Pull remaining vfs xattr work from Al Viro:
"The rest of work.xattr (non-cifs conversions)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
btrfs: Switch to generic xattr handlers
ubifs: Switch to generic xattr handlers
jfs: Switch to generic xattr handlers
jfs: Clean up xattr name mapping
gfs2: Switch to generic xattr handlers
ceph: kill __ceph_removexattr()
ceph: Switch to generic xattr handlers
ceph: Get rid of d_find_alias in ceph_set_acl
Add a catch-all xattr handler at the end of ceph_xattr_handlers. Check
for valid attribute names there, and remove those checks from
__ceph_{get,set,remove}xattr instead. No "system.*" xattrs need to be
handled by the catch-all handler anymore.
The set xattr handler is called with a NULL value to indicate that the
attribute should be removed; __ceph_setxattr already handles that case
correctly (ceph_set_acl could already calling __ceph_setxattr with a NULL
value).
Move the check for snapshots from ceph_{set,remove}xattr into
__ceph_{set,remove}xattr. With that, ceph_{get,set,remove}xattr can be
replaced with the generic iops.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use kmem_cache_zalloc() instead of kmem_cache_alloc() with flag GFP_ZERO.
Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If dentry has no lease, ceph_d_revalidate() previously return 0.
This causes VFS to invalidate the dentry and create a new dentry
for later lookup. Invalidating a dentry also detach any underneath
mount points. So mount point inside cephfs can disapear mystically
(even the mount point is not modified by other hosts).
The fix is using lookup request to revalidate dentry without lease.
This can partly solve the mount points disapear issue (as long as
the mount point is not modified by other hosts)
Signed-off-by: Yan, Zheng <zyan@redhat.com>
When security is enabled, security module can call filesystem's
getxattr/setxattr callbacks during d_instantiate(). For cephfs,
d_instantiate() is usually called by MDS' dispatch thread, while
handling MDS reply. If the MDS reply does not include xattrs and
corresponding caps, getxattr/setxattr need to send a new request
to MDS and waits for the reply. This makes MDS' dispatch sleep,
nobody handles later MDS replies.
The fix is make sure lookup/atomic_open reply include xattrs and
corresponding caps. So getxattr can be handled by cached xattrs.
This requires some modification to both MDS and request message.
(Client tells MDS what caps it wants; MDS encodes proper caps in
the reply)
Smack security module may call setxattr during d_instantiate().
Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL
to us. So just make setxattr return error when called by MDS'
dispatch thread.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).
Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Previously our dcache readdir code relies on that child dentries in
directory dentry's d_subdir list are sorted by dentry's offset in
descending order. When adding dentries to the dcache, if a dentry
already exists, our readdir code moves it to head of directory
dentry's d_subdir list. This design relies on dcache internals.
Al Viro suggests using ncpfs's approach: keeping array of pointers
to dentries in page cache of directory inode. the validity of those
pointers are presented by directory inode's complete and ordered
flags. When a dentry gets pruned, we clear directory inode's complete
flag in the d_prune() callback. Before moving a dentry to other
directory, we clear the ordered flag for both old and new directory.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
GFP_NOFS memory allocation is required for page writeback path.
But there is no need to use GFP_NOFS in syscall path and readpage
path
Signed-off-by: Yan, Zheng <zyan@redhat.com>
fsync() on directory should flush dirty caps and wait for any
uncommitted directory opertions to commit. But ceph_dir_fsync()
only waits for uncommitted directory opertions.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
No need to bifurcate wait now that we've got ceph_timeout_jiffies().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
There are currently three libceph-level timeouts that the user can
specify on mount: mount_timeout, osd_idle_ttl and osdkeepalive. All of
these are in seconds and no checking is done on user input: negative
values are accepted, we multiply them all by HZ which may or may not
overflow, arbitrarily large jiffies then get added together, etc.
There is also a bug in the way mount_timeout=0 is handled. It's
supposed to mean "infinite timeout", but that's not how wait.h APIs
treat it and so __ceph_open_session() for example will busy loop
without much chance of being interrupted if none of ceph-mons are
there.
Fix all this by verifying user input, storing timeouts capped by
msecs_to_jiffies() in jiffies and using the new ceph_timeout_jiffies()
helper for all user-specified waits to handle infinite timeouts
correctly.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
Currently, there is no check for the kstrdup() for r_path2,
r_path1 and snapdir_name as various locations as there is a
possibility of failure during memory pressure. Therefore,
returning ENOMEM where the checks have been missed.
Signed-off-by: Sanidhya Kashyap <sanidhya.gatech@gmail.com>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
return type of wait_for_completion_timeout is unsigned long not int. An
appropriately named unsigned long is added and the assignment fixed up.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Yan, Zheng <zyan@redhat.com>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull more vfs updates from Al Viro:
"Assorted stuff from this cycle. The big ones here are multilayer
overlayfs from Miklos and beginning of sorting ->d_inode accesses out
from David"
* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits)
autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation
procfs: fix race between symlink removals and traversals
debugfs: leave freeing a symlink body until inode eviction
Documentation/filesystems/Locking: ->get_sb() is long gone
trylock_super(): replacement for grab_super_passive()
fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
SELinux: Use d_is_positive() rather than testing dentry->d_inode
Smack: Use d_is_positive() rather than testing dentry->d_inode
TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR()
Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode
Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb
VFS: Split DCACHE_FILE_TYPE into regular and special types
VFS: Add a fallthrough flag for marking virtual dentries
VFS: Add a whiteout dentry type
VFS: Introduce inode-getting helpers for layered/unioned fs environments
Infiniband: Fix potential NULL d_inode dereference
posix_acl: fix reference leaks in posix_acl_create
autofs4: Wrong format for printing dentry
...
Convert the following where appropriate:
(1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).
(2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).
(3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more
complicated than it appears as some calls should be converted to
d_can_lookup() instead. The difference is whether the directory in
question is a real dir with a ->lookup op or whether it's a fake dir with
a ->d_automount op.
In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).
Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer. In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.
However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.
There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was
intended for special directory entry types that don't have attached inodes.
The following perl+coccinelle script was used:
use strict;
my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
print "No matches\n";
exit(0);
}
my @cocci = (
'@@',
'expression E;',
'@@',
'',
'- S_ISLNK(E->d_inode->i_mode)',
'+ d_is_symlink(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISDIR(E->d_inode->i_mode)',
'+ d_is_dir(E)',
'',
'@@',
'expression E;',
'@@',
'',
'- S_ISREG(E->d_inode->i_mode)',
'+ d_is_reg(E)' );
my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);
foreach my $file (@callers) {
chomp $file;
print "Processing ", $file, "\n";
system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
die "spatch failed";
}
[AV: overlayfs parts skipped]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When we receives traceless reply for request that created new inode,
we re-send a lookup request to MDS get information of the newly created
inode. (VFS expects FS' callback return an inode in create case)
This breaks one request into two requests. Other client may modify or
move to the new inode in the middle.
When the race happens, ceph_handle_notrace_create() unconditionally
links the dentry for 'create' operation to the inode returned by lookup.
This may confuse VFS when the inode is a directory (VFS does not allow
multiple linkages for directory inode).
This patch makes ceph_handle_notrace_create() when it detect a race.
This event should be rare and it happens only when we talk to old MDS.
Recent MDS does not send traceless reply for request that creates new
inode.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Pull ceph updates from Sage Weil:
"The big item here is support for inline data for CephFS and for
message signatures from Zheng. There are also several bug fixes,
including interrupted flock request handling, 0-length xattrs, mksnap,
cached readdir results, and a message version compat field. Finally
there are several cleanups from Ilya, Dan, and Markus.
Note that there is another series coming soon that fixes some bugs in
the RBD 'lingering' requests, but it isn't quite ready yet"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (27 commits)
ceph: fix setting empty extended attribute
ceph: fix mksnap crash
ceph: do_sync is never initialized
libceph: fixup includes in pagelist.h
ceph: support inline data feature
ceph: flush inline version
ceph: convert inline data to normal data before data write
ceph: sync read inline data
ceph: fetch inline data when getting Fcr cap refs
ceph: use getattr request to fetch inline data
ceph: add inline data to pagecache
ceph: parse inline data in MClientReply and MClientCaps
libceph: specify position of extent operation
libceph: add CREATE osd operation support
libceph: add SETXATTR/CMPXATTR osd operations support
rbd: don't treat CEPH_OSD_OP_DELETE as extent op
ceph: remove unused stringification macros
libceph: require cephx message signature by default
ceph: introduce global empty snap context
ceph: message versioning fixes
...
mksnap reply only contain 'target', does not contain 'dentry'. So
it's wrong to use req->r_reply_info.head->is_dentry to detect traceless
reply.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
After creating/deleting/renaming file, offsets of sibling dentries may
change. So we can not use cached dentries to satisfy readdir. But we can
still use the cached dentries to conclude -ENOENT for lookup.
This patch introduces a new inode flag indicating if child dentries are
ordered. The flag is set at the same time marking a directory complete.
After creating/deleting/renaming file, we clear the flag on directory
inode. This prevents ceph_readdir() from using cached dentries to satisfy
readdir syscall.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Pull Ceph updates from Sage Weil:
"There is the long-awaited discard support for RBD (Guangliang Zhao,
Josh Durgin), a pile of RBD bug fixes that didn't belong in late -rc's
(Ilya Dryomov, Li RongQing), a pile of fs/ceph bug fixes and
performance and debugging improvements (Yan, Zheng, John Spray), and a
smattering of cleanups (Chao Yu, Fabian Frederick, Joe Perches)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (40 commits)
ceph: fix divide-by-zero in __validate_layout()
rbd: rbd workqueues need a resque worker
libceph: ceph-msgr workqueue needs a resque worker
ceph: fix bool assignments
libceph: separate multiple ops with commas in debugfs output
libceph: sync osd op definitions in rados.h
libceph: remove redundant declaration
ceph: additional debugfs output
ceph: export ceph_session_state_name function
ceph: include the initial ACL in create/mkdir/mknod MDS requests
ceph: use pagelist to present MDS request data
libceph: reference counting pagelist
ceph: fix llistxattr on symlink
ceph: send client metadata to MDS
ceph: remove redundant code for max file size verification
ceph: remove redundant io_iter_advance()
ceph: move ceph_find_inode() outside the s_mutex
ceph: request xattrs if xattr_version is zero
rbd: set the remaining discard properties to enable support
rbd: use helpers to handle discard for layered images correctly
...
Current code set new file/directory's initial ACL in a non-atomic
manner.
Client first sends request to MDS to create new file/directory, then set
the initial ACL after the new file/directory is successfully created.
The fix is include the initial ACL in create/mkdir/mknod MDS requests.
So MDS can handle creating file/directory and setting the initial ACL in
one request.
Signed-off-by: Yan, Zheng <zyan@redhat.com>
Reviewed-by: Sage Weil <sage@redhat.com>
Now that d_invalidate always succeeds it is not longer necessary or
desirable to hard code d_drop calls into filesystem specific
d_revalidate implementations.
Remove the unnecessary d_drop calls and rely on d_invalidate
to drop the dentries. Using d_invalidate ensures that paths
to mount points will not be dropped.
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
When creating a file, ceph_set_dentry_offset() puts the new dentry
at the end of directory's d_subdirs, then set the dentry's offset
based on directory's max offset. The offset does not reflect the
real postion of the dentry in directory. Later readdir reply from
MDS may change the dentry's position/offset. This inconsistency
can cause missing/duplicate entries in readdir result if readdir
is partly satisfied by dcache_readdir().
The fix is clear directory's completeness after creating/renaming
file. It prevents later readdir from using dcache_readdir().
Fixes: http://tracker.ceph.com/issues/8025
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
skip dentries that were added before MDS issued FILE_SHARED to
client.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Preallocate buffer for readdir reply. Limit number of entries in
readdir reply according to the buffer size.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
This is racy--we do not know whather d_parent has changed out from
underneath us because i_mutex is not held on the source inode's directory.
Also, taking this reference is useless.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
This is just old_dir; no reason to abuse the dcache pointers.
Reported-by: Al Viro <viro.zeniv.linux.org.uk>
Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
If readdir 'frag' is adjusted, readdir 'offset' should be reset.
Otherwise some dentries may be lost when readdir and fragmenting
directory happen at the some.
Another way to fix this issue is let MDS adjust readdir 'frag'.
The code that handles MDS reply reset the readdir 'offset' if
the readdir reply is different than the requested one.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
When changing readdir postion, fi->next_offset should be set to 0
if the new postion is not in the first dirfrag.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Comparing offset with inode->i_sb->s_maxbytes doesn't make sense for
directory. For a fragmented directory, offset (frag_t, off) can be
larger than inode->i_sb->s_maxbytes.
At the very beginning of ceph_dir_llseek(), local variable old_offset
is initialized to parameter offset. This doesn't make sense neither.
Old_offset should be ceph_make_fpos(fi->frag, fi->next_offset).
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
If directory is fragmented, readdir() read its dirfrags one by one.
After reading all dirfrags, the corresponding dentries are sorted in
(frag_t, off) order in the dcache. If dentries of a directory are all
cached, __dcache_readdir() can use the cached dentries to satisfy
readdir syscall. But when checking if a given dentry is after the
position of readdir, __dcache_readdir() compares numerical value of
frag_t directly. This is wrong, it should use ceph_frag_compare().
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
The merge of commit 7221fe4c2e ("ceph: add acl for cephfs") raced with
upstream changes in the generic POSIX ACL code (eg commit 2aeccbe957
"fs: add generic xattr_acl handlers" and others).
Some of the fallout was fixed in commit 4db658ea0c ("ceph: Fix up after
semantic merge conflict"), but it was incomplete: the set_acl
inode_operation wasn't getting set, and the prototype needed to be
adjusted a bit (it doesn't take a dentry anymore).
Signed-off-by: Sage Weil <sage@inktank.com>
Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some inodes in readdir reply may have no caps. Getattr mds request
for these inodes can return -ESTALE. The fix is consider dentry that
links to inode with no caps as invalid. Invalid dentry causes a
lookup request to send to the mds, the MDS will send caps back.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
If client has outdated directory fragments information, it may request
readdir an non-existent directory fragment. In this case, the MDS finds
an approximate directory fragment and sends its contents back to the
client. When receiving a reply with fragment that is different than the
requested one, the client need to reset the 'readdir offset'.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Linus Torvalds
Andreas Gruenbacher
Kirill A. Shutemov
Geliang Tang
Yan, Zheng
Al Viro
Ilya Dryomov
Sanidhya Kashyap
Nicholas Mc Guire
David Howells
Eric W. Biederman
Yan, Zheng
Sage Weil
Guangliang Zhao