() PCI agnostic
  ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic
  ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC
  arm64: enable time namespace support
  arm64/vdso: Restrict splitting VVAR VMA
  arm64/vdso: Handle faults on timens page
  ...
2020-08-03 14:11:08 -07:00
Qi Liu f32ed8eb0e drivers/perf: Prevent forced unbinding of PMU drivers
Forcefully unbinding PMU drivers during perf sampling will lead to
a kernel panic, because the perf upper-layer framework call a NULL
pointer in this situation.

To solve this issue, "suppress_bind_attrs" should be set to true, so
that bind/unbind can be disabled via sysfs and prevent unbinding PMU
drivers during perf sampling.

Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1594975763-32966-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-07-17 10:51:44 +01:00
Qi Liu bdc5c744c7 drivers/perf: Fix kernel panic when rmmod PMU modules during perf sampling
When users try to remove PMU modules during perf sampling, kernel panic
will happen because the pmu->read() is a NULL pointer here.

INFO on HiSilicon hip08 platform as follow:
pc : hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu]
lr : hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu]
sp : ffff800010103e90
x29: ffff800010103e90 x28: ffff0027db0c0e40
x27: ffffa29a76f129d8 x26: ffffa29a77ceb000
x25: ffffa29a773a5000 x24: ffffa29a77392000
x23: ffffddffe5943f08 x22: ffff002784285960
x21: ffff002784285800 x20: ffff0027d2e76c80
x19: ffff0027842859e0 x18: ffff80003498bcc8
x17: ffffa29a76afe910 x16: ffffa29a7583f530
x15: 16151a1512061a1e x14: 0000000000000000
x13: ffffa29a76f1e238 x12: 0000000000000001
x11: 0000000000000400 x10: 00000000000009f0
x9 : ffff8000107b3e70 x8 : ffff0027db0c1890
x7 : ffffa29a773a7000 x6 : 00000007f5131013
x5 : 00000007f5131013 x4 : 09f257d417c00000
x3 : 00000002187bd7ce x2 : ffffa29a38f0f0d8
x1 : ffffa29a38eae268 x0 : ffff0027d2e76c80
Call trace:
hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu]
hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu]
__perf_event_read+0x1a0/0x1f8
flush_smp_call_function_queue+0xa0/0x160
generic_smp_call_function_single_interrupt+0x18/0x20
handle_IPI+0x31c/0x4dc
gic_handle_irq+0x2c8/0x310
el1_irq+0xcc/0x180
arch_cpu_idle+0x4c/0x20c
default_idle_call+0x20/0x30
do_idle+0x1b4/0x270
cpu_startup_entry+0x28/0x30
secondary_start_kernel+0x1a4/0x1fc

To solve the above issue, current module should be registered to kernel,
so that try_module_get() can be invoked when perf sampling starts. This
adds the reference counting of module and could prevent users from removing
modules during sampling.

Reported-by: Haifeng Wang <wang.wanghaifeng@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1594891165-8228-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-07-16 11:35:24 +01:00
Jay Chen f011856ce7 perf/smmuv3: To simplify code for ioremap page in pmcg
Use the devm_platform_get_and_ioremap_resource to simplify the code
a bit.

Signed-off-by: Jay Chen <jkchen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20200706112246.92220-2-jkchen@linux.alibaba.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-07-13 16:20:44 +01:00
Ilia Lin 6d0efeb14b soc: qcom: Separate kryo l2 accessors from PMU driver
The driver provides kernel level API for other drivers
to access the MSM8996 L2 cache registers.
Separating the L2 access code from the PMU driver and
making it public to allow other drivers use it.
The accesses must be separated with a single spinlock,
maintained in this driver.

Signed-off-by: Ilia Lin <ilialin@codeaurora.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-10 17:08:55 -07:00
Linus Torvalds 55d728b2b0 arm64 merge window fixes for -rc1
- Fix SCS debug check to report max stack usage in bytes as advertised
 - Fix typo: CONFIG_FTRACE_WITH_REGS => CONFIG_DYNAMIC_FTRACE_WITH_REGS
 - Fix incorrect mask in HiSilicon L3C perf PMU driver
 - Fix compat vDSO compilation under some toolchain configurations
 - Fix false UBSAN warning from ACPI IORT parsing code
 - Fix booting under bootloaders that ignore TEXT_OFFSET
 - Annotate debug initcall function with '__init'
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl7iMe8QHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNIp5B/46kdFZ1M8VSsGxtZMzLVZBR4MWzjx1wBD3
 Zzvcg5x0aLAvg+VephmQ5cBiQE78/KKISUdTKndevJ9feVhzz8kxbOhLB88o14+L
 Pk63p4jol8v7cJHiqcsBgSLR6MDAiY+4epsgeFA7WkO9cf529UIMO1ea2TCx0KbT
 tKniZghX5I485Fu2RHtZGLGBxQXqFBcDJUok3/IoZnp2SDyUxrzHPViFL9fHHzCb
 FNSEJijcoHfrIKiG4bPssKICmvbtcNysembDlJeyZ+5qJXqotty2M3OK+We7vPrg
 Ne5O/tQoeCt4lLuW40yEmpQzodNLG8D+isC6cFvspmPXSyHflSCz
 =EtmQ
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "arm64 fixes that came in during the merge window.

  There will probably be more to come, but it doesn't seem like it's
  worth me sitting on these in the meantime.

   - Fix SCS debug check to report max stack usage in bytes as advertised

   - Fix typo: CONFIG_FTRACE_WITH_REGS => CONFIG_DYNAMIC_FTRACE_WITH_REGS

   - Fix incorrect mask in HiSilicon L3C perf PMU driver

   - Fix compat vDSO compilation under some toolchain configurations

   - Fix false UBSAN warning from ACPI IORT parsing code

   - Fix booting under bootloaders that ignore TEXT_OFFSET

   - Annotate debug initcall function with '__init'"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: warn on incorrect placement of the kernel by the bootloader
  arm64: acpi: fix UBSAN warning
  arm64: vdso32: add CONFIG_THUMB2_COMPAT_VDSO
  drivers/perf: hisi: Fix wrong value for all counters enable
  arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS
  arm64: debug: mark a function as __init to save some memory
  scs: Report SCS usage in bytes rather than number of entries
2020-06-11 12:53:23 -07:00
Shaokun Zhang 961abd78ad drivers/perf: hisi: Fix wrong value for all counters enable
In L3C uncore PMU drivers, bit16 is used to control all counters enable &
disable. Wrong value is given in the driver and its default value is 1'b1,
it can work because each PMU counter has its own control bits too.
Let's fix the wrong value.

Fixes: 2940bc4333 ("perf: hisi: Add support for HiSilicon SoC L3C PMU driver")
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1591350221-32275-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-06-08 15:46:41 +01:00
Linus Torvalds 533b220f7b arm64 updates for 5.8
- Branch Target Identification (BTI)
 	* Support for ARMv8.5-BTI in both user- and kernel-space. This
 	  allows branch targets to limit the types of branch from which
 	  they can be called and additionally prevents branching to
 	  arbitrary code, although kernel support requires a very recent
 	  toolchain.
 
 	* Function annotation via SYM_FUNC_START() so that assembly
 	  functions are wrapped with the relevant "landing pad"
 	  instructions.
 
 	* BPF and vDSO updates to use the new instructions.
 
 	* Addition of a new HWCAP and exposure of BTI capability to
 	  userspace via ID register emulation, along with ELF loader
 	  support for the BTI feature in .note.gnu.property.
 
 	* Non-critical fixes to CFI unwind annotations in the sigreturn
 	  trampoline.
 
 - Shadow Call Stack (SCS)
 	* Support for Clang's Shadow Call Stack feature, which reserves
 	  platform register x18 to point at a separate stack for each
 	  task that holds only return addresses. This protects function
 	  return control flow from buffer overruns on the main stack.
 
 	* Save/restore of x18 across problematic boundaries (user-mode,
 	  hypervisor, EFI, suspend, etc).
 
 	* Core support for SCS, should other architectures want to use it
 	  too.
 
 	* SCS overflow checking on context-switch as part of the existing
 	  stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.
 
 - CPU feature detection
 	* Removed numerous "SANITY CHECK" errors when running on a system
 	  with mismatched AArch32 support at EL1. This is primarily a
 	  concern for KVM, which disabled support for 32-bit guests on
 	  such a system.
 
 	* Addition of new ID registers and fields as the architecture has
 	  been extended.
 
 - Perf and PMU drivers
 	* Minor fixes and cleanups to system PMU drivers.
 
 - Hardware errata
 	* Unify KVM workarounds for VHE and nVHE configurations.
 
 	* Sort vendor errata entries in Kconfig.
 
 - Secure Monitor Call Calling Convention (SMCCC)
 	* Update to the latest specification from Arm (v1.2).
 
 	* Allow PSCI code to query the SMCCC version.
 
 - Software Delegated Exception Interface (SDEI)
 	* Unexport a bunch of unused symbols.
 
 	* Minor fixes to handling of firmware data.
 
 - Pointer authentication
 	* Add support for dumping the kernel PAC mask in vmcoreinfo so
 	  that the stack can be unwound by tools such as kdump.
 
 	* Simplification of key initialisation during CPU bringup.
 
 - BPF backend
 	* Improve immediate generation for logical and add/sub
 	  instructions.
 
 - vDSO
 	- Minor fixes to the linker flags for consistency with other
 	  architectures and support for LLVM's unwinder.
 
 	- Clean up logic to initialise and map the vDSO into userspace.
 
 - ACPI
 	- Work around for an ambiguity in the IORT specification relating
 	  to the "num_ids" field.
 
 	- Support _DMA method for all named components rather than only
 	  PCIe root complexes.
 
 	- Minor other IORT-related fixes.
 
 - Miscellaneous
 	* Initialise debug traps early for KGDB and fix KDB cacheflushing
 	  deadlock.
 
 	* Minor tweaks to early boot state (documentation update, set
 	  TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).
 
 	* Refactoring and cleanup
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl7U9csQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNLBHCACs/YU4SM7Om5f+7QnxIKao5DBr2CnGGvdC
 yTfDghFDTLQVv3MufLlfno3yBe5G8sQpcZfcc+hewfcGoMzVZXu8s7LzH6VSn9T9
 jmT3KjDMrg0RjSHzyumJp2McyelTk0a4FiKArSIIKsJSXUyb1uPSgm7SvKVDwEwU
 JGDzL9IGilmq59GiXfDzGhTZgmC37QdwRoRxDuqtqWQe5CHoRXYexg87HwBKOQxx
 HgU9L7ehri4MRZfpyjaDrr6quJo3TVnAAKXNBh3mZAskVS9ZrfKpEH0kYWYuqybv
 znKyHRecl/rrGePV8RTMtrwnSdU26zMXE/omsVVauDfG9hqzqm+Q
 =w3qi
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "A sizeable pile of arm64 updates for 5.8.

  Summary below, but the big two features are support for Branch Target
  Identification and Clang's Shadow Call stack. The latter is currently
  arm64-only, but the high-level parts are all in core code so it could
  easily be adopted by other architectures pending toolchain support

  Branch Target Identification (BTI):

   - Support for ARMv8.5-BTI in both user- and kernel-space. This allows
     branch targets to limit the types of branch from which they can be
     called and additionally prevents branching to arbitrary code,
     although kernel support requires a very recent toolchain.

   - Function annotation via SYM_FUNC_START() so that assembly functions
     are wrapped with the relevant "landing pad" instructions.

   - BPF and vDSO updates to use the new instructions.

   - Addition of a new HWCAP and exposure of BTI capability to userspace
     via ID register emulation, along with ELF loader support for the
     BTI feature in .note.gnu.property.

   - Non-critical fixes to CFI unwind annotations in the sigreturn
     trampoline.

  Shadow Call Stack (SCS):

   - Support for Clang's Shadow Call Stack feature, which reserves
     platform register x18 to point at a separate stack for each task
     that holds only return addresses. This protects function return
     control flow from buffer overruns on the main stack.

   - Save/restore of x18 across problematic boundaries (user-mode,
     hypervisor, EFI, suspend, etc).

   - Core support for SCS, should other architectures want to use it
     too.

   - SCS overflow checking on context-switch as part of the existing
     stack limit check if CONFIG_SCHED_STACK_END_CHECK=y.

  CPU feature detection:

   - Removed numerous "SANITY CHECK" errors when running on a system
     with mismatched AArch32 support at EL1. This is primarily a concern
     for KVM, which disabled support for 32-bit guests on such a system.

   - Addition of new ID registers and fields as the architecture has
     been extended.

  Perf and PMU drivers:

   - Minor fixes and cleanups to system PMU drivers.

  Hardware errata:

   - Unify KVM workarounds for VHE and nVHE configurations.

   - Sort vendor errata entries in Kconfig.

  Secure Monitor Call Calling Convention (SMCCC):

   - Update to the latest specification from Arm (v1.2).

   - Allow PSCI code to query the SMCCC version.

  Software Delegated Exception Interface (SDEI):

   - Unexport a bunch of unused symbols.

   - Minor fixes to handling of firmware data.

  Pointer authentication:

   - Add support for dumping the kernel PAC mask in vmcoreinfo so that
     the stack can be unwound by tools such as kdump.

   - Simplification of key initialisation during CPU bringup.

  BPF backend:

   - Improve immediate generation for logical and add/sub instructions.

  vDSO:

   - Minor fixes to the linker flags for consistency with other
     architectures and support for LLVM's unwinder.

   - Clean up logic to initialise and map the vDSO into userspace.

  ACPI:

   - Work around for an ambiguity in the IORT specification relating to
     the "num_ids" field.

   - Support _DMA method for all named components rather than only PCIe
     root complexes.

   - Minor other IORT-related fixes.

  Miscellaneous:

   - Initialise debug traps early for KGDB and fix KDB cacheflushing
     deadlock.

   - Minor tweaks to early boot state (documentation update, set
     TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections).

   - Refactoring and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
  KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h
  KVM: arm64: Check advertised Stage-2 page size capability
  arm64/cpufeature: Add get_arm64_ftr_reg_nowarn()
  ACPI/IORT: Remove the unused __get_pci_rid()
  arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context
  arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register
  arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register
  arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register
  arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register
  arm64/cpufeature: Add remaining feature bits in ID_PFR0 register
  arm64/cpufeature: Introduce ID_MMFR5 CPU register
  arm64/cpufeature: Introduce ID_DFR1 CPU register
  arm64/cpufeature: Introduce ID_PFR2 CPU register
  arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0
  arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register
  arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register
  arm64: mm: Add asid_gen_match() helper
  firmware: smccc: Fix missing prototype warning for arm_smccc_version_init
  arm64: vdso: Fix CFI directives in sigreturn trampoline
  arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction
  ...
2020-06-01 15:18:27 -07:00
Jean-Philippe Brucker 10f6cd2af2 pmu/smmuv3: Clear IRQ affinity hint on device removal
Currently when trying to remove the SMMUv3 PMU module we get a
WARN_ON_ONCE from free_irq(), because the affinity hint set during probe
hasn't been properly cleared.

[  238.878383] WARNING: CPU: 0 PID: 175 at kernel/irq/manage.c:1744 free_irq+0x324/0x358
...
[  238.897263] Call trace:
[  238.897998]  free_irq+0x324/0x358
[  238.898792]  devm_irq_release+0x18/0x28
[  238.899189]  release_nodes+0x1b0/0x228
[  238.899984]  devres_release_all+0x38/0x60
[  238.900779]  device_release_driver_internal+0x10c/0x1d0
[  238.901574]  driver_detach+0x50/0xe0
[  238.902368]  bus_remove_driver+0x5c/0xd8
[  238.903448]  driver_unregister+0x30/0x60
[  238.903958]  platform_driver_unregister+0x14/0x20
[  238.905075]  arm_smmu_pmu_exit+0x1c/0xecc [arm_smmuv3_pmu]
[  238.905547]  __arm64_sys_delete_module+0x14c/0x260
[  238.906342]  el0_svc_common.constprop.0+0x74/0x178
[  238.907355]  do_el0_svc+0x24/0x90
[  238.907932]  el0_sync_handler+0x11c/0x198
[  238.908979]  el0_sync+0x158/0x180

Just like the other perf drivers, clear the affinity hint before
releasing the device.

Fixes: 7d839b4b9e ("perf/smmuv3: Add arm64 smmuv3 pmu driver")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Link: https://lore.kernel.org/r/20200422084805.237738-1-jean-philippe@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
2020-05-18 18:22:58 +01:00
Zhou Wang 97807325a0 drivers/perf: hisi: Permit modular builds of HiSilicon uncore drivers
This patch lets HiSilicon uncore PMU driver can be built as modules.
A common module and three specific uncore PMU driver modules will be built.

Export necessary functions in hisi_uncore_pmu module, and change
irq_set_affinity to irq_set_affinity_hint to pass compile.

Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Tested-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1588820305-174479-1-git-send-email-wangzhou1@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-05-18 18:18:39 +01:00
Shaokun Zhang 88562f06eb drivers/perf: hisi: Fix typo in events attribute array
Fix up one typo: wr_dr_64b -> wr_ddr_64b.

Fixes: 2bab3cf910 ("perf: hisi: Add support for HiSilicon SoC HHA PMU driver")
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/1587643530-34357-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-04-30 21:53:38 +01:00
Tang Bin 1f0d97bb70 drivers/perf: arm_spe_pmu: Avoid duplicate printouts
platform_get_irq() already screams on failure, so the redundant call to
dev_err() can be removed.

Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200402120330.19468-1-tangbin@cmss.chinamobile.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-04-30 21:49:32 +01:00
Tang Bin 5810f00ade drivers/perf: arm_dsu_pmu: Avoid duplicate printouts
platform_get_irq() already screams on failure, so the redundant call to
dev_err() can be removed.

Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20200402115940.4928-1-tangbin@cmss.chinamobile.com
Signed-off-by: Will Deacon <will@kernel.org>
2020-04-30 21:48:10 +01:00
Alexey Budankov cea7d0d4a5 drivers/perf: Open access for CAP_PERFMON privileged process
Open access to monitoring for CAP_PERFMON privileged process.  Providing
the access under CAP_PERFMON capability singly, without the rest of
CAP_SYS_ADMIN credentials, excludes chances to misuse the credentials
and makes operation more secure.

CAP_PERFMON implements the principle of least privilege for performance
monitoring and observability operations (POSIX IEEE 1003.1e 2.2.2.39
principle of least privilege: A security design principle that states
that a process or program be granted only those privileges (e.g.,
capabilities) necessary to accomplish its legitimate function, and only
for the time that such privileges are actually required)

For backward compatibility reasons access to the monitoring remains open
for CAP_SYS_ADMIN privileged processes but CAP_SYS_ADMIN usage for
secure monitoring is discouraged with respect to CAP_PERFMON capability.

Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-doc@vger.kernel.org
Cc: linux-man@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Link: http://lore.kernel.org/lkml/4ec1d6f7-548c-8d1c-f84a-cebeb9674e4e@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-16 12:19:09 -03:00
Linus Torvalds 3cd86a58f7 arm64 updates for 5.7:
- In-kernel Pointer Authentication support (previously only offered to
   user space).
 
 - ARM Activity Monitors (AMU) extension support allowing better CPU
   utilisation numbers for the scheduler (frequency invariance).
 
 - Memory hot-remove support for arm64.
 
 - Lots of asm annotations (SYM_*) in preparation for the in-kernel
   Branch Target Identification (BTI) support.
 
 - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU
   init callbacks, support for new DT compatibles.
 
 - IPv6 header checksum optimisation.
 
 - Fixes: SDEI (software delegated exception interface) double-lock on
   hibernate with shared events.
 
 - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm()
   converted to C, cpufeature finalisation helper.
 
 - sys_mremap() comment explaining the asymmetric address untagging
   behaviour.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl6DVyIACgkQa9axLQDI
 XvHkqRAAiZA2EYKiQL4M1DJ1cNTADjT7xKX9+UtYBXj7GMVhgVWdunpHVE6qtfgk
 cT6avmKrS/6PDqizJgr+Z1yX8x3Kvs57G4BvmIUKIw97mkdewvFQ9JKv6VA1vb86
 7Qrl1WzqsGg5Kj9uUfI4h+ZoT1H4C/9PQeFxJwgZRtF9DxRh8O7VeZI+JCu8Aub2
 lIkjI8rh+EpTsGT9h/PMGWUcawnKQloZ1/F+GfMAuYBvIv2RNN2xVreJtTmm4NyJ
 VcpL0KCNyAI2lGdaJg5nBLRDyGuXDm5i+PLsCSXMquI4fie00txXeD8sjbeuO0ks
 YTJ0EhmUUhbSE17go+SxYiEFE0v09i+lD5ud+B4Vmojp0KTczTta9VSgURlbb2/9
 n9biq5G3PPDNIrZqiTT2Tf4AMz1350nkbzL2gzKecM5aIzR/u3y5yII5CgfZtFnj
 7bGbyFpFpcqI7UaISPsNCxmknbTt/7ff0WM3+7SbecxI3AD2mnxsOdN9JTLyhDp+
 owjyiaWxl5zMWF9DhplLG/9BKpNWSxh3skazdOdELd8GTq2MbJlXrVG2XgXTAOh3
 y1s6RQrfw8zXh8TSqdmmzauComXIRWTum/sbVB3U8Z3AUsIeq/NTSbN5X9JyIbOP
 HOabhlVhhkI6omN1grqPX4jwUiZLZoNfn7Ez4q71549KVK/uBtA=
 =LJVX
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "The bulk is in-kernel pointer authentication, activity monitors and
  lots of asm symbol annotations. I also queued the sys_mremap() patch
  commenting the asymmetry in the address untagging.

  Summary:

   - In-kernel Pointer Authentication support (previously only offered
     to user space).

   - ARM Activity Monitors (AMU) extension support allowing better CPU
     utilisation numbers for the scheduler (frequency invariance).

   - Memory hot-remove support for arm64.

   - Lots of asm annotations (SYM_*) in preparation for the in-kernel
     Branch Target Identification (BTI) support.

   - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
     PMU init callbacks, support for new DT compatibles.

   - IPv6 header checksum optimisation.

   - Fixes: SDEI (software delegated exception interface) double-lock on
     hibernate with shared events.

   - Minor clean-ups and refactoring: cpu_ops accessor,
     cpu_do_switch_mm() converted to C, cpufeature finalisation helper.

   - sys_mremap() comment explaining the asymmetric address untagging
     behaviour"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
  mm/mremap: Add comment explaining the untagging behaviour of mremap()
  arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
  arm64: Introduce get_cpu_ops() helper function
  arm64: Rename cpu_read_ops() to init_cpu_ops()
  arm64: Declare ACPI parking protocol CPU operation if needed
  arm64: move kimage_vaddr to .rodata
  arm64: use mov_q instead of literal ldr
  arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
  lkdtm: arm64: test kernel pointer authentication
  arm64: compile the kernel with ptrauth return address signing
  kconfig: Add support for 'as-option'
  arm64: suspend: restore the kernel ptrauth keys
  arm64: __show_regs: strip PAC from lr in printk
  arm64: unwind: strip PAC from kernel addresses
  arm64: mask PAC bits of __builtin_return_address
  arm64: initialize ptrauth keys for kernel booting task
  arm64: initialize and switch ptrauth kernel keys
  arm64: enable ptrauth earlier
  arm64: cpufeature: handle conflicts based on capability
  arm64: cpufeature: Move cpu capability helpers inside C file
  ...
2020-03-31 10:05:01 -07:00
Takashi Iwai 06236821ae perf: arm-ccn: Use scnprintf() for robustness
snprintf() is a hard-to-use function, it's especially difficult to use
it for concatenating substrings in a buffer with a limited size.
Since snprintf() returns the would-be-output size, not the actual
size, the subsequent use of snprintf() may point to the incorrect
position easily.  Although the current code doesn't actually overflow
the buffer, it's an incorrect usage.

This patch replaces such snprintf() calls with a safer version,
scnprintf().

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Will Deacon <will@kernel.org>
2020-03-17 22:45:56 +00:00
luanshi 3ba52ad55b drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointer
Fix bogus NULL checks on the return value of acpi_cpu_get_madt_gicc()
by checking for a 0 'gicc->performance_interrupt' value instead.

Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-03-02 12:07:35 +00:00
Joakim Zhang 049d919168 drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definition
When disabling a counter from ddr_perf_event_stop(), the counter value
is reset to 0 at the same time.

Preserve the counter value by performing a read-modify-write of the
PMU register and clearing only the enable bit.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-03-02 12:07:19 +00:00
luanshi aaa1972715 perf: arm_spe: Remove unnecessary zero check on 'nr_pages'
We already check that the 'nr_pages' is > 2, so there's no need to check
that it's != 0 later on.

Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-03-02 11:27:21 +00:00
John Garry 0ca2c0319a perf/smmuv3: Use platform_get_irq_optional() for wired interrupt
Even though a SMMUv3 PMCG implementation may use an MSI as the form of
interrupt source, the kernel would still complain that it does not find
the wired (GSIV) interrupt in this case:

root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found"
[   59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found
[   59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found
[   59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found
[   59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found
[   59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found
[   59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found
[   59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found
[   60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found

Use platform_get_irq_optional() to silence the warning.

If neither interrupt source is found, then the driver will still warn that
IRQ setup errored and the probe will fail.

Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-02-10 18:14:46 +00:00
Leonard Crestez 9ee68b314e perf/imx_ddr: Fix cpu hotplug state cleanup
This driver allocates a dynamic cpu hotplug state but never releases it.
If reloaded in a loop it will quickly trigger a WARN message:

	"No more dynamic states available for CPU hotplug"

Fix by calling cpuhp_remove_multi_state on remove like several other
perf pmu drivers.

Also fix the cleanup logic on probe error paths: add the missing
cpuhp_remove_multi_state call and properly check the return value from
cpuhp_state_add_instant_nocalls.

Fixes: 9a66d36cc7 ("drivers/perf: imx_ddr: Add DDR performance counter support to perf")
Acked-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15 12:48:40 +00:00
Shaokun Zhang 73daf0bba3 drivers/perf: hisi: Simplify hisi_read_sccl_and_ccl_id and its comment
hisi_read_sccl_and_ccl_id is not readable and its comment is a little
confused, so simplify the function and its comment as Mark's suggestion.

Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-01-10 15:58:57 +00:00
Hanjun Guo 8ae4bcf482 perf/smmuv3: Remove the leftover put_cpu() in error path
In smmu_pmu_probe(), there is put_cpu() in the error path,
which is wrong because we use raw_smp_processor_id() to
get the cpu ID, not get_cpu(), remove it.

While we are at it, kill 'out_cpuhp_err' altogether and
just return err if we fail to add the hotplug instance.

Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-12-18 16:15:36 +00:00
Shaokun Zhang 8703317ae5 drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform
For some HiSilicon platform, the originally designed SCCL_ID and CCL_ID
are not satisfied with much rich topology when the MT is set, so we
extend the SCCL_ID to MPIDR[aff3] and CCL_ID to MPIDR[aff2]. Let's
update this for HiSilicon uncore PMU driver.

Cc: John Garry <john.garry@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-11-07 13:07:55 +00:00
Joakim Zhang f1d303a1b5 perf/imx_ddr: Dump AXI ID filter info to userspace
caps/filter indicates whether HW supports AXI ID filter or not.
caps/enhanced_filter indicates whether HW supports enhanced AXI ID filter
or not.

Users can check filter features from userspace with these attributions.

Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
[will: reworked cap switch to be less error-prone]
Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04 17:25:16 +00:00
Joakim Zhang d3eeece9a8 perf/imx_ddr: Add driver for DDR PMU in i.MX8MPlus
Add driver for DDR PMU in i.MX8MPlus.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04 16:27:34 +00:00
Joakim Zhang 44f8bd014a perf/imx_ddr: Add enhanced AXI ID filter support
With DDR_CAP_AXI_ID_FILTER quirk, indicating HW supports AXI ID filter
which only can get bursts from DDR transaction, i.e. DDR read/write
requests.

This patch add DDR_CAP_AXI_ID_ENHANCED_FILTER quirk, indicating HW
supports AXI ID filter which can get bursts and bytes from DDR
transaction at the same time. We hope PMU always return bytes in the
driver due to it is more meaningful for users.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04 16:27:34 +00:00
Ganapatrao Prabhakerrao Kulkarni 5e2c27e833 drivers/perf: Add CCPI2 PMU support in ThunderX2 UNCORE driver.
CCPI2 is a low-latency high-bandwidth serial interface for inter socket
connectivity of ThunderX2 processors.

CCPI2 PMU supports up to 8 counters per socket. Counters are
independently programmable to different events and can be started and
stopped individually. The CCPI2 counters are 64-bit and do not overflow
in normal operation.

Signed-off-by: Ganapatrao Prabhakerrao Kulkarni <gkulkarni@marvell.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-10-29 10:08:46 +00:00
Marek Bykowski 126b0a1700 perf: arm-ccn: Enable stats for CCN-512 interconnect
Add compatible string for the ARM CCN-512 interconnect

Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com>
Signed-off-by: Boleslaw Malecki <boleslaw.malecki@tieto.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-10-28 15:40:42 +00:00
YueHaibing c8b0de762e perf/smmuv3: use devm_platform_ioremap_resource() to simplify code
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01 12:35:44 +01:00
YueHaibing 504db0f826 perf/arm-cci: use devm_platform_ioremap_resource() to simplify code
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01 12:28:47 +01:00
YueHaibing 1c8d96b41d perf/arm-ccn: use devm_platform_ioremap_resource() to simplify code
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01 12:28:46 +01:00
YueHaibing 7fdd7f7c33 perf: xgene: use devm_platform_ioremap_resource() to simplify code
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01 12:28:46 +01:00
YueHaibing 42c184ade4 perf: hisi: use devm_platform_ioremap_resource() to simplify code
Use devm_platform_ioremap_resource() to simplify the code a bit.
This is detected by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01 12:28:46 +01:00
Will Deacon ac12cf85d6 Merge branches 'for-next/52-bit-kva', 'for-next/cpu-topology', 'for-next/error-injection', 'for-next/perf', 'for-next/psci-cpuidle', 'for-next/rng', 'for-next/smpboot', 'for-next/tbi' and 'for-next/tlbi' into for-next/core
* for-next/52-bit-kva: (25 commits)
  Support for 52-bit virtual addressing in kernel space

* for-next/cpu-topology: (9 commits)
  Move CPU topology parsing into core code and add support for ACPI 6.3

* for-next/error-injection: (2 commits)
  Support for function error injection via kprobes

* for-next/perf: (8 commits)
  Support for i.MX8 DDR PMU and proper SMMUv3 group validation

* for-next/psci-cpuidle: (7 commits)
  Move PSCI idle code into a new CPUidle driver

* for-next/rng: (4 commits)
  Support for 'rng-seed' property being passed in the devicetree

* for-next/smpboot: (3 commits)
  Reduce fragility of secondary CPU bringup in debug configurations

* for-next/tbi: (10 commits)
  Introduce new syscall ABI with relaxed requirements for pointer tags

* for-next/tlbi: (6 commits)
  Handle spurious page faults arising from kernel space
2019-08-30 12:46:12 +01:00
Joakim Zhang c12c0288e3 perf/imx_ddr: Add support for AXI ID filtering
AXI filtering is used by events 0x41 and 0x42 to count reads or writes
with an ARID or AWID matching a specified filter. The filter is exposed
to userspace as an (ID, MASK) pair, where each set bit in the mask
causes the corresponding bit in the ID to be ignored when matching
against the ID of memory transactions for the purposes of incrementing
the counter.

For example:

  # perf stat -a -e imx8_ddr0/axid-read,axi_mask=0xff,axi_id=0x800/ cmd

will count all read transactions from AXI IDs 0x800 - 0x8ff. If the
'axi_mask' is omitted, then it is treated as 0x0 which means that the
'axi_id' will be matched exactly.

Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-28 14:16:55 +01:00
Robin Murphy 3c9347351a perf/smmuv3: Validate groups for global filtering
With global filtering, it becomes possible for users to construct
self-contradictory groups with conflicting filters. Make sure we
cover that when initially validating events.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-27 19:37:04 +01:00
Robin Murphy 33e84ea433 perf/smmuv3: Validate group size
Ensure that a group will actually fit into the available counters.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-27 19:37:04 +01:00
Stephen Boyd 228f855fb5 perf: Remove dev_err() usage after platform_get_irq()
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Will Deacon <will@kernel.org>
2019-07-31 17:15:20 +01:00