Clearing out report id and timestamp as means to detect unlanded reports
only works if report size is power of 2. That is, only when report size is
a sub-multiple of the OA buffer size can we be certain that reports will
land at the same place each time in the OA buffer (after rewind). If report
size is not a power of 2, we need to zero out the entire report to be able
to detect unlanded reports reliably.
v2: Add Fixes tag (Umesh)
Fixes: 1cc064dce4 ("drm/i915/perf: Add support for OA media units")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523204042.4180641-1-ashutosh.dixit@intel.com
(cherry picked from commit 09a36015d9)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Failure ladders weren't exactly unwinding what the function had done up
to that point; most seriously, when we encountered an already offloaded
rule, the failure path tried to remove the new rule from the hashtable,
which would in fact remove the already-present 'old' rule (since it has
the same key) from the table, and leak its resources.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202305200745.xmIlkqjH-lkp@intel.com/
Fixes: d902e1a737 ("sfc: bare bones TC offload on EF100")
Fixes: 17654d84b4 ("sfc: add offloading of 'foreign' TC (decap) rules")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230530202527.53115-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During driver load it reads embedded_cpu bit from initialization
segment, but the initialization segment is readable only after
initialization bit is cleared.
Move the call to mlx5_read_embedded_cpu() right after initialization bit
cleared.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Fixes: 591905ba96 ("net/mlx5: Introduce Mellanox SmartNIC and modify page management logic")
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Allocation failure is outside the critical lock section and should
return immediately rather than jumping to the unlock section.
Also unlock as soon as required and remove the now redundant jump label.
Fixes: 80a2a9026b ("net/mlx5e: Add a lock on tir list")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When dynamic IRQ allocation is not supported all IRQs are allocated up
front in mlx5_irq_table_create() instead of dynamically as part of
mlx5_irq_alloc(). In the latter dynamic case irq->map.index is set
via the mapping returned by pci_msix_alloc_irq_at(). In the static case
and prior to commit 1da438c0ae ("net/mlx5: Fix indexing of mlx5_irq")
irq->map.index was set in mlx5_irq_alloc() twice once initially to 0 and
then to the requested index before storing in the xarray. After this
commit it is only set to 0 which breaks all other IRQ mappings.
Fix this by setting irq->map.index to the requested index together with
irq->map.virq and improve the related comment to make it clearer which
cases it deals with.
Cc: Chuck Lever III <chuck.lever@oracle.com>
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Fixes: 1da438c0ae ("net/mlx5: Fix indexing of mlx5_irq")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add IP GC 11.0.1 in the list of target to have
tmz enabled by default.
Signed-off-by: Ikshwaku Chauhan <ikshwaku.chauhan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
-----BEGIN PGP SIGNATURE-----
iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAmR3nmkACgkQiiy9cAdy
T1ELQwv/c8V2oHalMYKQAdrQ9CpsXnEmdBoiv5QGfWpczkNOLy2OO6zRyauVd9gW
yxT3YQvemkQbrIwo4IBTsmE/2o0Z3rJYZfgFffNev9yg8QgCMFrHbKQ74Cm7zQcZ
La8UQTjC0AdcvMcTKCw3Y8ZMvu/V+6caK679kAnplhQ92uw3cUrOkc+y9nGeVsyp
CLLtgwJWMD/h30kBwSzeQR8AL7bNKCgxUAnOW2Q/8pOLVcbujExgYOxXSzEM8KxA
XWbIbB5H+9FJRTR4nq2yjHVFJiG61Dt07FaFQaXQuDb8EbyrG8SHJTocYnjRSOUj
PirKqkF8GxwSqfMNRhQnIT4VMvfyGRk25E/Snwic96NrSyDL7a4jmktDrG/5Fo6a
GfEdxpxFvjOMg3kf6MuMkd8SIH0o+drRRXqW23YyqY30mg/fNYJhHg9opizbJYip
IR4MMLCFIiH1IYGugzGOm6t9Wb6EEHuw6GkJixGoWuM/bnSxdkEVAKHT4F8A5CFU
m4FFrWtX
=UVOh
-----END PGP SIGNATURE-----
Merge tag '6.4-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
"Four small smb3 client fixes:
- two small fixes suggested by kernel test robot
- small cleanup fix
- update Paulo's email address in the maintainer file"
* tag '6.4-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: address unused variable warning
smb: delete an unnecessary statement
smb3: missing null check in SMB2_change_notify
smb3: update a reviewer email in MAINTAINERS file
Separate jpegbRAS poison consumption handling from the instance irq, and
register dedicated ras_poison_irq src and funcs for UVD_POISON.
v2:
- Separate ras irq from jpeg instance irq
- Improve the subject and code comments
v3:
- Split the patch into three parts
- Improve the code comments
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Separate vcn RAS poison consumption handling from the instance irq, and
register dedicated ras_poison_irq src and funcs for UVD_POISON.
v2:
- Separate ras irq from vcn instance irq
- Improve the subject and code comments
v3:
- Split the patch into three parts
- Improve the code comments
Suggested-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit ce560ac402.
It depends on its parent commit, which we want to revert.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
[Hamza: fix a whitespace issue in dcn30_prepare_bandwidth()]
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk for renoir.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels are
given the reversed orders by PMFW. Like the memory DPM clocks
that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch reverses the DPM clocks levels output of pp_dpm_mclk.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch reverses the DPM clocks levels output of pp_dpm_mclk
and pp_dpm_fclk.
On dGPUs and older APUs we expose the levels from lowest clocks
to highest clocks. But for some APUs, the clocks levels that from
the DFPstateTable are given the reversed orders by PMFW. Like the
memory DPM clocks that are exposed by pp_dpm_mclk.
It's not intuitive that they are reversed on these APUs. All tools
and software that talks to the driver then has to know different ways
to interpret the data depending on the asic.
So we need to reverse them to expose the clocks levels from the
driver consistently.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Until commit 5c2712387d ("cacheinfo: Fix LLC is not exported through
sysfs"), cacheinfo called populate_cache_leaves() for CPU coming online
which let the arch specific functions handle (at least on x86)
populating the shared_cpu_map. However, with the changes in the
aforementioned commit, populate_cache_leaves() is not called when a CPU
comes online as a result of hotplug since last_level_cache_is_valid()
returns true as the cacheinfo data is not discarded. The CPU coming
online is not present in shared_cpu_map, however, it will not be added
since the cpu_cacheinfo->cpu_map_populated flag is set (it is set in
populate_cache_leaves() when cacheinfo is first populated for x86)
This can lead to inconsistencies in the shared_cpu_map when an offlined
CPU comes online again. Example below depicts the inconsistency in the
shared_cpu_list in cacheinfo when CPU8 is offlined and onlined again on
a 3rd Generation EPYC processor:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# echo 1 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8
# cat /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list
136
# cat /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list
9-15,136-143
Clear the flag when the CPU is removed from shared_cpu_map when
cache_shared_cpu_map_remove() is called during CPU hotplug. This will
allow cache_shared_cpu_map_setup() to add the CPU coming back online in
the shared_cpu_map. Set the flag again when the shared_cpu_map is setup.
Following are results of performing the same test as described above with
the changes:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# echo 1 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# cat /sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list
8,136
# cat /sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list
8-15,136-143
Fixes: 5c2712387d ("cacheinfo: Fix LLC is not exported through sysfs")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230508084115.1157-3-kprateek.nayak@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While building the shared_cpu_map, check if the cache level and cache
type matches. On certain systems that build the cache topology based on
the instance ID, there are cases where the same ID may repeat across
multiple cache levels, leading inaccurate topology.
In event of CPU offlining, the cache_shared_cpu_map_remove() does not
consider if IDs at same level are being compared. As a result, when same
IDs repeat across different cache levels, the CPU going offline is not
removed from all the shared_cpu_map.
Below is the output of cache topology of CPU8 and it's SMT sibling after
CPU8 is offlined on a dual socket 3rd Generation AMD EPYC processor
(2 x 64C/128T) running kernel release v6.3:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143
CPU8 is removed from index0 (L1i) but remains in the shared_cpu_list of
index1 (L1d) and index2 (L2). Since L1i, L1d, and L2 are shared by the
SMT siblings, and they have the same cache instance ID, CPU 2 is only
removed from the first index with matching ID which is index1 (L1i) in
this case. With this fix, the results are as expected when performing
the same experiment on the same system:
# for i in /sys/devices/system/cpu/cpu8/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu8/cache/index0/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index1/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index2/shared_cpu_list: 8,136
/sys/devices/system/cpu/cpu8/cache/index3/shared_cpu_list: 8-15,136-143
# echo 0 > /sys/devices/system/cpu/cpu8/online
# for i in /sys/devices/system/cpu/cpu136/cache/index*/shared_cpu_list; do echo -n "$i: "; cat $i; done
/sys/devices/system/cpu/cpu136/cache/index0/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index1/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index2/shared_cpu_list: 136
/sys/devices/system/cpu/cpu136/cache/index3/shared_cpu_list: 9-15,136-143
When rebuilding topology, the same problem appears as
cache_shared_cpu_map_setup() implements a similar logic. Consider the
same 3rd Generation EPYC processor: CPUs in Core 1, that share the L1
and L2 caches, have L1 and L2 instance ID as 1. For all the CPUs on
the second chiplet, the L3 ID is also 1 leading to grouping on CPUs from
Core 1 (1, 17) and the entire second chiplet (8-15, 24-31) as CPUs
sharing one cache domain. This went undetected since x86 processors
depended on arch specific populate_cache_leaves() method to repopulate
the shared_cpus_map when CPU came back online until kernel release
v6.3-rc5.
Fixes: 198102c910 ("cacheinfo: Fix shared_cpu_map to handle shared caches at different levels")
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20230508084115.1157-2-kprateek.nayak@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter spotted that test_fw_config->reqs will be leaked if
trigger_batched_requests_store() is called two or more times.
The same appears with trigger_batched_requests_async_store().
This bug wasn't trigger by the tests, but observed by Dan's visual
inspection of the code.
The recommended workaround was to return -EBUSY if test_fw_config->reqs
is already allocated.
Fixes: 7feebfa487 ("test_firmware: add support for request_firmware_into_buf")
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Tianfei Zhang <tianfei.zhang@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org # v5.4
Suggested-by: Dan Carpenter <error27@gmail.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230509084746.48259-2-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter spotted a race condition in a couple of situations like
these in the test_firmware driver:
static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
{
u8 val;
int ret;
ret = kstrtou8(buf, 10, &val);
if (ret)
return ret;
mutex_lock(&test_fw_mutex);
*(u8 *)cfg = val;
mutex_unlock(&test_fw_mutex);
/* Always return full write size even if we didn't consume all */
return size;
}
static ssize_t config_num_requests_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int rc;
mutex_lock(&test_fw_mutex);
if (test_fw_config->reqs) {
pr_err("Must call release_all_firmware prior to changing config\n");
rc = -EINVAL;
mutex_unlock(&test_fw_mutex);
goto out;
}
mutex_unlock(&test_fw_mutex);
rc = test_dev_config_update_u8(buf, count,
&test_fw_config->num_requests);
out:
return rc;
}
static ssize_t config_read_fw_idx_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return test_dev_config_update_u8(buf, count,
&test_fw_config->read_fw_idx);
}
The function test_dev_config_update_u8() is called from both the locked
and the unlocked context, function config_num_requests_store() and
config_read_fw_idx_store() which can both be called asynchronously as
they are driver's methods, while test_dev_config_update_u8() and siblings
change their argument pointed to by u8 *cfg or similar pointer.
To avoid deadlock on test_fw_mutex, the lock is dropped before calling
test_dev_config_update_u8() and re-acquired within test_dev_config_update_u8()
itself, but alas this creates a race condition.
Having two locks wouldn't assure a race-proof mutual exclusion.
This situation is best avoided by the introduction of a new, unlocked
function __test_dev_config_update_u8() which can be called from the locked
context and reducing test_dev_config_update_u8() to:
static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
{
int ret;
mutex_lock(&test_fw_mutex);
ret = __test_dev_config_update_u8(buf, size, cfg);
mutex_unlock(&test_fw_mutex);
return ret;
}
doing the locking and calling the unlocked primitive, which enables both
locked and unlocked versions without duplication of code.
The similar approach was applied to all functions called from the locked
and the unlocked context, which safely mitigates both deadlocks and race
conditions in the driver.
__test_dev_config_update_bool(), __test_dev_config_update_u8() and
__test_dev_config_update_size_t() unlocked versions of the functions
were introduced to be called from the locked contexts as a workaround
without releasing the main driver's lock and thereof causing a race
condition.
The test_dev_config_update_bool(), test_dev_config_update_u8() and
test_dev_config_update_size_t() locked versions of the functions
are being called from driver methods without the unnecessary multiplying
of the locking and unlocking code for each method, and complicating
the code with saving of the return value across lock.
Fixes: 7feebfa487 ("test_firmware: add support for request_firmware_into_buf")
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tianfei Zhang <tianfei.zhang@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org # v5.4
Suggested-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/20230509084746.48259-1-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There was a bug where this code forgot to unlock the tdev->mutex if the
kzalloc() failed. Fix this issue, by moving the allocation outside the
lock.
Fixes: 2d1e952a2b ("mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Small rc bug fixes:
- Fix 64K ARM page size support in bnxt_re and efa
- bnxt_re fixes for a memory leak, incorrect error handling and a remove a
bogus FW failure when running on a VF
- Update MAINTAINERS for hns and efa
- Fix two rxe regressions added this merge window in error unwind and
incorrect spinlock primitives
- hns gets a better algorithm for allocating page tables to avoid running
out of resources, and a timeout adjustment
- Fix a text case failure in hns
- Use after free in irdma and fix incorrect construction of a WQE causing
mis-execution
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZHd8IwAKCRCFwuHvBreF
YYOFAQDkEWwKF1+L+vvI0Do6gTPEb1D5KDRl3uasl4AAVl66UgEA8UulKNiZF/iJ
L9NS8M4C/7WPMtPNFty3QjtSK5BXkwg=
=FCJZ
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- Fix 64K ARM page size support in bnxt_re and efa
- bnxt_re fixes for a memory leak, incorrect error handling and a
remove a bogus FW failure when running on a VF
- Update MAINTAINERS for hns and efa
- Fix two rxe regressions added this merge window in error unwind and
incorrect spinlock primitives
- hns gets a better algorithm for allocating page tables to avoid
running out of resources, and a timeout adjustment
- Fix a text case failure in hns
- Use after free in irdma and fix incorrect construction of a WQE
causing mis-execution
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Fix Local Invalidate fencing
RDMA/irdma: Prevent QP use after free
MAINTAINERS: Update maintainer of Amazon EFA driver
RDMA/bnxt_re: Do not enable congestion control on VFs
RDMA/bnxt_re: Fix return value of bnxt_re_process_raw_qp_pkt_rx
RDMA/bnxt_re: Fix a possible memory leak
RDMA/hns: Modify the value of long message loopback slice
RDMA/hns: Fix base address table allocation
RDMA/hns: Fix timeout attr in query qp for HIP08
RDMA/efa: Fix unsupported page sizes in device
RDMA/rxe: Convert spin_{lock_bh,unlock_bh} to spin_{lock_irqsave,unlock_irqrestore}
RDMA/rxe: Fix double unlock in rxe_qp.c
MAINTAINERS: Update maintainers of HiSilicon RoCE
RDMA/bnxt_re: Fix the page_size used during the MR creation
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmR3asIACgkQ8vlZVpUN
gaObtQgAoPD1ytW5rfDHIK3s7SXImETH/viqXshlPLF9VcJBO4c5Cj1smfgG1o5v
7iitA3KqT/WZ1sp1ileP0hErYYhAaQRwTzSvEwB7DYJp9KdQu6Gqa8TYL1WoXbih
tNJAeDJaZtPPaeaMQsBdR8cmKeGVVo7ErrcFU6759Ew2g6+UbO2eKjRlhx5xA35q
fszI3A5aqz5TYrbap6tnlzovTDbuJo8O8dNXUp07iPwA2Lllf+v54Anl/iN85rR9
+TbrTuvs4rA1Gbd42coro902Hsg3HmslTI6ajnz5oDPYF9/M3KYRYEzP/ufVzh6p
dmQ3rwYTPSPc1rrLGmXh3YeYIpuJAA==
=71Qb
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix two regressions in ext4 and a number of issues reported by syzbot"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: enable the lazy init thread when remounting read/write
ext4: fix fsync for non-directories
ext4: add lockdep annotations for i_data_sem for ea_inode's
ext4: disallow ea_inodes with extended attributes
ext4: set lockdep subclass for the ea_inode in ext4_xattr_inode_cache_find()
ext4: add EA_INODE checking to ext4_iget()
No Management involved in Zone Appened.
Fixes: bd83fe6f2c ("nvme: add verbose error logging")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
gcc 13 may assign another type to enumeration constants than gcc 12. Split
the large enum at the top of source file stex.c such that the type of the
constants used in time expressions is changed back to the same type chosen
by gcc 12. This patch suppresses compiler warnings like this one:
In file included from ./include/linux/bitops.h:7,
from ./include/linux/kernel.h:22,
from drivers/scsi/stex.c:13:
drivers/scsi/stex.c: In function ‘stex_common_handshake’:
./include/linux/typecheck.h:12:25: error: comparison of distinct pointer types lacks a cast [-Werror]
12 | (void)(&__dummy == &__dummy2); \
| ^~
./include/linux/jiffies.h:106:10: note: in expansion of macro ‘typecheck’
106 | typecheck(unsigned long, b) && \
| ^~~~~~~~~
drivers/scsi/stex.c:1035:29: note: in expansion of macro ‘time_after’
1035 | if (time_after(jiffies, before + MU_MAX_DELAY * HZ)) {
| ^~~~~~~~~~
See also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405.
Cc: stable@vger.kernel.org
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230529195034.3077-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If an attempt at contacting a receiver or a device fails because the
receiver or device never responds, don't restart the communication, only
restart it if the receiver or device answers that it's busy, as originally
intended.
This was the behaviour on communication timeout before commit 586e8fede7
("HID: logitech-hidpp: Retry commands when device is busy").
This fixes some overly long waits in a critical path on boot, when
checking whether the device is connected by getting its HID++ version.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Suggested-by: Mark Lord <mlord@pobox.com>
Fixes: 586e8fede7 ("HID: logitech-hidpp: Retry commands when device is busy")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217412
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Early alternatives are called with the mmu disabled, and then should not
access any global symbols through the GOT since it requires relocations,
relocations that we do before but *virtually*. So only use medany code
model for this early code.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com> # booted on nezha & unmatched
Fixes: 39b3307294 ("riscv: Introduce CONFIG_RELOCATABLE")
Link: https://lore.kernel.org/r/20230526154630.289374-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The bug here is that you cannot rely on getting the same socket
from multiple calls to fget() because userspace can influence
that. This is a kind of double fetch bug.
The fix is to delete the svc_alien_sock() function and instead do
the checking inside the svc_addsock() function.
Fixes: 3064639423 ("nfsd: check passed socket's net matches NFSd superblock's one")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: NeilBrown <neilb@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
All callers of trace_probe_primary_from_call() check the return
value to be non NULL. However, the function returns
list_first_entry(&tpe->probes, ...) which can never be NULL.
Additionally, it does not check for the list being possibly empty,
possibly causing a type confusion on empty lists.
Use list_first_entry_or_null() which solves both problems.
Link: https://lore.kernel.org/linux-trace-kernel/20230128-list-entry-null-check-v1-1-8bde6a3da2ef@diag.uniroma1.it/
Fixes: 60d53e2c3b ("tracing/probe: Split trace_event related data from trace_probe")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
We want to enable runtime PM for serial port device drivers in a generic
way. To do this, we want to have the serial core layer manage the
registered physical serial controller devices.
To manage serial controllers, let's set up a struct bus and struct device
for the serial core controller as suggested by Greg and Jiri. The serial
core controller devices are children of the physical serial port device.
The serial core controller device is needed to support multiple different
kind of ports connected to single physical serial port device.
Let's also set up a struct device for the serial core port. The serial
core port instances are children of the serial core controller device.
With the serial core port device we can now flush pending TX on the
runtime PM resume as suggested by Johan.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Suggested-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230525113034.46880-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The new uart_write() function is only called from suspend/resume code, causing
a build warning when those are left out:
drivers/tty/serial/8250/8250_omap.c:169:13: error: 'uart_write' defined but not used [-Werror=unused-function]
Remove the #ifdefs and use the modern pm_ops/pm_sleep_ops and their wrappers
to let the compiler see where it's used but still drop the dead code.
Fixes: 398cecc248 ("serial: 8250: omap: Fix imprecise external abort for omap_8250_pm()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20230517202012.634386-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After working quite a bit on erratic behaviour of the MPC83xx UART I
(think I) understood the problem. Expand the description accoringly to
conserve the knowledge for the future.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230524122754.481816-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Syzkaller got the following report:
BUG: KASAN: use-after-free in sk_setup_caps+0x621/0x690 net/core/sock.c:2018
Read of size 8 at addr ffff888027f82780 by task syz-executor276/3255
The function sk_setup_caps (called by ip6_sk_dst_store_flow->
ip6_dst_store) referenced already freed memory as this memory was
freed by parallel task in udpv6_sendmsg->ip6_sk_dst_lookup_flow->
sk_dst_check.
task1 (connect) task2 (udp6_sendmsg)
sk_setup_caps->sk_dst_set |
| sk_dst_check->
| sk_dst_set
| dst_release
sk_setup_caps references |
to already freed dst_entry|
The reason for this race condition is: sk_setup_caps() keeps using
the dst after transferring the ownership to the dst cache.
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Vladislav Efanov <VEfanov@ispras.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KVM maintains a mask of supported CPUs when a vPMU type is explicitly
selected by userspace and is used to reject any attempt to run the vCPU
on an unsupported CPU. This is great, but we're still beholden to the
default behavior where vCPUs can be scheduled anywhere and guest
counters may silently stop working.
Avoid confusing the next poor sod to look at this code and document the
intended behavior.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230525212723.3361524-3-oliver.upton@linux.dev
To date KVM has relied on using a perf event to probe the core PMU at
the time of vPMU initialization. Behind the scenes perf_event_init()
would iteratively walk the PMUs of the system and return the PMU that
could handle the event. However, an upcoming change in perf core will
drop the iterative walk, thereby breaking the fragile dance we do on the
KVM side.
Avoid the problem altogether by iterating over the list of supported
PMUs maintained in KVM, returning the core PMU that matches the CPU
we were called on.
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230525212723.3361524-2-oliver.upton@linux.dev
The current code for the length calculation wrongly truncates the reported
length of the groups array, causing an under report of the subscribed
groups. To fix this, use 'BITS_TO_BYTES()' which rounds up the
division by 8.
Fixes: b42be38b27 ("netlink: add API to retrieve all group memberships")
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230529153335.389815-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The reference count on page table allocations is increased for every
'counted' PTE (valid or donated) in the table in addition to the initial
reference from ->zalloc_page(). kvm_pgtable_stage2_free_removed() fails
to drop the last reference on the root of the table walk, meaning we
leak memory.
Fix it by dropping the last reference after the free walker returns,
at which point all references for 'counted' PTEs have been released.
Cc: stable@vger.kernel.org
Fixes: 5c359cca1f ("KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make")
Reported-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230530193213.1663411-1-oliver.upton@linux.dev
When use the following command to test:
1)ip link add bond0 type bond
2)ip link set bond0 up
3)tc qdisc add dev bond0 root handle ffff: mq
4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq
The kernel reports NULL pointer dereference issue. The stack information
is as follows:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Internal error: Oops: 0000000096000006 [#1] SMP
Modules linked in:
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mq_attach+0x44/0xa0
lr : qdisc_graft+0x20c/0x5cc
sp : ffff80000e2236a0
x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0
x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1
x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000
x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000
x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000
x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008
x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001
x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000
Call trace:
mq_attach+0x44/0xa0
qdisc_graft+0x20c/0x5cc
tc_modify_qdisc+0x1c4/0x664
rtnetlink_rcv_msg+0x354/0x440
netlink_rcv_skb+0x64/0x144
rtnetlink_rcv+0x28/0x34
netlink_unicast+0x1e8/0x2a4
netlink_sendmsg+0x308/0x4a0
sock_sendmsg+0x64/0xac
____sys_sendmsg+0x29c/0x358
___sys_sendmsg+0x90/0xd0
__sys_sendmsg+0x7c/0xd0
__arm64_sys_sendmsg+0x2c/0x38
invoke_syscall+0x54/0x114
el0_svc_common.constprop.1+0x90/0x174
do_el0_svc+0x3c/0xb0
el0_svc+0x24/0xec
el0t_64_sync_handler+0x90/0xb4
el0t_64_sync+0x174/0x178
This is because when mq is added for the first time, qdiscs in mq is set
to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we
need to initialize qdiscs in the mq before continuing to graft. Otherwise,
it will couse NULL pointer dereference issue in mq_attach(). And the same
issue will occur in the attach functions of mqprio, taprio and htb.
ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow
any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and
the command should be dropped.
Fixes: 6ec1c69a8f ("net_sched: add classful multiqueue dummy scheduler")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Tested-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ashutosh Dixit
Edward Cree
Moshe Shemesh
Saeed Mahameed
Chuck Lever
Niklas Schnelle
Shay Drory
Ikshwaku Chauhan
Linus Torvalds
Guchun Chen
Horatio Zhang
Michel Dänzer
Tim Huang
K Prateek Nayak
Mirsad Goran Todorovac
Dan Carpenter
Thomas Gleixner
Christoph Hellwig
Bart Van Assche
Bastien Nocera
Alexandre Ghiti
Pietro Borrello
Tony Lindgren
Arnd Bergmann
Geert Uytterhoeven
Uwe Kleine-König
Vladislav Efanov
Oliver Upton
Pedro Tammela
Zhengchao Shao
Jakub Kicinski