A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the end
of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing legacy
mach/* include dependencies and moving platform detection/config to
drivers/soc. Also some updates/cleanup of platform data.
- Core power domain support for Tegra platforms, and some improvements
in build test coverage by adding stubs for compile test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI) SMP
support on i.MX7D, SoC ID setup for i.MX50, removal of platform data
and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip.
-----BEGIN PGP SIGNATURE-----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=b6Jo
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
Pull crypto fixes from Herbert Xu:
- Regression fix in drbg due to missing self-test for new default
algorithm
- Add ratelimit on user-triggerable message in qat
- Fix build failure due to missing dependency in sl3516
- Remove obsolete PageSlab checks
- Fix bogus hardware register writes on Kunpeng920 in hisilicon/sec
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon/sec - fix the process of disabling sva prefetching
crypto: sl3516 - Add dependency on ARCH_GEMINI
crypto: sl3516 - Typo s/Stormlink/Storlink/
crypto: drbg - self test for HMAC(SHA-512)
crypto: omap - Drop obsolete PageSlab check
crypto: scatterwalk - Remove obsolete PageSlab check
crypto: qat - ratelimit invalid ioctl message and print the invalid cmd
- A big series refactoring parts of our KVM code, and converting some to C.
- Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs.
- Support for the Microwatt soft-core.
- Optimisations to our interrupt return path on 64-bit.
- Support for userspace access to the NX GZIP accelerator on PowerVM on Power10.
- Enable KUAP and KUEP by default on 32-bit Book3S CPUs.
- Other smaller features, fixes & cleanups.
Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li,
Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique
Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley,
Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun
Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain,
YueHaibing, Zhang Jianhua, Zhen Lei.
-----BEGIN PGP SIGNATURE-----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=zo4d
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A big series refactoring parts of our KVM code, and converting some
to C.
- Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on
some CPUs.
- Support for the Microwatt soft-core.
- Optimisations to our interrupt return path on 64-bit.
- Support for userspace access to the NX GZIP accelerator on PowerVM on
Power10.
- Enable KUAP and KUEP by default on 32-bit Book3S CPUs.
- Other smaller features, fixes & cleanups.
Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe
Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand,
Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe,
Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika
Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar
Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei.
* tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits)
powerpc: Only build restart_table.c for 64s
powerpc/64s: move ret_from_fork etc above __end_soft_masked
powerpc/64s/interrupt: clean up interrupt return labels
powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
powerpc/64: enable MSR[EE] in irq replay pt_regs
powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
powerpc/64s: add a table of implicit soft-masked addresses
powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
powerpc/64e: fix CONFIG_RELOCATABLE build warnings
powerpc/64s: fix hash page fault interrupt handler
powerpc/4xx: Fix setup_kuep() on SMP
powerpc/32s: Fix setup_{kuap/kuep}() on SMP
powerpc/interrupt: Use names in check_return_regs_valid()
powerpc/interrupt: Also use exit_must_hard_disable() on PPC32
powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE
powerpc/ptrace: Refactor regs_set_return_{msr/ip}
powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip}
powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
powerpc/pseries/vas: Include irqdomain.h
powerpc: mark local variables around longjmp as volatile
...
The open interface of the sva prefetching function is distinguish the chip
version. But the close interface of the sva prefetching function doesn't
distinguish the chip version. As a result, the sva prefetching close
operation is also performed on Kunpeng920, those registers are important
on Kunpeng920, which eventually leads to abnormal hardware problems. So
need to fix it immediately.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Storlink SL3516 crypto engine is only present on Storlink
Semiconductor/Storm Semiconductor/Cortina Systems Gemini SoCs.
Hence add a dependency on ARCH_GEMINI, to prevent asking the user about
this driver when configuring a kernel without Gemini support.
While at it, group the dependencies.
Fixes: 46c5338db7 ("crypto: sl3516 - Add sl3516 crypto engine")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to Documentation/devicetree/bindings/arm/gemini.txt, the
company was originally named "Storlink Semiconductor", and later renamed
to "Storm Semiconductor".
Fixes: 46c5338db7 ("crypto: sl3516 - Add sl3516 crypto engine")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As it is now legal to call flush_dcache_page on slab pages we
no longer need to do the check in the omap driver. This patch
also uses flush_dcache_page instead of flush_kernel_dcache_page
because the page we're writing to could be anything.
Reported-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently incorrect QAT ioctls can spam the kernel log with error messages
of the form "QAT: Invalid ioctl" if a userspace program uses the wrong
ioctl command. Quench the messages by ratelimiting them and also print
the invalid command being used as that is useful to know.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The sl3516 driver need to depend on HAS_IOMEM.
This fixes a build error:
ERROR: modpost: "devm_platform_ioremap_resource" [drivers/crypto/gemini/sl3516-ce.ko] undefined!
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds a function hisi_qm_is_q_updated to
check if the task is ready in hardware queue when
user polls an UACCE queue.This prevents users from
repeatedly querying whether the accelerator has
completed tasks, which wastes CPU resources.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
drivers/crypto/gemini/sl3516-ce-core.c:345:12:
warning: ‘sl3516_ce_pm_resume’ defined but not used [-Wunused-function]
static int sl3516_ce_pm_resume(struct device *dev)
^~~~~~~~~~~~~~~~~~~
The driver needs PM, otherwise clock and resets are never set.
So make it depends on PM to fix this warning.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Suggested-by: LABBE Corentin <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The nx driver started out its life as a BE-only driver. However,
somewhere along the way LE support was partially added. This never
seems to have been extended all the way but it does trigger numerous
warnings during build.
This patch fixes all those warnings, but it doesn't mean that the
driver will work on LE.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function nx842_OF_upd_status triggers a sparse RCU warning when
it directly dereferences the RCU-protected devdata. This appears
to be an accident as there was another variable of the same name
that was passed in from the caller.
After it was removed (because the main purpose of using it, to
update the status member was itself removed) the global variable
unintenionally stood in as its replacement.
This patch restores the devdata parameter.
Fixes: 90fd73f912 ("crypto: nx - remove pSeries NX 'status' field")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch removes the unused auth_len variable from
sa_aead_dma_in_callback.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
drivers/crypto/gemini/sl3516-ce-cipher.c: linux/io.h is included more than once.
Generated by: scripts/checkincludes.pl
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Fist we move some registers around to make room for
the predetermined PCI I/O space.
- Then we add some Kconfig options to make it possible
to use the old PCI driver in parallell with the new
shiny one.
- Then we add the new PCI driver and some bindings for
it.
- On top of this we add an (ages old) patch from Arnd
that centralize the CPU/SoC detection in drivers/soc
and make the header a standard Linux header to avoid
the <mach/*> business in drivers.
- Then we split out and modernize some platform data
headers for pata, and hwrandom, and top it up with
DT bindings and support for hwrandom.
-----BEGIN PGP SIGNATURE-----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=k/Rp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAmDT5DwPHG9sb2ZAbGl4
b20ubmV0AAoJEIwa5zzehBx3fJ0P/3R3Eyxo7W+sUZzDDkVuHIGQ+D2Yj2SLsNF+
hCoXlADnD37Zgjw4hEp3nW3ZuoRDH2MqhU//oMFfUScXh0giHbjaSsQRQextoo3u
kqReKRrhU7r9KSuAloml8YXTCiBCYkHEQQ7BtMuInyJRYmIlBSUV9GpiMXGY4MOO
Z4orN5OGio4S9VZ3hvN5efKJnqjbKvKzgXDGaHuXqEHFXpXX9gH8g/eulxOcUZ8f
tfTdW026isqBpW1pGpEqKcyyT4TJmCs1JDx19DHjbaeVAV9vOvS2UF7xC+6nYGEA
7PQwRMxZGMdSP/YZ8HsbHKoAHh3/3rwc0BpjlnQcnW/2l52sQM4hrbsd0vjL7zap
S7qTIlPWEK0glbFQccXVtwmfDauE7G6GxuuAe4+zO4zNeiJyxH9UwXiNvKsRGzSi
E1sWSAEy8h8HOvxg4D0am7n/57QYdJLtfvOxgBtmmyx5FnVj64LYtKXSb4k345cn
qAbYb/vKJauze046Hll8dxK6JsRuzpjUy/10Q3UnXw580GeNFcHRRGBzDNFKZynZ
YlTfd/njEr+qjQA2hE9LxshA/R6M+OyskHuNvGCZ9bPFhbJzTBxfdAPwVqjs6G0h
BEL90S6KiURnyEsnYzmHV6nVn5reggIXCdcmPtcCHan+jw4pJ5e/op/dZPytf2Uf
Z0iZ4QiN
=NWGE
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-arm-soc-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/soc
This is a major chunk of IXP4xx modernization:
- Fist we move some registers around to make room for
the predetermined PCI I/O space.
- Then we add some Kconfig options to make it possible
to use the old PCI driver in parallell with the new
shiny one.
- Then we add the new PCI driver and some bindings for
it.
- On top of this we add an (ages old) patch from Arnd
that centralize the CPU/SoC detection in drivers/soc
and make the header a standard Linux header to avoid
the <mach/*> business in drivers.
- Then we split out and modernize some platform data
headers for pata, and hwrandom, and top it up with
DT bindings and support for hwrandom.
* tag 'ixp4xx-arm-soc-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
Link: https://lore.kernel.org/r/CACRpkdbw6HSpp7k6q1FYGmtafLmdAu8bFnpHQOdfBDYYsdLbkw@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
The user space uses /dev/crypto/nx-gzip interface to setup VAS
windows, create paste mapping and close windows. This patch adds
changes to create/remove this interface with VAS register/unregister
functions on PowerVM platform.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/121ea1f4eb3004f3b8f4fe8abefaecc88b292efd.camel@linux.ibm.com
Export NX-GZIP capabilities to usrespace in sysfs
/sys/devices/vio/ibm,compression-v1/nx_gzip_caps directory.
These are queried by userspace accelerator libraries to set
minimum length heuristics and maximum limits on request sizes.
NX-GZIP capabilities:
min_compress_len /*Recommended minimum compress length in bytes*/
min_decompress_len /*Recommended minimum decompress length in bytes*/
req_max_processed_len /* Maximum number of bytes processed in one
request */
NX will return RMA_Reject if the request buffer size is greater
than req_max_processed_len.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/510da86abbd904878d5f13d74aba72603c37d783.camel@linux.ibm.com
The hypervisor provides different NX capabilities that it
supports. These capabilities such as recommended minimum
compression / decompression lengths and the maximum request
buffer size in bytes are used to define the user space NX
request.
NX will reject the request if the buffer size is more than
the maximum buffer size. Whereas compression / decompression
lengths are recommended values for better performance.
Changes to get NX overall capabilities which points to the
specific features that the hypervisor supports. Then retrieve
the capabilities for the specific feature (available only
for NXGZIP).
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f2b6a1fb8b6112595a73d81c67a35af4e7f5d0a3.camel@linux.ibm.com
Rename nx-842-pseries.c to nx-common-pseries.c to add code for new
GZIP compression type. The actual functionality is not changed in
this patch.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1fcf672209a14ea8944bd3e49c8a7381c8f450f8.camel@linux.ibm.com
powerNV and pseries drivers register / unregister to the corresponding
platform specific VAS separately. Then these VAS functions call the
common API with the specific window operations. So rename powerNV VAS
API register/unregister functions.
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9db00d58dbdcb7cfc07a1df95f3d2a9e3e5d746a.camel@linux.ibm.com
Generic drivers are unable to use the feature macros from mach/cpu.h
or the feature bits from mach/hardware.h, so move these into a global
header file along with some dummy helpers that list these features as
disabled elsewhere.
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Cc: Raylynn Knight <rayknight@me.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The ZIP driver support configure each function's QoS in the Host
for Kunpeng930. The ZIP driver needs to configure the maximum shaper
type rate.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The HPRE driver support configure each function's QoS in the Host
for Kunpeng930. The HPRE driver needs to configure the maximum shaper
type rate.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SEC driver support configure each function's QoS in the Host
for Kunpeng930. The SEC driver needs to configure the maximum shaper
type rate.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. The ACC driver supports to inquiry each function's QoS in the Host
and VM. The driver supports reading QoS by the device debug SysFS
attribute file "alg_qos", like "cat alg_qos".
2. Modify the communication process between pf and vf as needed.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to the function communication, add pf ping single
vf function to be used in the vf read QoS.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Merges the work initialization process into a single function from
qm initialization.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Just move the code as needed.
2. Add the "alg_qos" file node in the qm debug sysfs.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on the Token bucket algorithm. The HAC driver supports to configure
each function's QoS in the host. The driver supports writing QoS by the
debugfs node that named "alg_qos". The qos value is 1~1000.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using list_move_tail() instead of list_del() + list_add_tail() in ccp-dmaengine.c.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If an error occurs after a successful 'ioremap()' call, it must be undone
by a corresponding 'iounmap()' call, as already done in the remove
function.
Add a 'pf_sw_fail' label in the error handling path and add the missing
'iounmap()'.
While at it, also add a 'flr_fail' label in the error handling path and use
it to avoid some code duplication.
Fixes: 14fa93cdcd ("crypto: cavium - Add support for CNN55XX adapters.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Modify the SEC request structure, combines two common parameters of the
SEC request into one parameter.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use hardware integrity check value process instead of soft verify
process when doing aead decryption.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add fallback tfm supporting for hisi_sec driver. Due to the Kunpeng920's
CCM/GCM algorithm not supports 0 byte src length. So the driver needs to
setting the soft fallback aead tfm.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add new algorithm mode for AEAD:
CCM(AES), GCM(AES), CCM(SM4), GCM(SM4).
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 1339a7c3ba ("crypto: qce: skcipher: Fix incorrect sg count for dma transfers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cortina/gemini SL3516 SoC has a crypto IP name either (crypto
engine/crypto acceleration engine in the datasheet).
It support many algorithms like [AES|DES|3DES][ECB|CBC], SHA1, MD5 and
some HMAC.
This patch adds the core files and support for ecb(aes) and the RNG.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes: 604c31039d ("crypto: omap-sham - Check for return value from pm_runtime_get_sync")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Function nitrox_register_interrupts leaves variable 'nr_vecs' unchecked, which
would be use as kcalloc parameter later.
Fixes: 5155e118dd ("crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch updates the reset flow based on PF/VF communications. VFs
will be stopped after receiving reset message from PF, and wait for
reset finish to restart VFs.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds 'ping_all_vfs' callback that supports pf send message to
all vfs and 'ping_pf' callback that supports vf send message to pf. After
receiving the interrupt, the communication destination gets the message
by sending mailbox.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 hardware supports the communication between PF and VFs.
This patch enables communication between PF and VFs by writing hardware
registers, and requests an irq for communication.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kunpeng930 hardware supports PF/VF communications. When the device is
reset, PF can send message to VF to stop function and restart function.
This patch adjusts the reset interface to support sending message through
PF/VF communication.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The result of gx modulo p is zero if gx is equal to p, so return
error immediately if gx is equal to p.
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Linus Torvalds
Kai Ye
Geert Uytterhoeven
Herbert Xu
Colin Ian King
Corentin Labbe
Wenkai Lin
YueHaibing
Kees Cook
kernel test robot
Olof Johansson
Haren Myneni
Arnd Bergmann
Baokun Li
Tom Rix
Christophe JAILLET
Wei Yongjun
Zhang Qilong
Tong Tiangen
Weili Qian
Hui Tang