Граф коммитов

9 Коммитов

Автор SHA1 Сообщение Дата
Thierry Reding 7232398abc ARM: tegra: Convert PMC to a driver
This commit converts the PMC support code to a platform driver. Because
the boot process needs to call into this driver very early, also set up
a minimal environment via an early initcall.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:58:43 +02:00
Thierry Reding 24fa5af810 soc/tegra: fuse: Set up in early initcall
Rather than rely on explicit initialization order called from SoC setup
code, use a plain initcall and rely on initcall ordering to take care of
dependencies.

This driver exposes some functionality (querying the chip ID) needed at
very early stages of the boot process. An early initcall is good enough
provided that some of the dependencies are deferred to later stages. To
make sure any abuses are easily caught, output a warning message if the
chip ID is queried while it can't be read yet.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:58:42 +02:00
Thierry Reding a2686766c8 soc/tegra: Implement runtime check for Tegra SoCs
Subsequent patches will move some of the initialization code from SoC
setup code to regular initcalls. To prevent breakage on other SoCs in
multi-platform builds, these initcalls need to check that they indeed
run on Tegra.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:58:41 +02:00
Peter De Schrijver 0d827a4343 soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
The Tegra20 fuse driver is the only user of tegra_apb_readl_using_dma().
Therefore we can simply the code by incorporating the APB DMA handling into
the driver directly. tegra_apb_writel_using_dma() is dropped because there
are no users.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:37:12 +02:00
Peter De Schrijver 783c8f4c84 soc/tegra: Add efuse driver for Tegra
Implement fuse driver for Tegra20, Tegra30, Tegra114 and Tegra124. This
replaces functionality previously provided in arch/arm/mach-tegra, which
is removed in this patch.

While at it, move the only user of the global tegra_revision variable
over to tegra_sku_info.revision and export tegra_fuse_readl() to allow
drivers to read calibration fuses.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:36:01 +02:00
Peter De Schrijver 35874f3617 ARM: tegra: move fuse exports to soc/tegra/fuse.h
All fuse related functionality will move to a driver in the following
patches. To prepare for this, export all the required functionality in a
global header file and move all users of fuse.h to soc/tegra/fuse.h.

While we're at it, remove tegra_bct_strapping, as its only user was
removed in Commit a7cbe92cef ("ARM: tegra: remove tegra EMC scaling
driver").

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 14:32:51 +02:00
Peter De Schrijver 3f394f8064 ARM: tegra: export apb dma readl/writel
Export APB DMA readl and writel. These are needed because we can't
access the fuses directly on Tegra20 without potentially causing a
system hang. Also have the APB DMA readl and writel return an error in
case of a read failure instead of just returning zero or ignore write
failures.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 13:36:44 +02:00
Thierry Reding 304664eab9 ARM: tegra: Use a function to get the chip ID
Instead of using a simple variable access to get at the Tegra chip ID,
use a function so that we can run additional code. This can be used to
determine where the chip ID is being accessed without being available.
That in turn will be handy for resolving boot sequence dependencies in
order to convert more code to regular initcalls rather than a sequence
fixed by Tegra SoC setup code.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 13:36:41 +02:00
Thierry Reding 306a7f9139 ARM: tegra: Move includes to include/soc/tegra
In order to not clutter the include/linux directory with SoC specific
headers, move the Tegra-specific headers out into a separate directory.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-07-17 13:26:47 +02:00