There are a few remaining drivers/staging/*/Makefile files that do not
have SPDX identifiers in them. Add the correct GPL-2.0 identifier to
them to make scanning tools happy.
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few remaining drivers/staging/*/Kconfig files that do not
have SPDX identifiers in them. Add the correct GPL-2.0 identifier to
them to make scanning tools happy.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch tests the return of devm_kzalloc for failure and
improves the code.
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes space after a cast as it
is not needed.
Issue found by checkpatch.
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of reimplement afunction to do 'dt_node_to_map' task like
'rt2880_pinctrl_dt_node_to_map' make use of 'pinconf_generic_dt_node_to_map_all'
generic function for this task. Also use its equivalent function for free which
is 'pinconf_generic_dt_free_map'. Remove 'rt2880_pinctrl_dt_node_to_map' function
which is not needed anymore. This decrease a bit driver LOC and make it more
generic. To properly compile this changes 'GENERIC_PINCONF' option is selected
with the driver in its Kconfig file.
This also fix a problem with function 'rt2880_pinctrl_dt_node_to_map' which was
calling internally 'pinctrl_utils_reserve_map' which expects 'num_maps' to be initialized.
It does a memory allocation based on the value, and triggers the following
warning if is not properly set:
if (unlikely(order >= MAX_ORDER)) {
WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN));
return NULL;
}
Generic function 'pinconf_generic_dt_node_to_map_all' initializes properly
'num_maps' to zero fixing the problem.
Fixes: e12a1a6e08 ("staging: mt7621-pinctrl: refactor rt2880_pinctrl_dt_node_to_map function")
Reported-by: NeilBrown <neil@brown.name>
Tested-by: NeilBrown <neil@brown.name>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the for_each_node_with_property loop us incrementing variable
ngroups however it was not initialized and hence will contain garbage.
Fix this by initializing ngroups to zero.
Detected with static analysis with cppcheck:
drivers/staging/mt7621-pinctrl/pinctrl-rt2880.c:89]: (error) Uninitialized
variable: ngroups
Fixes: e12a1a6e08 ("staging: mt7621-pinctrl: refactor rt2880_pinctrl_dt_node_to_map function")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
That patch causes the network interface on the device to stop working.
device_initcall() is called much later than core_initcall_sync() and
that seem to be a problem. Revert it to get a correct behaviour.
Reported-by: NeilBrown <neil@brown.name>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pinctrl_utils_reserve_map() calls krealloc() on *map. Because of this
*map need to be initialized to NULL before calling it.
Fixes: 62b6215c11 ("staging: mt7621-pinctrl: make use of pinctrl_utils_reserve_map")
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't really need initialization of this at such an early stage.
Just use builtin_platform_driver to initialize this driver.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The debug information provided by this function does not make
sense at all, so just remove it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trivial change to have only one return in 'rt2880_get_group_name'
function using a ternary operator instead of an if statement and
two returns.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using 'function' and 'group' bindings in the device tree give the
posibility of refactor 'rt2880_pinctrl_dt_node_to_map' and simplify
it a lot. Make use of 'for_each_node_with_property' function to count
number of groups for the node and iterate over the groups using
'of_property_for_each_string' calling 'pinctrl_utils_add_map_mux'
function which is the same of the custom function in this driver code
'rt2880_pinctrl_dt_subnode_to_map' which is not needed anymore.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function rt2880_pinctrl_dt_node_to_map was using 'kzalloc' to
reserve map memory. There is a 'pinctrl_utils_reserve_map' to
do this function. Just use it.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Struct 'rt2880_priv' contains a field 'gpio' which is defined
as uint8_t and should be defined with 'u8' which is preferred.
Update some cast along the code related with this new change.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was a custom 'rt2880_pinctrl_dt_free_map' function which
it was doing the same as pinctrl_utils_free_map defined in
'pinctrl-utils.h' header file. Use it instead avoiding
code duplications.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kernel coding style use tabs for indent code instead of spaces.
Fix some places where spaces were being used silencing also
checkpatch script complains.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Function parameters along the code has different alignment styles.
Just unify all of them making style consistent.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For a constant format without additional arguments, use seq_puts()
instead of seq_printf() fixing also the following checkpatch.pl
warning: 'Prefer seq_puts to seq_printf'
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adding spaces between if condition and parenthesis are not
needed at all and checkpatch script complains about them.
Fix one in driver code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit replaces ENOSYS return with ENOTSUPP silencing the
following checkpatch warning:
WARNING: ENOSYS means 'invalid syscall nr' and nothing else
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Messages when memory allocation fails are not needed at all
and checkpatch script complains about them. Remove one in this
driver code.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit replaces all 'unsigned' type declarations along
the driver code in favour of the preferred one 'unsigned int'.
This also silence checkpatch script warnings about this issue.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's good to have SPDX identifiers in driver files to make it easier to
audit the kernel tree for correct licenses.
Fix up the one of staging mt7621-pinctrl file to have a proper SPDX
identifier, based on the license text in the file itself. The SPDX
identifier is a legally binding shorthand, which can be used instead of
the full boiler plate text.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the owner assignment form the platform driver as
platform_driver_register() already initializes the owner.
Found using coccinelle.
Signed-off-by: Christian Lütke-Stetzkamp <christian@lkamp.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman
Nishad Kamdar
Sergio Paracuellos
Colin Ian King
Kees Cook
Christian Lütke-Stetzkamp
John Crispin