Features include:
- Remove CONFIG_EXPERIMENTAL dependency from NFSv4.1
Aside from the issues discussed at the LKS, distros are shipping
NFSv4.1 with all the trimmings.
- Fix fdatasync()/fsync() for the corner case of a server reboot.
- NFSv4 OPEN access fix: finally distinguish correctly between
open-for-read and open-for-execute permissions in all situations.
- Ensure that the TCP socket is closed when we're in CLOSE_WAIT
- More idmapper bugfixes
- Lots of pNFS bugfixes and cleanups to remove unnecessary state and
make the code easier to read.
- In cases where a pNFS read or write fails, allow the client to
resume trying layoutgets after two minutes of read/write-through-mds.
- More net namespace fixes to the NFSv4 callback code.
- More net namespace fixes to the NFSv3 locking code.
- More NFSv4 migration preparatory patches.
Including patches to detect network trunking in both NFSv4 and NFSv4.1
- pNFS block updates to optimise LAYOUTGET calls.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=uBk7
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Features include:
- Remove CONFIG_EXPERIMENTAL dependency from NFSv4.1
Aside from the issues discussed at the LKS, distros are shipping
NFSv4.1 with all the trimmings.
- Fix fdatasync()/fsync() for the corner case of a server reboot.
- NFSv4 OPEN access fix: finally distinguish correctly between
open-for-read and open-for-execute permissions in all situations.
- Ensure that the TCP socket is closed when we're in CLOSE_WAIT
- More idmapper bugfixes
- Lots of pNFS bugfixes and cleanups to remove unnecessary state and
make the code easier to read.
- In cases where a pNFS read or write fails, allow the client to
resume trying layoutgets after two minutes of read/write-
through-mds.
- More net namespace fixes to the NFSv4 callback code.
- More net namespace fixes to the NFSv3 locking code.
- More NFSv4 migration preparatory patches.
Including patches to detect network trunking in both NFSv4 and
NFSv4.1
- pNFS block updates to optimise LAYOUTGET calls."
* tag 'nfs-for-3.7-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (113 commits)
pnfsblock: cleanup nfs4_blkdev_get
NFS41: send real read size in layoutget
NFS41: send real write size in layoutget
NFS: track direct IO left bytes
NFSv4.1: Cleanup ugliness in pnfs_layoutgets_blocked()
NFSv4.1: Ensure that the layout sequence id stays 'close' to the current
NFSv4.1: Deal with seqid wraparound in the pNFS return-on-close code
NFSv4 set open access operation call flag in nfs4_init_opendata_res
NFSv4.1: Remove the dependency on CONFIG_EXPERIMENTAL
NFSv4 reduce attribute requests for open reclaim
NFSv4: nfs4_open_done first must check that GETATTR decoded a file type
NFSv4.1: Deal with wraparound when updating the layout "barrier" seqid
NFSv4.1: Deal with wraparound issues when updating the layout stateid
NFSv4.1: Always set the layout stateid if this is the first layoutget
NFSv4.1: Fix another refcount issue in pnfs_find_alloc_layout
NFSv4: don't put ACCESS in OPEN compound if O_EXCL
NFSv4: don't check MAY_WRITE access bit in OPEN
NFS: Set key construction data for the legacy upcall
NFSv4.1: don't do two EXCHANGE_IDs on mount
NFS: nfs41_walk_client_list(): re-lock before iterating
...
There's no reason to call rcu_barrier() on every
deactivate_locked_super(). We only need to make sure that all delayed rcu
free inodes are flushed before we destroy related cache.
Removing rcu_barrier() from deactivate_locked_super() affects some fast
paths. E.g. on my machine exit_group() of a last process in IPC
namespace takes 0.07538s. rcu_barrier() takes 0.05188s of that time.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
We want to be able to pass on the information that the page was not
dirtied under a lock. Instead of adding a flag parameter, do this
by passing a pointer to a 'struct nfs_lock_owner' that may be NULL.
Also reuse this structure in struct nfs_lock_context to carry the
fl_owner_t and pid_t.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We want to be able to distinguish between allocation failures, and
the case where the lock context is not needed (because there are no
locks).
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When the NFS_COOKIEVERF helper macro was converted into a static
inline function in commit 99fadcd764 (nfs: convert NFS_*(inode)
helpers to static inline), we broke the initialisation of the
readdir cookies, since that depended on doing a memset with an
argument of 'sizeof(NFS_COOKIEVERF(inode))' which therefore
changed from sizeof(be32 cookieverf[2]) to sizeof(be32 *).
At this point, NFS_COOKIEVERF seems to be more of an obfuscation
than a helper, so the best thing would be to just get rid of it.
Also see: https://bugzilla.kernel.org/show_bug.cgi?id=46881
Reported-by: Andi Kleen <andi@firstfloor.org>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@vger.kernel.org
Merge Andrew's second set of patches:
- MM
- a few random fixes
- a couple of RTC leftovers
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits)
rtc/rtc-88pm80x: remove unneed devm_kfree
rtc/rtc-88pm80x: assign ret only when rtc_register_driver fails
mm: hugetlbfs: close race during teardown of hugetlbfs shared page tables
tmpfs: distribute interleave better across nodes
mm: remove redundant initialization
mm: warn if pg_data_t isn't initialized with zero
mips: zero out pg_data_t when it's allocated
memcg: gix memory accounting scalability in shrink_page_list
mm/sparse: remove index_init_lock
mm/sparse: more checks on mem_section number
mm/sparse: optimize sparse_index_alloc
memcg: add mem_cgroup_from_css() helper
memcg: further prevent OOM with too many dirty pages
memcg: prevent OOM with too many dirty pages
mm: mmu_notifier: fix freed page still mapped in secondary MMU
mm: memcg: only check anon swapin page charges for swap cache
mm: memcg: only check swap cache pages for repeated charging
mm: memcg: split swapin charge function into private and public part
mm: memcg: remove needless !mm fixup to init_mm when charging
mm: memcg: remove unneeded shmem charge type
...
The VM does not like PG_private set on PG_swapcache pages. As suggested
by Trond in http://lkml.org/lkml/2006/8/25/348, this patch disables NFS
data cache revalidation on swap files. as it does not make sense to have
other clients change the file while it is being used as swap. This avoids
setting PG_private on swap pages, since there ought to be no further races
with invalidate_inode_pages2() to deal with.
Since we cannot set PG_private we cannot use page->private which is
already used by PG_swapcache pages to store the nfs_page. Thus augment
the new nfs_page_find_request logic.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Christie <michaelc@cs.wisc.edu>
Cc: Neil Brown <neilb@suse.de>
Cc: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Xiaotian Feng <dfeng@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch exports symbols needed by the v4 module. In addition, I also
switch over to using IS_ENABLED() to check if CONFIG_NFS_V4 or
CONFIG_NFS_V4_MODULE are set.
The module (nfs4.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v4.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch exports symbols and moves over the final structures needed by
the v3 module. In addition, I also switch over to using IS_ENABLED() to
check if CONFIG_NFS_V3 or CONFIG_NFS_V3_MODULE are set.
The module (nfs3.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v3.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The module (nfs2.ko) will be created in the same directory as nfs.ko and
will be automatically loaded the first time you try to mount over NFS v2.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Somehow I missed this in my previous patch series, but these functions
are only needed by the v4 code and should be moved to a v4-only file. I
wasn't exactly sure where I should put these functions, so I moved them
into nfs4super.c where I could make them static.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch adds in the code to track multiple versions of the NFS
protocol. I created default structures for v2, v3 and v4 so that each
version can continue to work while I convert them into kernel modules.
I also removed the const parameter from the rpc_version array so that I
can change it at runtime.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I want to initialize all of NFS v4 in a single function that will
eventually be used as the v4 module init function.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Delegations are a v4 feature, so push return_delegation out of the
generic client by creating a new rpc_op and renaming the old function to
be in the nfs v4 "namespace"
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Delegations are a v4 feature, so push them out of the generic code.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use the same mechanism as the block devices are using, but move the
helper functions from fs/direct-io.c into fs/inode.c to remove the
dependency on CONFIG_BLOCK.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
New features include:
- Rewrite the O_DIRECT code so that it can share the same coalescing and
pNFS functionality as the page cache code.
- Allow the server to provide hints as to when we should use pNFS, and
when it is more efficient to read and write through the metadata
server.
- NFS cache consistency updates:
- Use the ctime to emulate a change attribute for NFSv2/v3 so that
all NFS versions can share the same cache management code.
- New cache management code will only look at the change attribute
and size attribute when deciding whether or not our cached data
is still valid or not.
- Don't request NFSv4 post-op attributes on writes in cases such as
O_DIRECT, where we don't care about data cache consistency, or
when we have a write delegation, and know that our cache is
still consistent.
- Don't request NFSv4 post-op attributes on operations such as
COMMIT, where there are no expected metadata updates.
- Don't request NFSv4 directory post-op attributes in cases where
the operations themselves already return change attribute updates:
i.e. operations such as OPEN, CREATE, REMOVE, LINK and RENAME.
- Speed up 'ls' and friends by using READDIR rather than READDIRPLUS
if we detect no attempts to lookup filenames.
- Improve the code sharing between NFSv2/v3 and v4 mounts
- NFSv4.1 state management efficiency improvements
- More patches in preparation for NFSv4/v4.1 migration functionality.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=suVW
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"New features include:
- Rewrite the O_DIRECT code so that it can share the same coalescing
and pNFS functionality as the page cache code.
- Allow the server to provide hints as to when we should use pNFS,
and when it is more efficient to read and write through the
metadata server.
- NFS cache consistency updates:
* Use the ctime to emulate a change attribute for NFSv2/v3 so that
all NFS versions can share the same cache management code.
* New cache management code will only look at the change attribute
and size attribute when deciding whether or not our cached data
is still valid or not.
* Don't request NFSv4 post-op attributes on writes in cases such as
O_DIRECT, where we don't care about data cache consistency, or
when we have a write delegation, and know that our cache is still
consistent.
* Don't request NFSv4 post-op attributes on operations such as
COMMIT, where there are no expected metadata updates.
* Don't request NFSv4 directory post-op attributes in cases where
the operations themselves already return change attribute
updates: i.e. operations such as OPEN, CREATE, REMOVE, LINK and
RENAME.
- Speed up 'ls' and friends by using READDIR rather than READDIRPLUS
if we detect no attempts to lookup filenames.
- Improve the code sharing between NFSv2/v3 and v4 mounts
- NFSv4.1 state management efficiency improvements
- More patches in preparation for NFSv4/v4.1 migration functionality."
Fix trivial conflict in fs/nfs/nfs4proc.c that was due to the dcache
qstr name initialization changes (that made the length/hash a 64-bit
union)
* tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (146 commits)
NFSv4: Add debugging printks to state manager
NFSv4: Map NFS4ERR_SHARE_DENIED into an EACCES error instead of EIO
NFSv4: update_changeattr does not need to set NFS_INO_REVAL_PAGECACHE
NFSv4.1: nfs4_reset_session should use nfs4_handle_reclaim_lease_error
NFSv4.1: Handle other occurrences of NFS4ERR_CONN_NOT_BOUND_TO_SESSION
NFSv4.1: Handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION in the state manager
NFSv4.1: Handle errors in nfs4_bind_conn_to_session
NFSv4.1: nfs4_bind_conn_to_session should drain the session
NFSv4.1: Don't clobber the seqid if exchange_id returns a confirmed clientid
NFSv4.1: Add DESTROY_CLIENTID
NFSv4.1: Ensure we use the correct credentials for bind_conn_to_session
NFSv4.1: Ensure we use the correct credentials for session create/destroy
NFSv4.1: Move NFSPROC4_CLNT_BIND_CONN_TO_SESSION to the end of the operations
NFSv4.1: Handle NFS4ERR_SEQ_MISORDERED when confirming the lease
NFSv4: When purging the lease, we must clear NFS4CLNT_LEASE_CONFIRM
NFSv4: Clean up the error handling for nfs4_reclaim_lease
NFSv4.1: Exchange ID must use GFP_NOFS allocation mode
nfs41: Use BIND_CONN_TO_SESSION for CB_PATH_DOWN*
nfs4.1: add BIND_CONN_TO_SESSION operation
NFSv4.1 test the mdsthreshold hint parameters
...
Keep track of the number of bytes read or written via buffered, direct, and
mem-mapped i/o for use by mdsthreshold size_io hints.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Simplified error gotos to make it slightly easier to read,
it doesn't affect the functionality of the routine.
Signed-off-by: Matthew Treinish <treinish@linux.vnet.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
After we moved inode_sync_wait() from end_writeback() it doesn't make sense
to call the function end_writeback() anymore. Rename it to clear_inode()
which well says what the function really does - set I_CLEAR flag.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
While the use of READDIRPLUS is significantly more efficient than
READDIR followed by many LOOKUP calls, it is still less efficient
than just READDIR if the attributes are not required.
This patch tracks when lookups are attempted on the directory,
and uses that information to selectively disable READDIRPLUS
on that directory.
The first 'readdir' call is always served using READDIRPLUS.
Subsequent calls only use READDIRPLUS if there was a successful
lookup or revalidation on a child in the mean time.
Credit for the original idea should go to Neil Brown. See:
http://www.spinics.net/lists/linux-nfs/msg19996.html
However, the implementation in this patch differs from Neil's
in that it focuses on tracking lookups rather than calls to
stat().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Neil Brown <neilb@suse.de>
Now that NFSv2 and NFSv3 have simulated change attributes,
instead of using all three of mtime, ctime and change attribute to
manage data cache consistency, we can simplify the code to just use
the change attribute.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the inode is being initialised, there is no point in
setting flags such as NFS_INO_INVALID_ACCESS,
NFS_INO_INVALID_ACL or NFS_INO_INVALID_DATA since there are
no cached access calls, acls or data caches to invalidate.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It is COMMIT that is handled the most differently between
the paged and direct paths. Create a structure that encapsulates
everything either path needs to know about the commit state.
We could use void to hide some of the layout driver stuff, but
Trond suggests pulling it out to ensure type checking, given the
huge changes being made, and the fact that it doesn't interfere
with other drivers.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=G9mT
-----END PGP SIGNATURE-----
Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system
Pull "Disintegrate and delete asm/system.h" from David Howells:
"Here are a bunch of patches to disintegrate asm/system.h into a set of
separate bits to relieve the problem of circular inclusion
dependencies.
I've built all the working defconfigs from all the arches that I can
and made sure that they don't break.
The reason for these patches is that I recently encountered a circular
dependency problem that came about when I produced some patches to
optimise get_order() by rewriting it to use ilog2().
This uses bitops - and on the SH arch asm/bitops.h drags in
asm-generic/get_order.h by a circuituous route involving asm/system.h.
The main difficulty seems to be asm/system.h. It holds a number of
low level bits with no/few dependencies that are commonly used (eg.
memory barriers) and a number of bits with more dependencies that
aren't used in many places (eg. switch_to()).
These patches break asm/system.h up into the following core pieces:
(1) asm/barrier.h
Move memory barriers here. This already done for MIPS and Alpha.
(2) asm/switch_to.h
Move switch_to() and related stuff here.
(3) asm/exec.h
Move arch_align_stack() here. Other process execution related bits
could perhaps go here from asm/processor.h.
(4) asm/cmpxchg.h
Move xchg() and cmpxchg() here as they're full word atomic ops and
frequently used by atomic_xchg() and atomic_cmpxchg().
(5) asm/bug.h
Move die() and related bits.
(6) asm/auxvec.h
Move AT_VECTOR_SIZE_ARCH here.
Other arch headers are created as needed on a per-arch basis."
Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that. We'll find out anything that got broken and fix it..
* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
Delete all instances of asm/system.h
Remove all #inclusions of asm/system.h
Add #includes needed to permit the removal of asm/system.h
Move all declarations of free_initmem() to linux/mm.h
Disintegrate asm/system.h for OpenRISC
Split arch_align_stack() out from asm-generic/system.h
Split the switch_to() wrapper out of asm-generic/system.h
Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
Create asm-generic/barrier.h
Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
Disintegrate asm/system.h for Xtensa
Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
Disintegrate asm/system.h for Tile
Disintegrate asm/system.h for Sparc
Disintegrate asm/system.h for SH
Disintegrate asm/system.h for Score
Disintegrate asm/system.h for S390
Disintegrate asm/system.h for PowerPC
Disintegrate asm/system.h for PA-RISC
Disintegrate asm/system.h for MN10300
...
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it. Performed with the following command:
perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`
Signed-off-by: David Howells <dhowells@redhat.com>
This allows us to turn on/off the dprintk() debugging interfaces for
those distributions that don't ship the 'rpcdebug' utility.
It also allows us to add Kbuild dependencies. Specifically, we already
know that dprintk() in general relies on CONFIG_SYSCTL. Now it turns out
that the NFS dprintks depend on CONFIG_CRC32 after we added support
for the filehandle hash.
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The radix tree is only being used to compile lists of reqs needing commit.
It is simpler to just put the reqs directly into a list.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The check for 'fh == NULL' needs to come _before_ we dereference
fh.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For debugging, introduce a simplistic function to print NFS file
handles on the system console. The main function is hooked into the
dprintk debugging facility, but you can directly call the helper,
_nfs_display_fhandle(), if you want to print a handle unconditionally.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch makes ID's infrastructure network namespace aware. This was done
mainly because of nfs_client_lock, which is desired to be per network
namespace, but protects NFS clients ID's.
NOTE: NFS client's net pointer have to be set prior to ID initialization,
proper assignment was moved.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch splits global list of NFS clients into per-net-ns array of lists.
This looks more strict and clearer.
BTW, this patch also makes "/proc/fs/nfsfs/servers" entry content depends on
/proc mount owner pid namespace. See below for details.
NOTE: few words about how was /proc/fs/nfsfs/ entries content show per network
namespace done. This is a little bit tricky and not the best is could be. But
it's cheap (proper fix for /proc conteinerization is a hard nut to crack).
The idea is simple: take proper network namespace from pid namespace
child reaper nsproxy of /proc/ mount creator.
This actually means, that if there are 2 containers with different net
namespace sharing pid namespace, then read of /proc/fs/nfsfs/ entries will
always return content, taken from net namespace of pid namespace creator task
(and thus second namespace set wil be unvisible).
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch addresses printks that have some context to show that they are
from fs/nfs/, but for the sake of consistency now start with NFS:
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch makes it possible to create NFS program entry ("/proc/net/rpc/nfs")
in passed network namespace context instead of hard-coded "init_net".
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, we will correctly optimise away a truncate that doesn't
change the file size. However, in the case of open(O_TRUNC), we
also want to optimise away the time changes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch implements blocklayout pipe creation and registration per each
existent network namespace.
This was achived by registering NFS per-net operations, responsible for
blocklayout pipe allocation/register and unregister/destruction instead of
initialization and destruction of static "bl_device_pipe" pipe (this one was
removed).
Note, than pointer to network blocklayout pipe is stored in per-net "nfs_net"
structure, because allocating of one more per-net structure for blocklayout
module looks redundant.
This patch also changes dev_remove() function prototype (and all it's callers,
where it' requied) by adding network namespace pointer parameter, which is used
to discover proper blocklayout pipe for rpc_queue_upcall() call.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch implements DNS resolver cache creation and registration for each
alive network namespace context.
This was done by registering NFS per-net operations, responsible for DNS cache
allocation/register and unregister/destructioning instead of initialization and
destruction of static "nfs_dns_resolve" cache detail (this one was removed).
Pointer to network dns resolver cache is stored in new per-net "nfs_net"
structure.
This patch also changes nfs_dns_resolve_name() function prototype (and it's
calls) by adding network pointer parameter, which is used to get proper DNS
resolver cache pointer for do_cache_lookup_wait() call.
Note: empty nfs_dns_resolver_init() and nfs_dns_resolver_destroy() functions
will be used in next patch in the series.
Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
module_param(bool) used to counter-intuitively take an int. In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.
It's time to remove the int/unsigned int option. For this version
it'll simply give a warning, but it'll break next kernel version.
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* 'nfs-for-3.3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Change the default setting of the nfs4_disable_idmapping parameter
NFSv4: Save the owner/group name string when doing open
NFS: Remove pNFS bloat from the generic write path
pnfs-obj: Must return layout on IO error
pnfs-obj: pNFS errors are communicated on iodata->pnfs_error
NFS: Cache state owners after files are closed
NFS: Clean up nfs4_find_state_owners_locked()
NFSv4: include bitmap in nfsv4 get acl data
nfs: fix a minor do_div portability issue
NFSv4.1: cleanup comment and debug printk
NFSv4.1: change nfs4_free_slot parameters for dynamic slots
NFSv4.1: cleanup init and reset of session slot tables
NFSv4.1: fix backchannel slotid off-by-one bug
nfs: fix regression in handling of context= option in NFSv4
NFS - fix recent breakage to NFS error handling.
NFS: Retry mounting NFSROOT
SUNRPC: Clean up the RPCSEC_GSS service ticket requests
* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits)
PM / Hibernate: Implement compat_ioctl for /dev/snapshot
PM / Freezer: fix return value of freezable_schedule_timeout_killable()
PM / shmobile: Allow the A4R domain to be turned off at run time
PM / input / touchscreen: Make st1232 use device PM QoS constraints
PM / QoS: Introduce dev_pm_qos_add_ancestor_request()
PM / shmobile: Remove the stay_on flag from SH7372's PM domains
PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume
PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode
PM: Drop generic_subsys_pm_ops
PM / Sleep: Remove forward-only callbacks from AMBA bus type
PM / Sleep: Remove forward-only callbacks from platform bus type
PM: Run the driver callback directly if the subsystem one is not there
PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers
PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412.
PM / Sleep: Merge internal functions in generic_ops.c
PM / Sleep: Simplify generic system suspend callbacks
PM / Hibernate: Remove deprecated hibernation snapshot ioctls
PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled()
ARM: S3C64XX: Implement basic power domain support
PM / shmobile: Use common always on power domain governor
...
Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused
XBT_FORCE_SLEEP bit
...so that we can do the uid/gid mapping outside the asynchronous RPC
context.
This fixes a bug in the current NFSv4 atomic open code where the client
isn't able to determine what the true uid/gid fields of the file are,
(because the asynchronous nature of the OPEN call denies it the ability
to do an upcall) and so fills them with default values, marking the
inode as needing revalidation.
Unfortunately, in some cases, the VFS will do some additional sanity
checks on the file, and may override the server's decision to allow
the open because it sees the wrong owner/group fields.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else. Not to mention the removal of
boilerplate code from ->destroy_inode() instances...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
No need to duplicate them in both callers; make it return
ERR_PTR(-ENOMEM) on allocation failure instead of NULL and
it'll be able to report rpc_lookup_cred() failures just
fine. Callers are much happier that way...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Allow the freezer to skip wait_on_bit_killable sleeps in the sunrpc
layer. This should allow suspend and hibernate events to proceed, even
when there are RPC's pending on the wire.
Also, wrap the TASK_KILLABLE sleeps in NFS layer in freezer_do_not_count
and freezer_count calls. This allows the freezer to skip tasks that are
sleeping while looping on EJUKEBOX or NFS4ERR_DELAY sorts of errors.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
commit d953126 changed how nfs_atomic_lookup handles an -EISDIR return
from an OPEN call. Prior to that patch, that caused the client to fall
back to doing a normal lookup. When that patch went in, the code began
returning that error to userspace. The d_revalidate codepath however
never had the corresponding change, so it was still possible to end up
with a NULL ctx->state pointer after that.
That patch caused a regression. When we attempt to open a directory that
does not have a cached dentry, that open now errors out with EISDIR. If
you attempt the same open with a cached dentry, it will succeed.
Fix this by reverting the change in nfs_atomic_lookup and allowing
attempts to open directories to fall back to a normal lookup
Also, add a NFSv4-specific f_ops->open routine that just returns
-ENOTDIR. This should never be called if things are working properly,
but if it ever is, then the dprintk may help in debugging.
To facilitate this, a new file_operations field is also added to the
nfs_rpc_ops struct.
Cc: stable@kernel.org
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace remaining direct i_nlink updates with a new set_nlink()
updater function.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Replace direct i_nlink updates with the respective updater function
(inc_nlink, drop_nlink, clear_nlink, inode_dec_link_count).
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Commit 28331a46d8 "Ensure we request the
ordinary fileid when doing readdirplus"
changed the meaning of NFS_ATTR_FATTR_FILEID which used to be set when
FATTR4_WORD1_MOUNTED_ON_FILED was requested.
Allow nfs_fhget to succeed with only a mounted on fileid when crossing
a mountpoint or a referral.
Ask for the fileid of the absent file system if mounted_on_fileid is not
supported.
Signed-off-by: Andy Adamson <andros@netapp.com>
cc:stable@kernel.org [2.6.39]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_update_inode will update isize if there is no queued pages. For pNFS,
layoutcommit is supposed to change file size on server, the same effect as queued
pages. nfs_update_inode may be called when dirty pages are written back (nfsi->npages==0)
but layoutcommit is not sent, and it will change client file size according to server
file size. Then client ends up losing what it just writes back in pNFS path.
So we should skip updating client file size if file needs layoutcommit.
Signed-off-by: Peng Tao <peng_tao@emc.com>
Cc: stable@kernel.org [2.6.39]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv4.1 LAYOUTRETURN implementation
Currently, does not support layout-type payload encoding.
Signed-off-by: Alexandros Batsakis <batsakis@netapp.com>
Signed-off-by: Andy Adamson <andros@citi.umich.edu>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Dean Hildebrand <dhildeb@us.ibm.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Zhang Jingwang <zhangjingwang@nrchpc.ac.cn>
[call pnfs_return_layout right before pnfs_destroy_layout]
[remove assert_spin_locked from pnfs_clear_lseg_list]
[remove wait parameter from the layoutreturn path.]
[remove return_type field from nfs4_layoutreturn_args]
[remove range from nfs4_layoutreturn_args]
[no need to send layoutcommit from _pnfs_return_layout]
[don't wait on sync layoutreturn]
[fix layout stateid in layoutreturn args]
[fixed NULL deref in _pnfs_return_layout]
[removed recaim member of nfs4_layoutreturn_args]
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Hi Trond,
In nfs_update_inode debug output, print the current and new inode
size when the file size changes on the NFS server.
Signed-off-by: Harshula Jayasuriya <harshula@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
A submount may use different security than the parent
mount does. We should figure out what sec flavor the
submount uses at mount time.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Implement all the hooks created in the previous patches.
This requires exporting quite a few functions and adding a few
structure fields.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_opendir() created a context that held much more information than we
need for a readdir. This patch introduces a slimmed-down
nfs_open_dir_context that contains only the cookie and the cred used for
RPC operations. The new context will eventually be used to help detect
readdir loops.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: fix build failure introduced by s/freezeable/freezable/
workqueue: add system_freezeable_wq
rds/ib: use system_wq instead of rds_ib_fmr_wq
net/9p: replace p9_poll_task with a work
net/9p: use system_wq instead of p9_mux_wq
xfs: convert to alloc_workqueue()
reiserfs: make commit_wq use the default concurrency level
ocfs2: use system_wq instead of ocfs2_quota_wq
ext4: convert to alloc_workqueue()
scsi/scsi_tgt_lib: scsi_tgtd isn't used in memory reclaim path
scsi/be2iscsi,qla2xxx: convert to alloc_workqueue()
misc/iwmc3200top: use system_wq instead of dedicated workqueues
i2o: use alloc_workqueue() instead of create_workqueue()
acpi: kacpi*_wq don't need WQ_MEM_RECLAIM
fs/aio: aio_wq isn't used in memory reclaim path
input/tps6507x-ts: use system_wq instead of dedicated workqueue
cpufreq: use system_wq instead of dedicated workqueues
wireless/ipw2x00: use system_wq instead of dedicated workqueues
arm/omap: use system_wq in mailbox
workqueue: use WQ_MEM_RECLAIM instead of WQ_RESCUER
The problem was use of an int32, which when converted to a uint64
is sign extended resulting in a fileid that doesn't fit in 32 bits
even though the intent of the function is to fit the fileid into
32 bits.
Signed-off-by: Frank Filz <ffilzlnx@us.ibm.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
[Trond: Added an include for compat.h]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the call to nfs_wcc_update_inode() results in an attribute update, we
need to ensure that the inode's attr_gencount gets bumped too, otherwise
we are not protected against races with other GETATTR calls.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
WQ_RESCUER is now an internal flag and should only be used in the
workqueue implementation proper. Use WQ_MEM_RECLAIM instead.
This doesn't introduce any functional difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
Make NFS use the new d_automount() dentry operation rather than abusing
follow_link() on directories.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'nfs-for-2.6.38' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (89 commits)
NFS fix the setting of exchange id flag
NFS: Don't use vm_map_ram() in readdir
NFSv4: Ensure continued open and lockowner name uniqueness
NFS: Move cl_delegations to the nfs_server struct
NFS: Introduce nfs_detach_delegations()
NFS: Move cl_state_owners and related fields to the nfs_server struct
NFS: Allow walking nfs_client.cl_superblocks list outside client.c
pnfs: layout roc code
pnfs: update nfs4_callback_recallany to handle layouts
pnfs: add CB_LAYOUTRECALL handling
pnfs: CB_LAYOUTRECALL xdr code
pnfs: change lo refcounting to atomic_t
pnfs: check that partial LAYOUTGET return is ignored
pnfs: add layout to client list before sending rpc
pnfs: serialize LAYOUTGET(openstateid)
pnfs: layoutget rpc code cleanup
pnfs: change how lsegs are removed from layout list
pnfs: change layout state seqlock to a spinlock
pnfs: add prefix to struct pnfs_layout_hdr fields
pnfs: add prefix to struct pnfs_layout_segment fields
...
RCU free the struct inode. This will allow:
- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.
The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.
In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.
The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
This is to prepare the way for sensible io draining. Instead of just
removing the lseg from the list, we instead clear the VALID flag
(preventing new io from grabbing references to the lseg) and remove
the reference holding it in the list. Thus the lseg will be removed
once any io in progress completes and any references still held are
dropped.
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use the small id to pointer translator service to provide a unique callback
identifier per SETCLIENTID call used to identify the v4.0 callback service
associated with the clientid.
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We need to ensure that the entries in the nfs_cache_array get cleared
when the page is removed from the page cache. To do so, we use the
freepage address_space operation.
Change nfs_readdir_clear_array to use kmap_atomic(), so that the
function can be safely called from all contexts.
Finally, modify the cache_page_release helper to call
nfs_readdir_clear_array directly, when dealing with an anonymous
page from 'uncached_readdir'.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
At the start of the io paths, try to grab the relevant layout
information. This will initiate the inode's layout cache, but
stubs ensure the cache stays empty.
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Dean Hildebrand <dhildebz@umich.edu>
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: Tao Guo <guotao@nrchpc.ac.cn>
Signed-off-by: Ricardo Labiaga <ricardo.labiaga@netapp.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Andy Adamson <andros@netapp.com>
Signed-off-by: Fred Isaman <iisaman@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We will now use readdir plus even on directories that are very large.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch creates a new idmapper system that uses the request-key function to
place a call into userspace to map user and group ids to names. The old
idmapper was single threaded, which prevented more than one request from running
at a single time. This means that a user would have to wait for an upcall to
finish before accessing a cached result.
The upcall result is stored on a keyring of type id_resolver. See the file
Documentation/filesystems/nfs/idmapper.txt for instructions.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
[Trond: fix up the return value of nfs_idmap_lookup_name and clean up code]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In nfs_open_revalidate(), if the open_context() call returns an inode that
is not the same as dentry->d_inode, then we will call
put_nfs_open_context() with a valid dentry->d_inode, but without the
context being part of the nfsi->open_files list.
In this case too, we want to just skip the list removal, but we do want to
call the ->close_context() callback in order to close the NFSv4 state.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
inode may be NULL when put_nfs_open_context is called from nfs_atomic_lookup
before d_add_unique(dentry, inode)
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Start moving the 'struct nameidata' dependent code out of the lower level
NFS code in preparation for the removal of open intents.
Instead of the struct nameidata, we pass down a partially initialised
struct nfs_open_context that will be fully initialised by the atomic open
upon success.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
no need for list_for_each_entry_safe()/resetting with superblock list
Fix sget() race with failing mount
vfs: don't hold s_umount over close_bdev_exclusive() call
sysv: do not mark superblock dirty on remount
sysv: do not mark superblock dirty on mount
btrfs: remove junk sb_dirt change
BFS: clean up the superblock usage
AFFS: wait for sb synchronization when needed
AFFS: clean up dirty flag usage
cifs: truncate fallout
mbcache: fix shrinker function return value
mbcache: Remove unused features
add f_flags to struct statfs(64)
pass a struct path to vfs_statfs
update VFS documentation for method changes.
All filesystems that need invalidate_inode_buffers() are doing that explicitly
convert remaining ->clear_inode() to ->evict_inode()
Make ->drop_inode() just return whether inode needs to be dropped
fs/inode.c:clear_inode() is gone
fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
...
Fix up trivial conflicts in fs/nilfs2/super.c
If the server has given us a delegation on a file, we _know_ that we can
cache the attribute information even when the user has specified 'noac'.
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFS Filehandles and struct fattr are really too large to be allocated on
the stack. This patch adds in a couple of helper functions to allocate them
dynamically instead.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
If the NFS_INO_REVAL_FORCED flag is set, that means that we don't yet have
an up to date attribute cache. Even if we hold a delegation, we must
put a GETATTR on the wire.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org
Now that we have correct COMMIT semantics in writeback_single_inode, we can
reduce and simplify nfs_wb_all(). Also replace nfs_wb_nocommit() with a
call to filemap_write_and_wait(), which doesn't need to hold the
inode->i_mutex.
With that done, we can eliminate nfs_write_mapping() altogether.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In order to know when we should do opportunistic commits of the unstable
writes, when the VM is doing a background flush, we add a field to count
the number of unstable writes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The sole purpose of nfs_write_inode is to commit unstable writes, so
move it into fs/nfs/write.c, and make nfs_commit_inode static.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This gives the filesystem more information about the writeback that
is happening. Trond requested this for the NFS unstable write handling,
and other filesystems might benefit from this too by beeing able to
distinguish between the different callers in more detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Similar to the fsync issue fixed a while ago in commit
2daea67e96 we need to write for data to
actually hit the disk before writing out the metadata to guarantee
data integrity for filesystems that modify the inode in the data I/O
completion path. Currently XFS and NFS handle this manually, and AFS
has a write_inode method that does nothing but waiting for data, while
others are possibly missing out on this.
Fortunately this change has a lot less impact than the fsync change
as none of the write_inode methods starts data writeout of any form
by itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
For NFSv2 and v3:
O_DIRECT writes are always synchronous, and aren't cached, so nothing
should be flushed when closing an NFS O_DIRECT file descriptor. Thus
there are no write errors to report on close(2).
In addition, there's no cached data to verify on the next open(2),
so we don't need clean GETATTR results at close time to compare with.
Thus, there's no need for the nfs_revalidate_inode() call when closing
an NFS O_DIRECT file. This reduces the number of synchronous
on-the-wire requests for a simple open-write-close of an NFS O_DIRECT
file by roughly 20%.
For NFSv4:
Call nfs4_do_close() with wait set to zero when closing an NFS
O_DIRECT file. The CLOSE will go on the wire, but the application
won't wait for it to complete.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the NFS_ATTR_FATTR_TYPE field isn't set in fattr->valid, then we should
not set the S_IFMT part of inode->i_mode.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Update some fs code to make use of new helper functions introduced
in the previous patch. Should be no significant change in behaviour
(except CIFS now calls send_sig under i_lock, via inode_newsize_ok).
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: linux-nfs@vger.kernel.org
Cc: Trond.Myklebust@netapp.com
Cc: linux-cifs-client@lists.samba.org
Cc: sfrench@samba.org
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The NFSv4 and NFSv4.1 protocols both allow for the redirection of a client
from one server to another in order to support filesystem migration and
replication. For full protocol support, we need to add the ability to
convert a DNS host name into an IP address that we can feed to the RPC
client.
We'll reuse the sunrpc cache, now that it has been converted to work with
rpc_pipefs.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the NFSv4 server doesn't support a POSIX attribute, the generic NFS code
needs to know that, so that it don't keep trying to poll for it.
However, by the same count, if the NFSv4 server does support that
attribute, then we should ensure that the inode metadata is appropriately
labelled as being untrusted. For instance, if we don't know the correct
value of the file's uid, we should certainly not be caching ACLs or ACCESS
results.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT
This will make hardirq.h inclusion cheaper for every PREEMPT=n config
(which includes allmodconfig/allyesconfig, BTW)
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bind data storage objects in the local cache to NFS inodes.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
Register NFS for caching and retrieve the top-level cache index object cookie.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
Close-to-open cache consistency rules really only require us to flush out
writes on calls to close(), and require us to revalidate attributes on the
very last close of the file.
Currently we appear to be doing a lot of extra attribute revalidation
and cache flushes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The following patch is a combination of a patch by myself and Peter
Staubach.
Trond: If we allow other processes to dirty pages while a process is doing
a consistency sync to disk, we can end up never making progress.
Peter: Attached is a patch which addresses a continuing problem with
the NFS client generating out of order WRITE requests. While
this is compliant with all of the current protocol
specifications, there are servers in the market which can not
handle out of order WRITE requests very well. Also, this may
lead to sub-optimal block allocations in the underlying file
system on the server. This may cause the read throughputs to
be reduced when reading the file from the server.
Peter: There has been a lot of work recently done to address out of
order issues on a systemic level. However, the NFS client is
still susceptible to the problem. Out of order WRITE
requests can occur when pdflush is in the middle of writing
out pages while the process dirtying the pages calls
generic_file_buffered_write which calls
generic_perform_write which calls
balance_dirty_pages_rate_limited which ends up calling
writeback_inodes which ends up calling back into the NFS
client to writes out dirty pages for the same file that
pdflush happens to be working with.
Signed-off-by: Peter Staubach <staubach@redhat.com>
[modification by Trond to merge the two similar patches]
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, filling struct nfs_fattr is more or less an all or nothing
operation, since NFSv2 and NFSv3 have only mandatory attributes.
In NFSv4, some attributes are optional, and so we may simply not be able to
fill in those fields. Furthermore, NFSv4 allows you to specify which
attributes you are interested in retrieving, thus permitting you to
optimise away retrieval of attributes that you know will no change...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If cached directory contents becomes incorrect, there is no way to
flush the contents. This contrasts with files where file locking is
the recommended way to ensure cache consistency between multiple
applications (a read-lock always flushes the cache).
Also while changes to files often change the size of the file (thus
triggering a cache flush), changes to directories often do not change
the apparent size (as the size is often rounded to a block size).
So it is particularly important with directories to avoid the
possibility of an incorrect cache wherever possible.
When the link count on a directory changes it implies a change in the
number of child directories, and so a change in the contents of this
directory. So use that as a trigger to flush cached contents.
When the ctime changes but the mtime does not, there are two possible
reasons.
1/ The owner/mode information has been changed.
2/ utimes has been used to set the mtime backwards.
In the first case, a data-cache flush is not required.
In the second case it is.
So on the basis that correctness trumps performance, flush the
directory contents cache in this case also.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove redundant NFS_STALE() check, a leftover due to the commit
691beb13cd
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Hi.
I've been looking at a bugzilla which describes a problem where
a customer was advised to use either the "noac" or "actimeo=0"
mount options to solve a consistency problem that they were
seeing in the file attributes. It turned out that this solution
did not work reliably for them because sometimes, the local
attribute cache was believed to be valid and not timed out.
(With an attribute cache timeout of 0, the cache should always
appear to be timed out.)
In looking at this situation, it appears to me that the problem
is that the attribute cache timeout code has an off-by-one
error in it. It is assuming that the cache is valid in the
region, [read_cache_jiffies, read_cache_jiffies + attrtimeo]. The
cache should be considered valid only in the region,
[read_cache_jiffies, read_cache_jiffies + attrtimeo). With this
change, the options, "noac" and "actimeo=0", work as originally
expected.
This problem was previously addressed by special casing the
attrtimeo == 0 case. However, since the problem is only an off-
by-one error, the cleaner solution is address the off-by-one
error and thus, not require the special case.
Thanx...
ps
Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The most important property we need from nfs_attr_generation_counter is
monotonicity, which is not guaranteed by the current system of smp memory
barriers. We should convert it to an atomic_long_t, and drop the memory
barriers.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The cache_change_attribute is used to decide whether or not a directory has
changed, in which case we may need to look it up again. Again, the use of
'jiffies' leads to an issue of resolution.
Once again, the fix is to change nfs_inode->cache_change_attribute, and
just make it a simple counter.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
It appears that 'jiffies' timestamps do not have high enough resolution for
nfs_inode_attrs_need_update(). One problem is that a GETATTR can be
launched within < 1 jiffy of the last operation that updated the attribute.
Another problem is that RPC calls can take < 1 jiffy to execute.
We can fix this by switching the variables to use a simple global counter
that gets incremented every time we start another GETATTR call.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This fixes a regression seen when running the Connectathon testsuite
against an ext3 filesystem. The reason was that the inode was constantly
being marked as 'just updated' by the jiffy wraparound test.
This again meant that newer GETATTR calls were failing to pass the
nfs_inode_attrs_need_update() test unless the changes caused a ctime update
on the server, since they were perceived as having been started before the
latest inode update.
Given that nfs_inode_attrs_need_update() already checks for wraparound
of nfsi->last_updated, we can drop the buggy "protection" in
nfs_update_inode().
Also make a slight micro-optimisation of nfs_inode_attrs_need_update(): we
are more often going to see time_after(fattr->time_start, nfsi->last_updated)
be true, rather than seeing an update of ctime/size, so put that test
first to ensure that we optimise away the ctime/size tests.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, if two processes are both trying to revalidate metadata for the
same inode, they will find themselves being serialised. There is no good
justification for this now that we have improved our ability to detect
stale attribute data, so we should remove that serialisation.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we're merely checking the inode attributes because we suspect that the
'updated' attributes returned by the RPC call are stale, then we shouldn't
be doing weak cache consistency updates or clearing the cache_validity
flags.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In the case where there are parallel RPC calls to the same inode, we may
receive stale metadata due to the lack of ordering, hence the sanity
checking of metadata in nfs_refresh_inode().
Currently, __nfs_revalidate_inode() is calling nfs_update_inode() directly,
without any further sanity checks, and hence may end up setting the inode
up with stale metadata.
Fix is to use nfs_refresh_inode() instead of nfs_update_inode().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If we believe that the attributes are old (see nfs_refresh_inode()), then
we shouldn't force an update.
Also ensure that we hold the inode->i_lock across attribute checks and the
call to nfs_refresh_inode_locked() to ensure that we don't race with other
attribute updates.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently nfs_refresh_inode() will only update the inode metadata if it
sees that the RPC call that returned the nfs_fattr was started
after the last update of the inode. This means that if we have parallel
RPC calls to the same inode (when sending WRITE calls, for instance), we
may often miss updates.
This patch attempts to recover those missed updates by also accepting
them if the ctime in the nfs_fattr is more recent than the inode's
cached ctime.
It also recovers the case where the file size has increased, but the
ctime has not been updated due to limited ctime resolution.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Try to avoid taking and dropping the inode->i_lock more than once. Do so by
moving the code in nfs_refresh_inode() that needs to be done under the
spinlock into a function nfs_refresh_inode_locked(), and then having both
nfs_refresh_inode() and nfs_post_op_update_inode() call it directly.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Kmem cache passed to constructor is only needed for constructors that are
themselves multiplexeres. Nobody uses this "feature", nor does anybody uses
passed kmem cache in non-trivial way, so pass only pointer to object.
Non-trivial places are:
arch/powerpc/mm/init_64.c
arch/powerpc/mm/hugetlbpage.c
This is flag day, yes.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Matt Mackall <mpm@selenic.com>
[akpm@linux-foundation.org: fix arch/powerpc/mm/hugetlbpage.c]
[akpm@linux-foundation.org: fix mm/slab.c]
[akpm@linux-foundation.org: fix ubifs]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The main problem is dealing with inode->i_size: we need to set the
inode->i_lock on all attribute updates, and so vmtruncate won't cut it.
Make an NFS-private version of vmtruncate that has the necessary locking
semantics.
The result should be that the following inode attribute updates are
protected by inode->i_lock
nfsi->cache_validity
nfsi->read_cache_jiffies
nfsi->attrtimeo
nfsi->attrtimeo_timestamp
nfsi->change_attr
nfsi->last_updated
nfsi->cache_change_attribute
nfsi->access_cache
nfsi->access_cache_entry_lru
nfsi->access_cache_inode_lru
nfsi->acl_access
nfsi->acl_default
nfsi->nfs_page_tree
nfsi->ncommit
nfsi->npages
nfsi->open_files
nfsi->silly_list
nfsi->acl
nfsi->open_states
inode->i_size
inode->i_atime
inode->i_mtime
inode->i_ctime
inode->i_nlink
inode->i_uid
inode->i_gid
The following is protected by dir->i_mutex
nfsi->cookieverf
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
ftruncate() access checking is supposed to be performed at open() time,
just like reads and writes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Here are some more places where path_{get,put}() can be used instead of
dput()/mntput() pair.
Signed-off-by: Jan Blunck <jblunck@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Both the 'noac' and 'actimeo=0' mount options should ensure that attributes
are not cached, however a bug in nfs_attribute_timeout() means that
currently, the attributes may in fact get cached for up to one jiffy. This
has been seen to cause corruption in some applications.
The reason for the bug is that the time_in_range() test returns 'true' as
long as the current time lies between nfsi->read_cache_jiffies and
nfsi->read_cache_jiffies + nfsi->attrtimeo. In other words, if jiffies
equals nfsi->read_cache_jiffies, then we still cache the attribute data.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The nfs_open_context struct had a "flags" field added recently, but the
allocator isn't initializing it. It also looks like the allocator isn't
initializing the mode or list either, but they seem to be overwritten
by the caller, so that's less of an issue.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The NFSv4 protocol allows clients to negotiate security protocols on the
fly in the case where an administrator on the server changes the export
settings and/or in the case where we may have a filesystem migration event.
Instead of having the NFS client code cache credentials that are tied to a
particular AUTH method it is therefore preferable to have a generic credential
that can be converted into whatever AUTH is in use by the RPC client when
the read/write/sillyrename/... is put on the wire.
We do this by means of the new "generic" credential, which basically just
caches the minimal information that is needed to look up an RPCSEC_GSS,
AUTH_SYS, or AUTH_NULL credential.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
When we detect that we've crossed a mountpoint on the remote server, we
must take care not to use that inode to revalidate the fsid on our
current superblock. To do so, we label the inode as a remote mountpoint,
and check for that in nfs_update_inode().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFS post-rpciod cleanups often involve tasks that cannot be safely
performed within the rpciod context (due to deadlock concerns). We
therefore add a dedicated NFS workqueue that can perform tasks like
cleaning up state after an interrupted NFSv4 open() call, or calling
put_nfs_open_context() after an asynchronous read or write call.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We can't allow rpc callback functions like task->tk_ops->rpc_call_prepare()
and task->tk_ops->rpc_call_done() to call mntput() in any way, since
that will cause a deadlock when the call to rpc_shutdown_client() attempts
to wait on 'task' to complete.
We can avoid the above deadlock by moving calls to mntput to
task->tk_ops->rpc_release() callback, since at that time the task will be
marked as completed, and so rpc_shutdown_client won't attempt to wait on
it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* 'task_killable' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc: (22 commits)
Remove commented-out code copied from NFS
NFS: Switch from intr mount option to TASK_KILLABLE
Add wait_for_completion_killable
Add wait_event_killable
Add schedule_timeout_killable
Use mutex_lock_killable in vfs_readdir
Add mutex_lock_killable
Use lock_page_killable
Add lock_page_killable
Add fatal_signal_pending
Add TASK_WAKEKILL
exit: Use task_is_*
signal: Use task_is_*
sched: Use task_contributes_to_load, TASK_ALL and TASK_NORMAL
ptrace: Use task_is_*
power: Use task_is_*
wait: Use TASK_NORMAL
proc/base.c: Use task_is_*
proc/array.c: Use TASK_REPORT
perfmon: Use task_is_*
...
Fixed up conflicts in NFS/sunrpc manually..
Otherwise, there is a potential deadlock if the last dput() from an NFSv4
close() or other asynchronous operation leads to nfs_clear_inode calling
the synchronous delegreturn.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
POSIX requires that ctime and mtime, as reported by the stat(2) call,
reflect the activity of the most recent write(2). To that end, nfs_getattr()
flushes pending dirty writes to a file before doing a GETATTR to allow the
NFS server to set the file's size, ctime, and mtime properly.
However, nfs_getattr() can be starved when a constant stream of application
writes to a file prevents nfs_wb_nocommit() from completing. This usually
results in hangs of programs doing a stat against an NFS file that is being
written. "ls -l" is a common victim of this behavior.
To prevent starvation, hold the file's i_mutex in nfs_getattr() to
freeze applications writes temporarily so the client can more quickly obtain
clean values for a file's size, mtime, and ctime.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The nfs_wcc_update_inode() function omits logic to convert the type of
the NFS on-the-wire value of a file's size (__u64) to the type of file
size value stored in struct inode (loff_t, which is signed).
Everywhere else in the NFS client I checked already correctly converts the
file size type.
This effects only very large files.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
By using the TASK_KILLABLE infrastructure, we can get rid of the 'intr'
mount option. We have to use _killable everywhere instead of _interruptible
as we get rid of rpc_clnt_sigmask/sigunmask.
Signed-off-by: Liam R. Howlett <howlett@gmail.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Otherwise, we do end up breaking close-to-open semantics. We also end up
breaking some of the silly-rename tests in Connectathon on some setups.
Please refer to the bug-report at
http://bugzilla.linux-nfs.org/show_bug.cgi?id=150
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
lookup() and sillyrename() can race one another because the sillyrename()
completion cannot take the parent directory's inode->i_mutex since the
latter may be held by whoever is calling dput().
We therefore have little option but to add extra locking to ensure that
nfs_lookup() and nfs_atomic_open() do not race with the sillyrename
completion.
If somebody has looked up the sillyrenamed file in the meantime, we just
transfer the sillydelete information to the new dentry.
Please refer to the bug-report at
http://bugzilla.linux-nfs.org/show_bug.cgi?id=150
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the ATTR_KILL_S*ID bits are set then any mode change is only for clearing
the setuid/setgid bits. For NFS, skip the mode change and let the server
handle it.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Slab constructors currently have a flags parameter that is never used. And
the order of the arguments is opposite to other slab functions. The object
pointer is placed before the kmem_cache pointer.
Convert
ctor(void *object, struct kmem_cache *s, unsigned long flags)
to
ctor(struct kmem_cache *s, void *object)
throughout the kernel
[akpm@linux-foundation.org: coupla fixes]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This boot parameter will allow legacy 32-bit applications which call stat()
to continue to function even if the NFSv3/v4 server uses 64-bit inode
numbers.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If the cached attributes match the ones supplied in the fattr, then assume
we've revalidated the inode.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We're failing basic test6 against Linux servers because they lack a correct
change attribute. The fix is to assume that we always want to invalidate
the readdir caches when we call update_changeattr and/or
nfs_post_op_update_inode on a directory.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
- NFS_READTIME, NFS_CHANGE_ATTR are completely unused.
- Inline the few remaining uses of NFS_ATTRTIMEO, and remove.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The lower level routines in fs/nfs/proc.c, fs/nfs/nfs3proc.c and
fs/nfs/nfs4proc.c should already be dealing with the revalidation issues.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
If nfs_post_op_update_inode fails because the server didn't return any
attributes, then we let the subsequent inode revalidation update
cache_change_attribute.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The attribute revalidation code will already have taken care of resetting
nfsi->cache_change_attribute.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv2 and v4 don't offer weak cache consistency attributes on WRITE calls.
In NFSv3, returning wcc data is optional. In all cases, we want to prevent
the client from invalidating our cached data whenever ->write_done()
attempts to update the inode attributes.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Remove the bogus 'data_stable' check in nfs_update_inode. The
cache_change_attribute tells you if the directory changed on the server,
and should have nothing to do with the file length.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
For one thing, the test NFS_ATTRTIMEO() == 0 makes no sense: we're
testing whether or not the cache timeout length is zero, which is totally
unrelated to the issue of whether or not we trust the file staleness.
Secondly, we do not want to retry the GETATTR once a file has been declared
stale by the server: we rather want to discard that inode as soon as
possible, since there are broken servers still in use out there that reuse
filehandles on new files.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFSv3 will correctly update atime on a readdir call, so there is no need to
set the NFS_INO_INVALID_ATIME flag unless the call to nfs_refresh_inode()
fails.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The reason is that if the weak cache consistency update was successful,
then we know that our client must be the only one that changed the
directory, and we've already updated the dcache to reflect the change.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We must ensure that the readdir data is always invalidated whether or not
the weak cache consistency data update succeeds.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't need to force a dentry lookup just because we're making changes to
the directory.
Don't update nfsi->cache_change_attribute in nfs_end_data_update: that
overrides the NFSv3/v4 weak consistency checking that tells us our update
was the only one, and that tells us the dcache is still valid.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We always want to check that the verifier and directory
cache_change_attribute match. This also allows us to remove the 'wraparound
hack' for the cache_change_attribute. If we're only checking for equality,
then we don't care about wraparound issues.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I would like to discuss the idea that the current checks for attribute
timeout using time_after are inadequate for 32bit architectures, since
time_after works correctly only when the two timestamps being compared
are within 2^31 jiffies of each other. The signed overflow caused by
comparing values more than 2^31 jiffies apart will flip the result,
causing incorrect assumptions of validity.
2^31 jiffies is a fairly large period of time (~25 days) when compared
to the lifetime of most kernel data structures, but for long lived NFS
mounts that can sit idle for months (think that for some reason autofs
cannot be used), it is easy to compare inode attribute timestamps with
very disparate or even bogus values (as in when jiffies have wrapped
many times, where the comparison doesn't even make sense).
Currently the code tests for attribute timeout by simply adding the
desired amount of jiffies to the stored timestamp and comparing that
with the current timestamp of obtained attribute data with time_after.
This is incorrect, as it returns true for the desired timeout period
and another full 2^31 range of jiffies.
In testing with artificial jumps (several small jumps, not one big
crank) of the jiffies I was able to reproduce a problem found in a
server with very long lived NFS mounts, where attributes would not be
refreshed even after touching files and directories in the server:
Initial uptime:
03:42:01 up 6 min, 0 users, load average: 0.01, 0.12, 0.07
NFS volume is mounted and time is advanced:
03:38:09 up 25 days, 2 min, 0 users, load average: 1.22, 1.05, 1.08
# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r-- 1 root root 0 Dec 17 03:38 /local/A/foo/bar
-rw-r--r-- 1 root root 0 Nov 22 00:36 /nfs/A/foo/bar
# touch /local/A/foo/bar
# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r-- 1 root root 0 Dec 17 03:47 /local/A/foo/bar
-rw-r--r-- 1 root root 0 Nov 22 00:36 /nfs/A/foo/bar
We can see the local mtime is updated, but the NFS mount still shows
the old value. The patch below makes it work:
Initial setup...
07:11:02 up 25 days, 1 min, 0 users, load average: 0.15, 0.03, 0.04
# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r-- 1 root root 0 Jan 11 07:11 /local/A/foo/bar
-rw-r--r-- 1 root root 0 Jan 11 07:11 /nfs/A/foo/bar
# touch /local/A/foo/bar
# ls -l /local/A/foo/bar /nfs/A/foo/bar
-rw-r--r-- 1 root root 0 Jan 11 07:14 /local/A/foo/bar
-rw-r--r-- 1 root root 0 Jan 11 07:14 /nfs/A/foo/bar
Signed-off-by: Fabio Olive Leite <fleite@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Hi.
Attached is a patch to modify the NFS client code to support
64 bit ino's, as appropriate for the system and the NFS
protocol version.
The code basically just expand the NFS interfaces for routines
which handle ino's from using ino_t to u64 and then uses the
fileid in the nfs_inode instead of i_ino in the inode. The
code paths that were updated are in the getattr method and
the readdir methods.
This should be no real change on 64 bit platforms. Since
the ino_t is an unsigned long, it would already be 64 bits
wide.
Thanx...
ps
Signed-off-by: Peter Staubach <staubach@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The only user of nfs_sync_mapping_range() is nfs_getattr(), which uses it
to flush out the entire inode without sending a commit. We therefore
replace nfs_sync_mapping_range with a more appropriate helper.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We need to grab the inode->i_lock atomically with the last reference put in
order to remove the open context that is being freed from the
nfsi->open_files list.
Fix by converting the kref to a standard atomic counter and then using
atomic_dec_and_lock()...
Thanks to Arnd Bergmann for pointing out the problem.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.
This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Currently we force a synchronous call to __nfs_revalidate_inode() in
nfs_inode_set_delegation(). This not only ensures that we cannot call
nfs_inode_set_delegation from an asynchronous context, but it also slows
down any call to open().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There is no justification for keeping a special spinlock for the exclusive
use of the NFS writeback code.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't need to revalidate the fsid on the root directory. It suffices to
revalidate it on the current directory.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs4_do_close() does not currently have any way to ensure that the user
won't attempt to unmount the partition while the asynchronous RPC call
is completing. This again may cause Oopses in nfs_update_inode().
Add a vfsmount argument to nfs4_close_state to ensure that the partition
remains mounted while we're closing the file.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.
This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
getting them indirectly
Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
they don't need sched.h
b) sched.h stops being dependency for significant number of files:
on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
after patch it's only 3744 (-8.3%).
Cross-compile tested on
all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
alpha alpha-up
arm
i386 i386-up i386-defconfig i386-allnoconfig
ia64 ia64-up
m68k
mips
parisc parisc-up
powerpc powerpc-up
s390 s390-up
sparc sparc-up
sparc64 sparc64-up
um-x86_64
x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig
as well as my two usual configs.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Steven French <sfrench@us.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Cc: Anton Altaparmakov <aia21@cantab.net>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@ucw.cz>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by
SLAB.
I think its purpose was to have a callback after an object has been freed
to verify that the state is the constructor state again? The callback is
performed before each freeing of an object.
I would think that it is much easier to check the object state manually
before the free. That also places the check near the code object
manipulation of the object.
Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was
compiled with SLAB debugging on. If there would be code in a constructor
handling SLAB_DEBUG_INITIAL then it would have to be conditional on
SLAB_DEBUG otherwise it would just be dead code. But there is no such code
in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real
use of, difficult to understand and there are easier ways to accomplish the
same effect (i.e. add debug code before kfree).
There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be
clear in fs inode caches. Remove the pointless checks (they would even be
pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors.
This is the last slab flag that SLUB did not support. Remove the check for
unimplemented flags from SLUB.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It looks like nfs_setattr() and nfs_rename() also need to test whether the
target is a regular file before calling nfs_wb_all()...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Looks like we need a check in nfs_getattr() for a regular file. It makes
no sense to call nfs_sync_mapping_range() on anything else. I think that
should fix your problem: it will stop the NFS client from interfering
with dirty pages on that inode's mapping.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix wraparound issue with nfsi->cache_change_attribute. If it is found
to lie in the future, then update it to lie in the past. Patch based on
a suggestion by Neil Brown.
..and minor micro-optimisation: avoid reading 'jiffies' more than once in
nfs_update_inode().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prevent the call to invalidate_inode_pages2() from racing with file writes
by taking the inode->i_mutex across the page cache flush and invalidate.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change all the uses of f_{dentry,vfsmnt} to f_path.{dentry,mnt} in the nfs
client code.
Signed-off-by: Josef "Jeff" Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace all uses of kmem_cache_t with struct kmem_cache.
The patch was generated using the following script:
#!/bin/sh
#
# Replace one string by another in all the kernel sources.
#
set -e
for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
quilt add $file
sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
mv /tmp/$$ $file
quilt refresh
done
The script was run like this
sh replace kmem_cache_t "struct kmem_cache"
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
SLAB_KERNEL is an alias of GFP_KERNEL.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The "!inode" check in __nfs_revalidate_inode() occurs well after the first
time it is dereferenced, so get rid of it.
Coverity: #cid 1372, 1373
Test plan:
Code review; recheck with Coverity.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If invalidate_inode_pages2() fails, then it should in principle just be
because the current process was signalled. In that case, we just want to
ensure that the inode's page cache remains marked as invalid.
Also add a helper to allow the O_DIRECT code to simply mark the page cache as
invalid once it is finished writing, instead of calling
invalidate_inode_pages2() itself.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This eliminates the i_blksize field from struct inode. Filesystems that want
to provide a per-inode st_blksize can do so by providing their own getattr
routine instead of using the generic_fillattr() function.
Note that some filesystems were providing pretty much random (and incorrect)
values for i_blksize.
[bunk@stusta.de: cleanup]
[akpm@osdl.org: generic_fillattr() fix]
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Rougly half of callers already do it by not checking return value
* Code in drivers/acpi/osl.c does the following to be sure:
(void)kmem_cache_destroy(cache);
* Those who check it printk something, however, slab_error already printed
the name of failed cache.
* XFS BUGs on failed kmem_cache_destroy which is not the decision
low-level filesystem driver should make. Converted to ignore.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Comments-only change to clarify a detail of the NFS protocol and how it is
implemented in Linux.
Test plan:
None.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
And slight optimisation of nfs_end_data_update(): directories never have
delegations anyway.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make two new proc files available:
/proc/fs/nfsfs/servers
/proc/fs/nfsfs/volumes
The first lists the servers with which we are currently dealing (struct
nfs_client), and the second lists the volumes we have on those servers (struct
nfs_server).
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The attached patch makes NFS share superblocks between mounts from the same
server and FSID over the same protocol.
It does this by creating each superblock with a false root and returning the
real root dentry in the vfsmount presented by get_sb(). The root dentry set
starts off as an anonymous dentry if we don't already have the dentry for its
inode, otherwise it simply returns the dentry we already have.
We may thus end up with several trees of dentries in the superblock, and if at
some later point one of anonymous tree roots is discovered by normal filesystem
activity to be located in another tree within the superblock, the anonymous
root is named and materialises attached to the second tree at the appropriate
point.
Why do it this way? Why not pass an extra argument to the mount() syscall to
indicate the subpath and then pathwalk from the server root to the desired
directory? You can't guarantee this will work for two reasons:
(1) The root and intervening nodes may not be accessible to the client.
With NFS2 and NFS3, for instance, mountd is called on the server to get
the filehandle for the tip of a path. mountd won't give us handles for
anything we don't have permission to access, and so we can't set up NFS
inodes for such nodes, and so can't easily set up dentries (we'd have to
have ghost inodes or something).
With this patch we don't actually create dentries until we get handles
from the server that we can use to set up their inodes, and we don't
actually bind them into the tree until we know for sure where they go.
(2) Inaccessible symbolic links.
If we're asked to mount two exports from the server, eg:
mount warthog:/warthog/aaa/xxx /mmm
mount warthog:/warthog/bbb/yyy /nnn
We may not be able to access anything nearer the root than xxx and yyy,
but we may find out later that /mmm/www/yyy, say, is actually the same
directory as the one mounted on /nnn. What we might then find out, for
example, is that /warthog/bbb was actually a symbolic link to
/warthog/aaa/xxx/www, but we can't actually determine that by talking to
the server until /warthog is made available by NFS.
This would lead to having constructed an errneous dentry tree which we
can't easily fix. We can end up with a dentry marked as a directory when
it should actually be a symlink, or we could end up with an apparently
hardlinked directory.
With this patch we need not make assumptions about the type of a dentry
for which we can't retrieve information, nor need we assume we know its
place in the grand scheme of things until we actually see that place.
This patch reduces the possibility of aliasing in the inode and page caches for
inodes that may be accessed by more than one NFS export. It also reduces the
number of superblocks required for NFS where there are many NFS exports being
used from a server (home directory server + autofs for example).
This in turn makes it simpler to do local caching of network filesystems, as it
can then be guaranteed that there won't be links from multiple inodes in
separate superblocks to the same cache file.
Obviously, cache aliasing between different levels of NFS protocol could still
be a problem, but at least that gives us another key to use when indexing the
cache.
This patch makes the following changes:
(1) The server record construction/destruction has been abstracted out into
its own set of functions to make things easier to get right. These have
been moved into fs/nfs/client.c.
All the code in fs/nfs/client.c has to do with the management of
connections to servers, and doesn't touch superblocks in any way; the
remaining code in fs/nfs/super.c has to do with VFS superblock management.
(2) The sequence of events undertaken by NFS mount is now reordered:
(a) A volume representation (struct nfs_server) is allocated.
(b) A server representation (struct nfs_client) is acquired. This may be
allocated or shared, and is keyed on server address, port and NFS
version.
(c) If allocated, the client representation is initialised. The state
member variable of nfs_client is used to prevent a race during
initialisation from two mounts.
(d) For NFS4 a simple pathwalk is performed, walking from FH to FH to find
the root filehandle for the mount (fs/nfs/getroot.c). For NFS2/3 we
are given the root FH in advance.
(e) The volume FSID is probed for on the root FH.
(f) The volume representation is initialised from the FSINFO record
retrieved on the root FH.
(g) sget() is called to acquire a superblock. This may be allocated or
shared, keyed on client pointer and FSID.
(h) If allocated, the superblock is initialised.
(i) If the superblock is shared, then the new nfs_server record is
discarded.
(j) The root dentry for this mount is looked up from the root FH.
(k) The root dentry for this mount is assigned to the vfsmount.
(3) nfs_readdir_lookup() creates dentries for each of the entries readdir()
returns; this function now attaches disconnected trees from alternate
roots that happen to be discovered attached to a directory being read (in
the same way nfs_lookup() is made to do for lookup ops).
The new d_materialise_unique() function is now used to do this, thus
permitting the whole thing to be done under one set of locks, and thus
avoiding any race between mount and lookup operations on the same
directory.
(4) The client management code uses a new debug facility: NFSDBG_CLIENT which
is set by echoing 1024 to /proc/net/sunrpc/nfs_debug.
(5) Clone mounts are now called xdev mounts.
(6) Use the dentry passed to the statfs() op as the handle for retrieving fs
statistics rather than the root dentry of the superblock (which is now a
dummy).
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move the rpc_ops from the nfs_server struct to the nfs_client struct as they're
common to all server records of a particular NFS protocol version.
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The current access cache only allows one entry at a time to be cached for each
inode. Add a per-inode red-black tree in order to allow more than one to
be cached at a time.
Should significantly cut down the time spent in path traversal for shared
directories such as ${PATH}, /usr/share, etc.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Builds on ARM report link problems with common configurations like
statically linked NFS (for nfsroot). The symptom is that __init
section code references __exit section code; that won't work since
the exit sections are discarded (since they can never be called).
The best fix for these particular cases would be an "__init_or_exit"
section annotation.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Fix various problems with nfs4 disabled. And various other things.
In file included from fs/nfs/inode.c:50:
fs/nfs/internal.h:24: error: static declaration of 'nfs_do_refmount' follows non-static declaration
include/linux/nfs_fs.h:320: error: previous declaration of 'nfs_do_refmount' was here
fs/nfs/internal.h:65: warning: 'struct nfs4_fs_locations' declared inside parameter list
fs/nfs/internal.h:65: warning: its scope is only this definition or declaration, which is probably not what you want
fs/nfs/internal.h: In function 'nfs4_path':
fs/nfs/internal.h:97: error: 'struct nfs_server' has no member named 'mnt_path'
fs/nfs/inode.c: In function 'init_once':
fs/nfs/inode.c:1116: error: 'struct nfs_inode' has no member named 'open_states'
fs/nfs/inode.c:1116: error: 'struct nfs_inode' has no member named 'delegation'
fs/nfs/inode.c:1116: error: 'struct nfs_inode' has no member named 'delegation_state'
fs/nfs/inode.c:1116: error: 'struct nfs_inode' has no member named 'rwsem'
distcc[26452] ERROR: compile fs/nfs/inode.c on g5/64 failed
make[1]: *** [fs/nfs/inode.o] Error 1
make: *** [fs/nfs/inode.o] Error 2
make: *** Waiting for unfinished jobs....
In file included from fs/nfs/nfs3xdr.c:26:
fs/nfs/internal.h:24: error: static declaration of 'nfs_do_refmount' follows non-static declaration
include/linux/nfs_fs.h:320: error: previous declaration of 'nfs_do_refmount' was here
fs/nfs/internal.h:65: warning: 'struct nfs4_fs_locations' declared inside parameter list
fs/nfs/internal.h:65: warning: its scope is only this definition or declaration, which is probably not what you want
fs/nfs/internal.h: In function 'nfs4_path':
fs/nfs/internal.h:97: error: 'struct nfs_server' has no member named 'mnt_path'
distcc[26486] ERROR: compile fs/nfs/nfs3xdr.c on g5/64 failed
make[1]: *** [fs/nfs/nfs3xdr.o] Error 1
make: *** [fs/nfs/nfs3xdr.o] Error 2
In file included from fs/nfs/nfs3proc.c:24:
fs/nfs/internal.h:24: error: static declaration of 'nfs_do_refmount' follows non-static declaration
include/linux/nfs_fs.h:320: error: previous declaration of 'nfs_do_refmount' was here
fs/nfs/internal.h:65: warning: 'struct nfs4_fs_locations' declared inside parameter list
fs/nfs/internal.h:65: warning: its scope is only this definition or declaration, which is probably not what you want
fs/nfs/internal.h: In function 'nfs4_path':
fs/nfs/internal.h:97: error: 'struct nfs_server' has no member named 'mnt_path'
distcc[26469] ERROR: compile fs/nfs/nfs3proc.c on bix/32 failed
make[1]: *** [fs/nfs/nfs3proc.o] Error 1
make: *** [fs/nfs/nfs3proc.o] Error 2
**FAILED**
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andreas Gruenbacher <agruen@suse.de>
Cc: Andy Adamson <andros@citi.umich.edu>
Cc: Chuck Lever <cel@netapp.com>
Cc: David Howells <dhowells@redhat.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Manoj Naik <manoj@almaden.ibm.com>
Cc: Marc Eshel <eshel@almaden.ibm.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
As fs/nfs/inode.c is rather large, heterogenous and unwieldy, the attached
patch splits it up into a number of files:
(*) fs/nfs/inode.c
Strictly inode specific functions.
(*) fs/nfs/super.c
Superblock management functions for NFS and NFS4, normal access, clones
and referrals. The NFS4 superblock functions _could_ move out into a
separate conditionally compiled file, but it's probably not worth it as
there're so many common bits.
(*) fs/nfs/namespace.c
Some namespace-specific functions have been moved here.
(*) fs/nfs/nfs4namespace.c
NFS4-specific namespace functions (this could be merged into the previous
file). This file is conditionally compiled.
(*) fs/nfs/internal.h
Inter-file declarations, plus a few simple utility functions moved from
fs/nfs/inode.c.
Additionally, all the in-.c-file externs have been moved here, and those
files they were moved from now includes this file.
For the most part, the functions have not been changed, only some multiplexor
functions have changed significantly.
I've also:
(*) Added some extra banner comments above some functions.
(*) Rearranged the function order within the files to be more logical and
better grouped (IMO), though someone may prefer a different order.
(*) Reduced the number of #ifdefs in .c files.
(*) Added missing __init and __exit directives.
Signed-Off-By: David Howells <dhowells@redhat.com>
Respond to a moved error on NFS lookup by setting up the referral.
Note: We don't actually follow the referral during lookup/getattr, but
later when we detect fsid mismatch in inode revalidation (similar to the
processing done for cloning submounts). Referrals will have fake attributes
until they are actually followed or traversed.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Set up mountpoint when hitting a referral on moved error by getting
fs_locations.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Move existing code into a separate function so that it can be also used by
referral code.
Signed-off-by: Manoj Naik <manoj@almaden.ibm.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Make automounted partitions expire using the mark_mounts_for_expiry()
function. The timeout is controlled via a sysctl.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This should enable us to detect if we are crossing a mountpoint in the
case where the server is exporting "nohide" mounts.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Allow filesystems to decide to perform pre-umount processing whether or not
MNT_FORCE is set.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that we have a real nfs_invalidate_page() to ensure that
truncate_inode_pages() does the right thing when there are pending dirty
pages, we can get rid of nfs_delete_inode().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, we are accounting for all calls to nfs_revalidate_inode(), but not
to nfs_revalidate_mapping(), or nfs_lookup_verify_inode(), etc...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Separate out the function of revalidating the inode metadata, and
revalidating the mapping. The former may be called by lookup(),
and only really needs to check that permissions, ctime, etc haven't changed
whereas the latter needs only done when we want to read data from the page
cache, and may need to sync and then invalidate the mapping.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Fix up a bug in the handling of NFS_INO_REVAL_PAGECACHE: make sure that
nfs_update_inode() clears it when we're sure we're not racing with other
updates.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The Linux NFSv4 server violates RFC3530 in that the change attribute is not
guaranteed to be updated for every change to the inode. Our optimisation
for checking whether or not the inode metadata has changed or not is broken
too. Grr....
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Convert a for-loop that explicitly references "NR_CPUS" into the
potentially more efficient for_each_possible_cpu() construct.
Signed-off-by: John Hawkes <hawkes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
* git://git.linux-nfs.org/pub/linux/nfs-2.6: (103 commits)
SUNRPC,RPCSEC_GSS: spkm3--fix config dependencies
SUNRPC,RPCSEC_GSS: spkm3: import contexts using NID_cast5_cbc
LOCKD: Make nlmsvc_traverse_shares return void
LOCKD: nlmsvc_traverse_blocks return is unused
SUNRPC,RPCSEC_GSS: fix krb5 sequence numbers.
NFSv4: Dont list system.nfs4_acl for filesystems that don't support it.
SUNRPC,RPCSEC_GSS: remove unnecessary kmalloc of a checksum
SUNRPC: Ensure rpc_call_async() always calls tk_ops->rpc_release()
SUNRPC: Fix memory barriers for req->rq_received
NFS: Fix a race in nfs_sync_inode()
NFS: Clean up nfs_flush_list()
NFS: Fix a race with PG_private and nfs_release_page()
NFSv4: Ensure the callback daemon flushes signals
SUNRPC: Fix a 'Busy inodes' error in rpc_pipefs
NFS, NLM: Allow blocking locks to respect signals
NFS: Make nfs_fhget() return appropriate error values
NFSv4: Fix an oops in nfs4_fill_super
lockd: blocks should hold a reference to the nlm_file
NFSv4: SETCLIENTID_CONFIRM should handle NFS4ERR_DELAY/NFS4ERR_RESOURCE
NFSv4: Send the delegation stateid for SETATTR calls
...
Rewrap the overly long source code lines resulting from the previous
patch's addition of the slab cache flag SLAB_MEM_SPREAD. This patch
contains only formatting changes, and no function change.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mark file system inode and similar slab caches subject to SLAB_MEM_SPREAD
memory spreading.
If a slab cache is marked SLAB_MEM_SPREAD, then anytime that a task that's
in a cpuset with the 'memory_spread_slab' option enabled goes to allocate
from such a slab cache, the allocations are spread evenly over all the
memory nodes (task->mems_allowed) allowed to that task, instead of favoring
allocation on the node local to the current cpu.
The following inode and similar caches are marked SLAB_MEM_SPREAD:
file cache
==== =====
fs/adfs/super.c adfs_inode_cache
fs/affs/super.c affs_inode_cache
fs/befs/linuxvfs.c befs_inode_cache
fs/bfs/inode.c bfs_inode_cache
fs/block_dev.c bdev_cache
fs/cifs/cifsfs.c cifs_inode_cache
fs/coda/inode.c coda_inode_cache
fs/dquot.c dquot
fs/efs/super.c efs_inode_cache
fs/ext2/super.c ext2_inode_cache
fs/ext2/xattr.c (fs/mbcache.c) ext2_xattr
fs/ext3/super.c ext3_inode_cache
fs/ext3/xattr.c (fs/mbcache.c) ext3_xattr
fs/fat/cache.c fat_cache
fs/fat/inode.c fat_inode_cache
fs/freevxfs/vxfs_super.c vxfs_inode
fs/hpfs/super.c hpfs_inode_cache
fs/isofs/inode.c isofs_inode_cache
fs/jffs/inode-v23.c jffs_fm
fs/jffs2/super.c jffs2_i
fs/jfs/super.c jfs_ip
fs/minix/inode.c minix_inode_cache
fs/ncpfs/inode.c ncp_inode_cache
fs/nfs/direct.c nfs_direct_cache
fs/nfs/inode.c nfs_inode_cache
fs/ntfs/super.c ntfs_big_inode_cache_name
fs/ntfs/super.c ntfs_inode_cache
fs/ocfs2/dlm/dlmfs.c dlmfs_inode_cache
fs/ocfs2/super.c ocfs2_inode_cache
fs/proc/inode.c proc_inode_cache
fs/qnx4/inode.c qnx4_inode_cache
fs/reiserfs/super.c reiser_inode_cache
fs/romfs/inode.c romfs_inode_cache
fs/smbfs/inode.c smb_inode_cache
fs/sysv/inode.c sysv_inode_cache
fs/udf/super.c udf_inode_cache
fs/ufs/super.c ufs_inode_cache
net/socket.c sock_inode_cache
net/sunrpc/rpc_pipe.c rpc_inode_cache
The choice of which slab caches to so mark was quite simple. I marked
those already marked SLAB_RECLAIM_ACCOUNT, except for fs/xfs, dentry_cache,
inode_cache, and buffer_head, which were marked in a previous patch. Even
though SLAB_RECLAIM_ACCOUNT is for a different purpose, it marks the same
potentially large file system i/o related slab caches as we need for memory
spreading.
Given that the rule now becomes "wherever you would have used a
SLAB_RECLAIM_ACCOUNT slab cache flag before (usually the inode cache), use
the SLAB_MEM_SPREAD flag too", this should be easy enough to maintain.
Future file system writers will just copy one of the existing file system
slab cache setups and tend to get it right without thinking.
Signed-off-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove a
duplicate of ARRAY_SIZE. Some trailing whitespaces are also deleted.
Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Cc: David Howells <dhowells@redhat.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Neil Brown <neilb@cse.unsw.edu.au>
Cc: Chris Mason <mason@suse.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nathan Scott <nathans@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The meaning of MS_VERBOSE is backwards; if the bit is set, it really means,
"don't be verbose". This is confusing and counter-intuitive.
In addition, there is also no way to set the MS_VERBOSE flag in the
mount(8) program in util-linux, but interesting, it does define options
which would do the right thing if MS_SILENT were defined, which
unfortunately we do not:
#ifdef MS_SILENT
{ "quiet", 0, 0, MS_SILENT }, /* be quiet */
{ "loud", 0, 1, MS_SILENT }, /* print out messages. */
#endif
So the obvious fix is to deprecate the use of MS_VERBOSE and replace it
with MS_SILENT.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Kudos to Neil Brown for spotting the problem:
"in nfs_sync_inode, there is effectively the sequence:
nfs_wait_on_requests
nfs_flush_inode
nfs_commit_inode
This seems a bit racy to me as if the only requests are on the
->commit list, and nfs_commit_inode is called separately after
nfs_wait_on_requests completes, and before nfs_commit_inode start
(say: by nfs_write_inode) then none of these function will return
>0, yet there will be some pending request that aren't waited for."
The solution is to search for requests to wait upon, search for dirty
requests, and search for uncommitted requests while holding the
nfsi->req_lock
The patch also cleans up nfs_sync_inode(), getting rid of the redundant
FLUSH_WAIT flag. It turns out that we were always setting it.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently it returns NULL, which usually gets interpreted as ENOMEM. In
fact it can mean a host of issues.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The mount statistics patches introduced a call to nfs_free_iostats that is
not only redundant, but actually causes an oops.
Also fix a memory leak due to the lack of a call to nfs_free_iostats on
unmount.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Linus Torvalds
Kirill A. Shutemov
Trond Myklebust
Mel Gorman
Bryan Schumaker
Andy Adamson
Matthew Treinish
Jan Kara
Fred Isaman
David Howells
Weston Andros Adamson
Chuck Lever
Stanislav Kinsbursky
Rusty Russell
Al Viro
Jeff Layton
Miklos Szeredi
Peng Tao
Benny Halevy
Harshula Jayasuriya
Frank Filz
Tejun Heo
Nick Piggin
Christoph Hellwig
npiggin@suse.de
Alexey Dobriyan
NeilBrown
Suresh Jayaraman
Peter Staubach
Alan Cox
Jan Blunck
Harvey Harrison
Matthew Wilcox
Christoph Lameter
Fabio Olive Leite
Paul Mundt
Jesper Juhl
Trond Myklebust
Josef "Jeff" Sipek
Theodore Ts'o
Panagiotis Issaris
Jörn Engel
David Brownell
Andrew Morton
Manoj Naik
John Hawkes
Linus Torvalds
Paul Jackson
Tobias Klauser