Граф коммитов

154 Коммитов

Автор SHA1 Сообщение Дата
Al Viro ff01bb4832 fs: move code out of buffer.c
Move invalidate_bdev, block_sync_page into fs/block_dev.c.  Export
kill_bdev as well, so brd doesn't have to open code it.  Reduce
buffer_head.h requirement accordingly.

Removed a rather large comment from invalidate_bdev, as it looked a bit
obsolete to bother moving.  The small comment replacing it says enough.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-03 22:54:07 -05:00
Hugh Dickins 708e3508c2 tmpfs: clone shmem_file_splice_read()
Copy __generic_file_splice_read() and generic_file_splice_read() from
fs/splice.c to shmem_file_splice_read() in mm/shmem.c.  Make
page_cache_pipe_buf_ops and spd_release_page() accessible to it.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25 20:57:11 -07:00
Namhyung Kim 825cdcb1a5 splice: add wakeup_pipe_readers()
Add and use wakeup_pipe_readers() to consolidate duplicated codes.

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-05-23 19:58:53 +02:00
Linus Torvalds 275220f0fc Merge branch 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
  block: ensure that completion error gets properly traced
  blktrace: add missing probe argument to block_bio_complete
  block cfq: don't use atomic_t for cfq_group
  block cfq: don't use atomic_t for cfq_queue
  block: trace event block fix unassigned field
  block: add internal hd part table references
  block: fix accounting bug on cross partition merges
  kref: add kref_test_and_get
  bio-integrity: mark kintegrityd_wq highpri and CPU intensive
  block: make kblockd_workqueue smarter
  Revert "sd: implement sd_check_events()"
  block: Clean up exit_io_context() source code.
  Fix compile warnings due to missing removal of a 'ret' variable
  fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
  block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
  cfq-iosched: don't check cfqg in choose_service_tree()
  fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
  cdrom: export cdrom_check_events()
  sd: implement sd_check_events()
  sr: implement sr_check_events()
  ...
2011-01-13 10:45:01 -08:00
Michał Mirosław a8adbe378b fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
This patch pulls calls to buf->ops->confirm() from all actors passed
(also indirectly) to splice_from_pipe_feed().

Is avoiding the call to buf->ops->confirm() while splice()ing to
/dev/null is an intentional optimization? No other user does that
and this will remove this special case.

Against current linux.git 6313e3c217.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-12-17 08:56:44 +01:00
Linus Torvalds c66fb34794 Export 'get_pipe_info()' to other users
And in particular, use it in 'pipe_fcntl()'.

The other pipe functions do not need to use the 'careful' version, since
they are only ever called for things that are already known to be pipes.

The normal read/write/ioctl functions are called through the file
operations structures, so if a file isn't a pipe, they'd never get
called.  But pipe_fcntl() is special, and called directly from the
generic fcntl code, and needs to use the same careful function that the
splice code is using.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-28 14:09:57 -08:00
Linus Torvalds 71993e62a4 Rename 'pipe_info()' to 'get_pipe_info()'
.. and change it to take the 'file' pointer instead of an inode, since
that's what all users want anyway.

The renaming is preparatory to exporting it to other users.  The old
'pipe_info()' name was too generic and is already used elsewhere, so
before making the function public we need to use a more specific name.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-28 13:56:09 -08:00
Miklos Szeredi 6965031d33 splice: fix misuse of SPLICE_F_NONBLOCK
SPLICE_F_NONBLOCK is clearly documented to only affect blocking on the
pipe.  In __generic_file_splice_read(), however, it causes an EAGAIN
if the page is currently being read.

This makes it impossible to write an application that only wants
failure if the pipe is full.  For example if the same process is
handling both ends of a pipe and isn't otherwise able to determine
whether a splice to the pipe will fill it or not.

We could make the read non-blocking on O_NONBLOCK or some other splice
flag, but for now this is the simplest fix.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:52:56 +02:00
Andi Kleen 1676effca4 gcc-4.6: fs: fix unused but set warnings
No real bugs I believe, just some dead code, and some
shut up code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07 18:23:12 +02:00
Changli Gao 19c9a49b43 splice: check f_mode for seekable file
check f_mode for seekable file

As a seekable file is allowed without a llseek function, so the old way isn't
work any more.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
----
 fs/splice.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-30 08:12:37 +02:00
Changli Gao 2cb4b05e76 splice: direct_splice_actor() should not use pos in sd
direct_splice_actor() shouldn't use sd->pos, as sd->pos is for file reading,
file->f_pos should be used instead.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
----
 fs/splice.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-06-30 08:12:37 +02:00
Nick Piggin 0ae0b5d055 fs/splice.c: fix mapping_gfp_mask usage
mapping_gfp_mask() is not supposed to store allocation contex details,
only page location details.  So mapping_gfp_mask should be applied to the
pagecache page allocation, wheras normal (kernel mapped) memory should be
used for surrounding allocations such as radix-tree nodes allocated by
add_to_page_cache.  Context modifiers should be applied on a per-callsite
basis.

So change splice to follow this convention (which is followed in similar
code patterns in core code).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-25 10:25:26 +02:00
Jens Axboe 35f3d14dbb pipe: add support for shrinking and growing pipes
This patch adds F_GETPIPE_SZ and F_SETPIPE_SZ fcntl() actions for
growing and shrinking the size of a pipe and adjusts pipe.c and splice.c
(and relay and network splice) usage to work with these larger (or smaller)
pipes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-05-21 21:12:40 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Changli Gao cc56f7de7f sendfile(): check f_op.splice_write() rather than f_op.sendpage()
sendfile(2) was reworked with the splice infrastructure, but it still
checks f_op.sendpage() instead of f_op.splice_write() wrongly.  Although
if f_op.sendpage() exists, f_op.splice_write() always exists at the same
time currently, the assumption will be broken in future silently.  This
patch also brings a side effect: sendfile(2) can work with any output
file.  Some security checks related to f_op are added too.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-04 09:09:52 +01:00
Linus Torvalds 355bbd8cb8 Merge branch 'for-2.6.32' of git://git.kernel.dk/linux-2.6-block
* 'for-2.6.32' of git://git.kernel.dk/linux-2.6-block: (29 commits)
  block: use blkdev_issue_discard in blk_ioctl_discard
  Make DISCARD_BARRIER and DISCARD_NOBARRIER writes instead of reads
  block: don't assume device has a request list backing in nr_requests store
  block: Optimal I/O limit wrapper
  cfq: choose a new next_req when a request is dispatched
  Seperate read and write statistics of in_flight requests
  aoe: end barrier bios with EOPNOTSUPP
  block: trace bio queueing trial only when it occurs
  block: enable rq CPU completion affinity by default
  cfq: fix the log message after dispatched a request
  block: use printk_once
  cciss: memory leak in cciss_init_one()
  splice: update mtime and atime on files
  block: make blk_iopoll_prep_sched() follow normal 0/1 return convention
  cfq-iosched: get rid of must_alloc flag
  block: use interrupts disabled version of raise_softirq_irqoff()
  block: fix comment in blk-iopoll.c
  block: adjust default budget for blk-iopoll
  block: fix long lines in block/blk-iopoll.c
  block: add blk-iopoll, a NAPI like approach for block devices
  ...
2009-09-14 17:55:15 -07:00
Jan Kara 148f948ba8 vfs: Introduce new helpers for syncing after writing to O_SYNC file or IS_SYNC inode
Introduce new function for generic inode syncing (vfs_fsync_range) and use
it from fsync() path. Introduce also new helper for syncing after a sync
write (generic_write_sync) using the generic function.

Use these new helpers for syncing from generic VFS functions. This makes
O_SYNC writes to block devices acquire i_mutex for syncing. If we really
care about this, we can make block_fsync() drop the i_mutex and reacquire
it before it returns.

CC: Evgeniy Polyakov <zbr@ioremap.net>
CC: ocfs2-devel@oss.oracle.com
CC: Joel Becker <joel.becker@oracle.com>
CC: Felix Blyakher <felixb@sgi.com>
CC: xfs@oss.sgi.com
CC: Anton Altaparmakov <aia21@cantab.net>
CC: linux-ntfs-dev@lists.sourceforge.net
CC: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
CC: linux-ext4@vger.kernel.org
CC: tytso@mit.edu
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
2009-09-14 17:08:15 +02:00
Miklos Szeredi 723590ed52 splice: update mtime and atime on files
Splice should update the modification and access times on regular
files just like read and write. Not updating mtime will confuse
backup tools, etc...

This patch only adds the time updates for regular files.  For pipes
and other special files that splice touches the need for updating the
times is less clear.  Let's discuss and fix that separately.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-11 14:34:33 +02:00
Miklos Szeredi b2858d7d16 splice: fix kmaps in default_file_splice_write()
Unfortunately multiple kmap() within a single thread are deadlockable,
so writing out multiple buffers with writev() isn't possible.

Change the implementation so that it does a separate write() for each
buffer.  This actually simplifies the code a lot since the
splice_from_pipe() helper can be used.

This limitation is caused by HIGHMEM pages, and so only affects a
subset of architectures and configurations.  In the future it may be
worth to implement default_file_splice_write() in a more efficient way
on configs that allow it.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19 11:37:46 +02:00
Andrew Morton 77f6bf57ba splice: fix error return code
fs/splice.c: In function 'default_file_splice_read':
fs/splice.c:566: warning: 'error' may be used uninitialized in this function

which is sort-of true.  The code will in fact return -ENOMEM instead of the
kernel_readv() return value.

Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-14 09:49:44 +02:00
Jens Axboe 4f23122858 splice: fix repeated kmap()'s in default_file_splice_read()
We cannot reliably map more than one page at the time, or we risk
deadlocking. Just allocate the pages from low mem instead.

Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-13 08:35:35 +02:00
Miklos Szeredi 0b0a47f5c4 splice: implement default splice_write method
If f_op->splice_write() is not implemented, fall back to a plain write.
Use vfs_writev() to write from the pipe buffers.

This will allow splice on all filesystems and file types.  This
includes "direct_io" files in fuse which bypass the page cache.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 14:13:10 +02:00
Miklos Szeredi 6818173bd6 splice: implement default splice_read method
If f_op->splice_read() is not implemented, fall back to a plain read.
Use vfs_readv() to read into previously allocated pages.

This will allow splice and functions using splice, such as the loop
device, to work on all filesystems.  This includes "direct_io" files
in fuse which bypass the page cache.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 14:13:10 +02:00
Miklos Szeredi 7c77f0b3f9 splice: implement pipe to pipe splicing
Allow splice(2) to work when both the input and the output is a pipe.

Based on the impementation of the tee(2) syscall, but instead of
duplicating the buffer references move the buffers from the input pipe
to the output pipe.

Moving the whole buffer only succeeds if the full length of the buffer
is spliced.  Otherwise duplicate the buffer, just like tee(2), set the
length of the output buffer and advance the offset on the input
buffer.

Since splice is operating on two pipes, special care needs to be taken
with locking to prevent AN ABBA deadlock.  Again this is done
similarly to the tee(2) syscall, first preparing the input and output
pipes so there's data to consume and space for that data, and then
doing the move operation while holding both locks.

If other processes are doing I/O on the same pipes parallel to the
splice, then by the time both inodes are locked there might be no
buffers left to move, or no space to move them to.  In this case retry
the whole operation, including the preparation phase.  This could lead
to starvation, but I'm not sure if that's serious enough to worry
about.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-11 14:13:09 +02:00
Randy Dunlap b80901bbf5 splice: fix new kernel-doc warnings
splice: fix kernel-doc warnings

  Warning(fs/splice.c:617): bad line:
  Warning(fs/splice.c:722): No description found for parameter 'sd'
  Warning(fs/splice.c:722): Excess function parameter 'pipe' description in 'splice_from_pipe_begin'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-17 07:38:07 -07:00
Miklos Szeredi 61e0d47c33 splice: add helpers for locking pipe inode
There are lots of sequences like this, especially in splice code:

	if (pipe->inode)
		mutex_lock(&pipe->inode->i_mutex);
	/* do something */
	if (pipe->inode)
		mutex_unlock(&pipe->inode->i_mutex);

so introduce helpers which do the conditional locking and unlocking.
Also replace the inode_double_lock() call with a pipe_double_lock()
helper to avoid spreading the use of this functionality beyond the
pipe code.

This patch is just a cleanup, and should cause no behavioral changes.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:10:12 +02:00
Miklos Szeredi f8cc774ce4 splice: remove generic_file_splice_write_nolock()
Remove the now unused generic_file_splice_write_nolock() function.
It's conceptually broken anyway, because splice may need to wait for
pipe events so holding locks across the whole operation is wrong.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:10:12 +02:00
Miklos Szeredi 328eaaba4e ocfs2: fix i_mutex locking in ocfs2_splice_to_file()
Rearrange locking of i_mutex on destination and call to
ocfs2_rw_lock() so locks are only held while buffers are copied with
the pipe_to_file() actor, and not while waiting for more data on the
pipe.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:10:12 +02:00
Miklos Szeredi eb443e5a25 splice: fix i_mutex locking in generic_splice_write()
Rearrange locking of i_mutex on destination so it's only held while
buffers are copied with the pipe_to_file() actor, and not while
waiting for more data on the pipe.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:10:11 +02:00
Miklos Szeredi 2933970b96 splice: remove i_mutex locking in splice_from_pipe()
splice_from_pipe() is only called from two places:

  - generic_splice_sendpage()
  - splice_write_null()

Neither of these require i_mutex to be taken on the destination inode.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:10:11 +02:00
Miklos Szeredi b3c2d2ddd6 splice: split up __splice_from_pipe()
Split up __splice_from_pipe() into four helper functions:

  splice_from_pipe_begin()
  splice_from_pipe_next()
  splice_from_pipe_feed()
  splice_from_pipe_end()

splice_from_pipe_next() will wait (if necessary) for more buffers to
be added to the pipe.  splice_from_pipe_feed() will feed the buffers
to the supplied actor and return when there's no more data available
(or if all of the requested data has been copied).

This is necessary so that implementations can do locking around the
non-waiting splice_from_pipe_feed().

This patch should not cause any change in behavior.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-04-15 12:10:11 +02:00
Miklos Szeredi 7bfac9ecf0 splice: fix deadlock in splicing to file
There's a possible deadlock in generic_file_splice_write(),
splice_from_pipe() and ocfs2_file_splice_write():

 - task A calls generic_file_splice_write()
 - this calls inode_double_lock(), which locks i_mutex on both
   pipe->inode and target inode
 - ordering depends on inode pointers, can happen that pipe->inode is
   locked first
 - __splice_from_pipe() needs more data, calls pipe_wait()
 - this releases lock on pipe->inode, goes to interruptible sleep
 - task B calls generic_file_splice_write(), similarly to the first
 - this locks pipe->inode, then tries to lock inode, but that is
   already held by task A
 - task A is interrupted, it tries to lock pipe->inode, but fails, as
   it is already held by task B
 - ABBA deadlock

Fix this by explicitly ordering locks: the outer lock must be on
target inode and the inner lock (which is later unlocked and relocked)
must be on pipe->inode.  This is OK, pipe inodes and target inodes
form two nonoverlapping sets, generic_file_splice_write() and friends
are not called with a target which is a pipe.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Mark Fasheh <mfasheh@suse.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:34:46 -07:00
David Howells 266cf658ef FS-Cache: Recruit a page flags for cache management
Recruit a page flag to aid in cache management.  The following extra flag is
defined:

 (1) PG_fscache (PG_private_2)

     The marked page is backed by a local cache and is pinning resources in the
     cache driver.

If PG_fscache is set, then things that checked for PG_private will now also
check for that.  This includes things like truncation and page invalidation.
The function page_has_private() had been added to make the checks for both
PG_private and PG_private_2 at the same time.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Tested-by: Daire Byrne <Daire.Byrne@framestore.com>
2009-04-03 16:42:36 +01:00
Heiko Carstens 836f92adf1 [CVE-2009-0029] System call wrappers part 31
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-14 14:15:31 +01:00
KAMEZAWA Hiroyuki 08e552c69c memcg: synchronized LRU
A big patch for changing memcg's LRU semantics.

Now,
  - page_cgroup is linked to mem_cgroup's its own LRU (per zone).

  - LRU of page_cgroup is not synchronous with global LRU.

  - page and page_cgroup is one-to-one and statically allocated.

  - To find page_cgroup is on what LRU, you have to check pc->mem_cgroup as
    - lru = page_cgroup_zoneinfo(pc, nid_of_pc, zid_of_pc);

  - SwapCache is handled.

And, when we handle LRU list of page_cgroup, we do following.

	pc = lookup_page_cgroup(page);
	lock_page_cgroup(pc); .....................(1)
	mz = page_cgroup_zoneinfo(pc);
	spin_lock(&mz->lru_lock);
	.....add to LRU
	spin_unlock(&mz->lru_lock);
	unlock_page_cgroup(pc);

But (1) is spin_lock and we have to be afraid of dead-lock with zone->lru_lock.
So, trylock() is used at (1), now. Without (1), we can't trust "mz" is correct.

This is a trial to remove this dirty nesting of locks.
This patch changes mz->lru_lock to be zone->lru_lock.
Then, above sequence will be written as

        spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU
	mem_cgroup_add/remove/etc_lru() {
		pc = lookup_page_cgroup(page);
		mz = page_cgroup_zoneinfo(pc);
		if (PageCgroupUsed(pc)) {
			....add to LRU
		}
        spin_lock(&zone->lru_lock); # in vmscan.c or swap.c via global LRU

This is much simpler.
(*) We're safe even if we don't take lock_page_cgroup(pc). Because..
    1. When pc->mem_cgroup can be modified.
       - at charge.
       - at account_move().
    2. at charge
       the PCG_USED bit is not set before pc->mem_cgroup is fixed.
    3. at account_move()
       the page is isolated and not on LRU.

Pros.
  - easy for maintenance.
  - memcg can make use of laziness of pagevec.
  - we don't have to duplicated LRU/Active/Unevictable bit in page_cgroup.
  - LRU status of memcg will be synchronized with global LRU's one.
  - # of locks are reduced.
  - account_move() is simplified very much.
Cons.
  - may increase cost of LRU rotation.
    (no impact if memcg is not configured.)

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-08 08:31:05 -08:00
Nick Piggin 4e02ed4b4a fs: remove prepare_write/commit_write
Nothing uses prepare_write or commit_write. Remove them from the tree
completely.

[akpm@linux-foundation.org: schedule simple_prepare_write() for unexporting]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-30 11:38:45 -07:00
Linus Torvalds efc968d450 Don't allow splice() to files opened with O_APPEND
This is debatable, but while we're debating it, let's disallow the
combination of splice and an O_APPEND destination.

It's not entirely clear what the semantics of O_APPEND should be, and
POSIX apparently expects pwrite() to ignore O_APPEND, for example.  So
we could make up any semantics we want, including the old ones.

But Miklos convinced me that we should at least give it some thought,
and that accepting writes at arbitrary offsets is wrong at least for
IS_APPEND() files (which always have O_APPEND set, even if the reverse
isn't true: you can obviously have O_APPEND set on a regular file).

So disallow O_APPEND entirely for now.  I doubt anybody cares, and this
way we have one less gray area to worry about.

Reported-and-argued-for-by: Miklos Szeredi <miklos@szeredi.hu>
Acked-by: Jens Axboe <ens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-09 14:26:38 -07:00
Nick Piggin 529ae9aaa0 mm: rename page trylock
Converting page lock to new locking bitops requires a change of page flag
operation naming, so we might as well convert it to something nicer
(!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked).

This also facilitates lockdeping of page lock.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-04 21:31:34 -07:00
Miklos Szeredi 2f1936b877 [patch 3/5] vfs: change remove_suid() to file_remove_suid()
All calls to remove_suid() are made with a file pointer, because
(similarly to file_update_time) it is called when the file is written.

Clean up callers by passing in a file instead of a dentry.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2008-07-26 20:53:16 -04:00
Nick Piggin bc40d73c95 splice: use get_user_pages_fast
Use get_user_pages_fast in splice.  This reverts some mmap_sem batching
there, however the biggest problem with mmap_sem tends to be hold times
blocking out other threads rather than cacheline bouncing.  Further: on
architectures that implement get_user_pages_fast without locks, mmap_sem
can be avoided completely anyway.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 12:00:06 -07:00
Miklos Szeredi 32502b8413 splice: fix generic_file_splice_read() race with page invalidation
If a page was invalidated during splicing from file to a pipe, then
generic_file_splice_read() could return a short or zero count.

This manifested itself in rare I/O errors seen on nfs exported fuse
filesystems.  This is because nfsd uses splice_direct_to_actor() to read
files, and fuse uses invalidate_inode_pages2() to invalidate stale data on
open.

Fix by redoing the page find/create if it was found to be truncated
(invalidated).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-07-04 09:52:14 +02:00
Jens Axboe ca39d651d1 splice: handle try_to_release_page() failure
splice currently assumes that try_to_release_page() always suceeds,
but it can return failure. If it does, we cannot steal the page.

Acked-by: Mingming Cao <cmm@us.ibm.com
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-28 14:49:27 +02:00
Tom Zanussi a82c53a0e3 splice: fix sendfile() issue with relay
Splice isn't always incrementing the ppos correctly, which broke
relay splice.

Signed-off-by: Tom Zanussi <zanussi@comcast.net>
Tested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-28 14:49:27 +02:00
Jens Axboe 75065ff619 Revert "relay: fix splice problem"
This reverts commit c3270e577c.
2008-05-08 14:06:19 +02:00
Miklos Szeredi 7f3d4ee108 vfs: splice remove_suid() cleanup
generic_file_splice_write() duplicates remove_suid() just because it
doesn't hold i_mutex.  But it grabs i_mutex inside splice_from_pipe()
anyway, so this is rather pointless.

Move locking to generic_file_splice_write() and call remove_suid() and
__splice_from_pipe() instead.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-05-07 09:29:00 +02:00
Tom Zanussi c3270e577c relay: fix splice problem
Splice isn't always incrementing the ppos correctly, which broke
relay splice.

Signed-off-by: Tom Zanussi <zanussi@comcast.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-29 09:48:15 +02:00
Jens Axboe 8191ecd1d1 splice: fix infinite loop in generic_file_splice_read()
There's a quirky loop in generic_file_splice_read() that could go
on indefinitely, if the file splice returns 0 permanently (and not
just as a temporary condition). Get rid of the loop and pass
back -EAGAIN correctly from __generic_file_splice_read(), so we
handle that condition properly as well.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-04-10 08:24:25 +02:00
Hugh Dickins 4cd1350465 splice: use mapping_gfp_mask
The loop block driver is careful to mask __GFP_IO|__GFP_FS out of its
mapping_gfp_mask, to avoid hangs under memory pressure.  But nowadays
it uses splice, usually going through __generic_file_splice_read.  That
must use mapping_gfp_mask instead of GFP_KERNEL to avoid those hangs.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-03 15:39:49 -07:00
Jens Axboe 02cf01aea5 splice: only return -EAGAIN if there's hope of more data
sys_tee() currently is a bit eager in returning -EAGAIN, it may do so
even if we don't have a chance of anymore data becoming available. So
improve the logic and only return -EAGAIN if we have an attached writer
to the input pipe.

Reported by Johann Felix Soden <johfel@gmx.de> and
Patrick McManus <mcmanus@ducksong.com>.

Tested-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-03-04 11:14:39 +01:00
Bastian Blank 712a30e63c splice: fix user pointer access in get_iovec_page_array()
Commit 8811930dc7 ("splice: missing user
pointer access verification") added the proper access_ok() calls to
copy_from_user_mmap_sem() which ensures we can copy the struct iovecs
from userspace to the kernel.

But we also must check whether we can access the actual memory region
pointed to by the struct iovec to fix the access checks properly.

Signed-off-by: Bastian Blank <waldi@debian.org>
Acked-by: Oliver Pinter <oliver.pntr@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-10 10:27:21 -08:00