The code in sca3000_store_measurement_mode() uses the variable val to
do bitwise operations with an int mask and or-s it into st->rx[0] which
is an entry in a u8 array (see sca3000.h).
This means up to now values larger than a u8 were silently ignored and
just the lower 8 bits counted into the value that was written into
st->rx[0]. This code will return -ERANGE if the value in buf was too
large to fit into a u8.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In lis3102dq_write_frequency() we used a long variable to store the
value parsed from the char* buffer buf, as there only was a
strict_strtol() function to parse values.
Now we have got kstrto* which allows us to convert to the right data
type in most cases.
In this particular function we want to write a frequency value, and it
doesn't make sense to allow negative values here (as Dan Carpenter
pointed out in a previous email).
This means we can now parse the value into an unsigned long and get an
error for invalid (e.g. negative) values.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In the adis16220_write_16bit() function we used a long value to store
parsed data from the char* buffer buf.
The called function to actually write the data,
adis16220_spi_write_reg_16(), takes a u16 value as a parameter, so up
to now a value larger than u16 was silently ignored as it was only
truncated when passing the parameter.
Now this function will only accept values fitting into a u16.
Additionally the parsing function was changed to overcome the now
obsolete strict_strtol() function.
Signed-off-by: Andreas Ruprecht <rupran@einserver.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch reorders the semaphore locking.
It makes better sense to first evaluate
fw_download_sema semaphore then
NVMRdmWrmLocl semaphore. The
fw_download_sema is suppose to be
acquired in the START ioctl. If this is
not true, then it does not make sense
to continue.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a cleanup patch. I've shuffled the code around to
move the error handling closer to the calls. I've removed
some indent levels. I've replaced break statements with
direct returns.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch evaluates/calls the down_trylock locking
function directly, instead of storing the results
in a variable and evaluating the variable. These
changes were made in:
IOCTL_BCM_BUFFER_DOWNLOAD_STOP and
IOCTL_BCM_BUFFER_DOWNLOAD_START.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Implement the LTTng probe callbacks. One notable file here is
lttng-events.h, which is the core implementation of the LTTng
TRACE_EVENT macros for generation of probes and tracepoint decription
from the TRACE_EVENT declarations.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add the "lttng" virtual file to debugfs and procfs. All operations are
performed through ioctls (LTTng ioctl range is already reserved
upstream) on this virtual file and on anonymous file descriptors
returned by these ioctls. Each file descriptor is associated with a
tracer "object" (session, channel, stream, event, context).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This calibration feature is fairly limited for now, but provides an
example of how this can be performed.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Events can be augmented with context information. This is dynamically
configurable from the command line.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
x86-32 and x86-64 system call instrumentation, along with the
lttng-syscalls-generate-headers.sh script that generates the headers
from the system call list. See README for details.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Modifications to the in-kernel TRACE_EVENT are needed to generate the
compact event descriptions and the probe code LTTng generates. These
changes could apply to upstream TRACE_EVENT, but requires changing the
in-kernel API.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Implement wrappers for compatibility with older kernel versions and
kernels with had the libringbuffer (old) patchset applied.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
1. No need to check if a list is empty before list_for_each_ looping as
this is already checked by loop stopping conditional.
The side effect is reduced indentation depth
from:
if (!list_empty)
list_for_each()
to:
list_for_each()
2. drop cb_ prefix from cl_pos, cl_next variables used in list_for_each
loops. The code is more compact and readable
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We can remove BUG_ON in mei_irq_thread_read_client_message()
as the testing for response buffer size overflow has already
graceful handling in place.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate unnecessary nesting levels by rearranging code and conditions.
The resulting code should be still identical.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate unnecessary nesting levels by rearranging code and conditions.
The resulting code should be still identical.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Eliminate unneeded function and struct field. The same information is
available in HwDeviceExtension->jChipType.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_GetLVDSOEMTableIndex() can be made static. Move the function, so that
forward declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_XG21SetPanelDelay() can be made static. Move the function, so that
forward declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_XG27BLSignalVDD() can be made static. Move the function, so that
forward declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_XG21BLSignalVDD() can be made static. Move the function, so that
forward declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_SetXG27FPBits() can be made static. Move the function, so that
forward declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_SetXG21FPBits() can be made static. Move the function, so that
forward declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_GetResInfo() can be made static. Move the function, so that forward
declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
XGI_LongWait() can be made static. Move the function, so that forward
declaration is not needed.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch converts pci_table entries to use the PCI_DEVICE macro,
if .subvendor and .subdevice are set to PCI_ANY_ID,
and thus improves readablity.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch converts pci_table entries to use the PCI_DEVICE macro,
if .subvendor and .subdevice are set to PCI_ANY_ID,
and thus improves readablity.
Since CH_Agere_Systems_Mini_PCI_V1 is defined as 0 in hermes_pci_versions
and neither the enum nor the value is used anywhere else, we can drop
the assignment of .driver_data as it is initialized as 0 by default.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch converts pci_table entries to use the PCI_DEVICE macro,
if .subvendor and .subdevice are set to PCI_ANY_ID,
and thus improves readablity.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add the sysfs ABI docs for all current instances of this
parameter.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Andreas Ruprecht
Kevin McKinney
Mathieu Desnoyers
Tomas Winkler
Aaro Koskinen
Peter Huewe
Jonathan Cameron