Unrolling the LOAD and BLEND loops improves performance by ~8% on x86_64
(tested on Broadwell Xeon) while not increasing code size too much.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This reduces code size substantially (on x86_64 with gcc-10 the size of
sha256_update() goes from 7593 bytes to 1952 bytes including the new
SHA256_K array), and on x86 is slightly faster than the full unroll
(tested on Broadwell Xeon).
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The temporary W[] array is currently zeroed out once every call to
sha256_transform(), i.e. once every 64 bytes of input data. Moving it to
sha256_update() instead so that it is cleared only once per update can
save about 2-3% of the total time taken to compute the digest, with a
reasonable memset() implementation, and considerably more (~20%) with a
bad one (eg the x86 purgatory currently uses a memset() coded in C).
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The assignments to clear a through h and t1/t2 are optimized out by the
compiler because they are unused after the assignments.
Clearing individual scalar variables is unlikely to be useful, as they
may have been assigned to registers, and even if stack spilling was
required, there may be compiler-generated temporaries that are
impossible to clear in any case.
So drop the clearing of a through h and t1/t2.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Without the barrier_data() inside memzero_explicit(), the compiler may
optimize away the state-clearing if it can tell that the state is not
used afterwards. At least in lib/crypto/sha256.c:__sha256_final(), the
function can get inlined into sha256(), in which case the memset is
optimized away.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The scalar_copied variable is not as the scalar is never copied
in that block. This patch removes it.
Fixes: d58bb7e55a ("lib/mpi: Introduce ec implementation to...")
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
sg_copy_buffer() returns a size_t with the number of bytes copied.
Return 0 instead of false if the copy is skipped.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is the cleanup of the latest series of prandom_u32 experimentations
consisting in using SipHash instead of Tausworthe to produce the randoms
used by the network stack. The changes to the files were kept minimal,
and the controversial commit that used to take noise from the fast_pool
(f227e3ec3b) was reverted. Instead, a dedicated "net_rand_noise" per_cpu
variable is fed from various sources of activities (networking, scheduling)
to perturb the SipHash state using fast, non-trivially predictable data,
instead of keeping it fully deterministic. The goal is essentially to make
any occasional memory leakage or brute-force attempt useless.
The resulting code was verified to be very slightly faster on x86_64 than
what is was with the controversial commit above, though this remains barely
above measurement noise. It was also tested on i386 and arm, and build-
tested only on arm64.
The whole discussion around this is archived here:
https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJflHDtAAoJEE44bZycYXAvxXUP/A9aKCaSnJUgYi/0Fa507bi9
yJkNs6cotQfzmG8GznQWdG2mdsviqI/d08UdIHD9JHKoin3wcT4+0So546pCw9BR
tlrHnFcRnqEqXFLggnqkKnnIgGNNTppMDSi96BplNoXYXAMRjjvKW9Vl94lU2Abk
a+aOOJRu4Vzj/5tRT3fkg/ldN6YGZ6nbqVkzd0WAwuYYIj1VSYUSkLgKc65n+4Xp
ISnVWObeHJ+tnBRDVudTaUNYi7T3QvCF9glZZlFUVBDQbTRSqjMBSUmnBnOg1mhO
Q5nY6xrfTi/0i39+/wOUUOTaxe7YggymibQfN+Y26w1rPO45RkvORiPKvXlfZWaI
a3wh1TMoDAptrW9VXiO9pJv6a4xC16c7FyyTnGkP4jP+HTFdgmgixoNmPKrBxuEZ
X8O+HOSf155j057aECMivk8bIj4FfLmYt2ciWqRZTVCwu9uK29AJSMx0SphTmYQ0
p0HaJ8mHKnFVViX9n+YOPRfZDIRGH1zTOxzPhEkzuX8vx/4uiXsbp/ILxg0uZ913
DgMk1rzzBlZsL7QqJQnf9JM810pFcU/PI7Y7PKaGKz3ntkJT2WV7gMeg+Wwv9254
pPccvffYzdbtJAHgj+If8lHwixE33u5RscXqjpxIWLPcKTOLQNIf+6bRQ86sA+Kq
Vbza8sDu6IWhvApCGLmB
=KHhI
-----END PGP SIGNATURE-----
Merge tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom
Pull random32 updates from Willy Tarreau:
"Make prandom_u32() less predictable.
This is the cleanup of the latest series of prandom_u32
experimentations consisting in using SipHash instead of Tausworthe to
produce the randoms used by the network stack.
The changes to the files were kept minimal, and the controversial
commit that used to take noise from the fast_pool (f227e3ec3b) was
reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is
fed from various sources of activities (networking, scheduling) to
perturb the SipHash state using fast, non-trivially predictable data,
instead of keeping it fully deterministic. The goal is essentially to
make any occasional memory leakage or brute-force attempt useless.
The resulting code was verified to be very slightly faster on x86_64
than what is was with the controversial commit above, though this
remains barely above measurement noise. It was also tested on i386 and
arm, and build- tested only on arm64"
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
* tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom:
random32: add a selftest for the prandom32 code
random32: add noise from network and scheduling activity
random32: make prandom_u32() output unpredictable
-----BEGIN PGP SIGNATURE-----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=dFJi
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph
- rdma error handling fixes (Chao Leng)
- fc error handling and reconnect fixes (James Smart)
- fix the qid displace when tracing ioctl command (Keith Busch)
- don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni)
- fix MTDT for passthru (Logan Gunthorpe)
- blacklist Write Same on more devices (Kai-Heng Feng)
- fix an uninitialized work struct (zhenwei pi)"
- lightnvm out-of-bounds fix (Colin)
- SG allocation leak fix (Doug)
- rnbd fixes (Gioh, Guoqing, Jack)
- zone error translation fixes (Keith)
- kerneldoc markup fix (Mauro)
- zram lockdep fix (Peter)
- Kill unused io_context members (Yufen)
- NUMA memory allocation cleanup (Xianting)
- NBD config wakeup fix (Xiubo)
* tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits)
block: blk-mq: fix a kernel-doc markup
nvme-fc: shorten reconnect delay if possible for FC
nvme-fc: wait for queues to freeze before calling update_hr_hw_queues
nvme-fc: fix error loop in create_hw_io_queues
nvme-fc: fix io timeout to abort I/O
null_blk: use zone status for max active/open
nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru
nvmet: cleanup nvmet_passthru_map_sg()
nvmet: limit passthru MTDS by BIO_MAX_PAGES
nvmet: fix uninitialized work for zero kato
nvme-pci: disable Write Zeroes on Sandisk Skyhawk
nvme: use queuedata for nvme_req_qid
nvme-rdma: fix crash due to incorrect cqe
nvme-rdma: fix crash when connect rejected
block: remove unused members for io_context
blk-mq: remove the calling of local_memory_node()
zram: Fix __zram_bvec_{read,write}() locking order
skd_main: remove unused including <linux/version.h>
sgl_alloc_order: fix memory leak
lightnvm: fix out-of-bounds write to array devices->info[]
...
Given that this code is new, let's add a selftest for it as well.
It doesn't rely on fixed sets, instead it picks 1024 numbers and
verifies that they're not more correlated than desired.
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
Cc: George Spelvin <lkml@sdf.org>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
With the removal of the interrupt perturbations in previous random32
change (random32: make prandom_u32() output unpredictable), the PRNG
has become 100% deterministic again. While SipHash is expected to be
way more robust against brute force than the previous Tausworthe LFSR,
there's still the risk that whoever has even one temporary access to
the PRNG's internal state is able to predict all subsequent draws till
the next reseed (roughly every minute). This may happen through a side
channel attack or any data leak.
This patch restores the spirit of commit f227e3ec3b ("random32: update
the net random state on interrupt and activity") in that it will perturb
the internal PRNG's statee using externally collected noise, except that
it will not pick that noise from the random pool's bits nor upon
interrupt, but will rather combine a few elements along the Tx path
that are collectively hard to predict, such as dev, skb and txq
pointers, packet length and jiffies values. These ones are combined
using a single round of SipHash into a single long variable that is
mixed with the net_rand_state upon each invocation.
The operation was inlined because it produces very small and efficient
code, typically 3 xor, 2 add and 2 rol. The performance was measured
to be the same (even very slightly better) than before the switch to
SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC
(i40e), the connection rate dropped from 556k/s to 555k/s while the
SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps.
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
Cc: George Spelvin <lkml@sdf.org>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Non-cryptographic PRNGs may have great statistical properties, but
are usually trivially predictable to someone who knows the algorithm,
given a small sample of their output. An LFSR like prandom_u32() is
particularly simple, even if the sample is widely scattered bits.
It turns out the network stack uses prandom_u32() for some things like
random port numbers which it would prefer are *not* trivially predictable.
Predictability led to a practical DNS spoofing attack. Oops.
This patch replaces the LFSR with a homebrew cryptographic PRNG based
on the SipHash round function, which is in turn seeded with 128 bits
of strong random key. (The authors of SipHash have *not* been consulted
about this abuse of their algorithm.) Speed is prioritized over security;
attacks are rare, while performance is always wanted.
Replacing all callers of prandom_u32() is the quick fix.
Whether to reinstate a weaker PRNG for uses which can tolerate it
is an open question.
Commit f227e3ec3b ("random32: update the net random state on interrupt
and activity") was an earlier attempt at a solution. This patch replaces
it.
Reported-by: Amit Klein <aksecurity@gmail.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Fixes: f227e3ec3b ("random32: update the net random state on interrupt and activity")
Signed-off-by: George Spelvin <lkml@sdf.org>
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
[ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions
to prandom.h for later use; merged George's prandom_seed() proposal;
inlined siprand_u32(); replaced the net_rand_state[] array with 4
members to fix a build issue; cosmetic cleanups to make checkpatch
happy; fixed RANDOM32_SELFTEST build ]
Signed-off-by: Willy Tarreau <w@1wt.eu>
fbcon/fonts:
- Two patches to prevent OOB access
ttm:
- fix for evicition value range check
amdgpu:
- Sienna Cichlid fixes
- MST manager resource leak fix
- GPU reset fix
amdkfd:
- Luxmark fix for Navi1x
i915:
- Tweak initial DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)
-----BEGIN PGP SIGNATURE-----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=rAUM
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-10-23' of git://anongit.freedesktop.org/drm/drm
Pull more drm fixes from Dave Airlie:
"This should be the last round of things for rc1, a bunch of i915
fixes, some amdgpu, more font OOB fixes and one ttm fix just found
reading code:
fbcon/fonts:
- Two patches to prevent OOB access
ttm:
- fix for evicition value range check
amdgpu:
- Sienna Cichlid fixes
- MST manager resource leak fix
- GPU reset fix
amdkfd:
- Luxmark fix for Navi1x
i915:
- Tweak initial DPCD backlight.enabled value (Sean)
- Initialize reserved MOCS indices (Ayaz)
- Mark initial fb obj as WT on eLLC machines to avoid rcu lockup (Ville)
- Support parsing of oversize batches (Chris)
- Delay execlists processing for TGL (Chris)
- Use the active reference on the vma during error capture (Chris)
- Widen CSB pointer (Chris)
- Wait for CSB entries on TGL (Chris)
- Fix unwind for scratch page allocation (Chris)
- Exclude low patches of stolen memory (Chris)
- Force VT'd workarounds when running as a guest OS (Chris)
- Drop runtime-pm assert from vpgu io accessors (Chris)"
* tag 'drm-next-2020-10-23' of git://anongit.freedesktop.org/drm/drm: (31 commits)
drm/amdgpu: correct the cu and rb info for sienna cichlid
drm/amd/pm: remove the average clock value in sysfs
drm/amd/pm: fix pp_dpm_fclk
Revert drm/amdgpu: disable sienna chichlid UMC RAS
drm/amd/pm: fix pcie information for sienna cichlid
drm/amdkfd: Use same SQ prefetch setting as amdgpu
drm/amd/swsmu: correct wrong feature bit mapping
drm/amd/psp: Fix sysfs: cannot create duplicate filename
drm/amd/display: Avoid MST manager resource leak.
drm/amd/display: Revert "drm/amd/display: Fix a list corruption"
drm/amdgpu: update golden setting for sienna_cichlid
drm/amd/swsmu: add missing feature map for sienna_cichlid
drm/amdgpu: correct the gpu reset handling for job != NULL case
drm/amdgpu: add rlc iram and dram firmware support
drm/amdgpu: add function to program pbb mode for sienna cichlid
drm/i915: Drop runtime-pm assert from vgpu io accessors
drm/i915: Force VT'd workarounds when running as a guest OS
drm/i915: Exclude low pages (128KiB) of stolen from use
drm/i915/gt: Onion unwind for scratch page allocation failure
drm/ttm: fix eviction valuable range check.
...
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the module
linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=tZRN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Support 'make compile_commands.json' to generate the compilation
database more easily, avoiding stale entries
- Support 'make clang-analyzer' and 'make clang-tidy' for static checks
using clang-tidy
- Preprocess scripts/modules.lds.S to allow CONFIG options in the
module linker script
- Drop cc-option tests from compiler flags supported by our minimal
GCC/Clang versions
- Use always 12-digits commit hash for CONFIG_LOCALVERSION_AUTO=y
- Use sha1 build id for both BFD linker and LLD
- Improve deb-pkg for reproducible builds and rootless builds
- Remove stale, useless scripts/namespace.pl
- Turn -Wreturn-type warning into error
- Fix build error of deb-pkg when CONFIG_MODULES=n
- Replace 'hostname' command with more portable 'uname -n'
- Various Makefile cleanups
* tag 'kbuild-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: Use uname for LINUX_COMPILE_HOST detection
kbuild: Only add -fno-var-tracking-assignments for old GCC versions
kbuild: remove leftover comment for filechk utility
treewide: remove DISABLE_LTO
kbuild: deb-pkg: clean up package name variables
kbuild: deb-pkg: do not build linux-headers package if CONFIG_MODULES=n
kbuild: enforce -Werror=return-type
scripts: remove namespace.pl
builddeb: Add support for all required debian/rules targets
builddeb: Enable rootless builds
builddeb: Pass -n to gzip for reproducible packages
kbuild: split the build log of kallsyms
kbuild: explicitly specify the build id style
scripts/setlocalversion: make git describe output more reliable
kbuild: remove cc-option test of -Werror=date-time
kbuild: remove cc-option test of -fno-stack-check
kbuild: remove cc-option test of -fno-strict-overflow
kbuild: move CFLAGS_{KASAN,UBSAN,KCSAN} exports to relevant Makefiles
kbuild: remove redundant CONFIG_KASAN check from scripts/Makefile.kasan
kbuild: do not create built-in objects for external module builds
...
Pull initial set_fs() removal from Al Viro:
"Christoph's set_fs base series + fixups"
* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: Allow a NULL pos pointer to __kernel_read
fs: Allow a NULL pos pointer to __kernel_write
powerpc: remove address space overrides using set_fs()
powerpc: use non-set_fs based maccess routines
x86: remove address space overrides using set_fs()
x86: make TASK_SIZE_MAX usable from assembly code
x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h
lkdtm: remove set_fs-based tests
test_bitmap: remove user bitmap tests
uaccess: add infrastructure for kernel builds with set_fs()
fs: don't allow splice read/write without explicit ops
fs: don't allow kernel reads and writes without iter ops
sysctl: Convert to iter interfaces
proc: add a read_iter method to proc proc_ops
proc: cleanup the compat vs no compat file ops
proc: remove a level of indentation in proc_get_inode
- Fix the test suite after introduction of the local_lock
- Fix a bug in the IDA spotted by Coverity
- Change the API that allows the workingset code to delete a node
- Fix xas_reload() when dealing with entries that occupy multiple indices
- Add a few more tests to the test suite
- Fix an unsigned int being shifted into an unsigned long
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAl+OzzAACgkQDpNsjXcp
gj5YFgf/cV99dyPaal7AfMwhVwFcuVjIRH4S/VeOHkjS2QT1lpu3ffqfKALVR8vU
3IObM3oDCmLk0mYz9O+V/udVJoBYWiduI0LZhR6+V5ZrDjbw/d4VdCbwOplpeF5x
rntyI9r8f5d4LxBJ/moLjsosc1KfCzyVnV389eZRvZ8Muxuyc73WdAwZZZfD79nY
66gScEXQokU99zqJJ1nWfh05XTcTsKF25fVBGMLZTUBAytoFyPuC/kO2z8Uq9lEi
Ug6gDClskSB7A2W5gvprMcoUAVYcHfTb0wqJD5/MhkHyoTdcWdW8Re0kssXvD86V
KwlBdYQ/JuskgY/hbynZ/FP3p8+t1Q==
=12E/
-----END PGP SIGNATURE-----
Merge tag 'xarray-5.9' of git://git.infradead.org/users/willy/xarray
Pull XArray updates from Matthew Wilcox:
- Fix the test suite after introduction of the local_lock
- Fix a bug in the IDA spotted by Coverity
- Change the API that allows the workingset code to delete a node
- Fix xas_reload() when dealing with entries that occupy multiple
indices
- Add a few more tests to the test suite
- Fix an unsigned int being shifted into an unsigned long
* tag 'xarray-5.9' of git://git.infradead.org/users/willy/xarray:
XArray: Fix xas_create_range for ranges above 4 billion
radix-tree: fix the comment of radix_tree_next_slot()
XArray: Fix xas_reload for multi-index entries
XArray: Add private interface for workingset node deletion
XArray: Fix xas_for_each_conflict documentation
XArray: Test marked multiorder iterations
XArray: Test two more things about xa_cmpxchg
ida: Free allocated bitmap in error path
radix tree test suite: Fix compilation
Recently, in commit 6735b4632d ("Fonts: Support FONT_EXTRA_WORDS macros
for built-in fonts"), we wrapped each of our built-in data buffers in a
`font_data` structure, in order to use the following macros on them, see
include/linux/font.h:
#define REFCOUNT(fd) (((int *)(fd))[-1])
#define FNTSIZE(fd) (((int *)(fd))[-2])
#define FNTCHARCNT(fd) (((int *)(fd))[-3])
#define FNTSUM(fd) (((int *)(fd))[-4])
#define FONT_EXTRA_WORDS 4
Do the same thing to our new 6x8 font. For built-in fonts, currently we
only use FNTSIZE(). Since this is only a temporary solution for an
out-of-bounds issue in the framebuffer layer (see commit 5af0864079
("fbcon: Fix global-out-of-bounds read in fbcon_get_font()")), all the
three other fields are intentionally set to zero in order to discourage
using these negative-indexing macros.
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/926453876c92caac34cba8545716a491754d04d5.1603037079.git.yepeilin.cs@gmail.com
This Kunit update for Linux 5.10-rc1 consists of:
- add Kunit to kernel_init() and remove KUnit from init calls entirely.
This addresses the concern Kunit would not work correctly during
late init phase.
- add a linker section where KUnit can put references to its test suites.
This patch is the first step in transitioning to dispatching all KUnit
tests from a centralized executor rather than having each as its own
separate late_initcall.
- add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.
- convert bitfield test to use KUnit framework
- Documentation updates for naming guidelines and how kunit_test_suite()
works.
- add test plan to KUnit TAP format
-----BEGIN PGP SIGNATURE-----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=0Sco
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more Kunit updates from Shuah Khan:
- add Kunit to kernel_init() and remove KUnit from init calls entirely.
This addresses the concern that Kunit would not work correctly during
late init phase.
- add a linker section where KUnit can put references to its test
suites.
This is the first step in transitioning to dispatching all KUnit
tests from a centralized executor rather than having each as its own
separate late_initcall.
- add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.
- convert bitfield test to use KUnit framework
- Documentation updates for naming guidelines and how
kunit_test_suite() works.
- add test plan to KUnit TAP format
* tag 'linux-kselftest-kunit-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
lib: kunit: Fix compilation test when using TEST_BIT_FIELD_COMPILE
lib: kunit: add bitfield test conversion to KUnit
Documentation: kunit: add a brief blurb about kunit_test_suite
kunit: test: add test plan to KUnit TAP format
init: main: add KUnit to kernel init
kunit: test: create a single centralized executor for all tests
vmlinux.lds.h: add linker section for KUnit test suites
Documentation: kunit: Add naming guidelines
Pull RCU changes from Ingo Molnar:
- Debugging for smp_call_function()
- RT raw/non-raw lock ordering fixes
- Strict grace periods for KASAN
- New smp_call_function() torture test
- Torture-test updates
- Documentation updates
- Miscellaneous fixes
[ This doesn't actually pull the tag - I've dropped the last merge from
the RCU branch due to questions about the series. - Linus ]
* tag 'core-rcu-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
smp: Make symbol 'csd_bug_count' static
kernel/smp: Provide CSD lock timeout diagnostics
smp: Add source and destination CPUs to __call_single_data
rcu: Shrink each possible cpu krcp
rcu/segcblist: Prevent useless GP start if no CBs to accelerate
torture: Add gdb support
rcutorture: Allow pointer leaks to test diagnostic code
rcutorture: Hoist OOM registry up one level
refperf: Avoid null pointer dereference when buf fails to allocate
rcutorture: Properly synchronize with OOM notifier
rcutorture: Properly set rcu_fwds for OOM handling
torture: Add kvm.sh --help and update help message
rcutorture: Add CONFIG_PROVE_RCU_LIST to TREE05
torture: Update initrd documentation
rcutorture: Replace HTTP links with HTTPS ones
locktorture: Make function torture_percpu_rwsem_init() static
torture: document --allcpus argument added to the kvm.sh script
rcutorture: Output number of elapsed grace periods
rcutorture: Remove KCSAN stubs
rcu: Remove unused "cpu" parameter from rcu_report_qs_rdp()
...
The typical set of driver updates across the subsystem:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma, hns,
usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where MRA
wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail at
the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist
-----BEGIN PGP SIGNATURE-----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=LKpl
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A usual cycle for RDMA with a typical mix of driver and core subsystem
updates:
- Driver minor changes and bug fixes for mlx5, efa, rxe, vmw_pvrdma,
hns, usnic, qib, qedr, cxgb4, hns, bnxt_re
- Various rtrs fixes and updates
- Bug fix for mlx4 CM emulation for virtualization scenarios where
MRA wasn't working right
- Use tracepoints instead of pr_debug in the CM code
- Scrub the locking in ucma and cma to close more syzkaller bugs
- Use tasklet_setup in the subsystem
- Revert the idea that 'destroy' operations are not allowed to fail
at the driver level. This proved unworkable from a HW perspective.
- Revise how the umem API works so drivers make fewer mistakes using
it
- XRC support for qedr
- Convert uverbs objects RWQ and MW to new the allocation scheme
- Large queue entry sizes for hns
- Use hmm_range_fault() for mlx5 On Demand Paging
- uverbs APIs to inspect the GID table instead of sysfs
- Move some of the RDMA code for building large page SGLs into
lib/scatterlist"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (191 commits)
RDMA/ucma: Fix use after free in destroy id flow
RDMA/rxe: Handle skb_clone() failure in rxe_recv.c
RDMA/rxe: Move the definitions for rxe_av.network_type to uAPI
RDMA: Explicitly pass in the dma_device to ib_register_device
lib/scatterlist: Do not limit max_segment to PAGE_ALIGNED values
IB/mlx4: Convert rej_tmout radix-tree to XArray
RDMA/rxe: Fix bug rejecting all multicast packets
RDMA/rxe: Fix skb lifetime in rxe_rcv_mcast_pkt()
RDMA/rxe: Remove duplicate entries in struct rxe_mr
IB/hfi,rdmavt,qib,opa_vnic: Update MAINTAINERS
IB/rdmavt: Fix sizeof mismatch
MAINTAINERS: CISCO VIC LOW LATENCY NIC DRIVER
RDMA/bnxt_re: Fix sizeof mismatch for allocation of pbl_tbl.
RDMA/bnxt_re: Use rdma_umem_for_each_dma_block()
RDMA/umem: Move to allocate SG table from pages
lib/scatterlist: Add support in dynamic allocation of SG table from pages
tools/testing/scatterlist: Show errors in human readable form
tools/testing/scatterlist: Rejuvenate bit-rotten test
RDMA/ipoib: Set rtnl_link_ops for ipoib interfaces
RDMA/uverbs: Expose the new GID query API to user space
...
A fairly modest set of changes for this cycle. Of particular
note are an earlycon fix from Doug Anderson and my own changes to get
kgdb/kdb to honour the kprobe blocklist. The later creates a safety
rail that strongly encourages developers not to place breakpoints in,
for example, arch specific trap handling code.
Also included are a couple of small fixes and tweaks: an API update,
eliminate a coverity dead code warning, improved handling of search
during multi-line printk and a couple of typo corrections.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
-----BEGIN PGP SIGNATURE-----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=x91W
-----END PGP SIGNATURE-----
Merge tag 'kgdb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"A fairly modest set of changes for this cycle.
Of particular note are an earlycon fix from Doug Anderson and my own
changes to get kgdb/kdb to honour the kprobe blocklist. The later
creates a safety rail that strongly encourages developers not to place
breakpoints in, for example, arch specific trap handling code.
Also included are a couple of small fixes and tweaks: an API update,
eliminate a coverity dead code warning, improved handling of search
during multi-line printk and a couple of typo corrections"
* tag 'kgdb-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Fix pager search for multi-line strings
kernel: debug: Centralize dbg_[de]activate_sw_breakpoints
kgdb: Add NOKPROBE labels on the trap handler functions
kgdb: Honour the kprobe blocklist when setting breakpoints
kernel/debug: Fix spelling mistake in debug_core.c
kdb: Use newer api for tasklist scanning
kgdb: Make "kgdbcon" work properly with "kgdb_earlycon"
kdb: remove unnecessary null check of dbg_io_ops
- removed support for PNX833x alias NXT_STB22x
- included Ingenic SoC support into generic MIPS kernels
- added support for new Ingenic SoCs
- converted workaround selection to use Kconfig
- replaced old boot mem functions by memblock_*
- enabled COP2 usage in kernel for Loongson64 to make usage
of usage of 16byte load/stores possible
- cleanups and fixes
-----BEGIN PGP SIGNATURE-----
iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl+Jk/MaHHRzYm9nZW5k
QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHDjyA/9EAEb8woPRsEfbQE8GLgT
vW2y2/fSHFJHoYY/t9+G81lJVKsg9TXQ9LyNk3WSU6+a6qELVqmnHY7+e43rSkfG
qaxMRJOmwsMU7NWQOy1OSyESHidsAXrGYMY40TKrcClyVbS/Ob6wZ5QbBp+MTEsU
ane8Yq/QTS60xIxsS0SZSiQpqzumUn7oHAwCAlqcqo26tV94mtrtsFG4pReqI2gh
Bxs2ZoQYdx1/rPGXHV74fwP3Iz1Rwq3Z38FCyK7ME98cTEiLxYs1/ztgL1y0IC07
F3Dv3wmPtCGZtNyqDJxs7lHsbi74owSyoueywNeOA+YV8IzkOCEW0XpgL7vI2gPL
OIi+LbH7MXt3P14h5ekzK+dSILg3yNFD152PmGxpUVzVhfDCw+uyUHzHdhZSCF/J
aldlDm1wtUV5PacruVbH26amownTsfdei+WTtgGN3QAISmnLjUghsplPZE6KWbGW
uPPpuIA2pTwW2FQdXL/WwGZm1k44ii5zX1Cjc55AZISZOzFXqklbuEZbMEM5O76N
EFR+zOd4+wueOZOI7vpBTmKSSY/r12Ve25hbMMYeY0G3bbsubcIIIHHRxhdPp/+R
8t+PTC9//bT9r/OKdGV6TDsSJmSZWfaaNd30actDHpss8ruUlNxwWv7awp/z0sOs
U+R5CAaVvzQlhxkzdO+M03w=
=Aa/Q
-----END PGP SIGNATURE-----
Merge tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- removed support for PNX833x alias NXT_STB22x
- included Ingenic SoC support into generic MIPS kernels
- added support for new Ingenic SoCs
- converted workaround selection to use Kconfig
- replaced old boot mem functions by memblock_*
- enabled COP2 usage in kernel for Loongson64 to make use
of 16byte load/stores possible
- cleanups and fixes
* tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits)
MIPS: DEC: Restore bootmem reservation for firmware working memory area
MIPS: dec: fix section mismatch
bcm963xx_tag.h: fix duplicated word
mips: ralink: enable zboot support
MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES
MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit
MIPS: cpu-probe: introduce exclusive R3k CPU probe
MIPS: cpu-probe: move fpu probing/handling into its own file
MIPS: replace add_memory_region with memblock
MIPS: Loongson64: Clean up numa.c
MIPS: Loongson64: Select SMP in Kconfig to avoid build error
mips: octeon: Add Ubiquiti E200 and E220 boards
MIPS: SGI-IP28: disable use of ll/sc in kernel
MIPS: tx49xx: move tx4939_add_memory_regions into only user
MIPS: pgtable: Remove used PAGE_USERIO define
MIPS: alchemy: Share prom_init implementation
MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled
MIPS: process: include exec.h header in process.c
MIPS: process: Add prototype for function arch_dup_task_struct
MIPS: idle: Add prototype for function check_wait
...
A build condition was missing around a compilation test, this compilation
test comes from the original test_bitfield code.
And removed unnecessary code for this test.
Fixes: d2585f5164 ("lib: kunit: add bitfield test conversion to KUnit")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Link: https://lore.kernel.org/linux-next/20201015163056.56fcc835@canb.auug.org.au/
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Merge more updates from Andrew Morton:
"155 patches.
Subsystems affected by this patch series: mm (dax, debug, thp,
readahead, page-poison, util, memory-hotplug, zram, cleanups), misc,
core-kernel, get_maintainer, MAINTAINERS, lib, bitops, checkpatch,
binfmt, ramfs, autofs, nilfs, rapidio, panic, relay, kgdb, ubsan,
romfs, and fault-injection"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (155 commits)
lib, uaccess: add failure injection to usercopy functions
lib, include/linux: add usercopy failure capability
ROMFS: support inode blocks calculation
ubsan: introduce CONFIG_UBSAN_LOCAL_BOUNDS for Clang
sched.h: drop in_ubsan field when UBSAN is in trap mode
scripts/gdb/tasks: add headers and improve spacing format
scripts/gdb/proc: add struct mount & struct super_block addr in lx-mounts command
kernel/relay.c: drop unneeded initialization
panic: dump registers on panic_on_warn
rapidio: fix the missed put_device() for rio_mport_add_riodev
rapidio: fix error handling path
nilfs2: fix some kernel-doc warnings for nilfs2
autofs: harden ioctl table
ramfs: fix nommu mmap with gaps in the page cache
mm: remove the now-unnecessary mmget_still_valid() hack
mm/gup: take mmap_lock in get_dump_page()
binfmt_elf, binfmt_elf_fdpic: use a VMA list snapshot
coredump: rework elf/elf_fdpic vma_dump_size() into common helper
coredump: refactor page range dumping into common helper
coredump: let dump_emit() bail out on short writes
...
To test fault-tolerance of user memory access functions, introduce fault
injection to usercopy functions.
If a failure is expected return either -EFAULT or the total amount of
bytes that were not copied.
Signed-off-by: Albert van der Linde <alinde@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20200831171733.955393-3-alinde@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "add fault injection to user memory access", v3.
The goal of this series is to improve testing of fault-tolerance in usages
of user memory access functions, by adding support for fault injection.
syzkaller/syzbot are using the existing fault injection modes and will use
this particular feature also.
The first patch adds failure injection capability for usercopy functions.
The second changes usercopy functions to use this new failure capability
(copy_from_user, ...). The third patch adds get/put/clear_user failures
to x86.
This patch (of 3):
Add a failure injection capability to improve testing of fault-tolerance
in usages of user memory access functions.
Add CONFIG_FAULT_INJECTION_USERCOPY to enable faults in usercopy
functions. The should_fail_usercopy function is to be called by these
functions (copy_from_user, get_user, ...) in order to fail or not.
Signed-off-by: Albert van der Linde <alinde@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20200831171733.955393-1-alinde@google.com
Link: http://lkml.kernel.org/r/20200831171733.955393-2-alinde@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the kernel is compiled with Clang, -fsanitize=bounds expands to
-fsanitize=array-bounds and -fsanitize=local-bounds.
Enabling -fsanitize=local-bounds with Clang has the unfortunate
side-effect of inserting traps; this goes back to its original intent,
which was as a hardening and not a debugging feature [1]. The same
feature made its way into -fsanitize=bounds, but the traps remained. For
that reason, -fsanitize=bounds was split into 'array-bounds' and
'local-bounds' [2].
Since 'local-bounds' doesn't behave like a normal sanitizer, enable it
with Clang only if trapping behaviour was requested by
CONFIG_UBSAN_TRAP=y.
Add the UBSAN_BOUNDS_LOCAL config to Kconfig.ubsan to enable the
'local-bounds' option by default when UBSAN_TRAP is enabled.
[1] http://lists.llvm.org/pipermail/llvm-dev/2012-May/049972.html
[2] http://lists.llvm.org/pipermail/cfe-commits/Week-of-Mon-20131021/091536.html
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: George Popescu <georgepope@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Brazdil <dbrazdil@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: https://lkml.kernel.org/r/20200922074330.2549523-1-georgepope@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Whether crc32_be needs a lookup table is chosen based on CRC_LE_BITS.
Obviously, the _be function should be governed by the _BE_ define.
This probably never pops up as it's hard to come up with a configuration
where CRC_BE_BITS isn't the same as CRC_LE_BITS and as nobody is using
bitwise CRC anyway.
Fixes: 46c5801eaf ("crc32: bolt on crc32c")
Signed-off-by: Tobias Jordan <kernel@cdqe.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lkml.kernel.org/r/20200923182122.GA3338@agrajag.zerfleddert.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is supposed to return false on failure, not a negative error code.
Fixes: 170e38548b81 ("mm/hmm/test: use after free in dmirror_allocate_chunk()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: https://lkml.kernel.org/r/20201010200812.GA1886610@mwanda
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use helper macro abs() to simplify the "x >= t || x <= -t" cmp.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200927122746.5964-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
'sgl' is zeroed a few lines below in 'sg_init_table()'. There is no need to
clear it twice.
Remove the redundant initialization.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200920071544.368841-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The documentation for these functions indicates that callers don't need to
hold a lock while calling them, but that documentation is only in one
place under "IDA Usage". Let's state the same information on each IDA
function so that it's clear what the calling context requires.
Furthermore, let's document ida_simple_get() with the same information so
that callers know how this API works.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tri Vo <trong@android.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox <willy@infradead.org>
Link: https://lkml.kernel.org/r/20200910055246.2297797-1-swboyd@chromium.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Drop the repeated word "the".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200823040520.1999-1-rdunlap@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Drop the repeated word "the".
Fix spelling of "excess".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200823040449.25946-1-rdunlap@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out min()/max()
et al. helpers.
At the same time convert users in header and lib folder to use new header.
Though for time being include new header back to kernel.h to avoid
twisted indirected includes for other existing users.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Joe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200910164152.GA1891694@smile.fi.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order to use multi-index entries for huge pages in the page cache, we
need to be able to split a multi-index entry (eg if a file is truncated in
the middle of a huge page entry). This version does not support splitting
more than one level of the tree at a time. This is an acceptable
limitation for the page cache as we do not expect to support order-12
pages in the near future.
[akpm@linux-foundation.org: export xas_split_alloc() to modules]
[willy@infradead.org: fix xarray split]
Link: https://lkml.kernel.org/r/20200910175450.GV6583@casper.infradead.org
[willy@infradead.org: fix xarray]
Link: https://lkml.kernel.org/r/20201001233943.GW20115@casper.infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Qian Cai <cai@lca.pw>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lkml.kernel.org/r/20200903183029.14930-3-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Fix read-only THP for non-tmpfs filesystems".
As described more verbosely in the [3/3] changelog, we can inadvertently
put an order-0 page in the page cache which occupies 512 consecutive
entries. Users are running into this if they enable the
READ_ONLY_THP_FOR_FS config option; see
https://bugzilla.kernel.org/show_bug.cgi?id=206569 and Qian Cai has also
reported it here:
https://lore.kernel.org/lkml/20200616013309.GB815@lca.pw/
This is a rather intrusive way of fixing the problem, but has the
advantage that I've actually been testing it with the THP patches, which
means that it sees far more use than it does upstream -- indeed, Song has
been entirely unable to reproduce it. It also has the advantage that it
removes a few patches from my gargantuan backlog of THP patches.
This patch (of 3):
This function returns the order of the entry at the index. We need this
because there isn't space in the shadow entry to encode its order.
[akpm@linux-foundation.org: export xa_get_order to modules]
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Qian Cai <cai@lca.pw>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lkml.kernel.org/r/20200903183029.14930-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20200903183029.14930-2-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The main intention of the max_segment argument to
__sg_alloc_table_from_pages() is to match the DMA layer segment size set
by dma_set_max_seg_size().
Restricting the input to be page aligned makes it impossible to just
connect the DMA layer to this API.
The only reason for a page alignment here is because the algorithm will
overshoot the max_segment if it is not a multiple of PAGE_SIZE. Simply fix
the alignment before starting and don't expose this implementation detail
to the callers.
A future patch will completely remove SCATTERLIST_MAX_SEGMENT.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
sgl_alloc_order() can fail when 'length' is large on a memory
constrained system. When order > 0 it will potentially be
making several multi-page allocations with the later ones more
likely to fail than the earlier one. So it is important that
sgl_alloc_order() frees up any pages it has obtained before
returning NULL. In the case when order > 0 it calls the wrong
free page function and leaks. In testing the leak was
sufficient to bring down my 8 GiB laptop with OOM.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
traversal in common container configs and improving TCP back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
Expand netlink policy support and improve policy export to user space.
(Ge)netlink core performs request validation according to declared
policies. Expand the expressiveness of those policies (min/max length
and bitmasks). Allow dumping policies for particular commands.
This is used for feature discovery by user space (instead of kernel
version parsing or trial and error).
Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
Allow more than 255 IPv4 multicast interfaces.
Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
In Multi-patch TCP (MPTCP) support concurrent transmission of data
on multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
Allow more calls to same peer in RxRPC.
Support two new Controller Area Network (CAN) protocols -
CAN-FD and ISO 15765-2:2016.
Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
Add TC actions for implementing MPLS L2 VPNs.
Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary notifications
and make it easier to offload nexthops into HW by converting
to a blocking notifier.
Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific
TCP option use.
Reorganize TCP congestion control (CC) initialization to simplify life
of TCP CC implemented in BPF.
Add support for shipping BPF programs with the kernel and loading them
early on boot via the User Mode Driver mechanism, hence reusing all the
user space infra we have.
Support sleepable BPF programs, initially targeting LSM and tracing.
Add bpf_d_path() helper for returning full path for given 'struct path'.
Make bpf_tail_call compatible with bpf-to-bpf calls.
Allow BPF programs to call map_update_elem on sockmaps.
Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
Support listing and getting information about bpf_links via the bpf
syscall.
Enhance kernel interfaces around NIC firmware update. Allow specifying
overwrite mask to control if settings etc. are reset during update;
report expected max time operation may take to users; support firmware
activation without machine reboot incl. limits of how much impact
reset may have (e.g. dropping link or not).
Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
Adopt or extend devlink use for debug, monitoring, fw update
in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
mv88e6xxx, dpaa2-eth).
In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
Add XDP support for Intel's igb driver.
Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
Improve performance for packets which don't require much offloads
on recent Mellanox NICs by 20% by making multiple packets share
a descriptor entry.
Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
subtree to drivers/net. Move MDIO drivers out of the phy directory.
Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bc1U
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
- Add redirect_neigh() BPF packet redirect helper, allowing to limit
stack traversal in common container configs and improving TCP
back-pressure.
Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
- Expand netlink policy support and improve policy export to user
space. (Ge)netlink core performs request validation according to
declared policies. Expand the expressiveness of those policies
(min/max length and bitmasks). Allow dumping policies for particular
commands. This is used for feature discovery by user space (instead
of kernel version parsing or trial and error).
- Support IGMPv3/MLDv2 multicast listener discovery protocols in
bridge.
- Allow more than 255 IPv4 multicast interfaces.
- Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
packets of TCPv6.
- In Multi-patch TCP (MPTCP) support concurrent transmission of data on
multiple subflows in a load balancing scenario. Enhance advertising
addresses via the RM_ADDR/ADD_ADDR options.
- Support SMC-Dv2 version of SMC, which enables multi-subnet
deployments.
- Allow more calls to same peer in RxRPC.
- Support two new Controller Area Network (CAN) protocols - CAN-FD and
ISO 15765-2:2016.
- Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
kernel problem.
- Add TC actions for implementing MPLS L2 VPNs.
- Improve nexthop code - e.g. handle various corner cases when nexthop
objects are removed from groups better, skip unnecessary
notifications and make it easier to offload nexthops into HW by
converting to a blocking notifier.
- Support adding and consuming TCP header options by BPF programs,
opening the doors for easy experimental and deployment-specific TCP
option use.
- Reorganize TCP congestion control (CC) initialization to simplify
life of TCP CC implemented in BPF.
- Add support for shipping BPF programs with the kernel and loading
them early on boot via the User Mode Driver mechanism, hence reusing
all the user space infra we have.
- Support sleepable BPF programs, initially targeting LSM and tracing.
- Add bpf_d_path() helper for returning full path for given 'struct
path'.
- Make bpf_tail_call compatible with bpf-to-bpf calls.
- Allow BPF programs to call map_update_elem on sockmaps.
- Add BPF Type Format (BTF) support for type and enum discovery, as
well as support for using BTF within the kernel itself (current use
is for pretty printing structures).
- Support listing and getting information about bpf_links via the bpf
syscall.
- Enhance kernel interfaces around NIC firmware update. Allow
specifying overwrite mask to control if settings etc. are reset
during update; report expected max time operation may take to users;
support firmware activation without machine reboot incl. limits of
how much impact reset may have (e.g. dropping link or not).
- Extend ethtool configuration interface to report IEEE-standard
counters, to limit the need for per-vendor logic in user space.
- Adopt or extend devlink use for debug, monitoring, fw update in many
drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
dpaa2-eth).
- In mlxsw expose critical and emergency SFP module temperature alarms.
Refactor port buffer handling to make the defaults more suitable and
support setting these values explicitly via the DCBNL interface.
- Add XDP support for Intel's igb driver.
- Support offloading TC flower classification and filtering rules to
mscc_ocelot switches.
- Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
fixed interval period pulse generator and one-step timestamping in
dpaa-eth.
- Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
offload.
- Add Lynx PHY/PCS MDIO module, and convert various drivers which have
this HW to use it. Convert mvpp2 to split PCS.
- Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
7-port Mediatek MT7531 IP.
- Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
and wcn3680 support in wcn36xx.
- Improve performance for packets which don't require much offloads on
recent Mellanox NICs by 20% by making multiple packets share a
descriptor entry.
- Move chelsio inline crypto drivers (for TLS and IPsec) from the
crypto subtree to drivers/net. Move MDIO drivers out of the phy
directory.
- Clean up a lot of W=1 warnings, reportedly the actively developed
subsections of networking drivers should now build W=1 warning free.
- Make sure drivers don't use in_interrupt() to dynamically adapt their
code. Convert tasklets to use new tasklet_setup API (sadly this
conversion is not yet complete).
* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
net, sockmap: Don't call bpf_prog_put() on NULL pointer
bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
bpf, sockmap: Add locking annotations to iterator
netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
net: fix pos incrementment in ipv6_route_seq_next
net/smc: fix invalid return code in smcd_new_buf_create()
net/smc: fix valid DMBE buffer sizes
net/smc: fix use-after-free of delayed events
bpfilter: Fix build error with CONFIG_BPFILTER_UMH
cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
bpf: Fix register equivalence tracking.
rxrpc: Fix loss of final ack on shutdown
rxrpc: Fix bundle counting for exclusive connections
netfilter: restore NF_INET_NUMHOOKS
ibmveth: Identify ingress large send packets.
ibmveth: Switch order of ibmveth_helper calls.
cxgb4: handle 4-tuple PEDIT to NAT mode translation
selftests: Add VRF route leaking tests
...
Pull trivial updates from Jiri Kosina:
"The latest advances in computer science from the trivial queue"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
xtensa: fix Kconfig typo
spelling.txt: Remove some duplicate entries
mtd: rawnand: oxnas: cleanup/simplify code
selftests: vm: add fragment CONFIG_GUP_BENCHMARK
perf: Fix opt help text for --no-bpf-event
HID: logitech-dj: Fix spelling in comment
bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG
MAINTAINERS: rectify MMP SUPPORT after moving cputype.h
scif: Fix spelling of EACCES
printk: fix global comment
lib/bitmap.c: fix spello
fs: Fix missing 'bit' in comment
New driver:
Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config
-----BEGIN PGP SIGNATURE-----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=4H8J
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm
Pull drm updates from Dave Airlie:
"Not a major amount of change, the i915 trees got split into display
and gt trees to better facilitate higher level review, and there's a
major refactoring of i915 GEM locking to use more core kernel concepts
(like ww-mutexes). msm gets per-process pagetables, older AMD SI cards
get DC support, nouveau got a bump in displayport support with common
code extraction from i915.
Outside of drm this contains a couple of patches for hexint
moduleparams which you've acked, and a virtio common code tree that
you should also get via it's regular path.
New driver:
- Cadence MHDP8546 DisplayPort bridge driver
core:
- cross-driver scatterlist cleanups
- devm_drm conversions
- remove drm_dev_init
- devm_drm_dev_alloc conversion
ttm:
- lots of refactoring and cleanups
bridges:
- chained bridge support in more drivers
panel:
- misc new panels
scheduler:
- cleanup priority levels
displayport:
- refactor i915 code into helpers for nouveau
i915:
- split into display and GT trees
- WW locking refactoring in GEM
- execbuf2 extension mechanism
- syncobj timeline support
- GEN 12 HOBL display powersaving
- Rocket Lake display additions
- Disable FBC on Tigerlake
- Tigerlake Type-C + DP improvements
- Hotplug interrupt refactoring
amdgpu:
- Sienna Cichlid updates
- Navy Flounder updates
- DCE6 (SI) support for DC
- Plane rotation enabled
- TMZ state info ioctl
- PCIe DPC recovery support
- DC interrupt handling refactor
- OLED panel fixes
amdkfd:
- add SMI events for thermal throttling
- SMI interface events ioctl update
- process eviction counters
radeon:
- move to dma_ for allocations
- expose sclk via sysfs
msm:
- DSI support for sm8150/sm8250
- per-process GPU pagetable support
- Displayport support
mediatek:
- move HDMI phy driver to PHY
- convert mtk-dpi to bridge API
- disable mt2701 tmds
tegra:
- bridge support
exynos:
- misc cleanups
vc4:
- dual display cleanups
ast:
- cleanups
gma500:
- conversion to GPIOd API
hisilicon:
- misc reworks
ingenic:
- clock handling and format improvements
mcde:
- DSI support
mgag200:
- desktop g200 support
mxsfb:
- i.MX7 + i.MX8M
- alpha plane support
panfrost:
- devfreq support
- amlogic SoC support
ps8640:
- EDID from eDP retrieval
tidss:
- AM65xx YUV workaround
virtio:
- virtio-gpu exported resources
rcar-du:
- R8A7742, R8A774E1 and R8A77961 support
- YUV planar format fixes
- non-visible plane handling
- VSP device reference count fix
- Kconfig fix to avoid displaying disabled options in .config"
* tag 'drm-next-2020-10-15' of git://anongit.freedesktop.org/drm/drm: (1494 commits)
drm/ingenic: Fix bad revert
drm/amdgpu: Fix invalid number of character '{' in amdgpu_acpi_init
drm/amdgpu: Remove warning for virtual_display
drm/amdgpu: kfd_initialized can be static
drm/amd/pm: setup APU dpm clock table in SMU HW initialization
drm/amdgpu: prevent spurious warning
drm/amdgpu/swsmu: fix ARC build errors
drm/amd/display: Fix OPTC_DATA_FORMAT programming
drm/amd/display: Don't allow pstate if no support in blank
drm/panfrost: increase readl_relaxed_poll_timeout values
MAINTAINERS: Update entry for st7703 driver after the rename
Revert "gpu/drm: ingenic: Add option to mmap GEM buffers cached"
drm/amd/display: HDMI remote sink need mode validation for Linux
drm/amd/display: Change to correct unit on audio rate
drm/amd/display: Avoid set zero in the requested clk
drm/amdgpu: align frag_end to covered address space
drm/amdgpu: fix NULL pointer dereference for Renoir
drm/vmwgfx: fix regression in thp code due to ttm init refactor.
drm/amdgpu/swsmu: add interrupt work handler for smu11 parts
drm/amdgpu/swsmu: add interrupt work function
...
Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A
/bTQ42c/WRQ+LU828GSM
=6sO2
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
binder: fix UAF when releasing todo list
docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
misc: Kconfig: fix a HISI_HIKEY_USB dependency
LSM: Fix type of id parameter in kernel_post_load_data prototype
misc: Kconfig: add a new dependency for HISI_HIKEY_USB
firmware_loader: fix a kernel-doc markup
w1: w1_therm: make w1_poll_completion static
binder: simplify the return expression of binder_mmap
test_firmware: Test partial read support
firmware: Add request_partial_firmware_into_buf()
firmware: Store opt_flags in fw_priv
fs/kernel_file_read: Add "offset" arg for partial reads
IMA: Add support for file reads without contents
LSM: Add "contents" flag to kernel_read_file hook
module: Call security_kernel_post_load_data()
firmware_loader: Use security_post_load_data()
LSM: Introduce kernel_post_load_data() hook
fs/kernel_read_file: Add file_size output argument
fs/kernel_read_file: Switch buffer size arg to size_t
fs/kernel_read_file: Remove redundant size argument
...
Here is the "big" set of driver core patches for 5.10-rc1
They include a lot of different things, all related to the driver core
and/or some driver logic:
- sysfs common write functions to make it easier to audit sysfs
attributes
- device connection cleanups and fixes
- devm helpers for a few functions
- NOIO allocations for when devices are being removed
- minor cleanups and fixes
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4c4yA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylS7gCfcS+7/PE42eXxMY0z8rBX8aDMadIAn2DVEghA
Eoh9UoMEW4g1uMKORA0c
=CVAW
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 5.10-rc1
They include a lot of different things, all related to the driver core
and/or some driver logic:
- sysfs common write functions to make it easier to audit sysfs
attributes
- device connection cleanups and fixes
- devm helpers for a few functions
- NOIO allocations for when devices are being removed
- minor cleanups and fixes
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits)
regmap: debugfs: use semicolons rather than commas to separate statements
platform/x86: intel_pmc_core: do not create a static struct device
drivers core: node: Use a more typical macro definition style for ACCESS_ATTR
drivers core: Use sysfs_emit for shared_cpu_map_show and shared_cpu_list_show
mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emit
drivers core: Miscellaneous changes for sysfs_emit
drivers core: Reindent a couple uses around sysfs_emit
drivers core: Remove strcat uses around sysfs_emit and neaten
drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions
sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output
dyndbg: use keyword, arg varnames for query term pairs
driver core: force NOIO allocations during unplug
platform_device: switch to simpler IDA interface
driver core: platform: Document return type of more functions
Revert "driver core: Annotate dev_err_probe() with __must_check"
Revert "test_firmware: Test platform fw loading on non-EFI systems"
iio: adc: xilinx-xadc: use devm_krealloc()
hwmon: pmbus: use more devres helpers
devres: provide devm_krealloc()
syscore: Use pm_pr_dbg() for syscore_{suspend,resume}()
...
Here is a very rare race which leaks memory:
Page P0 is allocated to the page cache. Page P1 is free.
Thread A Thread B Thread C
find_get_entry():
xas_load() returns P0
Removes P0 from page cache
P0 finds its buddy P1
alloc_pages(GFP_KERNEL, 1) returns P0
P0 has refcount 1
page_cache_get_speculative(P0)
P0 has refcount 2
__free_pages(P0)
P0 has refcount 1
put_page(P0)
P1 is not freed
Fix this by freeing all the pages in __free_pages() that won't be freed
by the call to put_page(). It's usually not a good idea to split a page,
but this is a very unlikely scenario.
Fixes: e286781d5f ("mm: speculative page references")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200926213919.26642-1-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Transfer all previous tests for KASAN to KUnit so they can be run more
easily. Using kunit_tool, developers can run these tests with their other
KUnit tests and see "pass" or "fail" with the appropriate KASAN report
instead of needing to parse each KASAN report to test KASAN
functionalities. All KASAN reports are still printed to dmesg.
Stack tests do not work properly when KASAN_STACK is enabled so those
tests use a check for "if IS_ENABLED(CONFIG_KASAN_STACK)" so they only run
if stack instrumentation is enabled. If KASAN_STACK is not enabled, KUnit
will print a statement to let the user know this test was not run with
KASAN_STACK enabled.
copy_user_test and kasan_rcu_uaf cannot be run in KUnit so there is a
separate test file for those tests, which can be run as before as a
module.
[trishalfonso@google.com: v14]
Link: https://lkml.kernel.org/r/20200915035828.570483-4-davidgow@google.com
Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200910070331.3358048-4-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Integrate KASAN into KUnit testing framework.
- Fail tests when KASAN reports an error that is not expected
- Use KUNIT_EXPECT_KASAN_FAIL to expect a KASAN error in KASAN
tests
- Expected KASAN reports pass tests and are still printed when run
without kunit_tool (kunit_tool still bypasses the report due to the
test passing)
- KUnit struct in current task used to keep track of the current
test from KASAN code
Make use of "[PATCH v3 kunit-next 1/2] kunit: generalize kunit_resource
API beyond allocated resources" and "[PATCH v3 kunit-next 2/2] kunit: add
support for named resources" from Alan Maguire [1]
- A named resource is added to a test when a KASAN report is
expected
- This resource contains a struct for kasan_data containing
booleans representing if a KASAN report is expected and if a
KASAN report is found
[1] (https://lore.kernel.org/linux-kselftest/1583251361-12748-1-git-send-email-alan.maguire@oracle.com/T/#t)
Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200915035828.570483-3-davidgow@google.com
Link: https://lkml.kernel.org/r/20200910070331.3358048-3-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The variable dmirror_zero_page is unused in the HMM self test driver which
was probably intended to demonstrate how a driver could use
migrate_vma_setup() to share a single read-only device private zero page
similar to how the CPU does. However, this isn't needed for the self
tests so remove it.
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jerome Glisse <jglisse@redhat.com>
Link: https://lkml.kernel.org/r/20200914213801.16520-1-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In support of device-dax growing the ability to front physically
dis-contiguous ranges of memory, update devm_memremap_pages() to track
multiple ranges with a single reference counter and devm instance.
Convert all [devm_]memremap_pages() users to specify the number of ranges
they are mapping in their 'struct dev_pagemap' instance.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Jérôme Glisse" <jglisse@redhat.co
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/159643103789.4062302.18426128170217903785.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/160106116293.30709.13350662794915396198.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The 'struct resource' in 'struct dev_pagemap' is only used for holding
resource span information. The other fields, 'name', 'flags', 'desc',
'parent', 'sibling', and 'child' are all unused wasted space.
This is in preparation for introducing a multi-range extension of
devm_memremap_pages().
The bulk of this change is unwinding all the places internal to libnvdimm
that used 'struct resource' unnecessarily, and replacing instances of
'struct dev_pagemap'.res with 'struct dev_pagemap'.range.
P2PDMA had a minor usage of the resource flags field, but only to report
failures with "%pR". That is replaced with an open coded print of the
range.
[dan.carpenter@oracle.com: mm/hmm/test: use after free in dmirror_allocate_chunk()]
Link: https://lkml.kernel.org/r/20200926121402.GA7467@kadam
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> [xen]
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/159643103173.4062302.768998885691711532.stgit@dwillia2-desk3.amr.corp.intel.com
Link: https://lkml.kernel.org/r/160106115761.30709.13539840236873663620.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since the kernel now requires at least Clang 10.0.1, remove any mention of
old Clang versions and simplify the documentation.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/20200902225911.209899-7-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=LzyE
-----END PGP SIGNATURE-----
Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Series of merge handling cleanups (Baolin, Christoph)
- Series of blk-throttle fixes and cleanups (Baolin)
- Series cleaning up BDI, seperating the block device from the
backing_dev_info (Christoph)
- Removal of bdget() as a generic API (Christoph)
- Removal of blkdev_get() as a generic API (Christoph)
- Cleanup of is-partition checks (Christoph)
- Series reworking disk revalidation (Christoph)
- Series cleaning up bio flags (Christoph)
- bio crypt fixes (Eric)
- IO stats inflight tweak (Gabriel)
- blk-mq tags fixes (Hannes)
- Buffer invalidation fixes (Jan)
- Allow soft limits for zone append (Johannes)
- Shared tag set improvements (John, Kashyap)
- Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel)
- DM no-wait support (Mike, Konstantin)
- Request allocation improvements (Ming)
- Allow md/dm/bcache to use IO stat helpers (Song)
- Series improving blk-iocost (Tejun)
- Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang,
Xianting, Yang, Yufen, yangerkun)
* tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits)
block: fix uapi blkzoned.h comments
blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue
blk-mq: get rid of the dead flush handle code path
block: get rid of unnecessary local variable
block: fix comment and add lockdep assert
blk-mq: use helper function to test hw stopped
block: use helper function to test queue register
block: remove redundant mq check
block: invoke blk_mq_exit_sched no matter whether have .exit_sched
percpu_ref: don't refer to ref->data if it isn't allocated
block: ratelimit handle_bad_sector() message
blk-throttle: Re-use the throtl_set_slice_end()
blk-throttle: Open code __throtl_de/enqueue_tg()
blk-throttle: Move service tree validation out of the throtl_rb_first()
blk-throttle: Move the list operation after list validation
blk-throttle: Fix IO hang for a corner case
blk-throttle: Avoid tracking latency if low limit is invalid
blk-throttle: Avoid getting the current time if tg->last_finish_time is 0
blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()
block: Remove redundant 'return' statement
...
Core changes:
- The big core change is the updated (v2) userspace character
device API. This corrects badly designed 64-bit alignment around
the line events. We also add the debounce request feature.
This echoes the often quotes passage from Frederick Brooks
"The mythical man-month" to always throw one away, which we
have seen before in things such as V4L2. So we put in a new
one and deprecate and obsolete the old one.
- All example tools in tools/gpio/* are migrated to the new API
to set a good example. The libgpiod userspace library has been
augmented to use this new API pretty much from day 1.
- Some misc API hardening by using strn* function calls has been
added as well.
- Use the simpler IDA interface for GPIO chip instance enumeration.
- Add device core function for counting string arrays in
device properties.
- Provide a generic library function kfree_strarray() that can
be used throughout the kernel.
Driver enhancements:
- The DesignWare dwapb-gpio driver has been enhanced and now
uses the IRQ handling in the gpiolib core.
- The mockup and aggregator drivers have seen some substantial
code clean-up and now use more of the core kernel
inftrastructure.
- Misc cleanups using dev_err_probe().
- The MXC drivers (Freescale/NXP) can now be built modularized,
which makes modularized GKI Android kernels happy.
-----BEGIN PGP SIGNATURE-----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=8CE2
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This time very little driver changes but lots of core changes.
We have some interesting cooperative work for ARM and Intel alike,
making the GPIO subsystem more and more suitable for industrial
systems and the like, in addition to the in-kernel users.
We touch driver core (device properties) and lib/* by adding one
simple string array free function, these are authored by Andy
Shevchenko who is a well known and recognized core helpers maintainers
so this should be fine.
We also see some Android GKI-related modularization in the MXC
drivers.
Core changes:
- The big core change is the updated (v2) userspace character device
API.
This corrects badly designed 64-bit alignment around the line
events. We also add the debounce request feature. This echoes the
often quotes passage from Frederick Brooks "The mythical man-month"
to always throw one away, which we have seen before in things such
as V4L2. So we put in a new one and deprecate and obsolete the old
one.
- All example tools in tools/gpio/* are migrated to the new API to
set a good example. The libgpiod userspace library has been
augmented to use this new API pretty much from day 1.
- Some misc API hardening by using strn* function calls has been
added as well.
- Use the simpler IDA interface for GPIO chip instance enumeration.
- Add device core function for counting string arrays in device
properties.
- Provide a generic library function kfree_strarray() that can be
used throughout the kernel.
Driver enhancements:
- The DesignWare dwapb-gpio driver has been enhanced and now uses the
IRQ handling in the gpiolib core.
- The mockup and aggregator drivers have seen some substantial code
clean-up and now use more of the core kernel inftrastructure.
- Misc cleanups using dev_err_probe().
- The MXC drivers (Freescale/NXP) can now be built modularized, which
makes modularized GKI Android kernels happy"
* tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits)
gpiolib: Update header block in gpiolib-cdev.h
gpiolib: cdev: switch from kstrdup() to kstrndup()
docs: gpio: add a new document to its index.rst
gpio: pca953x: Add support for the NXP PCAL9554B/C
tools: gpio: add debounce support to gpio-event-mon
tools: gpio: add multi-line monitoring to gpio-event-mon
tools: gpio: port gpio-event-mon to v2 uAPI
tools: gpio: port gpio-hammer to v2 uAPI
tools: gpio: rename nlines to num_lines
tools: gpio: port gpio-watch to v2 uAPI
tools: gpio: port lsgpio to v2 uAPI
gpio: uapi: document uAPI v1 as deprecated
gpiolib: cdev: support setting debounce
gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL
gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL
gpiolib: cdev: support edge detection for uAPI v2
gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL
gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL
gpiolib: add build option for CDEV v1 ABI
gpiolib: make cdev a build option
...
This adds the conversion of the runtime tests of test_bitfield,
from `lib/test_bitfield.c` to KUnit tests.
Code Style Documentation: [0]
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Link: [0] https://lore.kernel.org/linux-kselftest/20200620054944.167330-1-davidgow@google.com/T/#u
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Pull crypto updates from Herbert Xu:
"API:
- Allow DRBG testing through user-space af_alg
- Add tcrypt speed testing support for keyed hashes
- Add type-safe init/exit hooks for ahash
Algorithms:
- Mark arc4 as obsolete and pending for future removal
- Mark anubis, khazad, sead and tea as obsolete
- Improve boot-time xor benchmark
- Add OSCCA SM2 asymmetric cipher algorithm and use it for integrity
Drivers:
- Fixes and enhancement for XTS in caam
- Add support for XIP8001B hwrng in xiphera-trng
- Add RNG and hash support in sun8i-ce/sun8i-ss
- Allow imx-rngc to be used by kernel entropy pool
- Use crypto engine in omap-sham
- Add support for Ingenic X1830 with ingenic"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (205 commits)
X.509: Fix modular build of public_key_sm2
crypto: xor - Remove unused variable count in do_xor_speed
X.509: fix error return value on the failed path
crypto: bcm - Verify GCM/CCM key length in setkey
crypto: qat - drop input parameter from adf_enable_aer()
crypto: qat - fix function parameters descriptions
crypto: atmel-tdes - use semicolons rather than commas to separate statements
crypto: drivers - use semicolons rather than commas to separate statements
hwrng: mxc-rnga - use semicolons rather than commas to separate statements
hwrng: iproc-rng200 - use semicolons rather than commas to separate statements
hwrng: stm32 - use semicolons rather than commas to separate statements
crypto: xor - use ktime for template benchmarking
crypto: xor - defer load time benchmark to a later time
crypto: hisilicon/zip - fix the uninitalized 'curr_qm_qp_num'
crypto: hisilicon/zip - fix the return value when device is busy
crypto: hisilicon/zip - fix zero length input in GZIP decompress
crypto: hisilicon/zip - fix the uncleared debug registers
lib/mpi: Fix unused variable warnings
crypto: x86/poly1305 - Remove assignments with no effect
hwrng: npcm - modify readl to readb
...
The 'sibs' variable would be shifted as a 32-bit integer, so if 'shift'
is more than 32, this is undefined behaviour. In practice, this doesn't
happen because the page cache is the only user and nobody uses 16TB pages.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Move the tricky bits of dealing with the XArray from the workingset
code to the XArray. Make it clear in the documentation that this is a
private interface, and only export it for the benefit of the test suite.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Pull compat iovec cleanups from Al Viro:
"Christoph's series around import_iovec() and compat variant thereof"
* 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
security/keys: remove compat_keyctl_instantiate_key_iov
mm: remove compat_process_vm_{readv,writev}
fs: remove compat_sys_vmsplice
fs: remove the compat readv/writev syscalls
fs: remove various compat readv/writev helpers
iov_iter: transparently handle compat iovecs in import_iovec
iov_iter: refactor rw_copy_check_uvector and import_iovec
iov_iter: move rw_copy_check_uvector() into lib/iov_iter.c
compat.h: fix a spelling error in <linux/compat.h>
Pull copy_and_csum cleanups from Al Viro:
"Saner calling conventions for csum_and_copy_..._user() and friends"
[ Removing 800+ lines of code and cleaning stuff up is good - Linus ]
* 'work.csum_and_copy' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ppc: propagate the calling conventions change down to csum_partial_copy_generic()
amd64: switch csum_partial_copy_generic() to new calling conventions
sparc64: propagate the calling convention changes down to __csum_partial_copy_...()
xtensa: propagate the calling conventions change down into csum_partial_copy_generic()
mips: propagate the calling convention change down into __csum_partial_copy_..._user()
mips: __csum_partial_copy_kernel() has no users left
mips: csum_and_copy_{to,from}_user() are never called under KERNEL_DS
sparc32: propagate the calling conventions change down to __csum_partial_copy_sparc_generic()
i386: propagate the calling conventions change down to csum_partial_copy_generic()
sh: propage the calling conventions change down to csum_partial_copy_generic()
m68k: get rid of zeroing destination on error in csum_and_copy_from_user()
arm: propagate the calling convention changes down to csum_partial_copy_from_user()
alpha: propagate the calling convention changes down to csum_partial_copy.c helpers
saner calling conventions for csum_and_copy_..._user()
csum_and_copy_..._user(): pass 0xffffffff instead of 0 as initial sum
csum_partial_copy_nocheck(): drop the last argument
unify generic instances of csum_partial_copy_nocheck()
icmp_push_reply(): reorder adding the checksum up
skb_copy_and_csum_bits(): don't bother with the last argument
- Add deadlock detection for recursive read-locks. The rationale is outlined
in:
224ec489d3cd: ("lockdep/Documention: Recursive read lock detection reasoning")
The main deadlock pattern we want to detect is:
TASK A: TASK B:
read_lock(X);
write_lock(X);
read_lock_2(X);
- Add "latch sequence counters" (seqcount_latch_t):
A sequence counter variant where the counter even/odd value is used to
switch between two copies of protected data. This allows the read path,
typically NMIs, to safely interrupt the write side critical section.
We utilize this new variant for sched-clock, and to make x86 TSC handling safer.
- Other seqlock cleanups, fixes and enhancements
- KCSAN updates
- LKMM updates
- Misc updates, cleanups and fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Iq51
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"These are the locking updates for v5.10:
- Add deadlock detection for recursive read-locks.
The rationale is outlined in commit 224ec489d3 ("lockdep/
Documention: Recursive read lock detection reasoning")
The main deadlock pattern we want to detect is:
TASK A: TASK B:
read_lock(X);
write_lock(X);
read_lock_2(X);
- Add "latch sequence counters" (seqcount_latch_t):
A sequence counter variant where the counter even/odd value is used
to switch between two copies of protected data. This allows the
read path, typically NMIs, to safely interrupt the write side
critical section.
We utilize this new variant for sched-clock, and to make x86 TSC
handling safer.
- Other seqlock cleanups, fixes and enhancements
- KCSAN updates
- LKMM updates
- Misc updates, cleanups and fixes"
* tag 'locking-core-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables"
lockdep: Fix lockdep recursion
lockdep: Fix usage_traceoverflow
locking/atomics: Check atomic-arch-fallback.h too
locking/seqlock: Tweak DEFINE_SEQLOCK() kernel doc
lockdep: Optimize the memory usage of circular queue
seqlock: Unbreak lockdep
seqlock: PREEMPT_RT: Do not starve seqlock_t writers
seqlock: seqcount_LOCKNAME_t: Introduce PREEMPT_RT support
seqlock: seqcount_t: Implement all read APIs as statement expressions
seqlock: Use unique prefix for seqcount_t property accessors
seqlock: seqcount_LOCKNAME_t: Standardize naming convention
seqlock: seqcount latch APIs: Only allow seqcount_latch_t
rbtree_latch: Use seqcount_latch_t
x86/tsc: Use seqcount_latch_t
timekeeping: Use seqcount_latch_t
time/sched_clock: Use seqcount_latch_t
seqlock: Introduce seqcount_latch_t
mm/swap: Do not abuse the seqcount_t latching API
time/sched_clock: Use raw_read_seqcount_latch() during suspend
...
- Make all debug object descriptors constant. There is no reason to have
them writeable.
- Free the per CPU object pool after CPU unplug to avoid memory waste.
-----BEGIN PGP SIGNATURE-----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=BP3+
-----END PGP SIGNATURE-----
Merge tag 'core-debugobjects-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull debugobjects updates from Thomas Gleixner:
"A small set of updates for debug objects:
- Make all debug object descriptors constant. There is no reason to
have them writeable.
- Free the per CPU object pool after CPU unplug to avoid memory
waste"
* tag 'core-debugobjects-2020-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Free per CPU pool after CPU unplug
treewide: Make all debug_obj_descriptors const
debugobjects: Allow debug_obj_descr to be const
encounter an MCE in kernel space but while copying from user memory by
sending them a SIGBUS on return to user space and umapping the faulty
memory, by Tony Luck and Youquan Song.
* memcpy_mcsafe() rework by splitting the functionality into
copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables
support for new hardware which can recover from a machine check
encountered during a fast string copy and makes that the default and
lets the older hardware which does not support that advance recovery,
opt in to use the old, fragile, slow variant, by Dan Williams.
* New AMD hw enablement, by Yazen Ghannam and Akshay Gupta.
* Do not use MSR-tracing accessors in #MC context and flag any fault
while accessing MCA architectural MSRs as an architectural violation
with the hope that such hw/fw misdesigns are caught early during the hw
eval phase and they don't make it into production.
* Misc fixes, improvements and cleanups, as always.
-----BEGIN PGP SIGNATURE-----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=u1Wg
-----END PGP SIGNATURE-----
Merge tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Extend the recovery from MCE in kernel space also to processes which
encounter an MCE in kernel space but while copying from user memory
by sending them a SIGBUS on return to user space and umapping the
faulty memory, by Tony Luck and Youquan Song.
- memcpy_mcsafe() rework by splitting the functionality into
copy_mc_to_user() and copy_mc_to_kernel(). This, as a result, enables
support for new hardware which can recover from a machine check
encountered during a fast string copy and makes that the default and
lets the older hardware which does not support that advance recovery,
opt in to use the old, fragile, slow variant, by Dan Williams.
- New AMD hw enablement, by Yazen Ghannam and Akshay Gupta.
- Do not use MSR-tracing accessors in #MC context and flag any fault
while accessing MCA architectural MSRs as an architectural violation
with the hope that such hw/fw misdesigns are caught early during the
hw eval phase and they don't make it into production.
- Misc fixes, improvements and cleanups, as always.
* tag 'ras_updates_for_v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Allow for copy_mc_fragile symbol checksum to be generated
x86/mce: Decode a kernel instruction to determine if it is copying from user
x86/mce: Recover from poison found while copying from user space
x86/mce: Avoid tail copy when machine check terminated a copy from user
x86/mce: Add _ASM_EXTABLE_CPY for copy user access
x86/mce: Provide method to find out the type of an exception handler
x86/mce: Pass pointer to saved pt_regs to severity calculation routines
x86/copy_mc: Introduce copy_mc_enhanced_fast_string()
x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()
x86/mce: Drop AMD-specific "DEFERRED" case from Intel severity rule list
x86/mce: Add Skylake quirk for patrol scrub reported errors
RAS/CEC: Convert to DEFINE_SHOW_ATTRIBUTE()
x86/mce: Annotate mce_rd/wrmsrl() with noinstr
x86/mce/dev-mcelog: Do not update kflags on AMD systems
x86/mce: Stop mce_reign() from re-computing severity for every CPU
x86/mce: Make mce_rdmsrl() panic on an inaccessible MSR
x86/mce: Increase maximum number of banks to 64
x86/mce: Delay clearing IA32_MCG_STATUS to the end of do_machine_check()
x86/MCE/AMD, EDAC/mce_amd: Remove struct smca_hwid.xec_bitmap
RAS/CEC: Fix cec_init() prototype
Add a new attribute NLMSGERR_ATTR_POLICY to the extended ACK
to advertise the policy, e.g. if an attribute was out of range,
you'll know the range that's permissible.
Add new NL_SET_ERR_MSG_ATTR_POL() and NL_SET_ERR_MSG_ATTR_POL()
macros to set this, since realistically it's only useful to do
this when the bad attribute (offset) is also returned.
Use it in lib/nlattr.c which practically does all the policy
validation.
v2:
- add and use netlink_policy_dump_attr_size_estimate()
v3:
- remove redundant break
v4:
- really remove redundant break ... sorry
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TAP 14 allows an optional test plan to be emitted before the start of
the start of testing[1]; this is valuable because it makes it possible
for a test harness to detect whether the number of tests run matches the
number of tests expected to be run, ensuring that no tests silently
failed.
Link[1]: https://github.com/isaacs/testanything.github.io/blob/tap14/tap-version-14-specification.md#the-plan
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Although we have not seen any actual examples where KUnit doesn't work
because it runs in the late init phase of the kernel, it has been a
concern for some time that this could potentially be an issue in the
future. So, remove KUnit from init calls entirely, instead call directly
from kernel_init() so that KUnit runs after late init.
Co-developed-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a centralized executor to dispatch tests rather than relying on
late_initcall to schedule each test suite separately. Centralized
execution is for built-in tests only; modules will execute tests when
loaded.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Co-developed-by: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Iurii Zaikin <yzaikin@google.com>
Co-developed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We can't check ref->data->confirm_switch directly in __percpu_ref_exit(), since
ref->data may not be allocated in one not-initialized refcount.
Fixes: 2b0d3d3e4f ("percpu_ref: reduce memory footprint of percpu_ref in fast path")
Reported-by: syzbot+fd15ff734dace9e16437@syzkaller.appspotmail.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull KCSAN updates for v5.10 from Paul E. McKenney:
- Improve kernel messages.
- Be more permissive with bitops races under KCSAN_ASSUME_PLAIN_WRITES_ATOMIC=y.
- Optimize debugfs stat counters.
- Introduce the instrument_*read_write() annotations, to provide a
finer description of certain ops - using KCSAN's compound instrumentation.
Use them for atomic RNW and bitops, where appropriate.
Doing this might find new races.
(Depends on the compiler having tsan-compound-read-before-write=1 support.)
- Support atomic built-ins, which will help certain architectures, such as s390.
- Misc enhancements and smaller fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull v5.10 RCU changes from Paul E. McKenney:
- Debugging for smp_call_function().
- Strict grace periods for KASAN. The point of this series is to find
RCU-usage bugs, so the corresponding new RCU_STRICT_GRACE_PERIOD
Kconfig option depends on both DEBUG_KERNEL and RCU_EXPERT, and is
further disabled by dfefault. Finally, the help text includes
a goodly list of scary caveats.
- New smp_call_function() torture test.
- Torture-test updates.
- Documentation updates.
- Miscellaneous fixes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Small conflict around locking in rxrpc_process_event() -
channel_lock moved to bundle in next, while state lock
needs _bh() from net.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Demonstrate that starting a marked iteration partway through a marked
multi-order entry works.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
1. If we xa_cmpxchg() an entry in, it marks the index as not free.
2. If we xa_cmpxchg() NULL in, it marks the index as free.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
If a bitmap needs to be allocated, and then by the time the thread
is scheduled to be run again all the indices which would satisfy the
allocation have been allocated then we would leak the allocation. Almost
impossible to hit in practice, but a trivial fix. Found by Coverity.
Fixes: f32f004cdd ("ida: Convert to XArray")
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
'struct percpu_ref' is often embedded into one user structure, and the
instance is usually referenced in fast path, however actually only
'percpu_count_ptr' is needed in fast path.
So move other fields into one new structure of 'percpu_ref_data', and
allocate it dynamically via kzalloc(), then memory footprint of
'percpu_ref' in fast path is reduced a lot and becomes suitable to put
into hot cacheline of user structure.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Veronika Kabatova <vkabatov@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't have good validation policy for existing unsigned int attrs
which serve as flags (for new ones we could use NLA_BITFIELD32).
With increased use of policy dumping having the validation be
expressed as part of the policy is important. Add validation
policy in form of a mask of supported/valid bits.
Support u64 in the uAPI to be future-proof, but really for now
the embedded mask member can only hold 32 bits, so anything with
bit 32+ set will always fail validation.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In reaction to a proposal to introduce a memcpy_mcsafe_fast()
implementation Linus points out that memcpy_mcsafe() is poorly named
relative to communicating the scope of the interface. Specifically what
addresses are valid to pass as source, destination, and what faults /
exceptions are handled.
Of particular concern is that even though x86 might be able to handle
the semantics of copy_mc_to_user() with its common copy_user_generic()
implementation other archs likely need / want an explicit path for this
case:
On Fri, May 1, 2020 at 11:28 AM Linus Torvalds <torvalds@linux-foundation.org> wrote:
>
> On Thu, Apr 30, 2020 at 6:21 PM Dan Williams <dan.j.williams@intel.com> wrote:
> >
> > However now I see that copy_user_generic() works for the wrong reason.
> > It works because the exception on the source address due to poison
> > looks no different than a write fault on the user address to the
> > caller, it's still just a short copy. So it makes copy_to_user() work
> > for the wrong reason relative to the name.
>
> Right.
>
> And it won't work that way on other architectures. On x86, we have a
> generic function that can take faults on either side, and we use it
> for both cases (and for the "in_user" case too), but that's an
> artifact of the architecture oddity.
>
> In fact, it's probably wrong even on x86 - because it can hide bugs -
> but writing those things is painful enough that everybody prefers
> having just one function.
Replace a single top-level memcpy_mcsafe() with either
copy_mc_to_user(), or copy_mc_to_kernel().
Introduce an x86 copy_mc_fragile() name as the rename for the
low-level x86 implementation formerly named memcpy_mcsafe(). It is used
as the slow / careful backend that is supplanted by a fast
copy_mc_generic() in a follow-on patch.
One side-effect of this reorganization is that separating copy_mc_64.S
to its own file means that perf no longer needs to track dependencies
for its memcpy_64.S benchmarks.
[ bp: Massage a bit. ]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Link: http://lore.kernel.org/r/CAHk-=wjSqtXAqfUJxFtWNwmguFASTgB0dz1dT3V-78Quiezqbg@mail.gmail.com
Link: https://lkml.kernel.org/r/160195561680.2163339.11574962055305783722.stgit@dwillia2-desk3.amr.corp.intel.com
Rejecting non-native endian BTF overlapped with the addition
of support for it.
The rest were more simple overlapping changes, except the
renesas ravb binding update, which had to follow a file
move as well as a YAML conversion.
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend __sg_alloc_table_from_pages to support dynamic allocation of
SG table from pages. It should be used by drivers that can't supply
all the pages at one time.
This function returns the last populated SGE in the table. Users should
pass it as an argument to the function from the second call and forward.
As before, nents will be equal to the number of populated SGEs (chunks).
With this new extension, drivers can benefit the optimization of merging
contiguous pages without a need to allocate all pages in advance and
hold them in a large buffer.
E.g. with the Infiniband driver that allocates a single page for hold the
pages. For 1TB memory registration, the temporary buffer would consume only
4KB, instead of 2GB.
Link: https://lore.kernel.org/r/20201004154340.1080481-2-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add additional hooks to test_firmware to pass in support
for partial file read using request_firmware_into_buf():
buf_size: size of buffer to request firmware into
partial: indicates that a partial file request is being made
file_offset: to indicate offset into file to request
Also update firmware selftests to use the new partial read test API.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20201002173828.2099543-17-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use in compat_syscall to import either native or the compat iovecs, and
remove the now superflous compat_import_iovec.
This removes the need for special compat logic in most callers, and
the remaining ones can still be simplified by using __import_iovec
with a bool compat parameter.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Split rw_copy_check_uvector into two new helpers with more sensible
calling conventions:
- iovec_from_user copies a iovec from userspace either into the provided
stack buffer if it fits, or allocates a new buffer for it. Returns
the actually used iovec. It also verifies that iov_len does fit a
signed type, and handles compat iovecs if the compat flag is set.
- __import_iovec consolidates the native and compat versions of
import_iovec. It calls iovec_from_user, then validates each iovec
actually points to user addresses, and ensures the total length
doesn't overflow.
This has two major implications:
- the access_process_vm case loses the total lenght checking, which
wasn't required anyway, given that each call receives two iovecs
for the local and remote side of the operation, and it verifies
the total length on the local side already.
- instead of a single loop there now are two loops over the iovecs.
Given that the iovecs are cache hot this doesn't make a major
difference
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Commit f227e3ec3b ("random32: update the net random state on interrupt
and activity") broke compilation and was temporarily fixed by Linus in
83bdc7275e ("random32: remove net_rand_state from the latent entropy
gcc plugin") by entirely moving net_rand_state out of the things handled
by the latent_entropy GCC plugin.
From what I understand when reading the plugin code, using the
__latent_entropy attribute on a declaration was the wrong part and
simply keeping the __latent_entropy attribute on the variable definition
was the correct fix.
Fixes: 83bdc7275e ("random32: remove net_rand_state from the latent entropy gcc plugin")
Acked-by: Willy Tarreau <w@1wt.eu>
Cc: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Thibaut Sautereau <thibaut.sautereau@ssi.gouv.fr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch removes a number of unused variables and marks others
as unused in order to silence compiler warnings about them.
Fixes: a8ea8bdd9d ("lib/mpi: Extend the MPI library")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If a CPU is offlined the debug objects per CPU pool is not cleaned up. If
the CPU is never onlined again then the objects in the pool are wasted.
Add a CPU hotplug callback which is invoked after the CPU is dead to free
the pool.
[ tglx: Massaged changelog and added comment about remote access safety ]
Signed-off-by: Zqiang <qiang.zhang@windriver.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20200908062709.11441-1-qiang.zhang@windriver.com
There's a common pattern of dynamically allocating an array of char
pointers and then also dynamically allocating each string in this
array. Provide a helper for freeing such a string array with one call.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Currently kgdb has absolutely no safety rails in place to discourage or
prevent a user from placing a breakpoint in dangerous places such as
the debugger's own trap entry/exit and other places where it is not safe
to take synchronous traps.
Introduce a new config symbol KGDB_HONOUR_BLOCKLIST and modify the
default implementation of kgdb_validate_break_address() so that we use
the kprobe blocklist to prohibit instrumentation of critical functions
if the config symbol is set. The config symbol dependencies are set to
ensure that the blocklist will be enabled by default if we enable KGDB
and are compiling for an architecture where we HAVE_KPROBES.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20200927211531.1380577-2-daniel.thompson@linaro.org
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
This addresses the following sparse warning:
lib/memregion.c:8:5: warning: symbol 'memregion_alloc' was not declared. Should it be static?
lib/memregion.c:14:6: warning: symbol 'memregion_free' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200921142852.875312-1-yanaijie@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
LLVM implemented a recent "libcall optimization" that lowers calls to
`sprintf(dest, "%s", str)` where the return value is used to
`stpcpy(dest, str) - dest`.
This generally avoids the machinery involved in parsing format strings.
`stpcpy` is just like `strcpy` except it returns the pointer to the new
tail of `dest`. This optimization was introduced into clang-12.
Implement this so that we don't observe linkage failures due to missing
symbol definitions for `stpcpy`.
Similar to last year's fire drill with: commit 5f074f3e19
("lib/string.c: implement a basic bcmp")
The kernel is somewhere between a "freestanding" environment (no full
libc) and "hosted" environment (many symbols from libc exist with the
same type, function signature, and semantics).
As Peter Anvin notes, there's not really a great way to inform the
compiler that you're targeting a freestanding environment but would like
to opt-in to some libcall optimizations (see pr/47280 below), rather
than opt-out.
Arvind notes, -fno-builtin-* behaves slightly differently between GCC
and Clang, and Clang is missing many __builtin_* definitions, which I
consider a bug in Clang and am working on fixing.
Masahiro summarizes the subtle distinction between compilers justly:
To prevent transformation from foo() into bar(), there are two ways in
Clang to do that; -fno-builtin-foo, and -fno-builtin-bar. There is
only one in GCC; -fno-buitin-foo.
(Any difference in that behavior in Clang is likely a bug from a missing
__builtin_* definition.)
Masahiro also notes:
We want to disable optimization from foo() to bar(),
but we may still benefit from the optimization from
foo() into something else. If GCC implements the same transform, we
would run into a problem because it is not -fno-builtin-bar, but
-fno-builtin-foo that disables that optimization.
In this regard, -fno-builtin-foo would be more future-proof than
-fno-built-bar, but -fno-builtin-foo is still potentially overkill. We
may want to prevent calls from foo() being optimized into calls to
bar(), but we still may want other optimization on calls to foo().
It seems that compilers today don't quite provide the fine grain control
over which libcall optimizations pseudo-freestanding environments would
prefer.
Finally, Kees notes that this interface is unsafe, so we should not
encourage its use. As such, I've removed the declaration from any
header, but it still needs to be exported to avoid linkage errors in
modules.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Andy Lavr <andy.lavr@gmail.com>
Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Joe Perches <joe@perches.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200914161643.938408-1-ndesaulniers@google.com
Link: https://bugs.llvm.org/show_bug.cgi?id=47162
Link: https://bugs.llvm.org/show_bug.cgi?id=47280
Link: https://github.com/ClangBuiltLinux/linux/issues/1126
Link: https://man7.org/linux/man-pages/man3/stpcpy.3.html
Link: https://pubs.opengroup.org/onlinepubs/9699919799/functions/stpcpy.html
Link: https://reviews.llvm.org/D85963
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This lets the compiler inline it into import_iovec() generating
much better code.
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
No need to go through the hd_struct to find the partition number.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot has reported an issue in the framebuffer layer, where a malicious
user may overflow our built-in font data buffers.
In order to perform a reliable range check, subsystems need to know
`FONTDATAMAX` for each built-in font. Unfortunately, our font descriptor,
`struct console_font` does not contain `FONTDATAMAX`, and is part of the
UAPI, making it infeasible to modify it.
For user-provided fonts, the framebuffer layer resolves this issue by
reserving four extra words at the beginning of data buffers. Later,
whenever a function needs to access them, it simply uses the following
macros:
Recently we have gathered all the above macros to <linux/font.h>. Let us
do the same thing for built-in fonts, prepend four extra words (including
`FONTDATAMAX`) to their data buffers, so that subsystems can use these
macros for all fonts, no matter built-in or user-provided.
This patch depends on patch "fbdev, newport_con: Move FONT_EXTRA_WORDS
macros into linux/font.h".
Cc: stable@vger.kernel.org
Link: https://syzkaller.appspot.com/bug?id=08b8be45afea11888776f897895aef9ad1c3ecfd
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/ef18af00c35fb3cc826048a5f70924ed6ddce95b.1600953813.git.yepeilin.cs@gmail.com
The implementation of EC is introduced from libgcrypt as the
basic algorithm of elliptic curve, which can be more perfectly
integrated with MPI implementation.
Some other algorithms will be developed based on mpi ecc, such as SM2.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Expand the mpi library based on libgcrypt, and the ECC algorithm of
mpi based on libgcrypt requires these functions.
Some other algorithms will be developed based on mpi ecc, such as SM2.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Tested-by: Xufeng Zhang <yunbo.xufeng@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There is no reason for the chacha20poly1305 SG miter code to use
kmap instead of kmap_atomic as the critical section doesn't sleep
anyway. So we can simply get rid of the preemptible check and
set SG_MITER_ATOMIC unconditionally.
Even if we need to reenable preemption to lower latency we should
be doing that by interrupting the SG miter walk rather than using
kmap.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This should make it harder for the kernel to corrupt the debug object
descriptor, used to call functions to fixup state and track debug objects,
by moving the structure to read-only memory.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200815004027.2046113-3-swboyd@chromium.org
The debugobject core could be slightly harder to corrupt if the
debug_obj_descr would be a pointer to const memory.
Depending on the architecture, const data structures are placed into
read-only memory and thus are harder to corrupt or hijack.
This descriptor is used to fix up stuff like timers and workqueues when
core kernel data structures are busted, so moving the descriptors to
read-only memory will make debugobjects more resilient to something going
wrong and then corrupting the function pointers inside struct
debug_obj_descr.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200815004027.2046113-2-swboyd@chromium.org
Masami discovered two bugs which this fixes and he added tests to
cover these issues.
- Fix a bug that breaks bootconfig tree nodes
- Fix a bug that does not truncate whitespace properly
- Add tests to cover the above two cases
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX2uLGBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qh/dAP0Qgh1L4y13NgRRFVYFic8f3gcsFf3s
z0rNCzYabJkjvgD9GjoAdxYABxMnM7KVKwH8OCpcANIFo9Ry5oRJL5mSsgk=
=z4GW
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.9-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull bootconfig fixes from Steven Rostedt:
"A couple of fixes for bootconfig.
Masami discovered two bugs which this fixes and he added tests to
cover these issues.
- Fix a bug that breaks bootconfig tree nodes
- Fix a bug that does not truncate whitespace properly
- Add tests to cover the above two cases"
* tag 'trace-v5.9-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tools/bootconfig: Add testcase for tailing space
tools/bootconfig: Add testcases for repeated key with brace
lib/bootconfig: Fix to remove tailing spaces after value
lib/bootconfig: Fix a bug of breaking existing tree nodes
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from Jakub Kicinski:
- fix failure to add bond interfaces to a bridge, the offload-handling
code was too defensive there and recent refactoring unearthed that.
Users complained (Ido)
- fix unnecessarily reflecting ECN bits within TOS values / QoS marking
in TCP ACK and reset packets (Wei)
- fix a deadlock with bpf iterator. Hopefully we're in the clear on
this front now... (Yonghong)
- BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)
- fix AQL on mt76 devices with FW rate control and add a couple of AQL
issues in mac80211 code (Felix)
- fix authentication issue with mwifiex (Maximilian)
- WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)
- fix exception handling for multipath routes via same device (David
Ahern)
- revert back to a BH spin lock flavor for nsid_lock: there are paths
which do require the BH context protection (Taehee)
- fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)
- fix ife module load deadlock (Cong)
- make an adjustment to netlink reply message type for code added in
this release (the sole change touching uAPI here) (Michal)
- a number of fixes for small NXP and Microchip switches (Vladimir)
[ Pull request acked by David: "you can expect more of this in the
future as I try to delegate more things to Jakub" ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
net: Update MAINTAINERS for MediaTek switch driver
net/mlx5e: mlx5e_fec_in_caps() returns a boolean
net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
net/mlx5e: kTLS, Fix leak on resync error flow
net/mlx5e: kTLS, Add missing dma_unmap in RX resync
net/mlx5e: kTLS, Fix napi sync and possible use-after-free
net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
net/mlx5e: Fix endianness when calculating pedit mask first bit
net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
net/mlx5e: CT: Fix freeing ct_label mapping
net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
net/mlx5e: Use synchronize_rcu to sync with NAPI
net/mlx5e: Use RCU to protect rq->xdp_prog
...
Fix to remove tailing spaces after value. If there is a space
after value, the bootconfig failed to remove it because it
applies strim() before replacing the delimiter with null.
For example,
foo = var # comment
was parsed as below.
foo="var "
but user will expect
foo="var"
This fixes it by applying strim() after removing the delimiter.
Link: https://lkml.kernel.org/r/160068149134.1088739.8868306567670058853.stgit@devnote2
Fixes: 76db5a27a8 ("bootconfig: Add Extra Boot Config support")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Fix a bug of breaking existing tree nodes by parsing the second
and subsequent braces. Since the bootconfig parser uses the
node.next field as a flag of current parent node, but this will
break the existing tree if the same key node is specified again
in the bootconfig.
For example, the following bootconfig should be foo.buz and bar.
foo
bar
foo { buz }
However, when parsing the brace "{", it breaks foo->bar link
by marking open-brace node. So the bootconfig unlinks bar
from the bootconfig internal tree.
This introduces a stack outside of the tree and record the
last open-brace on the stack instead of using node.next field.
Link: https://lkml.kernel.org/r/160068148267.1088739.8264704338030168660.stgit@devnote2
Fixes: 76db5a27a8 ("bootconfig: Add Extra Boot Config support")
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
A continue statement is indented incorrectly, add in the missing
tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This moves the KCSAN kconfig items under menu 'Generic Kernel Debugging
Instruments' where UBSAN resides.
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200904152224.5570-1-changbin.du@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here are some small driver core and debugfs fixes for 5.9-rc5
Included in here are:
- firmware loader memory leak fix
- firmware loader testing fixes for non-EFI systems
- device link locking fixes found by lockdep
- kobject_del() bugfix that has been affecting some callers
- debugfs minor fix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX13Zhw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylfNQCfX4Bx9J1aLGr0/MOBwlXXEycChE0AmwQ9rXa7
u5Przdz+fMr1mLyNBaY5
=4kmo
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 5.9-rc5
Included in here are:
- firmware loader memory leak fix
- firmware loader testing fixes for non-EFI systems
- device link locking fixes found by lockdep
- kobject_del() bugfix that has been affecting some callers
- debugfs minor fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
test_firmware: Test platform fw loading on non-EFI systems
PM: <linux/device.h>: fix @em_pd kernel-doc warning
kobject: Drop unneeded conditional in __kobject_del()
driver core: Fix device_pm_lock() locking for device links
MAINTAINERS: Add the security document to SECURITY CONTACT
driver code: print symbolic error code
debugfs: Fix module state check condition
kobject: Restore old behaviour of kobject_del(NULL)
firmware_loader: fix memory leak for paged buffer
This reverts commit 14775b0496 as there
were still some parsing problems with it, and the follow-on patch for
it.
Let's revisit it later, just drop it for now.
Cc: <jbaron@akamai.com>
Cc: Jim Cromie <jim.cromie@gmail.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 14775b0496 ("dyndbg: accept query terms like file=bar and module=foo")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 42f07816ac as it
still causes problems. It will be resolved later, let's revert it so we
can also revert the original patch this was supposed to be helping with.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 42f07816ac ("dyndbg: fix problem parsing format="foo bar"")
Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I can't always remember the return values of these functions, and so I
usually jump to the function to read the kernel-doc and see that it
doesn't tell me. Then I have to spend more time reading the code to jump
to the function that actually tells me the return values. Let's document
it here so that we don't all have to spend time digging through the code
to understand the return values.
Cc: <linux-doc@vger.kernel.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20200910060440.2302925-1-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On non-EFI systems, it wasn't possible to test the platform firmware
loader because it will have never set "checked_fw" during __init.
Instead, allow the test code to override this check. Additionally split
the declarations into a private symbol namespace so there is greater
enforcement of the symbol visibility.
Fixes: 548193cba2 ("test_firmware: add support for firmware_request_platform")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200909225354.3118328-1-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We can't run the tests for userspace bitmap parsing if set_fs() doesn't
exist, and it is about to go away for x86, powerpc with other major
architectures to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This font is derived from lib/fonts/font_6x10.c and is useful for small
OLED displays
Signed-off-by: Sven Schneider <s.schneider@arkona-technologies.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200820082137.5907-1-s.hauer@pengutronix.de
On non-EFI systems, it wasn't possible to test the platform firmware
loader because it will have never set "checked_fw" during __init.
Instead, allow the test code to override this check. Additionally split
the declarations into a private header file so it there is greater
enforcement of the symbol visibility.
Fixes: 548193cba2 ("test_firmware: add support for firmware_request_platform")
Cc: stable@vger.kernel.org
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200729175845.1745471-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
__kobject_del() is called from two places, in one where kobj is dereferenced
before and thus can't be NULL, and in the other the NULL check is done before
call. Drop unneeded conditional in __kobject_del().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20200803083520.5460-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.
Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit causes csd_lock_wait() to emit diagnostics when a CPU
fails to respond quickly enough to one of the smp_call_function()
family of function calls. These diagnostics are enabled by a new
CSD_LOCK_WAIT_DEBUG Kconfig option that depends on DEBUG_KERNEL.
This commit was inspired by an earlier patch by Josef Bacik.
[ paulmck: Fix for syzbot+0f719294463916a3fc0e@syzkaller.appspotmail.com ]
[ paulmck: Fix KASAN use-after-free issue reported by Qian Cai. ]
[ paulmck: Fix botched nr_cpu_ids comparison per Dan Carpenter. ]
[ paulmck: Apply Peter Zijlstra feedback. ]
Link: https://lore.kernel.org/lkml/00000000000042f21905a991ecea@google.com
Link: https://lore.kernel.org/lkml/0000000000002ef21705a9933cf3@google.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
commit 14775b0496 ("dyndbg: accept query terms like file=bar and
module=foo") added the combined keyword=value parsing poorly; revert
most of it, keeping the keyword & arg change.
Instead, fix the tokenizer for the new input, by terminating the
keyword (an unquoted word) on '=' as well as space, thus letting the
tokenizer work on the quoted argument, like it would have previously.
Also add a few debug-prints to show more parsing context, into
tokenizer and parse-query, and use "keyword, value" in others.
Fixes: 14775b0496 ("dyndbg: accept query terms like file=bar and module=foo")
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200831182210.850852-4-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c0d77828d ("dyndbg: export ddebug_exec_queries") had a few
problems:
- broken non DYNAMIC_DEBUG_CORE configs, sparse warning
- the exported function modifies query string, breaks on RO strings.
- func name follows internal convention, shouldn't be exposed as is.
1st is fixed in header with ifdefd function prototype or stub defn.
Also remove an obsolete HAVE-symbol ifdef-comment, and add others.
Fix others by wrapping existing internal function with a new one,
named in accordance with module-prefix naming convention, before
export hits v5.9.0. In new function, copy query string to a local
buffer, so users can pass hard-coded/RO queries, and internal function
can be used unchanged.
Fixes: 4c0d77828d ("dyndbg: export ddebug_exec_queries")
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200831182210.850852-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The zstd decompression code, as it is right now, will most likely fail
on 32-bit systems, as the default output buffer size causes the buffer's
end address to overflow.
Address this issue by setting a sane default to the default output size,
with a value that won't overflow the buffer's end address.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
While playing with [1] I saw that the handling
of CONFIG_DEBUG_INFO can be simplified.
[1] https://patchwork.kernel.org/patch/11716107/
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add two self test cases for the following case:
P0: P1: P2:
<in irq handler>
spin_lock_irq(&slock) read_lock(&rwlock)
write_lock_irq(&rwlock)
read_lock(&rwlock) spin_lock(&slock)
, which is a deadlock, as the read_lock() on P0 cannot get the lock
because of the fairness.
P0: P1: P2:
<in irq handler>
spin_lock(&slock) read_lock(&rwlock)
write_lock(&rwlock)
read_lock(&rwlock) spin_lock_irq(&slock)
, which is not a deadlock, as the read_lock() on P0 can get the lock
because it could use the unfair fastpass.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200807074238.1632519-19-boqun.feng@gmail.com
This reverts commit d82fed7529.
Since we now could handle mixed read-write deadlock detection well, the
self tests could be detected as expected, no need to use this
work-around.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200807074238.1632519-18-boqun.feng@gmail.com
Add those four test cases:
1. X --(ER)--> Y --(ER)--> Z --(ER)--> X is deadlock.
2. X --(EN)--> Y --(SR)--> Z --(ER)--> X is deadlock.
3. X --(EN)--> Y --(SR)--> Z --(SN)--> X is not deadlock.
4. X --(ER)--> Y --(SR)--> Z --(EN)--> X is not deadlock.
Those self testcases are valuable for the development of supporting
recursive read related deadlock detection.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200807074238.1632519-17-boqun.feng@gmail.com
Now since we can handle recursive read related irq inversion deadlocks
correctly, uncomment the irq_read_recursion2 and add more testcases.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200807074238.1632519-16-boqun.feng@gmail.com
As our chain cache doesn't differ read/write locks, so even we can
detect a read-lock/lock-write deadlock in check_noncircular(), we can
still be fooled if a read-lock/lock-read case(which is not a deadlock)
comes first.
So introduce this test case to test specific to the chain cache behavior
on detecting recursive read lock related deadlocks.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200807074238.1632519-14-boqun.feng@gmail.com
On the archs using QUEUED_RWLOCKS, read_lock() is not always a recursive
read lock, actually it's only recursive if in_interrupt() is true. So
change the annotation accordingly to catch more deadlocks.
Note we used to treat read_lock() as pure recursive read locks in
lib/locking-seftest.c, and this is useful, especially for the lockdep
development selftest, so we keep this via a variable to force switching
lock annotation for read_lock().
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200807074238.1632519-2-boqun.feng@gmail.com
The need for padding 64bit is implicitly checked by nla_align_64bit(), so
remove this explicit one.
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit adds an smp_call_function() torture test that repeatedly
invokes this function and complains if things go badly awry.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Changes kcsan-test module to support checking reports that include
compound instrumentation. Since we should not fail the test if this
support is unavailable, we have to add a config variable that the test
can use to decide what to check for.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, the nmi_cpu_backtrace() declines to produce backtraces for
idle CPUs. This is a good choice in the common case in which problems are
caused only by non-idle CPUs. However, there are occasionally situations
in which idle CPUs are helping to cause problems. This commit therefore
adds an nmi_backtrace.backtrace_idle kernel boot parameter that causes
nmi_cpu_backtrace() to dump stacks even of idle CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <linux-doc@vger.kernel.org>
The following build error for powerpc64 was reported by Nathan Chancellor:
"$ scripts/config --file arch/powerpc/configs/powernv_defconfig -e KERNEL_XZ
$ make -skj"$(nproc)" ARCH=powerpc CROSS_COMPILE=powerpc64le-linux- distclean powernv_defconfig zImage
...
In file included from arch/powerpc/boot/../../../lib/decompress_unxz.c:234,
from arch/powerpc/boot/decompress.c:38:
arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c: In function 'dec_main':
arch/powerpc/boot/../../../lib/xz/xz_dec_stream.c:586:4: error: 'fallthrough' undeclared (first use in this function)
586 | fallthrough;
| ^~~~~~~~~~~
This will end up affecting distribution configurations such as Debian
and OpenSUSE according to my testing. I am not sure what the solution
is, the PowerPC wrapper does not set -D__KERNEL__ so I am not sure
that compiler_attributes.h can be safely included."
In order to avoid these sort of problems, it seems that the best
solution is to use /* fall through */ comments instead of the
fallthrough pseudo-keyword macro in lib/, for now.
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Fixes: df561f6688 ("treewide: Use fallthrough pseudo-keyword")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All callers of these primitives will
* discard anything we might've copied in case of error
* ignore the csum value in case of error
* always pass 0xffffffff as the initial sum, so the
resulting csum value (in case of success, that is) will never be 0.
That suggest the following calling conventions:
* don't pass err_ptr - just return 0 on error.
* don't bother with zeroing destination, etc. in case of error
* don't pass the initial sum - just use 0xffffffff.
This commit does the minimal conversion in the instances of csum_and_copy_...();
the changes of actual asm code behind them are done later in the series.
Note that this asm code is often shared with csum_partial_copy_nocheck();
the difference is that csum_partial_copy_nocheck() passes 0 for initial
sum while csum_and_copy_..._user() pass 0xffffffff. Fortunately, we are
free to pass 0xffffffff in all cases and subsequent patches will use that
freedom without any special comments.
A part that could be split off: parisc and uml/i386 claimed to have
csum_and_copy_to_user() instances of their own, but those were identical
to the generic one, so we simply drop them. Not sure if it's worth
a separate commit...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Preparation for the change of calling conventions; right now all
callers pass 0 as initial sum. Passing 0xffffffff instead yields
the values comparable mod 0xffff and guarantees that 0 will not
be returned on success.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It's always 0. Note that we theoretically could use ~0U as well -
result will be the same modulo 0xffff, _if_ the damn thing did the
right thing for any value of initial sum; later we'll make use of
that when convenient.
However, unlike csum_and_copy_..._user(), there are instances that
did not work for arbitrary initial sums; c6x is one such.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
quite a few architectures have the same csum_partial_copy_nocheck() -
simply memcpy() the data and then return the csum of the copy.
hexagon, parisc, ia64, s390, um: explicitly spelled out that way.
arc, arm64, csky, h8300, m68k/nommu, microblaze, mips/GENERIC_CSUM, nds32,
nios2, openrisc, riscv, unicore32: end up picking the same thing spelled
out in lib/checksum.h (with varying amounts of perversions along the way).
everybody else (alpha, arm, c6x, m68k/mmu, mips/!GENERIC_CSUM, powerpc,
sh, sparc, x86, xtensa) have non-generic variants. For all except c6x
the declaration is in their asm/checksum.h. c6x uses the wrapper
from asm-generic/checksum.h that would normally lead to the lib/checksum.h
instance, but in case of c6x we end up using an asm function from arch/c6x
instead.
Screw that mess - have architectures with private instances define
_HAVE_ARCH_CSUM_AND_COPY in their asm/checksum.h and have the default
one right in net/checksum.h conditional on _HAVE_ARCH_CSUM_AND_COPY
*not* defined.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
gcc can transform the loop in a naive implementation of memset/memcpy
etc into a call to the function itself. This optimization is enabled by
-ftree-loop-distribute-patterns.
This has been the case for a while, but gcc-10.x enables this option at
-O2 rather than -O3 as in previous versions.
Add -ffreestanding, which implicitly disables this optimization with
gcc. It is unclear whether clang performs such optimizations, but
hopefully it will also not do so in a freestanding environment.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56888
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add range validation for NLA_BINARY, allowing validation of any
combination of combination minimum or maximum lengths, using the
existing NLA_POLICY_RANGE()/NLA_POLICY_FULL_RANGE() macros, just
like for integers where the value is checked.
Also make NLA_POLICY_EXACT_LEN(), NLA_POLICY_EXACT_LEN_WARN()
and NLA_POLICY_MIN_LEN() special cases of this, removing the old
types NLA_EXACT_LEN and NLA_MIN_LEN.
This allows us to save some code where both minimum and maximum
lengths are requires, currently the policy only allows maximum
(NLA_BINARY), minimum (NLA_MIN_LEN) or exact (NLA_EXACT_LEN), so
a range of lengths cannot be accepted and must be checked by the
code that consumes the attributes later.
Also, this allows advertising the correct ranges in the policy
export to userspace. Here, NLA_MIN_LEN and NLA_EXACT_LEN already
were special cases of NLA_BINARY with min and min/max length
respectively.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Patch series "iomap: Constify ioreadX() iomem argument", v3.
The ioread8/16/32() and others have inconsistent interface among the
architectures: some taking address as const, some not.
It seems there is nothing really stopping all of them to take pointer to
const.
This patch (of 4):
The ioreadX() and ioreadX_rep() helpers have inconsistent interface. On
some architectures void *__iomem address argument is a pointer to const,
on some not.
Implementations of ioreadX() do not modify the memory under the address so
they can be converted to a "const" version for const-safety and
consistency among architectures.
[krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()]
Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org
[akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c]
Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.com
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org
Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch replaces all memcpy() calls with LZ4_memcpy() which calls
__builtin_memcpy() so the compiler can inline it.
LZ4 relies heavily on memcpy() with a constant size being inlined. In x86
and i386 pre-boot environments memcpy() cannot be inlined because memcpy()
doesn't get defined as __builtin_memcpy().
An equivalent patch has been applied upstream so that the next import
won't lose this change [1].
I've measured the kernel decompression speed using QEMU before and after
this patch for the x86_64 and i386 architectures. The speed-up is about
10x as shown below.
Code Arch Kernel Size Time Speed
v5.8 x86_64 11504832 B 148 ms 79 MB/s
patch x86_64 11503872 B 13 ms 885 MB/s
v5.8 i386 9621216 B 91 ms 106 MB/s
patch i386 9620224 B 10 ms 962 MB/s
I also measured the time to decompress the initramfs on x86_64, i386, and
arm. All three show the same decompression speed before and after, as
expected.
[1] https://github.com/lz4/lz4/pull/890
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Gao Xiang <gaoxiang25@huawei.com>
Cc: Sven Schmidt <4sschmid@informatik.uni-hamburg.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Link: http://lkml.kernel.org/r/20200803194022.2966806-1-nickrterrell@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the counter
read function when time namespace support is enabled. Adding the pointer
is a NOOP for all other architectures because the compiler is supposed
to optimize that out when it is unused in the architecture specific
inline. The change also solved a similar problem for MIPS which
fortunately has time namespaces not yet enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another sequence
counter in the S390 implementation. A better solution is to utilize the
already existing VDSO sequence count for this. The core code now exposes
helper functions which allow to serialize against the timekeeper code
and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It now has
an embedded architecture specific struct embedded which defaults to an
empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support to
work from a common upstream base.
- A trivial comment fix.
-----BEGIN PGP SIGNATURE-----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=y8Z5
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timekeeping updates from Thomas Gleixner:
"A set of timekeeping/VDSO updates:
- Preparatory work to allow S390 to switch over to the generic VDSO
implementation.
S390 requires that the VDSO data pointer is handed in to the
counter read function when time namespace support is enabled.
Adding the pointer is a NOOP for all other architectures because
the compiler is supposed to optimize that out when it is unused in
the architecture specific inline. The change also solved a similar
problem for MIPS which fortunately has time namespaces not yet
enabled.
S390 needs to update clock related VDSO data independent of the
timekeeping updates. This was solved so far with yet another
sequence counter in the S390 implementation. A better solution is
to utilize the already existing VDSO sequence count for this. The
core code now exposes helper functions which allow to serialize
against the timekeeper code and against concurrent readers.
S390 needs extra data for their clock readout function. The initial
common VDSO data structure did not provide a way to add that. It
now has an embedded architecture specific struct embedded which
defaults to an empty struct.
Doing this now avoids tree dependencies and conflicts post rc1 and
allows all other architectures which work on generic VDSO support
to work from a common upstream base.
- A trivial comment fix"
* tag 'timers-urgent-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Delete repeated words in comments
lib/vdso: Allow to add architecture-specific vdso data
timekeeping/vsyscall: Provide vdso_update_begin/end()
vdso/treewide: Add vdso_data pointer argument to __arch_get_hw_counter()
Pull networking fixes from David Miller:
"Some merge window fallout, some longer term fixes:
1) Handle headroom properly in lapbether and x25_asy drivers, from
Xie He.
2) Fetch MAC address from correct r8152 device node, from Thierry
Reding.
3) In the sw kTLS path we should allow MSG_CMSG_COMPAT in sendmsg,
from Rouven Czerwinski.
4) Correct fdputs in socket layer, from Miaohe Lin.
5) Revert troublesome sockptr_t optimization, from Christoph Hellwig.
6) Fix TCP TFO key reading on big endian, from Jason Baron.
7) Missing CAP_NET_RAW check in nfc, from Qingyu Li.
8) Fix inet fastreuse optimization with tproxy sockets, from Tim
Froidcoeur.
9) Fix 64-bit divide in new SFC driver, from Edward Cree.
10) Add a tracepoint for prandom_u32 so that we can more easily
perform usage analysis. From Eric Dumazet.
11) Fix rwlock imbalance in AF_PACKET, from John Ogness"
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
net: openvswitch: introduce common code for flushing flows
af_packet: TPACKET_V3: fix fill status rwlock imbalance
random32: add a tracepoint for prandom_u32()
Revert "ipv4: tunnel: fix compilation on ARCH=um"
net: accept an empty mask in /sys/class/net/*/queues/rx-*/rps_cpus
net: ethernet: stmmac: Disable hardware multicast filter
net: stmmac: dwmac1000: provide multicast filter fallback
ipv4: tunnel: fix compilation on ARCH=um
vsock: fix potential null pointer dereference in vsock_poll()
sfc: fix ef100 design-param checking
net: initialize fastreuse on inet_inherit_port
net: refactor bind_bucket fastreuse into helper
net: phy: marvell10g: fix null pointer dereference
net: Fix potential memory leak in proto_register()
net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init
ionic_lif: Use devm_kcalloc() in ionic_qcq_alloc()
net/nfc/rawsock.c: add CAP_NET_RAW check.
hinic: fix strncpy output truncated compile warnings
drivers/net/wan/x25_asy: Added needed_headroom and a skb->len check
net/tls: Fix kmap usage
...
There has been some heat around prandom_u32() lately, and some people
were wondering if there was a simple way to determine how often
it was used, before considering making it maybe 10 times more expensive.
This tracepoint exports the generated pseudo random value.
Tested:
perf list | grep prandom_u32
random:prandom_u32 [Tracepoint event]
perf record -a [-g] [-C1] -e random:prandom_u32 sleep 1
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 259.748 MB perf.data (924087 samples) ]
perf report --nochildren
...
97.67% ksoftirqd/1 [kernel.vmlinux] [k] prandom_u32
|
---prandom_u32
prandom_u32
|
|--48.86%--tcp_v4_syn_recv_sock
| tcp_check_req
| tcp_v4_rcv
| ...
--48.81%--tcp_conn_request
tcp_v4_conn_request
tcp_rcv_state_process
...
perf script
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There exists duplicated "the" in the help text of CONFIG_PANIC_TIMEOUT,
Remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Link: http://lkml.kernel.org/r/1591103358-32087-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reset the member "test_fs" of the test configuration after a call of the
function "kfree_const" to a null pointer so that a double memory release
will not be performed.
Fixes: d9c6a72d6f ("kmod: add test driver to stress test the module loader")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Sergey Kvachonok <ravenexp@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tony Vroon <chainsaw@gentoo.org>
Cc: Christoph Hellwig <hch@infradead.org>
Link: http://lkml.kernel.org/r/20200610154923.27510-4-mcgrof@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The documentation of the kstrto*() functions describes kstrto*() as
"replacements" of the "obsolete" simple_strto*() functions. Both of these
terms are inaccurate: they're not replacements because they have different
behaviour, and the simple_strto*() are not obsolete because there are
cases where they have benefits over kstrto*().
Remove usage of the terms "replacement" and "obsolete" in reference to
simple_strto*(), and instead use the term "preferred over".
Fixes: 4c925d6031 ("kstrto*: add documentation")
Fixes: 885e68e8b7 ("kernel.h: update comment about simple_strto<foo>() functions")
Signed-off-by: Kars Mulder <kerneldev@karsmulder.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Eldad Zack <eldad@fogrefinery.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Petr Mladek <pmladek@suse.com>
Link: http://lkml.kernel.org/r/29b9-5f234c80-13-4e3aa200@244003027
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The documentation of the kstrto*() functions reference the simple_strtoull
function by "used as a replacement for [the obsolete] simple_strtoull".
All these functions describes themselves as replacements for the function
simple_strtoull, even though a function like kstrtol() would be more aptly
described as a replacement of simple_strtol().
Fix these references by making the documentation of kstrto*() reference
the closest simple_strto*() equivalent available. The functions
kstrto[u]int() do not have direct simple_strto[u]int() equivalences, so
these are made to refer to simple_strto[u]l() instead.
Furthermore, add parentheses after function names, as is standard in
kernel documentation.
Fixes: 4c925d6031 ("kstrto*: add documentation")
Signed-off-by: Kars Mulder <kerneldev@karsmulder.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Eldad Zack <eldad@fogrefinery.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Petr Mladek <pmladek@suse.com>
Link: http://lkml.kernel.org/r/1ee1-5f234c00-f3-165a6440@234394593
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Coly Li <colyli@suse.de> [crc64.c]
Link: http://lkml.kernel.org/r/20200726112154.16510-1-grandmaster@al2klimov.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since filp_open() returns an error pointer, we should use IS_ERR() to
check the return value and then return PTR_ERR() if failed to get the
actual return value instead of always -EINVAL.
E.g. without this patch:
[root@localhost loongson]# ls no_such_file
ls: cannot access no_such_file: No such file or directory
[root@localhost loongson]# modprobe test_lockup file_path=no_such_file lock_sb_umount time_secs=60 state=S
modprobe: ERROR: could not insert 'test_lockup': Invalid argument
[root@localhost loongson]# dmesg | tail -1
[ 126.100596] test_lockup: cannot find file_path
With this patch:
[root@localhost loongson]# ls no_such_file
ls: cannot access no_such_file: No such file or directory
[root@localhost loongson]# modprobe test_lockup file_path=no_such_file lock_sb_umount time_secs=60 state=S
modprobe: ERROR: could not insert 'test_lockup': Unknown symbol in module, or unknown parameter (see dmesg)
[root@localhost loongson]# dmesg | tail -1
[ 95.134362] test_lockup: failed to open no_such_file: -2
Fixes: aecd42df6d ("lib/test_lockup.c: add parameters for locking generic vfs locks")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/1595555407-29875-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since test_lockup is a test module to generate lockups, it is better to
limit TEST_LOCKUP to module (=m) or disabled (=n) because we can not use
the module parameters when CONFIG_TEST_LOCKUP=y.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Kees Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/1595555407-29875-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix sparse build warning:
lib/test_lockup.c:403:1: warning:
symbol '__pcpu_scope_test_works' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200707112252.9047-1-weiyongjun1@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the bitops test consists of two parts: one part is executed
during module load, the second part during module unload. This is
cumbersome for the user, as he has to perform two steps to execute all
tests, and is different from most (all?) other tests.
Merge the two parts, so both are executed during module load.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Link: http://lkml.kernel.org/r/20200706112900.7097-1-geert@linux-m68k.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Inspired by an original patch from Yury Norov: introduce a test for
bitmap_cut() that also makes sure functionality is as described for
partially overlapping src and dst.
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Yury Norov <yury.norov@gmail.com>
Link: http://lkml.kernel.org/r/5fc45e6bbd4fa837cd9577f8a0c1d639df90a4ce.1592155364.git.sbrivio@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "lib: Fix bitmap_cut() for overlaps, add test"
This patch (of 2):
Yury Norov reports that bitmap_cut() will not produce the right outcome if
src and dst partially overlap, with src pointing at some location after
dst, because the memmove() affects src before we store the bits that we
need to keep, that is, the bits preceding the cut -- as long as we the
beginning of the cut is not aligned to a long.
Fix this by storing those bits before the memmove().
Note that this is just a theoretical concern so far, as the only user of
this function, pipapo_drop() from the nftables set back-end implemented in
net/netfilter/nft_set_pipapo.c, always supplies entirely overlapping src
and dst.
Fixes: 2092767168 ("bitmap: Introduce bitmap_cut(): cut bits and shift remaining")
Reported-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Link: http://lkml.kernel.org/r/cover.1592155364.git.sbrivio@redhat.com
Link: http://lkml.kernel.org/r/003e38d4428cd6091ef00b5b03354f1bd7d9091e.1592155364.git.sbrivio@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Recently 0day reported many strange performance changes (regression or
improvement), in which there was no obvious relation between the culprit
commit and the benchmark at the first look, and it causes people to doubt
the test itself is wrong.
Upon further check, many of these cases are caused by the change to the
alignment of kernel text or data, as whole text/data of kernel are linked
together, change in one domain may affect alignments of other domains.
gcc has an option '-falign-functions=n' to force text aligned, and with
that option enabled, some of those performance changes will be gone, like
[1][2][3].
Add this option so that developers and 0day can easily find performance
bump caused by text alignment change, as tracking these strange bump is
quite time consuming. Though it can't help in other cases like data
alignment changes like [4].
Following is some size data for v5.7 kernel built with a RHEL config used
in 0day:
text data bss dec filename
19738771 13292906 5554236 38585913 vmlinux.noalign
19758591 13297002 5529660 38585253 vmlinux.align32
Raw vmlinux size in bytes:
v5.7 v5.7+align32
253950832 254018000 +0.02%
Some benchmark data, most of them have no big change:
* hackbench: [ -1.8%, +0.5%]
* fsmark: [ -3.2%, +3.4%] # ext4/xfs/btrfs
* kbuild: [ -2.0%, +0.9%]
* will-it-scale: [ -0.5%, +1.8%] # mmap1/pagefault3
* netperf:
- TCP_CRR [+16.6%, +97.4%]
- TCP_RR [-18.5%, -1.8%]
- TCP_STREAM [ -1.1%, +1.9%]
[1] https://lore.kernel.org/lkml/20200114085637.GA29297@shao2-debian/
[2] https://lore.kernel.org/lkml/20200330011254.GA14393@feng-iot/
[3] https://lore.kernel.org/lkml/1d98d1f0-fe84-6df7-f5bd-f4cb2cdb7f45@intel.com/
[4] https://lore.kernel.org/lkml/20200205123216.GO12867@shao2-debian/
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: http://lkml.kernel.org/r/1595475001-90945-1-git-send-email-feng.tang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=bkNQ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- run the checker (e.g. sparse) after the compiler
- remove unneeded cc-option tests for old compiler flags
- fix tar-pkg to install dtbs
- introduce ccflags-remove-y and asflags-remove-y syntax
- allow to trace functions in sub-directories of lib/
- introduce hostprogs-always-y and userprogs-always-y syntax
- various Makefile cleanups
* tag 'kbuild-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: stop filtering out $(GCC_PLUGINS_CFLAGS) from cc-option base
kbuild: include scripts/Makefile.* only when relevant CONFIG is enabled
kbuild: introduce hostprogs-always-y and userprogs-always-y
kbuild: sort hostprogs before passing it to ifneq
kbuild: move host .so build rules to scripts/gcc-plugins/Makefile
kbuild: Replace HTTP links with HTTPS ones
kbuild: trace functions in subdirectories of lib/
kbuild: introduce ccflags-remove-y and asflags-remove-y
kbuild: do not export LDFLAGS_vmlinux
kbuild: always create directories of targets
powerpc/boot: add DTB to 'targets'
kbuild: buildtar: add dtbs support
kbuild: remove cc-option test of -ffreestanding
kbuild: remove cc-option test of -fno-stack-protector
Revert "kbuild: Create directory for target DTB"
kbuild: run the checker after the compiler
ccflags-remove-$(CONFIG_FUNCTION_TRACER) += $(CC_FLAGS_FTRACE)
exists here in sub-directories of lib/ to keep the behavior of
commit 2464a609de ("ftrace: do not trace library functions").
Since that commit, not only the objects in lib/ but also the ones in
the sub-directories are excluded from ftrace (although the commit
description did not explicitly mention this).
However, most of library functions in sub-directories are not so hot.
Re-add them to ftrace.
Going forward, only the objects right under lib/ will be excluded.
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
CFLAGS_REMOVE_<file>.o filters out flags when compiling a particular
object, but there is no convenient way to do that for every object in
a directory.
Add ccflags-remove-y and asflags-remove-y to make it easily.
Use ccflags-remove-y to clean up some Makefiles.
The add/remove order works as follows:
[1] KBUILD_CFLAGS specifies compiler flags used globally
[2] ccflags-y adds compiler flags for all objects in the
current Makefile
[3] ccflags-remove-y removes compiler flags for all objects in the
current Makefile (New feature)
[4] CFLAGS_<file> adds compiler flags per file.
[5] CFLAGS_REMOVE_<file> removes compiler flags per file.
Having [3] before [4] allows us to remove flags from most (but not all)
objects in the current Makefile.
For example, kernel/trace/Makefile removes $(CC_FLAGS_FTRACE)
from all objects in the directory, then adds it back to
trace_selftest_dynamic.o and CFLAGS_trace_kprobe_selftest.o
The same applies to lib/livepatch/Makefile.
Please note ccflags-remove-y has no effect to the sub-directories.
In contrast, the previous notation got rid of compiler flags also from
all the sub-directories.
The following are not affected because they have no sub-directories:
arch/arm/boot/compressed/
arch/powerpc/xmon/
arch/sh/
kernel/trace/
However, lib/ has several sub-directories.
To keep the behavior, I added ccflags-remove-y to all Makefiles
in subdirectories of lib/, except the following:
lib/vdso/Makefile - Kbuild does not descend into this Makefile
lib/raid/test/Makefile - This is not used for the kernel build
I think commit 2464a609de ("ftrace: do not trace library functions")
excluded too much. In the next commit, I will remove ccflags-remove-y
from the sub-directories of lib/.
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Brendan Higgins <brendanhiggins@google.com> (KUnit)
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Pull misc vfs updates from Al Viro:
"No common topic whatsoever in those, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: define inode flags using bit numbers
iov_iter: Move unnecessary inclusion of crypto/hash.h
dlmfs: clean up dlmfs_file_{read,write}() a bit
- The biggest news in that the tracing ring buffer can now time events that
interrupted other ring buffer events. Before this change, if an interrupt
came in while recording another event, and that interrupt also had an
event, those events would all have the same time stamp as the event it
interrupted. Now, with the new design, those events will have a unique time
stamp and rightfully display the time for those events that were recorded
while interrupting another event.
- Bootconfig how has an "override" operator that lets the users have a
default config, but then add options to override the default.
- A fix was made to properly filter function graph tracing to the ftrace
PIDs. This came in at the end of the -rc cycle, and needs to be backported.
- Several clean ups, performance updates, and minor fixes as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXy3GOBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qphsAP9ci1jtrC2+cMBMCNKb/AFpA/nDaKsD
hpsDzvD0YPOmCAEA9QbZset8wUNG49R4FexP7egQ8Ad2S6Oa5f60jWleDQY=
=lH+q
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- The biggest news in that the tracing ring buffer can now time events
that interrupted other ring buffer events.
Before this change, if an interrupt came in while recording another
event, and that interrupt also had an event, those events would all
have the same time stamp as the event it interrupted.
Now, with the new design, those events will have a unique time stamp
and rightfully display the time for those events that were recorded
while interrupting another event.
- Bootconfig how has an "override" operator that lets the users have a
default config, but then add options to override the default.
- A fix was made to properly filter function graph tracing to the
ftrace PIDs. This came in at the end of the -rc cycle, and needs to
be backported.
- Several clean ups, performance updates, and minor fixes as well.
* tag 'trace-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (39 commits)
tracing: Add trace_array_init_printk() to initialize instance trace_printk() buffers
kprobes: Fix compiler warning for !CONFIG_KPROBES_ON_FTRACE
tracing: Use trace_sched_process_free() instead of exit() for pid tracing
bootconfig: Fix to find the initargs correctly
Documentation: bootconfig: Add bootconfig override operator
tools/bootconfig: Add testcases for value override operator
lib/bootconfig: Add override operator support
kprobes: Remove show_registers() function prototype
tracing/uprobe: Remove dead code in trace_uprobe_register()
kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler
ftrace: Fix ftrace_trace_task return value
tracepoint: Use __used attribute definitions from compiler_attributes.h
tracepoint: Mark __tracepoint_string's __used
trace : Have tracing buffer info use kvzalloc instead of kzalloc
tracing: Remove outdated comment in stack handling
ftrace: Do not let direct or IPMODIFY ftrace_ops be added to module and set trampolines
ftrace: Setup correct FTRACE_FL_REGS flags for module
tracing/hwlat: Honor the tracing_cpumask
tracing/hwlat: Drop the duplicate assignment in start_kthread()
tracing: Save one trace_event->type by using __TRACE_LAST_TYPE
...
Use OOB_TAG_OFF as access offset to land the access into the next granule.
Suggested-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Elena Petrova <lenaptr@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Link: http://lkml.kernel.org/r/403b259f1de49a7a3694531c851ac28326a586a8.1596199677.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/3063ab1411e92bce36061a96e25b651212e70ba6.1596544734.git.andreyknvl@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We use tag-based KASAN, then KASAN unit tests don't detect out-of-bounds
memory access. They need to be fixed.
With tag-based KASAN, the state of each 16 aligned bytes of memory is
encoded in one shadow byte and the shadow value is tag of pointer, so
we need to read next shadow byte, the shadow value is not equal to tag
value of pointer, so that tag-based KASAN will detect out-of-bounds
memory access.
[walter-zh.wu@mediatek.com: use KASAN_SHADOW_SCALE_SIZE instead of 13]
Link: http://lkml.kernel.org/r/20200708132524.11688-1-walter-zh.wu@mediatek.com
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Link: http://lkml.kernel.org/r/20200706115039.16750-1-walter-zh.wu@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Turn 'KASAN' into a menuconfig, to avoid cluttering its parent menu with
the suboptions if enabled. Use 'if KASAN ... endif' instead of having to
'depend on KASAN' for each entry.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Link: http://lkml.kernel.org/r/20200629104157.3242503-1-elver@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
percpu_counter's accuracy is related to its batch size. For a
percpu_counter with a big batch, its deviation could be big, so when the
counter's batch is runtime changed to a smaller value for better accuracy,
there could also be requirment to reduce the big deviation.
So add a percpu-counter sync function to be run on each CPU.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Tim Chen <tim.c.chen@intel.com>
Link: http://lkml.kernel.org/r/1594389708-60781-4-git-send-email-feng.tang@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The functionality in lib/ioremap.c deals with pagetables, vmalloc and
caches, so it naturally belongs to mm/ Moving it there will also allow
declaring p?d_alloc_track functions in an header file inside mm/ rather
than having those declarations in include/linux/mm.h
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200627143453.31835-8-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As said by Linus:
A symmetric naming is only helpful if it implies symmetries in use.
Otherwise it's actively misleading.
In "kzalloc()", the z is meaningful and an important part of what the
caller wants.
In "kzfree()", the z is actively detrimental, because maybe in the
future we really _might_ want to use that "memfill(0xdeadbeef)" or
something. The "zero" part of the interface isn't even _relevant_.
The main reason that kzfree() exists is to clear sensitive information
that should not be leaked to other future users of the same memory
objects.
Rename kzfree() to kfree_sensitive() to follow the example of the recently
added kvfree_sensitive() and make the intention of the API more explicit.
In addition, memzero_explicit() is used to clear the memory to make sure
that it won't get optimized away by the compiler.
The renaming is done by using the command sequence:
git grep -w --name-only kzfree |\
xargs sed -i 's/kzfree/kfree_sensitive/'
followed by some editing of the kfree_sensitive() kerneldoc and adding
a kzfree backward compatibility macro in slab.h.
[akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h]
[akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more]
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=oQEB
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
"Improvements and cleanups of livepatching selftests"
* tag 'livepatching-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: adopt to newer sysctl error format
selftests/livepatch: Use "comm" instead of "diff" for dmesg
selftests/livepatch: add test delimiter to dmesg
selftests/livepatch: refine dmesg 'taints' in dmesg comparison
selftests/livepatch: Don't clear dmesg when running tests
selftests/livepatch: fix mem leaks in test-klp-shadow-vars
selftests/livepatch: more verification in test-klp-shadow-vars
selftests/livepatch: rework test-klp-shadow-vars
selftests/livepatch: simplify test-klp-callbacks busy target tests
MIPS already uses and S390 will need the vdso data pointer in
__arch_get_hw_counter().
This works nicely as long as the architecture does not support time
namespaces in the VDSO. With time namespaces enabled the regular
accessor to the vdso data pointer __arch_get_vdso_data() will return the
namespace specific VDSO data page for tasks which are part of a
non-root time namespace. This would cause the architectures which need
the vdso data pointer in __arch_get_hw_counter() to access the wrong
vdso data page.
Add a vdso_data pointer argument to __arch_get_hw_counter() and hand it in
from the call sites in the core code. For architectures which do not need
the data pointer in their counter accessor function the compiler will just
optimize it out.
Fix up all existing architecture implementations and make MIPS utilize the
pointer instead of invoking the accessor function.
No functional change and no change in the resulting object code (except
MIPS).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/draft-87wo2ekuzn.fsf@nanos.tec.linutronix.de
Pull networking updates from David Miller:
1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.
2) Support UDP segmentation in code TSO code, from Eric Dumazet.
3) Allow flashing different flash images in cxgb4 driver, from Vishal
Kulkarni.
4) Add drop frames counter and flow status to tc flower offloading,
from Po Liu.
5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.
6) Various new indirect call avoidance, from Eric Dumazet and Brian
Vazquez.
7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
Yonghong Song.
8) Support querying and setting hardware address of a port function via
devlink, use this in mlx5, from Parav Pandit.
9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.
10) Switch qca8k driver over to phylink, from Jonathan McDowell.
11) In bpftool, show list of processes holding BPF FD references to
maps, programs, links, and btf objects. From Andrii Nakryiko.
12) Several conversions over to generic power management, from Vaibhav
Gupta.
13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
Yakunin.
14) Various https url conversions, from Alexander A. Klimov.
15) Timestamping and PHC support for mscc PHY driver, from Antoine
Tenart.
16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.
17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.
18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.
19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
drivers. From Luc Van Oostenryck.
20) XDP support for xen-netfront, from Denis Kirjanov.
21) Support receive buffer autotuning in MPTCP, from Florian Westphal.
22) Support EF100 chip in sfc driver, from Edward Cree.
23) Add XDP support to mvpp2 driver, from Matteo Croce.
24) Support MPTCP in sock_diag, from Paolo Abeni.
25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
infrastructure, from Jakub Kicinski.
26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.
27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.
28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.
29) Refactor a lot of networking socket option handling code in order to
avoid set_fs() calls, from Christoph Hellwig.
30) Add rfc4884 support to icmp code, from Willem de Bruijn.
31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.
32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.
33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.
34) Support TCP syncookies in MPTCP, from Flowian Westphal.
35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
Brivio.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
net: thunderx: initialize VF's mailbox mutex before first usage
usb: hso: remove bogus check for EINPROGRESS
usb: hso: no complaint about kmalloc failure
hso: fix bailout in error case of probe
ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
selftests/net: relax cpu affinity requirement in msg_zerocopy test
mptcp: be careful on subflow creation
selftests: rtnetlink: make kci_test_encap() return sub-test result
selftests: rtnetlink: correct the final return value for the test
net: dsa: sja1105: use detected device id instead of DT one on mismatch
tipc: set ub->ifindex for local ipv6 address
ipv6: add ipv6_dev_find()
net: openvswitch: silence suspicious RCU usage warning
Revert "vxlan: fix tos value before xmit"
ptp: only allow phase values lower than 1 period
farsync: switch from 'pci_' to 'dma_' API
wan: wanxl: switch from 'pci_' to 'dma_' API
hv_netvsc: do not use VF device if link is down
dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
net: macb: Properly handle phylink on at91sam9x
...
This series adds reporting of the page table order from hmm_range_fault()
and some optimization of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault(). This
makes it easier to establish a large/huge/etc mapping in the device's
page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages. For instance migrating
pages to a device does not require the device to invalidate pages
already in the device.
- Update nouveau and hmm_tests to use the above
-----BEGIN PGP SIGNATURE-----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=omAU
-----END PGP SIGNATURE-----
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull hmm updates from Jason Gunthorpe:
"Ralph has been working on nouveau's use of hmm_range_fault() and
migrate_vma() which resulted in this small series. It adds reporting
of the page table order from hmm_range_fault() and some optimization
of migrate_vma():
- Report the size of the page table mapping out of hmm_range_fault().
This makes it easier to establish a large/huge/etc mapping in the
device's page table.
- Allow devices to ignore the invalidations during migration in cases
where the migration is not going to change pages.
For instance migrating pages to a device does not require the
device to invalidate pages already in the device.
- Update nouveau and hmm_tests to use the above"
* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
mm/hmm/test: use the new migration invalidation
nouveau/svm: use the new migration invalidation
mm/notifier: add migration invalidation type
mm/migrate: add a flags parameter to migrate_vma
nouveau: fix storing invalid ptes
nouveau/hmm: support mapping large sysmem pages
nouveau: fix mapping 2MB sysmem pages
nouveau/hmm: fault one page at a time
mm/hmm: add tests for hmm_pfn_to_map_order()
mm/hmm: provide the page mapping order in hmm_range_fault()
Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in
a unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not
exposed to userspace. Needed for systems that want it
enabled, but do not trust users, so they can still use some
kernel functions that were otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylhOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylGdACeKqxm8IIDZycj0QjLUlPiEwVIROgAnjpf5jAB
mb4jMvgEGsB6/FwxypPG
=RUss
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of changes to the driver core, and some drivers
using the changes, for 5.9-rc1.
"Biggest" thing in here is the device link exposure in sysfs, to help
to tame the madness that is SoC device tree representations and driver
interactions with it.
Other stuff in here that is interesting is:
- device probe log helper so that drivers can report problems in a
unified way easier.
- devres functions added
- DEVICE_ATTR_ADMIN_* macro added to make it harder to write
incorrect sysfs file permissions
- documentation cleanups
- ability for debugfs to be present in the kernel, yet not exposed to
userspace. Needed for systems that want it enabled, but do not
trust users, so they can still use some kernel functions that were
otherwise disabled.
- other minor fixes and cleanups
The patches outside of drivers/base/ all have acks from the respective
subsystem maintainers to go through this tree instead of theirs.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (39 commits)
drm/bridge: lvds-codec: simplify error handling
drm/bridge/sii8620: fix resource acquisition error handling
driver core: add deferring probe reason to devices_deferred property
driver core: add device probe log helper
driver core: Avoid binding drivers to dead devices
Revert "test_firmware: Test platform fw loading on non-EFI systems"
firmware_loader: EFI firmware loader must handle pre-allocated buffer
selftest/firmware: Add selftest timeout in settings
test_firmware: Test platform fw loading on non-EFI systems
driver core: Change delimiter in devlink device's name to "--"
debugfs: Add access restriction option
tracefs: Remove unnecessary debug_fs checks.
driver core: Fix probe_count imbalance in really_probe()
kobject: remove unused KOBJ_MAX action
driver core: Fix sleeping in invalid context during device link deletion
driver core: Add waiting_for_supplier sysfs file for devices
driver core: Add state_synced sysfs file for devices that support it
driver core: Expose device link details in sysfs
driver core: Drop mention of obsolete bus rwsem from kernel-doc
debugfs: file: Remove unnecessary cast in kfree()
...
Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXylccQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymofgCfZ1CxNWd0ZVM0YIn8cY9gO6ON7MsAnRq48hvn
Vjf4rKM73GC11bVF4Gyy
=Xq1R
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
patches for 5.9-rc1. Lots of new driver submissions in here, and
cleanups and features for existing drivers.
Highlights are:
- habanalabs driver updates
- coresight driver updates
- nvmem driver updates
- huge number of "W=1" build warning cleanups from Lee Jones
- dyndbg updates
- virtbox driver fixes and updates
- soundwire driver updates
- mei driver updates
- phy driver updates
- fpga driver updates
- lots of smaller individual misc/char driver cleanups and fixes
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
habanalabs: remove unused but set variable 'ctx_asid'
nvmem: qcom-spmi-sdam: Enable multiple devices
dt-bindings: nvmem: SID: add binding for A100's SID controller
nvmem: update Kconfig description
nvmem: qfprom: Add fuse blowing support
dt-bindings: nvmem: Add properties needed for blowing fuses
dt-bindings: nvmem: qfprom: Convert to yaml
nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
nvmem: core: add support to auto devid
nvmem: core: Add nvmem_cell_read_u8()
nvmem: core: Grammar fixes for help text
nvmem: sc27xx: add sc2730 efuse support
nvmem: Enforce nvmem stride in the sysfs interface
MAINTAINERS: Add git tree for NVMEM FRAMEWORK
nvmem: sprd: Fix return value of sprd_efuse_probe()
drivers: android: Fix the SPDX comment style
drivers: android: Fix a variable declaration coding style issue
drivers: android: Remove braces for a single statement if-else block
drivers: android: Remove the use of else after return
drivers: android: Fix a variable declaration coding style issue
...
This Kunit update for Linux 5.9-rc1 consists of:
- Adds a generic kunit_resource API extending it to support
resources that are passed in to kunit in addition kunit
allocated resources. In addition, KUnit resources are now
refcounted to avoid passed in resources being released while
in use by kunit.
- Add support for named resources.
- Important bug fixes from Brendan Higgins and Will Chen
-----BEGIN PGP SIGNATURE-----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=kIIk
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- Add a generic kunit_resource API extending it to support resources
that are passed in to kunit in addition kunit allocated resources. In
addition, KUnit resources are now refcounted to avoid passed in
resources being released while in use by kunit.
- Add support for named resources.
- Important bug fixes from Brendan Higgins and Will Chen
* tag 'linux-kselftest-kunit-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: fix improper treatment of file location
kunit: tool: fix broken default args in unit tests
kunit: capture stderr on all make subprocess calls
Documentation: kunit: Remove references to --defconfig
kunit: add support for named resources
kunit: generalize kunit_resource API beyond allocated resources
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again for a
while. Unless we decide to switch to asciidoc or something...:)
- Lots of typo fixes, warning fixes, and more.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAl8oVkwPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YoW8H/jJ/xnXFn7tkgVPQAlL3k5HCnK7A5nDP9RVR
cg1pTx1cEFdjzxPlJyExU6/v+AImOvtweHXC+JDK7YcJ6XFUNYXJI3LxL5KwUXbY
BL/xRFszDSXH2C7SJF5GECcFYp01e/FWSLN3yWAh+g+XwsKiTJ8q9+CoIDkHfPGO
7oQsHKFu6s36Af0LfSgxk4sVB7EJbo8e4psuPsP5SUrl+oXRO43Put0rXkR4yJoH
9oOaB51Do5fZp8I4JVAqGXvpXoExyLMO4yw0mASm6YSZ3KyjR8Fae+HD9Cq4ZuwY
0uzb9K+9NEhqbfwtyBsi99S64/6Zo/MonwKwevZuhtsDTK4l4iU=
=JQLZ
-----END PGP SIGNATURE-----
Merge tag 'docs-5.9' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It's been a busy cycle for documentation - hopefully the busiest for a
while to come. Changes include:
- Some new Chinese translations
- Progress on the battle against double words words and non-HTTPS
URLs
- Some block-mq documentation
- More RST conversions from Mauro. At this point, that task is
essentially complete, so we shouldn't see this kind of churn again
for a while. Unless we decide to switch to asciidoc or
something...:)
- Lots of typo fixes, warning fixes, and more"
* tag 'docs-5.9' of git://git.lwn.net/linux: (195 commits)
scripts/kernel-doc: optionally treat warnings as errors
docs: ia64: correct typo
mailmap: add entry for <alobakin@marvell.com>
doc/zh_CN: add cpu-load Chinese version
Documentation/admin-guide: tainted-kernels: fix spelling mistake
MAINTAINERS: adjust kprobes.rst entry to new location
devices.txt: document rfkill allocation
PCI: correct flag name
docs: filesystems: vfs: correct flag name
docs: filesystems: vfs: correct sync_mode flag names
docs: path-lookup: markup fixes for emphasis
docs: path-lookup: more markup fixes
docs: path-lookup: fix HTML entity mojibake
CREDITS: Replace HTTP links with HTTPS ones
docs: process: Add an example for creating a fixes tag
doc/zh_CN: add Chinese translation prefer section
doc/zh_CN: add clearing-warn-once Chinese version
doc/zh_CN: add admin-guide index
doc:it_IT: process: coding-style.rst: Correct __maybe_unused compiler label
futex: MAINTAINERS: Re-add selftests directory
...
-----BEGIN PGP SIGNATURE-----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=ZcMq
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Herbert Xu made printk header file self-contained.
- Andy Shevchenko and Sergey Senozhatsky cleaned up console->setup()
error handling.
- Andy Shevchenko did some cleanups (e.g. sparse warning) in vsprintf
code.
- Minor documentation updates.
* tag 'printk-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
lib/vsprintf: Force type of flags value for gfp_t
lib/vsprintf: Replace custom spec to print decimals with generic one
lib/vsprintf: Replace hidden BUILD_BUG_ON() with static_assert()
printk: Make linux/printk.h self-contained
doc:kmsg: explicitly state the return value in case of SEEK_CUR
Replace HTTP links with HTTPS ones: vsprintf
hvc: unify console setup naming
console: Fix trivia typo 'change' -> 'chance'
console: Propagate error code from console ->setup()
tty: hvc: Return proper error code from console ->setup() hook
serial: sunzilog: Return proper error code from console ->setup() hook
serial: sunsab: Return proper error code from console ->setup() hook
mips: Return proper error code from console ->setup() hook
* ASUS WMI driver honors BAT1 name of the battery
(quite a few new laptops are using it)
* Dell WMI driver supports new key codes and backlight events
* ThinkPad ACPI driver now may use standard charge threshold interface,
it also has been updated to provide Laptop or Desktop mode to the user
* Intel Speed Select Technology gained support on Sapphire Rapids platform
* Regular update of Speed Select Technology tools
* Mellanox has been updated to support complex attributes
* PMC core driver has been fixed to show correct names for LPM0 register
* HTTP links were replaced by HTTPS ones where it applies
* Miscellaneous fixes and cleanups here and there
The following is an automated git shortlog grouped by driver:
acerhdf:
- Replace HTTP links with HTTPS ones
Add new intel_atomisp2_led driver:
- Add new intel_atomisp2_led driver
apple-gmux:
- Replace HTTP links with HTTPS ones
asus-nb-wmi:
- Drop duplicate DMI quirk structures
- add support for ASUS ROG Zephyrus G14 and G15
asus-wmi:
- allow BAT1 battery name
dell-wmi:
- add new dmi mapping for keycode 0xffff
- add new keymap type 0x0012
- add new backlight events
intel_cht_int33fe:
- Drop double check for ACPI companion device
intel-hid:
- Fix return value check in check_acpi_dev()
intel_pmc_core:
- fix bound check in pmc_core_mphy_pg_show()
- update TGL's LPM0 reg bit map name
intel-vbtn:
- Fix return value check in check_acpi_dev()
ISST:
- drop a duplicated word in isst_if.h
- Add new PCI device ids
pcengines-apuv2:
- revert wiring up simswitch GPIO as LED
platform/mellanox:
- Introduce string_upper() and string_lower() helpers
- Add string_upper() and string_lower() tests
- Extend FAN platform data description
- Add more definitions for system attributes
- Add new attribute for mlxreg-io sysfs interfaces
- Add presence register field for FAN devices
- Add support for complex attributes
- mlxreg-io: Add support for complex attributes
- mlxreg-hotplug: Add environmental data to uevent
- mlxreg-hotplug: Use capability register for attribute creation
- mlxreg-hotplug: Modify module license
system76-acpi:
- Fix brightness_set schedule while atomic
thinkpad_acpi:
- Make some symbols static
- add documentation for battery charge control
- use standard charge control attribute names
- remove unused defines
- Replace HTTP links with HTTPS ones
- not loading brightness_init when _BCL invalid
- lap or desk mode interface
- Revert "Use strndup_user() in dispatch_proc_write()"
tools/power/x86/intel-speed-select:
- Update version for v5.9
- Add retries for mail box commands
- Add option to delay mbox commands
- Ignore -o option processing on error
- Change path for caching topology info
-----BEGIN PGP SIGNATURE-----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=yvnW
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver updates from Andy Shevchenko:
- ASUS WMI driver honors BAT1 name of the battery (quite a few new
laptops are using it)
- Dell WMI driver supports new key codes and backlight events
- ThinkPad ACPI driver now may use standard charge threshold interface,
it also has been updated to provide Laptop or Desktop mode to the
user
- Intel Speed Select Technology gained support on Sapphire Rapids
platform
- Regular update of Speed Select Technology tools
- Mellanox has been updated to support complex attributes
- PMC core driver has been fixed to show correct names for LPM0
register
- HTTP links were replaced by HTTPS ones where it applies
- Miscellaneous fixes and cleanups here and there
* tag 'platform-drivers-x86-v5.9-1' of git://git.infradead.org/linux-platform-drivers-x86: (42 commits)
platform/x86: asus-nb-wmi: Drop duplicate DMI quirk structures
platform/x86: thinkpad_acpi: Make some symbols static
platform/x86: thinkpad_acpi: add documentation for battery charge control
platform/x86: thinkpad_acpi: use standard charge control attribute names
platform/x86: thinkpad_acpi: remove unused defines
platform/x86: ISST: drop a duplicated word in isst_if.h
tools/power/x86/intel-speed-select: Update version for v5.9
tools/power/x86/intel-speed-select: Add retries for mail box commands
tools/power/x86/intel-speed-select: Add option to delay mbox commands
tools/power/x86/intel-speed-select: Ignore -o option processing on error
tools/power/x86/intel-speed-select: Change path for caching topology info
platform/x86: acerhdf: Replace HTTP links with HTTPS ones
platform/x86: apple-gmux: Replace HTTP links with HTTPS ones
platform/x86: pcengines-apuv2: revert wiring up simswitch GPIO as LED
platform/x86: mlx-platform: Extend FAN platform data description
platform_data/mlxreg: Add presence register field for FAN devices
Documentation/ABI: Add new attribute for mlxreg-io sysfs interfaces
platform/mellanox: mlxreg-io: Add support for complex attributes
platform/x86: mlx-platform: Add more definitions for system attributes
platform_data/mlxreg: Add support for complex attributes
...
kernel and initrd images.
ZSTD has a very fast decompressor, yet it compresses better than gzip.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bARW
-----END PGP SIGNATURE-----
Merge tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"The main change in this cycle was to add support for ZSTD-compressed
kernel and initrd images.
ZSTD has a very fast decompressor, yet it compresses better than gzip"
* tag 'x86-boot-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation: dontdiff: Add zstd compressed files
.gitignore: Add ZSTD-compressed files
x86: Add support for ZSTD compressed kernel
x86: Bump ZO_z_extra_bytes margin for zstd
usr: Add support for zstd compressed initramfs
init: Add support for zstd compressed kernel
lib: Add zstd support to decompress
lib: Prepare zstd for preboot environment, improve performance
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the values
become larger. This is now replaced with more precise arithmetics,
using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl8oJDURHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1ixLg//bqWzFlfWirvngTgDxDnplwUTyKXmMCcq
R1IYhlyK2O5FxvhbRmdmW11W3yzyTPvgCs6Q/70negGaPNe2w1OxfxiK9NMKz5eu
M1LoXas7pL5g7Pr/ZxxHk/8VqJLV4t9MkodiiInmV6lTaznT3sU6a/kpYQjJyFnG
Tuu9jd6JhdRKmePDJnNmUBoGQ7JiOQDcX4HtkcQ3OA+An3624tmJzbW1yts+uj7J
ZWo2EY60RfbA9MxQXGPOaR/nAjngWs4Q6tddAh10mftsPq1gR2iFUKju1d31MQt/
RHLdiqJf+AyUC4popKG7a+7ilCKMBwPociSreTJNPyEUQ1X4AM3vUVk4yjUoiDph
k2WdsCF8/JRdhXg0NnrpPUqOaAbQj53EeXnitEb92E7WyTZgLOvAtpV//xZo6utp
2QHerfrQ9SoGQjz/ho78za5vQtV1x25yDhd+X4XV4QEhIy85G9/2JCpC/Kc/TXLf
OO7A4X69XztKTEJhP60g8ldCPUe4N2vbh1vKY6oAD8AFQVVNZ6n7375/Qa//b0/k
++hcYkPc2EK97/aBFdvzDgqb7aUo7Mtn2ibke16sQU4szulaoRuAHQG4jdGKMwbD
dk2VBoxyxeYFXWHsNneSe87+ha3sd0dSN0ul1EB/SlFrVELMvy634YXnMYGW8ima
PzyPB0ezpuA=
=PbO7
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
- Improve uclamp performance by using a static key for the fast path
- Add the "sched_util_clamp_min_rt_default" sysctl, to optimize for
better power efficiency of RT tasks on battery powered devices.
(The default is to maximize performance & reduce RT latencies.)
- Improve utime and stime tracking accuracy, which had a fixed boundary
of error, which created larger and larger relative errors as the
values become larger. This is now replaced with more precise
arithmetics, using the new mul_u64_u64_div_u64() helper in math64.h.
- Improve the deadline scheduler, such as making it capacity aware
- Improve frequency-invariant scheduling
- Misc cleanups in energy/power aware scheduling
- Add sched_update_nr_running tracepoint to track changes to nr_running
- Documentation additions and updates
- Misc cleanups and smaller fixes
* tag 'sched-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/doc: Factorize bits between sched-energy.rst & sched-capacity.rst
sched/doc: Document capacity aware scheduling
sched: Document arch_scale_*_capacity()
arm, arm64: Fix selection of CONFIG_SCHED_THERMAL_PRESSURE
Documentation/sysctl: Document uclamp sysctl knobs
sched/uclamp: Add a new sysctl to control RT default boost value
sched/uclamp: Fix a deadlock when enabling uclamp static key
sched: Remove duplicated tick_nohz_full_enabled() check
sched: Fix a typo in a comment
sched/uclamp: Remove unnecessary mutex_init()
arm, arm64: Select CONFIG_SCHED_THERMAL_PRESSURE
sched: Cleanup SCHED_THERMAL_PRESSURE kconfig entry
arch_topology, sched/core: Cleanup thermal pressure definition
trace/events/sched.h: fix duplicated word
linux/sched/mm.h: drop duplicated words in comments
smp: Fix a potential usage of stale nr_cpus
sched/fair: update_pick_idlest() Select group with lowest group_util when idle_cpus are equal
sched: nohz: stop passing around unused "ticks" parameter.
sched: Better document ttwu()
sched: Add a tracepoint to track rq->nr_running
...
- LKMM updates: mostly documentation changes, but also some new litmus tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again. Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the 'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>, decouple
lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3MTT
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
- LKMM updates: mostly documentation changes, but also some new litmus
tests for atomic ops.
- KCSAN updates: the most important change is that GCC 11 now has all
fixes in place to support KCSAN, so GCC support can be enabled again.
Also more annotations.
- futex updates: minor cleanups and simplifications
- seqlock updates: merge preparatory changes/cleanups for the
'associated locks' facilities.
- lockdep updates:
- simplify IRQ trace event handling
- add various new debug checks
- simplify header dependencies, split out <linux/lockdep_types.h>,
decouple lockdep from other low level headers some more
- fix NMI handling
- misc cleanups and smaller fixes
* tag 'locking-core-2020-08-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
kcsan: Improve IRQ state trace reporting
lockdep: Refactor IRQ trace events fields into struct
seqlock: lockdep assert non-preemptibility on seqcount_t write
lockdep: Add preemption enabled/disabled assertion APIs
seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount()
seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs
seqlock: Reorder seqcount_t and seqlock_t API definitions
seqlock: seqcount_t latch: End read sections with read_seqcount_retry()
seqlock: Properly format kernel-doc code samples
Documentation: locking: Describe seqlock design and usage
locking/qspinlock: Do not include atomic.h from qspinlock_types.h
locking/atomic: Move ATOMIC_INIT into linux/types.h
lockdep: Move list.h inclusion into lockdep.h
locking/lockdep: Fix TRACE_IRQFLAGS vs. NMIs
futex: Remove unused or redundant includes
futex: Consistently use fshared as boolean
futex: Remove needless goto's
futex: Remove put_futex_key()
rwsem: fix commas in initialisation
docs: locking: Replace HTTP links with HTTPS ones
...
Add the value override operator (":=") support to the bootconfig.
This value override operator will be useful for the bootloaders
which will only update the existing bootconfig according to the
bootloader boot options.
Without this override operator, the bootloader needs to parse
the existing bootconfig and update it. However, with this
assignment, it can just append the updated (partial) bootconfig
text at the tail of existing one without parsing it.
(Of course, it must update the size, checksum and magic,
but that will be done easily)
Link: https://lkml.kernel.org/r/159482882954.126704.16209517125614438640.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl8m7YwQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpt+dEAC7a0HYuX2OrkyawBnsgd1QQR/soC7surec
yDDa7SMM8cOq3935bfzcYHV9FWJszEGIknchiGb9R3/T+vmSohbvDsM5zgwya9u/
FHUIuTq324I6JWXKl30k4rwjiX9wQeMt+WZ5gC8KJYCWA296i2IpJwd0A45aaKuS
x4bTjxqknE+fD4gQiMUSt+bmuOUAp81fEku3EPapCRYDPAj8f5uoY7R2arT/POwB
b+s+AtXqzBymIqx1z0sZ/XcdZKmDuhdurGCWu7BfJFIzw5kQ2Qe3W8rUmrQ3pGut
8a21YfilhUFiBv+B4wptfrzJuzU6Ps0BXHCnBsQjzvXwq5uFcZH495mM/4E4OJvh
SbjL2K4iFj+O1ngFkukG/F8tdEM1zKBYy2ZEkGoWKUpyQanbAaGI6QKKJA+DCdBi
yPEb7yRAa5KfLqMiocm1qCEO1I56HRiNHaJVMqCPOZxLmpXj19Fs71yIRplP1Trv
GGXdWZsccjuY6OljoXWdEfnxAr5zBsO3Yf2yFT95AD+egtGsU1oOzlqAaU1mtflw
ABo452pvh6FFpxGXqz6oK4VqY4Et7WgXOiljA4yIGoPpG/08L1Yle4eVc2EE01Jb
+BL49xNJVeUhGFrvUjPGl9kVMeLmubPFbmgrtipW+VRg9W8+Yirw7DPP6K+gbPAR
RzAUdZFbWw==
=abJG
-----END PGP SIGNATURE-----
Merge tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Good amount of cleanups and tech debt removals in here, and as a
result, the diffstat shows a nice net reduction in code.
- Softirq completion cleanups (Christoph)
- Stop using ->queuedata (Christoph)
- Cleanup bd claiming (Christoph)
- Use check_events, moving away from the legacy media change
(Christoph)
- Use inode i_blkbits consistently (Christoph)
- Remove old unused writeback congestion bits (Christoph)
- Cleanup/unify submission path (Christoph)
- Use bio_uninit consistently, instead of bio_disassociate_blkg
(Christoph)
- sbitmap cleared bits handling (John)
- Request merging blktrace event addition (Jan)
- sysfs add/remove race fixes (Luis)
- blk-mq tag fixes/optimizations (Ming)
- Duplicate words in comments (Randy)
- Flush deferral cleanup (Yufen)
- IO context locking/retry fixes (John)
- struct_size() usage (Gustavo)
- blk-iocost fixes (Chengming)
- blk-cgroup IO stats fixes (Boris)
- Various little fixes"
* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
block: blk-timeout: delete duplicated word
block: blk-mq-sched: delete duplicated word
block: blk-mq: delete duplicated word
block: genhd: delete duplicated words
block: elevator: delete duplicated word and fix typos
block: bio: delete duplicated words
block: bfq-iosched: fix duplicated word
iocost_monitor: start from the oldest usage index
iocost: Fix check condition of iocg abs_vdebt
block: Remove callback typedefs for blk_mq_ops
block: Use non _rcu version of list functions for tag_set_list
blk-cgroup: show global disk stats in root cgroup io.stat
blk-cgroup: make iostat functions visible to stat printing
block: improve discard bio alignment in __blkdev_issue_discard()
block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
block: defer flush request no matter whether we have elevator
block: make blk_timeout_init() static
block: remove retry loop in ioc_release_fn()
block: remove unnecessary ioc nested locking
block: integrate bd_start_claiming into __blkdev_get
...
Pull crypto updates from Herbert Xu:
"API:
- Add support for allocating transforms on a specific NUMA Node
- Introduce the flag CRYPTO_ALG_ALLOCATES_MEMORY for storage users
Algorithms:
- Drop PMULL based ghash on arm64
- Fixes for building with clang on x86
- Add sha256 helper that does the digest in one go
- Add SP800-56A rev 3 validation checks to dh
Drivers:
- Permit users to specify NUMA node in hisilicon/zip
- Add support for i.MX6 in imx-rngc
- Add sa2ul crypto driver
- Add BA431 hwrng driver
- Add Ingenic JZ4780 and X1000 hwrng driver
- Spread IRQ affinity in inside-secure and marvell/cesa"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (157 commits)
crypto: sa2ul - Fix inconsistent IS_ERR and PTR_ERR
hwrng: core - remove redundant initialization of variable ret
crypto: x86/curve25519 - Remove unused carry variables
crypto: ingenic - Add hardware RNG for Ingenic JZ4780 and X1000
dt-bindings: RNG: Add Ingenic RNG bindings.
crypto: caam/qi2 - add module alias
crypto: caam - add more RNG hw error codes
crypto: caam/jr - remove incorrect reference to caam_jr_register()
crypto: caam - silence .setkey in case of bad key length
crypto: caam/qi2 - create ahash shared descriptors only once
crypto: caam/qi2 - fix error reporting for caam_hash_alloc
crypto: caam - remove deadcode on 32-bit platforms
crypto: ccp - use generic power management
crypto: xts - Replace memcpy() invocation with simple assignment
crypto: marvell/cesa - irq balance
crypto: inside-secure - irq balance
crypto: ecc - SP800-56A rev 3 local public key validation
crypto: dh - SP800-56A rev 3 local public key validation
crypto: dh - check validity of Z before export
lib/mpi: Add mpi_sub_ui()
...
Pull networking fixes from David Miller:
1) Encap offset calculation is incorrect in esp6, from Sabrina Dubroca.
2) Better parameter validation in pfkey_dump(), from Mark Salyzyn.
3) Fix several clang issues on powerpc in selftests, from Tanner Love.
4) cmsghdr_from_user_compat_to_kern() uses the wrong length, from Al
Viro.
5) Out of bounds access in mlx5e driver, from Raed Salem.
6) Fix transfer buffer memleak in lan78xx, from Johan Havold.
7) RCU fixups in rhashtable, from Herbert Xu.
8) Fix ipv6 nexthop refcnt leak, from Xiyu Yang.
9) vxlan FDB dump must be done under RCU, from Ido Schimmel.
10) Fix use after free in mlxsw, from Ido Schimmel.
11) Fix map leak in HASH_OF_MAPS bpf code, from Andrii Nakryiko.
12) Fix bug in mac80211 Tx ack status reporting, from Vasanthakumar
Thiagarajan.
13) Fix memory leaks in IPV6_ADDRFORM code, from Cong Wang.
14) Fix bpf program reference count leaks in mlx5 during
mlx5e_alloc_rq(), from Xin Xiong.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits)
vxlan: fix memleak of fdb
rds: Prevent kernel-infoleak in rds_notify_queue_get()
net/sched: The error lable position is corrected in ct_init_module
net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
net/mlx5e: E-Switch, Specify flow_source for rule with no in_port
net/mlx5e: E-Switch, Add misc bit when misc fields changed for mirroring
net/mlx5e: CT: Support restore ipv6 tunnel
net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
ionic: unlock queue mutex in error path
atm: fix atm_dev refcnt leaks in atmtcp_remove_persistent
net: ethernet: mtk_eth_soc: fix MTU warnings
net: nixge: fix potential memory leak in nixge_probe()
devlink: ignore -EOPNOTSUPP errors on dumpit
rxrpc: Fix race between recvmsg and sendmsg on immediate call failure
MAINTAINERS: Replace Thor Thayer as Altera Triple Speed Ethernet maintainer
selftests/bpf: fix netdevsim trap_flow_action_cookie read
ipv6: fix memory leaks on IPV6_ADDRFORM path
net/bpfilter: Initialize pos in __bpfilter_process_sockopt
igb: reinit_locked() should be called with rtnl_lock
e1000e: continue to init PHY even when failed to disable ULP
...
Pull v5.9 KCSAN bits from Paul E. McKenney.
Perhaps the most important change is that GCC 11 now has all fixes in place
to support KCSAN, so GCC support can be enabled again.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sparse is not happy about restricted type being assigned:
lib/vsprintf.c:1940:23: warning: incorrect type in assignment (different base types)
lib/vsprintf.c:1940:23: expected unsigned long [assigned] flags
lib/vsprintf.c:1940:23: got restricted gfp_t [usertype]
Force type of flags value to make sparse happy.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20200731180825.30575-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
When printing phandle via %pOFp the custom spec is used. First of all,
it has a SMALL flag which makes no sense for decimal numbers. Second,
we have already default spec for decimal numbers. Use the latter in
the %pOFp case as well.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: Grant Likely <grant.likely@arm.com>
Link: https://lore.kernel.org/r/20200731180825.30575-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
First of all, there is no compile time check for the SMALL
to be ' ' (0x20, i.e. space). Second, for ZEROPAD the check
is hidden in the code.
For better maintenance replace BUILD_BUG_ON() with static_assert()
for ZEROPAD and move it closer to the definition. While at it,
introduce check for SMALL.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Link: https://lore.kernel.org/r/20200731180825.30575-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Conflicts:
arch/arm/include/asm/percpu.h
As Stephen Rothwell noted, there's a conflict between this commit
in locking/core:
a21ee6055c ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables")
and this fresh upstream commit:
aa54ea903a ("ARM: percpu.h: fix build error")
a21ee6055c is a simpler solution to the dependency problem and doesn't
further increase header hell - so this conflict resolution effectively
reverts aa54ea903a and uses the a21ee6055c solution.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Add unzstd() and the zstd decompress interface.
- Add zstd support to decompress_method().
The decompress_method() and unzstd() functions are used to decompress
the initramfs and the initrd. The __decompress() function is used in
the preboot environment to decompress a zstd compressed kernel.
The zstd decompression function allows the input and output buffers to
overlap because that is used by x86 kernel decompression.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-3-nickrterrell@gmail.com
These changes are necessary to get the build to work in the preboot
environment, and to get reasonable performance:
- Remove a double definition of the CHECK_F macro when the zstd
library is amalgamated.
- Switch ZSTD_copy8() to __builtin_memcpy(), because in the preboot
environment on x86 gcc can't inline `memcpy()` otherwise.
- Limit the gcc hack in ZSTD_wildcopy() to the broken gcc version. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81388.
ZSTD_copy8() and ZSTD_wildcopy() are in the core of the zstd hot loop.
So outlining these calls to memcpy(), and having an extra branch are very
detrimental to performance.
Signed-off-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200730190841.2071656-2-nickrterrell@gmail.com
Add mpi_sub_ui() based on Gnu MP mpz_sub_ui() function from file
mpz/aors_ui.h[1] from change id 510b83519d1c adapting the code to the
kernel's data structures, helper functions and coding style and also
removing the defines used to produce mpz_sub_ui() and mpz_add_ui()
from the same code.
[1] https://gmplib.org/repo/gmp-6.2/file/510b83519d1c/mpz/aors.h
Signed-off-by: Marcelo Henrique Cerri <marcelo.cerri@canonical.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It turns out that the plugin right now ends up being really unhappy
about the change from 'static' to 'extern' storage that happened in
commit f227e3ec3b ("random32: update the net random state on interrupt
and activity").
This is probably a trivial fix for the latent_entropy plugin, but for
now, just remove net_rand_state from the list of things the plugin
worries about.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This modifies the first 32 bits out of the 128 bits of a random CPU's
net_rand_state on interrupt or CPU activity to complicate remote
observations that could lead to guessing the network RNG's internal
state.
Note that depending on some network devices' interrupt rate moderation
or binding, this re-seeding might happen on every packet or even almost
never.
In addition, with NOHZ some CPUs might not even get timer interrupts,
leaving their local state rarely updated, while they are running
networked processes making use of the random state. For this reason, we
also perform this update in update_process_times() in order to at least
update the state when there is user or system activity, since it's the
only case we care about.
Reported-by: Amit Klein <aksecurity@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Asserting that preemption is enabled or disabled is a critical sanity
check. Developers are usually reluctant to add such a check in a
fastpath as reading the preemption count can be costly.
Extend the lockdep API with macros asserting that preemption is disabled
or enabled. If lockdep is disabled, or if the underlying architecture
does not support kernel preemption, this assert has no runtime overhead.
References: f54bb2ec02 ("locking/lockdep: Add IRQs disabled/enabled assertion APIs: ...")
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-8-a.darwish@linutronix.de
This patch restores the RCU marking on bucket_table->buckets as
it really does need RCU protection. Its removal had led to a fatal
bug.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pldmfw library is used to implement common logic needed to flash
devices based on firmware files using the format described by the PLDM
for Firmware Update standard.
This library consists of logic to parse the PLDM file format from
a firmware file object, as well as common logic for sending the relevant
PLDM header data to the device firmware.
A simple ops table is provided so that device drivers can implement
device specific hardware interactions while keeping the common logic to
the pldmfw library.
This library will be used by the Intel ice networking driver as part of
implementing device flash update via devlink. The library aims to be
vendor and device agnostic. For this reason, it has been placed in
lib/pldmfw, in the hopes that other devices which use the PLDM firmware
file format may benefit from it in the future. However, do note that not
all features defined in the PLDM standard have been implemented.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new MMU_NOTIFY_MIGRATE event to skip MMU invalidations of device
private memory and handle the invalidation in the driver as part of
migrating device private memory.
Link: https://lore.kernel.org/r/20200723223004.9586-6-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The src_owner field in struct migrate_vma is being used for two purposes,
it acts as a selection filter for which types of pages are to be migrated
and it identifies device private pages owned by the caller.
Split this into separate parameters so the src_owner field can be used
just to identify device private pages owned by the caller of
migrate_vma_setup().
Rename the src_owner field to pgmap_owner to reflect it is now used only
to identify which device private pages to migrate.
Link: https://lore.kernel.org/r/20200723223004.9586-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Prior to commit:
859d069ee1 ("lockdep: Prepare for NMI IRQ state tracking")
IRQ state tracking was disabled in NMIs due to nmi_enter()
doing lockdep_off() -- with the obvious requirement that NMI entry
call nmi_enter() before trace_hardirqs_off().
[ AFAICT, PowerPC and SH violate this order on their NMI entry ]
However, that commit explicitly changed lockdep_hardirqs_*() to ignore
lockdep_off() and breaks every architecture that has irq-tracing in
it's NMI entry that hasn't been fixed up (x86 being the only fixed one
at this point).
The reason for this change is that by ignoring lockdep_off() we can:
- get rid of 'current->lockdep_recursion' in lockdep_assert_irqs*()
which was going to to give header-recursion issues with the
seqlock rework.
- allow these lockdep_assert_*() macros to function in NMI context.
Restore the previous state of things and allow an architecture to
opt-in to the NMI IRQ tracking support, however instead of relying on
lockdep_off(), rely on in_nmi(), both are part of nmi_enter() and so
over-all entry ordering doesn't need to change.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200727124852.GK119549@hirez.programming.kicks-ass.net
This reverts commit 2d38dbf89a as it broke
the build in linux-next
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 2d38dbf89a ("test_firmware: Test platform fw loading on non-EFI systems")
Cc: stable@vger.kernel.org
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200727165539.0e8797ab@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
On non-EFI systems, it wasn't possible to test the platform firmware
loader because it will have never set "checked_fw" during __init.
Instead, allow the test code to override this check. Additionally split
the declarations into a private header file so it there is greater
enforcement of the symbol visibility.
Fixes: 548193cba2 ("test_firmware: add support for firmware_request_platform")
Cc: stable@vger.kernel.org
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200724213640.389191-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Export ddebug_exec_queries() for use by modules.
This will allow module authors to control all their *pr_debug*s
dynamically. And since ddebug_exec_queries() is what implements
"echo $query >control", it gives the same per-callsite control.
Virtues of this:
- simplicity. just an export.
- full control over any/all subsets of callsites.
- same "query/command-string" in code and console
- full callsite selectivity with module file line format
Format in particular deserves special attention; it is where
low-hanging fruit will be found.
Consider: drivers/gpu/drm/amd/display/include/logger_types.h:
#define DC_LOG_SURFACE(...) pr_debug("[SURFACE]:"__VA_ARGS__)
#define DC_LOG_HW_LINK_TRAINING(...) pr_debug("[HW_LINK_TRAINING]:"__VA_ARGS__)
.. 9 more ..
Thats 11 string prefixes, used in 804 places in drivers/gpu/**
Clearly this is a systematized classification of those callsites.
And one I'd expect to see repeated often.
Using ddebug_exec_queries(), authors can select on those prefixes
as a unitary set, equivalent to:
echo "module=MODULE_NAME format=^[SURFACE]: +p" >control
Trivially, those sets can be subsected with the other query terms too,
say file=foo, should the author see fit.
Perhaps as important, users can modify the set of enabled callsites,
presumably to aid debugging by enabling helpful debug callsites, and
disabling those that just clutter the info.
Authors could even alter [fmlt] flags, though I dont see a good reason
why they would. Perhaps harnessed by bug-logging automation to get
fuller, or more minimal bug-reports.
DRM
drm has both drm.debug, which defines 32 categories of drm_printk
logging, and entirely separate uses of pr_debug, which are dynamic on
this i915 laptop, running mainline. So I can observe and report on
both.
The i915 driver has 118 dyndbg callsites, with following
"classifications" defined in drivers/gpu/drm/i915/gvt/**
$ grep 915 /proc/dynamic_debug/control | cut -d= -f2 | cut -d: -f1,2 | sort -u
_ "gvt: cmd
_ "gvt: core
_ "gvt: dpy
_ "gvt: el
_ "gvt: irq
_ "gvt: mm
_ "gvt: mmio
_ "gvt: render
_ "gvt: sched
_ "%s for root hub!\012"
_ "Vendor defined info completion code %u\012"
This classification is entirely out-of-band for control by drm.debug,
and is only available to root user at the console. But module authors
can activate them with ddebug_exec_queries(sprintf("format=^%s +p")),
and then decide how to expose the groups to the user for max utility.
drm.debug
drm.debug has 32 bit-flags, and matching enum drm_debug_category
values to classify the ~2943 DRM_DEBUG*() callsites in drivers/gpu
The drm.debug callback could invoke ddebug_exec_queries() with 32
different hardcoded query strings, needing only (bit) ? " +p" : " -p"
added.
I briefly enabled drm.debug=0xff on my i915 laptop, which yielded
these unique prefixes: (dmesg | cut -c17- | cut -d\] -f1 | sort -u)
[drm:drm_atomic_check_only [drm
[drm:drm_atomic_get_crtc_state [drm
[drm:drm_atomic_get_plane_state [drm
[drm:drm_atomic_nonblocking_commit [drm
[drm:drm_atomic_set_fb_for_plane [drm
[drm:drm_atomic_state_default_clear [drm
[drm:__drm_atomic_state_free [drm
[drm:drm_atomic_state_init [drm
[drm:drm_crtc_vblank_helper_get_vblank_timestamp_internal [drm
[drm:drm_handle_vblank [drm
[drm:drm_ioctl [drm
[drm:drm_mode_addfb2 [drm
[drm:drm_mode_object_get [drm
[drm:drm_mode_object_put.part.0 [drm
[drm:drm_update_vblank_count [drm
[drm:drm_vblank_enable [drm
[drm:drm_vblank_restore [drm
[drm:vblank_disable_fn [drm
i915 0000:00:02.0: [drm:gen9_set_dc_state [i915
i915 0000:00:02.0: [drm:intel_atomic_get_global_obj_state [i915
i915 0000:00:02.0: [drm:__intel_display_power_get_domain.part.0 [i915
i915 0000:00:02.0: [drm:__intel_display_power_put_domain [i915
i915 0000:00:02.0: [drm:intel_plane_atomic_calc_changes [i915
i915 0000:00:02.0: [drm:skl_enable_dc6 [i915
Several good format=^prefixes are apparent there, and some misses.
^[drm:drm_atomic_ # misses: [drm:__drm_atomic_state_free [drm
^[drm:drm_ioctl
^[drm:drm_mode
^[drm:drm_vblank_ # misses: [drm:drm_update_vblank_count & [drm:vblank_disable_fn
Its not a perfect 1:1 single format-match per class, but the misses
above can be covered with 1 & 2 additional queries, which can be
concatenated together with ";" separators and submitted with 1 call.
Benefits:
For drm, adapting DRM_DEBUG to use dynamic-debug inside could
replicate (and thereby obsolete) lots of bit-checking in current
DRM_DEBUG callsites, at least with JUMP_LABEL optimized code.
ddebug_exec_queries() and a handful of fixed query-strings can select
and thereby control the already classified callsites.
With the classes mapped to queries, the enum type and parameter can be
eliminated (folded away with macro magic), at least for DYNAMIC_DEBUG
& JUMP_LABEL builds.
Is it safe ?
ddebug_exec_queries() is currently exposed to user space in
several limited ways;
1 it is called from module-load callback, where it implements the
$modname.dyndbg=+p "fake" parameter provided to all modules.
2 it handles query input via >control directly
IOW, it is "fully" exposed to local root user; exposing the same
functionality to other kernel modules is no additional risk.
The other standard issue to check is locking:
dyndbg has a single mutex, taken by ddebug_change to handle >control,
and by ddebug_proc_(start|stop) to span `cat control`. Queries
submitted via export will typically have module specified, which
dramatically cuts the scan by ddebug_change vs "module=* +p".
ISTM this proposed export presents no locking problems.
TLDR;
It would be interesting to see how drm.dyndbg=$QUERY and
drm.debug=$HEXY would interact; it might be order dependent, as
if given as modprobe args or in /etc/modprobe.d/
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-19-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For log-message output, reduce column space consumed by current
pr_fmt by dropping __func__ and shortening "dynamic_debug" to
"dyndbg". This improves readability on narrow consoles, and better
matches other kernel boot info messages.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-18-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This should work:
echo module=amd* format=^[IF_TRACE]: +p >/proc/dynamic_debug/control
consider drivers/gpu/drm/amd/display/include/logger_types.h:
It has 11 defines like:
#define DC_LOG_IF_TRACE(...) pr_debug("[IF_TRACE]:"__VA_ARGS__)
These defines are used 804 times at recent count; they are a good use
case to evaluate existing format-message based classifications of
*pr_debug*. Those macros prefix the supplied format with a fixed
string, I'd expect most existing message classification schemes to do
something similar.
Hence we want to be able to anchor our match to the beginning of the
format string, allowing easy construction of clear and precise
queries, leveraging the existing classification scheme to enable and
disable those callsites.
Note that unlike other search terms, formats are implicitly floating
substring matches, without the need for explicit wildcards.
This makes no attempt at wider regex features, just the one we need.
TLDR: Using the anchor also means the []s are less helpful for
disamiguating the prefix from a random in-message occurrence, allowing
shorter prefixes.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-17-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
flags & mask are used together everywhere, and are passed around
together between multiple functions; they belong together in a struct,
call that struct flag_settings.
Use struct flag_settings to rework 3 functions:
- ddebug_exec_query - declares query and flag-settings,
calls other 2, passing flags
- ddebug_parse_flags - fills flag_settings and returns
- ddebug_change - test all callsites against query,
modify passing sites.
benefits:
- bit-banging always needs flags & mask, best together.
- simpler function signatures
- 1 less parameter, less stack overhead
no functional changes
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-16-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current code expects "keyword" "arg" as 2 words, space separated.
Change to also accept "keyword=arg" form as well, and drop !(nwords%2)
requirement. Then in rest of function, use new keyword, arg variables
instead of word[i], word[i+1]
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-15-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Accept these additional query forms:
echo "file $filestr +_" > control
path/to/file.c:100 # as from control, column 1
path/to/file.c:1-100 # or any legal line-range
path/to/file.c:func_A # as from an editor/browser
path/to/file.c:drm_* # wildcards still work
path/to/file.c:*_foo # lead wildcard too
1st 2 examples are treated as line-ranges, 3-5 are treated as func's
Doc these changes, and sprinkle in a few extra wild-card examples and
trailing # explanation texts.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-14-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make the code-block reusable to later handle "file foo.c:101-200" etc.
This is a 99% code move, with reindent, function wrap&call, +pr_debug.
no functional changes.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-13-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
loadable modules are the last in on this list, and are the only
modules that could be removed. ddebug_remove_module() searches from
head, but ddebug_add_module() uses list_add_tail(). Change it to
list_add() for a micro-optimization.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-11-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ddebug_exec_query declares an auto var, and passes it to
ddebug_parse_query, which memsets it before using it. Drop that
memset, instead initialize the variable in the caller; let the
compiler decide how to do it.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-10-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this pr_err attempts to print the string after the OP, but the string
has been parsed and chopped up, so looks empty.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-9-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ddebug_describe_flags() currently fills a caller provided string buffer,
after testing its size (also passed) in a BUG_ON. Fix this by
replacing them with a known-big-enough string buffer wrapped in a
struct, and passing that instead.
Also simplify ddebug_describe_flags() flags parameter from a struct to
a member in that struct, and hoist the member deref up to the caller.
This makes the function reusable (soon) where flags are unpacked.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
during dyndbg init, verbose logging prints its ram overhead. It
counted strlens of struct _ddebug's 4 string members, in all callsite
entries, which would be approximately correct if each had been
mallocd. But they are pointers into shared .rodata; for example, all
10 kobject callsites have identical filename, module values.
Its best not to count that memory at all, since we cannot know they
were linked in because of CONFIG_DYNAMIC_DEBUG=y, and we want to
report a number that reflects what ram is saved by deconfiguring it.
Also fix wording and size under-reporting of the __dyndbg section.
Heres my overhead, on a virtme-run VM on a fedora-31 laptop:
dynamic_debug:dynamic_debug_init: 260 modules, 2479 entries \
and 10400 bytes in ddebug tables, 138824 bytes in __dyndbg section
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-7-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dyndbg populates its callsite info into __verbose section, change that
to a more specific and descriptive name, __dyndbg.
Also, per checkpatch:
simplify __attribute(..) to __section(__dyndbg) declaration.
and 1 spelling fix, decriptor
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-6-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The verbose/debug logging done for `cat $MNT/dynamic_debug/control` is
voluminous (2 per control file entry + 2 per PAGE). Moreover, it just
prints pointer and sequence, which is not useful to a dyndbg user.
So just drop them.
Also require verbose>=2 for several other debug printks that are a bit
too chatty for typical needs;
ddebug_change() prints changes, once per modified callsite. Since
queries like "+p" will enable ~2300 callsites in a typical laptop, a
user probably doesn't need to see them often. ddebug_exec_queries()
still summarizes with verbose=1.
ddebug_(add|remove)_module() also print 1 line per action on a module,
not needed by typical modprobe user.
This leaves verbose=1 better focussed on the >control parsing process.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-5-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bad78c550 ("lib/dynamic_debug.c: use seq_open_private() instead of seq_open()")'
The commit was one of a tree-wide set which replaced open-coded
boilerplate with a single tail-call. It therefore obsoleted the
comment about that boilerplate, clean that up now.
Acked-by: <jbaron@akamai.com>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20200719231058.1586423-4-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since debugfs include sensitive information it need to be treated
carefully. But it also has many very useful debug functions for userspace.
With this option we can have same configuration for system with
need of debugfs and a way to turn it off. This gives a extra protection
for exposure on systems where user-space services with system
access are attacked.
It is controlled by a configurable default value that can be override
with a kernel command line parameter. (debugfs=)
It can be on or off, but also internally on but not seen from user-space.
This no-mount mode do not register a debugfs as filesystem, but client can
register their parts in the internal structures. This data can be readed
with a debugger or saved with a crashkernel. When it is off clients
get EPERM error when accessing the functions for registering their
components.
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Link: https://lore.kernel.org/r/20200716071511.26864-3-peter.enderborg@sony.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-07-21
The following pull-request contains BPF updates for your *net-next* tree.
We've added 46 non-merge commits during the last 6 day(s) which contain
a total of 68 files changed, 4929 insertions(+), 526 deletions(-).
The main changes are:
1) Run BPF program on socket lookup, from Jakub.
2) Introduce cpumap, from Lorenzo.
3) s390 JIT fixes, from Ilya.
4) teach riscv JIT to emit compressed insns, from Luke.
5) use build time computed BTF ids in bpf iter, from Yonghong.
====================
Purely independent overlapping changes in both filter.h and xdp.h
Signed-off-by: David S. Miller <davem@davemloft.net>
Arvind Sankar
Herbert Xu
David Disseldorp
Linus Torvalds
Willy Tarreau
George Spelvin
Peilin Ye
Vitor Massaru Iha
Albert van der Linde
George Popescu
Tobias Jordan
Dan Carpenter
Miaohe Lin
Christophe JAILLET
Stephen Boyd
Randy Dunlap
Andy Shevchenko
Matthew Wilcox (Oracle)
Jason Gunthorpe
Douglas Gilbert
Patricia Alfonso
Ralph Campbell
Dan Williams
Marco Elver
Johannes Berg
Brendan Higgins
Alan Maguire
Ming Lei
Ingo Molnar
Jakub Kicinski
Dave Airlie
David S. Miller
Maor Gottlieb
Scott Branden
Christoph Hellwig
Thibaut Sautereau
Zqiang
Bartosz Golaszewski
Daniel Thompson
Jim Cromie
Jason Yan
Nick Desaulniers
David Laight
Tianjia Zhang
Masami Hiramatsu
Colin Ian King
Changbin Du
Maxime Ripard
Greg Kroah-Hartman
Kees Cook
Sven Schneider
Paul E. McKenney
Paul Cercueil
Jiri Kosina
Sedat Dilek
Boqun Feng
Gustavo A. R. Silva
Al Viro
Krzysztof Kozlowski
Nick Terrell
Eric Dumazet
Tiezhu Yang
Rikard Falkeborn
Kars Mulder
Alexander A. Klimov
Wei Yongjun
Geert Uytterhoeven
Stefano Brivio
Feng Tang
Masahiro Yamada
Andrey Konovalov
Walter Wu
Mike Rapoport
Waiman Long
Thomas Gleixner
Marcelo Henrique Cerri
Ahmed S. Darwish
Jacob Keller
peterz@infradead.org
Peter Enderborg