We use addr_in_gen_pool() in a driver module. So export it.
Link: http://lkml.kernel.org/r/20181224070622.22197-2-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Skidanov <alexey.skidanov@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In some cases the previous algorithm would not return the closest
approximation. This would happen when a semi-convergent was the
closest, as the previous algorithm would only consider convergents.
As an example, consider an initial value of 5/4, and trying to find the
closest approximation with a maximum of 4 for numerator and denominator.
The previous algorithm would return 1/1 as the closest approximation,
while this version will return the correct answer of 4/3.
To do this, the main loop performs effectively the same operations as it
did before. It must now keep track of the last three approximations,
n2/d2 .. n0/d0, while before it only needed the last two.
If an exact answer is not found, the algorithm will now calculate the
best semi-convergent term, t, which is a single expression with two
divisions:
min((max_numerator - n0) / n1, (max_denominator - d0) / d1)
This will be used if it is better than previous convergent. The test
for this is generally a simple comparison, 2*t > a. But in an edge
case, where the convergent's final term is even and the best allowable
semi-convergent has a final term of exactly half the convergent's final
term, the more complex comparison (d0*dp > d1*d) is used.
I also wrote some comments explaining the code. While one still needs
to look up the math elsewhere, they should help a lot to follow how the
code relates to that math.
This routine is used in two places in the video4linux code, but in those
cases it is only used to reduce a fraction to lowest terms, which the
existing code will do correctly. This could be done more efficiently
with a different library routine but it would still be the Euclidean
alogrithm at its heart. So no change.
The remain users are places where a fractional PLL divider is
programmed. What would happen is something asked for a clock of X MHz
but instead gets Y MHz, where Y is close to X but not exactly due to the
hardware limitations. After this change they might, in some cases, get
Y' MHz, where Y' is a little closer to X then Y was.
Users like this are: Three UARTs, in 8250_mid, 8250_lpss, and imx. One
GPU in vp4_hdmi. And three clock drivers, clk-cdce706, clk-si5351, and
clk-fractional-divider. The last is a generic clock driver and so would
have more users referenced via device tree entries.
I think there's a bug in that one, it's limiting an N bit field that is
offset-by-1 to the range 0 .. (1<<N)-2, when it should be (1<<N)-1 as
the upper limit.
I have an IMX system, one of the UARTs using this, so I can provide a
real example. If I request a custom baud rate of 1499978, the driver
will program the PLL to produce a baud rate of 1500000. After this
change, the fractional divider in the UART is programmed to a ratio of
65535/65536, which produces a baud rate of 1499977.0625. Closer to the
requested value.
Link: http://lkml.kernel.org/r/20190330205855.19396-1-tpiepho@gmail.com
Signed-off-by: Trent Piepho <tpiepho@gmail.com>
Cc: Oskar Schirmer <oskar@scara.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmem_cache_alloc_bulk/kmem_cache_free_bulk are used to make multiple
allocations of the same size to avoid the overhead of multiple
kmalloc/kfree calls. Extend the kmem_cache tests to make some calls to
these APIs.
Link: http://lkml.kernel.org/r/20191107191447.23058-1-labbott@redhat.com
Signed-off-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Sandeep Patil <sspatil@android.com>
Cc: Jann Horn <jannh@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After move parent assignment out, we can check the color directly.
Link: http://lkml.kernel.org/r/20191028021442.5450-2-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both in Case 2 and 3, we exchange n and s. This mean no matter whether
child2 is NULL or not, successor's parent should be assigned to node's.
This patch takes this step out to make it explicit and reduce the
ambiguity.
Besides, this step reduces some symbol size like rb_erase().
KERN_CONFIG upstream patched
OPT_FOR_PERF 877 870
OPT_FOR_SIZE 635 621
Link: http://lkml.kernel.org/r/20191028021442.5450-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace verbose implementation in set_multiple callback with
for_each_set_clump8 macro to simplify code and improve clarity. An
improvement in this case is that banks that are not masked will now be
skipped.
Link: http://lkml.kernel.org/r/5b24887e97f3093e4832d7c50a1093f537e91ab4.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The introduction of the for_each_set_clump8 macro warrants test cases to
verify the implementation. This patch adds test case checks for whether
an out-of-bounds clump index is returned, a zero clump is returned, or
the returned clump value differs from the expected clump value.
Link: http://lkml.kernel.org/r/febc0fb8151e3e3fdd61c34da9193d1c4d7e6c12.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pach series "Introduce the for_each_set_clump8 macro", v18.
While adding GPIO get_multiple/set_multiple callback support for various
drivers, I noticed a pattern of looping manifesting that would be useful
standardized as a macro.
This patchset introduces the for_each_set_clump8 macro and utilizes it
in several GPIO drivers. The for_each_set_clump macro8 facilitates a
for-loop syntax that iterates over a memory region entire groups of set
bits at a time.
For example, suppose you would like to iterate over a 32-bit integer 8
bits at a time, skipping over 8-bit groups with no set bit, where
XXXXXXXX represents the current 8-bit group:
Example: 10111110 00000000 11111111 00110011
First loop: 10111110 00000000 11111111 XXXXXXXX
Second loop: 10111110 00000000 XXXXXXXX 00110011
Third loop: XXXXXXXX 00000000 11111111 00110011
Each iteration of the loop returns the next 8-bit group that has at
least one set bit.
The for_each_set_clump8 macro has four parameters:
* start: set to the bit offset of the current clump
* clump: set to the current clump value
* bits: bitmap to search within
* size: bitmap size in number of bits
In this version of the patchset, the for_each_set_clump macro has been
reimplemented and simplified based on the suggestions provided by Rasmus
Villemoes and Andy Shevchenko in the version 4 submission.
In particular, the function of the for_each_set_clump macro has been
restricted to handle only 8-bit clumps; the drivers that use the
for_each_set_clump macro only handle 8-bit ports so a generic
for_each_set_clump implementation is not necessary. Thus, a solution
for large clumps (i.e. those larger than the width of a bitmap word)
can be postponed until a driver appears that actually requires such a
generic for_each_set_clump implementation.
For what it's worth, a semi-generic for_each_set_clump (i.e. for clumps
smaller than the width of a bitmap word) can be implemented by simply
replacing the hardcoded '8' and '0xFF' instances with respective
variables. I have not yet had a need for such an implementation, and
since it falls short of a true generic for_each_set_clump function, I
have decided to forgo such an implementation for now.
In addition, the bitmap_get_value8 and bitmap_set_value8 functions are
introduced to get and set 8-bit values respectively. Their use is based
on the behavior suggested in the patchset version 4 review.
This patch (of 14):
This macro iterates for each 8-bit group of bits (clump) with set bits,
within a bitmap memory region. For each iteration, "start" is set to
the bit offset of the found clump, while the respective clump value is
stored to the location pointed by "clump". Additionally, the
bitmap_get_value8 and bitmap_set_value8 functions are introduced to
respectively get and set an 8-bit value in a bitmap memory region.
[gustavo@embeddedor.com: fix potential sign-extension overflow]
Link: http://lkml.kernel.org/r/20191015184657.GA26541@embeddedor
[akpm@linux-foundation.org: s/ULL/UL/, per Joe]
[vilhelm.gray@gmail.com: add for_each_set_clump8 documentation]
Link: http://lkml.kernel.org/r/20191016161825.301082-1-vilhelm.gray@gmail.com
Link: http://lkml.kernel.org/r/893c3b4f03266c9496137cc98ac2b1bd27f92c73.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Suggested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Initialization is not guaranteed to zero padding bytes so use an
explicit memset instead to avoid leaking any kernel content in any
possible padding bytes.
Link: http://lkml.kernel.org/r/dfa331c00881d61c8ee51577a082d8bebd61805c.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When building with clang + -Wtautological-pointer-compare, these
instances pop up:
kernel/profile.c:339:6: warning: comparison of array 'prof_cpu_mask' not equal to a null pointer is always true [-Wtautological-pointer-compare]
if (prof_cpu_mask != NULL)
^~~~~~~~~~~~~ ~~~~
kernel/profile.c:376:6: warning: comparison of array 'prof_cpu_mask' not equal to a null pointer is always true [-Wtautological-pointer-compare]
if (prof_cpu_mask != NULL)
^~~~~~~~~~~~~ ~~~~
kernel/profile.c:406:26: warning: comparison of array 'prof_cpu_mask' not equal to a null pointer is always true [-Wtautological-pointer-compare]
if (!user_mode(regs) && prof_cpu_mask != NULL &&
^~~~~~~~~~~~~ ~~~~
3 warnings generated.
This can be addressed with the cpumask_available helper, introduced in
commit f7e30f01a9 ("cpumask: Add helper cpumask_available()") to fix
warnings like this while keeping the code the same.
Link: https://github.com/ClangBuiltLinux/linux/issues/747
Link: http://lkml.kernel.org/r/20191022191957.9554-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
blocking_notifier_chain_cond_register() does not consider system_booting
state, which is the only difference between this function and
blocking_notifier_cain_register(). This can be a bug and is a piece of
duplicate code.
Delete blocking_notifier_chain_cond_register()
Link: http://lkml.kernel.org/r/1568861888-34045-4-git-send-email-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only difference between notifier_chain_cond_register() and
notifier_chain_register() is the lack of warning hints for duplicate
registrations. Use notifier_chain_register() instead of
notifier_chain_cond_register() to avoid duplicate code
Link: http://lkml.kernel.org/r/1568861888-34045-3-git-send-email-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Registering the same notifier to a hook repeatedly can cause the hook
list to form a ring or lose other members of the list.
case1: An infinite loop in notifier_chain_register() can cause soft lockup
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_chain_register(&test_notifier_list, &test2);
case2: An infinite loop in notifier_chain_register() can cause soft lockup
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_call_chain(&test_notifier_list, 0, NULL);
case3: lose other hook test2
atomic_notifier_chain_register(&test_notifier_list, &test1);
atomic_notifier_chain_register(&test_notifier_list, &test2);
atomic_notifier_chain_register(&test_notifier_list, &test1);
case4: Unregister returns 0, but the hook is still in the linked list,
and it is not really registered. If you call
notifier_call_chain after ko is unloaded, it will trigger oops.
If the system is configured with softlockup_panic and the same hook is
repeatedly registered on the panic_notifier_list, it will cause a loop
panic.
Add a check in notifier_chain_register(), intercepting duplicate
registrations to avoid infinite loops
Link: http://lkml.kernel.org/r/1568861888-34045-2-git-send-email-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Like in commit 8b2303de39 ("serial: core: Fix handling of options
after MMIO address") we may use simple_strtoul() which in comparison to
kstrtoul() can do conversion in-place without additional and unnecessary
code to be written.
Link: http://lkml.kernel.org/r/20190801192904.41087-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There were discussions in the past about use cases for
simple_strto<foo>() functions and, in some rare cases, they have a
benefit over kstrto<foo>() ones.
Update a comment to reduce confusion about special use cases.
Link: http://lkml.kernel.org/r/20190801192904.41087-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A Fixes: lines in a commit message generally indicate that a previous
commit was inadequate for whatever reason.
The signers of the previous inadequate commit should also be cc'd on
this new commit so update get_maintainer to find the old commit and add
the original signers.
Link: http://lkml.kernel.org/r/33605b9fc0e0f711236951ae84185a6218acff4f.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Userspace cannot compile <linux/scc.h>
CC usr/include/linux/scc.h.s
In file included from <command-line>:32:0:
usr/include/linux/scc.h:20:20: error: `SIOCDEVPRIVATE' undeclared here (not in a function)
SIOCSCCRESERVED = SIOCDEVPRIVATE,
^~~~~~~~~~~~~~
Include <linux/sockios.h> to make it self-contained, and add it to the
compile-test coverage.
Link: http://lkml.kernel.org/r/20191108055809.26969-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Having BUILD_BUG_ON_ZERO produce a value of type size_t leads to awkward
casts in cases where the result needs to be signed, or of smaller type
than size_t. To avoid this, cast the value to int instead and rely on
implicit type conversions when a larger or unsigned type is needed.
Link: http://lkml.kernel.org/r/20190811184938.1796-3-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joe Perches <joe@perches.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Git is gaining support to display the closest node to the diff in the
hunk header via the 'dts' diff driver. Use that driver for all dts and
dtsi files so we can gain some more context on where the diff is.
Taking a recent commit in the kernel dts files you can see the
difference.
With this patch and an updated git
: diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
: index 62e07e1197cc..4c38426a6969 100644
: --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
: +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
: @@ -289,5 +289,29 @@ vdd_hdmi: regulator@1 {
: gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
: enable-active-high;
: };
: +
: + vdd_3v3_pcie: regulator@2 {
: + compatible = "regulator-fixed";
vs. without this patch
: diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
: index 62e07e1197cc..4c38426a6969 100644
: --- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
: +++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
: @@ -289,5 +289,29 @@
: gpio = <&gpio TEGRA194_MAIN_GPIO(A, 3) GPIO_ACTIVE_HIGH>;
: enable-active-high;
: };
: +
: + vdd_3v3_pcie: regulator@2 {
: + compatible = "regulator-fixed";
You can see that we don't know what the context node is because it isn't
shown after the '@@'.
dts is not released yet but it is staged to be in the next release[1].
One can probably build git from source and try it out.
[1] https://git.kernel.org/pub/scm/git/git.git/commit/?id=d49c2c3466d2c8cb0b3d0a43e6b406b07078fdb1
Link: http://lkml.kernel.org/r/20191004212311.141538-1-swboyd@chromium.org
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix coding style of "struct ctl_table" and "struct ctl_table_header" to
have inline braces.
Besides the wide use of this proposed cose style, this change helps to
find at a glance the struct definition when navigating the code.
Link: http://lkml.kernel.org/r/20190903154906.188651-1-balsini@android.com
Signed-off-by: Alessio Balsini <balsini@android.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ / /' -i */Kconfig
[adobriyan@gmail.com: add two spaces where necessary]
Link: http://lkml.kernel.org/r/20191124133936.GA5655@avx2
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
state_size and ops are in the wrong position.
Link: http://lkml.kernel.org/r/20190910021747.11216-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
List iteration takes more code than anything else which means embedded
list_head should be the first element of the structure.
Space savings:
add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-18 (-18)
Function old new delta
close_pdeo 228 227 -1
proc_reg_release 86 82 -4
proc_entry_rundown 143 139 -4
proc_reg_open 298 289 -9
Link: http://lkml.kernel.org/r/20191004234753.GB30246@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pointer to next '/' encodes length of path element and next start
position. Subtraction and increment are redundant.
Link: http://lkml.kernel.org/r/20191004234521.GA30246@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently gluing PDE into global /proc tree is done under lock, but
changing ->nlink is not. Additionally struct proc_dir_entry::nlink is
not atomic so updates can be lost.
Link: http://lkml.kernel.org/r/20190925202436.GA17388@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For hugely mapped thp, we use is_huge_zero_pmd() to check if it's zero
page or not.
We do fill ptes with my_zero_pfn() when we split zero thp pmd, but this
is not what we have in vm_normal_page_pmd() -- pmd_trans_huge_lock()
makes sure of it.
This is a trivial fix for /proc/pid/numa_maps, and AFAIK nobody
complains about it.
Gerald Schaefer asked:
: Maybe the description could also mention the symptom of this bug?
: I would assume that it affects anon/dirty accounting in gather_pte_stats(),
: for huge mappings, if zero page mappings are not correctly recognized.
I came across this while I was looking at the code, so I'm not aware of
any symptom.
Link: http://lkml.kernel.org/r/20191108192629.201556-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.ibm.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use common names from vmstat array when possible. This gives not much
difference in code size for now, but should help in keeping interfaces
consistent.
add/remove: 0/2 grow/shrink: 2/0 up/down: 70/-72 (-2)
Function old new delta
memory_stat_format 984 1050 +66
memcg_stat_show 957 961 +4
memcg1_event_names 32 - -32
mem_cgroup_lru_names 40 - -40
Total: Before=14485337, After=14485335, chg -0.00%
Link: http://lkml.kernel.org/r/157113012508.453.80391533767219371.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Statistics in vmstat is combined from counters with different structure,
but names for them are merged into one array.
This patch adds trivial helpers to get name for each item:
const char *zone_stat_name(enum zone_stat_item item);
const char *numa_stat_name(enum numa_stat_item item);
const char *node_stat_name(enum node_stat_item item);
const char *writeback_stat_name(enum writeback_stat_item item);
const char *vm_event_name(enum vm_event_item item);
Names for enum writeback_stat_item are folded in the middle of
vmstat_text so this patch moves declaration into header to calculate
offset of following items.
Also this patch reuses piece of node stat names for lru list names:
const char *lru_list_name(enum lru_list lru);
This returns common lru list names: "inactive_anon", "active_anon",
"inactive_file", "active_file", "unevictable".
[khlebnikov@yandex-team.ru: do not use size of vmstat_text as count of /proc/vmstat items]
Link: http://lkml.kernel.org/r/157152151769.4139.15423465513138349343.stgit@buzz
Link: https://lore.kernel.org/linux-mm/cd1c42ae-281f-c8a8-70ac-1d01d417b2e1@infradead.org/T/#u
Link: http://lkml.kernel.org/r/157113012325.453.562783073839432766.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christian reported a warning like the following obtained during running
some KVM-related tests on s390:
WARNING: CPU: 8 PID: 208 at lib/percpu-refcount.c:108 percpu_ref_exit+0x50/0x58
Modules linked in: kvm(-) xt_CHECKSUM xt_MASQUERADE bonding xt_tcpudp ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ip6table_na>
CPU: 8 PID: 208 Comm: kworker/8:1 Not tainted 5.2.0+ #66
Hardware name: IBM 2964 NC9 712 (LPAR)
Workqueue: events sysfs_slab_remove_workfn
Krnl PSW : 0704e00180000000 0000001529746850 (percpu_ref_exit+0x50/0x58)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 00000000ffff8808 0000001529746740 000003f4e30e8e18 0036008100000000
0000001f00000000 0035008100000000 0000001fb3573ab8 0000000000000000
0000001fbdb6de00 0000000000000000 0000001529f01328 0000001fb3573b00
0000001fbb27e000 0000001fbdb69300 000003e009263d00 000003e009263cd0
Krnl Code: 0000001529746842: f0a0000407fe srp 4(11,%r0),2046,0
0000001529746848: 47000700 bc 0,1792
#000000152974684c: a7f40001 brc 15,152974684e
>0000001529746850: a7f4fff2 brc 15,1529746834
0000001529746854: 0707 bcr 0,%r7
0000001529746856: 0707 bcr 0,%r7
0000001529746858: eb8ff0580024 stmg %r8,%r15,88(%r15)
000000152974685e: a738ffff lhi %r3,-1
Call Trace:
([<000003e009263d00>] 0x3e009263d00)
[<00000015293252ea>] slab_kmem_cache_release+0x3a/0x70
[<0000001529b04882>] kobject_put+0xaa/0xe8
[<000000152918cf28>] process_one_work+0x1e8/0x428
[<000000152918d1b0>] worker_thread+0x48/0x460
[<00000015291942c6>] kthread+0x126/0x160
[<0000001529b22344>] ret_from_fork+0x28/0x30
[<0000001529b2234c>] kernel_thread_starter+0x0/0x10
Last Breaking-Event-Address:
[<000000152974684c>] percpu_ref_exit+0x4c/0x58
---[ end trace b035e7da5788eb09 ]---
The problem occurs because kmem_cache_destroy() is called immediately
after deleting of a memcg, so it races with the memcg kmem_cache
deactivation.
flush_memcg_workqueue() at the beginning of kmem_cache_destroy() is
supposed to guarantee that all deactivation processes are finished, but
failed to do so. It waits for an rcu grace period, after which all
children kmem_caches should be deactivated. During the deactivation
percpu_ref_kill() is called for non root kmem_cache refcounters, but it
requires yet another rcu grace period to finish the transition to the
atomic (dead) state.
So in a rare case when not all children kmem_caches are destroyed at the
moment when the root kmem_cache is about to be gone, we need to wait
another rcu grace period before destroying the root kmem_cache.
This issue can be triggered only with dynamically created kmem_caches
which are used with memcg accounting. In this case per-memcg child
kmem_caches are created. They are deactivated from the cgroup removing
path. If the destruction of the root kmem_cache is racing with the
removal of the cgroup (both are quite complicated multi-stage
processes), the described issue can occur. The only known way to
trigger it in the real life, is to unload some kernel module which
creates a dedicated kmem_cache, used from different memory cgroups with
GFP_ACCOUNT flag. If the unloading happens immediately after calling
rmdir on the corresponding cgroup, there is some chance to trigger the
issue.
Link: http://lkml.kernel.org/r/20191129025011.3076017-1-guro@fb.com
Fixes: f0a3a24b53 ("mm: memcg/slab: rework non-root kmem_cache lifecycle management")
Signed-off-by: Roman Gushchin <guro@fb.com>
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I hit the following compile error in arch/x86/
mm/kasan/common.c: In function kasan_populate_vmalloc:
mm/kasan/common.c:797:2: error: implicit declaration of function flush_cache_vmap; did you mean flush_rcu_work? [-Werror=implicit-function-declaration]
flush_cache_vmap(shadow_start, shadow_end);
^~~~~~~~~~~~~~~~
flush_rcu_work
cc1: some warnings being treated as errors
Link: http://lkml.kernel.org/r/1575363013-43761-1-git-send-email-zhongjiang@huawei.com
Fixes: 3c5c3cfb9e ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Axtens <dja@axtens.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes:
- Missing __print_hex_dump undef for processing new function in trace events
- Stop WARN_ON messages when lockdown disables tracing on boot up
Enhancement:
- Debug option to inject trace events from userspace (for rasdaemon)
The enhancement has its own config option and is non invasive. It's been
discussed for sever months and should have been added to my original
push, but I never pulled it into my queue.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXehlhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlGgAQCszcDuNyVllj0VwWi4i+0FAQcI12Ad
W0NGZm0wObGExwD8CDR/CdHq9ulizFQjJfopG6b5Uc3Z4NNJ+QGnMxzBuwo=
=k31z
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
"Two fixes and one patch that was missed:
Fixes:
- Missing __print_hex_dump undef for processing new function in trace
events
- Stop WARN_ON messages when lockdown disables tracing on boot up
Enhancement:
- Debug option to inject trace events from userspace (for rasdaemon)"
The enhancement has its own config option and is non invasive. It's been
discussed for sever months and should have been added to my original
push, but I never pulled it into my queue.
* tag 'trace-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not create directories if lockdown is in affect
tracing: Introduce trace event injection
tracing: Fix __print_hex_dump scope
We recently changed this from a single list to an rbtree, but for some
real life workloads, the rbtree slows down the submission/insertion
case enough so that it's the top cycle consumer on the io_uring side.
In testing, using a hash table is a more well rounded compromise. It
is fast for insertion, and as long as it's sized appropriately, it
works well for the cancellation case as well. Running TAO with a lot
of network sockets, this removes io_poll_req_insert() from spending
2% of the CPU cycles.
Reported-by: Dan Melnic <dmm@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It looks like BPF program that handles BPF_SOCK_OPS_STATE_CB state
can race with the bpf_map_lookup_elem("global_map"); I sometimes
see the failures in this test and re-running helps.
Since we know that we expect the callback to be called 3 times (one
time for listener socket, two times for both ends of the connection),
let's export this number and add simple retry logic around that.
Also, let's make EXPECT_EQ() not return on failure, but continue
evaluating all conditions; that should make potential debugging
easier.
With this fix in place I don't observe the flakiness anymore.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Lawrence Brakmo <brakmo@fb.com>
Link: https://lore.kernel.org/bpf/20191204190955.170934-1-sdf@google.com
This increment of rmi_smbus in rmi_smb_read/write_block() causes
garbage to be read/written.
The first read of SMB_MAX_COUNT bytes is fine, but after that
it is nonsense. Trial-and-error showed that by dropping the
increment of rmiaddr everything is fine and the F54 function
properly works.
I tried a hack with rmi_smb_write_block() as well (writing to the
same F54 touchpad data area, then reading it back), and that
suggests that there too the rmiaddr increment has to be dropped.
It makes sense that if it has to be dropped for read, then it has
to be dropped for write as well.
It looks like the initial work with F54 was done using i2c, not smbus,
and it seems nobody ever tested F54 with smbus. The other functions
all read/write less than SMB_MAX_COUNT as far as I can tell, so this
issue was never noticed with non-F54 functions.
With this change I can read out the touchpad data correctly on my
Lenovo X1 Carbon 6th Gen laptop.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/8dd22e21-4933-8e9c-a696-d281872c8de7@xs4all.nl
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
F34 is a bit special as it reinitializes the device and related driver
structs during the firmware update. This clears the fn_irq_mask which
will then prevent F34 from receiving further interrupts, leading to
timeouts during the firmware update. Make sure to reinitialize the
IRQ enables at the appropriate times.
The issue is in F34 code, but the commit in the fixes tag exposed the
issue, as before this commit things would work by accident.
Fixes: 363c53875a (Input: synaptics-rmi4 - avoid processing unknown IRQs)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191129133514.23224-1-l.stach@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The touchscreen on the Teclast X89 is mounted upside down in relation to
the display orientation (the touchscreen itself is mounted upright, but the
display is mounted upside-down). Add a quirk for this so that we send
coordinates which match the display orientation.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20191202085636.6650-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add keycode for toggling electronic privacy screen to the keycodes
definition. Some new laptops have a privacy screen which can be toggled
with a key on the keyboard.
Signed-off-by: Mathew King <mathewk@chromium.org>
Link: https://lore.kernel.org/r/20191017163208.235518-1-mathewk@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Huang Shijie
Trent Piepho
Laura Abbott
Wei Yang
William Breathitt Gray
Joe Perches
Nathan Chancellor
Xiaoming Ni
Andy Shevchenko
Krzysztof Kozlowski
Masahiro Yamada
Rikard Falkeborn
Stephen Boyd
Alessio Balsini
Miaohe Lin
Alexey Dobriyan
Yu Zhao
Konstantin Khlebnikov
Roman Gushchin
zhong jiang
Linus Torvalds
Jens Axboe
Stanislav Fomichev
Hans Verkuil
Lucas Stach
Hans de Goede
Mathew King