PCI interrupt lines start at 1, not at 0. So, creates additional one
interrupt when register for irq domain.
Error when PCIe devices have 4 INTx:
WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:280
irq_domain_associate+0x17c/0x1cc()
error: hwirq 0x4 is too large for dummy
Tested on Ethernet adapter card with multi-functions.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Check TLP packet successful completion status. This fix the issue when
accessing multi-function devices in enumeration process, TLP will return
error when accessing non-exist function number. Returns PCI error code
instead of generic errno.
Tested on Ethernet adapter card with multi-functions.
[bhelgaas: simplify completion status checking code]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Requester ID should use the Root Port devfn and it should be always 0.
Previously we constructed the Requester ID using the *Completer* devfn,
i.e., the devfn of the Function we expect to respond to the config access.
This causes issues when accessing configuration space for devices other
than the Root Port.
Build the Requester ID using the Root Port devfn.
Tested on Ethernet adapter card with multi-functions.
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
TLP_LOOP is 500 and the "loop" variable was a u8 so "loop < TLP_LOOP" is
always true. We only need this condition to work if there is a problem so
it would have been easy to miss this in testing.
Make it a normal for loop with "int i" instead of over thinking things and
making it complicated.
Fixes: 6bb4dd154ae8 ("PCI: altera: Add Altera PCIe host controller driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Ley Foon Tan <lftan@altera.com>
The hisi_pcie_probe() function is incorrectly marked as __init, as Kconfig
tells us:
WARNING: drivers/pci/host/built-in.o(.data+0x7780): Section mismatch in reference from the variable hisi_pcie_driver to the function .init.text:hisi_pcie_probe()
If the probe for this device gets deferred past the point where __init
functions are removed, or the device is unbound and then reattached to the
driver, we branch into uninitialized memory, which is bad.
Remove the __init annotation from hisi_pcie_probe() and
hisi_add_pcie_port().
Fixes: 500a1d9a43 ("PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
"pp->io" is an I/O resource, e.g., "[io 0x0000-0xffff]"; "pp->io_base" is
the CPU physical address of a region where the host bridge converts CPU
memory accesses into PCI I/O transactions.
Corrupting pp->io_base by assigning pp->io->start to it breaks access to
the PCI I/O space, as reported by Kishon.
Remove the invalid assignment.
[bhelgaas: changelog]
Fixes: 0021d22b73 ("PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT")
Reported-and-tested-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
* pci/host-altera:
PCI: altera: Add Altera PCIe MSI driver
PCI: altera: Add Altera PCIe host controller driver
ARM: Add msi.h to Kbuild
* pci/host-designware:
PCI: designware: Make "clocks" and "clock-names" optional DT properties
PCI: designware: Make driver arch-agnostic
ARM/PCI: Replace pci_sys_data->align_resource with global function pointer
PCI: designware: Use of_pci_get_host_bridge_resources() to parse DT
Revert "PCI: designware: Program ATU with untranslated address"
PCI: designware: Move calculation of bus addresses to DRA7xx
PCI: designware: Make "num-lanes" an optional DT property
PCI: designware: Require config accesses to be naturally aligned
PCI: designware: Simplify dw_pcie_cfg_read/write() interfaces
PCI: designware: Use exact access size in dw_pcie_cfg_read()
PCI: spear: Fix dw_pcie_cfg_read/write() usage
PCI: designware: Set up high part of MSI target address
PCI: designware: Make get_msi_addr() return phys_addr_t, not u32
PCI: designware: Implement multivector MSI IRQ setup
PCI: designware: Factor out MSI msg setup
PCI: Add msi_controller setup_irqs() method for special multivector setup
PCI: designware: Fix PORT_LOGIC_LINK_WIDTH_MASK
* pci/host-generic:
PCI: generic: Fix address window calculation for non-zero starting bus
PCI: generic: Pass starting bus number to pci_scan_root_bus()
PCI: generic: Allow multiple hosts with different map_bus() methods
arm64: dts: Drop linux,pci-probe-only from the Seattle DTS
powerpc/PCI: Fix lookup of linux,pci-probe-only property
PCI: generic: Fix lookup of linux,pci-probe-only property
of/pci: Add of_pci_check_probe_only to parse "linux,pci-probe-only"
* pci/host-imx6:
PCI: imx6: Add PCIE_PHY_RX_ASIC_OUT_VALID definition
PCI: imx6: Return real error code from imx6_add_pcie_port()
* pci/host-iproc:
PCI: iproc: Fix header comment "Corporation" misspelling
PCI: iproc: Add outbound mapping support
PCI: iproc: Update PCIe device tree bindings
PCI: iproc: Improve link detection logic
PCI: iproc: Fix PCIe reset logic
PCI: iproc: Call pci_fixup_irqs() for ARM64 as well as ARM
PCI: iproc: Remove unused struct iproc_pcie.irqs[]
PCI: iproc: Fix code comment to match code
* pci/host-mvebu:
PCI: mvebu: Remove code restricting accesses to slot 0
PCI: mvebu: Add PCI Express root complex capability block
PCI: mvebu: Improve clock/reset handling
PCI: mvebu: Use gpio_desc to carry around gpio
PCI: mvebu: Use devm_kcalloc() to allocate an array
PCI: mvebu: Use gpio_set_value_cansleep()
PCI: mvebu: Split port parsing and resource claiming from port setup
PCI: mvebu: Fix memory leaks and refcount leaks
PCI: mvebu: Move port parsing and resource claiming to separate function
PCI: mvebu: Use port->name rather than "PCIe%d.%d"
PCI: mvebu: Report full node name when reporting a DT error
PCI: mvebu: Use for_each_available_child_of_node() to walk child nodes
PCI: mvebu: Use of_get_available_child_count()
PCI: mvebu: Use exact config access size; don't read/modify/write
PCI: mvebu: Return zero for reserved or unimplemented config space
* pci/host-rcar:
PCI: rcar: Fix I/O offset for multiple host bridges
PCI: rcar: Set root bus nr to that provided in DT
PCI: rcar: Remove dependency on ARM-specific struct hw_pci
PCI: rcar: Make PCI aware of the I/O resources
PCI: rcar: Build pcie-rcar.c only on ARM
PCI: rcar: Build pci-rcar-gen2.c only on ARM
* pci/host-tegra:
PCI: tegra: Wrap static pgprot_t initializer with __pgprot()
* pci/host-xgene:
PCI/MSI: xgene: Remove msi_controller assignment
Add Altera PCIe MSI driver. This soft IP supports a configurable number of
vectors, which is a DTS parameter.
[bhelgaas: Kconfig depend on PCIE_ALTERA, typos, whitespace]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Layerscape PCIe has its own MSI implementation.
Register ls_pcie_msi_host_init() to avoid using DesignWare's MSI.
[bhelgaas: add comment]
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Both LS1043a and LS2080a are based on ARMv8 64-bit architecture and have
similar PCIe implementation. LUT is added to controller.
Add LS1043a and LS2080a support.
[bhelgaas: move unused field removal into separate patch, include DT update]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> (DT update)
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de> (DT update)
Removed unused node, dev, and bus fields from struct ls_pcie.
[bhelgaas: split into separate patch]
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Update the ls_add_pcie_port() signature to keep it consistent with the
other DesignWare-based host drivers.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
For the LS1021a PCIe controller, some status registers are located in SCFG,
unlike other Layerscape devices.
Move SCFG-related code to ls1021_pcie_host_init() and rename
ls_pcie_link_up() to ls1021_pcie_link_up() because LTSSM status is also in
SCFG.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Layerscape PCIe controller supports root complex (RC) and endpoint (EP)
modes, which can be set by RCW.
If not in RC mode, return -ENODEV without claiming the controller.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
ls_pcie_establish_link() does not do any real operation, except to wait for
the linkup establishment. In fact, this is not necessary. Moreover, each
PCIe controller not inserted device will increase the Linux startup time
about 200ms.
Remove ls_pcie_establish_link().
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously, dw_pcie_host_init() created the PCI host bridge with
pci_common_init_dev(), an ARM-specific function that supplies the ARM-
specific pci_sys_data structure as the PCI "sysdata".
Make pcie-designware.c arch-agnostic by reimplementing the functionality of
pci_common_init_dev() directly in dw_pcie_host_init().
Note that this changes the bridge sysdata from the ARM pci_sys_data to the
DesignWare pcie_port structure. This doesn't affect the ARM sysdata users
because they are all specific to non-DesignWare host bridges, which will
still have pci_sys_data.
[bhelgaas: changelog]
Tested-by: James Morse <james.morse@arm.com>
Tested-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Tested-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Use the new of_pci_get_host_bridge_resources() API in place of the PCI OF
DT parser.
[bhelgaas: changelog]
Tested-by: James Morse <james.morse@arm.com>
Tested-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Tested-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Revert f4c55c5a3f ("PCI: designware: Program ATU with untranslated
address").
Note that dra7xx_pcie_host_init() now modifies pp->io_base, but we still
need the original value for dw_pcie_setup() in the path below, so this adds
a new io_base_tmp member. It will be removed later when dw_pcie_setup() is
removed.
dra7xx_add_pcie_port
dw_pcie_host_init
pp->io_base = range.cpu_addr
pp->io_base_tmp = range.cpu_addr # <-- added
pp->ops->host_init
dra7xx_pcie_host_init # ops->host_init
pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR # <-- modified
pci_common_init_dev(..., &dw_pci)
pcibios_init_hw
hw->setup
dw_pcie_setup # hw_pci.setup
pci_ioremap_io(..., pp->io_base_tmp) # <-- original addr required
[bhelgaas: changelog]
Tested-by: James Morse <james.morse@arm.com>
Tested-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Tested-by: Minghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Commit f4c55c5a3f ("PCI: designware: Program ATU with untranslated
address") added the calculation of PCI bus addresses in pcie-designware.c,
storing them in new fields added in struct pcie_port. This calculation is
done for every DesignWare user even though it only applies to DRA7xx.
Move the calculation of the bus addresses to the DRA7xx driver to allow the
rework of DesignWare to use the new DT parsing API.
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Currently "num-lanes" is read in dw_pcie_host_init(), but it is only used
if we call dw_pcie_setup_rc() while bringing up the link. If the link has
already been brought up by firmware, we need not call dw_pcie_setup_rc(),
and "num-lanes" is unnecessary.
Only complain about "num-lanes" if we actually need it and we didn't find a
valid value.
[bhelgaas: changelog]
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add sanity checks on "addr" input parameter in dw_pcie_cfg_read() and
dw_pcie_cfg_write(). These checks make sure that accesses are aligned on
their size, e.g., a 4-byte config access is aligned on a 4-byte boundary.
[bhelgaas: changelog, set *val = 0 in failure case]
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
Callers of dw_pcie_cfg_read() and dw_pcie_cfg_write() previously had to
split the address into "addr" and "where". The callees assumed "addr" was
32-bit aligned (with zeros in the low two bits) and they used only the low
two bits of "where".
Accept the entire address in "addr" and drop the now-redundant "where"
argument. As an example, this replaces this:
int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val)
*val = readb(addr + (where & 1));
with this:
int dw_pcie_cfg_read(void __iomem *addr, int size, u32 *val)
*val = readb(addr):
[bhelgaas: changelog, split access size change to separate patch]
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
dw_pcie_cfg_write() uses the exact 8-, 16-, or 32-bit access size
requested, but dw_pcie_cfg_read() previously performed a 32-bit read and
masked out the bits requested.
Use the exact access size in dw_pcie_cfg_read(). For example, if we want
an 8-bit read, use readb() instead of using readl() and masking out the 8
bits we need. This makes it symmetric with dw_pcie_cfg_write().
[bhelgaas: split into separate patch, set *val = 0 in failure case]
Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The first argument of dw_pcie_cfg_read/write() is a 32-bit aligned address.
The second argument is the byte offset into a 32-bit word, and
dw_pcie_cfg_read/write() only look at the low two bits.
SPEAr13xx used dw_pcie_cfg_read() and dw_pcie_cfg_write() incorrectly: it
passed important address bits in the second argument, where they were
ignored.
Pass the complete 32-bit word address in the first argument and only the
2-bit offset into that word in the second argument.
Without this fix, SPEAr13xx host will never work with few buggy gen1 card
which connects with only gen1 host and also with any endpoint which would
generate a read request of more than 128 bytes.
[bhelgaas: changelog]
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Pratyush Anand <panand@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.17+
Set up the high part of the MSI target address to allow the MSI target to
be above 4GB on 64bit and PAE systems.
[bhelgaas: changelog]
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Pratyush Anand <pratyush.anand@gmail.com>
On ARM64, setting the root bus number to -1 causes probe failure.
Moreover, we should use the bus number specified in the DT as we could have
multiple PCIe controllers with different bus ranges.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
The R-Car PCIe host controller driver uses pci_common_init_dev(), which is
ARM-specific and requires the ARM struct hw_pci. The part of
pci_common_init_dev() that is needed is limited and can be done here
without using hw_pci.
Note that the ARM pcibios functions expect the PCI sysdata to be a pointer
to a struct pci_sys_data. Add a struct pci_sys_data as the first element
in struct gen_pci so that when we use a gen_pci pointer as sysdata, it is
also a pointer to a struct pci_sys_data.
Create and scan the root bus directly without using the ARM
pci_common_init_dev() interface.
Based on 499733e0cc ("PCI: generic: Remove dependency on ARM-specific
struct hw_pci").
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Make PCI aware of the I/O resources.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
The pcie-rcar.c driver (controlled by PCI_RCAR_GEN2_PCIE) uses struct
pci_sys_data and pci_ioremap_io(), which only exist on ARM. Building it on
other arches, e.g., arm64/shmobile, causes errors like this:
drivers/pci/host/pcie-rcar.c:138:52: warning: 'struct pci_sys_data' declared inside parameter list
drivers/pci/host/pcie-rcar.c:380:4: error: implicit declaration of function 'pci_ioremap_io' [-Werror=implicit-function-declaration]
Build pcie-rcar.c only on ARM.
[bhelgaas: changelog, split to separate pci-rcar-gen2 from pcie-rcar]
Reported-by: Wolfram Sang <wsa@the-dreams.de> (pci_ioremap_io())
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The pci-rcar-gen2.c driver (controlled by PCI_RCAR_GEN2) uses struct
pci_sys_data, which only exists on ARM. Building it on other arches, e.g.,
arm64/shmobile, causes errors like this:
drivers/pci/host/pci-rcar-gen2.c: In function 'rcar_pci_cfg_base': drivers/pci/host/pci-rcar-gen2.c:112:34: error: dereferencing pointer to incomplete type
struct rcar_pci_priv *priv = sys->private_data;
^
Build pci-rcar-gen2.c only on ARM.
[bhelgaas: changelog, split to separate pci-rcar-gen2 from pcie-rcar]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add the Altera PCIe host controller driver.
[bhelgaas: whitespace, fold in DT and maintainer updates, OF_PCI
dependency from Arnd]
Signed-off-by: Ley Foon Tan <lftan@altera.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Rob Herring <robh@kernel.org> (DT binding)
Certain SoCs require the PCIe outbound mapping to be configured in
software. Add support for those chips.
[jonmason: Use %pap format when printing size_t to avoid warnings in 32-bit
build.]
[arnd: Use div64_u64() instead of "%" to avoid __aeabi_uldivmod link error
in 32-bit build.]
Signed-off-by: Ray Jui <rjui@broadcom.com>
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
As we continue to push of_node towards the outskirts of irq domains,
let's start tackling the case of msi_create_irq_domain and its little
friends.
This has limited impact in both PCI/MSI, platform MSI, and a few
drivers.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Cc: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Cc: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: Graeme Gregory <graeme@xora.org.uk>
Cc: Jake Oshins <jakeo@microsoft.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Link: http://lkml.kernel.org/r/1444737105-31573-17-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make the offset from the beginning of the "reg" property be from the
starting bus number, rather than zero. Hoist the invariant size
calculation out of the mapping for loop.
Update host-generic-pci.txt to clarify the semantics of the "reg" property
with respect to non-zero starting bus numbers.
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Rob Herring <robh@kernel.org>
Now that we advertise a PCIe capability, the Linux PCI layer will not scan
the bus for devices other than in slot 0. This makes the work-around to
trap accesses to devices other than slot 0 unnecessary.
Tested-by: Willy Tarreau <w@1wt.eu> (Iomega iConnect Kirkwood, MiraBox Armada 370)
Tested-by: Andrew Lunn <andrew@lunn.ch> (D-Link DIR664 Kirkwood)
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (Armada XP GP)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a PCI Express root complex capability block so the PCI layer identifies
the bridge as a PCI Express device.
We expose this as a version 1 PCIe capability block, with slot support. We
disable the clock power management capability as this depends on boards
wiring the CLKREQ# signal.
Tested-by: Willy Tarreau <w@1wt.eu> (Iomega iConnect Kirkwood, MiraBox Armada 370)
Tested-by: Andrew Lunn <andrew@lunn.ch> (D-Link DIR664 Kirkwood)
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (Armada XP GP)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an implementation to handle clock and reset handling that is compliant
with the PCIe specification. The clock should be running and stable for
100us prior to reset being released, and we should re-assert reset prior to
stopping the clock.
Tested-by: Willy Tarreau <w@1wt.eu> (Iomega iConnect Kirkwood, MiraBox Armada 370)
Tested-by: Andrew Lunn <andrew@lunn.ch> (D-Link DIR664 Kirkwood)
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (Armada XP GP)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use a gpio_desc to carry around the gpio, so we can then make use of the
GPIOF_ACTIVE_LOW property rather than carrying that around as well. This
also avoids needing to use gpio_is_valid() to check whether we have a GPIO;
checking for a non-NULL descriptor is simpler.
Tested-by: Willy Tarreau <w@1wt.eu> (Iomega iConnect Kirkwood, MiraBox Armada 370)
Tested-by: Andrew Lunn <andrew@lunn.ch> (D-Link DIR664 Kirkwood)
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (Armada XP GP)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rather than using devm_kzalloc() and multiplying the element and number,
use the provided devm_kcalloc() helper for this.
Tested-by: Willy Tarreau <w@1wt.eu> (Iomega iConnect Kirkwood, MiraBox Armada 370)
Tested-by: Andrew Lunn <andrew@lunn.ch> (D-Link DIR664 Kirkwood)
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (Armada XP GP)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We are in a context where we can sleep, and the PCIe reset gpio may be on
an I2C expander. Use the cansleep() variant when setting the GPIO value.
Tested-by: Willy Tarreau <w@1wt.eu> (Iomega iConnect Kirkwood, MiraBox Armada 370)
Tested-by: Andrew Lunn <andrew@lunn.ch> (D-Link DIR664 Kirkwood)
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (Armada XP GP)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Split the PCIe port DT parsing and resource claiming from setting up the
actual ports. This allows us to gather all the resources first, before
touching the hardware. This is important as some of these resources (such
as the GPIO for the PCIe reset) may defer probing.
Tested-by: Willy Tarreau <w@1wt.eu> (Iomega iConnect Kirkwood, MiraBox Armada 370)
Tested-by: Andrew Lunn <andrew@lunn.ch> (D-Link DIR664 Kirkwood)
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (Armada XP GP)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mvebu PCI port parsing is weak due to:
1) allocations via kasprintf() were not cleaned up when we encounter an
error or decide to skip the port.
2) kasprintf() wasn't checked for failure.
3) of_get_named_gpio_flags() returns EPROBE_DEFER if the GPIO is not
present, not devm_gpio_request_one().
4) the of_node was not being put when terminating the loop.
Fix these oversights.
Tested-by: Willy Tarreau <w@1wt.eu> (Iomega iConnect Kirkwood, MiraBox Armada 370)
Tested-by: Andrew Lunn <andrew@lunn.ch> (D-Link DIR664 Kirkwood)
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (Armada XP GP)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move the PCIe port parsing and resource claiming to a separate function in
preparation to add proper cleanup of claimed resources.
Tested-by: Willy Tarreau <w@1wt.eu> (Iomega iConnect Kirkwood, MiraBox Armada 370)
Tested-by: Andrew Lunn <andrew@lunn.ch> (D-Link DIR664 Kirkwood)
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (Armada XP GP)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the port->name string which we previously formatted when referring to
the name of a port, rather than manually creating the port name each time.
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> (Armada XP GP)
Tested-by: Andrew Lunn <andrew@lunn.ch> (Kirkwood DIR665)
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ley Foon Tan
Dan Carpenter
Arnd Bergmann
Stanimir Varbanov
Linus Torvalds
Bjorn Helgaas
Zhou Wang
Minghuan Lian
Gabriele Paoloni
Lucas Stach
Phil Edworthy
Geert Uytterhoeven
Florian Fainelli
Ray Jui
Marc Zyngier
David Daney
Russell King