Add support for P2 clock which is sourced from pll3_div2_4_2.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As per RZ/G2L HW Manual(Rev.0.50) P1 is sourced from pll3_div2_4.
So fix the clock definitions for P1.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As per RZ/G2L HW Manual (Rev.0.50), CPG_PL3A_DDIV,CPG_PL3B_DDIV
and CPG_PL2_DDIV(for P0) shares same divider table entries. Rename
clk_div_table dtable_3b to clk_div_table dtable_1_32 so that it
can be reused.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210626081344.5783-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
- A handful of fixes for lmk04832 driver
- Migrate the basic clk divider to use determine rate ops
- Fix modpost build for hisilicon hi3559a driver
- Actually set the parent in k210_clk_set_parent()
-----BEGIN PGP SIGNATURE-----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=Tk4i
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
- A handful of fixes for lmk04832 driver
- Migrate the basic clk divider to use determine rate ops
- Fix modpost build for hisilicon hi3559a driver
- Actually set the parent in k210_clk_set_parent()
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
Revert "clk: divider: Switch from .round_rate to .determine_rate by default"
clk: hisilicon: hi3559a: Drop __init markings everywhere
clk: meson: regmap: switch to determine_rate for the dividers
clk: divider: Switch from .round_rate to .determine_rate by default
clk: divider: Add re-usable determine_rate implementations
clk: k210: Fix k210_clk_set_parent()
clk: lmk04832: Fix spelling mistakes in dev_err messages and comments
clk: lmk04832: fix return value check in lmk04832_probe()
clk: stm32mp1: fix missing spin_lock_init()
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
This reverts commit db400ac144. We have
drivers that are still using the .round_rate ops from here. We could
implement both determine_rate and round_rate for these divider ops, but
for now let's just kick out the commit that tried to change it and
convert various drivers properly.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: db400ac144 ("clk: divider: Switch from .round_rate to .determine_rate by default")
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210702011058.77284-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
that's just a bunch of data so the diffstat reflects that. Looking beyond that
there's just a bunch of updates all around in various clk drivers. Renesas and
NXP (for i.MX) are two SoC vendors that have a lot of patches in here. Overall
the driver changes look to be mostly enabling more clks and non-critical fixes
that we could hold until the next merge window.
I'm especially excited about the series from Arnd that graduates clkdev to be
the only implementation of clk_get() and clk_put(). That's a good step in the
right direction to migreate eveerything over to the common clk framework. Now
we don't have to worry about clkdev specific details, they're just part of the
clk API now.
Core:
- clkdev is now the only option, i.e. clk_get()/clk_put() is implemented in
only one place in the kernel instead of in drivers/clk/clkdev.c and in
architectures that want their own implementation
New Drivers:
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock
Jitter Cleaner With Dual Loop PLLs
- Qualcomm MDM9607 GCC
- Qualcomm SC8180X display clks
- Qualcomm SM6125 GCC
- Qualcomm SM8250 CAMCC (camera)
- Renesas RZ/G2L SoC
- Hisilicon hi3559A SoC
Updates:
- Stop using clock-output-names in ST clk drivers (yay!)
- Support secure mode of STM32MP1 SoCs
- Improve clock support for Actions S500 SoC
- duty cycle setting support on qcom clks
- Add TI am33xx spread spectrum clock support
- Use determine_rate() for the Amlogic pll ops instead of round_rate()
- Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
- Improve Amlogic axg-audio controller error on deferral
- Add NNA clocks on Amlogic g12a
- Reduce memory footprint of Rockchip PLL rate tables
- A fix for the newly added Rockchip rk3568 clk driver
- Exported clock for the newly added Rockchip video decoder
- Remove audio ipg clock from i.MX8MP
- Remove deprecated legacy clock binding for i.MX SCU clock driver
- Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
- Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio,
parallel interface)
- Add dedicated clock ops for i.MX paralel interface
- Different fixes for clocks controlled by ATF on i.MX SoCs
- Add A53/A72 frequency scaling support i.MX clk-scu driver
- Add special case for DCSS clock on suspend for i.MX clk-scu driver
- Add parent save/restore on suspend/resume to i.MX clk-scu driver
- Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
- Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
bindings
- Tegra clk driver no longer deasserts resets on clk_enable as it
gets in the way of certain power-up sequences
- Fix compile testing for Tegra clk driver
- One patch to fix a divider on the Allwinner v3s Audio PLL
- Add support for CPU core clock boost modes on Renesas R-Car Gen3
- Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
- Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate()
and improve support for multiple parents
- Switch Renesas RZ/N1 divider clocks to .determine_rate()
- Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
- Convert ar7 to common clk framework
- Convert ralink to common clk framework
-----BEGIN PGP SIGNATURE-----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=YnCF
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This round has a diffstat dominated by Qualcomm clk drivers. Honestly
though that's just a bunch of data so the diffstat reflects that.
Looking beyond that there's just a bunch of updates all around in
various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors
that have a lot of patches in here.
Overall the driver changes look to be mostly enabling more clks and
non-critical fixes that we could hold until the next merge window.
I'm especially excited about the series from Arnd that graduates
clkdev to be the only implementation of clk_get() and clk_put().
That's a good step in the right direction to migreate eveerything over
to the common clk framework. Now we don't have to worry about clkdev
specific details, they're just part of the clk API now.
Core:
- clkdev is now the only option, i.e. clk_get()/clk_put() is
implemented in only one place in the kernel instead of in
drivers/clk/clkdev.c and in architectures that want their own
implementation
New Drivers:
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant
Clock Jitter Cleaner With Dual Loop PLLs
- Qualcomm MDM9607 GCC
- Qualcomm SC8180X display clks
- Qualcomm SM6125 GCC
- Qualcomm SM8250 CAMCC (camera)
- Renesas RZ/G2L SoC
- Hisilicon hi3559A SoC
Updates:
- Stop using clock-output-names in ST clk drivers (yay!)
- Support secure mode of STM32MP1 SoCs
- Improve clock support for Actions S500 SoC
- duty cycle setting support on qcom clks
- Add TI am33xx spread spectrum clock support
- Use determine_rate() for the Amlogic pll ops instead of
round_rate()
- Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
- Improve Amlogic axg-audio controller error on deferral
- Add NNA clocks on Amlogic g12a
- Reduce memory footprint of Rockchip PLL rate tables
- A fix for the newly added Rockchip rk3568 clk driver
- Exported clock for the newly added Rockchip video decoder
- Remove audio ipg clock from i.MX8MP
- Remove deprecated legacy clock binding for i.MX SCU clock driver
- Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
- Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif,
audio, parallel interface)
- Add dedicated clock ops for i.MX paralel interface
- Different fixes for clocks controlled by ATF on i.MX SoCs
- Add A53/A72 frequency scaling support i.MX clk-scu driver
- Add special case for DCSS clock on suspend for i.MX clk-scu driver
- Add parent save/restore on suspend/resume to i.MX clk-scu driver
- Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
- Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
bindings
- Tegra clk driver no longer deasserts resets on clk_enable as it
gets in the way of certain power-up sequences
- Fix compile testing for Tegra clk driver
- One patch to fix a divider on the Allwinner v3s Audio PLL
- Add support for CPU core clock boost modes on Renesas R-Car Gen3
- Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
- Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and
improve support for multiple parents
- Switch Renesas RZ/N1 divider clocks to .determine_rate()
- Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
- Convert ar7 to common clk framework
- Convert ralink to common clk framework"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits)
clk: zynqmp: Handle divider specific read only flag
clk: zynqmp: Use firmware specific mux clock flags
clk: zynqmp: Use firmware specific divider clock flags
clk: zynqmp: Use firmware specific common clock flags
clk: lmk04832: Use of match table
clk: lmk04832: Depend on SPI
clk: stm32mp1: new compatible for secure RCC support
dt-bindings: clock: stm32mp1 new compatible for secure rcc
dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
reset: stm32mp1: remove stm32mp1 reset
clk: hisilicon: Add clock driver for hi3559A SoC
dt-bindings: Document the hi3559a clock bindings
clk: si5341: Add sysfs properties to allow checking/resetting device faults
clk: si5341: Add silabs,iovdd-33 property
clk: si5341: Add silabs,xaxb-ext-clk property
clk: si5341: Allow different output VDD_SEL values
clk: si5341: Update initialization magic
clk: si5341: Check for input clock presence and PLL lock on startup
...
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This driver is a platform driver. The probe function can be called after
kernel init, and try to reference kernel memory that has been freed.
Drop the __init markings everywhere here to avoid referencing initdata
from non-init code. Fixes modpost warnings.
Reported-by: kernel test robot <lkp@intel.com>
Cc: Dongjiu Geng <gengdongjiu@huawei.com>
Fixes: 6c81966107 ("clk: hisilicon: Add clock driver for hi3559A SoC")
Link: https://lore.kernel.org/r/20210630185839.3680834-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This increases the maxmium supported frequency on 32-bit systems from
2^31 (signed long as used by clk_ops.round_rate, maximum value:
approx. 2.14GHz) to 2^32 (unsigned long as used by
clk_ops.determine_rate, maximum value: approx. 4.29GHz).
On Meson8/8b/8m2 the HDMI PLL and it's OD (post-dividers) are
capable of running at up to 2.97GHz. So switch the divider
implementation in clk-regmap to clk_ops.determine_rate to support these
higher frequencies on 32-bit systems.
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210627223959.188139-4-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
.determine_rate is meant to replace .round_rate. The former comes with a
benefit which is especially relevant on 32-bit systems: since
.determine_rate uses an "unsigned long" (compared to a "signed long"
which is used by .round_rate) the maximum value on 32-bit systems
increases from 2^31 (or approx. 2.14GHz) to 2^32 (or approx. 4.29GHz).
Switch to a .determine_rate implementation by default so 32-bit systems
can benefit from the increased maximum value as well as so we have one
fewer user of .round_rate.
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210627223959.188139-3-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
These are useful when running on 32-bit systems to increase the upper
supported frequency limit. clk_ops.round_rate returns a signed long
which limits the maximum rate on 32-bit systems to 2^31 (or approx.
2.14GHz). clk_ops.determine_rate internally uses an unsigned long so
the maximum rate on 32-bit systems is 2^32 or approx. 4.29GHz.
To avoid code-duplication switch over divider_{ro_,}round_rate_parent
to use the new divider_{ro_,}determine_rate functions.
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20210627223959.188139-2-martin.blumenstingl@googlemail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In k210_clk_set_parent(), add missing writel() call to update the mux
register of a clock to change its parent. This also fixes a compilation
warning with clang when compiling with W=1.
Fixes: c6ca7616f7 ("clk: Add RISC-V Canaan Kendryte K210 clock driver")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://lore.kernel.org/r/20210622064502.14841-1-damien.lemoal@wdc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In case of error, the function devm_kzalloc() and devm_kcalloc() return
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Fixes: 3bc61cfd6f ("clk: add support for the lmk04832")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20210630020322.2555946-1-wanghai38@huawei.com
Reviewed-by: Liam Beguin <lvb@xiphos.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.
Fixes: c392df194a ("clk: stm32mp1: move RCC reset controller into RCC clock driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20210630015824.2555840-1-wanghai38@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock
Jitter Cleaner With Dual Loop PLLs
- Support secure mode of STM32MP1 SoCs
- Improve clock support for Actions S500 SoC
* clk-lmk04832:
clk: lmk04832: Use of match table
clk: lmk04832: Depend on SPI
clk: lmk04832: add support for digital delay
clk: add support for the lmk04832
dt-bindings: clock: add ti,lmk04832 bindings
* clk-stm:
clk: stm32mp1: new compatible for secure RCC support
dt-bindings: clock: stm32mp1 new compatible for secure rcc
dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
reset: stm32mp1: remove stm32mp1 reset
clk: stm32mp1: move RCC reset controller into RCC clock driver
clk: stm32mp1: convert to module driver
clk: stm32mp1: remove intermediate pll clocks
clk: stm32mp1: merge 'ck_hse_rtc' and 'ck_rtc' into one clock
clk: stm32mp1: merge 'clk-hsi-div' and 'ck_hsi' into one clock
* clk-rohm:
clk: bd718xx: Drop BD70528 support
* clk-actions:
clk: actions: Add NIC and ETHERNET clock support for Actions S500 SoC
dt-bindings: clock: Add NIC and ETHERNET bindings for Actions S500 SoC
clk: actions: Fix AHPPREDIV-H-AHB clock chain on Owl S500 SoC
clk: actions: Fix bisp_factor_table based clocks on Owl S500 SoC
clk: actions: Fix SD clocks factor table on Owl S500 SoC
clk: actions: Fix UART clock dividers on Owl S500 SoC
* clk-ingenic:
clk: ingenic: Add support for the JZ4760
clk: ingenic: Support overriding PLLs M/N/OD calc algorithm
clk: ingenic: Remove pll_info.no_bypass_bit
clk: ingenic: Read bypass register only when there is one
clk: Support bypassing dividers
dt-bindings: clock: ingenic: Add ingenic,jz4760{,b}-cgu compatibles
Currently firmware passes CCF specific flags to ZynqMP clock driver.
So firmware needs to be updated if CCF flags are changed. The firmware
should have its own 'flag number space' that is distinct from the
common clk framework's 'flag number space'. So define and use ZynqMP
specific common clock flags instead of using CCF flags.
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/20210628070122.26217-2-rajan.vaja@xilinx.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Presumably we want to use this match table so add a module device table
and set the driver match pointer appropriately.
Reported-by: kernel test robot <lkp@intel.com>
Cc: Liam Beguin <lvb@xiphos.com>
Fixes: 3bc61cfd6f ("clk: add support for the lmk04832")
Link: https://lore.kernel.org/r/20210629060751.3119453-2-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This driver depends on SPI. Otherwise compilation fails
clk-lmk04832.c:(.text+0x1668): undefined reference to `spi_get_device_id'
Reported-by: kernel test robot <lkp@intel.com>
Cc: Liam Beguin <lvb@xiphos.com>
Fixes: 3bc61cfd6f ("clk: add support for the lmk04832")
Link: https://lore.kernel.org/r/20210629060751.3119453-1-sboyd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Platform STM32MP1 can be used in configuration where some clock
resources cannot be accessed by Linux kernel when executing in non-secure
state of the CPU(s).
In such configuration, the RCC clock driver must not register clocks
it cannot access.
They are expected to be registered from another clock driver such
as the SCMI clock driver.
This change uses specific compatible string "st,stm32mp1-rcc-secure"
to specify RCC clock driver configuration where RCC is secure.
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Link: https://lore.kernel.org/r/20210617051814.12018-12-gabriel.fernandez@foss.st.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add clock drivers for hi3559A SoC, this driver
controls the SoC registers to supply different
clocks to different IPs in the SoC.
Signed-off-by: Dongjiu Geng <gengdongjiu@huawei.com>
Link: https://lore.kernel.org/r/1616498973-47067-3-git-send-email-gengdongjiu1@gmail.com
[sboyd@kernel.org: Mark arrays static, add __iomem, drop unused array,
avoid kfree of devm memory]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add sysfs property files to allow viewing the current and latched states of
the input present and PLL lock bits, and allow resetting the latched fault
state. This allows manual checks or automated userspace polling for faults
occurring after initialization.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-10-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a property to allow specifying that the external I2C IO pins are using
3.3V voltage thresholds rather than 1.8V.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-9-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add a property to allow specifying that the device XA/XB pins are used for
an external clock input rather than for a clock crystal.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-8-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver was not previously programming the VDD_SEL values for each
output to indicate what external VDDO voltage was used for each. Add
ability to specify a regulator supplying the VDDO pin for each output of
the device. The voltage of the regulator is used to automatically set the
VDD_SEL value appropriately. If no regulator is specified and the chip is
being reconfigured, assume 2.5V which appears to be the chip default.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-7-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Update the default register settings to include the VCO_RESET_CALCODE
settings (set by the SiLabs ClockBuilder software but not described in
the datasheet). Also update part of the initialization sequence to match
ClockBuilder and the datasheet.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-6-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
After initializing the device, wait for it to report that the input
clock is present and the PLL has locked before declaring success.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-5-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
If the Si5341 is being initially programmed and has no stored NVM
configuration, some of the register contents may contain unexpected
values, such as zeros, which could cause divide by zero errors during
driver initialization. Trap errors caused by zero registers or zero clock
rates which could result in divide errors later in the code.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-4-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Si5341 datasheet warns that before accessing any other registers,
including the PAGE register, we need to wait for the DEVICE_READY register
to indicate the device is ready, or the process of the device loading its
state from NVM can be corrupted. Wait for DEVICE_READY on startup before
continuing initialization. This is done using a raw I2C register read
prior to setting up regmap to avoid any potential unwanted automatic PAGE
register accesses from regmap at this stage.
Fixes: 3044a860fd ("clk: Add Si5341/Si5340 driver")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20210325192643.2190069-3-robert.hancock@calian.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Yu Jiahua <yujiahua1@huawei.com>
Link: https://lore.kernel.org/r/20210616034826.37276-1-yujiahua1@huawei.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to avoid relying on the old style description via the DT
clock-output-names, add compatible data describing the flexgen
outputs clocks for all STiH407/STiH410 and STiH418 SOCs.
In order to ease transition between the two methods, this commit
introduce the new compatible without removing the old method.
Once DTs will be fixed, the method relying on DT clock-output-names
will be removed from this driver as well as old compatibles.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20210331201632.24530-7-avolmat@me.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to avoid relying on the old style description via the DT
clock-output-names, add compatible data describing the flexgen
outputs clocks for all STiH407/STiH410 and STiH418 SOCs.
In order to ease transition between the two methods, this commit
introduce the new compatible without removing the old method.
Once DTs will be fixed, the method relying on DT clock-output-names
will be removed from this driver as well as old compatibles.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20210331201632.24530-5-avolmat@me.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
In order to avoid relying on the old style description via the DT
clock-output-names, add compatible data describing the flexgen
outputs clocks for all STiH407/STiH410 and STiH418 SOCs.
In order to ease transition between the two methods, this commit
introduce the new compatible without removing the old method.
Once DTs will be fixed, the method relying on DT clock-output-names
will be removed from this driver as well as old compatibles.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20210331201632.24530-3-avolmat@me.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
ODF field within the struct clkgen_pll is never used by the driver
and can thus be removed.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20210331201632.24530-2-avolmat@me.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
SoC-specific code can now provide a callback if they need to compute the
M/N/OD values in a specific way.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: 周琰杰 (Zhou Yanjie)<zhouyanjie@wanyeetech.com> # on CU1000-neo/X1000E
Link: https://lore.kernel.org/r/20210530164923.18134-6-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
We can express that a PLL has no bypass bit by simply setting the
.bypass_bit field to a negative value.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210530164923.18134-5-paul@crapouillou.net
Tested-by: 周琰杰 (Zhou Yanjie)<zhouyanjie@wanyeetech.com> # on CU1830-neo/X1830
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Rework the clock code so that the bypass register is only read when
there is actually a bypass functionality.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210530164923.18134-4-paul@crapouillou.net
Tested-by: 周琰杰 (Zhou Yanjie)<zhouyanjie@wanyeetech.com> # on CU1830-neo/X1830
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When a clock is declared as both CGU_CLK_DIV and CGU_CLK_MUX, the CGU
code expects the mux to be applied first, the divider second.
On the JZ4760, and maybe on some other SoCs, some clocks also have a mux
setting and a divider, but the divider is not applied to all parents
selectable from the mux.
This could be solved by creating two clocks, one with CGU_CLK_DIV and
one with CGU_CLK_MUX, but that would increase the number of clocks.
Instead, add a 8-bit mask to CGU_CLK_DIV clocks. If the bit
corresponding to the parent clock's index is set, the divider is
bypassed.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20210530164923.18134-3-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Caught this when looking at alpha-pll code. Untested but it is clear that
this was intended to write to PLL_CAL_L_VAL and not PLL_ALPHA_VAL.
Fixes: 691865bad6 ("clk: qcom: clk-alpha-pll: Add support for Fabia PLL calibration")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210609022852.4151-1-jonathan@marek.ca
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Biju Das
Linus Torvalds
Stephen Boyd
Andy Shevchenko
Martin Blumenstingl
Damien Le Moal
Colin Ian King
Wang Hai
Rajan Vaja
Gabriel Fernandez
Dongjiu Geng
Robert Hancock
Yu Jiahua
Alain Volmat
Paul Cercueil
Jonathan Marek