Add __T_VERBOSE() so tests can add verbose output. The verbose output is
enabled with the '-v' command line option. Running 'make tests V=1' will
enable the '-v' option when running the tests.
It'll be used in the next patch, for a user space counter access test.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210414155412.3697605-3-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order to support usersapce access, an event must be mmapped. While
there's already mmap support for evlist, the usecase is a bit different
than the self monitoring with userspace access. So let's add new
perf_evsel__mmap()/perf_evsel_munmap() functions to mmap/munmap an
evsel. This allows implementing userspace access as a fastpath for
perf_evsel__read().
The mmapped address is returned by perf_evsel__mmap_base() which
primarily for users/tests to check if userspace access is enabled.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210414155412.3697605-2-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an initial math64.h similar to linux/math64.h with functions
mul_u64_u64_div64() and mul_u64_u32_shr(). This isn't a direct copy of
include/linux/math64.h as that doesn't define mul_u64_u64_div64().
Implementation was written by Peter Zilkstra based on linux/math64.h
and div64.h[1]. The original implementation was not optimal on arm64 as
__int128 division is not optimal with a call out to __udivti3, so I
dropped the __int128 variant of mul_u64_u64_div64().
[1] https://lore.kernel.org/lkml/20200322101848.GF2452@worktop.programming.kicks-ass.net/
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Itaru Kitayama <itaru.kitayama@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210414155412.3697605-2-robh@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Before:
# perf record -a cycles,instructions,cache-misses
Workload failed: No such file or directory
#
After:
# perf record -a cycles,instructions,cache-misses
Failed to collect 'cycles' for the 'cycles,instructions,cache-misses' workload: No such file or directory
#
Helps disambiguating other error scenarios:
# perf record -a -e cycles,instructions,cache-misses bla
Failed to collect 'cycles,instructions,cache-misses' for the 'bla' workload: No such file or directory
# perf record -a cycles,instructions,cache-misses sleep 1
Failed to collect 'cycles' for the 'cycles,instructions,cache-misses' workload: No such file or directory
#
When all goes well we're back to the usual:
# perf record -a -e cycles,instructions,cache-misses sleep 1
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 3.151 MB perf.data (21242 samples) ]
#
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210414131628.2064862-3-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'scnprintf' method to obtain the list of evsels in a evlist as a
string, excluding the "dummy" event used for things like receiving
metadata events (PERF_RECORD_FORK, MMAP, etc) when synthesizing
preexisting threads.
Will be used to improve the error message for workload failure in 'perf
record.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20210414131628.2064862-2-acme@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is just missing a ';'. This macro is not used by any test yet.
Fixes: 22ba363516 ("selftests/bpf: Move and extend ASSERT_xxx() testing macros")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210414155632.737866-1-revest@chromium.org
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmBzdS0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGDdAIAIpKH/tAHhH7s7QH
m5ewgE8foP7M5Ue9fp3+JmbtaYSzhCAMcKhqGtat/zk5PvA9AoYCDXrTetfYtBHh
LUOmhL9hcKItNobfkYBok6BiFjGUEL3HMqz5w+MUsMwnXIc4RXqfJmsQ932z9Kxf
yDwe6ehIzJVrQLI/C0mTamYRHu2aiZ1VWzhKuT493rLeg0R2odCCIClPN+/QvCwb
8/sk6l1c8eOUYYMUzKFZifaZGb12qDjRt4pZmk51aMTzg0WCpElJG+7Uqr4QQhZP
p6xeNuUQq6WwxtlDkmo79Uzkrurb5tN2/hZ1RcJhs3EdHfpR0MjIyH3Znnb31gnu
39VjHhg=
=4KP/
-----END PGP SIGNATURE-----
Merge tag 'v5.12-rc7' into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In hist__find_annotations(), since different 'struct hist_entry' entries
may point to same symbol, we free notes->src to signal already processed
this symbol in stdio mode; when annotate, entry will skipped if
notes->src is NULL to avoid repeated output.
However, there is a problem, for example, run the following command:
# perf record -e branch-misses -e branch-instructions -a sleep 1
perf.data file contains different types of sample event.
If the same IP sample event exists in branch-misses and branch-instructions,
this event uses the same symbol. When annotate branch-misses events, notes->src
corresponding to this event is set to null, as a result, when annotate
branch-instructions events, this event is skipped and no annotate is output.
Solution of this patch is to remove zfree in hists__find_annotations and
change sort order to "dso,symbol" to avoid duplicate output when different
processes correspond to the same symbol.
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: zhangjinhao2@huawei.com
Link: http://lore.kernel.org/lkml/20210319123527.173883-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Extend the fexit_bpf2bpf test to check that the info for the bpf_link
returned by the kernel matches the expected values.
While we're updating the test, change existing uses of CHEC() to use the
much easier to read ASSERT_*() macros.
v2:
- Convert last CHECK() call and get rid of 'duration' var
- Split ASSERT_OK_PTR() checks to two separate if statements
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413091607.58945-2-toke@redhat.com
There is currently no way to discover the target of a tracing program
attachment after the fact. Add this information to bpf_link_info and return
it when querying the bpf_link fd.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413091607.58945-1-toke@redhat.com
In 'bpf_ringbuf_reserve()' we require the flag to '0' at the moment.
For 'bpf_ringbuf_{discard,submit,output}' a flag of '0' might send a
notification to the process if needed.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210412192434.944343-1-pctammela@mojatatu.com
Synchronize tools/include/uapi/linux/bpf.h which was missing changes
from various commits:
- f3c45326ee ("bpf: Document PROG_TEST_RUN limitations")
- e5e35e754c ("bpf: BPF-helper for MTU checking add length input")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add some basic veth tests, that verify the expected flags and
aggregation with different setups (default, xdp, etc...)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull RCU changes from Paul E. McKenney:
- Bitmap support for "N" as alias for last bit
- kvfree_rcu updates
- mm_dump_obj() updates. (One of these is to mm, but was suggested by Andrew Morton.)
- RCU callback offloading update
- Polling RCU grace-period interfaces
- Realtime-related RCU updates
- Tasks-RCU updates
- Torture-test updates
- Torture-test scripting updates
- Miscellaneous fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mac80211, wireless, and bpf trees. No scary regressions here
or in the works, but small fixes for 5.12 changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params
from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding
the rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related
tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool
memory model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SHL0
-----END PGP SIGNATURE-----
Merge tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.12-rc7, including fixes from can, ipsec,
mac80211, wireless, and bpf trees.
No scary regressions here or in the works, but small fixes for 5.12
changes keep coming.
Current release - regressions:
- virtio: do not pull payload in skb->head
- virtio: ensure mac header is set in virtio_net_hdr_to_skb()
- Revert "net: correct sk_acceptq_is_full()"
- mptcp: revert "mptcp: provide subflow aware release function"
- ethernet: lan743x: fix ethernet frame cutoff issue
- dsa: fix type was not set for devlink port
- ethtool: remove link_mode param and derive link params from driver
- sched: htb: fix null pointer dereference on a null new_q
- wireless: iwlwifi: Fix softirq/hardirq disabling in
iwl_pcie_enqueue_hcmd()
- wireless: iwlwifi: fw: fix notification wait locking
- wireless: brcmfmac: p2p: Fix deadlock introduced by avoiding the
rtnl dependency
Current release - new code bugs:
- napi: fix hangup on napi_disable for threaded napi
- bpf: take module reference for trampoline in module
- wireless: mt76: mt7921: fix airtime reporting and related tx hangs
- wireless: iwlwifi: mvm: rfi: don't lock mvm->mutex when sending
config command
Previous releases - regressions:
- rfkill: revert back to old userspace API by default
- nfc: fix infinite loop, refcount & memory leaks in LLCP sockets
- let skb_orphan_partial wake-up waiters
- xfrm/compat: Cleanup WARN()s that can be user-triggered
- vxlan, geneve: do not modify the shared tunnel info when PMTU
triggers an ICMP reply
- can: fix msg_namelen values depending on CAN_REQUIRED_SIZE
- can: uapi: mark union inside struct can_frame packed
- sched: cls: fix action overwrite reference counting
- sched: cls: fix err handler in tcf_action_init()
- ethernet: mlxsw: fix ECN marking in tunnel decapsulation
- ethernet: nfp: Fix a use after free in nfp_bpf_ctrl_msg_rx
- ethernet: i40e: fix receiving of single packets in xsk zero-copy
mode
- ethernet: cxgb4: avoid collecting SGE_QBASE regs during traffic
Previous releases - always broken:
- bpf: Refuse non-O_RDWR flags in BPF_OBJ_GET
- bpf: Refcount task stack in bpf_get_task_stack
- bpf, x86: Validate computation of branch displacements
- ieee802154: fix many similar syzbot-found bugs
- fix NULL dereferences in netlink attribute handling
- reject unsupported operations on monitor interfaces
- fix error handling in llsec_key_alloc()
- xfrm: make ipv4 pmtu check honor ip header df
- xfrm: make hash generation lock per network namespace
- xfrm: esp: delete NETIF_F_SCTP_CRC bit from features for esp
offload
- ethtool: fix incorrect datatype in set_eee ops
- xdp: fix xdp_return_frame() kernel BUG throw for page_pool memory
model
- openvswitch: fix send of uninitialized stack memory in ct limit
reply
Misc:
- udp: add get handling for UDP_GRO sockopt"
* tag 'net-5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (182 commits)
net: fix hangup on napi_disable for threaded napi
net: hns3: Trivial spell fix in hns3 driver
lan743x: fix ethernet frame cutoff issue
net: ipv6: check for validity before dereferencing cfg->fc_nlinfo.nlh
net: dsa: lantiq_gswip: Configure all remaining GSWIP_MII_CFG bits
net: dsa: lantiq_gswip: Don't use PHY auto polling
net: sched: sch_teql: fix null-pointer dereference
ipv6: report errors for iftoken via netlink extack
net: sched: fix err handler in tcf_action_init()
net: sched: fix action overwrite reference counting
Revert "net: sched: bump refcount for new action in ACT replace mode"
ice: fix memory leak of aRFS after resuming from suspend
i40e: Fix sparse warning: missing error code 'err'
i40e: Fix sparse error: 'vsi->netdev' could be null
i40e: Fix sparse error: uninitialized symbol 'ring'
i40e: Fix sparse errors in i40e_txrx.c
i40e: Fix parameters in aq_get_phy_register()
nl80211: fix beacon head validation
bpf, x86: Validate computation of branch displacements for x86-32
bpf, x86: Validate computation of branch displacements for x86-64
...
Test map__set_inner_map_fd() interaction with map-in-map
initialization. Use hashmap of maps just to make it different to
existing array of maps.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-9-yauheni.kaliuta@redhat.com
Set bpf table sizes dynamically according to the runtime page size
value.
Do not switch to ASSERT macros, keep CHECK, for consistency with the
rest of the test. Can be a separate cleanup patch.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-8-yauheni.kaliuta@redhat.com
The API gives access to inner map for map in map types (array or
hash of map). It will be used to dynamically set max_entries in it.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-7-yauheni.kaliuta@redhat.com
Replace hardcoded 4096 with runtime value in the userspace part of
the test and set bpf table sizes dynamically according to the value.
Do not switch to ASSERT macros, keep CHECK, for consistency with the
rest of the test. Can be a separate cleanup patch.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-6-yauheni.kaliuta@redhat.com
Replace hardcoded 4096 with runtime value in the userspace part of
the test and set bpf table sizes dynamically according to the value.
Do not switch to ASSERT macros, keep CHECK, for consistency with the
rest of the test. Can be a separate cleanup patch.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-5-yauheni.kaliuta@redhat.com
Use ASSERT to check result but keep CHECK where format was used to
report error.
Use bpf_map__set_max_entries() to set map size dynamically from
userspace according to page size.
Zero-initialize the variable in bpf prog, otherwise it will cause
problems on some versions of Clang.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-4-yauheni.kaliuta@redhat.com
Since there is no convenient way for bpf program to get PAGE_SIZE
from inside of the kernel, pass the value from userspace.
Zero-initialize the variable in bpf prog, otherwise it will cause
problems on some versions of Clang.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-3-yauheni.kaliuta@redhat.com
Switch the test to use BPF skeleton to save some boilerplate and
make it easy to access bpf program bss segment.
The latter will be used to pass PAGE_SIZE from userspace since there
is no convenient way for bpf program to get it from inside of the
kernel.
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210408061310.95877-2-yauheni.kaliuta@redhat.com
Verify cleanup of failed actions batch change where second action in batch
fails after successful init of first action.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify cleanup of failed actions batch add where second action in batch
fails after successful init of first action.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add PMU events for AMD Zen3 processors as documented in the AMD Processor
Programming Reference for Family 19h and Model 01h [1].
Below are the events which are new on Zen3:
PMCx041 ls_mab_alloc.{all_allocations|hardware_prefetcher_allocations|load_store_allocations}
PMCx043 ls_dmnd_fills_from_sys.ext_cache_local
PMCx044 ls_any_fills_from_sys.{mem_io_remote|ext_cache_remote|mem_io_local|ext_cache_local|int_cache|lcl_l2}
PMCx047 ls_misal_loads.{ma4k|ma64}
PMCx059 ls_sw_pf_dc_fills.ext_cache_local
PMCx05a ls_hw_pf_dc_fills.ext_cache_local
PMCx05f ls_alloc_mab_count
PMCx085 bp_l1_tlb_miss_l2_tlb_miss.coalesced_4k
PMCx0ab de_dis_cops_from_decoder.disp_op_type.{any_integer_dispatch|any_fp_dispatch}
PMCx0cc ex_ret_ind_brch_instr
PMCx18e ic_tag_hit_miss.{all_instruction_cache_accesses|instruction_cache_miss|instruction_cache_hit}
PMCx1c7 ex_ret_msprd_brnch_instr_dir_msmtch
PMCx28f op_cache_hit_miss.{all_op_cache_accesses|op_cache_miss|op_cache_hit}
Section 2.1.17.2 "Performance Measurement" of "PPR for AMD Family 19h,
Model 01h, Revision B1 Processors - 55898 Rev 0.35 - Feb 5, 2021." lists
new metrics. Add them.
Preserve the events for Zen3 if they are measurable and non-zero as taken
from Zen2 directory even if the PPR of Zen3 [1] omits them. Those events
are the following:
PMCx000 fpu_pipe_assignment.{total|total0|total1|total2|total3}
PMCx004 fp_num_mov_elim_scal_op.{optimized|opt_potential|sse_mov_ops_elim|sse_mov_ops}
PMCx02D ls_rdtsc
PMCx040 ls_dc_accesses
PMCx046 ls_tablewalker.{iside|ic_type1|ic_type0|dside|dc_type1|dc_type0}
PMCx061 l2_request_g2.{group1|ls_rd_sized|ls_rd_sized_nc|ic_rd_sized|ic_rd_sized_nc|smc_inval|bus_lock_originator|bus_locks_responses}
PMCx062 l2_latency.l2_cycles_waiting_on_fills
PMCx063 l2_wcb_req.{wcb_write|wcb_close|zero_byte_store|cl_zero}
PMCx06d l2_fill_pending.l2_fill_busy
PMCx080 ic_fw32
PMCx081 ic_fw32_miss
PMCx086 bp_snp_re_sync
PMCx087 ic_fetch_stall.{ic_stall_any|ic_stall_dq_empty|ic_stall_back_pressure}
PMCx08a bp_l1_btb_correct
PMCx08c ic_cache_inval.{l2_invalidating_probe|fill_invalidated}
PMCx099 bp_tlb_rel
PMCx0a9 de_dis_uop_queue_empty_di0
PMCx0c7 ex_ret_brn_resync
PMCx28a ic_oc_mode_switch.{oc_ic_mode_switch|ic_oc_mode_switch}
L3PMCx01 l3_request_g1.caching_l3_cache_accesses
L3PMCx06 l3_comb_clstr_state.{other_l3_miss_typs|request_miss}
[1] Processor Programming Reference (PPR) for AMD Family 19h, Model 01h,
Revision B1 Processors - 55898 Rev 0.35 - Feb 5, 2021.
[2] Processor Programming Reference (PPR) for AMD Family 17h Model 71h,
Revision B0 Processors, 56176 Rev 3.06 - Jul 17, 2019.
[3] Processor Programming Reference (PPR) for AMD Family 17h Models
01h,08h, Revision B2 Processors, 54945 Rev 3.03 - Jun 14, 2019.
All of the PPRs can be found at:
https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-5-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use 0x%02x format for all event codes and umasks as this helps in tracking
changes of automatically generated event tables.
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-4-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The values of event codes and umasks are inconsistent with letter cases.
Enforce a unique style and default everything to lower case as this
helps in tracking changes of automatically generated event tables.
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-3-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 08ed77e414 ("perf vendor events amd: Add recommended events")
added the hits event "L2 Cache Hits from L2 HWPF" with the same metric
expression as the accesses event "L2 Cache Accesses from L2 HWPF":
$ perf list --details
...
l2_cache_accesses_from_l2_hwpf
[L2 Cache Accesses from L2 HWPF]
[l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3]
l2_cache_hits_from_l2_hwpf
[L2 Cache Hits from L2 HWPF]
[l2_pf_hit_l2 + l2_pf_miss_l2_hit_l3 + l2_pf_miss_l2_l3]
...
This was wrong and led to counting hits the same as accesses. Section
2.1.15.2 "Performance Measurement" of "PPR for AMD Family 17h Model 31h
B0 - 55803 Rev 0.54 - Sep 12, 2019", documents the hits event with
EventCode 0x70 which is the same as l2_pf_hit_l2.
Fix this, and massage the description for l2_pf_hit_l2 as the hits event
is now the duplicate of l2_pf_hit_l2. AMD recommends using the recommended
event over other events if the duplicate exists and maintain both for
consistency. Hence, l2_cache_hits_from_l2_hwpf should override
l2_pf_hit_l2.
Before:
# perf stat -M l2_cache_accesses_from_l2_hwpf,l2_cache_hits_from_l2_hwpf sleep 1
Performance counter stats for 'sleep 1':
1,436 l2_pf_miss_l2_l3 # 11114.00 l2_cache_accesses_from_l2_hwpf
# 11114.00 l2_cache_hits_from_l2_hwpf
4,482 l2_pf_hit_l2
5,196 l2_pf_miss_l2_hit_l3
1.001765339 seconds time elapsed
After:
# perf stat -M l2_cache_accesses_from_l2_hwpf sleep 1
Performance counter stats for 'sleep 1':
1,477 l2_pf_miss_l2_l3 # 10442.00 l2_cache_accesses_from_l2_hwpf
3,978 l2_pf_hit_l2
4,987 l2_pf_miss_l2_hit_l3
1.001491186 seconds time elapsed
# perf stat -e l2_cache_hits_from_l2_hwpf sleep 1
Performance counter stats for 'sleep 1':
3,983 l2_cache_hits_from_l2_hwpf
1.001329970 seconds time elapsed
Note the difference in performance counter values for the accesses
versus the hits after the fix, and the hits event now counting the same
as l2_pf_hit_l2.
Fixes: 08ed77e414 ("perf vendor events amd: Add recommended events")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206537
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> # On a 3900X
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vijay Thakkar <vijaythakkar@me.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20210406215944.113332-2-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add L1 metrics. Formula is as consistent as possible with MAN pages
description for these metrics.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1617791570-165223-5-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a function to find the common PMU map for the system.
For arm64, a special variant is added. This is because arm64 supports
heterogeneous CPU systems. As such, it cannot be guaranteed that the
cpumap is same for all CPUs. So in case of heterogeneous systems, don't
return a cpumap.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/1617791570-165223-4-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pmu-events parsing test does not handle metric reuse at all.
Introduce some simple handling to resolve metrics who reference other
metrics.
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/1617791570-165223-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Function find_metric() is required for the metric processing in the
pmu-events testcase, so make it public. Also change the name to include
"metricgroup".
Tested-by: Paul A. Clarke <pc@us.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/1617791570-165223-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For validating the stack offset behavior, report the offset from a given
process's first seen stack address. Add s script to calculate the results
to the LKDTM kselftests.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210401232347.2791257-7-keescook@chromium.org
The suggested alternative for getting cache-inhibited memory with 'mem='
and /dev/mem is pretty hacky. Also, PAPR guests do not allow system
memory to be mapped cache-inhibited so despite /dev/mem being available
this will not work which can cause confusion. Instead recommend using
the memtrace buffers. memtrace is only available on powernv so there
will not be any chance of trying to do this in a guest.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210225032108.1458352-2-jniethe5@gmail.com
Previously when mapping kernel memory on radix, no ptesync was
included which would periodically lead to unhandled spurious faults.
Mapping kernel memory is used when code patching with Strict RWX
enabled. As suggested by Chris Riedl, turning ftrace on and off does a
large amount of code patching so is a convenient way to see this kind
of fault.
Add a selftest to try and trigger this kind of a spurious fault. It
tests for 30 seconds which is usually long enough for the issue to
show up.
Signed-off-by: Jordan Niethe <jniethe5@gmail.com>
[mpe: Rename it to better reflect what it does, rather than the symptom]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208032957.1232102-2-jniethe5@gmail.com
Change a few printed messages to report test progress more clearly.
Add a missing "\n" at the end of one printed message.
Suggested-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch added a new testcase for setting the net device name. In it,
pass the net device name to pm_nl_ctl to set the ifindex field of struct
mptcp_pm_addr_entry.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SPE extended headers are > 1 byte so ensure the buffer contains at least
this before reading. This issue was detected by fuzzing.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Dave Martin <dave.martin@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20210407153955.317215-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This release adds following changes:
- Support increased number of CPUs
- Return error when mailbox commmand fails to enable core-power
- Option to online all CPUs
- Removes build date and time print
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
These macros introduce nondeterminism in builds, and break reproducible
builds.
Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
It is possible that users manually offlined CPUs via sysfs interface
and then started this utility. In this case we will not be able to get
package and die id of the those CPUs. So add an option to force online
if required for some commands.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Some older kernels don't support reading core-power status. In that case
mailbox command fails. So, display core-power status as "unknown" instead
of supported.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The current string size to print cpulist can accommodate upto 80
logical CPUs per package. But this limit is not enough. So increase
the string size. Also prevent buffer overflow, if the string size
reaches limit.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This commit squashes the following:
ACPICA commit bc8939e2d902653e71bb1601b129a993c37fcfad
ACPICA commit 2d9e5e98e23f2a569e5691e6bed183146e25798d
ACPICA commit 937358156631ea7a0eef3569c213c82a031097d5
Fix more spelling issues found using the codespell checker and found
without tools.
Link: https://github.com/acpica/acpica/commit/bc8939e2
Link: https://github.com/acpica/acpica/commit/2d9e5e98
Link: https://github.com/acpica/acpica/commit/93735815
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bring some improvements/rationalization over the first version
of the vgic_init selftests:
- ucall_init is moved in run_cpu()
- vcpu_args_set is not called as not needed
- whenever a helper is supposed to succeed, call the non "_" version
- helpers do not return -errno, instead errno is checked by the caller
- vm_gic struct is used whenever possible, as well as vm_gic_destroy
- _kvm_create_device takes an addition fd parameter
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210407135937.533141-1-eric.auger@redhat.com
'struct mem_info' is defined at 22nd line.
The declaration here is unnecessary. Remove it.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kael_w@yeah.net
Link: http://lore.kernel.org/lkml/20210406105104.675879-1-wanjiabing@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tests exercise the VGIC_V3 device creation including the
associated KVM_DEV_ARM_VGIC_GRP_ADDR group attributes:
- KVM_VGIC_V3_ADDR_TYPE_DIST/REDIST
- KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION
Some other tests dedicate to KVM_DEV_ARM_VGIC_GRP_REDIST_REGS group
and especially the GICR_TYPER read. The goal was to test the case
recently fixed by commit 23bde34771
("KVM: arm64: vgic-v3: Drop the reporting of GICR_TYPER.Last for userspace").
The API under test can be found at
Documentation/virt/kvm/devices/arm-vgic-v3.rst
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210405163941.510258-10-eric.auger@redhat.com
Changeset b00aedf978 ("doc: Convert to rcu_dereference.txt to rcu_dereference.rst")
renamed: Documentation/RCU/rcu_dereference.txt
to: Documentation/RCU/rcu_dereference.rst.
Update its cross-reference accordingly.
Fixes: b00aedf978 ("doc: Convert to rcu_dereference.txt to rcu_dereference.rst")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Expose SGX architectural structures, as KVM will use many of the
architectural constants and structs to virtualize SGX.
Name the new header file as asm/sgx.h, rather than asm/sgx_arch.h, to
have single header to provide SGX facilities to share with other kernel
componments. Also update MAINTAINERS to include asm/sgx.h.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lkml.kernel.org/r/6bf47acd91ab4d709e66ad1692c7803e4c9063a0.1616136308.git.kai.huang@intel.com
Since commit 14d3d54052 ("perf session: Try to read pipe data from
file") 'perf inject' has started printing "PERFILE2h" when not processing
pipes.
The commit exposed perf to the possiblity that the input is not a pipe
but the 'repipe' parameter gets used. That causes the printing because
perf inject sets 'repipe' to true always.
The 'repipe' parameter of perf_session__new() is used by 2 functions:
- perf_file_header__read_pipe()
- trace_report()
In both cases, the functions copy data to STDOUT_FILENO when 'repipe' is
true.
Fix by setting 'repipe' to true only if the output is a pipe.
Fixes: e558a5bd8b ("perf inject: Work with files")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andrew Vagin <avagin@openvz.org>
Link: http://lore.kernel.org/lkml/20210401103605.9000-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The tracing test and the recent kfunc call test require
CONFIG_DYNAMIC_FTRACE. This patch adds it to the config file.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210403002921.3419721-1-kafai@fb.com
With a relatively recent clang master branch test_map skips a section,
libbpf: elf: skipping unrecognized data section(5) .rodata.str1.1
the cause is some pointless strings from bpf_printks in the BPF program
loaded during testing. After just removing the prints to fix above error
Daniel points out the program is a bit pointless and could be simply the
empty program returning SK_PASS.
Here we do just that and return simply SK_PASS. This program is used with
test_maps selftests to test insert/remove of a program into the sockmap
and sockhash maps. Its not testing actual functionality of the TCP
sockmap programs, these are tested from test_sockmap. So we shouldn't
lose in test coverage and fix above warnings. This original test was
added before test_sockmap existed and has been copied around ever since,
clean it up now.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/161731595664.74613.1603087410166945302.stgit@john-XPS-13-9370
Very occasionally, MPTCP selftests fail. Yeah, I saw that at least once!
Here we provide more details in case of errors with mptcp_join.sh script
like it was done with mptcp_connect.sh, see
commit 767389c8dd ("selftests: mptcp: dump more info on errors")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not to be impacted by packets sent between sub-tests.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
'mptcp_connect' already has a timeout for poll() but in some cases, it
is not enough.
With "timeout" tool, we will force the command to fail if it doesn't
finish on time. Thanks to that, the script will continue and display
details about the current state before marking the test as failed.
Displaying this state is very important to be able to understand the
issue. Best to have our CI reporting the issue than just "the test
hanged".
Note that in mptcp_connect.sh, we were using a long timeout to validate
the fact we cannot create a socket if a sysctl is set. We don't need
this timeout.
In diag.sh, we want to send signals to mptcp_connect instances that have
been started in the netns. But we cannot send this signal to 'timeout'
otherwise that will stop the timeout and messages telling us SIGUSR1 has
been received will be printed. Instead of trying to find the right PID
and storing them in an array, we can simply use the output of
'ip netns pids' which is all the PIDs we want to send signal to.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/160
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TL;DR
$ ./tools/testing/kunit/kunit.py run --kunitconfig=lib/kunit
Per suggestion from Ted [1], we can reduce the amount of typing by
assuming a convention that these files are named '.kunitconfig'.
In the case of [1], we now have
$ ./tools/testing/kunit/kunit.py run --kunitconfig=fs/ext4
Also add in such a fragment for kunit itself so we can give that as an
example more close to home (and thus less likely to be accidentally
broken).
[1] https://lore.kernel.org/linux-ext4/YCNF4yP1dB97zzwD@mit.edu/
Signed-off-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Dan reported following static checker warnings
tools/testing/selftests/resctrl/resctrl_val.c:545 measure_vals()
warn: 'bw_imc' unsigned <= 0
tools/testing/selftests/resctrl/resctrl_val.c:549 measure_vals()
warn: 'bw_resc_end' unsigned <= 0
These warnings are reported because
1. measure_vals() declares 'bw_imc' and 'bw_resc_end' as unsigned long
variables
2. Return value of get_mem_bw_imc() and get_mem_bw_resctrl() are assigned
to 'bw_imc' and 'bw_resc_end' respectively
3. The returned values are checked for <= 0 to see if the calls failed
Checking for < 0 for an unsigned value doesn't make any sense.
Fix this issue by changing the implementation of get_mem_bw_imc() and
get_mem_bw_resctrl() such that they now accept reference to a variable
and set the variable appropriately upon success and return 0, else return
< 0 on error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
iMC (Integrated Memory Controller) counters are usually at
"/sys/bus/event_source/devices/" and are named as "uncore_imc_<n>".
num_of_imcs() function tries to count number of such iMC counters so that
it could appropriately initialize required number of perf_attr structures
that could be used to read these iMC counters.
num_of_imcs() function assumes that all the directories under this path
that start with "uncore_imc" are iMC counters. But, on some systems there
could be directories named as "uncore_imc_free_running" which aren't iMC
counters. Trying to read from such directories will result in "not found
file" errors and MBM/MBA tests will fail.
Hence, fix the logic in num_of_imcs() such that it looks at the first
character after "uncore_imc_" to check if it's a numerical digit or not. If
it's a digit then the directory represents an iMC counter, else, skip the
directory.
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
umount_resctrlfs() directly attempts to unmount resctrl file system without
checking if resctrl FS is already mounted or not. It returns 0 on success
and on failure it prints an error message and returns an error status.
Calling umount_resctrlfs() when resctrl FS isn't mounted will return an
error status.
There could be situations where-in the caller might not know if resctrl
FS is already mounted or not and the caller might still want to unmount
resctrl FS if it's already mounted (For example during teardown).
To support above use cases, change umount_resctrlfs() such that it now
first checks if resctrl FS is already mounted or not and unmounts resctrl
FS only if it's already mounted.
unmount resctrl FS upon exit. For example, running only mba test on a
Broadwell (BDW) machine (MBA isn't supported on BDW CPU).
This happens because validate_resctrl_feature_request() would mount resctrl
FS to check if mba is enabled on the platform or not and finds that the H/W
doesn't support mba and hence will return false to run_mba_test(). This in
turn makes the main() function return without unmounting resctrl FS.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There could be two reasons why a resctrl feature might not be enabled on
the platform
1. H/W might not support the feature
2. Even if the H/W supports it, the user might have disabled the feature
through kernel command line arguments
Hence, any resctrl unit test (like cmt, cat, mbm and mba) before starting
the test will first check if the feature is enabled on the platform or not.
If the feature isn't enabled, then the test returns with an error status.
For example, if MBA isn't supported on a platform and if the user tries to
run MBA, the output will look like this
ok mounting resctrl to "/sys/fs/resctrl"
not ok MBA: schemata change
But, not supporting a feature isn't a test failure. So, instead of treating
it as an error, use the SKIP directive of the TAP protocol. With the
change, the output will look as below
ok MBA # SKIP Hardware does not support MBA or MBA is disabled
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resctrl test suite main() function does the following things
1. Parses command line arguments passed by user
2. Some setup checks
3. Logic that calls into each unit test
4. Print result and clean up after running each unit test
Introduce wrapper functions for steps 3 and 4 to modularize the main()
function. Adding these wrapper functions makes it easier to add any logic
to each individual test.
Please note that this is a preparatory patch for the next one and no
functional changes are intended.
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cache related tests (like CAT and CMT) depend on a variable called
no_of_bits to run. no_of_bits defines the number of contiguous bits
that should be set in the CBM mask and a user can pass a value for
no_of_bits using -n command line argument. If a user hasn't passed any
value, it defaults to 5 (randomly chosen value).
Hard coding no_of_bits to 5 will make the cache tests fail to run on
systems that support maximum cbm mask that is less than or equal to 5 bits.
Hence, don't hard code no_of_bits value.
If a user passes a value for "no_of_bits" using -n option, use it.
Otherwise, no_of_bits is equal to half of the maximum number of bits in
the cbm mask.
Please note that CMT test is still hard coded to 5 bits. It will change in
subsequent patches that change CMT test.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
MBM unit test starts fill_buf (default built-in benchmark) in a new con_mon
group (c1, m1) and records resctrl reported mbm values and iMC (Integrated
Memory Controller) values every second. It does this for five seconds
(randomly chosen value) in total. It then calculates average of resctrl_mbm
values and imc_mbm values and if the difference is greater than 300 MB/sec
(randomly chosen value), the test treats it as a failure. MBA unit test is
similar to MBM but after every run it changes schemata.
Checking for a difference of 300 MB/sec doesn't look very meaningful when
the mbm values are changing over a wide range. For example, below are the
values running MBA test on SKL with different allocations
1. With 10% as schemata both iMC and resctrl mbm_values are around 2000
MB/sec
2. With 100% as schemata both iMC and resctrl mbm_values are around 10000
MB/sec
A 300 MB/sec difference between resctrl_mbm and imc_mbm values is
acceptable at 100% schemata but it isn't acceptable at 10% schemata because
that's a huge difference.
So, fix this by checking for percentage difference instead of absolute
difference i.e. check if the difference between resctrl_mbm value and
imc_mbm value is within 5% (randomly chosen value) of imc_mbm value. If the
difference is greater than 5% of imc_mbm value, treat it is a failure.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resctrl test suite before running any unit test (like cmt, cat, mbm and
mba) should first check if the feature is enabled (by kernel and not just
supported by H/W) on the platform or not.
validate_resctrl_feature_request() is supposed to do that. This function
intends to grep for relevant flags in /proc/cpuinfo but there are several
issues here
1. validate_resctrl_feature_request() calls fgrep() to get flags from
/proc/cpuinfo. But, fgrep() can only return a string with maximum of 255
characters and hence the complete cpu flags are never returned.
2. The substring search logic is also busted. If strstr() finds requested
resctrl feature in the cpu flags, it returns pointer to the first
occurrence. But, the logic negates the return value of strstr() and
hence validate_resctrl_feature_request() returns false if the feature is
present in the cpu flags and returns true if the feature is not present.
3. validate_resctrl_feature_request() checks if a resctrl feature is
reported in /proc/cpuinfo flags or not. Having a cpu flag means that the
H/W supports the feature, but it doesn't mean that the kernel enabled
it. A user could selectively enable only a subset of resctrl features
using kernel command line arguments. Hence, /proc/cpuinfo isn't a
reliable source to check if a feature is enabled or not.
The 3rd issue being the major one and fixing it requires changing the way
validate_resctrl_feature_request() works. Since, /proc/cpuinfo isn't the
right place to check if a resctrl feature is enabled or not, a more
appropriate place is /sys/fs/resctrl/info directory. Change
validate_resctrl_feature_request() such that,
1. For cat, check if /sys/fs/resctrl/info/L3 directory is present or not
2. For mba, check if /sys/fs/resctrl/info/MB directory is present or not
3. For cmt, check if /sys/fs/resctrl/info/L3_MON directory is present and
check if /sys/fs/resctrl/info/L3_MON/mon_features has llc_occupancy
4. For mbm, check if /sys/fs/resctrl/info/L3_MON directory is present and
check if /sys/fs/resctrl/info/L3_MON/mon_features has
mbm_<total/local>_bytes
Please note that only L3_CAT, L3_CMT, MBA and MBM are supported. CDP and L2
variants can be added later.
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
check_resctrlfs_support() does the following
1. Checks if the platform supports resctrl file system or not by looking
for resctrl in /proc/filesystems
2. Calls opendir() on default resctrl file system path
(i.e. /sys/fs/resctrl)
3. Checks if resctrl file system is mounted or not by looking at
/proc/mounts
Steps 2 and 3 will fail if the platform does not support resctrl file
system. So, there is no need to check for them if step 1 fails.
Fix this by returning immediately if the platform does not support
resctrl file system.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a missing newline to the printed help text to improve readability.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
show_cache_info() functions are defined separately in CAT and CMT
tests. But the functions are same for the tests and unnecessary
to be defined separately. Share the function by the tests.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
CMT (Cache Monitoring Technology) [1] is a H/W feature that reports cache
occupancy of a process. resctrl selftest suite has a unit test to test CMT
for LLC but the test is named as CQM (Cache Quality Monitoring).
Furthermore, the unit test source file is named as cqm_test.c and several
functions, variables, comments, preprocessors and statements widely use
"cqm" as either suffix or prefix. This rampant misusage of CQM for CMT
might confuse someone who is newly looking at resctrl selftests because
this feature is named CMT in the Intel Software Developer's Manual.
Hence, rename all the occurrences (unit test source file name, functions,
variables, comments and preprocessors) of cqm with cmt.
[1] Please see Intel SDM, Volume 3, chapter 17 and section 18 for more
information on CMT: https://software.intel.com/content/www/us/en/develop/articles/intel-sdm.html
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
resctrl test suite accepts command line arguments (like -b, -t, -n and -p)
as documented in the help. But passing -n and -p throws an invalid option
error. This happens because -n and -p are missing in the list of
characters that getopt() recognizes as valid arguments. Hence, they are
treated as invalid options.
Fix this by adding them to the list of characters that getopt() recognizes
as valid arguments. Please note that the main() function already has the
logic to deal with the values passed as part of these arguments and hence
no changes are needed there.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The resctrl tests can accept a CPU on which the tests are run and use
default of CPU #1 if it is not provided. In the CAT test a "sibling CPU"
is determined that is from the same package where another thread will be
run.
The current algorithm with which a "sibling CPU" is determined does not
take the provided/default CPU into account and when that CPU is the
first CPU in a package then the "sibling CPU" will be selected to be the
same CPU since it starts by picking the first CPU from core_siblings_list.
Fix the "sibling CPU" selection by taking the provided/default CPU into
account and ensuring a sibling that is a different CPU is selected.
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Checking resctrl features call strcmp() to compare feature strings
(e.g. "mba", "cat" etc). The checkings are error prone and don't have
good coding style. Define the constant strings in macros and call
strncmp() to solve the potential issues.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reinette reported following compilation issue on Fedora 32, gcc version
10.1.1
/usr/bin/ld: resctrl_tests.o:<src_dir>/resctrl.h:65: multiple definition
of `bm_pid'; cache.o:<src_dir>/resctrl.h:65: first defined here
Other variables are ppid, tests_run, llc_occup_path, is_amd. Compiler
isn't happy because these variables are defined globally in two .c files
but are not declared as extern.
To fix issues for the global variables, declare them as extern.
Chang Log:
- Split this patch from v4's patch 1 (Shuah).
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Reinette reported following compilation issue on Fedora 32, gcc version
10.1.1
/usr/bin/ld: cqm_test.o:<src_dir>/cqm_test.c:22: multiple definition of
`cache_size'; cat_test.o:<src_dir>/cat_test.c:23: first defined here
The same issue is reported for long_mask, cbm_mask, count_of_bits etc
variables as well. Compiler isn't happy because these variables are
defined globally in two .c files namely cqm_test.c and cat_test.c and
the compiler during compilation finds that the variable is already
defined (multiple definition error).
Taking a closer look at the usage of these variables reveals that these
variables are used only locally in functions such as cqm_resctrl_val()
(defined in cqm_test.c) and cat_perf_miss_val() (defined in cat_test.c).
These variables are not shared between those functions. So, there is no
need for these variables to be global. Hence, fix this issue by making
them static variables.
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
David reported a buffer overflow error in the check_results() function of
the cmt unit test and he suggested enabling _FORTIFY_SOURCE gcc compiler
option to automatically detect any such errors.
Feature Test Macros man page describes_FORTIFY_SOURCE as below
"Defining this macro causes some lightweight checks to be performed to
detect some buffer overflow errors when employing various string and memory
manipulation functions (for example, memcpy, memset, stpcpy, strcpy,
strncpy, strcat, strncat, sprintf, snprintf, vsprintf, vsnprintf, gets, and
wide character variants thereof). For some functions, argument consistency
is checked; for example, a check is made that open has been supplied with a
mode argument when the specified flags include O_CREAT. Not all problems
are detected, just some common cases.
If _FORTIFY_SOURCE is set to 1, with compiler optimization level 1 (gcc
-O1) and above, checks that shouldn't change the behavior of conforming
programs are performed.
With _FORTIFY_SOURCE set to 2, some more checking is added, but some
conforming programs might fail.
Some of the checks can be performed at compile time (via macros logic
implemented in header files), and result in compiler warnings; other checks
take place at run time, and result in a run-time error if the check fails.
Use of this macro requires compiler support, available with gcc since
version 4.0."
Fix the buffer overflow error in the check_results() function of the cmt
unit test and enable _FORTIFY_SOURCE gcc check to catch any future buffer
overflow errors.
Reported-by: David Binderman <dcb314@hotmail.com>
Suggested-by: David Binderman <dcb314@hotmail.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-04-01
The following pull-request contains BPF updates for your *net-next* tree.
We've added 68 non-merge commits during the last 7 day(s) which contain
a total of 70 files changed, 2944 insertions(+), 1139 deletions(-).
The main changes are:
1) UDP support for sockmap, from Cong.
2) Verifier merge conflict resolution fix, from Daniel.
3) xsk selftests enhancements, from Maciej.
4) Unstable helpers aka kernel func calling, from Martin.
5) Batches ops for LPM map, from Pedro.
6) Fix race in bpf_get_local_storage, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-04-01
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 8 day(s) which contain
a total of 10 files changed, 151 insertions(+), 26 deletions(-).
The main changes are:
1) xsk creation fixes, from Ciara.
2) bpf_get_task_stack fix, from Dave.
3) trampoline in modules fix, from Jiri.
4) bpf_obj_get fix for links and progs, from Lorenz.
5) struct_ops progs must be gpl compatible fix, from Toke.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently it only support one page map/unmap once a time for dma-map
benchmark, but there are some other scenaries which need to support for
multi-page map/unmap: for those multi-pages interfaces such as
dma_alloc_coherent() and dma_map_sg(), the time spent on multi-pages
map/unmap is not the time of a single page * npages (not linear) as it
may use block description instead of page description when it is satified
with the size such as 2M/1G, and also it can send a single TLB invalidation
command to invalidate multi-pages instead of multi-times when RIL is
enabled (which will short the time of unmap). So it is necessary to add
support for multi-pages map/unmap.
Add a parameter "-g" to support multi-pages map/unmap.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Acked-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
s/Hisilicon/HiSilicon/g.
It should use capital S, according to
https://www.hisilicon.com/en/terms-of-use.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Acked-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
'struct target' is declared twice. One has been declared at 21st line.
Remove the duplicate.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kael_w@yeah.net
Link: http://lore.kernel.org/lkml/20210401062424.991737-1-wanjiabing@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the compiler emits: "CALL __x86_indirect_thunk_\reg" for an
indirect call, have objtool rewrite it to:
ALTERNATIVE "call __x86_indirect_thunk_\reg",
"call *%reg", ALT_NOT(X86_FEATURE_RETPOLINE)
Additionally, in order to not emit endless identical
.altinst_replacement chunks, use a global symbol for them, see
__x86_indirect_alt_*.
This also avoids objtool from having to do code generation.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151300.320177914@infradead.org
When the .altinstr_replacement is a retpoline, skip the alternative.
We already special case retpolines anyway.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151300.259429287@infradead.org
Track the reloc of instructions in the new instruction->reloc field
to avoid having to look them up again later.
( Technically x86 instructions can have two relocations, but not jumps
and calls, for which we're using this. )
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151300.195441549@infradead.org
Provide infrastructure for architectures to rewrite/augment compiler
generated retpoline calls. Similar to what we do for static_call()s,
keep track of the instructions that are retpoline calls.
Use the same list_head, since a retpoline call cannot also be a
static_call.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151300.130805730@infradead.org
Allow objtool to create undefined symbols; this allows creating
relocations to symbols not currently in the symbol table.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151300.064743095@infradead.org
Create a common helper to append strings to a strtab.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151259.941474004@infradead.org
We have 4 instances of adding a relocation. Create a common helper
to avoid growing even more.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151259.817438847@infradead.org
Instead of manually calling elf_rebuild_reloc_section() on sections
we've called elf_add_reloc() on, have elf_write() DTRT.
This makes it easier to add random relocations in places without
carefully tracking when we're done and need to flush what section.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151259.754213408@infradead.org
Currently, objtool generates tail call entries in add_jump_destination()
but waits until validate_branch() to generate the regular call entries.
Move these to add_call_destination() for consistency.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151259.691529901@infradead.org
The __x86_indirect_ naming is obviously not generic. Shorten to allow
matching some additional magic names later.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151259.630296706@infradead.org
Just like JMP handling, convert a direct CALL to a retpoline thunk
into a retpoline safe indirect CALL.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151259.567568238@infradead.org
Due to:
c9c324dc22 ("objtool: Support stack layout changes in alternatives")
it is now possible to simplify the retpolines.
Currently our retpolines consist of 2 symbols:
- __x86_indirect_thunk_\reg: the compiler target
- __x86_retpoline_\reg: the actual retpoline.
Both are consecutive in code and aligned such that for any one register
they both live in the same cacheline:
0000000000000000 <__x86_indirect_thunk_rax>:
0: ff e0 jmpq *%rax
2: 90 nop
3: 90 nop
4: 90 nop
0000000000000005 <__x86_retpoline_rax>:
5: e8 07 00 00 00 callq 11 <__x86_retpoline_rax+0xc>
a: f3 90 pause
c: 0f ae e8 lfence
f: eb f9 jmp a <__x86_retpoline_rax+0x5>
11: 48 89 04 24 mov %rax,(%rsp)
15: c3 retq
16: 66 2e 0f 1f 84 00 00 00 00 00 nopw %cs:0x0(%rax,%rax,1)
The thunk is an alternative_2, where one option is a JMP to the
retpoline. This was done so that objtool didn't need to deal with
alternatives with stack ops. But that problem has been solved, so now
it is possible to fold the entire retpoline into the alternative to
simplify and consolidate unused bytes:
0000000000000000 <__x86_indirect_thunk_rax>:
0: ff e0 jmpq *%rax
2: 90 nop
3: 90 nop
4: 90 nop
5: 90 nop
6: 90 nop
7: 90 nop
8: 90 nop
9: 90 nop
a: 90 nop
b: 90 nop
c: 90 nop
d: 90 nop
e: 90 nop
f: 90 nop
10: 90 nop
11: 66 66 2e 0f 1f 84 00 00 00 00 00 data16 nopw %cs:0x0(%rax,%rax,1)
1c: 0f 1f 40 00 nopl 0x0(%rax)
Notice that since the longest alternative sequence is now:
0: e8 07 00 00 00 callq c <.altinstr_replacement+0xc>
5: f3 90 pause
7: 0f ae e8 lfence
a: eb f9 jmp 5 <.altinstr_replacement+0x5>
c: 48 89 04 24 mov %rax,(%rsp)
10: c3 retq
17 bytes, we have 15 bytes NOP at the end of our 32 byte slot. (IOW, if
we can shrink the retpoline by 1 byte we can pack it more densely).
[ bp: Massage commit message. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210326151259.506071949@infradead.org
Currently, optimize_nops() scans to see if the alternative starts with
NOPs. However, the emit pattern is:
141: \oldinstr
142: .skip (len-(142b-141b)), 0x90
That is, when 'oldinstr' is short, the tail is padded with NOPs. This case
never gets optimized.
Rewrite optimize_nops() to replace any trailing string of NOPs inside
the alternative to larger NOPs. Also run it irrespective of patching,
replacing NOPs in both the original and replaced code.
A direct consequence is that 'padlen' becomes superfluous, so remove it.
[ bp:
- Adjust commit message
- remove a stale comment about needing to pad
- add a comment in optimize_nops()
- exit early if the NOP verif. loop catches a mismatch - function
should not not add NOPs in that case
- fix the "optimized NOPs" offsets output ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20210326151259.442992235@infradead.org
-----BEGIN PGP SIGNATURE-----
iQFRBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmBhB7AeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGCPUH+KKkSoOlN2YNu1oc
iy2nznwZoSQTk5ZLz7PypO/WWmmtgzudkObG7yqIURdrncsAkHR17Wu2P7rdBr1j
Ma+VhF9MQ+xx+r86upH7c3gYfhyfdUMvzuLy0rwLQ1Yrzrb7xFcVkj3BHk54TAQA
w05sRPuVJ3/c/HPYV2iXkkdnnMbXSTCebeDDwjFb9D3qagr4vcd/PjDHmGbfNF8R
o6gLpbK5Ly6ww1nth9gGGUjzrW95yVItvcroP6vQWljxhuy+NE1lXRm8LsGhxqtW
foFFptJup5nhSNJXWtQt/U3huVD6mZ3W3y9cOThPjXZRy2wva3I1IpBKoEFReUpG
/Tq8EA==
=tPUY
-----END PGP SIGNATURE-----
Merge tag 'v5.12-rc5' into WIP.x86/core, to pick up recent NOP related changes
In particular we want to have this upstream commit:
b90829704780: ("bpf: Use NOP_ATOMIC5 instead of emit_nops(&prog, 5) for BPF_TRAMP_F_CALL_ORIG")
... before merging in x86/cpu changes and the removal of the NOP optimizations, and
applying PeterZ's !retpoline objtool series.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prior to this commit xsk_socket__create(_shared) always attempted to create
the rx and tx rings for the socket. However this causes an issue when the
socket being setup is that which shares the fd with the UMEM. If a
previous call to this function failed with this socket after the rings were
set up, a subsequent call would always fail because the rings are not torn
down after the first call and when we try to set them up again we encounter
an error because they already exist. Solve this by remembering whether the
rings were set up by introducing new bools to struct xsk_umem which
represent the ring setup status and using them to determine whether or
not to set up the rings.
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331061218.1647-4-ciara.loftus@intel.com
If the call to xsk_socket__create fails, the user may want to retry the
socket creation using the same umem. Ensure that the umem is in the
same state on exit if the call fails by:
1. ensuring the umem _save pointers are unmodified.
2. not unmapping the set of umem rings that were set up with the umem
during xsk_umem__create, since those maps existed before the call to
xsk_socket__create and should remain in tact even in the event of
failure.
Fixes: 2f6324a393 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210331061218.1647-3-ciara.loftus@intel.com
Calls to xsk_socket__create dereference the umem to access the
fill_save and comp_save pointers. Make sure the umem is non-NULL
before doing this.
Fixes: 2f6324a393 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20210331061218.1647-2-ciara.loftus@intel.com
* Fixes for missing TLB flushes with TDP MMU
* Fixes for race conditions in nested SVM
* Fixes for lockdep splat with Xen emulation
* Fix for kvmclock underflow
* Fix srcdir != builddir builds
* Other small cleanups
ARM:
* Fix GICv3 MMIO compatibility probing
* Prevent guests from using the ARMv8.4 self-hosted tracing extension
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmBlum4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM5sgf9HmO3FOAhMZg6byK8lVBd5M+voNnx
0oC2EWhcT4uuEJ6MZN8CYGorHBtiMFGya5+USCINM9Te2u92jgBhqVaOsc3SRVfE
GPDbwcaSM2LP8T1Ao2ilaMSbcBEbphBrLbiBw2bToIuqDnFXUwL6psdBHyKKYRv+
LbtjfrapdB8lyll9BOhF4Iq0l74jcJEAkD/y7FlMCEgDLFCVpfbkA1HcdV/1oXsJ
+d6WKlAH9643V8HrMoX7jiXamnJVafkX2Q75Lay6xkkHtdB5wnbRFzfJGXELv9qi
6eJ7Oh5oNmrSUIrtdFkeGMdZZoJJgE9GwCXpeXM49VeqTUKkUEx9v9GAsg==
=5B67
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"It's a bit larger than I (and probably you) would like by the time we
get to -rc6, but perhaps not entirely unexpected since the changes in
the last merge window were larger than usual.
x86:
- Fixes for missing TLB flushes with TDP MMU
- Fixes for race conditions in nested SVM
- Fixes for lockdep splat with Xen emulation
- Fix for kvmclock underflow
- Fix srcdir != builddir builds
- Other small cleanups
ARM:
- Fix GICv3 MMIO compatibility probing
- Prevent guests from using the ARMv8.4 self-hosted tracing
extension"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Check that TSC page value is small after KVM_SET_CLOCK(0)
KVM: x86: Prevent 'hv_clock->system_time' from going negative in kvm_guest_time_update()
KVM: x86: disable interrupts while pvclock_gtod_sync_lock is taken
KVM: x86: reduce pvclock_gtod_sync_lock critical sections
KVM: SVM: ensure that EFER.SVME is set when running nested guest or on nested vmexit
KVM: SVM: load control fields from VMCB12 before checking them
KVM: x86/mmu: Don't allow TDP MMU to yield when recovering NX pages
KVM: x86/mmu: Ensure TLBs are flushed for TDP MMU during NX zapping
KVM: x86/mmu: Ensure TLBs are flushed when yielding during GFN range zap
KVM: make: Fix out-of-source module builds
selftests: kvm: make hardware_disable_test less verbose
KVM: x86/vPMU: Forbid writing to MSR_F15H_PERF MSRs when guest doesn't have X86_FEATURE_PERFCTR_CORE
KVM: x86: remove unused declaration of kvm_write_tsc()
KVM: clean up the unused argument
tools/kvm_stat: Add restart delay
KVM: arm64: Fix CPU interface MMIO compatibility detection
KVM: arm64: Disable guest access to trace filter controls
KVM: arm64: Hide system instruction access to Trace registers
Reusing BPF_SK_SKB_STREAM_VERDICT is possible but its name is
confusing and more importantly we still want to distinguish them
from user-space. So we can just reuse the stream verdict code but
introduce a new type of eBPF program, skb_verdict. Users are not
allowed to attach stream_verdict and skb_verdict programs to the
same map.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210331023237.41094-10-xiyou.wangcong@gmail.com
Instead of just reporting an assertion failure, report enough information
that we can start diagnosing exactly went wrong.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
The throbber could race with creation of the anchor entry and cause the
IDR to have zero entries in it, which would cause the test to fail.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
When run on a single CPU, this test would frequently access already-freed
memory. Due to timing, this bug never showed up on multi-CPU tests.
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Several test runners register individual worker threads with the
RCU library, but neglect to register the main thread, which can lead
to objects being freed while the main thread is in what appears to be
an RCU critical section.
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Add a test for the issue when KVM_SET_CLOCK(0) call could cause
TSC page value to go very big because of a signedness issue around
hv_clock->system_time.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210326155551.17446-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SO_TXTIME hardware offload requires testing across devices, either
between machines or separate network namespaces.
Split up SO_TXTIME test into tx and rx modes, so traffic can be
sent from one process to another. Create a veth-pair on different
namespaces and bind each process to an end point via [-S]ource and
[-D]estination parameters. Optional start [-t]ime parameter can be
passed to synchronize the test across the hosts (with synchorinzed
clocks).
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* make eprintf static, used only in main.c
* initialize ret in eprintf
* remove unused *tmp
v3:
* remove another err (Song Liu)
v2:
* remove unused 'int err = -1'
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210329223143.3659983-1-sdf@google.com
Add a helper to decode kernel instructions; there's no point in
endlessly repeating those last two arguments.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210326151259.379242587@infradead.org
'perf annotate' supports --symbol but it's impossible to filter a C++
symbol. With --no-demangle one can filter easily by mangled function
name.
Signed-off-by: Martin Liška <mliska@suse.cz>
Link: http://lore.kernel.org/lkml/c3c7e959-9f7f-18e2-e795-f604275cbac3@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The newly introduced -s command line option starts an interactive shell.
If a command is specified, the shell is started after the command
finishes executing. It's useful to have a shell especially when
debugging failing tests or developing new tests.
Since the user may terminate the VM forcefully, an extra "sync" is added
after the execution of the command to persist any logs from the command
into the log file.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210323014752.3198283-1-kpsingh@kernel.org
This patch added the testcases for removing the id 0 subflow and the id 0
address.
In do_transfer, use the removing addresses number '9' for deleting the id
0 address.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the id 0 address, different MPTCP connections could be using
different IP addresses for id 0.
This patch added an extra argument IP address for del_addr when
using id 0.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IDs are supposed to be between 0 and 255.
In pm_nl_ctl, for both the 'add' and 'get' instruction, the ID is casted
in a u_int8_t. So if we give 256, we will delete ID 0. Obviously, the
goal is not to delete this ID by giving 256.
We could modify pm_nl_ctl and stop if the ID is negative or higher than
255 but probably better not to increase the number of lines for such
things in this tool which is only used in selftests. Instead, we use it
within the limits.
This modification also means that we will no longer add a new ID for the
2nd entry. That's why we removed an expected entry from the dump and
introduced with
commit dc8eb10e95 ("selftests: mptcp: add testcases for setting the address ID").
So now we delete ID 9 like before and we add entries for IDs 10 to 255
that are deleted just after.
Note that this could be seen as a fix but it was not really an issue so
far: we were simply playing with ID 0/1 once again. With the following
commit ("selftests: mptcp: add addr argument for del_addr"), it will be
different because ID 0 is going to required an address. We don't want
errors when trying to delete ID 0 without the address argument.
Acked-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use act_simple to verify that action created with 'tc actions change'
command exists after command returns. The goal is to verify internal action
API reference counting to ensure that the case when netlink message has
NLM_F_REPLACE flag set but action with specified index doesn't exist is
handled correctly.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a bunch of virtual topologies and verify that
NETIF_F_GRO_FRAGLIST or NETIF_F_GRO_UDP_FWD-enabled
devices aggregate the ingress packets as expected.
Additionally check that the aggregate packets are
segmented correctly when landing on a socket
Also test SKB_GSO_FRAGLIST and SKB_GSO_UDP_L4 aggregation
on top of UDP tunnel (vxlan)
v1 -> v2:
- hopefully clarify the commit message
- moved the overlay network ipv6 range into the 'documentation'
reserved range (Willem)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 4bba4c4bb0 added tools/include/linux/compiler_types.h which
includes linux/compiler-gcc.h. Unfortunately, we had our own (empty)
compiler_types.h which overrode the one added by that commit, and
so we lost the definition of __must_be_array(). Removing our empty
compiler_types.h fixes the problem and reduces our divergence from the
rest of the tools.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
hardware_disable_test produces 512 snippets like
...
main: [511] waiting semaphore
run_test: [511] start vcpus
run_test: [511] all threads launched
main: [511] waiting 368us
main: [511] killing child
and this doesn't have much value, let's print this info with pr_debug().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210323104331.1354800-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If this service is enabled and the system rebooted, Systemd's initial
attempt to start this unit file may fail in case the kvm module is not
loaded. Since we did not specify a delay for the retries, Systemd
restarts with a minimum delay a number of times before giving up and
disabling the service. Which means a subsequent kvm module load will
have kvm running without monitoring.
Adding a delay to fix this.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20210325122949.1433271-1-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a test that is supposed to verify the persistence of BPF
resources based on underlying bpf_link usage.
Test will:
1) create and bind two sockets on queue ids 0 and 1
2) run a traffic on queue ids 0
3) remove xsk sockets from queue 0 on both veth interfaces
4) run a traffic on queues ids 1
Running traffic successfully on qids 1 means that BPF resources were
not removed on step 3).
In order to make it work, change the command that creates veth pair to
have the 4 queue pairs by default.
Introduce the arrays of xsks and umems to ifobject struct but keep a
pointers to single entities, so rest of the logic around Rx/Tx can be
kept as-is.
For umem handling, double the size of mmapped space and split that
between the two sockets.
Rename also bidi_pass to a variable 'second_step' of a boolean type as
it's now used also for the test that is introduced here and it doesn't
have anything in common with bi-directional testing.
Drop opt_queue command line argument as it wasn't working before anyway.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-15-maciej.fijalkowski@intel.com
Although thread_common_ops() are called in both Tx and Rx threads,
testapp_validate() will not spawn Tx thread until Rx thread signals that
it has finished its initialization via condition variable.
Therefore, locking in thread_common_ops is not needed and furthermore Tx
thread does not have to spin on atomic variable.
Note that this simplification wouldn't be possible if there would still
be a common worker thread.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-13-maciej.fijalkowski@intel.com
Currently, there is a testapp_sockets() that acts like a wrapper around
testapp_validate() and it is called for bidi and teardown test types.
Other test types call testapp_validate() directly.
Split testapp_sockets() onto two separate functions so a bunch of bidi
specific logic can be moved there and out of testapp_validate() itself.
Introduce function pointer to ifobject struct which will be used for
assigning the Rx/Tx function that is assigned to worker thread. Let's
also have a global ifobject Rx/Tx pointers so it's easier to swap the
vectors on a second run of a bi-directional test. Thread creation now is
easey to follow.
switching_notify variable is useless, info about vector switch can be
printed based on bidi_pass state.
Last but not least, init/destroy synchronization variables only once,
not per each test.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-12-maciej.fijalkowski@intel.com
Tx thread needs to be started after the Rx side is fully initialized so
that packets are not xmitted until xsk Rx socket is ready to be used.
It can be observed that atomic variable spinning_tx is not checked from
Rx side in any way, so thread_common_ops can be modified to only address
the spinning_rx. This means that spinning_tx can be removed altogheter.
signal_tx_condition is never utilized, so simply remove it.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-11-maciej.fijalkowski@intel.com
Let's a have a separate Tx/Rx worker threads instead of a one common
thread packed with Tx/Rx specific checks.
Move mmap for umem buffer space and a switch_namespace() call to
thread_common_ops.
This also allows for a bunch of simplifactions that are the subject of
the next commits. The final result will be a code base that is much
easier to follow.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-10-maciej.fijalkowski@intel.com
Currently, there is a dedicated thread for following remote ns operations:
- grabbing the ifindex of the interface moved to remote netns
- removing xdp prog from that interface
With bpf_link usage in place, this can be simply omitted, so remove
mentioned thread, as BPF resources will be managed by bpf_link itself,
so there's no further need for creating the thread that will switch to
remote netns and do the cleanup.
Keep most of the logic for switching the ns, though, but make
switch_namespace() return the fd so that it will be possible to close it
at the process termination time. Get rid of logic around making sure
that it's possible to switch ns in validate_interfaces().
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-9-maciej.fijalkowski@intel.com
Currently, if there are multiple xdpsock instances running on a single
interface and in case one of the instances is terminated, the rest of
them are left in an inoperable state due to the fact of unloaded XDP
prog from interface.
Consider the scenario below:
// load xdp prog and xskmap and add entry to xskmap at idx 10
$ sudo ./xdpsock -i ens801f0 -t -q 10
// add entry to xskmap at idx 11
$ sudo ./xdpsock -i ens801f0 -t -q 11
terminate one of the processes and another one is unable to work due to
the fact that the XDP prog was unloaded from interface.
To address that, step away from setting bpf prog in favour of bpf_link.
This means that refcounting of BPF resources will be done automatically
by bpf_link itself.
Provide backward compatibility by checking if underlying system is
bpf_link capable. Do this by looking up/creating bpf_link on loopback
device. If it failed in any way, stick with netlink-based XDP prog.
therwise, use bpf_link-based logic.
When setting up BPF resources during xsk socket creation, check whether
bpf_link for a given ifindex already exists via set of calls to
bpf_link_get_next_id -> bpf_link_get_fd_by_id -> bpf_obj_get_info_by_fd
and comparing the ifindexes from bpf_link and xsk socket.
For case where resources exist but they are not AF_XDP related, bail out
and ask user to remove existing prog and then retry.
Lastly, do a bit of refactoring within __xsk_setup_xdp_prog and pull out
existing code branches based on prog_id value onto separate functions
that are responsible for resource initialization if prog_id was 0 and
for lookup existing resources for non-zero prog_id as that implies that
XDP program is present on the underlying net device. This in turn makes
it easier to follow, especially the teardown part of both branches.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-7-maciej.fijalkowski@intel.com
Store offsets to each layer in a separate variables rather than compute
them every single time.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-6-maciej.fijalkowski@intel.com
For TEST_TYPE_STATS, worker_pkt_validate() that places frames onto
pkt_buf is not called. Therefore, when dump mode is set, don't call
worker_pkt_dump() for mentioned test type, so that it won't crash on
pkt_buf() access.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-2-maciej.fijalkowski@intel.com
Some OCaml developers reported that this bit of information is sometimes
useful for disambiguating functions for which the OCaml compiler assigns
the same name, e.g. nested or inlined functions.
Signed-off-by: Fabian Hemmer <copy@copy.sh>
Link: http://lore.kernel.org/lkml/20210226075223.p3s5oz4jbxwnqjtv@nyu
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch updates the README.rst to specify the clang requirement
to compile the bpf selftests that call kernel function.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210330054156.2933804-1-kafai@fb.com
Test that two sampling rules cannot be configured on the same port with
the same trigger.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can only offload matchall rules that do not match on a
protocol. Test that matchall rules that match on a protocol are vetoed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that all possible combinations of inner and outer ECN bits result
in the correct inner ECN marking according to RFC 6040 4.2.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop the 'beginning of kernel-doc' notation markers (/**)
in places that are not in kernel-doc format.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210325200820.16594-1-rdunlap@infradead.org
Test tc-police action for packets per second.
The test is mainly in scenarios Rx policing and Tx policing.
The test passes with veth pairs ports.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add selftest cases in action police for packets per second.
These tests depend on corresponding iproute2 command support.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records.
- Fix 'perf top' BPF support related crash with perf_event_paranoid=3 + kptr_restrict.
- Validate raw event with sysfs exported format bits.
- Fix waipid on SIGCHLD delivery bugs in 'perf daemon'.
- Change to use bash for daemon test on Debian, where the default is dash and
thus fails for use of bashisms in this test.
- Fix memory leak in vDSO found using ASAN.
- Remove now useless (due to the fact taht BPF now supports static vars)
failing sub test "BPF relocation checker".
- Fix auxtrace queue conflict.
- Sync linux/kvm.h with the kernel sources.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYGDHswAKCRCyPKLppCJ+
J765AQDJNsaxs3RximgY503X6pguLSrMY/uBq9XB2uYCeM3xRgEA1h4nIFCOE06V
s/kOphsfgbUu2UTD1rtCM2olZRzS1AU=
=kpj/
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Avoid write of uninitialized memory when generating PERF_RECORD_MMAP*
records.
- Fix 'perf top' BPF support related crash with perf_event_paranoid=3 +
kptr_restrict.
- Validate raw event with sysfs exported format bits.
- Fix waipid on SIGCHLD delivery bugs in 'perf daemon'.
- Change to use bash for daemon test on Debian, where the default is
dash and thus fails for use of bashisms in this test.
- Fix memory leak in vDSO found using ASAN.
- Remove now useless (due to the fact that BPF now supports static
vars) failing sub test "BPF relocation checker".
- Fix auxtrace queue conflict.
- Sync linux/kvm.h with the kernel sources.
* tag 'perf-tools-fixes-for-v5.12-2020-03-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf test: Change to use bash for daemon test
perf record: Fix memory leak in vDSO found using ASAN
perf test: Remove now useless failing sub test "BPF relocation checker"
perf daemon: Return from kill functions
perf daemon: Force waipid for all session on SIGCHLD delivery
perf top: Fix BPF support related crash with perf_event_paranoid=3 + kptr_restrict
perf pmu: Validate raw event with sysfs exported format bits
perf synthetic events: Avoid write of uninitialized memory when generating PERF_RECORD_MMAP* records
tools headers UAPI: Sync linux/kvm.h with the kernel sources
perf synthetic-events: Fix uninitialized 'kernel_thread' variable
perf auxtrace: Fix auxtrace queue conflict
This patch adds a few kernel function bpf_kfunc_call_test*() for the
selftest's test_run purpose. They will be allowed for tc_cls prog.
The selftest calling the kernel function bpf_kfunc_call_test*()
is also added in this patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015252.1551395-1-kafai@fb.com
This patch removes the bpf implementation of tcp_slow_start()
and tcp_cong_avoid_ai(). Instead, it directly uses the kernel
implementation.
It also replaces the bpf_cubic_undo_cwnd implementation by directly
calling tcp_reno_undo_cwnd(). bpf_dctcp also directly calls
tcp_reno_cong_avoid() instead.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015246.1551062-1-kafai@fb.com
As a similar chanage in the kernel, this patch gives the proper
name to the bpf cubic.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015240.1550074-1-kafai@fb.com
This patch is to make libbpf able to handle the following extern
kernel function declaration and do the needed relocations before
loading the bpf program to the kernel.
extern int foo(struct sock *) __attribute__((section(".ksyms")))
In the collect extern phase, needed changes is made to
bpf_object__collect_externs() and find_extern_btf_id() to collect
extern function in ".ksyms" section. The func in the BTF datasec also
needs to be replaced by an int var. The idea is similar to the existing
handling in extern var. In case the BTF may not have a var, a dummy ksym
var is added at the beginning of bpf_object__collect_externs()
if there is func under ksyms datasec. It will also change the
func linkage from extern to global which the kernel can support.
It also assigns a param name if it does not have one.
In the collect relo phase, it will record the kernel function
call as RELO_EXTERN_FUNC.
bpf_object__resolve_ksym_func_btf_id() is added to find the func
btf_id of the running kernel.
During actual relocation, it will patch the BPF_CALL instruction with
src_reg = BPF_PSEUDO_FUNC_CALL and insn->imm set to the running
kernel func's btf_id.
The required LLVM patch: https://reviews.llvm.org/D93563
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015234.1548923-1-kafai@fb.com
This patch records the extern sym relocs first before recording
subprog relocs. The later patch will have relocs for extern
kernel function call which is also using BPF_JMP | BPF_CALL.
It will be easier to handle the extern symbols first in
the later patch.
is_call_insn() helper is added. The existing is_ldimm64() helper
is renamed to is_ldimm64_insn() for consistency.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015227.1548623-1-kafai@fb.com
This patch renames RELO_EXTERN to RELO_EXTERN_VAR.
It is to avoid the confusion with a later patch adding
RELO_EXTERN_FUNC.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015221.1547722-1-kafai@fb.com
This patch refactors code, that finds kernel btf_id by kind
and symbol name, to a new function find_ksym_btf_id().
It also adds a new helper __btf_kind_str() to return
a string by the numeric kind value.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015214.1547069-1-kafai@fb.com
This patch refactors most of the logic from
bpf_object__resolve_ksyms_btf_id() into a new function
bpf_object__resolve_ksym_var_btf_id().
It is to get ready for a later patch adding
bpf_object__resolve_ksym_func_btf_id() which resolves
a kernel function to the running kernel btf_id.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015207.1546749-1-kafai@fb.com
This patch adds support to BPF verifier to allow bpf program calling
kernel function directly.
The use case included in this set is to allow bpf-tcp-cc to directly
call some tcp-cc helper functions (e.g. "tcp_cong_avoid_ai()"). Those
functions have already been used by some kernel tcp-cc implementations.
This set will also allow the bpf-tcp-cc program to directly call the
kernel tcp-cc implementation, For example, a bpf_dctcp may only want to
implement its own dctcp_cwnd_event() and reuse other dctcp_*() directly
from the kernel tcp_dctcp.c instead of reimplementing (or
copy-and-pasting) them.
The tcp-cc kernel functions mentioned above will be white listed
for the struct_ops bpf-tcp-cc programs to use in a later patch.
The white listed functions are not bounded to a fixed ABI contract.
Those functions have already been used by the existing kernel tcp-cc.
If any of them has changed, both in-tree and out-of-tree kernel tcp-cc
implementations have to be changed. The same goes for the struct_ops
bpf-tcp-cc programs which have to be adjusted accordingly.
This patch is to make the required changes in the bpf verifier.
First change is in btf.c, it adds a case in "btf_check_func_arg_match()".
When the passed in "btf->kernel_btf == true", it means matching the
verifier regs' states with a kernel function. This will handle the
PTR_TO_BTF_ID reg. It also maps PTR_TO_SOCK_COMMON, PTR_TO_SOCKET,
and PTR_TO_TCP_SOCK to its kernel's btf_id.
In the later libbpf patch, the insn calling a kernel function will
look like:
insn->code == (BPF_JMP | BPF_CALL)
insn->src_reg == BPF_PSEUDO_KFUNC_CALL /* <- new in this patch */
insn->imm == func_btf_id /* btf_id of the running kernel */
[ For the future calling function-in-kernel-module support, an array
of module btf_fds can be passed at the load time and insn->off
can be used to index into this array. ]
At the early stage of verifier, the verifier will collect all kernel
function calls into "struct bpf_kfunc_desc". Those
descriptors are stored in "prog->aux->kfunc_tab" and will
be available to the JIT. Since this "add" operation is similar
to the current "add_subprog()" and looking for the same insn->code,
they are done together in the new "add_subprog_and_kfunc()".
In the "do_check()" stage, the new "check_kfunc_call()" is added
to verify the kernel function call instruction:
1. Ensure the kernel function can be used by a particular BPF_PROG_TYPE.
A new bpf_verifier_ops "check_kfunc_call" is added to do that.
The bpf-tcp-cc struct_ops program will implement this function in
a later patch.
2. Call "btf_check_kfunc_args_match()" to ensure the regs can be
used as the args of a kernel function.
3. Mark the regs' type, subreg_def, and zext_dst.
At the later do_misc_fixups() stage, the new fixup_kfunc_call()
will replace the insn->imm with the function address (relative
to __bpf_call_base). If needed, the jit can find the btf_func_model
by calling the new bpf_jit_find_kfunc_model(prog, insn).
With the imm set to the function address, "bpftool prog dump xlated"
will be able to display the kernel function calls the same way as
it displays other bpf helper calls.
gpl_compatible program is required to call kernel function.
This feature currently requires JIT.
The verifier selftests are adjusted because of the changes in
the verbose log in add_subprog_and_kfunc().
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210325015142.1544736-1-kafai@fb.com
This patch adds testcases for signalling multi valid and invalid
addresses for both signal_address_tests and remove_tests.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added the timeout testcases for multi addresses, valid and
invalid.
These testcases need to transmit 8 ADD_ADDRs, so add a new speed level
'least' to set 10 to mptcp_connect to slow down the transmitting process.
The original speed level 'slow' still uses 50.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some testcases, we need to slow down the transmitting process. This
patch added a new argument named cfg_do_w for cfg_remove to allow the
caller to pass an argument to cfg_remove.
In do_rnd_write, use this cfg_do_w to control the transmitting speed.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a spelling mistake in a comment. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the following command produces an error message:
linux# make kselftest TARGETS=bpf O=/mnt/linux-build
# selftests: bpf: test_libbpf.sh
# ./test_libbpf.sh: line 23: ./test_libbpf_open: No such file or directory
# test_libbpf: failed at file test_l4lb.o
# selftests: test_libbpf [FAILED]
The error message might not affect the return code of make, therefore
one needs to grep make output in order to detect it.
This is not the only instance of the same underlying problem; any test
with more than one element in $(TEST_PROGS) fails the same way. Another
example:
linux# make O=/mnt/linux-build TARGETS=splice kselftest
[...]
# ./short_splice_read.sh: 15: ./splice_read: not found
# FAIL: /sys/module/test_module/sections/.init.text 2
not ok 2 selftests: splice: short_splice_read.sh # exit=1
The current logic prepends $(OUTPUT) only to the first member of
$(TEST_PROGS). After that, run_one() does
cd `dirname $TEST`
For all tests except the first one, `dirname $TEST` is ., which means
they cannot access the files generated in $(OUTPUT).
Fix by using $(addprefix) to prepend $(OUTPUT)/ to each member of
$(TEST_PROGS).
Fixes: 1a940687e4 ("selftests: lib.mk: copy test scripts and test files for make O=dir run")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This adds a selftest to check that the verifier rejects a TCP CC struct_ops
with a non-GPL license.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20210326100314.121853-2-toke@redhat.com
Ensure that BPF static linker preserves all DATASEC BTF types, even if some of
them might not have any variable information at all. This may happen if the
compiler promotes local initialized variable contents into .rodata section and
there are no global or static functions in the program.
For example,
$ cat t.c
struct t { char a; char b; char c; };
void bar(struct t*);
void find() {
struct t tmp = {1, 2, 3};
bar(&tmp);
}
$ clang -target bpf -O2 -g -S t.c
.long 104 # BTF_KIND_DATASEC(id = 8)
.long 251658240 # 0xf000000
.long 0
.ascii ".rodata" # string offset=104
$ clang -target bpf -O2 -g -c t.c
$ readelf -S t.o | grep data
[ 4] .rodata PROGBITS 0000000000000000 00000090
Fixes: 8fd27bf69b ("libbpf: Add BPF static linker BTF and BTF.ext support")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210326043036.3081011-1-andrii@kernel.org
Fix several problems in kernel-doc notation in gpio-utils.c.
gpio-utils.c:37: warning: Incorrect use of kernel-doc format: * gpiotools_request_line() - request gpio lines in a gpiochip
gpio-utils.c:61: warning: expecting prototype for doc(). Prototype was for gpiotools_request_line() instead
gpio-utils.c:265: warning: Excess function parameter 'value' description in 'gpiotools_sets'
gpio-utils.c:1: warning: 'gpiotools_request_lines' not found
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
The option '-d/--device' was implemented in 'usbip list' but not
shown in usage. Hence this commit adds this option to usage.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hongren Zheng <i@zenithal.me>
Link: https://lore.kernel.org/r/YFrwq75Uyef3c9gz@Sun
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit e0546fd8b7 ("usbip: tools: Start using VUDC backend in
usbip tools") implemented device mode for user space tools, however the
corresponding options are not documented in man page.
This commit documents the options and provides examples on device mode.
Also the command `usbip port` is documented.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Hongren Zheng <i@zenithal.me>
Link: https://lore.kernel.org/r/YFrdyKKx1nx8bktm@Sun
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In list.h, the kernel-doc for list_del() should be immediately
preceding the implementation and not separated from it by
another function implementation.
Eliminates this kernel-doc error:
list.h:1: warning: 'list_del' not found
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210325174724.14447-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When executing the daemon test on Arm64 and x86 with Debian (Buster)
distro, both skip the test case with the log:
# ./perf test -v 76
76: daemon operations :
--- start ---
test child forked, pid 11687
test daemon list
trap: SIGINT: bad trap
./tests/shell/daemon.sh: 173: local: cpu-clock: bad variable name
test child finished with -2
---- end ----
daemon operations: Skip
So the error happens for the variable expansion when use local variable
in the shell script. Since Debian Buster uses dash but not bash as
non-interactive shell, when execute the daemon testing, it hits a known
issue for dash which was reported [1].
To resolve this issue, one option is to add double quotes for all local
variables assignment, so need to change the code from:
local line=`perf daemon --config ${config} -x: | head -2 | tail -1`
... to:
local line="`perf daemon --config ${config} -x: | head -2 | tail -1`"
But the testing script has bunch of local variables, this leads to big
changes for whole script.
On the other hand, the testing script asks to use the "local" feature
which is bash-specific, so this patch explicitly uses "#!/bin/bash" to
ensure running the script with bash.
After:
# ./perf test -v 76
76: daemon operations :
--- start ---
test child forked, pid 11329
test daemon list
test daemon reconfig
test daemon stop
test daemon signal
signal 12 sent to session 'test [11596]'
signal 12 sent to session 'test [11596]'
test daemon ping
test daemon lock
test child finished with 0
---- end ----
daemon operations: Ok
[1] https://bugs.launchpad.net/ubuntu/+source/dash/+bug/139097
Fixes: 2291bb915b ("perf tests: Add daemon 'list' command test")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210320104554.529213-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The sort dimension "p_stage_cyc" is used to represent pipeline
stage cycle information. Presently, this is used only in powerpc.
For unsupported platforms, we don't want to display it
in the perf report output columns. Hence add check in sort_dimension__add()
and skip the sort key incase it is not applicable for the particular arch.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/1616425047-1666-6-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The pipeline stage cycles details can be recorded on powerpc from the
contents of Performance Monitor Unit (PMU) registers. On ISA v3.1
platform, sampling registers exposes the cycles spent in different
pipeline stages. Patch adds perf tools support to present two of the
cycle counter information along with memory latency (weight).
Re-use the field 'ins_lat' for storing the first pipeline stage cycle.
This is stored in 'var2_w' field of 'perf_sample_weight'.
Add a new field 'p_stage_cyc' to store the second pipeline stage cycle
which is stored in 'var3_w' field of perf_sample_weight.
Add new sort function 'Pipeline Stage Cycle' and include this in
default_mem_sort_order[]. This new sort function may be used to denote
some other pipeline stage in another architecture. So add this to list
of sort entries that can have dynamic header string.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/1616425047-1666-5-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add arch specific arch_evsel__set_sample_weight() to set the new
sample type for powerpc.
Add arch specific arch_perf_parse_sample_weight() to store the
sample->weight values depending on the sample type applied.
if the new sample type (PERF_SAMPLE_WEIGHT_STRUCT) is applied,
store only the lower 32 bits to sample->weight. If sample type
is 'PERF_SAMPLE_WEIGHT', store the full 64-bit to sample->weight.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/1616425047-1666-4-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the header string for different columns in perf report is
fixed. Some fields of perf sample could have different meaning for
different architectures than the meaning conveyed by the header string.
An example is the new field 'var2_w' of perf_sample_weight structure.
This is presently captured as 'Local INSTR Latency' in perf mem report.
But this could be used to denote a different latency cycle in another
architecture.
Introduce a weak function arch_perf_header_entry() to set the arch
specific header string for the fields which can contain dynamic header.
If the architecture do not have this function, fall back to the default
header string value.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/1616425047-1666-3-git-send-email-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Big set in here from Alexandru Ardelean enabling multiple buffer support.
This includes providing a new directory per buffer that combines
what was previously in buffer/ and scan_elements/. Old interfaces still
in place for compatiblity.
Note immuatable branch for scmi patches to allow for some significant
rework going on in that subsystem. Merge required updating to reflect
some changes in IIO.
Late rebase to fix some wrong fixes tags due to some earlier rebases
made necessary by messing up the immutable branch.
IIO New Device Support
* adi,ad5686
- Add info to support AD5673R and AD5677R
* bosch,bmi088
- New driver supporting this accelerometer + gyroscope
* cros_ec_mkbp
- New driver for this proximity sensor that exposes a 'front'
sensor. Very simple switch like device, but driver allows it
to share interface with more sophisticated proximity sensors.
* iio_scmi
- New driver to support ARM SCMI protocol to expose underlying
accelerometers and gyroscopes via this firmware interface.
* st,st_magn
- Add ID for IISMDC magnetometer.
* ti,ads131e0
- New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs
Counter New Device Support
* IRQ or GPIO based counter
- New driver for a conceptually simple counter that uses interrupts
to perform the count.
Features
* core
- Dual buffer supprt including:
Various helpers to centralize handling of bufferer related elements.
Document existing and new IOCTLs
Register the IIO chrdev only if it can actually be used for anything.
Rework attribute group creation in the core (lots of patches)
Merge buffer/ and scan_elements/ entries into one list + maintain
backwards compatible set.
Introduce the internal logic and IOCTL to allow multiple buffers
+ access to an anon FD per buffer to actually read from it.
Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
Update ABI docs.
A few follow up fixes, unsuprising as this was a huge bit of rework.
- Move common case setting of trig->parent to the core.
- Provide an iio_read_channel_processed_scale() to avoid loss of
precision from iio_read_channel_processed() then applying integer
scale. Use it in ntc_thermistor driver in hwmon.
- Allow drivers to specify labels from elsewhere than DT. Use it for
bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
- Document label usage for proximity and accelerometer sensors.
- Some local variable renames for consistency
tools
- Add -a parameter to iio_event_monitor to allow autoenabling of events.
* acpi_als
- Add trigger support for devices that don't support notification method.
* adi,ad7124
- Allow more than 8 channels. This is a complex little device, but is
capable of supporting up to 16 channels if the share certain
configuration settings.
* hrtimer-trigger
- Support sampling frequency below 1Hz.
* mediatek,mt8195-auxadc
- Add compatible to binding docs (always also includes mt8173)
* st,stm32-adc
- Enable timetamps when not using DMA.
* vishay,vcnl3020
- Sampling frequency control.
Cleanup and minor fixes:
* treewide
- Use some getter and setter functions instead of opencoding.
- Set of fixes for pointless casts in various drivers.
- Avoid wrong kernel-doc marking on comment blocks.
- Fix various other minor kernel-doc issues shown by W=1
* core
- Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
- Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
- Add unit tests for iio_format_value()
* docs
- Fix formatting/typos in iio_configfs.rst and buffers.rst
- Add documentation of index in buffers.rst
- Fix scan element description
- Avoid some issues with HTML generation from ABI docs by moving
duplicated defintions to more generic files.
- Drop reference to long dead mailing list.
* 104-quad
- Remove left over deprecated IIO counter ABI.
* adi,adi-axi-adc
- Fix wrong bit of docs.
* adi,ad5791
- Typos
* adi,ad9834
- Switch to device managed functions in probe.
* adi,adis*
- Add and use helpers for locking to reduced duplication.
* adi,adis16480
- Fix calculation of sampling frequency when using pulse per second input.
* adi,adis16475
- Calculate the IMU scaled internal sampling rate and runtime depending
on sysfs based configuration rather than getting from DT. Drop now
unnecessary property from DT bindings doc.
* cros_ec
- Fix result of a series of recent changes that means extended buffer
attributes turn up in the wrong place. Too complex to revert the
various patches unfortunately so this is a bit messy.
* fsl,mma3452
- Indentation cleanup.
* hid-sensors
- Size of storage needs to increase for some parts when using quaternions.
- Move the get sensistivity attribute to hid-sensors-common to reduce
duplication. Enable it for more device types.
- Correctly handle relative sensitivity if reported that way including
documenting the new ABI.
* maxim,max517
- Use device managed functions in probe.
* mediatek,mt6360-adc
- Use asm/unaligned.h instead of directly including
unaligned/be_byteshift.h
* novuton,npcm-adc
- Local lock instead of missusing mlock.
* semtech,sx9500
- Typos
* st,sensor
- typo fix
* st,spear-adc
- Local lock instead of missusing mlock.
* st,stm32-adc
- Long standing HAS_IOMEM dependency fix.
* st,stm32-counter
- Remove left over deprecated IIO counter ABI.
* ti,palmas-adc
- Local lock instead of missusing mlock.
* ti,tmp007
- Switch to device managed functions in probe.
Other
* MAINTAINERS
- Move Peter Meerwald-Stadler to Credits at his request
-----BEGIN PGP SIGNATURE-----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=jeRJ
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
1st set of IIO/counter device support, features and cleanup in the 5.13 cycle
Big set in here from Alexandru Ardelean enabling multiple buffer support.
This includes providing a new directory per buffer that combines
what was previously in buffer/ and scan_elements/. Old interfaces still
in place for compatiblity.
Note immuatable branch for scmi patches to allow for some significant
rework going on in that subsystem. Merge required updating to reflect
some changes in IIO.
Late rebase to fix some wrong fixes tags due to some earlier rebases
made necessary by messing up the immutable branch.
IIO New Device Support
* adi,ad5686
- Add info to support AD5673R and AD5677R
* bosch,bmi088
- New driver supporting this accelerometer + gyroscope
* cros_ec_mkbp
- New driver for this proximity sensor that exposes a 'front'
sensor. Very simple switch like device, but driver allows it
to share interface with more sophisticated proximity sensors.
* iio_scmi
- New driver to support ARM SCMI protocol to expose underlying
accelerometers and gyroscopes via this firmware interface.
* st,st_magn
- Add ID for IISMDC magnetometer.
* ti,ads131e0
- New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs
Counter New Device Support
* IRQ or GPIO based counter
- New driver for a conceptually simple counter that uses interrupts
to perform the count.
Features
* core
- Dual buffer supprt including:
Various helpers to centralize handling of bufferer related elements.
Document existing and new IOCTLs
Register the IIO chrdev only if it can actually be used for anything.
Rework attribute group creation in the core (lots of patches)
Merge buffer/ and scan_elements/ entries into one list + maintain
backwards compatible set.
Introduce the internal logic and IOCTL to allow multiple buffers
+ access to an anon FD per buffer to actually read from it.
Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
Update ABI docs.
A few follow up fixes, unsuprising as this was a huge bit of rework.
- Move common case setting of trig->parent to the core.
- Provide an iio_read_channel_processed_scale() to avoid loss of
precision from iio_read_channel_processed() then applying integer
scale. Use it in ntc_thermistor driver in hwmon.
- Allow drivers to specify labels from elsewhere than DT. Use it for
bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
- Document label usage for proximity and accelerometer sensors.
- Some local variable renames for consistency
tools
- Add -a parameter to iio_event_monitor to allow autoenabling of events.
* acpi_als
- Add trigger support for devices that don't support notification method.
* adi,ad7124
- Allow more than 8 channels. This is a complex little device, but is
capable of supporting up to 16 channels if the share certain
configuration settings.
* hrtimer-trigger
- Support sampling frequency below 1Hz.
* mediatek,mt8195-auxadc
- Add compatible to binding docs (always also includes mt8173)
* st,stm32-adc
- Enable timetamps when not using DMA.
* vishay,vcnl3020
- Sampling frequency control.
Cleanup and minor fixes:
* treewide
- Use some getter and setter functions instead of opencoding.
- Set of fixes for pointless casts in various drivers.
- Avoid wrong kernel-doc marking on comment blocks.
- Fix various other minor kernel-doc issues shown by W=1
* core
- Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
- Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
- Add unit tests for iio_format_value()
* docs
- Fix formatting/typos in iio_configfs.rst and buffers.rst
- Add documentation of index in buffers.rst
- Fix scan element description
- Avoid some issues with HTML generation from ABI docs by moving
duplicated defintions to more generic files.
- Drop reference to long dead mailing list.
* 104-quad
- Remove left over deprecated IIO counter ABI.
* adi,adi-axi-adc
- Fix wrong bit of docs.
* adi,ad5791
- Typos
* adi,ad9834
- Switch to device managed functions in probe.
* adi,adis*
- Add and use helpers for locking to reduced duplication.
* adi,adis16480
- Fix calculation of sampling frequency when using pulse per second input.
* adi,adis16475
- Calculate the IMU scaled internal sampling rate and runtime depending
on sysfs based configuration rather than getting from DT. Drop now
unnecessary property from DT bindings doc.
* cros_ec
- Fix result of a series of recent changes that means extended buffer
attributes turn up in the wrong place. Too complex to revert the
various patches unfortunately so this is a bit messy.
* fsl,mma3452
- Indentation cleanup.
* hid-sensors
- Size of storage needs to increase for some parts when using quaternions.
- Move the get sensistivity attribute to hid-sensors-common to reduce
duplication. Enable it for more device types.
- Correctly handle relative sensitivity if reported that way including
documenting the new ABI.
* maxim,max517
- Use device managed functions in probe.
* mediatek,mt6360-adc
- Use asm/unaligned.h instead of directly including
unaligned/be_byteshift.h
* novuton,npcm-adc
- Local lock instead of missusing mlock.
* semtech,sx9500
- Typos
* st,sensor
- typo fix
* st,spear-adc
- Local lock instead of missusing mlock.
* st,stm32-adc
- Long standing HAS_IOMEM dependency fix.
* st,stm32-counter
- Remove left over deprecated IIO counter ABI.
* ti,palmas-adc
- Local lock instead of missusing mlock.
* ti,tmp007
- Switch to device managed functions in probe.
Other
* MAINTAINERS
- Move Peter Meerwald-Stadler to Credits at his request
* tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (119 commits)
iio: acpi_als: Add trigger support
iio: acpi_als: Add local variable dev in probe
iio: acpi_als: Add timestamp channel
iio: adc: ad7292: Modify the bool initialization assignment
iio: cros: unify hw fifo attributes without API changes
iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant
iio: event_monitor: Enable events before monitoring
dt-bindings: iio: adc: Add compatible for Mediatek MT8195
iio:magnetometer: Add Support for ST IIS2MDC
dt-bindings: iio: st,st-sensors add IIS2MDC.
staging: iio: ad9832: kernel-doc fixes
iio:dac:max517.c: Use devm_iio_device_register()
iio:cros_ec_sensors: Fix a wrong function name in kernel doc.
iio: buffer: kfifo_buf: kernel-doc, typo in function name.
iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names.
iio: adc: adi-axi-adc: Drop false marking for kernel-doc
iio: adc: cpcap-adc: kernel-doc fix - that should be _ in structure name
iio: dac: ad5504: fix wrong part number in kernel-doc structure name.
iio: dac: ad5770r: kernel-doc fix case of letter R wrong in structure name
iio: adc: ti-adc084s021: kernel-doc fixes, missing function names
...
The current code bails out with negative and positive returns.
If the callback returns a positive return code, 'ring_buffer__consume()'
and 'ring_buffer__poll()' will return a spurious number of records
consumed, but mostly important will continue the processing loop.
This patch makes positive returns from the callback a no-op.
Fixes: bf99c936f9 ("libbpf: Add BPF ring buffer support")
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210325150115.138750-1-pctammela@mojatatu.com
Unfortunately some distros don't have their kernel version defined
accurately in <linux/version.h> due to different long term support
reasons.
It is important to have a way to override the bpf kern_version
attribute during runtime: some old kernels might still check for
kern_version attribute during bpf_prog_load().
Signed-off-by: Rafael David Tinoco <rafaeldtinoco@ubuntu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210323040952.2118241-1-rafaeldtinoco@ubuntu.com
Uses the already existing infrastructure for testing batched ops.
The testing code is essentially the same, with minor tweaks for this use
case.
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210323025058.315763-3-pctammela@gmail.com
The current implementation uses the CHECK_FAIL macro which does not
provide useful error messages when the script fails. Use the CHECK macro
instead and provide more descriptive messages to aid debugging.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210322170720.2926715-1-kpsingh@kernel.org
bpf_program__get_type() and bpf_program__get_expected_attach_type() shouldn't
modify given bpf_program, so mark input parameter as const struct bpf_program.
This eliminates unnecessary compilation warnings or explicit casts in user
programs.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210324172941.2609884-1-andrii@kernel.org
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-03-24
The following pull-request contains BPF updates for your *net-next* tree.
We've added 37 non-merge commits during the last 15 day(s) which contain
a total of 65 files changed, 3200 insertions(+), 738 deletions(-).
The main changes are:
1) Static linking of multiple BPF ELF files, from Andrii.
2) Move drop error path to devmap for XDP_REDIRECT, from Lorenzo.
3) Spelling fixes from various folks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
After some painful sessions with a driver that register an
enable/disable sysfs knob (gp2ap002) and manually going
in and enabling the event before monitoring it:
cd /sys/bus/iio/devices/iio\:device2/events
# ls
in_proximity_thresh_either_en
# echo 1 > in_proximity_thresh_either_en
I realized that it's better if the iio_event_monitor is
smart enough to enable all events by itself and disable them
after use, if passed the -a flag familiar from the
iio_generic_buffer tool.
Auto-enabling events depend on the hardware being able
to handle all events at the same time which isn't
necessarily the case, so a command line option is required
for this.
Cc: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210319135301.542911-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Merge misc fixes from Andrew Morton:
"14 patches.
Subsystems affected by this patch series: mm (hugetlb, kasan, gup,
selftests, z3fold, kfence, memblock, and highmem), squashfs, ia64,
gcov, and mailmap"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mailmap: update Andrey Konovalov's email address
mm/highmem: fix CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP
mm: memblock: fix section mismatch warning again
kfence: make compatible with kmemleak
gcov: fix clang-11+ support
ia64: fix format strings for err_inject
ia64: mca: allocate early mca with GFP_ATOMIC
squashfs: fix xattr id and id lookup sanity checks
squashfs: fix inode lookup sanity checks
z3fold: prevent reclaim/free race for headless pages
selftests/vm: fix out-of-tree build
mm/mmu_notifiers: ensure range_end() is paired with range_start()
kasan: fix per-page tags for non-page_alloc pages
hugetlb_cgroup: fix imbalanced css_get and css_put pair for shared mappings
- Fix possible memory hotplug failure with KASLR
- Fix FFR value in SVE kselftest
- Fix backtraces reported in /proc/$pid/stack
- Disable broken CnP implementation on NVIDIA Carmel
- Typo fixes and ACPI documentation clarification
- Fix some W=1 warnings
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmBccr0QHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNG6UCACDbz3BO/y40wRhWwMhvDhyFDqtlTlVEQlb
hxnJzksXOlbqHB1J7yamzXxS1UlCBlhvjrFNTe1s5LJIfB0niMskYLe2p0dJ/voi
WyysvaiK7/1bZV/RRdF7r+hFtMPHBEAKfgs+ZxFN9mnMcserV8PWqiD5ookCqavE
xatE/fEgVujiISl/BOkP1pnmWnPM4f9BIMS5DgaZJsNDYtxeu9a3RGnfu9vNHaP2
gxq5+E3BjZfh1z0++HP6nTuDbdDaxEz12gyoZ+4wejXVhwj1g7NySJNa8RmJG9pU
gX+jE6HOgeCFIEe9Gx+I2QtAaFia96HVnAAHagGBHB1vfV7GTRxN
=tzbO
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Minor fixes all over, ranging from typos to tests to errata
workarounds:
- Fix possible memory hotplug failure with KASLR
- Fix FFR value in SVE kselftest
- Fix backtraces reported in /proc/$pid/stack
- Disable broken CnP implementation on NVIDIA Carmel
- Typo fixes and ACPI documentation clarification
- Fix some W=1 warnings"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kernel: disable CNP on Carmel
arm64/process.c: fix Wmissing-prototypes build warnings
kselftest/arm64: sve: Do not use non-canonical FFR register value
arm64: mm: correct the inside linear map range during hotplug check
arm64: kdump: update ppos when reading elfcorehdr
arm64: cpuinfo: Fix a typo
Documentation: arm64/acpi : clarify arm64 support of IBFT
arm64: stacktrace: don't trace arch_stack_walk()
arm64: csum: cast to the proper type
When building out-of-tree, attempting to make target from $(OUTPUT) directory:
make[1]: *** No rule to make target '$(OUTPUT)/protection_keys.c', needed by '$(OUTPUT)/protection_keys_32'.
Link: https://lkml.kernel.org/r/20210315094700.522753-1-rong.a.chen@intel.com
Signed-off-by: Rong Chen <rong.a.chen@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sys/stat.h has been included at line 23, so remove the
duplicate one at line 27.
linux/string.h has been included at line 7, so remove the
duplicate one at line 9.
time.h has been included at line 14, so remove the
duplicate one at line 28.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kael_w@yeah.net
Link: http://lore.kernel.org/lkml/20210323050139.287461-1-wanjiabing@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'struct evlist' has been declared at 10th line.
'struct comm' has been declared at 15th line.
Remove the duplicates
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kael_w@yeah.net
Link: http://lore.kernel.org/lkml/20210325043947.846093-1-wanjiabing@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking fixes from David Miller:
"Various fixes, all over:
1) Fix overflow in ptp_qoriq_adjfine(), from Yangbo Lu.
2) Always store the rx queue mapping in veth, from Maciej
Fijalkowski.
3) Don't allow vmlinux btf in map_create, from Alexei Starovoitov.
4) Fix memory leak in octeontx2-af from Colin Ian King.
5) Use kvalloc in bpf x86 JIT for storing jit'd addresses, from
Yonghong Song.
6) Fix tx ptp stats in mlx5, from Aya Levin.
7) Check correct ip version in tun decap, fropm Roi Dayan.
8) Fix rate calculation in mlx5 E-Switch code, from arav Pandit.
9) Work item memork leak in mlx5, from Shay Drory.
10) Fix ip6ip6 tunnel crash with bpf, from Daniel Borkmann.
11) Lack of preemptrion awareness in macvlan, from Eric Dumazet.
12) Fix data race in pxa168_eth, from Pavel Andrianov.
13) Range validate stab in red_check_params(), from Eric Dumazet.
14) Inherit vlan filtering setting properly in b53 driver, from
Florian Fainelli.
15) Fix rtnl locking in igc driver, from Sasha Neftin.
16) Pause handling fixes in igc driver, from Muhammad Husaini
Zulkifli.
17) Missing rtnl locking in e1000_reset_task, from Vitaly Lifshits.
18) Use after free in qlcnic, from Lv Yunlong.
19) fix crash in fritzpci mISDN, from Tong Zhang.
20) Premature rx buffer reuse in igb, from Li RongQing.
21) Missing termination of ip[a driver message handler arrays, from
Alex Elder.
22) Fix race between "x25_close" and "x25_xmit"/"x25_rx" in hdlc_x25
driver, from Xie He.
23) Use after free in c_can_pci_remove(), from Tong Zhang.
24) Uninitialized variable use in nl80211, from Jarod Wilson.
25) Off by one size calc in bpf verifier, from Piotr Krysiuk.
26) Use delayed work instead of deferrable for flowtable GC, from
Yinjun Zhang.
27) Fix infinite loop in NPC unmap of octeontx2 driver, from
Hariprasad Kelam.
28) Fix being unable to change MTU of dwmac-sun8i devices due to lack
of fifo sizes, from Corentin Labbe.
29) DMA use after free in r8169 with WoL, fom Heiner Kallweit.
30) Mismatched prototypes in isdn-capi, from Arnd Bergmann.
31) Fix psample UAPI breakage, from Ido Schimmel"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (171 commits)
psample: Fix user API breakage
math: Export mul_u64_u64_div_u64
ch_ktls: fix enum-conversion warning
octeontx2-af: Fix memory leak of object buf
ptp_qoriq: fix overflow in ptp_qoriq_adjfine() u64 calcalation
net: bridge: don't notify switchdev for local FDB addresses
net/sched: act_ct: clear post_ct if doing ct_clear
net: dsa: don't assign an error value to tag_ops
isdn: capi: fix mismatched prototypes
net/mlx5: SF, do not use ecpu bit for vhca state processing
net/mlx5e: Fix division by 0 in mlx5e_select_queue
net/mlx5e: Fix error path for ethtool set-priv-flag
net/mlx5e: Offload tuple rewrite for non-CT flows
net/mlx5e: Allow to match on MPLS parameters only for MPLS over UDP
net/mlx5: Add back multicast stats for uplink representor
net: ipconfig: ic_dev can be NULL in ic_close_devs
MAINTAINERS: Combine "QLOGIC QLGE 10Gb ETHERNET DRIVER" sections into one
docs: networking: Fix a typo
r8169: fix DMA being used after buffer free if WoL is enabled
net: ipa: fix init header command validation
...
Test that unsupported resilient nexthop group configurations are
rejected and that offload / trap indication is correctly set on nexthop
buckets in a resilient group.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The number of nexthop buckets in a resilient nexthop group never
changes, so when the gateway address of a nexthop cannot be resolved,
the nexthop buckets are programmed to trap packets to the CPU in order
to trigger resolution. For example:
# ip nexthop add id 1 via 198.51.100.1 dev swp3
# ip nexthop add id 10 group 1 type resilient buckets 32
# ip nexthop bucket get id 10 index 0
id 10 index 0 idle_time 1.44 nhid 1 trap
Where 198.51.100.1 is a made-up IP.
Test that in this case packets are indeed trapped to the CPU via the
unresolved neigh trap.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds two new tests to cover bridge and vlan support:
- Add a bridge device to the Router1 (nsr1) container and attach the
veth0 device to the bridge. Set the IP address to the bridge device
to exercise the bridge forwarding path.
- Add vlan encapsulation between to the bridge device in the Router1 and
one of the sender containers (ns1).
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add some tests that verify that BTI functions correctly for static binaries
built with and without BTI support, verifying that SIGILL is generated when
expected and is not generated in other situations.
Since BTI support is still being rolled out in distributions these tests
are built entirely free standing, no libc support is used at all so none
of the standard helper functions for kselftest can be used and we open
code everything. This also means we aren't testing the kernel support for
the dynamic linker, though the test program can be readily adapted for
that once it becomes something that we can reliably build and run.
These tests were originally written by Dave Martin, I've adapted them for
kselftest, mainly around the build system and the output format.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20210309193731.57247-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The MTE selftests create temporary files in /dev/shm, for later mmap-ing
them. When there is no tmpfs mounted on /dev/shm, or /dev/shm does not
exist in the first place (on minimal filesystems), the error message is
not giving good hints:
# FAIL: Unable to open temporary file
# FAIL: memory allocation
not ok 17 Check initial tags with private mapping, ...
Add a perror() call, that gives both the filename and the actual error
reason, so that users get a chance of correcting that.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-12-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
if (!prctl(...) == 0) is not only cumbersome to read, it also upsets
clang and triggers a warning:
------------
mte_common_util.c:287:6: warning: logical not is only applied to the
left hand side of this comparison [-Wlogical-not-parentheses]
....
Fix that by just comparing against "not 0" instead.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-11-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When clang finds a header file on the command line, it wants to
precompile that, which would end up in a separate output file.
Specifying -o on that same command line collides with that effort, so
the compiler complains:
clang: error: cannot specify -o when generating multiple output files
Since we are not really after a precompiled header, just drop the header
file from the command line, by removing it from the list of source
files in the Makefile.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-10-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
At the moment we check the compiler's ability to compile MTE enabled
code, but guard all the Makefile rules by it. As a consequence a broken
or not capable compiler just doesn't do anything, and make happily
returns without any error message, but with no programs created.
Since the MTE feature is only supported by recent aarch64 compilers (not
all stable distro compilers support it), having an explicit message
seems like a good idea. To not break building multiple targets, we let
make proceed without errors.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-9-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
At the moment we either need to provide CC explicitly, or use a native
machine to get the ARM64 MTE selftest compiled.
It seems useful to use the same (cross-)compiler as we use for the
kernel, so copy the recipe we use in the pauth selftest.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-8-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
To check whether the CPU and kernel support the MTE features we want
to test, we use an (emulated) CPU ID register read. However we only
check against a very particular feature version (0b0010), even though
the ARM ARM promises ID register features to be backwards compatible.
While this could be fixed by using ">=" instead of "==", we should
actually use the explicit HWCAP2_MTE hardware capability, exposed by the
kernel via the ELF auxiliary vectors.
That moves this responsibility to the kernel, and fixes running the
tests on machines with FEAT_MTE3 capability.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-7-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Out of the box Ubuntu's 20.04 compiler warns about missing return value
checks for write() (sys)calls.
Make GCC happy by checking whether we actually managed to write out our
buffer.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-6-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Out of the box Ubuntu's 20.04 compiler warns about missing return value
checks for write() (sys)calls.
Make GCC happy by checking whether we actually managed to write "val".
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-5-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
I got several memory leak reports from Asan with a simple command. It
was because VDSO is not released due to the refcount. Like in
__dsos_addnew_id(), it should put the refcount after adding to the list.
$ perf record true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
=================================================================
==692599==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 439 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce4aa8ee in dso__new_id util/dso.c:1256
#2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132
#3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347
#4 0x559bce50826c in map__new util/map.c:175
#5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#6 0x559bce512f6b in machines__deliver_event util/session.c:1481
#7 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#8 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#10 0x559bce519bea in __perf_session__process_events util/session.c:2268
#11 0x559bce519bea in perf_session__process_events util/session.c:2297
#12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce520907 in nsinfo__copy util/namespaces.c:169
#2 0x559bce50821b in map__new util/map.c:168
#3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#4 0x559bce512f6b in machines__deliver_event util/session.c:1481
#5 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#6 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#8 0x559bce519bea in __perf_session__process_events util/session.c:2268
#9 0x559bce519bea in perf_session__process_events util/session.c:2297
#10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For some time now the 'perf test 42: BPF filter' returns an error on bpf
relocation subtest, at least on x86 and s390. This is caused by
d859900c4c ("bpf, libbpf: support global data/bss/rodata sections")
which introduces support for global variables in eBPF programs.
Perf test 42.4 checks that the eBPF relocation fails when the eBPF program
contains a global variable. It returns OK when the eBPF program
could not be loaded and FAILED otherwise.
With above commit the test logic for the eBPF relocation is obsolete.
The loading of the eBPF now succeeds and the test always shows FAILED.
This patch removes the sub test completely.
Also a lot of eBPF program testing is done in the eBPF test suite,
it also contains tests for global variables.
Output before:
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
42.4: BPF relocation checker : Failed
#
Output after:
# ./perf test -F 42
42: BPF filter :
42.1: Basic BPF filtering : Ok
42.2: BPF pinning : Ok
42.3: BPF prologue generation : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210324083734.1953123-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We should return correctly and warn in both daemon_session__kill() and
daemon__kill() after we tried everything to kill sessions. The current
code will keep on looping and waiting.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210320221013.1619613-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we don't process SIGCHLD before another comes, we will see just one
SIGCHLD as a result. In this case current code will miss exit
notification for a session and wait forever.
Adding extra waitpid check for all sessions when SIGCHLD is received, to
make sure we don't miss any session exit.
Also fix close condition for signal_fd.
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210320221013.1619613-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The patch "perf stat: Align CSV output for summary mode" aligned CSV
output and added "summary" to the first column of summary lines.
Now we check if the "summary" string is added to the CSV output.
If we set '--no-csv-summary' option, the "summary" string would not be
added, also check with this case.
Committer testing:
$ perf test csv
84: perf stat csv summary test : Ok
$
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210319070156.20394-2-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf stat' subcommand supports the request for a summary of the
interval counter readings. But the summary lines break the CSV output
so it's hard for scripts to parse the result.
Before:
# perf stat -x, -I1000 --interval-count 1 --summary
1.001323097,8013.48,msec,cpu-clock,8013483384,100.00,8.013,CPUs utilized
1.001323097,270,,context-switches,8013513297,100.00,0.034,K/sec
1.001323097,13,,cpu-migrations,8013530032,100.00,0.002,K/sec
1.001323097,184,,page-faults,8013546992,100.00,0.023,K/sec
1.001323097,20574191,,cycles,8013551506,100.00,0.003,GHz
1.001323097,10562267,,instructions,8013564958,100.00,0.51,insn per cycle
1.001323097,2019244,,branches,8013575673,100.00,0.252,M/sec
1.001323097,106152,,branch-misses,8013585776,100.00,5.26,of all branches
8013.48,msec,cpu-clock,8013483384,100.00,7.984,CPUs utilized
270,,context-switches,8013513297,100.00,0.034,K/sec
13,,cpu-migrations,8013530032,100.00,0.002,K/sec
184,,page-faults,8013546992,100.00,0.023,K/sec
20574191,,cycles,8013551506,100.00,0.003,GHz
10562267,,instructions,8013564958,100.00,0.51,insn per cycle
2019244,,branches,8013575673,100.00,0.252,M/sec
106152,,branch-misses,8013585776,100.00,5.26,of all branches
The summary line loses the timestamp column, which breaks the CSV
output.
We add a column at the original 'timestamp' position and it just says
'summary' for the summary line.
After:
# perf stat -x, -I1000 --interval-count 1 --summary
1.001196053,8012.72,msec,cpu-clock,8012722903,100.00,8.013,CPUs utilized
1.001196053,218,,context-switches,8012753271,100.00,0.027,K/sec
1.001196053,9,,cpu-migrations,8012769767,100.00,0.001,K/sec
1.001196053,0,,page-faults,8012786257,100.00,0.000,K/sec
1.001196053,15004518,,cycles,8012790637,100.00,0.002,GHz
1.001196053,7954691,,instructions,8012804027,100.00,0.53,insn per cycle
1.001196053,1590259,,branches,8012814766,100.00,0.198,M/sec
1.001196053,82601,,branch-misses,8012824365,100.00,5.19,of all branches
summary,8012.72,msec,cpu-clock,8012722903,100.00,7.986,CPUs utilized
summary,218,,context-switches,8012753271,100.00,0.027,K/sec
summary,9,,cpu-migrations,8012769767,100.00,0.001,K/sec
summary,0,,page-faults,8012786257,100.00,0.000,K/sec
summary,15004518,,cycles,8012790637,100.00,0.002,GHz
summary,7954691,,instructions,8012804027,100.00,0.53,insn per cycle
summary,1590259,,branches,8012814766,100.00,0.198,M/sec
summary,82601,,branch-misses,8012824365,100.00,5.19,of all branches
Now it's easy for script to analyse the summary lines.
Of course, we also consider not to break possible existing scripts which
can continue to use the broken CSV format by using a new '--no-csv-summary.'
option.
# perf stat -x, -I1000 --interval-count 1 --summary --no-csv-summary
1.001213261,8012.67,msec,cpu-clock,8012672327,100.00,8.013,CPUs utilized
1.001213261,197,,context-switches,8012703742,100.00,24.586,/sec
1.001213261,9,,cpu-migrations,8012720902,100.00,1.123,/sec
1.001213261,644,,page-faults,8012738266,100.00,80.373,/sec
1.001213261,18350698,,cycles,8012744109,100.00,0.002,GHz
1.001213261,12745021,,instructions,8012759001,100.00,0.69,insn per cycle
1.001213261,2458033,,branches,8012770864,100.00,306.768,K/sec
1.001213261,102107,,branch-misses,8012781751,100.00,4.15,of all branches
8012.67,msec,cpu-clock,8012672327,100.00,7.985,CPUs utilized
197,,context-switches,8012703742,100.00,24.586,/sec
9,,cpu-migrations,8012720902,100.00,1.123,/sec
644,,page-faults,8012738266,100.00,80.373,/sec
18350698,,cycles,8012744109,100.00,0.002,GHz
12745021,,instructions,8012759001,100.00,0.69,insn per cycle
2458033,,branches,8012770864,100.00,306.768,K/sec
102107,,branch-misses,8012781751,100.00,4.15,of all branches
This option can be enabled in perf config by setting the variable
'stat.no-csv-summary'.
# perf config stat.no-csv-summary=true
# perf config -l
stat.no-csv-summary=true
# perf stat -x, -I1000 --interval-count 1 --summary
1.001330198,8013.28,msec,cpu-clock,8013279201,100.00,8.013,CPUs utilized
1.001330198,205,,context-switches,8013308394,100.00,25.583,/sec
1.001330198,10,,cpu-migrations,8013324681,100.00,1.248,/sec
1.001330198,0,,page-faults,8013340926,100.00,0.000,/sec
1.001330198,8027742,,cycles,8013344503,100.00,0.001,GHz
1.001330198,2871717,,instructions,8013356501,100.00,0.36,insn per cycle
1.001330198,553564,,branches,8013366204,100.00,69.081,K/sec
1.001330198,54021,,branch-misses,8013375952,100.00,9.76,of all branches
8013.28,msec,cpu-clock,8013279201,100.00,7.985,CPUs utilized
205,,context-switches,8013308394,100.00,25.583,/sec
10,,cpu-migrations,8013324681,100.00,1.248,/sec
0,,page-faults,8013340926,100.00,0.000,/sec
8027742,,cycles,8013344503,100.00,0.001,GHz
2871717,,instructions,8013356501,100.00,0.36,insn per cycle
553564,,branches,8013366204,100.00,69.081,K/sec
54021,,branch-misses,8013375952,100.00,9.76,of all branches
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jin Yao <yao.jin@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210319070156.20394-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use the library function getauxval() instead of a custom function to get
the base address of the vDSO.
[ bp: Massage commit message. ]
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lkml.kernel.org/r/20210314111621.68428-1-tianjia.zhang@linux.alibaba.com
The rfi_flush and entry_flush selftests work by using the PM_LD_MISS_L1
perf event to count L1D misses. The value of this event has changed
over time:
- Power7 uses 0x400f0
- Power8 and Power9 use both 0x400f0 and 0x3e054
- Power10 uses only 0x3e054
Rather than relying on raw values, configure perf to count L1D read
misses in the most explicit way available.
This fixes the selftests to work on systems without 0x400f0 as
PM_LD_MISS_L1, and should change no behaviour for systems that the tests
already worked on.
The only potential downside is that referring to a specific perf event
requires PMU support implemented in the kernel for that platform.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Acked-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210223070227.2916871-1-ruscur@russell.cc
Add a test to compare the output of perf-stat with and without option
--bpf-counters. If the difference is more than 10%, the test is considered
as failed.
Committer testing:
# perf test bpf-counters
86: perf stat --bpf-counters test : Ok
# perf test -v bpf-counters
86: perf stat --bpf-counters test :
--- start ---
test child forked, pid 2433339
test child finished with 0
---- end ----
perf stat --bpf-counters test: Ok
#
Signed-off-by: Song Liu <songliubraving@fb.com>
Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/EC00E37D-8587-4662-8E30-7AD5F874FA84@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Take measurements of 't0' and 'ref_time' after enable_counters(), so
that they only measure the time consumed when the counters are enabled.
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Andi Kleen <andi@firstfloor.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: kernel-team@fb.com
Link: http://lore.kernel.org/lkml/20210316211837.910506-3-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf tool uses performance monitoring counters (PMCs) to monitor
system performance. The PMCs are limited hardware resources. For
example, Intel CPUs have 3x fixed PMCs and 4x programmable PMCs per cpu.
Modern data center systems use these PMCs in many different ways: system
level monitoring, (maybe nested) container level monitoring, per process
monitoring, profiling (in sample mode), etc. In some cases, there are
more active perf_events than available hardware PMCs. To allow all
perf_events to have a chance to run, it is necessary to do expensive
time multiplexing of events.
On the other hand, many monitoring tools count the common metrics
(cycles, instructions). It is a waste to have multiple tools create
multiple perf_events of "cycles" and occupy multiple PMCs.
bperf tries to reduce such wastes by allowing multiple perf_events of
"cycles" or "instructions" (at different scopes) to share PMUs. Instead
of having each perf-stat session to read its own perf_events, bperf uses
BPF programs to read the perf_events and aggregate readings to BPF maps.
Then, the perf-stat session(s) reads the values from these BPF maps.
Please refer to the comment before the definition of bperf_ops for the
description of bperf architecture.
bperf is off by default. To enable it, pass --bpf-counters option to
perf-stat. bperf uses a BPF hashmap to share information about BPF
programs and maps used by bperf. This map is pinned to bpffs. The
default path is /sys/fs/bpf/perf_attr_map. The user could change the
path with option --bpf-attr-map.
Committer testing:
# dmesg|grep "Performance Events" -A5
[ 0.225277] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.225280] ... version: 0
[ 0.225280] ... bit width: 48
[ 0.225281] ... generic registers: 6
[ 0.225281] ... value mask: 0000ffffffffffff
[ 0.225281] ... max period: 00007fffffffffff
#
# for a in $(seq 6) ; do perf stat -a -e cycles,instructions sleep 100000 & done
[1] 2436231
[2] 2436232
[3] 2436233
[4] 2436234
[5] 2436235
[6] 2436236
# perf stat -a -e cycles,instructions sleep 0.1
Performance counter stats for 'system wide':
310,326,987 cycles (41.87%)
236,143,290 instructions # 0.76 insn per cycle (41.87%)
0.100800885 seconds time elapsed
#
We can see that the counters were enabled for this workload 41.87% of
the time.
Now with --bpf-counters:
# for a in $(seq 32) ; do perf stat --bpf-counters -a -e cycles,instructions sleep 100000 & done
[1] 2436514
[2] 2436515
[3] 2436516
[4] 2436517
[5] 2436518
[6] 2436519
[7] 2436520
[8] 2436521
[9] 2436522
[10] 2436523
[11] 2436524
[12] 2436525
[13] 2436526
[14] 2436527
[15] 2436528
[16] 2436529
[17] 2436530
[18] 2436531
[19] 2436532
[20] 2436533
[21] 2436534
[22] 2436535
[23] 2436536
[24] 2436537
[25] 2436538
[26] 2436539
[27] 2436540
[28] 2436541
[29] 2436542
[30] 2436543
[31] 2436544
[32] 2436545
#
# ls -la /sys/fs/bpf/perf_attr_map
-rw-------. 1 root root 0 Mar 23 14:53 /sys/fs/bpf/perf_attr_map
# bpftool map | grep bperf | wc -l
64
#
# bpftool map | tail
1265: percpu_array name accum_readings flags 0x0
key 4B value 24B max_entries 1 memlock 4096B
1266: hash name filter flags 0x0
key 4B value 4B max_entries 1 memlock 4096B
1267: array name bperf_fo.bss flags 0x400
key 4B value 8B max_entries 1 memlock 4096B
btf_id 996
pids perf(2436545)
1268: percpu_array name accum_readings flags 0x0
key 4B value 24B max_entries 1 memlock 4096B
1269: hash name filter flags 0x0
key 4B value 4B max_entries 1 memlock 4096B
1270: array name bperf_fo.bss flags 0x400
key 4B value 8B max_entries 1 memlock 4096B
btf_id 997
pids perf(2436541)
1285: array name pid_iter.rodata flags 0x480
key 4B value 4B max_entries 1 memlock 4096B
btf_id 1017 frozen
pids bpftool(2437504)
1286: array flags 0x0
key 4B value 32B max_entries 1 memlock 4096B
#
# bpftool map dump id 1268 | tail
value (CPU 21):
8f f3 bc ca 00 00 00 00 80 fd 2a d1 4d 00 00 00
80 fd 2a d1 4d 00 00 00
value (CPU 22):
7e d5 64 4d 00 00 00 00 a4 8a 2e ee 4d 00 00 00
a4 8a 2e ee 4d 00 00 00
value (CPU 23):
a7 78 3e 06 01 00 00 00 b2 34 94 f6 4d 00 00 00
b2 34 94 f6 4d 00 00 00
Found 1 element
# bpftool map dump id 1268 | tail
value (CPU 21):
c6 8b d9 ca 00 00 00 00 20 c6 fc 83 4e 00 00 00
20 c6 fc 83 4e 00 00 00
value (CPU 22):
9c b4 d2 4d 00 00 00 00 3e 0c df 89 4e 00 00 00
3e 0c df 89 4e 00 00 00
value (CPU 23):
18 43 66 06 01 00 00 00 5b 69 ed 83 4e 00 00 00
5b 69 ed 83 4e 00 00 00
Found 1 element
# bpftool map dump id 1268 | tail
value (CPU 21):
f2 6e db ca 00 00 00 00 92 67 4c ba 4e 00 00 00
92 67 4c ba 4e 00 00 00
value (CPU 22):
dc 8e e1 4d 00 00 00 00 d9 32 7a c5 4e 00 00 00
d9 32 7a c5 4e 00 00 00
value (CPU 23):
bd 2b 73 06 01 00 00 00 7c 73 87 bf 4e 00 00 00
7c 73 87 bf 4e 00 00 00
Found 1 element
#
# perf stat --bpf-counters -a -e cycles,instructions sleep 0.1
Performance counter stats for 'system wide':
119,410,122 cycles
152,105,479 instructions # 1.27 insn per cycle
0.101395093 seconds time elapsed
#
See? We had the counters enabled all the time.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: kernel-team@fb.com
Link: http://lore.kernel.org/lkml/20210316211837.910506-2-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This KUnit update for Linux 5.12-rc5 consists of two fixes to kunit
tool from David Gow.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmBaFeoACgkQCwJExA0N
Qxz0Gg//Y3mX/SmBWYCB32Vm3nXOIqEPxDuTxn4V6l1XoSOjViDlqPjVMIeQ1/Cv
R8Hx0rXjzU9e9tuQaHSCnp89vqjnhIB3ROPWABsL2784EDsCpIqlT2ivey9wwBva
VImaTDFn4xlJjJG1L/vmlBzagczk02qSsvadbwC/+vLQSfSZJTZWD9c6TpmfF82T
P+FbWs8+WgpilsPOCYqXRvH8HDSWR/oXFOFxJTg64N3c5Vj2JIgnBeaCs+yahvEA
KnAt8988uhHH15ROsa93g6dIvQ4C7NT74IKZW8VLvkkUxAk86clQYRcZZdCBbZhc
yL3X1RhP/8a452df2LO0xraZTaxc2XI8H1F2ZhsJmmeBL2r2dyEe/4mWQD944e0h
ZGQqIi4+WiMV/+WyTwp05KxvPBaiG0GFFLznNEPQQLuP9Iwh8QBXnBpg+pw58pQ1
rk0fi8H0IaDjQjbAKiILnxRuINMAhoMOaYuYpMy+mD60AwyPOCAv1dHRInS8SG9D
UZxTDFyOQDJqSmLueqULbaWQ/21Jg8Jui4Mowf6DpXSXdPpJt4wHffBnWVW1OHqC
pYTCFAZ+S6bSoEeTvnyHXKO9MtsS0kxS1O5V5LS+Sc0sUcf3sxr83gU9E7Jvnmum
Os4HyFr5H4AAS4Yif2vgmB7Y2kIIgWViIcKzcGfXha8im8vcooM=
=uSNy
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-fixes-5.12-rc5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Two fixes to the kunit tool from David Gow"
* tag 'linux-kselftest-kunit-fixes-5.12-rc5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Disable PAGE_POISONING under --alltests
kunit: tool: Fix a python tuple typing error
Out of the box Ubuntu's 20.04 compiler warns about missing return value
checks for fscanf() calls.
Make GCC happy by checking whether we actually parsed one integer.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-4-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The GCC manual suggests to use -pthread, when linking with the PThread
library, also to add this switch to both the compilation and linking
stages.
Do as the manual says, to fix compilation with Ubuntu's 20.04 toolchain,
which was getting -lpthread too early on the command line:
------------
/usr/bin/ld: /tmp/cc5zbo2A.o: in function `execute_test':
tools/testing/selftests/arm64/mte/check_gcr_el1_cswitch.c:86:
undefined reference to `pthread_create'
/usr/bin/ld: tools/testing/selftests/arm64/mte/check_gcr_el1_cswitch.c:90:
undefined reference to `pthread_join'
------------
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-3-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The mte selftest Makefile contains a check for GCC, to add the memtag
-march flag to the compiler options. This check fails if the compiler
is not explicitly specified, so reverts to the standard "cc", in which
case --version doesn't mention the "gcc" string we match against:
$ cc --version | head -n 1
cc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0
This will not add the -march switch to the command line, so compilation
fails:
mte_helper.S: Assembler messages:
mte_helper.S:25: Error: selected processor does not support `irg x0,x0,xzr'
mte_helper.S:38: Error: selected processor does not support `gmi x1,x0,xzr'
...
Actually clang accepts the same -march option as well, so we can just
drop this check and add this unconditionally to the command line, to avoid
any future issues with this check altogether (gcc actually prints
basename(argv[0]) when called with --version).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Mark Brown <broone@kernel.org>
Link: https://lore.kernel.org/r/20210319165334.29213-2-andre.przywara@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some versions of grep are happy to interpret a nonsensically placed "-"
within a "[]" pattern as a dash, while others give an error message.
This commit therefore places the "-" at the end of the expression where
it was supposed to be in the first place.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, kvm-again.sh updates the duration in the "seconds=" comment
in the qemu-cmd file, but kvm-transform.sh updates the duration in the
actual qemu command arguments. This is an accident waiting to happen.
This commit therefore consolidates these updates into kvm-transform.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The kvm-again.sh script does not copy over the vmlinux files due to
their large size. This means that a gdb run must use the vmlinux file
from the original "res" directory. This commit therefore finds that
directory and prints it out so that the user can copy and pasted the
gdb command just as for the initial run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Because the TORTURE_TRUST_MAKE environment variable is not recorded,
kvm-again.sh runs can result in the parse-build.sh script emitting
false-positive "BUG: TREE03 no build" messages. These messages are
intended to complain about any lack of compiler invocations when the
--trust-make flag is not given to kvm.sh. However, when this flag is
given to kvm.sh (and thus when TORTURE_TRUST_MAKE=y), lack of compiler
invocations is expected behavior when rebuilding from identical source
code.
This commit therefore makes kvm-test-1-run.sh record the value of the
TORTURE_TRUST_MAKE environment variable as an additional comment in the
qemu-cmd file, and also makes kvm-again.sh reconstitute that variable
from that comment.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When rerunning an old run using kvm-again.sh, the jitter commands
will re-use the original "res" directory. This works, but is clearly
an accident waiting to happen. And this accident will happen with
remote runs, where the original directory lives on some other system.
This commit therefore updates the qemu-cmd commands to use the new res
directory created for this specific run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a --duration argument to kvm-again.sh to allow the user
to override the --duration specified for the original kvm.sh run.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds a kvm-again.sh script that, given the results directory
of a torture-test run, re-runs that test. This means that the kernels
need not be rebuilt, but it also is a step towards running torture tests
on remote systems.
This commit also adds a kvm-test-1-run-batch.sh script that runs one
batch out of the torture test. The idea is to copy a results directory
tree to remote systems, then use kvm-test-1-run-batch.sh to run batches
on these systems.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit creates a "batches" file in the res/$ds directory, where $ds
is the datestamp. This file contains the batches and the number of CPUs,
for example:
1 TREE03 16
1 SRCU-P 8
2 TREE07 16
2 TREE01 8
3 TREE02 8
3 TREE04 8
3 TREE05 8
4 SRCU-N 4
4 TRACE01 4
4 TRACE02 4
4 RUDE01 2
4 RUDE01.2 2
4 TASKS01 2
4 TASKS03 2
4 SRCU-t 1
4 SRCU-u 1
4 TASKS02 1
4 TINY01 1
5 TINY02 1
5 TREE09 1
The first column is the batch number, the second the scenario number
(possibly suffixed by a repetition number, as in "RUDE01.2"), and the
third is the number of CPUs required by that scenario. The last line
shows the number of CPUs expected by this batch file, which allows
the run to be re-batched if a different number of CPUs is available.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Although it might be unlikely that someone would name a scenario
"TORTURE_SUITE", they are within their rights to do so. This script
therefore renames the "TORTURE_SUITE" file in the top-level date-stamped
directory within "res" to "torture_suite" to avoid this name collision.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit enforces the defacto restriction on scenario names, which is
that they contain neither "/", ".", nor lowercase alphabetic characters.
This restriction avoids collisions between scenario names and the torture
scripting's files and directories.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The convention that scenario names are all uppercase has two exceptions,
SRCU-t and SRCU-u. This commit therefore renames them to SRCU-T and
SRCU-U, respectively, to bring them in line with this convention. This in
turn permits tighter argument checking in the torture-test scripting.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The cpus2use.sh script complains if the mpstat command is not available,
and instead uses all available CPUs. Unfortunately, this complaint
goes to stdout, where it confuses invokers who expect a single number.
This commit removes this error message in order to avoid this confusion.
The tendency of late has been to give rcutorture a full system, so this
should not cause issues.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit records the process IDs of the kvm-test-1-run.sh and
kvm-test-1-run-qemu.sh scripts to ease monitoring of remotely running
instances of these scripts.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Distributed runs of rcutorture will need to start and stop jittering on
the remote hosts, which means that the commands must be communicated to
those hosts. The commit therefore causes kvm.sh to place these commands
in new TORTURE_JITTER_START and TORTURE_JITTER_STOP environment variables
to communicate them to the scripts that will set this up. In addition,
this commit causes kvm-test-1-run.sh to append these commands to each
generated qemu-cmd file, which allows any remotely executing script to
extract the needed commands from this file.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, kvm-test-1-run.sh both builds and runs an rcutorture kernel,
which is inconvenient when it is necessary to re-run an old run or to
carry out a run on a remote system. This commit therefore extracts the
portion of kvm-test-1-run.sh that invoke qemu to actually run rcutorture
and places it in kvm-test-1-run-qemu.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When re-running old rcutorture builds, if the original run involved
gdb, the re-run also needs to do so. This commit therefore records the
TORTURE_KCONFIG_GDB_ARG environment variable into the qemu-cmd file so
that the re-run can access it.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit creates jitterstart.sh and jitterstop.sh scripts that handle
the starting and stopping of the jitter.sh scripts. These must be sourced
using the bash "." command to allow the generated script to wait on the
backgrounded jitter.sh scripts.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The "First Fault Register" (FFR) is an SVE register that mimics a
predicate register, but clears bits when a load or store fails to handle
an element of a vector. The supposed usage scenario is to initialise
this register (using SETFFR), then *read* it later on to learn about
elements that failed to load or store. Explicit writes to this register
using the WRFFR instruction are only supposed to *restore* values
previously read from the register (for context-switching only).
As the manual describes, this register holds only certain values, it:
"... contains a monotonic predicate value, in which starting from bit 0
there are zero or more 1 bits, followed only by 0 bits in any remaining
bit positions."
Any other value is UNPREDICTABLE and is not supposed to be "restored"
into the register.
The SVE test currently tries to write a signature pattern into the
register, which is *not* a canonical FFR value. Apparently the existing
setups treat UNPREDICTABLE as "read-as-written", but a new
implementation actually only stores canonical values. As a consequence,
the sve-test fails immediately when comparing the FFR value:
-----------
# ./sve-test
Vector length: 128 bits
PID: 207
Mismatch: PID=207, iteration=0, reg=48
Expected [cf00]
Got [0f00]
Aborted
-----------
Fix this by only populating the FFR with proper canonical values.
Effectively the requirement described above limits us to 17 unique
values over 16 bits worth of FFR, so we condense our signature down to 4
bits (2 bits from the PID, 2 bits from the generation) and generate the
canonical pattern from it. Any bits describing elements above the
minimum 128 bit are set to 0.
This aligns the FFR usage to the architecture and fixes the test on
microarchitectures implementing FFR in a more restricted way.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviwed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210319120128.29452-1-andre.przywara@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2021-03-20
The following pull-request contains BPF updates for your *net* tree.
We've added 5 non-merge commits during the last 3 day(s) which contain
a total of 8 files changed, 155 insertions(+), 12 deletions(-).
The main changes are:
1) Use correct nops in fexit trampoline, from Stanislav.
2) Fix BTF dump, from Jean-Philippe.
3) Fix umd memory leak, from Zqiang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bpftool used to issue forward declarations for a struct used as part of
a pointer to array, which is invalid. Add a test to check that the
struct is fully defined in this case:
@@ -134,9 +134,9 @@
};
};
-struct struct_in_array {};
+struct struct_in_array;
-struct struct_in_array_typed {};
+struct struct_in_array_typed;
typedef struct struct_in_array_typed struct_in_array_t[2];
@@ -189,3 +189,7 @@
struct struct_with_embedded_stuff _14;
};
+struct struct_in_array {};
+
+struct struct_in_array_typed {};
+
...
#13/1 btf_dump: syntax:FAIL
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319112554.794552-3-jean-philippe@linaro.org
The vmlinux.h generated from BTF is invalid when building
drivers/phy/ti/phy-gmii-sel.c with clang:
vmlinux.h:61702:27: error: array type has incomplete element type ‘struct reg_field’
61702 | const struct reg_field (*regfields)[3];
| ^~~~~~~~~
bpftool generates a forward declaration for this struct regfield, which
compilers aren't happy about. Here's a simplified reproducer:
struct inner {
int val;
};
struct outer {
struct inner (*ptr_to_array)[2];
} A;
After build with clang -> bpftool btf dump c -> clang/gcc:
./def-clang.h:11:23: error: array has incomplete element type 'struct inner'
struct inner (*ptr_to_array)[2];
Member ptr_to_array of struct outer is a pointer to an array of struct
inner. In the DWARF generated by clang, struct outer appears before
struct inner, so when converting BTF of struct outer into C, bpftool
issues a forward declaration to struct inner. With GCC the DWARF info is
reversed so struct inner gets fully defined.
That forward declaration is not sufficient when compilers handle an
array of the struct, even when it's only used through a pointer. Note
that we can trigger the same issue with an intermediate typedef:
struct inner {
int val;
};
typedef struct inner inner2_t[2];
struct outer {
inner2_t *ptr_to_array;
} A;
Becomes:
struct inner;
typedef struct inner inner2_t[2];
And causes:
./def-clang.h:10:30: error: array has incomplete element type 'struct inner'
typedef struct inner inner2_t[2];
To fix this, clear through_ptr whenever we encounter an intermediate
array, to make the inner struct part of a strong link and force full
declaration.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319112554.794552-2-jean-philippe@linaro.org
Similar to
https://lore.kernel.org/bpf/20210313210920.1959628-2-andrii@kernel.org/
When DECLARE_LIBBPF_OPTS is used with inline field initialization, e.g:
DECLARE_LIBBPF_OPTS(btf_dump_emit_type_decl_opts, opts,
.field_name = var_ident,
.indent_level = 2,
.strip_mods = strip_mods,
);
and compiled in debug mode, the compiler generates code which
leaves the padding uninitialized and triggers errors within libbpf APIs
which require strict zero initialization of OPTS structs.
Adding anonymous padding field fixes the issue.
Fixes: 9f81654eeb ("libbpf: Expose BTF-to-C type declaration emitting API")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210319192117.2310658-1-kpsingh@kernel.org
The ECN bit defines ECT(1) = 1, ECT(0) = 2. So inner 0x02 + outer 0x01
should be inner ECT(0) + outer ECT(1). Based on the description of
__INET_ECN_decapsulate, the final decapsulate value should be
ECT(1). So fix the test expect value to 0x01.
Before the fix:
TEST: VXLAN: ECN decap: 01/02->0x02 [FAIL]
Expected to capture 10 packets, got 0.
After the fix:
TEST: VXLAN: ECN decap: 01/02->0x01 [ OK ]
Fixes: a0b61f3d8e ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SGX device file (/dev/sgx_enclave) is unusual in that it requires
execute permissions. It has to be both "chmod +x" *and* be on a
filesystem without 'noexec'.
In the future, udev and systemd should get updates to set up systems
automatically. But, for now, nobody's systems do this automatically,
and everybody gets error messages like this when running ./test_sgx:
0x0000000000000000 0x0000000000002000 0x03
0x0000000000002000 0x0000000000001000 0x05
0x0000000000003000 0x0000000000003000 0x03
mmap() failed, errno=1.
That isn't very user friendly, even for forgetful kernel developers.
Further, the test case is rather haphazard about its use of fprintf()
versus perror().
Improve the error messages. Use perror() where possible. Lastly,
do some sanity checks on opening and mmap()ing the device file so
that we can get a decent error message out to the user.
Now, if your user doesn't have permission, you'll get the following:
$ ls -l /dev/sgx_enclave
crw------- 1 root root 10, 126 Mar 18 11:29 /dev/sgx_enclave
$ ./test_sgx
Unable to open /dev/sgx_enclave: Permission denied
If you then 'chown dave:dave /dev/sgx_enclave' (or whatever), but
you leave execute permissions off, you'll get:
$ ls -l /dev/sgx_enclave
crw------- 1 dave dave 10, 126 Mar 18 11:29 /dev/sgx_enclave
$ ./test_sgx
no execute permissions on device file
If you fix that with "chmod ug+x /dev/sgx" but you leave /dev as
noexec, you'll get this:
$ mount | grep "/dev .*noexec"
udev on /dev type devtmpfs (rw,nosuid,noexec,...)
$ ./test_sgx
ERROR: mmap for exec: Operation not permitted
mmap() succeeded for PROT_READ, but failed for PROT_EXEC
check that user has execute permissions on /dev/sgx_enclave and
that /dev does not have noexec set: 'mount | grep "/dev .*noexec"'
That can be fixed with:
mount -o remount,noexec /devESC
Hopefully, the combination of better error messages and the search
engines indexing this message will help people fix their systems
until we do this properly.
[ bp: Improve error messages more. ]
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20210318194301.11D9A984@viggo.jf.intel.com
Add Makefile infra to specify multi-file BPF object files (and derivative
skeletons). Add first selftest validating BPF static linker can merge together
successfully two independent BPF object files and resulting object and
skeleton are correct and usable.
Use the same F(F(F(X))) = F(F(X)) identity test on linked object files as for
the case of single BPF object files.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-13-andrii@kernel.org
Pass all individual BPF object files (generated from progs/*.c) through
`bpftool gen object` command to validate that BPF static linker doesn't
corrupt them.
As an additional sanity checks, validate that passing resulting object files
through linker again results in identical ELF files. Exact same ELF contents
can be guaranteed only after two passes, as after the first pass ELF sections
order changes, and thus .BTF.ext data sections order changes. That, in turn,
means that strings are added into the final BTF string sections in different
order, so .BTF strings data might not be exactly the same. But doing another
round of linking afterwards should result in the identical ELF file, which is
checked with additional `diff` command.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-12-andrii@kernel.org
Trigger vmlinux.h and BPF skeletons re-generation if detected that bpftool was
re-compiled. Otherwise full `make clean` is required to get updated skeletons,
if bpftool is modified.
Fixes: acbd06206b ("selftests/bpf: Add vmlinux.h selftest exercising tracing of syscalls")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-11-andrii@kernel.org
Add `bpftool gen object <output-file> <input_file>...` command to statically
link multiple BPF ELF object files into a single output BPF ELF object file.
This patch also updates bash completions and man page. Man page gets a short
section on `gen object` command, but also updates the skeleton example to show
off workflow for BPF application with two .bpf.c files, compiled individually
with Clang, then resulting object files are linked together with `gen object`,
and then final object file is used to generate usable BPF skeleton. This
should help new users understand realistic workflow w.r.t. compiling
mutli-file BPF application.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-10-andrii@kernel.org
Add optional name OBJECT_NAME parameter to `gen skeleton` command to override
default object name, normally derived from input file name. This allows much
more flexibility during build time.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-9-andrii@kernel.org
Add .BTF and .BTF.ext static linking logic.
When multiple BPF object files are linked together, their respective .BTF and
.BTF.ext sections are merged together. BTF types are not just concatenated,
but also deduplicated. .BTF.ext data is grouped by type (func info, line info,
core_relos) and target section names, and then all the records are
concatenated together, preserving their relative order. All the BTF type ID
references and string offsets are updated as necessary, to take into account
possibly deduplicated strings and types.
BTF DATASEC types are handled specially. Their respective var_secinfos are
accumulated separately in special per-section data and then final DATASEC
types are emitted at the very end during bpf_linker__finalize() operation,
just before emitting final ELF output file.
BTF data can also provide "section annotations" for some extern variables.
Such concept is missing in ELF, but BTF will have DATASEC types for such
special extern datasections (e.g., .kconfig, .ksyms). Such sections are called
"ephemeral" internally. Internally linker will keep metadata for each such
section, collecting variables information, but those sections won't be emitted
into the final ELF file.
Also, given LLVM/Clang during compilation emits BTF DATASECS that are
incomplete, missing section size and variable offsets for static variables,
BPF static linker will initially fix up such DATASECs, using ELF symbols data.
The final DATASECs will preserve section sizes and all variable offsets. This
is handled correctly by libbpf already, so won't cause any new issues. On the
other hand, it's actually a nice property to have a complete BTF data without
runtime adjustments done during bpf_object__open() by libbpf. In that sense,
BPF static linker is also a BTF normalizer.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-8-andrii@kernel.org
Introduce BPF static linker APIs to libbpf. BPF static linker allows to
perform static linking of multiple BPF object files into a single combined
resulting object file, preserving all the BPF programs, maps, global
variables, etc.
Data sections (.bss, .data, .rodata, .maps, maps, etc) with the same name are
concatenated together. Similarly, code sections are also concatenated. All the
symbols and ELF relocations are also concatenated in their respective ELF
sections and are adjusted accordingly to the new object file layout.
Static variables and functions are handled correctly as well, adjusting BPF
instructions offsets to reflect new variable/function offset within the
combined ELF section. Such relocations are referencing STT_SECTION symbols and
that stays intact.
Data sections in different files can have different alignment requirements, so
that is taken care of as well, adjusting sizes and offsets as necessary to
satisfy both old and new alignment requirements.
DWARF data sections are stripped out, currently. As well as LLLVM_ADDRSIG
section, which is ignored by libbpf in bpf_object__open() anyways. So, in
a way, BPF static linker is an analogue to `llvm-strip -g`, which is a pretty
nice property, especially if resulting .o file is then used to generate BPF
skeleton.
Original string sections are ignored and instead we construct our own set of
unique strings using libbpf-internal `struct strset` API.
To reduce the size of the patch, all the .BTF and .BTF.ext processing was
moved into a separate patch.
The high-level API consists of just 4 functions:
- bpf_linker__new() creates an instance of BPF static linker. It accepts
output filename and (currently empty) options struct;
- bpf_linker__add_file() takes input filename and appends it to the already
processed ELF data; it can be called multiple times, one for each BPF
ELF object file that needs to be linked in;
- bpf_linker__finalize() needs to be called to dump final ELF contents into
the output file, specified when bpf_linker was created; after
bpf_linker__finalize() is called, no more bpf_linker__add_file() and
bpf_linker__finalize() calls are allowed, they will return error;
- regardless of whether bpf_linker__finalize() was called or not,
bpf_linker__free() will free up all the used resources.
Currently, BPF static linker doesn't resolve cross-object file references
(extern variables and/or functions). This will be added in the follow up patch
set.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-7-andrii@kernel.org
Add btf__add_type() API that performs shallow copy of a given BTF type from
the source BTF into the destination BTF. All the information and type IDs are
preserved, but all the strings encountered are added into the destination BTF
and corresponding offsets are rewritten. BTF type IDs are assumed to be
correct or such that will be (somehow) modified afterwards.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-6-andrii@kernel.org
Extract BTF logic for maintaining a set of strings data structure, used for
BTF strings section construction in writable mode, into separate re-usable
API. This data structure is going to be used by bpf_linker to maintains ELF
STRTAB section, which has the same layout as BTF strings section.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-5-andrii@kernel.org
Rename btf_add_mem() and btf_ensure_mem() helpers that abstract away details
of dynamically resizable memory to use libbpf_ prefix, as they are not
BTF-specific. No functional changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-4-andrii@kernel.org
Extract and generalize the logic to iterate BTF type ID and string offset
fields within BTF types and .BTF.ext data. Expose this internally in libbpf
for re-use by bpf_linker.
Additionally, complete strings deduplication handling for BTF.ext (e.g., CO-RE
access strings), which was previously missing. There previously was no
case of deduplicating .BTF.ext data, but bpf_linker is going to use it.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-3-andrii@kernel.org
btf_type_by_id() is internal-only convenience API returning non-const pointer
to struct btf_type. Expose it outside of btf.c for re-use.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210318194036.3521577-2-andrii@kernel.org
Test for the KVM_SET_BOOT_CPU_ID ioctl.
Check that it correctly allows to change the BSP vcpu.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210318151624.490861-2-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As in kvm_ioctl and _kvm_ioctl, add
the respective _vm_ioctl for vm_ioctl.
_vm_ioctl invokes an ioctl using the vm fd,
leaving the caller to test the result.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210318151624.490861-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Test the KVM_GET_MSR_FEATURE_INDEX_LIST
and KVM_GET_MSR_INDEX_LIST ioctls.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210318145629.486450-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a selftest for commit e21aa34178 ("bpf: Fix fexit trampoline.")
to make sure that attaching fexit prog to a sleeping kernel function
will trigger appropriate trampoline and program destruction.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210318004523.55908-1-alexei.starovoitov@gmail.com
Introduce a new selftest for Hyper-V clocksources (MSR-based reference TSC
and TSC page). As a starting point, test the following:
1) Reference TSC is 1Ghz clock.
2) Reference TSC and TSC page give the same reading.
3) TSC page gets updated upon KVM_SET_CLOCK call.
4) TSC page does not get updated when guest opted for reenlightenment.
5) Disabled TSC page doesn't get updated.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210318140949.1065740-1-vkuznets@redhat.com>
[Add a host-side test using TSC + KVM_GET_MSR too. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Input lines like
0x8000001E, 0, EAX, 31:0, Extended APIC ID
where the short name is missing lead to a segfault because the loop
takes the long name for the short name and tokens[5] becomes NULL which
explodes later in strcpy().
Check its value too before further processing.
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lkml.kernel.org/r/20210315125901.30315-1-bp@alien8.de
test_syscall_vdso_32 ended up with an executable stacks because the asm
was missing the annotation that says that it is modern and doesn't need
an executable stack. Add the annotation.
This was missed in commit aeaaf005da ("selftests/x86: Add missing
.note.GNU-stack sections").
Fixes: aeaaf005da ("selftests/x86: Add missing .note.GNU-stack sections")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/487ed5348a43c031b816fa7e9efedb75dc324299.1614877299.git.luto@kernel.org
Now that bpftool generates NULL definition as part of vmlinux.h, drop custom
NULL definition in skb_pkt_end.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20210317200510.1354627-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given that vmlinux.h is not compatible with headers like stddef.h, NULL poses
an annoying problem: it is defined as #define, so is not captured in BTF, so
is not emitted into vmlinux.h. This leads to users either sticking to explicit
0, or defining their own NULL (as progs/skb_pkt_end.c does).
But it's easy for bpf_helpers.h to provide (conditionally) NULL definition.
Similarly, KERNEL_VERSION is another commonly missed macro that came up
multiple times. So this patch adds both of them, along with offsetof(), that
also is typically defined in stddef.h, just like NULL.
This might cause compilation warning for existing BPF applications defining
their own NULL and/or KERNEL_VERSION already:
progs/skb_pkt_end.c:7:9: warning: 'NULL' macro redefined [-Wmacro-redefined]
#define NULL 0
^
/tmp/linux/tools/testing/selftests/bpf/tools/include/vmlinux.h:4:9: note: previous definition is here
#define NULL ((void *)0)
^
It is trivial to fix, though, so long-term benefits outweight temporary
inconveniences.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20210317200510.1354627-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2021-03-18
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 4 day(s) which contain
a total of 14 files changed, 336 insertions(+), 94 deletions(-).
The main changes are:
1) Fix fexit/fmod_ret trampoline for sleepable programs, and also fix a ftrace
splat in modify_ftrace_direct() on address change, from Alexei Starovoitov.
2) Fix two oob speculation possibilities that allows unprivileged to leak mem
via side-channel, from Piotr Krysiuk and Daniel Borkmann.
3) Fix libbpf's netlink handling wrt SOCK_CLOEXEC, from Kumar Kartikeya Dwivedi.
4) Fix libbpf's error handling on failure in getting section names, from Namhyung Kim.
5) Fix tunnel collect_md BPF selftest wrt Geneve option handling, from Hangbin Liu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Otherwise, there exists a small window between the opening and closing
of the socket fd where it may leak into processes launched by some other
thread.
Fixes: 949abbe884 ("libbpf: add function to setup XDP")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210317115857.6536-1-memxor@gmail.com
When it failed to get section names, it should call into
bpf_object__elf_finish() like others.
Fixes: 88a8212028 ("libbpf: Factor out common ELF operations and improve logging")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210317145414.884817-1-namhyung@kernel.org
Fix up test_verifier error messages for the case where the original error
message changed, or for the case where pointer alu errors differ between
privileged and unprivileged tests. Also, add alternative tests for keeping
coverage of the original verifier rejection error message (fp alu), and
newly reject map_ptr += rX where rX == 0 given we now forbid alu on these
types for unprivileged. All test_verifier cases pass after the change. The
test case fixups were kept separate to ease backporting of core changes.
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Co-developed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
q_in_vni_veto.sh is not needed anymore because VxLAN with an 802.1ad
bridge and VxLAN with an 802.1d bridge can coexist.
Remove the test.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rob Herring
Vitaly Chikunov
Arnaldo Carvalho de Melo
zuoqilin
Florent Revest
Greg Kroah-Hartman
Yang Jihong
Toke Høiland-Jørgensen
Pedro Tammela
Daniel Borkmann
Paolo Abeni
Ingo Molnar
Jakub Kicinski
Linus Torvalds
Yauheni Kaliuta
Andrii Nakryiko
Ciara Loftus
Vlad Buslov
Masanari Iida
Smita Koralahalli
John Garry
Kees Cook
Jordan Niethe
Fenghua Yu
Geliang Tang
Ian Rogers
Jin Yao
Srinivas Pandruvada
Antonio Terceiro
Colin Ian King
Eric Auger
Wan Jiabing
Mauro Carvalho Chehab
Sean Christopherson
Hengqi Chen
Adrian Hunter
Martin KaFai Lau
Yang Yingliang
John Fastabend
Matthieu Baerts
Daniel Latypov
Reinette Chatre
David S. Miller
Xiang Chen
Hao Fang
Peter Zijlstra
Cong Wang
Matthew Wilcox (Oracle)
Vitaly Kuznetsov
Carlos Llamas
Stanislav Fomichev
Borislav Petkov
Martin Liška
KP Singh
Stefan Raspl
Björn Töpel
Maciej Fijalkowski
Fabian Hemmer
Andrii Nakryiko
Ido Schimmel
Randy Dunlap
Baowen Zheng
Ilya Leoshkevich
Hongren Zheng (Zenithal)
Leo Yan
Athira Rajeev
Rafael David Tinoco
Pedro Tammela
Linus Walleij
Rong Chen
Paul E. McKenney
Pablo Neira Ayuso
Mark Brown
Andre Przywara
Namhyung Kim
Thomas Richter
Jiri Olsa
Tianjia Zhang
Russell Currey
Song Liu
Jiapeng Chong
Ricardo Ribalda
Jean-Philippe Brucker
Hangbin Liu
Dave Hansen
Bhaskar Chowdhury
Emanuele Giuseppe Esposito
Xu Wang
Alexei Starovoitov
Andy Lutomirski
Kumar Kartikeya Dwivedi
Piotr Krysiuk
Amit Cohen