This patch corrects the control type of the additional AE-5 controls
added in a previous patch from HDA_INPUT to HDA_OUTPUT.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds controls for the AE-5's headphone gain setting, and the
DAC's interpolation filter setting.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the input selection commands for the Sound BlasterX
AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up ca0132_alt_out_select by moving the card specific
output commands into a separate function. As more cards are added, the
function ca0132_alt_out_select is going to get more bloated with these,
so moving into a separate function tries to keep that from happening.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up some of the formatting of the post-dsp load setup
functions, and also merges some of the sub functions into individual
ones.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Recon3D, AE-5, Z and ZxR all share the same firmware file. Rename
this from the specific "ctefx-sbz.bin" to "ctefx-desktop.bin" and set
the AE-5 and Recon3D to use it as well.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds AE-5 specific stuff to the ca0132_alt_init function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds AE-5 pre-init functions that happen before the main
ca0132_alt_init, and gives functions related to the ca0113 a ca0113
prefix instead of ca0132. It also adds functions to write to the 8051's
SFRs, and to write the special ca0113 commands for the AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the unique writes for the AE-5 on startup to
ca0132_mmio_init. The other cards share some addresses written to, but
use different values.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch sets the bool values for the AE-5, as well as selects the
mixer it will use.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the pincfg for the Sound BlasterX AE-5, and cleans up
the function it's assigned in.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the PCI subsys ID quirk for the Sound BlasterX AE-5.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch defines some new verbs found from reverse engineering of the
onboard 8051 CPU, and a control param found there as well. This clears
up usage of these verbs in other parts of the driver, and removes their
usage where they're now known to be unnecessary.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds exit functions for the Recon3D, and cleans up the
current exit function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds commands to the alternative input and output select
commands to support the Recon3D.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Recon3D can use many of the same functions as the Recon3Di, so many
of the r3di prefix function remain the same, but change their names to
the more generic r3d prefix. This patch does this, and adds quirk checks
for things specific to the Recon3Di.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds functions for Recon3D startup, and sets values for
things such as use_pci_mmio. It also renames some functions and tables
from the sbz prefix into ca0132, as the Recon3D uses them as well.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the ability to choose whether or not to map the pci
region2, which is used for things such as GPIO on the Recon3D and Sound
Blaster Z.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds pin configs from the Recon3D, taken from the Window's
driver.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the PCI subsys ID for the Recon3D that has been tested,
and adds the QUIRK_R3D enumeration.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch fixes a previous oversight where the microphone unsolicited
response would use the wrong input selection function.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch cleans up ca0132_init by removing unnecessary commands and
ordering things better.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds a new function, ca0132_mmio_gpio_set, to clear up what
is going on with writes to mmio region 0x320.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use NULL for initializing the snd_kcontrol_new.tlv field, instead of
0, as warned by sparse:
sound/pci/hda/patch_ca0132.c:5519:22: warning: Using plain integer as NULL pointer
Also, the driver does the same initialization twice, once for
knew.tlv.c and another for knew.tlv.p while both point to the same
address (these are union). Drop the latter superfluous one.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The PCI subsystem in question for this quirk rule has been
identified as a Gigabyte GA-Z170X-Gaming 7 motherboard. Set the
device name appropriately.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Reviewed-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
These motherboards have Sound Core3D and apparently "support"
Recon3Di. Added to the quirk list as QUIRK_R3DI.
Issue report, PCI Subsystem ID, and testing by a contributor on
IRC who wished to remain anonymous.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Reviewed-by: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The array ca0132_alt_chmaps is local to the source and does not
need to be in global scope, so make it static.
Cleans up sparse warning:
warning: symbol 'ca0132_alt_chmaps' was not declared. Should it be
static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The commentary says to use various parameters, and lays out what
the mapping is... The code used a 32KHz rate when the comment
says that it needs to use a 48KHz rate. And this has been the
case since day one.
On the Alienware M17x R4, the DMic used to have exceptionally quiet
pickup and a lot of noise. Changing the data rate fixes both of
these issues.
Searching the kernel bug tracker for ca0132-related issues shows no
mention of this being an issue for other hardware, and I have no
other hardware to test with, so a quirk is used to limit the effect
to just the M17x R4.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 009b8f979b conditionalized
adding the "CA0132 Analog Mic-In2" PCM with a comment to the
effect that, "desktops don't use this ADC", but the test was set
up such that the ADC was only created for desktops. Invert the
test.
Fixes: 009b8f979b ("ALSA: hda/ca0132: update core functions for sbz + r3di")
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
QUIRK_NONE is, quite explicitly, the default case. The entire
point of a quirks system is to allow "programming by difference"
from a given base case, which requires that merely defining a new
quirk for some piece of hardware should not change the behavior of
the driver for that hardware. In turn, this means that testing
for QUIRK_NONE explicitly is a violation of that implicit contract.
Change a test for QUIRK_NONE and QUIRK_ALIENWARE to default, and
add a test for QUIRK_SBZ to disable the default behavior in that
instance.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit e93ac30a32 (ALSA: HDA/ca0132:
add extra init functions for r3di + sbz) introduced an extra
initialization function that was improperly guarded, taking effect
on systems with QUIRK_ALIENWARE, even though such systems were
supposedly not affected.
It may be that this piece of initialization should be done for all
systems, but that's not a call that I can make.
Fixes: e93ac30a32 ("ALSA: HDA/ca0132: add extra init functions for r3di + sbz")
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
During ca0132_init(), ca0132_init_unsol() is run before the
spec->spec_init_verbs are written. ca0132_init_unsol() calls
snd_hda_jack_detect_enable_callback(), which requests UNSOL events
for three or four nodes, two of which were also (redundantly)
requested by spec_init_verbs.
Kill the redundant AC_VERB_SET_UNSOLICITED_ENABLE verbs.
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ca0132_config() was setting some values in the auto_pin_cfg for
the codec... but it is called prior to snd_hda_parse_pin_defcfg(),
which does a memset() to clear the entire structure as one of its
first actions, making the entire exercise pointless.
Kill all use of struct auto_pin_cfg from ca0132_config().
Signed-off-by: Alastair Bridgewater <alastair.bridgewater@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This module has a table for parameters of each effects. This table is
read-only and can have 'const' qualifier.
This commit adds this optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This module has some function-local strings just for printk therefore
it can be merged into format string.
This commit applies this optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This module has some strings just for printk therefore they can be
read-only.
This commit applies this optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An array of templates for control element set is passed as an
argument for snd_hda_add_new_ctls(). This argument has 'const'
qualifier therefore the passed array can have the qualifier.
This commit adds this optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
sound/pci/hda/patch_ca0132.c:5062:50-51: WARNING: Use ARRAY_SIZE
sound/pci/hda/patch_ca0132.c:5092:50-51: WARNING: Use ARRAY_SIZE
Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element
Semantic patch information:
This makes an effort to find cases where ARRAY_SIZE can be used such as
where there is a division of sizeof the array by the sizeof its first
element or by any indexed element or the element type. It replaces the
division of the two sizeofs by ARRAY_SIZE.
Generated by: scripts/coccinelle/misc/array_size.cocci
Fixes: 47cdf76e44 ("ALSA: hda/ca0132: Add new control changes for SBZ + R3Di")
CC: Connor McAdams <conmanx360@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds new controls to set the effect levels on the R3Di and
SBZ. It also adds vmaster controls to control all surround sound
channels. So that Surround effect switch doesn't conflict with Surround
volume, FX: prefix added to all effect related switches.
Tested-by: Mariusz Ceier <mceier+kernel@gmail.com>
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add function to set vipsource on cards that use_alt_controls. Different
sequence. Also, add cvoice_switch_set at end of ca0132_select_in so that
when switching between inputs cvoice state is maintained.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds lookup table for floating point decibel volume, and new functions
to allow for setting the decibel level on the DSP.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds the ability to change the src_id on scp commands, which
is used in the dsp setup of the Recon3Di and the Sound Blaster Z. It
also makes sure to maintain backwards compatibility with the older
dspio_set_uint_param function, and sets it's src to the default 0x20.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Adds dsp setup functions for Recon3Di as well as the GPIO functions
specific to it.
Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Connor McAdams
Pierre-Louis Bossart
Takashi Iwai
Alastair Bridgewater
Colin Ian King
Kees Cook
Takashi Sakamoto
Fengguang Wu