Now that the whole dcache_hash_bucket crap is gone, go all the way and
also remove the weird locking layering violations for locking the hash
buckets. Add hlist_bl_lock/unlock helpers to move the locking into the
list abstraction instead of requiring each caller to open code it.
After all allowing for the bit locks is the whole point of these helpers
over the plain hlist variant.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch fixes a deadlock in GFS2 where two processes are trying
to reclaim an unlinked dinode:
One holds the inode glock and calls gfs2_lookup_by_inum trying to look
up the inode, which it can't, due to I_FREEING. The other has set
I_FREEING from vfs and is at the beginning of gfs2_delete_inode
waiting for the glock, which is held by the first. The solution is to
add a new non_block parameter to the gfs2_iget function that causes it
to return -ENOENT if the inode is being freed.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This adds a couple of missing tests to avoid read-only nodes
from attempting to deallocate unlinked inodes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reported-by: Michel Andre de la Porte <madelaporte@ubi.com>
GFS2 was relying on the writepage code to write out the zeroed data for
fallocate. However, with FALLOC_FL_KEEP_SIZE set, this may be past i_size.
If it is, it will be ignored. To work around this, gfs2 now calls
write_dirty_buffer directly on the buffer_heads when FALLOC_FL_KEEP_SIZE
is set, and it's writing past i_size.
This version is just a cleanup of my last version
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
I did an audit of gfs2's transaction glock for bugzilla bug
658619 and ran across this:
In function gfs2_write_end, in the unlikely event that
gfs2_meta_inode_buffer returns an error, the code may forget
to unlock the transaction lock because the "failed" label
appears after the call to function gfs2_trans_end.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
And give it a kernel-doc comment.
[akpm@linux-foundation.org: btrfs changed in linux-next]
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Acked-by: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (25 commits)
video: change to new flag variable
scsi: change to new flag variable
rtc: change to new flag variable
rapidio: change to new flag variable
pps: change to new flag variable
net: change to new flag variable
misc: change to new flag variable
message: change to new flag variable
memstick: change to new flag variable
isdn: change to new flag variable
ieee802154: change to new flag variable
ide: change to new flag variable
hwmon: change to new flag variable
dma: change to new flag variable
char: change to new flag variable
fs: change to new flag variable
xtensa: change to new flag variable
um: change to new flag variables
s390: change to new flag variable
mips: change to new flag variable
...
Fix up trivial conflict in drivers/hwmon/Makefile
Replace EXTRA_CFLAGS with ccflags-y. And change ntfs-objs to ntfs-y
for cleaner conditional inclusion.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (33 commits)
AppArmor: kill unused macros in lsm.c
AppArmor: cleanup generated files correctly
KEYS: Add an iovec version of KEYCTL_INSTANTIATE
KEYS: Add a new keyctl op to reject a key with a specified error code
KEYS: Add a key type op to permit the key description to be vetted
KEYS: Add an RCU payload dereference macro
AppArmor: Cleanup make file to remove cruft and make it easier to read
SELinux: implement the new sb_remount LSM hook
LSM: Pass -o remount options to the LSM
SELinux: Compute SID for the newly created socket
SELinux: Socket retains creator role and MLS attribute
SELinux: Auto-generate security_is_socket_class
TOMOYO: Fix memory leak upon file open.
Revert "selinux: simplify ioctl checking"
selinux: drop unused packet flow permissions
selinux: Fix packet forwarding checks on postrouting
selinux: Fix wrong checks for selinux_policycap_netpeer
selinux: Fix check for xfrm selinux context algorithm
ima: remove unnecessary call to ima_must_measure
IMA: remove IMA imbalance checking
...
As per RCU glock patch review comments, don't use the _raw
version of this function here.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
gfs2_write_begin() calls grab_cache_page_write_begin() that returns *locked*
page. Correspondent error-handling path lacks for unlock_page() call:
> out:
> if (error == 0)
> return 0;
>
> page_cache_release(page);
The whole system hangs if gfs2_unstuff_dinode() called from gfs2_write_begin()
failed for some reason.
Reported-by: Maxim <maxim.patlasov@gmail.com>
Signed-off-by: Maxim <maxim.patlasov@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The exportfs encode handle function should return the minimum required
handle size. This helps user to find out the handle size by passing 0
handle size in the first step and then redoing to the call again with
the returned handle size value.
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The previous patch missed a couple of places where the AIL list
needed locking, so this fixes up those places, plus a comment
is corrected too.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Chinner <dchinner@redhat.com>
The log lock is currently used to protect the AIL lists and
the movements of buffers into and out of them. The lists
are self contained and no log specific items outside the
lists are accessed when starting or emptying the AIL lists.
Hence the operation of the AIL does not require the protection
of the log lock so split them out into a new AIL specific lock
to reduce the amount of traffic on the log lock. This will
also reduce the amount of serialisation that occurs when
the gfs2_logd pushes on the AIL to move it forward.
This reduces the impact of log pushing on sequential write
throughput.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
GFS2 fallocate wasn't properly checking if a blocks were already allocated.
In write_empty_blocks(), if a page didn't have buffer_heads attached, GFS2
was always treating it as if there were no blocks allocated for that page.
GFS2 now calls gfs2_block_map() to check if the blocks are allocated before
writing them out.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is a small patch that optimizes multiple glock dequeue
operations. It changes the unlock order to be more efficient
and makes it easier for lock debugging tools to unravel. It
also eliminates the need for the temp variable x, although
that would likely be optimized out.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Code has been converted over to the new explicit on-stack plugging,
and delay users have been converted to use the new API for that.
So lets kill off the old plugging along with aops->sync_page().
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
This patch ensures that we always wait for glock demotion when
dropping flocks on a file in order to prevent any race
conditions associated with further flock calls or closing
the file.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch fixes a race in deallocating glocks which was introduced
in the RCU glock patch. We need to ensure that the glock count is
kept correct even in the case that there is a race to add a new
glock into the hash table. Also, to avoid having to wait for an
RCU grace period, the glock counter can be decremented before
call_rcu() is called.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Immediately after being synced to disk, cached quotas are zeroed out and a
subsequent access of the cached quotas results in incorrect zero values. This
meant that gfs2 assumed the actual usage to be the zero (or near-zero) usage
values it found in the cached quotas and comparison against warn/limits never
triggered a quota violation.
This patch adds a new flag QDF_REFRESH that is set after a sync so that the
cached quotas are forcefully refreshed from disk on a subsequent access on
seeing this flag set.
Resolves: rhbz#675944
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch is a performance improvement to GFS2's dealloc code.
Rather than update the quota file and statfs file for every
single block that's stripped off in unlink function do_strip,
this patch keeps track and updates them once for every layer
that's stripped. This is done entirely inside the existing
transaction, so there should be no risk of corruption.
The other functions that deallocate blocks will be unaffected
because they are using wrapper functions that do the same
thing that they do today.
I tested this code on my roth cluster by creating 200
files in a directory, each of which is 100MB, then on
four nodes, I simultaneously deleted the files, thus competing
for GFS2 resources (but different files). The commands
I used were:
[root@roth-01]# time for i in `seq 1 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done
[root@roth-02]# time for i in `seq 2 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done
[root@roth-03]# time for i in `seq 3 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done
[root@roth-05]# time for i in `seq 4 4 200` ; do rm /mnt/gfs2/bigdir/gfs2.$i; done
The performance increase was significant:
roth-01 roth-02 roth-03 roth-05
--------- --------- --------- ---------
old: real 0m34.027 0m25.021s 0m23.906s 0m35.646s
new: real 0m22.379s 0m24.362s 0m24.133s 0m18.562s
Total time spent deleting:
old: 118.6s
new: 89.4
For this particular case, this showed a 25% performance increase for
GFS2 unlinks.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Michael Leun reported that running parallel opens on a fuse filesystem
can trigger a "kernel BUG at mm/truncate.c:475"
Gurudas Pai reported the same bug on NFS.
The reason is, unmap_mapping_range() is not prepared for more than
one concurrent invocation per inode. For example:
thread1: going through a big range, stops in the middle of a vma and
stores the restart address in vm_truncate_count.
thread2: comes in with a small (e.g. single page) unmap request on
the same vma, somewhere before restart_address, finds that the
vma was already unmapped up to the restart address and happily
returns without doing anything.
Another scenario would be two big unmap requests, both having to
restart the unmapping and each one setting vm_truncate_count to its
own value. This could go on forever without any of them being able to
finish.
Truncate and hole punching already serialize with i_mutex. Other
callers of unmap_mapping_range() do not, and it's difficult to get
i_mutex protection for all callers. In particular ->d_revalidate(),
which calls invalidate_inode_pages2_range() in fuse, may be called
with or without i_mutex.
This patch adds a new mutex to 'struct address_space' to prevent
running multiple concurrent unmap_mapping_range() on the same mapping.
[ We'll hopefully get rid of all this with the upcoming mm
preemptibility series by Peter Zijlstra, the "mm: Remove i_mmap_mutex
lockbreak" patch in particular. But that is for 2.6.39 ]
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Michael Leun <lkml20101129@newton.leun.net>
Reported-by: Gurudas Pai <gurudas.pai@oracle.com>
Tested-by: Gurudas Pai <gurudas.pai@oracle.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two spellings in use for 'freeze' + 'able' - 'freezable' and
'freezeable'. The former is the more prominent one. The latter is
mostly used by workqueue and in a few other odd places. Unify the
spelling to 'freezable'.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Handle block allocation for forceful unstuffing of quota dinode during quota
update using quotactl(). Also fix block reservation for special cases when
quotas cross over block boundaries and update 2 blocks instead of 1.
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The mmap system call grabs a glock when an update to atime maybe
required. It does this in order to ensure that the flags on the
inode are uptodate, but since it will only mark atime for a future
update, an exclusive lock is not required here (one will be taken
later when the actual update is performed).
Also, the lock can be skipped when the mount is marked noatime in
addition to the original check which only looked at the noatime
flag for the inode itself.
This should increase the scalability of the mmap call when multiple
nodes are all mmaping the same file.
Reported-by: Scooter Morris <scooter@cgl.ucsf.edu>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
SELinux would like to implement a new labeling behavior of newly created
inodes. We currently label new inodes based on the parent and the creating
process. This new behavior would also take into account the name of the
new object when deciding the new label. This is not the (supposed) full path,
just the last component of the path.
This is very useful because creating /etc/shadow is different than creating
/etc/passwd but the kernel hooks are unable to differentiate these
operations. We currently require that userspace realize it is doing some
difficult operation like that and than userspace jumps through SELinux hoops
to get things set up correctly. This patch does not implement new
behavior, that is obviously contained in a seperate SELinux patch, but it
does pass the needed name down to the correct LSM hook. If no such name
exists it is fine to pass NULL.
Signed-off-by: Eric Paris <eparis@redhat.com>
We can allow a few more cases to use RCU path walking than
originally allowed. It should be possible to also enable
RCU path walking when the glock is already cached. Thats
a bit more complicated though, so left for a future patch.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Nick Piggin <npiggin@gmail.com>
This has a number of advantages:
- Reduces contention on the hash table lock
- Makes the code smaller and simpler
- Should speed up glock dumps when under load
- Removes ref count changing in examine_bucket
- No longer need hash chain lock in glock_put() in common case
There are some further changes which this enables and which
we may do in the future. One is to look at using SLAB_RCU,
and another is to look at using a per-cpu counter for the
per-sb glock counter, since that is touched twice in the
lifetime of each glock (but only used at umount time).
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In the (impossible, except if there is fs corruption) error path
in gfs2_lookup_by_inum() if the call to gfs2_inode_refresh()
fails, it was leaving the function by calling iput() rather
than iget_failed(). This would cause future lookups of the same
inode to block forever.
This patch fixes the problem by moving the call to gfs2_inode_refresh()
into gfs2_inode_lookup() where iget_failed() is part of the error path
already. Also this cleans up some unreachable code and makes
gfs2_set_iop() static.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When a file gets deleted on GFS2, if a node can't get an exclusive lock on the
file's iopen glock, it punts on actually freeing up the space, because another
node is using the file. When it does this, it needs to drop the iopen glock
from its cache so that the other node can get an exclusive lock on it. Now,
gfs2_delete_inode() sets GL_NOCACHE before dropping the shared lock on the
iopen glock in preparation for grabbing it in the exclusive state. Since the
node needs the glock in the exclusive state, dropping the shared lock from the
cache doesn't slow down the case where no other nodes are using the file.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Currently all filesystems except XFS implement fallocate asynchronously,
while XFS forced a commit. Both of these are suboptimal - in case of O_SYNC
I/O we really want our allocation on disk, especially for the !KEEP_SIZE
case where we actually grow the file with user-visible zeroes. On the
other hand always commiting the transaction is a bad idea for fast-path
uses of fallocate like for example in recent Samba versions. Given
that block allocation is a data plane operation anyway change it from
an inode operation to a file operation so that we have the file structure
available that lets us check for O_SYNC.
This also includes moving the code around for a few of the filesystems,
and remove the already unnedded S_ISDIR checks given that we only wire
up fallocate for regular files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of various home grown checks that might need updates for new
flags just check for any bit outside the mask of the features supported
by the filesystem. This makes the check future proof for any newly
added flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'for-2.6.38/core' of git://git.kernel.dk/linux-2.6-block: (43 commits)
block: ensure that completion error gets properly traced
blktrace: add missing probe argument to block_bio_complete
block cfq: don't use atomic_t for cfq_group
block cfq: don't use atomic_t for cfq_queue
block: trace event block fix unassigned field
block: add internal hd part table references
block: fix accounting bug on cross partition merges
kref: add kref_test_and_get
bio-integrity: mark kintegrityd_wq highpri and CPU intensive
block: make kblockd_workqueue smarter
Revert "sd: implement sd_check_events()"
block: Clean up exit_io_context() source code.
Fix compile warnings due to missing removal of a 'ret' variable
fs/block: type signature of major_to_index(int) to major_to_index(unsigned)
block: convert !IS_ERR(p) && p to !IS_ERR_NOR_NULL(p)
cfq-iosched: don't check cfqg in choose_service_tree()
fs/splice: Pull buf->ops->confirm() from splice_from_pipe actors
cdrom: export cdrom_check_events()
sd: implement sd_check_events()
sr: implement sr_check_events()
...
Gfs2 doesn't have the ability to punch holes yet, so make sure we return
EOPNOTSUPP if we try to use hole punching through fallocate. This support can
be added later. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove kobject.h from files which don't need it, notably,
sched.h and fs.h.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Require filesystems be aware of .d_revalidate being called in rcu-walk
mode (nd->flags & LOOKUP_RCU). For now do a simple push down, returning
-ECHILD from all implementations.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Reduce some branches and memory accesses in dcache lookup by adding dentry
flags to indicate common d_ops are set, rather than having to check them.
This saves a pointer memory access (dentry->d_op) in common path lookup
situations, and saves another pointer load and branch in cases where we
have d_op but not the particular operation.
Patched with:
git grep -E '[.>]([[:space:]])*d_op([[:space:]])*=' | xargs sed -e 's/\([^\t ]*\)->d_op = \(.*\);/d_set_d_op(\1, \2);/' -e 's/\([^\t ]*\)\.d_op = \(.*\);/d_set_d_op(\&\1, \2);/' -i
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
RCU free the struct inode. This will allow:
- Subsequent store-free path walking patch. The inode must be consulted for
permissions when walking, so an RCU inode reference is a must.
- sb_inode_list_lock to be moved inside i_lock because sb list walkers who want
to take i_lock no longer need to take sb_inode_list_lock to walk the list in
the first place. This will simplify and optimize locking.
- Could remove some nested trylock loops in dcache code
- Could potentially simplify things a bit in VM land. Do not need to take the
page lock to follow page->mapping.
The downsides of this is the performance cost of using RCU. In a simple
creat/unlink microbenchmark, performance drops by about 10% due to inability to
reuse cache-hot slab objects. As iterations increase and RCU freeing starts
kicking over, this increases to about 20%.
In cases where inode lifetimes are longer (ie. many inodes may be allocated
during the average life span of a single inode), a lot of this cache reuse is
not applicable, so the regression caused by this patch is smaller.
The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU,
however this adds some complexity to list walking and store-free path walking,
so I prefer to implement this at a later date, if it is shown to be a win in
real situations. I haven't found a regression in any non-micro benchmark so I
doubt it will be a problem.
Signed-off-by: Nick Piggin <npiggin@kernel.dk>
Christoph Hellwig
Bob Peterson
Steven Whitehouse
Benjamin Marzinski
Lucas De Marchi
Linus Torvalds
Serge E. Hallyn
matt mooney
James Morris
Maxim
Aneesh Kumar K.V
Dave Chinner
Al Viro
Jens Axboe
Abhijith Das
Miklos Szeredi
Tejun Heo
Eric Paris
Christoph Hellwig
Josef Bacik
Alexey Dobriyan
Nick Piggin