This patch adds a function named setup_new_flex_group_blocks() which
sets up group blocks of a flex bg.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
ext4_{set,clear}_bit() is defined as __test_and_{set,clear}_bit_le() for
ext4. Only two ext4_{set,clear}_bit() calls check the return value. The
rest of calls ignore the return value and they can be replaced with
__{set,clear}_bit_le().
This changes ext4_{set,clear}_bit() from __test_and_{set,clear}_bit_le()
to __{set,clear}_bit_le() and introduces ext4_test_and_{set,clear}_bit()
for the two places where old bit needs to be returned.
This ext4_{set,clear}_bit() change is considered safe, because if someone
uses these macros without noticing the change, new ext4_{set,clear}_bit
don't have return value and causes compiler errors where the return value
is used.
This also removes unused ext4_find_first_zero_bit().
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The functions ext4_block_truncate_page() and ext4_block_zero_page_range()
are no longer used, so remove them.
Signed-off-by: Zheng Liu <wenqing.lz@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (97 commits)
jbd2: Unify log messages in jbd2 code
jbd/jbd2: validate sb->s_first in journal_get_superblock()
ext4: let ext4_ext_rm_leaf work with EXT_DEBUG defined
ext4: fix a syntax error in ext4_ext_insert_extent when debugging enabled
ext4: fix a typo in struct ext4_allocation_context
ext4: Don't normalize an falloc request if it can fit in 1 extent.
ext4: remove comments about extent mount option in ext4_new_inode()
ext4: let ext4_discard_partial_buffers handle unaligned range correctly
ext4: return ENOMEM if find_or_create_pages fails
ext4: move vars to local scope in ext4_discard_partial_page_buffers_no_lock()
ext4: Create helper function for EXT4_IO_END_UNWRITTEN and i_aiodio_unwritten
ext4: optimize locking for end_io extent conversion
ext4: remove unnecessary call to waitqueue_active()
ext4: Use correct locking for ext4_end_io_nolock()
ext4: fix race in xattr block allocation path
ext4: trace punch_hole correctly in ext4_ext_map_blocks
ext4: clean up AGGRESSIVE_TEST code
ext4: move variables to their scope
ext4: fix quota accounting during migration
ext4: migrate cleanup
...
EXT4_IO_END_UNWRITTEN flag set and the increase of i_aiodio_unwritten
should be done simultaneously since ext4_end_io_nolock always clear
the flag and decrease the counter in the same time.
We have found some bugs that the flag is set while leaving
i_aiodio_unwritten unchanged(commit 32c80b32c0). So this patch just tries
to create a helper function to wrap them to avoid any future bug.
The idea is inspired by Eric.
Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The tmp_inode should have same uid/gid as the original inode.
Otherwise new metadata blocks will be accounted to wrong quota-id,
which will result in a quota leak after the inode migration is
completed.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
EOFBLOCK_FL should be updated if called w/o FALLOCATE_FL_KEEP_SIZE
Currently it happens only if new extent was allocated.
TESTCASE:
fallocate test_file -n -l4096
fallocate test_file -l4096
Last fallocate cmd has updated size, but keept EOFBLOCK_FL set. And
fsck will complain about that.
Also remove ping pong in ext4_fallocate() in case of new extents,
where ext4_ext_map_blocks() clear EOFBLOCKS bit, and later
ext4_falloc_update_inode() restore it again.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are no users of the EXT4_IOC_WAIT_FOR_READONLY ioctl, and it is
also broken. No one sets the set_ro_timer, no one wakes up us and our
state is set to TASK_INTERRUPTIBLE not RUNNING. So remove it.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
For a long time now orlov is the default block allocator in the
ext4. It performs better than the old one and no one seems to claim
otherwise so we can safely drop it and make oldalloc and orlov mount
option deprecated.
This is a part of the effort to reduce number of ext4 options hence the
test matrix.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently, there exists a race between delayed allocated writes and
the writeback when bigalloc feature is in use. The race was because we
wanted to determine what blocks in a cluster are under delayed
allocation and we were using buffer_delayed(bh) check for it. But, the
writeback codepath clears this bit without any synchronization which
resulted in a race and an ext4 warning similar to:
EXT4-fs (ram1): ext4_da_update_reserve_space: ino 13, used 1 with only 0
reserved data blocks
The race existed in two places.
(1) between ext4_find_delalloc_range() and ext4_map_blocks() when called from
writeback code path.
(2) between ext4_find_delalloc_range() and ext4_da_get_block_prep() (where
buffer_delayed(bh) is set.
To fix (1), this patch introduces a new buffer_head state bit -
BH_Da_Mapped. This bit is set under the protection of
EXT4_I(inode)->i_data_sem when we have actually mapped the delayed
allocated blocks during the writeout time. We can now reliably check
for this bit inside ext4_find_delalloc_range() to determine whether
the reservation for the blocks have already been claimed or not.
To fix (2), it was necessary to set buffer_delay(bh) under the
protection of i_data_sem. So, I extracted the very beginning of
ext4_map_blocks into a new function - ext4_da_map_blocks() - and
performed the required setting of bh_delay bit and the quota
reservation under the protection of i_data_sem. These two fixes makes
the checking of buffer_delay(bh) and buffer_da_mapped(bh) consistent,
thus removing the race.
Tested: I was able to reproduce the problem by running 'dd' and
'fsync' in parallel. Also, xfstests sometimes used to reproduce this
race. After the fix both my test and xfstests were successful and no
race (warning message) was observed.
Google-Bug-Id: 4997027
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds some tracepoints in ext4/extents.c and updates a tracepoint in
ext4/inode.c.
Tested: Built and ran the kernel and verified that these tracepoints work.
Also ran xfstests.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Rename the function so it is more clear what is going on. Also rename
the various variables so it's clearer what's happening.
Also fix a missing blocks to cluster conversion when reading the
number of reserved blocks for root.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This function really claims a number of free clusters, not blocks, so
rename it so it's clearer what's going on.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This function really returns the number of clusters after initializing
an uninitalized block bitmap has been initialized.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This function really counts the free clusters reported in the block
group descriptors, so rename it to reduce confusion.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The field bg_free_blocks_count_{lo,high} in the block group
descriptor has been repurposed to hold the number of free clusters for
bigalloc functions. So rename the functions so it makes it easier to
read and audit the block allocation and block freeing code.
Note: at this point in bigalloc development we doesn't support
online resize, so this also makes it really obvious all of the places
we need to fix up to add support for online resize.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With bigalloc changes, the i_blocks value was not correctly set (it was still
set to number of blocks being used, but in case of bigalloc, we want i_blocks
to represent the number of clusters being used). Since the quota subsystem sets
the i_blocks value, this patch fixes the quota accounting and makes sure that
the i_blocks value is set correctly.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Convert the free_blocks to be free_clusters to make the final revised
bigalloc changes easier to read/understand.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Convert the percpu counters s_dirtyblocks_counter and
s_freeblocks_counter in struct ext4_super_info to be
s_dirtyclusters_counter and s_freeclusters_counter.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The ext4_free_blocks() function now has two new flags that indicate
whether a partial cluster at the beginning or the end of the block
extents should be freed or not. That will be up the caller (i.e.,
truncate), who can figure out whether partial clusters at the
beginning or the end of a block range can be freed.
We also have to update the ext4_mb_free_metadata() and
release_blocks_on_commit() machinery to be cluster-based, since it is
used by ext4_free_blocks().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function ext4_free_blocks_after_init() used to be a #define of
ext4_init_block_bitmap(). This actually made it difficult to
understand how the function worked, and made it hard make changes to
support clusters. So as an initial cleanup, I've separated out the
functionality of initializing block bitmap from calculating the number
of free blocks in the new block group.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This adds supports for bigalloc file systems. It teaches the mount
code just enough about bigalloc superblock fields that it will mount
the file system without freaking out that the number of blocks per
group is too big.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the user explicitly specifies conflicting mount options for
delalloc or dioread_nolock and data=journal, fail the mount, instead
of printing a warning and continuing (since many user's won't look at
dmesg and notice the warning).
Also, print a single warning that data=journal implies that delayed
allocation is not on by default (since it's not supported), and
furthermore that O_DIRECT is not supported. Improve the text in
Documentation/filesystems/ext4.txt so this is clear there as well.
Similarly, if the dioread_nolock mount option is specified when the
file system block size != PAGE_SIZE, fail the mount instead of
printing a warning message and ignoring the mount option.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds two new routines: ext4_discard_partial_page_buffers
and ext4_discard_partial_page_buffers_no_lock.
The ext4_discard_partial_page_buffers routine is a wrapper
function to ext4_discard_partial_page_buffers_no_lock.
The wrapper function locks the page and passes it to
ext4_discard_partial_page_buffers_no_lock.
Calling functions that already have the page locked can call
ext4_discard_partial_page_buffers_no_lock directly.
The ext4_discard_partial_page_buffers_no_lock function
zeros a specified range in a page, and unmaps the
corresponding buffer heads. Only block aligned regions of the
page will have their buffer heads unmapped. Unblock aligned regions
will be mapped if needed so that they can be updated with the
partial zero out. This function is meant to
be used to update a page and its buffer heads to be zeroed
and unmapped when the corresponding blocks have been released
or will be released.
This routine is used in the following scenarios:
* A hole is punched and the non page aligned regions
of the head and tail of the hole need to be discarded
* The file is truncated and the partial page beyond EOF needs
to be discarded
* The end of a hole is in the same page as EOF. After the
page is flushed, the partial page beyond EOF needs to be
discarded.
* A write operation begins or ends inside a hole and the partial
page appearing before or after the write needs to be discarded
* A write operation extends EOF and the partial page beyond EOF
needs to be discarded
This function takes a flag EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED
which is used when a write operation begins or ends in a hole.
When the EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED flag is used, only
buffer heads that are already unmapped will have the corresponding
regions of the page zeroed.
Signed-off-by: Allison Henderson <achender@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This doesn't make much sense, and it exposes a bug in the kernel where
attempts to create a new file in an append-only directory using
O_CREAT will fail (but still leave a zero-length file). This was
discovered when xfstests #79 was generalized so it could run on all
file systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc:stable@kernel.org
The i_mutex lock and flush_completed_IO() added by commit 2581fdc810
in ext4_evict_inode() causes lockdep complaining about potential
deadlock in several places. In most/all of these LOCKDEP complaints
it looks like it's a false positive, since many of the potential
circular locking cases can't take place by the time the
ext4_evict_inode() is called; but since at the very least it may mask
real problems, we need to address this.
This change removes the flush_completed_IO() and i_mutex lock in
ext4_evict_inode(). Instead, we take a different approach to resolve
the software lockup that commit 2581fdc810 intends to fix. Rather
than having ext4-dio-unwritten thread wait for grabing the i_mutex
lock of an inode, we use mutex_trylock() instead, and simply requeue
the work item if we fail to grab the inode's i_mutex lock.
This should speed up work queue processing in general and also
prevents the following deadlock scenario: During page fault,
shrink_icache_memory is called that in turn evicts another inode B.
Inode B has some pending io_end work so it calls ext4_ioend_wait()
that waits for inode B's i_ioend_count to become zero. However, inode
B's ioend work was queued behind some of inode A's ioend work on the
same cpu's ext4-dio-unwritten workqueue. As the ext4-dio-unwritten
thread on that cpu is processing inode A's ioend work, it tries to
grab inode A's i_mutex lock. Since the i_mutex lock of inode A is
still hold before the page fault happened, we enter a deadlock.
Signed-off-by: Jiaying Zhang <jiayingz@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits)
ext4: prevent memory leaks from ext4_mb_init_backend() on error path
ext4: use EXT4_BAD_INO for buddy cache to avoid colliding with valid inode #
ext4: use ext4_msg() instead of printk in mballoc
ext4: use ext4_kvzalloc()/ext4_kvmalloc() for s_group_desc and s_group_info
ext4: introduce ext4_kvmalloc(), ext4_kzalloc(), and ext4_kvfree()
ext4: use the correct error exit path in ext4_init_inode_table()
ext4: add missing kfree() on error return path in add_new_gdb()
ext4: change umode_t in tracepoint headers to be an explicit __u16
ext4: fix races in ext4_sync_parent()
ext4: Fix overflow caused by missing cast in ext4_fallocate()
ext4: add action of moving index in ext4_ext_rm_idx for Punch Hole
ext4: simplify parameters of reserve_backup_gdb()
ext4: simplify parameters of add_new_gdb()
ext4: remove lock_buffer in bclean() and setup_new_group_blocks()
ext4: simplify journal handling in setup_new_group_blocks()
ext4: let setup_new_group_blocks() set multiple bits at a time
ext4: fix a typo in ext4_group_extend()
ext4: let ext4_group_add_blocks() handle 0 blocks quickly
ext4: let ext4_group_add_blocks() return an error code
ext4: rename ext4_add_groupblocks() to ext4_group_add_blocks()
...
Fix up conflict in fs/ext4/inode.c: commit aacfc19c62 ("fs: simplify
the blockdev_direct_IO prototype") had changed the ext4_ind_direct_IO()
function for the new simplified calling convention, while commit
dae1e52cb1 ("ext4: move ext4_ind_* functions from inode.c to
indirect.c") moved the function to another file.
Introduce new helper functions which try kmalloc, and then fall back
to vmalloc if necessary, and use them for allocating and deallocating
s_flex_groups.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Rename mb_set_bits() to ext4_set_bits() and make it a global function
so that setup_new_group_blocks() can use it.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch lets ext4_group_add_blocks() return an error code if it
fails, so that upper functions can handle error correctly.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Before this patch, parallel resizers are allowed and protected by a
mutex lock, actually, there is no need to support parallel resizer, so
this patch prevents parallel resizers by atmoic bit ops, like
lock_page() and unlock_page() do.
To do this, the patch removed the mutex lock s_resize_lock from struct
ext4_sb_info and added a unsigned long field named s_resize_flags
which inidicates if there is a resizer.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Btrfs needs to be able to control how filemap_write_and_wait_range() is called
in fsync to make it less of a painful operation, so push down taking i_mutex and
the calling of filemap_write_and_wait() down into the ->fsync() handlers. Some
file systems can drop taking the i_mutex altogether it seems, like ext3 and
ocfs2. For correctness sake I just pushed everything down in all cases to make
sure that we keep the current behavior the same for everybody, and then each
individual fs maintainer can make up their mind about what to do from there.
Thanks,
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In ext4, when FITRIM is called every time, we iterate all the
groups and do trim one by one. It is a bit time wasting if the
group has been trimmed and there is no change since the last
trim.
So this patch adds a new flag in ext4_group_info->bb_state to
indicate that the group has been trimmed, and it will be cleared
if some blocks is freed(in release_blocks_on_commit). Another
trim_minlen is added in ext4_sb_info to record the last minlen
we use to trim the volume, so that if the caller provide a small
one, we will go on the trim regardless of the bb_state.
A simple test with my intel x25m ssd:
df -h shows:
/dev/sdb1 40G 21G 17G 56% /mnt/ext4
Block size: 4096
run the FITRIM with the following parameter:
range.start = 0;
range.len = UINT64_MAX;
range.minlen = 1048576;
without the patch:
[root@boyu-tm linux-2.6]# time ./ftrim /mnt/ext4/a
real 0m5.505s
user 0m0.000s
sys 0m1.224s
[root@boyu-tm linux-2.6]# time ./ftrim /mnt/ext4/a
real 0m5.359s
user 0m0.000s
sys 0m1.178s
[root@boyu-tm linux-2.6]# time ./ftrim /mnt/ext4/a
real 0m5.228s
user 0m0.000s
sys 0m1.151s
with the patch:
[root@boyu-tm linux-2.6]# time ./ftrim /mnt/ext4/a
real 0m5.625s
user 0m0.000s
sys 0m1.269s
[root@boyu-tm linux-2.6]# time ./ftrim /mnt/ext4/a
real 0m0.002s
user 0m0.000s
sys 0m0.001s
[root@boyu-tm linux-2.6]# time ./ftrim /mnt/ext4/a
real 0m0.002s
user 0m0.000s
sys 0m0.001s
A big improvement for the 2nd and 3rd run.
Even after I delete some big image files, it is still much
faster than iterating the whole disk.
[root@boyu-tm test]# time ./ftrim /mnt/ext4/a
real 0m1.217s
user 0m0.000s
sys 0m0.196s
Cc: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The current implementation of ext4_free_blocks() always calls
dquot_free_block This looks quite sensible in the most cases: blocks
to be freed are associated with inode and were accounted in quota and
i_blocks some time ago.
However, there is a case when blocks to free were not accounted by the
time calling ext4_free_blocks() yet:
1. delalloc is on, write_begin pre-allocated some space in quota
2. write-back happens, ext4 allocates some blocks in ext4_ext_map_blocks()
3. then ext4_ext_map_blocks() gets an error (e.g. ENOSPC) from
ext4_ext_insert_extent() and calls ext4_free_blocks().
In this scenario, ext4_free_blocks() calls dquot_free_block() who, in
turn, decrements i_blocks for blocks which were not accounted yet (due
to delalloc) After clean umount, e2fsck reports something like:
> Inode 21, i_blocks is 5080, should be 5128. Fix<y>?
because i_blocks was erroneously decremented as explained above.
The patch fixes the problem by passing the new flag
EXT4_FREE_BLOCKS_NO_QUOT_UPDATE to ext4_free_blocks(), to request
that the dquot_free_block() call be skipped.
Signed-off-by: Maxim Patlasov <maxim.patlasov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
I found that ext4_ext_find_goal() and ext4_find_near()
share the same code for returning a coloured start block
based on i_block_group.
We can refactor this into a common function so that they
don't diverge in the future.
Thanks to adilger for suggesting the new function name.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch moves functions from inode.c to indirect.c.
The moved functions are ext4_ind_* functions and their helpers.
Functions called from inode.c are declared extern.
Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In preparation for moving the indirect functions to a separate file,
move __ext4_check_blockref() to block_validity.c and rename it to
ext4_check_blockref() which is exported as globally visible function.
Also, rename the cpp macro ext4_check_inode_blockref() to
ext4_ind_check_inode(), to make it clear that it is only valid for use
with non-extent mapped inodes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We are about to move all indirect inode functions to a new file.
Before we do that, let's split ext4_ind_truncate() out of ext4_truncate()
leaving only generic code in the latter, so we will be able to move
ext4_ind_truncate() to the new file.
Signed-off-by: Amir Goldstein <amir73il@users.sf.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tell the filesystem if we just updated timestamp (I_DIRTY_SYNC) or
anything else, so that the filesystem can track internally if it
needs to push out a transaction for fdatasync or not.
This is just the prototype change with no user for it yet. I plan
to push large XFS changes for the next merge window, and getting
this trivial infrastructure in this window would help a lot to avoid
tree interdependencies.
Also remove incorrect comments that ->dirty_inode can't block. That
has been changed a long time ago, and many implementations rely on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Currently, an fallocate request of size slightly larger than a power of
2 is turned into two block requests, each a power of 2, with the extra
blocks pre-allocated for future use. When an application calls
fallocate, it already has an idea about how large the file may grow so
there is usually little benefit to reserve extra blocks on the
preallocation list. This reduces disk fragmentation.
Tested: fsstress. Also verified manually that fallocat'ed files are
contiguously laid out with this change (whereas without it they begin at
power-of-2 boundaries, leaving blocks in between). CPU usage of
fallocate is not appreciably higher. In a tight fallocate loop, CPU
usage hovers between 5%-8% with this change, and 5%-7% without it.
Using a simulated file system aging program which the file system to
70%, the percentage of free extents larger than 8MB (as measured by
e2freefrag) increased from 38.8% without this change, to 69.4% with
this change.
Signed-off-by: Vivek Haldar <haldar@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds new routines: "ext4_punch_hole" "ext4_ext_punch_hole"
and "ext4_ext_check_cache"
fallocate has been modified to call ext4_punch_hole when the punch hole
flag is passed. At the moment, we only support punching holes in
extents, so this routine is pretty much a wrapper for the ext4_ext_punch_hole
routine.
The ext4_ext_punch_hole routine first completes all outstanding writes
with the associated pages, and then releases them. The unblock
aligned data is zeroed, and all blocks in between are punched out.
The ext4_ext_check_cache routine is very similar to ext4_ext_in_cache
except it accepts a ext4_ext_cache parameter instead of a ext4_extent
parameter. This routine is used by ext4_ext_punch_hole to check and
see if a block in a hole that has been cached. The ext4_ext_cache
parameter is necessary because the members ext4_extent structure are
not large enough to hold a 32 bit value. The existing
ext4_ext_in_cache routine has become a wrapper to this new function.
[ext4 punch hole patch series 5/5 v7]
Signed-off-by: Allison Henderson <achender@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
This patch modifies the existing ext4_block_truncate_page() function
which was used by the truncate code path, and which zeroes out block
unaligned data, by adding a new length parameter, and renames it to
ext4_block_zero_page_rage(). This function can now be used to zero out the
head of a block, the tail of a block, or the middle
of a block.
The ext4_block_truncate_page() function is now a wrapper to
ext4_block_zero_page_range().
[ext4 punch hole patch series 2/5 v7]
Signed-off-by: Allison Henderson <achender@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
This patch adds an allocation request flag to the ext4_has_free_blocks
function which enables the use of reserved blocks. This will allow a
punch hole to proceed even if the disk is full. Punching a hole may
require additional blocks to first split the extents.
Because ext4_has_free_blocks is a low level function, the flag needs
to be passed down through several functions listed below:
ext4_ext_insert_extent
ext4_ext_create_new_leaf
ext4_ext_grow_indepth
ext4_ext_split
ext4_ext_new_meta_block
ext4_mb_new_blocks
ext4_claim_free_blocks
ext4_has_free_blocks
[ext4 punch hole patch series 1/5 v7]
Signed-off-by: Allison Henderson <achender@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Mingming Cao <cmm@us.ibm.com>
I am working on patch to add quota as a built-in feature for ext4
filesystem. The implementation is based on the design given at
https://ext4.wiki.kernel.org/index.php/Design_For_1st_Class_Quota_in_Ext4.
This patch reserves the inode numbers 3 and 4 for quota purposes and
also reserves EXT4_FEATURE_RO_COMPAT_QUOTA feature code.
Signed-off-by: Aditya Kali <adityakali@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Prevent an ext4 filesystem from being mounted multiple times.
A sequence number is stored on disk and is periodically updated (every 5
seconds by default) by a mounted filesystem.
At mount time, we now wait for s_mmp_update_interval seconds to make sure
that the MMP sequence does not change.
In case of failure, the nodename, bdevname and the time at which the MMP
block was last updated is displayed.
Signed-off-by: Andreas Dilger <adilger@whamcloud.com>
Signed-off-by: Johann Lombardi <johann@whamcloud.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The number of hits and misses for each filesystem is exposed in
/sys/fs/ext4/<dev>/extent_cache_{hits, misses}.
Tested: fsstress, manual checks.
Signed-off-by: Vivek Haldar <haldar@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Yongqiang Yang
Akinobu Mita
Zheng Liu
Linus Torvalds
Joe Perches
Tao Ma
Dmitry Monakhov
Lukas Czerner
Aditya Kali
Theodore Ts'o
Allison Henderson
Jiaying Zhang
Josef Bacik
Maxim Patlasov
Eric Sandeen
Amir Goldstein
Christoph Hellwig
Vivek Haldar
Johann Lombardi