Convert the "seqiv" template to the new way of freeing instances where a
->free() method is installed to the instance struct itself. Also remove
the unused implementation of the old way of freeing instances from the
"echainiv" template, since it's already using the new way too.
In doing this, also simplify the code by making the helper function
aead_geniv_alloc() install the ->free() method, instead of making seqiv
and echainiv do this themselves. This is analogous to how
skcipher_alloc_instance_simple() works.
This will allow removing support for the old way of freeing instances.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support to shash and ahash for the new way of freeing instances
(already used for skcipher, aead, and akcipher) where a ->free() method
is installed to the instance struct itself. These methods are more
strongly-typed than crypto_template::free(), which they replace.
This will allow removing support for the old way of freeing instances.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that crypto_init_spawn() is only called by crypto_grab_spawn(),
simplify things by moving its functionality into crypto_grab_spawn().
In the process of doing this, also be more consistent about when the
spawn and instance are updated, and remove the crypto_spawn::dropref
flag since now it's always set.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all the templates that need ahash spawns have been converted to
use crypto_grab_ahash() rather than look up the algorithm directly,
crypto_ahash_type is no longer used outside of ahash.c. Make it static.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove lots of helper functions that were previously used for
instantiating crypto templates, but are now unused:
- crypto_get_attr_alg() and similar functions looked up an inner
algorithm directly from a template parameter. These were replaced
with getting the algorithm's name, then calling crypto_grab_*().
- crypto_init_spawn2() and similar functions initialized a spawn, given
an algorithm. Similarly, these were replaced with crypto_grab_*().
- crypto_alloc_instance() and similar functions allocated an instance
with a single spawn, given the inner algorithm. These aren't useful
anymore since crypto_grab_*() need the instance allocated first.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all users of single-block cipher spawns have been converted to
use 'struct crypto_cipher_spawn' rather than the less specifically typed
'struct crypto_spawn', make crypto_spawn_cipher() take a pointer to a
'struct crypto_cipher_spawn' rather than a 'struct crypto_spawn'.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the xcbc template use the new function crypto_grab_cipher() to
initialize its cipher spawn.
This is needed to make all spawns be initialized in a consistent way.
This required making xcbc_create() allocate the instance directly rather
than use shash_alloc_instance().
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet, and
by taking advantage of crypto_grab_*() now handling ERR_PTR() names.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the vmac64 template use the new function crypto_grab_cipher() to
initialize its cipher spawn.
This is needed to make all spawns be initialized in a consistent way.
This required making vmac_create() allocate the instance directly rather
than use shash_alloc_instance().
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet, and
by taking advantage of crypto_grab_*() now handling ERR_PTR() names.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the cmac template use the new function crypto_grab_cipher() to
initialize its cipher spawn.
This is needed to make all spawns be initialized in a consistent way.
This required making cmac_create() allocate the instance directly rather
than use shash_alloc_instance().
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet, and
by taking advantage of crypto_grab_*() now handling ERR_PTR() names.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the cbcmac template use the new function crypto_grab_cipher() to
initialize its cipher spawn.
This is needed to make all spawns be initialized in a consistent way.
This required making cbcmac_create() allocate the instance directly
rather than use shash_alloc_instance().
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet, and
by taking advantage of crypto_grab_*() now handling ERR_PTR() names.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make skcipher_alloc_instance_simple() use the new function
crypto_grab_cipher() to initialize its cipher spawn.
This is needed to make all spawns be initialized in a consistent way.
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet, and
by taking advantage of crypto_grab_*() now handling ERR_PTR() names.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the rfc7539 and rfc7539esp templates use the new function
crypto_grab_ahash() to initialize their ahash spawn.
This is needed to make all spawns be initialized in a consistent way.
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet, and
by taking advantage of crypto_grab_*() now handling ERR_PTR() names.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the ccm and ccm_base templates use the new function
crypto_grab_ahash() to initialize their ahash spawn.
This is needed to make all spawns be initialized in a consistent way.
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the gcm and gcm_base templates use the new function
crypto_grab_ahash() to initialize their ahash spawn.
This is needed to make all spawns be initialized in a consistent way.
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the authencesn template use the new function crypto_grab_ahash() to
initialize its ahash spawn.
This is needed to make all spawns be initialized in a consistent way.
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet, and
by taking advantage of crypto_grab_*() now handling ERR_PTR() names.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the authenc template use the new function crypto_grab_ahash() to
initialize its ahash spawn.
This is needed to make all spawns be initialized in a consistent way.
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet, and
by taking advantage of crypto_grab_*() now handling ERR_PTR() names.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the hmac template use the new function crypto_grab_shash() to
initialize its shash spawn.
This is needed to make all spawns be initialized in a consistent way.
This required making hmac_create() allocate the instance directly rather
than use shash_alloc_instance().
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet, and
by taking advantage of crypto_grab_*() now handling ERR_PTR() names.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the cryptd template (in the hash case) use the new function
crypto_grab_shash() to initialize its shash spawn.
This is needed to make all spawns be initialized in a consistent way.
This required making cryptd_create_hash() allocate the instance directly
rather than use cryptd_alloc_instance().
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet, and
by taking advantage of crypto_grab_*() now handling ERR_PTR() names.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the adiantum template use the new functions crypto_grab_cipher()
and crypto_grab_shash() to initialize its cipher and shash spawns.
This is needed to make all spawns be initialized in a consistent way.
Also simplify the error handling by taking advantage of crypto_drop_*()
now accepting (as a no-op) spawns that haven't been initialized yet, and
by taking advantage of crypto_grab_*() now handling ERR_PTR() names.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, ahash spawns are initialized by using ahash_attr_alg() or
crypto_find_alg() to look up the ahash algorithm, then calling
crypto_init_ahash_spawn().
This is different from how skcipher, aead, and akcipher spawns are
initialized (they use crypto_grab_*()), and for no good reason. This
difference introduces unnecessary complexity.
The crypto_grab_*() functions used to have some problems, like not
holding a reference to the algorithm and requiring the caller to
initialize spawn->base.inst. But those problems are fixed now.
So, let's introduce crypto_grab_ahash() so that we can convert all
templates to the same way of initializing their spawns.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, shash spawns are initialized by using shash_attr_alg() or
crypto_alg_mod_lookup() to look up the shash algorithm, then calling
crypto_init_shash_spawn().
This is different from how skcipher, aead, and akcipher spawns are
initialized (they use crypto_grab_*()), and for no good reason. This
difference introduces unnecessary complexity.
The crypto_grab_*() functions used to have some problems, like not
holding a reference to the algorithm and requiring the caller to
initialize spawn->base.inst. But those problems are fixed now.
So, let's introduce crypto_grab_shash() so that we can convert all
templates to the same way of initializing their spawns.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, crypto_spawn::inst is first used temporarily to pass the
instance to crypto_grab_spawn(). Then crypto_init_spawn() overwrites it
with crypto_spawn::next, which shares the same union. Finally,
crypto_spawn::inst is set again when the instance is registered.
Make this less convoluted by just passing the instance as an argument to
crypto_grab_spawn() instead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Initializing a crypto_akcipher_spawn currently requires:
1. Set spawn->base.inst to point to the instance.
2. Call crypto_grab_akcipher().
But there's no reason for these steps to be separate, and in fact this
unneeded complication has caused at least one bug, the one fixed by
commit 6db4341017 ("crypto: adiantum - initialize crypto_spawn::inst")
So just make crypto_grab_akcipher() take the instance as an argument.
To keep the function call from getting too unwieldy due to this extra
argument, also introduce a 'mask' variable into pkcs1pad_create().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Initializing a crypto_aead_spawn currently requires:
1. Set spawn->base.inst to point to the instance.
2. Call crypto_grab_aead().
But there's no reason for these steps to be separate, and in fact this
unneeded complication has caused at least one bug, the one fixed by
commit 6db4341017 ("crypto: adiantum - initialize crypto_spawn::inst")
So just make crypto_grab_aead() take the instance as an argument.
To keep the function calls from getting too unwieldy due to this extra
argument, also introduce a 'mask' variable into the affected places
which weren't already using one.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Initializing a crypto_skcipher_spawn currently requires:
1. Set spawn->base.inst to point to the instance.
2. Call crypto_grab_skcipher().
But there's no reason for these steps to be separate, and in fact this
unneeded complication has caused at least one bug, the one fixed by
commit 6db4341017 ("crypto: adiantum - initialize crypto_spawn::inst")
So just make crypto_grab_skcipher() take the instance as an argument.
To keep the function calls from getting too unwieldy due to this extra
argument, also introduce a 'mask' variable into the affected places
which weren't already using one.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To allow further simplifying template ->create() functions, make
crypto_grab_spawn() handle an ERR_PTR() name by passing back the error.
For most templates, this will allow the result of crypto_attr_alg_name()
to be passed directly to crypto_grab_*(), rather than first having to
assign it to a variable [where it can then potentially be misused, as it
was in the rfc7539 template prior to commit 5e27f38f1f ("crypto:
chacha20poly1305 - set cra_name correctly")] and check it for error.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make crypto_drop_spawn() do nothing when the spawn hasn't been
initialized with an algorithm yet. This will allow simplifying error
handling in all the template ->create() functions, since on error they
will be able to just call their usual "free instance" function, rather
than having to handle dropping just the spawns that have been
initialized so far.
This does assume the spawn starts out zero-filled, but that's always the
case since instances are allocated with kzalloc(). And some other code
already assumes this anyway.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_TFM_RES_* flags were apparently meant as a way to make the
->setkey() functions provide more information about errors. But these
flags weren't actually being used or tested, and in many cases they
weren't being set correctly anyway. So they've now been removed.
Also, if someone ever actually needs to start better distinguishing
->setkey() errors (which is somewhat unlikely, as this has been unneeded
for a long time), we'd be much better off just defining different return
values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove CRYPTO_TFM_RES_MASK and all the unneeded logic that
propagates these flags around.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_TFM_RES_WEAK_KEY flag was apparently meant as a way to make
the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
There are also no tests that verify that all algorithms actually set (or
don't set) it correctly.
This is also the last remaining CRYPTO_TFM_RES_* flag, which means that
it's the only thing still needing all the boilerplate code which
propagates these flags around from child => parent tfms.
And if someone ever needs to distinguish this error in the future (which
is somewhat unlikely, as it's been unneeded for a long time), it would
be much better to just define a new return value like -EKEYREJECTED.
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_TFM_RES_BAD_KEY_LEN flag was apparently meant as a way to
make the ->setkey() functions provide more information about errors.
However, no one actually checks for this flag, which makes it pointless.
Also, many algorithms fail to set this flag when given a bad length key.
Reviewing just the generic implementations, this is the case for
aes-fixed-time, cbcmac, echainiv, nhpoly1305, pcrypt, rfc3686, rfc4309,
rfc7539, rfc7539esp, salsa20, seqiv, and xcbc. But there are probably
many more in arch/*/crypto/ and drivers/crypto/.
Some algorithms can even set this flag when the key is the correct
length. For example, authenc and authencesn set it when the key payload
is malformed in any way (not just a bad length), the atmel-sha and ccree
drivers can set it if a memory allocation fails, and the chelsio driver
sets it for bad auth tag lengths, not just bad key lengths.
So even if someone actually wanted to start checking this flag (which
seems unlikely, since it's been unused for a long time), there would be
a lot of work needed to get it working correctly. But it would probably
be much better to go back to the drawing board and just define different
return values, like -EINVAL if the key is invalid for the algorithm vs.
-EKEYREJECTED if the key was rejected by a policy like "no weak keys".
That would be much simpler, less error-prone, and easier to test.
So just remove this flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
skcipher_walk_aead() is unused and is identical to
skcipher_walk_aead_encrypt(), so remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch introduces the skcipher_ialg_simple helper which fetches
the crypto_alg structure from a simple skcipher instance's spawn.
This allows us to remove the third argument from the function
skcipher_alloc_instance_simple.
In doing so the reference count to the algorithm is now maintained
by the Crypto API and the caller no longer needs to drop the alg
refcount.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch changes crypto_grab_spawn to retain the reference count
on the algorithm. This is because the caller needs to access the
algorithm parameters and without the reference count the algorithm
can be freed at any time.
The reference count will be subsequently dropped by the crypto API
once the instance has been registered. The helper crypto_drop_spawn
will also conditionally drop the reference count depending on whether
it has been registered.
Note that the code is actually added to crypto_init_spawn. However,
unless the caller activates this by setting spawn->dropref beforehand
then nothing happens. The only caller that sets dropref is currently
crypto_grab_spawn.
Once all legacy users of crypto_init_spawn disappear, then we can
kill the dropref flag.
Internally each instance will maintain a list of its spawns prior
to registration. This memory used by this list is shared with
other fields that are only used after registration. In order for
this to work a new flag spawn->registered is added to indicate
whether spawn->inst can be used.
Fixes: d6ef2f198d ("crypto: api - Add crypto_grab_spawn primitive")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some of the algorithm unregistration functions return -ENOENT when asked
to unregister a non-registered algorithm, while others always return 0
or always return void. But no users check the return value, except for
two of the bulk unregistration functions which print a message on error
but still always return 0 to their caller, and crypto_del_alg() which
calls crypto_unregister_instance() which always returns 0.
Since unregistering a non-registered algorithm is always a kernel bug
but there isn't anything callers should do to handle this situation at
runtime, let's simplify things by making all the unregistration
functions return void, and moving the error message into
crypto_unregister_alg() and upgrading it to a WARN().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y, the first lookup of an
algorithm that needs to be instantiated using a template will always get
the generic implementation, even when an accelerated one is available.
This happens because the extra self-tests for the accelerated
implementation allocate the generic implementation for comparison
purposes, and then crypto_alg_tested() for the generic implementation
"fulfills" the original request (i.e. sets crypto_larval::adult).
This patch fixes this by only fulfilling the original request if
we are currently the best outstanding larval as judged by the
priority. If we're not the best then we will ask all waiters on
that larval request to retry the lookup.
Note that this patch introduces a behaviour change when the module
providing the new algorithm is unregistered during the process.
Previously we would have failed with ENOENT, after the patch we
will instead redo the lookup.
Fixes: 9a8a6b3f09 ("crypto: testmgr - fuzz hashes against...")
Fixes: d435e10e67 ("crypto: testmgr - fuzz skciphers against...")
Fixes: 40153b10d9 ("crypto: testmgr - fuzz AEADs against...")
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-----BEGIN PGP SIGNATURE-----
iJYEABYIAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCXfrLASAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0pZfAQD9F5Vjdqp3fWk+
pxt+eD9+xaD2MYuSVO2AEVBC949vdQD/TP7xnb66w7n9YtMtm9MgvysHAakJYeAe
l4XsHAiPHgI=
=CFIs
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Bunch of fixes for rc3"
* tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm/tpm_ftpm_tee: add shutdown call back
tpm: selftest: cleanup after unseal with wrong auth/policy test
tpm: selftest: add test covering async mode
tpm: fix invalid locking in NONBLOCKING mode
security: keys: trusted: fix lost handle flush
tpm_tis: reserve chip for duration of tpm_tis_core_init
KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() fails
KEYS: remove CONFIG_KEYS_COMPAT
No error code was being set on this error path.
Cc: stable@vger.kernel.org
Fixes: ad4b1eb5fb ("KEYS: asym_tpm: Implement encryption operation [ver #2]")
Fixes: c08fed7371 ("KEYS: Implement encrypt, decrypt and sign for software asymmetric key [ver #2]")
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
This patch switches hmac over to the new init_tfm/exit_tfm interface
as opposed to cra_init/cra_exit. This way the shash API can make
sure that descsize does not exceed the maximum.
This patch also adds the API helper shash_alg_instance.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The shash interface supports a dynamic descsize field because of
the presence of fallbacks (it's just padlock-sha actually, perhaps
we can remove it one day). As it is the API does not verify the
setting of descsize at all. It is up to the individual algorithms
to ensure that descsize does not exceed the specified maximum value
of HASH_MAX_DESCSIZE (going above would cause stack corruption).
In order to allow the API to impose this limit directly, this patch
adds init_tfm/exit_tfm hooks to the shash_alg structure. We can
then verify the descsize setting in the API directly.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch explains the logic behind crypto_remove_spawns and its
underling crypto_more_spawns.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently when a spawn is removed we will zap its alg field.
This is racy because the spawn could belong to an unregistered
instance which may dereference the spawn->alg field.
This patch fixes this by keeping spawn->alg constant and instead
adding a new spawn->dead field to indicate that a spawn is going
away.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function crypto_spawn_alg is racy because it drops the lock
before shooting the dying algorithm. The algorithm could disappear
altogether before we shoot it.
This patch fixes it by moving the shooting into the locked section.
Fixes: 6bfd48096f ("[CRYPTO] api: Added spawns")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We need to check whether spawn->alg is NULL under lock as otherwise
the algorithm could be removed from under us after we have checked
it and found it to be non-NULL. This could cause us to remove the
spawn from a non-existent list.
Fixes: 7ede5a5ba5 ("crypto: api - Fix crypto_drop_spawn crash...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As af_alg_release_parent may be called from BH context (most notably
due to an async request that only completes after socket closure,
or as reported here because of an RCU-delayed sk_destruct call), we
must use bh_lock_sock instead of lock_sock.
Reported-by: syzbot+c2f1558d49e25cc36e5e@syzkaller.appspotmail.com
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: c840ac6af3 ("crypto: af_alg - Disallow bind/setkey/...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit 63d3578892 ("crypto: pcrypt - remove padata cpumask
notifier") this feature is unused, so get rid of it.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Of the three fields in crt_u.cipher (struct cipher_tfm), ->cit_setkey()
is pointless because it always points to setkey() in crypto/cipher.c.
->cit_decrypt_one() and ->cit_encrypt_one() are slightly less pointless,
since if the algorithm doesn't have an alignmask, they are set directly
to ->cia_encrypt() and ->cia_decrypt(). However, this "optimization"
isn't worthwhile because:
- The "cipher" algorithm type is the only algorithm still using crt_u,
so it's bloating every struct crypto_tfm for every algorithm type.
- If the algorithm has an alignmask, this "optimization" actually makes
things slower, as it causes 2 indirect calls per block rather than 1.
- It adds extra code complexity.
- Some templates already call ->cia_encrypt()/->cia_decrypt() directly
instead of going through ->cit_encrypt_one()/->cit_decrypt_one().
- The "cipher" algorithm type never gives optimal performance anyway.
For that, a higher-level type such as skcipher needs to be used.
Therefore, just remove the extra indirection, and make
crypto_cipher_setkey(), crypto_cipher_encrypt_one(), and
crypto_cipher_decrypt_one() be direct calls into crypto/cipher.c.
Also remove the unused function crypto_cipher_cast().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crt_u.compress (struct compress_tfm) is pointless because its two
fields, ->cot_compress() and ->cot_decompress(), always point to
crypto_compress() and crypto_decompress().
Remove this pointless indirection, and just make crypto_comp_compress()
and crypto_comp_decompress() be direct calls to what used to be
crypto_compress() and crypto_decompress().
Also remove the unused function crypto_comp_cast().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The whole point of using an AEAD over length-preserving encryption is
that the data is authenticated. However currently the fuzz tests don't
test any inauthentic inputs to verify that the data is actually being
authenticated. And only two algorithms ("rfc4543(gcm(aes))" and
"ccm(aes)") even have any inauthentic test vectors at all.
Therefore, update the AEAD fuzz tests to sometimes generate inauthentic
test vectors, either by generating a (ciphertext, AAD) pair without
using the key, or by mutating an authentic pair that was generated.
To avoid flakiness, only assume this works reliably if the auth tag is
at least 8 bytes. Also account for the rfc4106, rfc4309, and rfc7539esp
algorithms intentionally ignoring the last 8 AAD bytes, and for some
algorithms doing extra checks that result in EINVAL rather than EBADMSG.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation for adding inauthentic input fuzz tests, which don't
require that a generic implementation of the algorithm be available,
refactor test_aead_vs_generic_impl() so that instead there's a
higher-level function test_aead_extra() which initializes a struct
aead_extra_tests_ctx and then calls test_aead_vs_generic_impl() with a
pointer to that struct.
As a bonus, this reduces stack usage.
Also switch from crypto_aead_alg(tfm)->maxauthsize to
crypto_aead_maxauthsize(), now that the latter is available in
<crypto/aead.h>.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The alignment bug in ghash_setkey() fixed by commit 5c6bc4dfa5
("crypto: ghash - fix unaligned memory access in ghash_setkey()")
wasn't reliably detected by the crypto self-tests on ARM because the
tests only set the keys directly from the test vectors.
To improve test coverage, update the tests to sometimes pass misaligned
keys to setkey(). This applies to shash, ahash, skcipher, and aead.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When checking two implementations of the same skcipher algorithm for
consistency, require that the minimum key size be the same, not just the
maximum key size. There's no good reason to allow different minimum key
sizes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently if the comparison fuzz tests encounter an encryption error
when generating an skcipher or AEAD test vector, they will still test
the decryption side (passing it the uninitialized ciphertext buffer)
and expect it to fail with the same error.
This is sort of broken because it's not well-defined usage of the API to
pass an uninitialized buffer, and furthermore in the AEAD case it's
acceptable for the decryption error to be EBADMSG (meaning "inauthentic
input") even if the encryption error was something else like EINVAL.
Fix this for skcipher by explicitly initializing the ciphertext buffer
on error, and for AEAD by skipping the decryption test on error.
Reported-by: Pascal Van Leeuwen <pvanleeuwen@verimatrix.com>
Fixes: d435e10e67 ("crypto: testmgr - fuzz skciphers against their generic implementation")
Fixes: 40153b10d9 ("crypto: testmgr - fuzz AEADs against their generic implementation")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The essiv and hmac templates refuse to use any hash algorithm that has a
->setkey() function, which includes not just algorithms that always need
a key, but also algorithms that optionally take a key.
Previously the only optionally-keyed hash algorithms in the crypto API
were non-cryptographic algorithms like crc32, so this didn't really
matter. But that's changed with BLAKE2 support being added. BLAKE2
should work with essiv and hmac, just like any other cryptographic hash.
Fix this by allowing the use of both algorithms without a ->setkey()
function and algorithms that have the OPTIONAL_KEY flag set.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the removal of the blkcipher and ablkcipher algorithm types,
crypto_skcipher_extsize() now simply calls crypto_alg_extsize(). So
remove it and just use crypto_alg_extsize().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the removal of the blkcipher and ablkcipher algorithm types,
crypto_skcipher::decrypt is now redundant since it always equals
crypto_skcipher_alg(tfm)->decrypt.
Remove it and update crypto_skcipher_decrypt() accordingly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the removal of the blkcipher and ablkcipher algorithm types,
crypto_skcipher::encrypt is now redundant since it always equals
crypto_skcipher_alg(tfm)->encrypt.
Remove it and update crypto_skcipher_encrypt() accordingly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the removal of the blkcipher and ablkcipher algorithm types,
crypto_skcipher::setkey now always points to skcipher_setkey().
Simplify by removing this function pointer and instead just making
skcipher_setkey() be crypto_skcipher_setkey() directly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the removal of the blkcipher and ablkcipher algorithm types,
crypto_skcipher::keysize is now redundant since it always equals
crypto_skcipher_alg(tfm)->max_keysize.
Remove it and update crypto_skcipher_default_keysize() accordingly.
Also rename crypto_skcipher_default_keysize() to
crypto_skcipher_max_keysize() to clarify that it specifically returns
the maximum key size, not some unspecified "default".
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Due to the removal of the blkcipher and ablkcipher algorithm types,
crypto_skcipher::ivsize is now redundant since it always equals
crypto_skcipher_alg(tfm)->ivsize.
Remove it and update crypto_skcipher_ivsize() accordingly.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update a comment to refer to crypto_alloc_skcipher() rather than
crypto_alloc_blkcipher() (the latter having been removed).
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We should not be modifying the original request's MAY_SLEEP flag
upon completion. It makes no sense to do so anyway.
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 5068c7a883 ("crypto: pcrypt - Add pcrypt crypto...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto glue performed function prototype casting via macros to make
indirect calls to assembly routines. Instead of performing casts at the
call sites (which trips Control Flow Integrity prototype checking), switch
each prototype to a common standard set of arguments which allows the
removal of the existing macros. In order to keep pointer math unchanged,
internal casting between u128 pointers and u8 pointers is added.
Co-developed-by: João Moreira <joao.moreira@intel.com>
Signed-off-by: João Moreira <joao.moreira@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If the pcrypt template is used multiple times in an algorithm, then a
deadlock occurs because all pcrypt instances share the same
padata_instance, which completes requests in the order submitted. That
is, the inner pcrypt request waits for the outer pcrypt request while
the outer request is already waiting for the inner.
This patch fixes this by allocating a set of queues for each pcrypt
instance instead of using two global queues. In order to maintain
the existing user-space interface, the pinst structure remains global
so any sysfs modifications will apply to every pcrypt instance.
Note that when an update occurs we have to allocate memory for
every pcrypt instance. Should one of the allocations fail we
will abort the update without rolling back changes already made.
The new per-instance data structure is called padata_shell and is
essentially a wrapper around parallel_data.
Reproducer:
#include <linux/if_alg.h>
#include <sys/socket.h>
#include <unistd.h>
int main()
{
struct sockaddr_alg addr = {
.salg_type = "aead",
.salg_name = "pcrypt(pcrypt(rfc4106-gcm-aesni))"
};
int algfd, reqfd;
char buf[32] = { 0 };
algfd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(algfd, (void *)&addr, sizeof(addr));
setsockopt(algfd, SOL_ALG, ALG_SET_KEY, buf, 20);
reqfd = accept(algfd, 0, 0);
write(reqfd, buf, 32);
read(reqfd, buf, 16);
}
Reported-by: syzbot+56c7151cad94eec37c521f0e47d2eee53f9361c4@syzkaller.appspotmail.com
Fixes: 5068c7a883 ("crypto: pcrypt - Add pcrypt crypto parallelization wrapper")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On module unload of pcrypt we must unregister the crypto algorithms
first and then tear down the padata structure. As otherwise the
crypto algorithms are still alive and can be used while the padata
structure is being freed.
Fixes: 5068c7a883 ("crypto: pcrypt - Add pcrypt crypto...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().
This patch is generated using following script:
EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"
git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do
if [[ "$file" =~ $EXCLUDE_FILES ]]; then
continue
fi
sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
Use chacha20_setkey() and chacha12_setkey() from
<crypto/internal/chacha.h> instead of defining them again in
chacha_generic.c.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Another instance of CRYPTO_BLKCIPHER made it in just after it was
renamed to CRYPTO_SKCIPHER. Fix it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kfree has taken null pointer check into account. so it is safe to
remove the unnecessary check.
Signed-off-by: Chen Wandun <chenwandun@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The TFM context can be renamed to a more appropriate name and the local
varaibles as well, using 'tctx' which seems to be more common than
'mctx'.
The _setkey callback was the last one without the blake2b_ prefix,
rename that too.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that there's only one call to blake2b_update, we can merge it to the
callback and simplify. The empty input check is split and the rest of
code un-indented.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The helper is trival and called once, inlining makes things simpler.
There's a comment to tie it back to the idea behind the code.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
All the code for param block has been inlined, last_node and outlen from
the state are not used or have become redundant due to other code.
Remove it.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The keyed init writes the key bytes to the input buffer and does an
update. We can do that in two ways: fill the buffer and update
immediatelly. This is what current blake2b_init_key does. Any other
following _update or _final will continue from the updated state.
The other way is to write the key and set the number of bytes to process
at the next _update or _final, lazy evaluation. Which leads to the the
simplified code in this patch.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The call chain from blake2b_init can be simplified because the param
block is effectively zeros, besides the key.
- blake2b_init0 zeroes state and sets IV
- blake2b_init sets up param block with defaults (key and some 1s)
- init with key, write it to the input buffer and recalculate state
So the compact way is to zero out the state and initialize index 0 of
the state directly with the non-zero values and the key.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
blake2b_final is called only once, merge it to the crypto API callback
and simplify. This avoids the temporary buffer and swaps the bytes of
internal buffer.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all users of the deprecated ablkcipher interface have been
moved to the skcipher interface, ablkcipher is no longer used and
can be removed.
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
this patchs constify the alg list because this list is never modified.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This implementation is the fastest available x86_64 implementation, and
unlike Sandy2x, it doesn't requie use of the floating point registers at
all. Instead it makes use of BMI2 and ADX, available on recent
microarchitectures. The implementation was written by Armando
Faz-Hernández with contributions (upstream) from Samuel Neves and me,
in addition to further changes in the kernel implementation from us.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Co-developed-by: Samuel Neves <sneves@dei.uc.pt>
[ardb: - move to arch/x86/crypto
- wire into lib/crypto framework
- implement crypto API KPP hooks ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose the generic Curve25519 library via the crypto API KPP interface.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of introducing KPP implementations of Curve25519, import
the set of test cases proposed by the Zinc patch set, but converted to
the KPP format.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
These implementations from Samuel Neves support AVX and AVX-512VL.
Originally this used AVX-512F, but Skylake thermal throttling made
AVX-512VL more attractive and possible to do with negligable difference.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Samuel Neves <sneves@dei.uc.pt>
Co-developed-by: Samuel Neves <sneves@dei.uc.pt>
[ardb: move to arch/x86/crypto, wire into lib/crypto framework]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Wire up our newly added Blake2s implementation via the shash API.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to use 128-bit integer arithmetic in C code, the architecture
needs to have declared support for it by setting ARCH_SUPPORTS_INT128,
and it requires a version of the toolchain that supports this at build
time. This is why all existing tests for ARCH_SUPPORTS_INT128 also test
whether __SIZEOF_INT128__ is defined, since this is only the case for
compilers that can support 128-bit integers.
Let's fold this additional test into the Kconfig declaration of
ARCH_SUPPORTS_INT128 so that we can also use the symbol in Makefiles,
e.g., to decide whether a certain object needs to be included in the
first place.
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation for
MIPS authored by Andy Polyakov, a prior 64-bit only version of which has been
contributed by him to the OpenSSL project. The file 'poly1305-mips.pl' is taken
straight from this upstream GitHub repository [0] at commit
d22ade312a7af958ec955620b0d241cf42c37feb, and already contains all the changes
required to build it as part of a Linux kernel module.
[0] https://github.com/dot-asm/cryptogams
Co-developed-by: Andy Polyakov <appro@cryptogams.org>
Signed-off-by: Andy Polyakov <appro@cryptogams.org>
Co-developed-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Implement the arch init/update/final Poly1305 library routines in the
accelerated SIMD driver for x86 so they are accessible to users of
the Poly1305 library interface as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the dependency on the generic Poly1305 driver. Instead, depend
on the generic library so that we only reuse code without pulling in
the generic skcipher implementation as well.
While at it, remove the logic that prefers the non-SIMD path for short
inputs - this is no longer necessary after recent FPU handling changes
on x86.
Since this removes the last remaining user of the routines exported
by the generic shash driver, unexport them and make them static.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expose the existing generic Poly1305 code via a init/update/final
library interface so that callers are not required to go through
the crypto API's shash abstraction to access it. At the same time,
make some preparations so that the library implementation can be
superseded by an accelerated arch-specific version in the future.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of exposing a Poly1305 library interface directly from
the accelerated x86 driver, align the state descriptor of the x86 code
with the one used by the generic driver. This is needed to make the
library interface unified between all implementations.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move the core Poly1305 routines shared between the generic Poly1305
shash driver and the Adiantum and NHPoly1305 drivers into a separate
library so that using just this pieces does not pull in the crypto
API pieces of the generic Poly1305 routine.
In a subsequent patch, we will augment this generic library with
init/update/final routines so that Poyl1305 algorithm can be used
directly without the need for using the crypto API's shash abstraction.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all users of generic ChaCha code have moved to the core library,
there is no longer a need for the generic ChaCha skcpiher driver to
export parts of it implementation for reuse by other drivers. So drop
the exports, and make the symbols static.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This integrates the accelerated MIPS 32r2 implementation of ChaCha
into both the API and library interfaces of the kernel crypto stack.
The significance of this is that, in addition to becoming available
as an accelerated library implementation, it can also be used by
existing crypto API code such as Adiantum (for block encryption on
ultra low performance cores) or IPsec using chacha20poly1305. These
are use cases that have already opted into using the abstract crypto
API. In order to support Adiantum, the core assembler routine has
been adapted to take the round count as a function argument rather
than hardcoding it to 20.
Co-developed-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Wire the existing x86 SIMD ChaCha code into the new ChaCha library
interface, so that users of the library interface will get the
accelerated version when available.
Given that calls into the library API will always go through the
routines in this module if it is enabled, switch to static keys
to select the optimal implementation available (which may be none
at all, in which case we defer to the generic implementation for
all invocations).
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of extending the x86 ChaCha driver to also expose the ChaCha
library interface, drop the dependency on the chacha_generic crypto driver
as a non-SIMD fallback, and depend on the generic ChaCha library directly.
This way, we only pull in the code we actually need, without registering
a set of ChaCha skciphers that we will never use.
Since turning the FPU on and off is cheap these days, simplify the SIMD
routine by dropping the per-page yield, which makes for a cleaner switch
to the library API as well. This also allows use to invoke the skcipher
walk routines in non-atomic mode.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, our generic ChaCha implementation consists of a permute
function in lib/chacha.c that operates on the 64-byte ChaCha state
directly [and which is always included into the core kernel since it
is used by the /dev/random driver], and the crypto API plumbing to
expose it as a skcipher.
In order to support in-kernel users that need the ChaCha streamcipher
but have no need [or tolerance] for going through the abstractions of
the crypto API, let's expose the streamcipher bits via a library API
as well, in a way that permits the implementation to be superseded by
an architecture specific one if provided.
So move the streamcipher code into a separate module in lib/crypto,
and expose the init() and crypt() routines to users of the library.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of introducing a set of crypto library interfaces, tidy
up the Makefile and split off the Kconfig symbols into a separate file.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If aead is built as a module along with cryptomgr, it creates a
dependency loop due to the dependency chain aead => crypto_null =>
cryptomgr => aead.
This is due to the presence of the AEAD geniv code. This code is
not really part of the AEAD API but simply support code for IV
generators such as seqiv. This patch moves the geniv code into
its own module thus breaking the dependency loop.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto API requires cryptomgr to be present for probing to work
so we need a softdep to ensure that cryptomgr is added to the
initramfs.
This was usually not a problem because until very recently it was
not practical to build crypto API as module but with the recent
work to eliminate direct AES users this is now possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move existing code to trusted keys subsystem. Also, rename files with
"tpm" as suffix which provides the underlying implementation.
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Switch to utilize common heap based tpm_buf code for TPM based trusted
and asymmetric keys rather than using stack based tpm1_buf code. Also,
remove tpm1_buf code.
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Move tpm_buf code to common include/linux/tpm.h header so that it can
be reused via other subsystems like trusted keys etc.
Also rename trusted keys and asymmetric keys usage of TPM 1.x buffer
implementation to tpm1_buf to avoid any compilation errors.
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Now that the blkcipher algorithm type has been removed in favor of
skcipher, rename the crypto_blkcipher kernel module to crypto_skcipher,
and rename the config options accordingly:
CONFIG_CRYPTO_BLKCIPHER => CONFIG_CRYPTO_SKCIPHER
CONFIG_CRYPTO_BLKCIPHER2 => CONFIG_CRYPTO_SKCIPHER2
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all "blkcipher" algorithms have been converted to "skcipher",
remove the blkcipher algorithm type.
The skcipher (symmetric key cipher) algorithm type was introduced a few
years ago to replace both blkcipher and ablkcipher (synchronous and
asynchronous block cipher). The advantages of skcipher include:
- A much less confusing name, since none of these algorithm types have
ever actually been for raw block ciphers, but rather for all
length-preserving encryption modes including block cipher modes of
operation, stream ciphers, and other length-preserving modes.
- It unified blkcipher and ablkcipher into a single algorithm type
which supports both synchronous and asynchronous implementations.
Note, blkcipher already operated only on scatterlists, so the fact
that skcipher does too isn't a regression in functionality.
- Better type safety by using struct skcipher_alg, struct
crypto_skcipher, etc. instead of crypto_alg, crypto_tfm, etc.
- It sometimes simplifies the implementations of algorithms.
Also, the blkcipher API was no longer being tested.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the crypto_skcipher_type() function has been removed, there's
no reason to call the crypto_type struct for skciphers
"crypto_skcipher_type2". Rename it to simply "crypto_skcipher_type".
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_has_skcipher() and crypto_has_skcipher2() do the same thing: they
check for the availability of an algorithm of type skcipher, blkcipher,
or ablkcipher, which also meets any non-type constraints the caller
specified. And they have exactly the same prototype.
Therefore, eliminate the redundancy by removing crypto_has_skcipher()
and renaming crypto_has_skcipher2() to crypto_has_skcipher().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test vectors for blake2b with various digest sizes. As the algorithm is
the same up to the digest calculation, the key and input data length is
distributed in a way that tests all combinanions of the two over the
digest sizes.
Based on the suggestion from Eric, the following input sizes are tested
[0, 1, 7, 15, 64, 247, 256], where blake2b blocksize is 128, so the
padded and the non-padded input buffers are tested.
blake2b-160 blake2b-256 blake2b-384 blake2b-512
---------------------------------------------------
len=0 | klen=0 klen=1 klen=32 klen=64
len=1 | klen=32 klen=64 klen=0 klen=1
len=7 | klen=64 klen=0 klen=1 klen=32
len=15 | klen=1 klen=32 klen=64 klen=0
len=64 | klen=0 klen=1 klen=32 klen=64
len=247 | klen=32 klen=64 klen=0 klen=1
len=256 | klen=64 klen=0 klen=1 klen=32
Where key:
- klen=0: empty key
- klen=1: 1 byte value 0x42, 'B'
- klen=32: first 32 bytes of the default key, sequence 00..1f
- klen=64: default key, sequence 00..3f
The unkeyed vectors are ordered before keyed, as this is required by
testmgr.
CC: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The patch brings support of several BLAKE2 variants (2b with various
digest lengths). The keyed digest is supported, using tfm->setkey call.
The in-tree user will be btrfs (for checksumming), we're going to use
the BLAKE2b-256 variant.
The code is reference implementation taken from the official sources and
modified in terms of kernel coding style (whitespace, comments, uintXX_t
-> uXX types, removed unused prototypes and #ifdefs, removed testing
code, changed secure_zero_memory -> memzero_explicit, used own helpers
for unaligned reads/writes and rotations).
Further changes removed sanity checks of key length or output size,
these values are verified in the crypto API callbacks or hardcoded in
shash_alg and not exposed to users.
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The elliptic curve arithmetic library used by the EC-DH KPP implementation
assumes big endian byte order, and unconditionally reverses the byte
and word order of multi-limb quantities. On big endian systems, the byte
reordering is not necessary, while the word ordering needs to be retained.
So replace the __swab64() invocation with a call to be64_to_cpu() which
should do the right thing for both little and big endian builds.
Fixes: 3c4b23901a ("crypto: ecdh - Add ECDH software support")
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the glue code for the PowerPC SPE implementations of AES-ECB,
AES-CBC, AES-CTR, and AES-XTS from the deprecated "blkcipher" API to the
"skcipher" API. This is needed in order for the blkcipher API to be
removed.
Tested with:
export ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu-
make mpc85xx_defconfig
cat >> .config << EOF
# CONFIG_MODULES is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_XTS=y
CONFIG_CRYPTO_AES_PPC_SPE=y
EOF
make olddefconfig
make -j32
qemu-system-ppc -M mpc8544ds -cpu e500 -nographic \
-kernel arch/powerpc/boot/zImage \
-append cryptomgr.fuzz_iterations=1000
Note that xts-ppc-spe still fails the comparison tests due to the lack
of ciphertext stealing support. This is not addressed by this patch.
This patch also cleans up the code by making ->encrypt() and ->decrypt()
call a common function for each of ECB, CBC, and XTS, and by using a
clearer way to compute the length to process at each step.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In order to speed up aegis128 processing even more, duplicate the init()
and final() routines as SIMD versions in their entirety. This results
in a 2x speedup on ARM Cortex-A57 for ~1500 byte packets (using AES
instructions).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of passing around an ops structure with function pointers,
which forces indirect calls to be used, refactor the code slightly
so we can use ordinary function calls. At the same time, switch to
a static key to decide whether or not the SIMD code path may be used.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the glue code for the SPARC64 DES opcodes implementations of
DES-ECB, DES-CBC, 3DES-ECB, and 3DES-CBC from the deprecated "blkcipher"
API to the "skcipher" API. This is needed in order for the blkcipher
API to be removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the glue code for the SPARC64 Camellia opcodes implementations
of Camellia-ECB and Camellia-CBC from the deprecated "blkcipher" API to
the "skcipher" API. This is needed in order for the blkcipher API to be
removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the glue code for the SPARC64 AES opcodes implementations of
AES-ECB, AES-CBC, and AES-CTR from the deprecated "blkcipher" API to the
"skcipher" API. This is needed in order for the blkcipher API to be
removed.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the following build warnings by adding a header for
the definitions shared between jitterentropy.c and
jitterentropy-kcapi.c. Fixes the following:
crypto/jitterentropy.c:445:5: warning: symbol 'jent_read_entropy' was not declared. Should it be static?
crypto/jitterentropy.c:475:18: warning: symbol 'jent_entropy_collector_alloc' was not declared. Should it be static?
crypto/jitterentropy.c:509:6: warning: symbol 'jent_entropy_collector_free' was not declared. Should it be static?
crypto/jitterentropy.c:516:5: warning: symbol 'jent_entropy_init' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:59:6: warning: symbol 'jent_zalloc' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:64:6: warning: symbol 'jent_zfree' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:69:5: warning: symbol 'jent_fips_enabled' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:74:6: warning: symbol 'jent_panic' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:79:6: warning: symbol 'jent_memcpy' was not declared. Should it be static?
crypto/jitterentropy-kcapi.c:93:6: warning: symbol 'jent_get_nstime' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Stephan Mueller <smueller@chronox.de
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In crypto_reportstat, a new skb is created by nlmsg_new(). This skb is
leaked if crypto_reportstat_alg() fails. Required release for skb is
added.
Fixes: cac5818c25 ("crypto: user - Implement a generic crypto statistics")
Cc: <stable@vger.kernel.org>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In crypto_report, a new skb is created via nlmsg_new(). This skb should
be released if crypto_report_alg() fails.
Fixes: a38f7907b9 ("crypto: Add userspace configuration API")
Cc: <stable@vger.kernel.org>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
when libkcapi test is executed using HW accelerator, cipher operation
return -74.Since af_alg_async_cb->ki_complete treat err as unsigned int,
libkcapi receive 429467222 even though it expect -ve value.
Hence its required to cast resultlen to int so that proper
error is returned to libkcapi.
AEAD one shot non-aligned test 2(libkcapi test)
./../bin/kcapi -x 10 -c "gcm(aes)" -i 7815d4b06ae50c9c56e87bd7
-k ea38ac0c9b9998c80e28fb496a2b88d9 -a
"853f98a750098bec1aa7497e979e78098155c877879556bb51ddeb6374cbaefc"
-t "c4ce58985b7203094be1d134c1b8ab0b" -q
"b03692f86d1b8b39baf2abb255197c98"
Fixes: d887c52d6a ("crypto: algif_aead - overhaul memory management")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that the Clang compiler has taken it upon itself to police the
compiler command line, and reject combinations for arguments it views
as incompatible, the AEGIS128 no longer builds correctly, and errors
out like this:
clang-10: warning: ignoring extension 'crypto' because the 'armv7-a'
architecture does not support it [-Winvalid-command-line-argument]
So let's switch to armv8-a instead, which matches the crypto-neon-fp-armv8
FPU profile we specify. Since neither were actually supported by GCC
versions before 4.8, let's tighten the Kconfig dependencies as well so
we won't run into errors when building with an ancient compiler.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: <ci_notify@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
One should not say "ec can be NULL" and then dereference it.
One cannot talk about the return value if the function returns void.
Signed-off-by: Alexander E. Patrakov <patrakov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The next version of Clang will start policing compiler command line
options, and will reject combinations of -march and -mfpu that it
thinks are incompatible.
This results in errors like
clang-10: warning: ignoring extension 'crypto' because the 'armv7-a'
architecture does not support it [-Winvalid-command-line-argument]
/tmp/aegis128-neon-inner-5ee428.s: Assembler messages:
/tmp/aegis128-neon-inner-5ee428.s:73: Error: selected
processor does not support `aese.8 q2,q14' in ARM mode
when buiding the SIMD aegis128 code for 32-bit ARM, given that the
'armv7-a' -march argument is considered to be compatible with the
ARM crypto extensions. Instead, we should use armv8-a, which does
allow the crypto extensions to be enabled.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added testvectors for the rfc3686(ctr(sm4)) skcipher algorithm
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added testvectors for the ofb(sm4) and cfb(sm4) skcipher algorithms
changes since v1:
- nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added testvectors for the hmac(sm3) ahash authentication algorithm
changes since v1 & v2:
-nothing
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add an additional gcm(aes) test case that triggers the code path in
the new arm64 driver that deals with tail blocks whose size is not
a multiple of the block size, and where the size of the preceding
input is a multiple of 64 bytes.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When algif_skcipher does a partial operation it always process data
that is a multiple of blocksize. However, for algorithms such as
CTR this is wrong because even though it can process any number of
bytes overall, the partial block must come at the very end and not
in the middle.
This is exactly what chunksize is meant to describe so this patch
changes blocksize to chunksize.
Fixes: 8ff590903d ("crypto: algif_skcipher - User-space...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull kernel lockdown mode from James Morris:
"This is the latest iteration of the kernel lockdown patchset, from
Matthew Garrett, David Howells and others.
From the original description:
This patchset introduces an optional kernel lockdown feature,
intended to strengthen the boundary between UID 0 and the kernel.
When enabled, various pieces of kernel functionality are restricted.
Applications that rely on low-level access to either hardware or the
kernel may cease working as a result - therefore this should not be
enabled without appropriate evaluation beforehand.
The majority of mainstream distributions have been carrying variants
of this patchset for many years now, so there's value in providing a
doesn't meet every distribution requirement, but gets us much closer
to not requiring external patches.
There are two major changes since this was last proposed for mainline:
- Separating lockdown from EFI secure boot. Background discussion is
covered here: https://lwn.net/Articles/751061/
- Implementation as an LSM, with a default stackable lockdown LSM
module. This allows the lockdown feature to be policy-driven,
rather than encoding an implicit policy within the mechanism.
The new locked_down LSM hook is provided to allow LSMs to make a
policy decision around whether kernel functionality that would allow
tampering with or examining the runtime state of the kernel should be
permitted.
The included lockdown LSM provides an implementation with a simple
policy intended for general purpose use. This policy provides a coarse
level of granularity, controllable via the kernel command line:
lockdown={integrity|confidentiality}
Enable the kernel lockdown feature. If set to integrity, kernel features
that allow userland to modify the running kernel are disabled. If set to
confidentiality, kernel features that allow userland to extract
confidential information from the kernel are also disabled.
This may also be controlled via /sys/kernel/security/lockdown and
overriden by kernel configuration.
New or existing LSMs may implement finer-grained controls of the
lockdown features. Refer to the lockdown_reason documentation in
include/linux/security.h for details.
The lockdown feature has had signficant design feedback and review
across many subsystems. This code has been in linux-next for some
weeks, with a few fixes applied along the way.
Stephen Rothwell noted that commit 9d1f8be5cf ("bpf: Restrict bpf
when kernel lockdown is in confidentiality mode") is missing a
Signed-off-by from its author. Matthew responded that he is providing
this under category (c) of the DCO"
* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
kexec: Fix file verification on S390
security: constify some arrays in lockdown LSM
lockdown: Print current->comm in restriction messages
efi: Restrict efivar_ssdt_load when the kernel is locked down
tracefs: Restrict tracefs when the kernel is locked down
debugfs: Restrict debugfs when the kernel is locked down
kexec: Allow kexec_file() with appropriate IMA policy when locked down
lockdown: Lock down perf when in confidentiality mode
bpf: Restrict bpf when kernel lockdown is in confidentiality mode
lockdown: Lock down tracing and perf kprobes when in confidentiality mode
lockdown: Lock down /proc/kcore
x86/mmiotrace: Lock down the testmmiotrace module
lockdown: Lock down module params that specify hardware parameters (eg. ioport)
lockdown: Lock down TIOCSSERIAL
lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
acpi: Disable ACPI table override if the kernel is locked down
acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
ACPI: Limit access to custom_method when the kernel is locked down
x86/msr: Restrict MSR access when the kernel is locked down
x86: Lock down IO port access when the kernel is locked down
...
Pull integrity updates from Mimi Zohar:
"The major feature in this time is IMA support for measuring and
appraising appended file signatures. In addition are a couple of bug
fixes and code cleanup to use struct_size().
In addition to the PE/COFF and IMA xattr signatures, the kexec kernel
image may be signed with an appended signature, using the same
scripts/sign-file tool that is used to sign kernel modules.
Similarly, the initramfs may contain an appended signature.
This contained a lot of refactoring of the existing appended signature
verification code, so that IMA could retain the existing framework of
calculating the file hash once, storing it in the IMA measurement list
and extending the TPM, verifying the file's integrity based on a file
hash or signature (eg. xattrs), and adding an audit record containing
the file hash, all based on policy. (The IMA support for appended
signatures patch set was posted and reviewed 11 times.)
The support for appended signature paves the way for adding other
signature verification methods, such as fs-verity, based on a single
system-wide policy. The file hash used for verifying the signature and
the signature, itself, can be included in the IMA measurement list"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: ima_api: Use struct_size() in kzalloc()
ima: use struct_size() in kzalloc()
sefltest/ima: support appended signatures (modsig)
ima: Fix use after free in ima_read_modsig()
MODSIGN: make new include file self contained
ima: fix freeing ongoing ahash_request
ima: always return negative code for error
ima: Store the measurement again when appraising a modsig
ima: Define ima-modsig template
ima: Collect modsig
ima: Implement support for module-style appended signatures
ima: Factor xattr_verify() out of ima_appraise_measurement()
ima: Add modsig appraise_type option for module-style appended signatures
integrity: Select CONFIG_KEYS instead of depending on it
PKCS#7: Introduce pkcs7_get_digest()
PKCS#7: Refactor verify_pkcs7_signature()
MODSIGN: Export module signature definitions
ima: initialize the "template" field with the default template
implementation details that do not belong in DM crypt. The wrapper
template for ESSIV generation that was factored out will also be used
by fscrypt in the future.
- Add root hash pkcs#7 signature verification to the DM verity target.
- Add a new "clone" DM target that allows for efficient remote
replication of a device.
- Enhance DM bufio's cache to be tailored to each client based on use.
Clients that make heavy use of the cache get more of it, and those
that use less have reduced cache usage.
- Add a new DM_GET_TARGET_VERSION ioctl to allow userspace to query the
version number of a DM target (even if the associated module isn't yet
loaded).
- Fix invalid memory access in DM zoned target.
- Fix the max_discard_sectors limit advertised by the DM raid target; it
was mistakenly storing the limit in bytes rather than sectors.
- Small optimizations and cleanups in DM writecache target.
- Various fixes and cleanups in DM core, DM raid1 and space map portion
of DM persistent data library.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl2D7ycTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWp9QCACwTkVGzPGMCbAaCVlCACo8B5JyY4OO
FNxucqUlt1MHKuBbzJd4XwNGlLg68xjMUKVPYPlgina7TaDl+wvlTbHchaJS8nak
x1zyhDSywy0F9f6HHiXJi/vshmAfa0xnIM6fQXVPM346S6xf9u7hqOJQMCrdvY92
w4FhuW9nVt5xizo8iC/3LzoWbhrWncT7dyZUZtG3/tmglhkEK7QwctlgQxcD7tXg
H1lhntQzHzpxQAVBefWWdw7ubuDd6XCHuQMaxRhyR++c62P3eKDR8ck9hhd3hZKv
E481gtxcsjKuYLxwULjqFJZaNFitWFNMJ7gppQyKRqCzn2zlGAL6npl8
=m6zD
-----END PGP SIGNATURE-----
Merge tag 'for-5.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- crypto and DM crypt advances that allow the crypto API to reclaim
implementation details that do not belong in DM crypt. The wrapper
template for ESSIV generation that was factored out will also be used
by fscrypt in the future.
- Add root hash pkcs#7 signature verification to the DM verity target.
- Add a new "clone" DM target that allows for efficient remote
replication of a device.
- Enhance DM bufio's cache to be tailored to each client based on use.
Clients that make heavy use of the cache get more of it, and those
that use less have reduced cache usage.
- Add a new DM_GET_TARGET_VERSION ioctl to allow userspace to query the
version number of a DM target (even if the associated module isn't
yet loaded).
- Fix invalid memory access in DM zoned target.
- Fix the max_discard_sectors limit advertised by the DM raid target;
it was mistakenly storing the limit in bytes rather than sectors.
- Small optimizations and cleanups in DM writecache target.
- Various fixes and cleanups in DM core, DM raid1 and space map portion
of DM persistent data library.
* tag 'for-5.4/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits)
dm: introduce DM_GET_TARGET_VERSION
dm bufio: introduce a global cache replacement
dm bufio: remove old-style buffer cleanup
dm bufio: introduce a global queue
dm bufio: refactor adjust_total_allocated
dm bufio: call adjust_total_allocated from __link_buffer and __unlink_buffer
dm: add clone target
dm raid: fix updating of max_discard_sectors limit
dm writecache: skip writecache_wait for pmem mode
dm stats: use struct_size() helper
dm crypt: omit parsing of the encapsulated cipher
dm crypt: switch to ESSIV crypto API template
crypto: essiv - create wrapper template for ESSIV generation
dm space map common: remove check for impossible sm_find_free() return value
dm raid1: use struct_size() with kzalloc()
dm writecache: optimize performance by sorting the blocks for writeback_all
dm writecache: add unlikely for getting two block with same LBA
dm writecache: remove unused member pointer in writeback_struct
dm zoned: fix invalid memory access
dm verity: add root hash pkcs#7 signature verification
...
With pcrypt's cpumask no longer used, take the CPU hotplug lock inside
padata_alloc_possible.
Useful later in the series for avoiding nested acquisition of the CPU
hotplug lock in padata when padata_alloc_possible is allocating an
unbound workqueue.
Without this patch, this nested acquisition would happen later in the
series:
pcrypt_init_padata
get_online_cpus
alloc_padata_possible
alloc_padata
alloc_workqueue(WQ_UNBOUND) // later in the series
alloc_and_link_pwqs
apply_wqattrs_lock
get_online_cpus // recursive rwsem acquisition
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that padata_do_parallel takes care of finding an alternate callback
CPU, there's no need for pcrypt's callback cpumask, so remove it and the
notifier callback that keeps it in sync.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
padata_do_parallel currently returns -EINVAL if the callback CPU isn't
in the callback cpumask.
pcrypt tries to prevent this situation by keeping its own callback
cpumask in sync with padata's and checks that the callback CPU it passes
to padata is valid. Make padata handle this instead.
padata_do_parallel now takes a pointer to the callback CPU and updates
it for the caller if an alternate CPU is used. Overall behavior in
terms of which callback CPUs are chosen stays the same.
Prepares for removal of the padata cpumask notifier in pcrypt, which
will fix a lockdep complaint about nested acquisition of the CPU hotplug
lock later in the series.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Move workqueue allocation inside of padata to prepare for further
changes to how padata uses workqueues.
Guarantees the workqueue is created with max_active=1, which padata
relies on to work correctly. No functional change.
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: linux-crypto@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
skcipher_walk_done may be called with an error by internal or
external callers. For those internal callers we shouldn't unmap
pages but for external callers we must unmap any pages that are
in use.
This patch distinguishes between the two cases by checking whether
walk->nbytes is zero or not. For internal callers, we now set
walk->nbytes to zero prior to the call. For external callers,
walk->nbytes has always been non-zero (as zero is used to indicate
the termination of a walk).
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Fixes: 5cde0af2a9 ("[CRYPTO] cipher: Added block cipher type")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The generic sha256 implementation from lib/crypto/sha256.c uses data
structs defined in crypto/sha.h, so lets move the function prototypes
there too.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Implement a template that wraps a (skcipher,shash) or (aead,shash) tuple
so that we can consolidate the ESSIV handling in fscrypt and dm-crypt and
move it into the crypto API. This will result in better test coverage, and
will allow future changes to make the bare cipher interface internal to the
crypto subsystem, in order to increase robustness of the API against misuse.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
crypto/aegis.h:27:32: warning:
crypto_aegis_const defined but not used [-Wunused-const-variable=]
crypto_aegis_const is only used in aegis128-core.c,
just move the definition over there.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a test vector for the ESSIV mode that is the most widely used,
i.e., using cbc(aes) and sha256, in both skcipher and AEAD modes
(the latter is used by tcrypt to encapsulate the authenc template
or h/w instantiations of the same)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When building the new aegis128 NEON code in big endian mode, Clang
complains about the const uint8x16_t permute vectors in the following
way:
crypto/aegis128-neon-inner.c:58:40: warning: vector initializers are not
compatible with NEON intrinsics in big endian mode
[-Wnonportable-vector-initialization]
static const uint8x16_t shift_rows = {
^
crypto/aegis128-neon-inner.c:58:40: note: consider using vld1q_u8() to
initialize a vector from memory, or vcombine_u8(vcreate_u8(), vcreate_u8())
to initialize from integer constants
Since the same issue applies to the uint8x16x4_t loads of the AES Sbox,
update those references as well. However, since GCC does not implement
the vld1q_u8_x4() intrinsic, switch from IS_ENABLED() to a preprocessor
conditional to conditionally include this code.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop the duplicate generic sha256 (and sha224) implementation from
crypto/sha256_generic.c and use the implementation from
lib/crypto/sha256.c instead.
"diff -u lib/crypto/sha256.c sha256_generic.c" shows that the core
sha256_transform function from both implementations is identical and
the other code is functionally identical too.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Before this commit lib/crypto/sha256.c has only been used in the s390 and
x86 purgatory code, make it suitable for generic use:
* Export interesting symbols
* Add -D__DISABLE_EXPORTS to CFLAGS_sha256.o for purgatory builds to
avoid the exports for the purgatory builds
* Add to lib/crypto/Makefile and crypto/Kconfig
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a bunch of missing spaces after commas and arround operators.
Note the main goal of this is to make sha256_transform and its helpers
identical in formatting too the duplcate implementation in lib/sha256.c,
so that "diff -u" can be used to compare them to prove that no functional
changes are made when further patches in this series consolidate the 2
implementations into 1.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Another one for the cipher museum: split off DES core processing into
a separate module so other drivers (mostly for crypto accelerators)
can reuse the code without pulling in the generic DES cipher itself.
This will also permit the cipher interface to be made private to the
crypto API itself once we move the only user in the kernel (CIFS) to
this library interface.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In preparation of moving the shared key expansion routine into the
DES library, move the verification done by __des3_ede_setkey() into
its callers.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The recently added helper routine to perform key strength validation
of triple DES keys is slightly inadequate, since it comes in two versions,
neither of which are highly useful for anything other than skciphers (and
many drivers still use the older blkcipher interfaces).
So let's add a new helper and, considering that this is a helper function
that is only intended to be used by crypto code itself, put it in a new
des.h header under crypto/internal.
While at it, implement a similar helper for single DES, so that we can
start replacing the pattern of calling des_ekey() into a temp buffer
that occurs in many drivers in drivers/crypto.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is a preparatory patch for kexec_file_load() lockdown. A locked down
kernel needs to prevent unsigned kernel images from being loaded with
kexec_file_load(). Currently, the only way to force the signature
verification is compiling with KEXEC_VERIFY_SIG. This prevents loading
usigned images even when the kernel is not locked down at runtime.
This patch splits KEXEC_VERIFY_SIG into KEXEC_SIG and KEXEC_SIG_FORCE.
Analogous to the MODULE_SIG and MODULE_SIG_FORCE for modules, KEXEC_SIG
turns on the signature verification but allows unsigned images to be
loaded. KEXEC_SIG_FORCE disallows images without a valid signature.
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
cc: kexec@lists.infradead.org
Signed-off-by: James Morris <jmorris@namei.org>
Provide a version of the core AES transform to the aegis128 SIMD
code that does not rely on the special AES instructions, but uses
plain NEON instructions instead. This allows the SIMD version of
the aegis128 driver to be used on arm64 systems that do not
implement those instructions (which are not mandatory in the
architecture), such as the Raspberry Pi 3.
Since GCC makes a mess of this when using the tbl/tbx intrinsics
to perform the sbox substitution, preload the Sbox into v16..v31
in this case and use inline asm to emit the tbl/tbx instructions.
Clang does not support this approach, nor does it require it, since
it does a much better job at code generation, so there we use the
intrinsics as usual.
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provide an accelerated implementation of aegis128 by wiring up the
SIMD hooks in the generic driver to an implementation based on NEON
intrinsics, which can be compiled to both ARM and arm64 code.
This results in a performance of 2.2 cycles per byte on Cortex-A53,
which is a performance increase of ~11x compared to the generic
code.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add some plumbing to allow the AEGIS128 code to be built with SIMD
routines for acceleration.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the missing ciphertext stealing part of the XTS-AES
specification, which permits inputs of any size >= the block size.
Cc: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Return -EINVAL on an attempt to set the authsize to 0 with an auth.
algorithm with a non-zero digestsize (i.e. anything but digest_null)
as authenticating the data and then throwing away the result does not
make any sense at all.
The digestsize zero exception is for use with digest_null for testing
purposes only.
Signed-off-by: Pascal van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto/streebog_generic.c:162:17: warning:
Pi defined but not used [-Wunused-const-variable=]
crypto/streebog_generic.c:151:17: warning:
Tau defined but not used [-Wunused-const-variable=]
They are never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto/aes_generic.c:64:18: warning:
rco_tab defined but not used [-Wunused-const-variable=]
It is never used, so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reference counters are preferred to use refcount_t instead of
atomic_t.
This is because the implementation of refcount_t can prevent
overflows and detect possible use-after-free.
So convert atomic_t ref counters to refcount_t.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on seqiv, IPsec ESP and rfc4543/rfc4106 the assoclen can be 16 or
20 bytes.
From esp4/esp6, assoclen is sizeof IP Header. This includes spi, seq_no
and extended seq_no, that is 8 or 12 bytes.
In seqiv, to asscolen is added the IV size (8 bytes).
Therefore, the assoclen, for rfc4543, should be restricted to 16 or 20
bytes, as for rfc4106.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Reviewed-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto engine initializes its kworker thread to FIFO-99 (when
requesting RT priority), reduce this to FIFO-50.
FIFO-99 is the very highest priority available to SCHED_FIFO and
it not a suitable default; it would indicate the crypto work is the
most important work on the machine.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added inline helper functions to check authsize and assoclen for
gcm, rfc4106 and rfc4543.
These are used in the generic implementation of gcm, rfc4106 and
rfc4543.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
IMA will need to access the digest of the PKCS7 message (as calculated by
the kernel) before the signature is verified, so introduce
pkcs7_get_digest() for that purpose.
Also, modify pkcs7_digest() to detect when the digest was already
calculated so that it doesn't have to do redundant work. Verifying that
sinfo->sig->digest isn't NULL is sufficient because both places which
allocate sinfo->sig (pkcs7_parse_message() and pkcs7_note_signed_info())
use kzalloc() so sig->digest is always initialized to zero.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Recent clang-9 snapshots double the kernel stack usage when building
this file with -O0 -fsanitize=kernel-hwaddress, compared to clang-8
and older snapshots, this changed between commits svn364966 and
svn366056:
crypto/jitterentropy.c:516:5: error: stack frame size of 2640 bytes in function 'jent_entropy_init' [-Werror,-Wframe-larger-than=]
int jent_entropy_init(void)
^
crypto/jitterentropy.c:185:14: error: stack frame size of 2224 bytes in function 'jent_lfsr_time' [-Werror,-Wframe-larger-than=]
static __u64 jent_lfsr_time(struct rand_data *ec, __u64 time, __u64 loop_cnt)
^
I prepared a reduced test case in case any clang developers want to
take a closer look, but from looking at the earlier output it seems
that even with clang-8, something was very wrong here.
Turn off any KASAN and UBSAN sanitizing for this file, as that likely
clashes with -O0 anyway. Turning off just KASAN avoids the warning
already, but I suspect both of these have undesired side-effects
for jitterentropy.
Link: https://godbolt.org/z/fDcwZ5
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reverts commit ecc8bc81f2
("crypto: aegis128 - provide a SIMD implementation based on NEON
intrinsics") and commit 7cdc0ddbf7
("crypto: aegis128 - add support for SIMD acceleration").
They cause compile errors on platforms other than ARM because
the mechanism to selectively compile the SIMD code is broken.
Repoted-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To help avoid confusion, add a comment to ghash-generic.c which explains
the convention that the kernel's implementation of GHASH uses.
Also update the Kconfig help text and module descriptions to call GHASH
a "hash function" rather than a "message digest", since the latter
normally means a real cryptographic hash function, which GHASH is not.
Cc: Pascal Van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Pascal Van Leeuwen <pvanleeuwen@verimatrix.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Clang sometimes makes very different inlining decisions from gcc.
In case of the aegis crypto algorithms, it decides to turn the innermost
primitives (and, xor, ...) into separate functions but inline most of
the rest.
This results in a huge amount of variables spilled on the stack, leading
to rather slow execution as well as kernel stack usage beyond the 32-bit
warning limit when CONFIG_KASAN is enabled:
crypto/aegis256.c:123:13: warning: stack frame size of 648 bytes in function 'crypto_aegis256_encrypt_chunk' [-Wframe-larger-than=]
crypto/aegis256.c:366:13: warning: stack frame size of 1264 bytes in function 'crypto_aegis256_crypt' [-Wframe-larger-than=]
crypto/aegis256.c:187:13: warning: stack frame size of 656 bytes in function 'crypto_aegis256_decrypt_chunk' [-Wframe-larger-than=]
crypto/aegis128l.c:135:13: warning: stack frame size of 832 bytes in function 'crypto_aegis128l_encrypt_chunk' [-Wframe-larger-than=]
crypto/aegis128l.c:415:13: warning: stack frame size of 1480 bytes in function 'crypto_aegis128l_crypt' [-Wframe-larger-than=]
crypto/aegis128l.c:218:13: warning: stack frame size of 848 bytes in function 'crypto_aegis128l_decrypt_chunk' [-Wframe-larger-than=]
crypto/aegis128.c:116:13: warning: stack frame size of 584 bytes in function 'crypto_aegis128_encrypt_chunk' [-Wframe-larger-than=]
crypto/aegis128.c:351:13: warning: stack frame size of 1064 bytes in function 'crypto_aegis128_crypt' [-Wframe-larger-than=]
crypto/aegis128.c:177:13: warning: stack frame size of 592 bytes in function 'crypto_aegis128_decrypt_chunk' [-Wframe-larger-than=]
Forcing the primitives to all get inlined avoids the issue and the
resulting code is similar to what gcc produces.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, NETLINK_CRYPTO works only in the init network namespace. It
doesn't make much sense to cut it out of the other network namespaces,
so do the minor plumbing work necessary to make it work in any network
namespace. Code inspired by net/core/sock_diag.c.
Tested using kcapi-dgst from libkcapi [1]:
Before:
# unshare -n kcapi-dgst -c sha256 </dev/null | wc -c
libkcapi - Error: Netlink error: sendmsg failed
libkcapi - Error: Netlink error: sendmsg failed
libkcapi - Error: NETLINK_CRYPTO: cannot obtain cipher information for hmac(sha512) (is required crypto_user.c patch missing? see documentation)
0
After:
# unshare -n kcapi-dgst -c sha256 </dev/null | wc -c
32
[1] https://github.com/smuellerDD/libkcapi
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provide an accelerated implementation of aegis128 by wiring up the
SIMD hooks in the generic driver to an implementation based on NEON
intrinsics, which can be compiled to both ARM and arm64 code.
This results in a performance of 2.2 cycles per byte on Cortex-A53,
which is a performance increase of ~11x compared to the generic
code.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add some plumbing to allow the AEGIS128 code to be built with SIMD
routines for acceleration.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The generic AES code provides four sets of lookup tables, where each
set consists of four tables containing the same 32-bit values, but
rotated by 0, 8, 16 and 24 bits, respectively. This makes sense for
CISC architectures such as x86 which support memory operands, but
for other architectures, the rotates are quite cheap, and using all
four tables needlessly thrashes the D-cache, and actually hurts rather
than helps performance.
Since x86 already has its own implementation of AEGIS based on AES-NI
instructions, let's tweak the generic implementation towards other
architectures, and avoid the prerotated tables, and perform the
rotations inline. On ARM Cortex-A53, this results in a ~8% speedup.
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
TFM init/exit routines are optional, so no need to provide empty ones.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Three variants of AEGIS were proposed for the CAESAR competition, and
only one was selected for the final portfolio: AEGIS128.
The other variants, AEGIS128L and AEGIS256, are not likely to ever turn
up in networking protocols or other places where interoperability
between Linux and other systems is a concern, nor are they likely to
be subjected to further cryptanalysis. However, uninformed users may
think that AEGIS128L (which is faster) is equally fit for use.
So let's remove them now, before anyone starts using them and we are
forced to support them forever.
Note that there are no known flaws in the algorithms or in any of these
implementations, but they have simply outlived their usefulness.
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MORUS was not selected as a winner in the CAESAR competition, which
is not surprising since it is considered to be cryptographically
broken [0]. (Note that this is not an implementation defect, but a
flaw in the underlying algorithm). Since it is unlikely to be in use
currently, let's remove it before we're stuck with it.
[0] https://eprint.iacr.org/2019/172.pdf
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The versions of the AES lookup tables that are only used during the last
round are never used outside of the driver, so there is no need to
export their symbols.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop aes-generic's version of crypto_aes_expand_key(), and switch to
the key expansion routine provided by the AES library. AES key expansion
is not performance critical, and it is better to have a single version
shared by all AES implementations.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AES assembler code for x86 isn't actually faster than code
generated by the compiler from aes_generic.c, and considering
the disproportionate maintenance burden of assembler code on
x86, it is better just to drop it entirely. Modern x86 systems
will use AES-NI anyway, and given that the modules being removed
have a dependency on aes_generic already, we can remove them
without running the risk of regressions.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AES-NI code contains fallbacks for invocations that occur from a
context where the SIMD unit is unavailable, which really only occurs
when running in softirq context that was entered from a hard IRQ that
was taken while running kernel code that was already using the FPU.
That means performance is not really a consideration, and we can just
use the new library code for this use case, which has a smaller
footprint and is believed to be time invariant. This will allow us to
drop the non-SIMD asm routines in a subsequent patch.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Take the existing small footprint and mostly time invariant C code
and turn it into a AES library that can be used for non-performance
critical, casual use of AES, and as a fallback for, e.g., SIMD code
that needs a secondary path that can be taken in contexts where the
SIMD unit is off limits (e.g., in hard interrupts taken from kernel
context)
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The fixed time AES code mangles the key schedule so that xoring the
first round key with values at fixed offsets across the Sbox produces
the correct value. This primes the D-cache with the entire Sbox before
any data dependent lookups are done, making it more difficult to infer
key bits from timing variances when the plaintext is known.
The downside of this approach is that it renders the key schedule
incompatible with other implementations of AES in the kernel, which
makes it cumbersome to use this implementation as a fallback for SIMD
based AES in contexts where this is not allowed.
So let's tweak the fixed Sbox indexes so that they add up to zero under
the xor operation. While at it, increase the granularity to 16 bytes so
we cover the entire Sbox even on systems with 16 byte cachelines.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rename some local AES encrypt/decrypt routines so they don't clash with
the names we are about to introduce for the routines exposed by the
generic AES library.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Crypto test failures in FIPS mode cause an immediate panic, but
on some system the cryptographic boundary extends beyond just
the Linux controlled domain.
Add a simple atomic notification chain to allow interested parties
to register to receive notification prior to us kicking the bucket.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Here is the big USB and PHY driver pull request for 5.3-rc1.
Lots of stuff here, all of which has been in linux-next for a while with
no reported issues. Nothing is earth-shattering, just constant forward
progress for more devices supported and cleanups and small fixes:
- USB gadget driver updates and fixes
- new USB gadget driver for some hardware, followed by a quick revert
of those patches as they were not ready to be merged...
- PHY driver updates
- Lots of new driver additions and cleanups with a few fixes mixed in.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXSXjYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynMYACgnSRP3GylwMywrkc9paVmDeiIgNwAn0N2sika
JEW7C3lkBJZJ7R6V/Ynm
=drla
-----END PGP SIGNATURE-----
Merge tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / PHY updates from Greg KH:
"Here is the big USB and PHY driver pull request for 5.3-rc1.
Lots of stuff here, all of which has been in linux-next for a while
with no reported issues. Nothing is earth-shattering, just constant
forward progress for more devices supported and cleanups and small
fixes:
- USB gadget driver updates and fixes
- new USB gadget driver for some hardware, followed by a quick revert
of those patches as they were not ready to be merged...
- PHY driver updates
- Lots of new driver additions and cleanups with a few fixes mixed
in"
* tag 'usb-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (145 commits)
Revert "usb: gadget: storage: Remove warning message"
Revert "dt-bindings: add binding for USBSS-DRD controller."
Revert "usb:gadget Separated decoding functions from dwc3 driver."
Revert "usb:gadget Patch simplify usb_decode_set_clear_feature function."
Revert "usb:gadget Simplify usb_decode_get_set_descriptor function."
Revert "usb:cdns3 Add Cadence USB3 DRD Driver"
Revert "usb:cdns3 Fix for stuck packets in on-chip OUT buffer."
usb :fsl: Change string format for errata property
usb: host: Stops USB controller init if PLL fails to lock
usb: linux/fsl_device: Add platform member has_fsl_erratum_a006918
usb: phy: Workaround for USB erratum-A005728
usb: fsl: Set USB_EN bit to select ULPI phy
usb: Handle USB3 remote wakeup for LPM enabled devices correctly
drivers/usb/typec/tps6598x.c: fix 4CC cmd write
drivers/usb/typec/tps6598x.c: fix portinfo width
usb: storage: scsiglue: Do not skip VPD if try_vpd_pages is set
usb: renesas_usbhs: add a workaround for a race condition of workqueue
usb: gadget: udc: renesas_usb3: remove redundant assignment to ret
usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()
USB: gadget: function: fix issue Unneeded variable: "value"
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 5.3:
API:
- Test shash interface directly in testmgr
- cra_driver_name is now mandatory
Algorithms:
- Replace arc4 crypto_cipher with library helper
- Implement 5 way interleave for ECB, CBC and CTR on arm64
- Add xxhash
- Add continuous self-test on noise source to drbg
- Update jitter RNG
Drivers:
- Add support for SHA204A random number generator
- Add support for 7211 in iproc-rng200
- Fix fuzz test failures in inside-secure
- Fix fuzz test failures in talitos
- Fix fuzz test failures in qat"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits)
crypto: stm32/hash - remove interruptible condition for dma
crypto: stm32/hash - Fix hmac issue more than 256 bytes
crypto: stm32/crc32 - rename driver file
crypto: amcc - remove memset after dma_alloc_coherent
crypto: ccp - Switch to SPDX license identifiers
crypto: ccp - Validate the the error value used to index error messages
crypto: doc - Fix formatting of new crypto engine content
crypto: doc - Add parameter documentation
crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR
crypto: arm64/aes-ce - add 5 way interleave routines
crypto: talitos - drop icv_ool
crypto: talitos - fix hash on SEC1.
crypto: talitos - move struct talitos_edesc into talitos.h
lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE
crypto/NX: Set receive window credits to max number of CRBs in RxFIFO
crypto: asymmetric_keys - select CRYPTO_HASH where needed
crypto: serpent - mark __serpent_setkey_sbox noinline
crypto: testmgr - dynamically allocate crypto_shash
crypto: testmgr - dynamically allocate testvec_config
crypto: talitos - eliminate unneeded 'done' functions at build time
...
-----BEGIN PGP SIGNATURE-----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=Push
-----END PGP SIGNATURE-----
Merge tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring namespacing from David Howells:
"These patches help make keys and keyrings more namespace aware.
Firstly some miscellaneous patches to make the process easier:
- Simplify key index_key handling so that the word-sized chunks
assoc_array requires don't have to be shifted about, making it
easier to add more bits into the key.
- Cache the hash value in the key so that we don't have to calculate
on every key we examine during a search (it involves a bunch of
multiplications).
- Allow keying_search() to search non-recursively.
Then the main patches:
- Make it so that keyring names are per-user_namespace from the point
of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not
accessible cross-user_namespace.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this.
- Move the user and user-session keyrings to the user_namespace
rather than the user_struct. This prevents them propagating
directly across user_namespaces boundaries (ie. the KEY_SPEC_*
flags will only pick from the current user_namespace).
- Make it possible to include the target namespace in which the key
shall operate in the index_key. This will allow the possibility of
multiple keys with the same description, but different target
domains to be held in the same keyring.
keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this.
- Make it so that keys are implicitly invalidated by removal of a
domain tag, causing them to be garbage collected.
- Institute a network namespace domain tag that allows keys to be
differentiated by the network namespace in which they operate. New
keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned
the network domain in force when they are created.
- Make it so that the desired network namespace can be handed down
into the request_key() mechanism. This allows AFS, NFS, etc. to
request keys specific to the network namespace of the superblock.
This also means that the keys in the DNS record cache are
thenceforth namespaced, provided network filesystems pass the
appropriate network namespace down into dns_query().
For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other
cache keyrings, such as idmapper keyrings, also need to set the
domain tag - for which they need access to the network namespace of
the superblock"
* tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Pass the network namespace into request_key mechanism
keys: Network namespace domain tag
keys: Garbage collect keys for which the domain has been removed
keys: Include target namespace in match criteria
keys: Move the user and user-session keyrings to the user_namespace
keys: Namespace keyring names
keys: Add a 'recurse' flag for keyring searches
keys: Cache the hash value to avoid lots of recalculation
keys: Simplify key description management
Pull crypto fixes from Herbert Xu:
"This fixes two memory leaks and a list corruption bug"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: user - prevent operating on larval algorithms
crypto: cryptd - Fix skcipher instance memory leak
lib/mpi: Fix karactx leak in mpi_powm
Michal Suchanek reported [1] that running the pcrypt_aead01 test from
LTP [2] in a loop and holding Ctrl-C causes a NULL dereference of
alg->cra_users.next in crypto_remove_spawns(), via crypto_del_alg().
The test repeatedly uses CRYPTO_MSG_NEWALG and CRYPTO_MSG_DELALG.
The crash occurs when the instance that CRYPTO_MSG_DELALG is trying to
unregister isn't a real registered algorithm, but rather is a "test
larval", which is a special "algorithm" added to the algorithms list
while the real algorithm is still being tested. Larvals don't have
initialized cra_users, so that causes the crash. Normally pcrypt_aead01
doesn't trigger this because CRYPTO_MSG_NEWALG waits for the algorithm
to be tested; however, CRYPTO_MSG_NEWALG returns early when interrupted.
Everything else in the "crypto user configuration" API has this same bug
too, i.e. it inappropriately allows operating on larval algorithms
(though it doesn't look like the other cases can cause a crash).
Fix this by making crypto_alg_match() exclude larval algorithms.
[1] https://lkml.kernel.org/r/20190625071624.27039-1-msuchanek@suse.de
[2] https://github.com/linux-test-project/ltp/blob/20190517/testcases/kernel/crypto/pcrypt_aead01.c
Reported-by: Michal Suchanek <msuchanek@suse.de>
Fixes: a38f7907b9 ("crypto: Add userspace configuration API")
Cc: <stable@vger.kernel.org> # v3.2+
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
cryptd_skcipher_free() fails to free the struct skcipher_instance
allocated in cryptd_create_skcipher(), leading to a memory leak. This
is detected by kmemleak on bootup on ARM64 platforms:
unreferenced object 0xffff80003377b180 (size 1024):
comm "cryptomgr_probe", pid 822, jiffies 4294894830 (age 52.760s)
backtrace:
kmem_cache_alloc_trace+0x270/0x2d0
cryptd_create+0x990/0x124c
cryptomgr_probe+0x5c/0x1e8
kthread+0x258/0x318
ret_from_fork+0x10/0x1c
Fixes: 4e0958d19b ("crypto: cryptd - Add support for skcipher")
Cc: <stable@vger.kernel.org>
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Build testing with some core crypto options disabled revealed
a few modules that are missing CRYPTO_HASH:
crypto/asymmetric_keys/x509_public_key.o: In function `x509_get_sig_params':
x509_public_key.c:(.text+0x4c7): undefined reference to `crypto_alloc_shash'
x509_public_key.c:(.text+0x5e5): undefined reference to `crypto_shash_digest'
crypto/asymmetric_keys/pkcs7_verify.o: In function `pkcs7_digest.isra.0':
pkcs7_verify.c:(.text+0xab): undefined reference to `crypto_alloc_shash'
pkcs7_verify.c:(.text+0x1b2): undefined reference to `crypto_shash_digest'
pkcs7_verify.c:(.text+0x3c1): undefined reference to `crypto_shash_update'
pkcs7_verify.c:(.text+0x411): undefined reference to `crypto_shash_finup'
This normally doesn't show up in randconfig tests because there is
a large number of other options that select CRYPTO_HASH.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The same bug that gcc hit in the past is apparently now showing
up with clang, which decides to inline __serpent_setkey_sbox:
crypto/serpent_generic.c:268:5: error: stack frame size of 2112 bytes in function '__serpent_setkey' [-Werror,-Wframe-larger-than=]
Marking it 'noinline' reduces the stack usage from 2112 bytes to
192 and 96 bytes, respectively, and seems to generate more
useful object code.
Fixes: c871c10e4e ("crypto: serpent - improve __serpent_setkey with UBSAN")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The largest stack object in this file is now the shash descriptor.
Since there are many other stack variables, this can push it
over the 1024 byte warning limit, in particular with clang and
KASAN:
crypto/testmgr.c:1693:12: error: stack frame size of 1312 bytes in function '__alg_test_hash' [-Werror,-Wframe-larger-than=]
Make test_hash_vs_generic_impl() do the same thing as the
corresponding eaed and skcipher functions by allocating the
descriptor dynamically. We can still do better than this,
but it brings us well below the 1024 byte limit.
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 9a8a6b3f09 ("crypto: testmgr - fuzz hashes against their generic implementation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On arm32, we get warnings about high stack usage in some of the functions:
crypto/testmgr.c:2269:12: error: stack frame size of 1032 bytes in function 'alg_test_aead' [-Werror,-Wframe-larger-than=]
static int alg_test_aead(const struct alg_test_desc *desc, const char *driver,
^
crypto/testmgr.c:1693:12: error: stack frame size of 1312 bytes in function '__alg_test_hash' [-Werror,-Wframe-larger-than=]
static int __alg_test_hash(const struct hash_testvec *vecs,
^
On of the larger objects on the stack here is struct testvec_config, so
change that to dynamic allocation.
Fixes: 40153b10d9 ("crypto: testmgr - fuzz AEADs against their generic implementation")
Fixes: d435e10e67 ("crypto: testmgr - fuzz skciphers against their generic implementation")
Fixes: 9a8a6b3f09 ("crypto: testmgr - fuzz hashes against their generic implementation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a 'recurse' flag for keyring searches so that the flag can be omitted
and recursion disabled, thereby allowing just the nominated keyring to be
searched and none of the children.
Signed-off-by: David Howells <dhowells@redhat.com>
There are no remaining users of the cipher implementation, and there
are no meaningful ways in which the arc4 cipher can be combined with
templates other than ECB (and the way we do provide that combination
is highly dubious to begin with).
So let's drop the arc4 cipher altogether, and only keep the ecb(arc4)
skcipher, which is used in various places in the kernel.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Refactor the core rc4 handling so we can move most users to a library
interface, permitting us to drop the cipher interface entirely in a
future patch. This is part of an effort to simplify the crypto API
and improve its robustness against incorrect use.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The wusb code takes a very peculiar approach at implementing CBC-MAC,
by using plain CBC into a scratch buffer, and taking the output IV
as the MAC.
We can clean up this code substantially by switching to the cbcmac
shash, as exposed by the CCM template. To ensure that the module is
loaded on demand, add the cbcmac template name as a module alias.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Constify the ctx and iv arguments to crypto_chacha_init() and the
various chacha*_stream_xor() functions. This makes it clear that they
are not modified.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- Use sg_init_one() instead of sg_init_table() then sg_set_buf().
- Remove unneeded calls to sg_init_table() prior to scatterwalk_ffwd().
- Simplify initializing the poly tail block.
- Simplify computing padlen.
This doesn't change any actual behavior.
Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_skcipher_encrypt() and crypto_skcipher_decrypt() have grown to be
more than a single indirect function call. They now also check whether
a key has been set, and with CONFIG_CRYPTO_STATS=y they also update the
crypto statistics. That can add up to a lot of bloat at every call
site. Moreover, these always involve a function call anyway, which
greatly limits the benefits of inlining.
So change them to be non-inline.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_aead_encrypt() and crypto_aead_decrypt() have grown to be more
than a single indirect function call. They now also check whether a key
has been set, the decryption side checks whether the input is at least
as long as the authentication tag length, and with CONFIG_CRYPTO_STATS=y
they also update the crypto statistics. That can add up to a lot of
bloat at every call site. Moreover, these always involve a function
call anyway, which greatly limits the benefits of inlining.
So change them to be non-inline.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Call cond_resched() after each fuzz test iteration. This avoids stall
warnings if fuzz_iterations is set very high for testing purposes.
While we're at it, also call cond_resched() after finishing testing each
test vector.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all algorithms explicitly set cra_driver_name, make it required
for algorithm registration and remove the code that generated a default
cra_driver_name.
Also add an explicit check that cra_name is set too, since that's
obviously required too, yet it didn't seem to be checked anywhere.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Most generic crypto algorithms declare a driver name ending in
"-generic". The rest don't declare a driver name and instead rely on
the crypto API automagically appending "-generic" upon registration.
Having multiple conventions is unnecessarily confusing and makes it
harder to grep for all generic algorithms in the kernel source tree.
But also, allowing NULL driver names is problematic because sometimes
people fail to set it, e.g. the case fixed by commit 4179803643
("crypto: cavium/zip - fix collision with generic cra_driver_name").
Of course, people can also incorrectly name their drivers "-generic".
But that's much easier to notice / grep for.
Therefore, let's make cra_driver_name mandatory. In preparation for
this, this patch makes all generic algorithms set cra_driver_name.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPuGTg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykBvQCg2SG+HmDH+tlwKLT/q7jZcLMPQigAoMpt9Uuy
sxVEiFZo8ZU9v1IoRb1I
=qU++
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Another round of SPDX header file fixes for 5.2-rc4
These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being
added, based on the text in the files. We are slowly chipping away at
the 700+ different ways people tried to write the license text. All of
these were reviewed on the spdx mailing list by a number of different
people.
We now have over 60% of the kernel files covered with SPDX tags:
$ ./scripts/spdxcheck.py -v 2>&1 | grep Files
Files checked: 64533
Files with SPDX: 40392
Files with errors: 0
I think the majority of the "easy" fixups are now done, it's now the
start of the longer-tail of crazy variants to wade through"
* tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429
...
Pull crypto fixes from Herbert Xu:
"This fixes a regression that breaks the jitterentropy RNG and a
potential memory leak in hmac"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hmac - fix memory leak in hmac_init_tfm()
crypto: jitterentropy - change back to module_init()
Clear the CRYPTO_TFM_REQ_MAY_SLEEP flag when the chacha20poly1305
operation is being continued from an async completion callback, since
sleeping may not be allowed in that context.
This is basically the same bug that was recently fixed in the xts and
lrw templates. But, it's always been broken in chacha20poly1305 too.
This was found using syzkaller in combination with the updated crypto
self-tests which actually test the MAY_SLEEP flag now.
Reproducer:
python -c 'import socket; socket.socket(socket.AF_ALG, 5, 0).bind(
("aead", "rfc7539(cryptd(chacha20-generic),poly1305-generic)"))'
Kernel output:
BUG: sleeping function called from invalid context at include/crypto/algapi.h:426
in_atomic(): 1, irqs_disabled(): 0, pid: 1001, name: kworker/2:2
[...]
CPU: 2 PID: 1001 Comm: kworker/2:2 Not tainted 5.2.0-rc2 #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014
Workqueue: crypto cryptd_queue_worker
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x4d/0x6a lib/dump_stack.c:113
___might_sleep kernel/sched/core.c:6138 [inline]
___might_sleep.cold.19+0x8e/0x9f kernel/sched/core.c:6095
crypto_yield include/crypto/algapi.h:426 [inline]
crypto_hash_walk_done+0xd6/0x100 crypto/ahash.c:113
shash_ahash_update+0x41/0x60 crypto/shash.c:251
shash_async_update+0xd/0x10 crypto/shash.c:260
crypto_ahash_update include/crypto/hash.h:539 [inline]
poly_setkey+0xf6/0x130 crypto/chacha20poly1305.c:337
poly_init+0x51/0x60 crypto/chacha20poly1305.c:364
async_done_continue crypto/chacha20poly1305.c:78 [inline]
poly_genkey_done+0x15/0x30 crypto/chacha20poly1305.c:369
cryptd_skcipher_complete+0x29/0x70 crypto/cryptd.c:279
cryptd_skcipher_decrypt+0xcd/0x110 crypto/cryptd.c:339
cryptd_queue_worker+0x70/0xa0 crypto/cryptd.c:184
process_one_work+0x1ed/0x420 kernel/workqueue.c:2269
worker_thread+0x3e/0x3a0 kernel/workqueue.c:2415
kthread+0x11f/0x140 kernel/kthread.c:255
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
Fixes: 71ebc4d1b2 ("crypto: chacha20poly1305 - Add a ChaCha20-Poly1305 AEAD construction, RFC7539")
Cc: <stable@vger.kernel.org> # v4.2+
Cc: Martin Willi <martin@strongswan.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit c778f96bf3 ("crypto: lrw - Optimize tweak computation")
incorrectly reduced the alignmask of LRW instances from
'__alignof__(u64) - 1' to '__alignof__(__be32) - 1'.
However, xor_tweak() and setkey() assume that the data and key,
respectively, are aligned to 'be128', which has u64 alignment.
Fix the alignmask to be at least '__alignof__(be128) - 1'.
Fixes: c778f96bf3 ("crypto: lrw - Optimize tweak computation")
Cc: <stable@vger.kernel.org> # v4.20+
Cc: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Changing ghash_mod_init() to be subsys_initcall made it start running
before the alignment fault handler has been installed on ARM. In kernel
builds where the keys in the ghash test vectors happened to be
misaligned in the kernel image, this exposed the longstanding bug that
ghash_setkey() is incorrectly casting the key buffer (which can have any
alignment) to be128 for passing to gf128mul_init_4k_lle().
Fix this by memcpy()ing the key to a temporary buffer.
Don't fix it by setting an alignmask on the algorithm instead because
that would unnecessarily force alignment of the data too.
Fixes: 2cdc6899a8 ("crypto: ghash - Add GHASH digest algorithm for GCM")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
xxhash is currently implemented as a self-contained module in /lib.
This patch enables that module to be used as part of the generic kernel
crypto framework. It adds a simple wrapper to the 64bit version.
I've also added test vectors (with help from Nick Terrell). The upstream
xxhash code is tested by running hashing operation on random 222 byte
data with seed values of 0 and a prime number. The upstream test
suite can be found at https://github.com/Cyan4973/xxHash/blob/cf46e0c/xxhsum.c#L664
Essentially hashing is run on data of length 0,1,14,222 with the
aforementioned seed values 0 and prime 2654435761. The particular random
222 byte string was provided to me by Nick Terrell by reading
/dev/random and the checksums were calculated by the upstream xxsum
utility with the following bash script:
dd if=/dev/random of=TEST_VECTOR bs=1 count=222
for a in 0 1; do
for l in 0 1 14 222; do
for s in 0 2654435761; do
echo algo $a length $l seed $s;
head -c $l TEST_VECTOR | ~/projects/kernel/xxHash/xxhsum -H$a -s$s
done
done
done
This produces output as follows:
algo 0 length 0 seed 0
02cc5d05 stdin
algo 0 length 0 seed 2654435761
02cc5d05 stdin
algo 0 length 1 seed 0
25201171 stdin
algo 0 length 1 seed 2654435761
25201171 stdin
algo 0 length 14 seed 0
c1d95975 stdin
algo 0 length 14 seed 2654435761
c1d95975 stdin
algo 0 length 222 seed 0
b38662a6 stdin
algo 0 length 222 seed 2654435761
b38662a6 stdin
algo 1 length 0 seed 0
ef46db3751d8e999 stdin
algo 1 length 0 seed 2654435761
ac75fda2929b17ef stdin
algo 1 length 1 seed 0
27c3f04c2881203a stdin
algo 1 length 1 seed 2654435761
4a15ed26415dfe4d stdin
algo 1 length 14 seed 0
3d33dc700231dfad stdin
algo 1 length 14 seed 2654435761
ea5f7ddef9a64f80 stdin
algo 1 length 222 seed 0
5f3d3c08ec2bef34 stdin
algo 1 length 222 seed 2654435761
6a9df59664c7ed62 stdin
algo 1 is xx64 variant, algo 0 is the 32 bit variant which is currently
not hooked up.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The Jitter RNG implementation is updated to comply with upstream version
2.1.2. The change covers the following aspects:
* Time variation measurement is conducted over the LFSR operation
instead of the XOR folding
* Invcation of stuck test during initialization
* Removal of the stirring functionality and the Von-Neumann
unbiaser as the LFSR using a primitive and irreducible polynomial
generates an identical distribution of random bits
This implementation was successfully used in FIPS 140-2 validations
as well as in German BSI evaluations.
This kernel implementation was tested as follows:
* The unchanged kernel code file jitterentropy.c is compiled as part
of user space application to generate raw unconditioned noise
data. That data is processed with the NIST SP800-90B non-IID test
tool to verify that the kernel code exhibits an equal amount of noise
as the upstream Jitter RNG version 2.1.2.
* Using AF_ALG with the libkcapi tool of kcapi-rng the Jitter RNG was
output tested with dieharder to verify that the output does not
exhibit statistical weaknesses. The following command was used:
kcapi-rng -n "jitterentropy_rng" -b 100000000000 | dieharder -a -g 200
* The unchanged kernel code file jitterentropy.c is compiled as part
of user space application to test the LFSR implementation. The
LFSR is injected a monotonically increasing counter as input and
the output is fed into dieharder to verify that the LFSR operation
does not exhibit statistical weaknesses.
* The patch was tested on the Muen separation kernel which returns
a more coarse time stamp to verify that the Jitter RNG does not cause
regressions with its initialization test considering that the Jitter
RNG depends on a high-resolution timer.
Tested-by: Reto Buerki <reet@codelabs.ch>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For hash algorithms implemented using the "shash" algorithm type, test
both the ahash and shash APIs, not just the ahash API.
Testing the ahash API already tests the shash API indirectly, which is
normally good enough. However, there have been corner cases where there
have been shash bugs that don't get exposed through the ahash API. So,
update testmgr to test the shash API too.
This would have detected the arm64 SHA-1 and SHA-2 bugs for which fixes
were just sent out (https://patchwork.kernel.org/patch/10964843/ and
https://patchwork.kernel.org/patch/10965089/):
alg: shash: sha1-ce test failed (wrong result) on test vector 0, cfg="init+finup aligned buffer"
alg: shash: sha224-ce test failed (wrong result) on test vector 0, cfg="init+finup aligned buffer"
alg: shash: sha256-ce test failed (wrong result) on test vector 0, cfg="init+finup aligned buffer"
This also would have detected the bugs fixed by commit 307508d107
("crypto: crct10dif-generic - fix use via crypto_shash_digest()") and
commit dec3d0b107
("crypto: x86/crct10dif-pcl - fix use via crypto_shash_digest()").
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 246 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 51 franklin st fifth floor boston ma 02110
1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 111 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of gnu general public license as published by the
free software foundation either version 2 of the license or at your
option any later version you should have received a copy of the gnu
general public license along with this program if not see http www
gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 2 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190524100844.276644418@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the crypto_tfm_in_queue() function, which is unused.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the unnecessary constant CRYPTO_ALG_TYPE_DIGEST, which has the
same value as CRYPTO_ALG_TYPE_HASH.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
kcrypto_wq is only used by cryptd, so move it into cryptd.c and change
the workqueue name from "crypto" to "cryptd".
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There's no reason for users to select CONFIG_CRYPTO_GF128MUL, since it's
just some helper functions, and algorithms that need it select it.
Remove the prompt string so that it's not shown to users.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
echainiv is the only algorithm or template in the crypto API that is
enabled by default. But there doesn't seem to be a good reason for it.
And it pulls in a lot of stuff as dependencies, like AEAD support and a
"NIST SP800-90A DRBG" including HMAC-SHA256.
The commit which made it default 'm', commit 3491244c62 ("crypto:
echainiv - Set Kconfig default to m"), mentioned that it's needed for
IPsec. However, later commit 32b6170ca5 ("ipv4+ipv6: Make INET*_ESP
select CRYPTO_ECHAINIV") made the IPsec kconfig options select it.
So, remove the 'default m'.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "cryptomgr" module is required for templates to be used. Many
templates select it, but others don't. Make all templates select it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The crypto self-tests are part of the "cryptomgr" module, which can
technically be disabled (though it rarely is). If you do so, currently
you can still enable CRYPTO_MANAGER_EXTRA_TESTS, which doesn't make
sense since in that case testmgr.c isn't compiled at all. Fix it by
making it CRYPTO_MANAGER_EXTRA_TESTS depend on CRYPTO_MANAGER2, like
CRYPTO_MANAGER_DISABLE_TESTS already does.
Fixes: 5b2706a4d4 ("crypto: testmgr - introduce CONFIG_CRYPTO_MANAGER_EXTRA_TESTS")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On PowerPC with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y, there is sometimes
a crash in generate_random_aead_testvec(). The problem is that the
generated test vectors use data lengths of up to about 2 * PAGE_SIZE,
which is 128 KiB on PowerPC; however, the data length fields in the test
vectors are 'unsigned short', so the lengths get truncated. Fix this by
changing the relevant fields to 'unsigned int'.
Fixes: 40153b10d9 ("crypto: testmgr - fuzz AEADs against their generic implementation")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When I added the sanity check of 'descsize', I missed that the child
hash tfm needs to be freed if the sanity check fails. Of course this
should never happen, hence the use of WARN_ON(), but it should be fixed.
Fixes: e1354400b2 ("crypto: hash - fix incorrect HASH_MAX_DESCSIZE")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
"jitterentropy_rng" doesn't have any other implementations, nor is it
tested by the crypto self-tests. So it was unnecessary to change it to
subsys_initcall. Also it depends on the main clocksource being
initialized, which may happen after subsys_initcall, causing this error:
jitterentropy: Initialization failed with host not compliant with requirements: 2
Change it back to module_init().
Fixes: c4741b2305 ("crypto: run initcalls for generic implementations earlier")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
51 franklin st fifth floor boston ma 02110 1301 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 50 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version you should have received a copy of the gnu general
public license for example usr src linux copying if not write to the
free software foundation inc 675 mass ave cambridge ma 02139 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 20 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170858.552543146@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 or at your option any
later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 11 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170858.370933192@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of gnu general public license as published by the
free software foundation either version 2 of the license or at your
option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170858.279640225@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170858.098509240@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public licence as published by
the free software foundation either version 2 of the licence or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 114 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa the full gnu
general public license is included in this distribution in the file
called copying
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 7 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.277062491@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FIPS 140-2 section 4.9.2 requires a continuous self test of the noise
source. Up to kernel 4.8 drivers/char/random.c provided this continuous
self test. Afterwards it was moved to a location that is inconsistent
with the FIPS 140-2 requirements. The relevant patch was
e192be9d9a .
Thus, the FIPS 140-2 CTRNG is added to the DRBG when it obtains the
seed. This patch resurrects the function drbg_fips_continous_test that
existed some time ago and applies it to the noise sources. The patch
that removed the drbg_fips_continous_test was
b361476305 .
The Jitter RNG implements its own FIPS 140-2 self test and thus does not
need to be subjected to the test in the DRBG.
The patch contains a tiny fix to ensure proper zeroization in case of an
error during the Jitter RNG data gathering.
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Here are series of patches that add SPDX tags to different kernel files,
based on two different things:
- SPDX entries are added to a bunch of files that we missed a year ago
that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the last
big sweep, or they were Makefile/Kconfig files, which we didn't
touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the next
few weeks as the tools and reviewers crunch through the more "odd"
variants of how to say "GPLv2" that developers have come up with over
the years, combined with other fun oddities (GPL + a BSD disclaimer?)
that are being unearthed, with the goal for the whole kernel to be
cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOP8uw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynmGQCgy3evqzleuOITDpuWaxewFdHqiJYAnA7KRw4H
1KwtfRnMtG6dk/XaS7H7
=O9lH
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull SPDX update from Greg KH:
"Here is a series of patches that add SPDX tags to different kernel
files, based on two different things:
- SPDX entries are added to a bunch of files that we missed a year
ago that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the
last big sweep, or they were Makefile/Kconfig files, which we
didn't touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the
next few weeks as the tools and reviewers crunch through the more
"odd" variants of how to say "GPLv2" that developers have come up with
over the years, combined with other fun oddities (GPL + a BSD
disclaimer?) that are being unearthed, with the goal for the whole
kernel to be cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches"
* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
...
Pull crypto fixes from Herbert Xu:
- Two long-standing bugs in the powerpc assembly of vmx
- Stack overrun caused by HASH_MAX_DESCSIZE being too small
- Regression in caam
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: vmx - ghash: do nosimd fallback manually
crypto: vmx - CTR: always increment IV as quadword
crypto: hash - fix incorrect HASH_MAX_DESCSIZE
crypto: caam - fix typo in i.MX6 devices list for errata
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see http www gnu org licenses
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details [based]
[from] [clk] [highbank] [c] you should have received a copy of the
gnu general public license along with this program if not see http
www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 355 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The "hmac(sha3-224-generic)" algorithm has a descsize of 368 bytes,
which is greater than HASH_MAX_DESCSIZE (360) which is only enough for
sha3-224-generic. The check in shash_prepare_alg() doesn't catch this
because the HMAC template doesn't set descsize on the algorithms, but
rather sets it on each individual HMAC transform.
This causes a stack buffer overflow when SHASH_DESC_ON_STACK() is used
with hmac(sha3-224-generic).
Fix it by increasing HASH_MAX_DESCSIZE to the real maximum. Also add a
sanity check to hmac_init().
This was detected by the improved crypto self-tests in v5.2, by loading
the tcrypt module with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y enabled. I
didn't notice this bug when I ran the self-tests by requesting the
algorithms via AF_ALG (i.e., not using tcrypt), probably because the
stack layout differs in the two cases and that made a difference here.
KASAN report:
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:359 [inline]
BUG: KASAN: stack-out-of-bounds in shash_default_import+0x52/0x80 crypto/shash.c:223
Write of size 360 at addr ffff8880651defc8 by task insmod/3689
CPU: 2 PID: 3689 Comm: insmod Tainted: G E 5.1.0-10741-g35c99ffa20edd #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x86/0xc5 lib/dump_stack.c:113
print_address_description+0x7f/0x260 mm/kasan/report.c:188
__kasan_report+0x144/0x187 mm/kasan/report.c:317
kasan_report+0x12/0x20 mm/kasan/common.c:614
check_memory_region_inline mm/kasan/generic.c:185 [inline]
check_memory_region+0x137/0x190 mm/kasan/generic.c:191
memcpy+0x37/0x50 mm/kasan/common.c:125
memcpy include/linux/string.h:359 [inline]
shash_default_import+0x52/0x80 crypto/shash.c:223
crypto_shash_import include/crypto/hash.h:880 [inline]
hmac_import+0x184/0x240 crypto/hmac.c:102
hmac_init+0x96/0xc0 crypto/hmac.c:107
crypto_shash_init include/crypto/hash.h:902 [inline]
shash_digest_unaligned+0x9f/0xf0 crypto/shash.c:194
crypto_shash_digest+0xe9/0x1b0 crypto/shash.c:211
generate_random_hash_testvec.constprop.11+0x1ec/0x5b0 crypto/testmgr.c:1331
test_hash_vs_generic_impl+0x3f7/0x5c0 crypto/testmgr.c:1420
__alg_test_hash+0x26d/0x340 crypto/testmgr.c:1502
alg_test_hash+0x22e/0x330 crypto/testmgr.c:1552
alg_test.part.7+0x132/0x610 crypto/testmgr.c:4931
alg_test+0x1f/0x40 crypto/testmgr.c:4952
Fixes: b68a7ec1e9 ("crypto: hash - Remove VLA usage")
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Cc: <stable@vger.kernel.org> # v4.20+
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull networking updates from David Miller:
"Highlights:
1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.
2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.
3) Make flow classifier more lockless, from Vlad Buslov.
4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.
5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.
6) Partial GSO offload support in XFRM, from Boris Pismenny.
7) Add fast link down support to ethtool, from Heiner Kallweit.
8) Use siphash for IP ID generator, from Eric Dumazet.
9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.
10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.
11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.
12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.
13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.
14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.
15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.
16) Remove SKB list implementation assumptions in SCTP, your's truly.
17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.
18) Add memory accounting on TX and RX path of SCTP, from Xin Long.
19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.
20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.
21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.
22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.
23) Allow DSA tag drivers to be modular, from Andrew Lunn.
24) Remove legacy DSA probing support, also from Andrew Lunn.
25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.
26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.
27) More indirect call optimizations, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...
Pull crypto update from Herbert Xu:
"API:
- Add support for AEAD in simd
- Add fuzz testing to testmgr
- Add panic_on_fail module parameter to testmgr
- Use per-CPU struct instead multiple variables in scompress
- Change verify API for akcipher
Algorithms:
- Convert x86 AEAD algorithms over to simd
- Forbid 2-key 3DES in FIPS mode
- Add EC-RDSA (GOST 34.10) algorithm
Drivers:
- Set output IV with ctr-aes in crypto4xx
- Set output IV in rockchip
- Fix potential length overflow with hashing in sun4i-ss
- Fix computation error with ctr in vmx
- Add SM4 protected keys support in ccree
- Remove long-broken mxc-scc driver
- Add rfc4106(gcm(aes)) cipher support in cavium/nitrox"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits)
crypto: ccree - use a proper le32 type for le32 val
crypto: ccree - remove set but not used variable 'du_size'
crypto: ccree - Make cc_sec_disable static
crypto: ccree - fix spelling mistake "protedcted" -> "protected"
crypto: caam/qi2 - generate hash keys in-place
crypto: caam/qi2 - fix DMA mapping of stack memory
crypto: caam/qi2 - fix zero-length buffer DMA mapping
crypto: stm32/cryp - update to return iv_out
crypto: stm32/cryp - remove request mutex protection
crypto: stm32/cryp - add weak key check for DES
crypto: atmel - remove set but not used variable 'alg_name'
crypto: picoxcell - Use dev_get_drvdata()
crypto: crypto4xx - get rid of redundant using_sd variable
crypto: crypto4xx - use sync skcipher for fallback
crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues
crypto: crypto4xx - fix ctr-aes missing output IV
crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA
crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o
crypto: ccree - handle tee fips error during power management resume
crypto: ccree - add function to handle cryptocell tee fips error
...
We currently have two levels of strict validation:
1) liberal (default)
- undefined (type >= max) & NLA_UNSPEC attributes accepted
- attribute length >= expected accepted
- garbage at end of message accepted
2) strict (opt-in)
- NLA_UNSPEC attributes accepted
- attribute length >= expected accepted
Split out parsing strictness into four different options:
* TRAILING - check that there's no trailing data after parsing
attributes (in message or nested)
* MAXTYPE - reject attrs > max known type
* UNSPEC - reject attributes with NLA_UNSPEC policy entries
* STRICT_ATTRS - strictly validate attribute size
The default for future things should be *everything*.
The current *_strict() is a combination of TRAILING and MAXTYPE,
and is renamed to _deprecated_strict().
The current regular parsing has none of this, and is renamed to
*_parse_deprecated().
Additionally it allows us to selectively set one of the new flags
even on old policies. Notably, the UNSPEC flag could be useful in
this case, since it can be arranged (by filling in the policy) to
not be an incompatible userspace ABI change, but would then going
forward prevent forgetting attribute entries. Similar can apply
to the POLICY flag.
We end up with the following renames:
* nla_parse -> nla_parse_deprecated
* nla_parse_strict -> nla_parse_deprecated_strict
* nlmsg_parse -> nlmsg_parse_deprecated
* nlmsg_parse_strict -> nlmsg_parse_deprecated_strict
* nla_parse_nested -> nla_parse_nested_deprecated
* nla_validate_nested -> nla_validate_nested_deprecated
Using spatch, of course:
@@
expression TB, MAX, HEAD, LEN, POL, EXT;
@@
-nla_parse(TB, MAX, HEAD, LEN, POL, EXT)
+nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT)
@@
expression NLH, HDRLEN, TB, MAX, POL, EXT;
@@
-nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT)
+nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT)
@@
expression NLH, HDRLEN, TB, MAX, POL, EXT;
@@
-nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
+nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
@@
expression TB, MAX, NLA, POL, EXT;
@@
-nla_parse_nested(TB, MAX, NLA, POL, EXT)
+nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT)
@@
expression START, MAX, POL, EXT;
@@
-nla_validate_nested(START, MAX, POL, EXT)
+nla_validate_nested_deprecated(START, MAX, POL, EXT)
@@
expression NLH, HDRLEN, MAX, POL, EXT;
@@
-nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT)
+nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT)
For this patch, don't actually add the strict, non-renamed versions
yet so that it breaks compile if I get it wrong.
Also, while at it, make nla_validate and nla_parse go down to a
common __nla_validate_parse() function to avoid code duplication.
Ultimately, this allows us to have very strict validation for every
new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the
next patch, while existing things will continue to work as is.
In effect then, this adds fully strict validation for any new command.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix undefined symbol issue in ecrdsa_generic module when ASN1
or OID_REGISTRY aren't enabled in the config by selecting these
options for CRYPTO_ECRDSA.
ERROR: "asn1_ber_decoder" [crypto/ecrdsa_generic.ko] undefined!
ERROR: "look_up_OID" [crypto/ecrdsa_generic.ko] undefined!
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mark sm4 and missing aes using protected keys which are indetical to
same algs with no HW protected keys as tested.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The flags field in 'struct shash_desc' never actually does anything.
The only ostensibly supported flag is CRYPTO_TFM_REQ_MAY_SLEEP.
However, no shash algorithm ever sleeps, making this flag a no-op.
With this being the case, inevitably some users who can't sleep wrongly
pass MAY_SLEEP. These would all need to be fixed if any shash algorithm
actually started sleeping. For example, the shash_ahash_*() functions,
which wrap a shash algorithm with the ahash API, pass through MAY_SLEEP
from the ahash API to the shash API. However, the shash functions are
called under kmap_atomic(), so actually they're assumed to never sleep.
Even if it turns out that some users do need preemption points while
hashing large buffers, we could easily provide a helper function
crypto_shash_update_large() which divides the data into smaller chunks
and calls crypto_shash_update() and cond_resched() for each chunk. It's
not necessary to have a flag in 'struct shash_desc', nor is it necessary
to make individual shash algorithms aware of this at all.
Therefore, remove shash_desc::flags, and document that the
crypto_shash_*() functions can be called from any context.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Eric Biggers
Herbert Xu
Linus Torvalds
Daniel Jordan
Kees Cook
Pankaj Bharadiya
Chen Wandun
David Sterba
Ard Biesheuvel
Corentin Labbe
Jason A. Donenfeld
Tian Tao
Sumit Garg
Ard Biesheuvel
Ben Dooks
Navid Emamdoost
Ayush Sawal
Alexander E. Patrakov
Pascal van Leeuwen
Hans de Goede
YueHaibing
Jiri Bohac
Chuhong Yuan
Iuliana Prodan
Peter Zijlstra
Thiago Jung Bauermann
Arnd Bergmann
Ondrej Mosnacek
Hannah Pan
Gilad Ben-Yossef
Vincent Whitchurch
David Howells
Greg Kroah-Hartman
Thomas Gleixner
Nikolay Borisov
Stephan Müller
David S. Miller
Johannes Berg
Vitaly Chikunov