Here is the "big" staging and IIO driver update for 4.15-rc1.
Lots and lots of little changes, almost all minor code cleanups as the
Outreachy application process happened during this development cycle.
Also happened was a lot of IIO driver activity, and the typec USB code
moving out of staging to drivers/usb (same commits are in the USB tree
on a persistent branch to not cause merge issues.)
Overall, it's a wash, I think we added a few hundred more lines than
removed, but really only a few thousand were modified at all.
All of these have been in linux-next for a while. There might be a
merge issue with Al's vfs tree in the pi433 driver (take his changes,
they are always better), and the media tree with some of the odd atomisp
cleanups (take the media tree's version).
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWgnFrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymxbwCgtNlBkqD2JJYpLRKvI/C4w1vzZsEAnA2THRkt
g3ioPBqmqC/2DSbldr2o
=/ebw
-----END PGP SIGNATURE-----
Merge tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here is the "big" staging and IIO driver update for 4.15-rc1.
Lots and lots of little changes, almost all minor code cleanups as the
Outreachy application process happened during this development cycle.
Also happened was a lot of IIO driver activity, and the typec USB code
moving out of staging to drivers/usb (same commits are in the USB tree
on a persistent branch to not cause merge issues.)
Overall, it's a wash, I think we added a few hundred more lines than
removed, but really only a few thousand were modified at all.
All of these have been in linux-next for a while. There might be a
merge issue with Al's vfs tree in the pi433 driver (take his changes,
they are always better), and the media tree with some of the odd
atomisp cleanups (take the media tree's version)"
* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
staging: lustre: add SPDX identifiers to all lustre files
staging: greybus: Remove redundant license text
staging: greybus: add SPDX identifiers to all greybus driver files
staging: ccree: simplify ioread/iowrite
staging: ccree: simplify registers access
staging: ccree: simplify error handling logic
staging: ccree: remove dead code
staging: ccree: handle limiting of DMA masks
staging: ccree: copy IV to DMAable memory
staging: fbtft: remove redundant initialization of buf
staging: sm750fb: Fix parameter mistake in poke32
staging: wilc1000: Fix bssid buffer offset in Txq
staging: fbtft: fb_ssd1331: fix mirrored display
staging: android: Fix checkpatch.pl error
staging: greybus: loopback: convert loopback to use generic async operations
staging: greybus: operation: add private data with get/set accessors
staging: greybus: loopback: Fix iteration count on async path
staging: greybus: loopback: Hold per-connection mutex across operations
staging: greybus/loopback: use ktime_get() for time intervals
staging: fsl-dpaa2/eth: Extra headroom in RX buffers
...
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
Commit 46949b4856 ("staging: wilc1000: New cfg packet
format in handle_set_wfi_drv_handler") updated the frame
format sent from host to the firmware. The code to update
the bssid offset in the new frame was part of a second
patch in the series which did not make it in and thus
causes connection problems after associating to an AP.
This fix adds the proper offset of the bssid value in the
Tx queue buffer to fix the connection issues.
Fixes: 46949b4856 ("staging: wilc1000: New cfg packet format in handle_set_wfi_drv_handler")
Cc: stable@vger.kernel.org
Signed-off-by: Aditya Shankar <Aditya.Shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shifting and masking strHostIfSetMulti->enabled is redundant since
enabled is a bool and so all the shifted and masked values will be
zero. Replace them with zero to simplify the code.
Detected by CoverityScan, CID#1339458 ("Bad shift operation") and
CID#1339506 ("Operands don't affect result").
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As part of removing the timer_list.data field, this converts the wilc1000
driver to using from_timer and an explicit per-timer data field, since
there doesn't appear to be a way to sanely resolve vif from hif_drv.
Cc: Aditya Shankar <aditya.shankar@microchip.com>
Cc: Ganesh Krishna <ganesh.krishna@microchip.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-wireless@vger.kernel.org
Cc: devel@driverdev.osuosl.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several timer users needlessly reset their .function/.data fields during
their timer callback, but nothing else changes them. Some users do not
use their .data field at all. Each instance is removed here.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> # for staging
Acked-by: Krzysztof Halasa <khc@pm.waw.pl> # for wan/hdlc*
Acked-by: Jens Axboe <axboe@kernel.dk> # for amiflop
Cc: devel@driverdev.osuosl.org
Cc: netdev@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: Jens Axboe <axboe@fb.com>
Cc: Ganesh Krishna <ganesh.krishna@microchip.com>
Cc: Aditya Shankar <aditya.shankar@microchip.com>
Link: https://lkml.kernel.org/r/20171010001032.GA119829@beast
Before closing the brace, the blank line is not needed. That blank
line has not meaning here. so remove it.
Signed-off-by: Keerthi Reddy <keerthigd4990@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A space after type casting is not needed. All the other typecasts
in this file don't put space after typecast. so remove space
after typecast at this line.
checked with checkpatch.pl script
Signed-off-by: Keerthi Reddy <keerthigd4990@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trivial fix to spelling mistake in netdev_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
txq_count receives a value from wilc_wlan_handle_txq()
and therefore should be u32
found using sparse:
drivers/staging/wilc1000/linux_wlan.c:306:58: warning:
incorrect type in argument 2 (different signedness)
Signed-off-by: Ilia Sergachev <ilia.sergachev@unibas.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing parameter name to fix the following checkpatch.pl warning:
WARNING: function definition argument 'struct device *' should also have
an identifier name
Signed-off-by: Dmitriy Cherkasov <dmitriy@oss-tech.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trivial fix to typos in netdev_err error messages. I should have spotted
this in a previous round of spelling mistake checks on this driver but
this one slipped through.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All uses of refresh_scan() have a constant 1 as the second argument.
Remove it and neaten the function declaration.
Miscellanea:
o Remove overly deep indentation by using continue;
o Remove unnecessary test of the address of a static array as it's
always non-zero
o Rename and use proper type for the first void * argument as it's
always the struct wilc_priv *
o Move variables into loop where used
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking updates from David Miller:
"Reasonably busy this cycle, but perhaps not as busy as in the 4.12
merge window:
1) Several optimizations for UDP processing under high load from
Paolo Abeni.
2) Support pacing internally in TCP when using the sch_fq packet
scheduler for this is not practical. From Eric Dumazet.
3) Support mutliple filter chains per qdisc, from Jiri Pirko.
4) Move to 1ms TCP timestamp clock, from Eric Dumazet.
5) Add batch dequeueing to vhost_net, from Jason Wang.
6) Flesh out more completely SCTP checksum offload support, from
Davide Caratti.
7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
Neira Ayuso, and Matthias Schiffer.
8) Add devlink support to nfp driver, from Simon Horman.
9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
Prabhu.
10) Add stack depth tracking to BPF verifier and use this information
in the various eBPF JITs. From Alexei Starovoitov.
11) Support XDP on qed device VFs, from Yuval Mintz.
12) Introduce BPF PROG ID for better introspection of installed BPF
programs. From Martin KaFai Lau.
13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.
14) For loads, allow narrower accesses in bpf verifier checking, from
Yonghong Song.
15) Support MIPS in the BPF selftests and samples infrastructure, the
MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
Daney.
16) Support kernel based TLS, from Dave Watson and others.
17) Remove completely DST garbage collection, from Wei Wang.
18) Allow installing TCP MD5 rules using prefixes, from Ivan
Delalande.
19) Add XDP support to Intel i40e driver, from Björn Töpel
20) Add support for TC flower offload in nfp driver, from Simon
Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
Kicinski, and Bert van Leeuwen.
21) IPSEC offloading support in mlx5, from Ilan Tayari.
22) Add HW PTP support to macb driver, from Rafal Ozieblo.
23) Networking refcount_t conversions, From Elena Reshetova.
24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
for tuning the TCP sockopt settings of a group of applications,
currently via CGROUPs"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
cxgb4: Support for get_ts_info ethtool method
cxgb4: Add PTP Hardware Clock (PHC) support
cxgb4: time stamping interface for PTP
nfp: default to chained metadata prepend format
nfp: remove legacy MAC address lookup
nfp: improve order of interfaces in breakout mode
net: macb: remove extraneous return when MACB_EXT_DESC is defined
bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
bpf: fix return in load_bpf_file
mpls: fix rtm policy in mpls_getroute
net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
...
Trivial fix to spelling mistake in netdev_err error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.
Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:
@@
expression SKB, LEN;
typedef u8;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
@@
- *(fn(SKB, LEN))
+ *(u8 *)fn(SKB, LEN)
@@
expression E, SKB, LEN;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
type T;
@@
- E = ((T *)(fn(SKB, LEN)))
+ E = fn(SKB, LEN)
@@
expression SKB, LEN;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
@@
- fn(SKB, LEN)[0]
+ *(u8 *)fn(SKB, LEN)
Note that the last part there converts from push(...)[0] to the
more idiomatic *(u8 *)push(...).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.
An spatch similar to the one for skb_put_zero() converts many
of the places using it:
@@
identifier p, p2;
expression len, skb, data;
type t, t2;
@@
(
-p = skb_put(skb, len);
+p = skb_put_data(skb, data, len);
|
-p = (t)skb_put(skb, len);
+p = skb_put_data(skb, data, len);
)
(
p2 = (t2)p;
-memcpy(p2, data, len);
|
-memcpy(p, data, len);
)
@@
type t, t2;
identifier p, p2;
expression skb, data;
@@
t *p;
...
(
-p = skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
|
-p = (t *)skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
)
(
p2 = (t2)p;
-memcpy(p2, data, sizeof(*p));
|
-memcpy(p, data, sizeof(*p));
)
@@
expression skb, len, data;
@@
-memcpy(skb_put(skb, len), data, len);
+skb_put_data(skb, data, len);
(again, manually post-processed to retain some comments)
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the config packet format used in handle_set_wfi_drv_handler()
to align the host driver with the new format used in the wilc firmware.
The change updates the format in which the host driver provides the
firmware with the drv_handler index and also uses two new
fields viz. "mode" and 'name" in the config packet along with this index
to directly provide details about the interface and its mode to the
firmware instead of having multiple if-else statements in the host driver
to decide which interface to configure.
This change requires users to move to the newer version of the wilc
firmware(14.02 or higher) available on the vendor tree on github or on the
linux-firmware project. The existing firmware files on the linux-firmware
project are very old and best not used.
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Reviewed-by: Arend Van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a missing blank line issue reported by checkpatch.pl
Signed-off-by: Marko Stankovic <dartnorris@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split struct definition across multiple line to fit in the 80 characters
limit
Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Splitting function calls across multiple lines to fit in the 80
characters limit
Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Splitting functions signature across several lines to fin in the
80 characters limit
Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing some '-' comments to fit in the 80 characters limit
Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing empty line at the end of the file
Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This addresses the following sparse warnings:
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2006:51: warning: incorrect type in assignment (different base types)
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2006:51: expected unsigned short [unsigned] [assigned] [usertype] ht_capa_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2006:51: got restricted __le16 const [usertype] cap_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2011:52: warning: incorrect type in assignment (different base types)
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2011:52: expected unsigned short [unsigned] [assigned] [usertype] ht_ext_params
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2011:52: got restricted __le16 const [usertype] extended_ht_cap_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2012:51: warning: incorrect type in assignment (different base types)
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2012:51: expected unsigned int [unsigned] [assigned] [usertype] ht_tx_bf_cap
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2012:51: got restricted __le32 const [usertype] tx_BF_cap_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2078:51: warning: incorrect type in assignment (different base types)
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2078:51: expected unsigned short [unsigned] [assigned] [usertype] ht_capa_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2078:51: got restricted __le16 const [usertype] cap_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2083:52: warning: incorrect type in assignment (different base types)
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2083:52: expected unsigned short [unsigned] [assigned] [usertype] ht_ext_params
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2083:52: got restricted __le16 const [usertype] extended_ht_cap_info
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2084:51: warning: incorrect type in assignment (different base types)
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2084:51: expected unsigned int [unsigned] [assigned] [usertype] ht_tx_bf_cap
drivers/staging/wilc1000/wilc_wfi_cfgoperations.c:2084:51: got restricted __le32 const [usertype] tx_BF_cap_info
This is not the first attempt to address this problem:
https://lkml.org/lkml/2017/3/7/808
First, the current code works because the final use of the
ht_capa values (in host_interface.c: WILC_HostIf_PackStaParam) packs them
into a buffer in little-endian format. Since this matches the byte-order of
struct ieee80211_ht_cap, all is seemingly well.
What the current code does not do, and what these warnings expose, is
clearly communicate what the fields in struct add_sta_param
represent -- values with a specific (little endian) byte order.
This will lead to problems if the values are ever actually used by the
host, and that host is not little endian.
The proposed change addresses this by embedding a
struct ieee80211_ht_cap into struct add_sta_param. When the values
are later packed out, the newly embedded struct is copied directly
into the outbound buffer. All 16 and 32 bit types are treated as
little endian and marked as such. Future use of the values by the
host would still require conversion, or sparse would flag them again.
The following items are required for this to be correct:
1. The data is not currently used by the host.
2. struct ieee80211_ht_cap is packed.
3. The packing of the fields matches the order in
struct ieee80211_ht_cap.
This is similar, I believe, to how the same data is handled in
marvell/mwifiex/11n.c.
Test-compiled/loaded against staging-next on x86_64
Test-compiled against staging-next for ARM.
Applied/built against staging-testing.
Testing consists of compilation for the above trees/targets, and a
sparse check, no functional testing.
Signed-off-by: Jason Litzinger <jlitzingerdev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is the big staging tree update for 4.12-rc1. And it's a big one,
adding about 350k new lines of crap^Wcode, mostly all in a big dump of
media drivers from Intel. But there's other new drivers in here as
well, yet-another-wifi driver, new IIO drivers, and a new crypto
accelerator. We also deleted a bunch of stuff, mostly in patch
cleanups, but also the Android ION code has shrunk a lot, and the
Android low memory killer driver was finally deleted, much to the
celebration of the -mm developers.
All of these have been in linux-next with a few build issues that will
show up when you merge to your tree, I'll follow up with fixes for those
after this gets merged.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWQzzlQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylNMgCcD+GoaF/Ml7YnULRl2GG/526II78AnitZ8qjd
rPqeowMIewYu9fgckLUc
=7rzO
-----END PGP SIGNATURE-----
Merge tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO updates from Greg KH:
"Here is the big staging tree update for 4.12-rc1.
It's a big one, adding about 350k new lines of crap^Wcode, mostly all
in a big dump of media drivers from Intel. But there's other new
drivers in here as well, yet-another-wifi driver, new IIO drivers, and
a new crypto accelerator.
We also deleted a bunch of stuff, mostly in patch cleanups, but also
the Android ION code has shrunk a lot, and the Android low memory
killer driver was finally deleted, much to the celebration of the -mm
developers.
All of these have been in linux-next with a few build issues that will
show up when you merge to your tree"
Merge conflicts in the new rtl8723bs driver (due to the wifi changes
this merge window) handled as per linux-next, courtesy of Stephen
Rothwell.
* tag 'staging-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1182 commits)
staging: fsl-mc/dpio: add cpu <--> LE conversion for dpaa2_fd
staging: ks7010: remove line continuations in quoted strings
staging: vt6656: use tabs instead of spaces
staging: android: ion: Fix unnecessary initialization of static variable
staging: media: atomisp: fix range checking on clk_num
staging: media: atomisp: fix misspelled word in comment
staging: media: atomisp: kmap() can't fail
staging: atomisp: remove #ifdef for runtime PM functions
staging: atomisp: satm include directory is gone
atomisp: remove some more unused files
atomisp: remove hmm_load/store/clear indirections
atomisp: kill off mmgr_free
atomisp: clean up the hmm init/cleanup indirections
atomisp: handle allocation calls before init in the hmm layer
staging: fsl-dpaa2/eth: Add maintainer for Ethernet driver
staging: fsl-dpaa2/eth: Add TODO file
staging: fsl-dpaa2/eth: Add trace points
staging: fsl-dpaa2/eth: Add driver specific stats
staging: fsl-dpaa2/eth: Add ethtool support
staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver
...
Function dev_alloc_skb() will return a NULL pointer if there is no
enough memory. However, in function WILC_WFI_mon_xmit(), its return
value is used without validation. This may result in a bad memory access
bug. This patch fixes the bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead passing both flags, which can be NULL, and vif_params,
which are never NULL, move the flags into the vif_params and
use BIT(0), which is invalid from userspace, to indicate that
the flags were changed.
While updating all drivers, fix a small bug in wil6210 where
it was setting the flags to 0 instead of leaving them unchanged.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The strncasecmp of buff against the literal string RSSI
is using variable length which is zero. This should be instead
using the variable size instead. Also remove the redundant
variable length.
Detected by PVS-Studio, warning: V575
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vif->idx value is always 0 for two interfaces.
wl->vif_num = 0;
loop {
...
vif->idx = wl->vif_num;
...
wl->vif_num = i;
....
i++;
...
}
At present, vif->idx is assigned the value of wl->vif_num
at the beginning of this block and device is initialized
based on this index value.
In the next iteration, wl->vif_num is still 0 as it is only updated
later but gets assigned to vif->idx in the beginning. This causes problems
later when we try to reference a particular interface and also while
configuring the firmware.
This patch moves the assignment to vif->idx from the beginning
of the block to after wl->vif_num is updated with latest value of i.
Fixes: commit 735bb39ca3 ("staging: wilc1000: simplify vif[i]->ndev accesses")
Cc: <stable@vger.kernel.org>
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The configuration packet format has changed in the newer wilc
firmware versions 14.2 and up. This update ensures that the
firmware is initialized correctly by the host and configured
in the required mode.
Signed-off-by: Aditya Shankar <aditya.shankar@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ftrace can be used to trace functions. Removing function tracing using dev_dbg/info
Signed-off-by: Pushkar Jambhlekar <pushkar.iit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dev_err: replacing hardcoded function name with '%s' and __func__
Signed-off-by: Pushkar Jambhlekar <pushkar.iit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GAS_INTIAL_REQ should be GAS_INITIAL_REQ.
GAS_INTIAL_RSP should be GAS_INITIAL_RSP.
Improves readability of code.
Signed-off-by: Dylan Leggio <dleggio1@binghamton.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pmkid data is meant be be copied to the previous item in the
pmkidlist, however the code is just copying the data to itself because
the src index into pmkidlist is the same as the dst index into pmkidlist.
Fix this with i + 1 instead of i.
Detected by CoverityScan,CID#13339465 ("Overlapping buffer in memory copy")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct misspelled variables: 'happended' to 'happened' to make the
code grammatically correct.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move declaration of variables to top of function to make the code more
readable.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable ip_addr is already declared as pointer to u8. Again explicit type
casting of ip_addr to u8, is not required. Hence this patch removes it
by using the following coccinelle script.
@@
type T;
T *ptr,p;
@@
(
- (T *)(&p)
+ &p
|
- (T *)ptr
+ ptr
|
- (T *)(ptr)
+ ptr
|
- (T)(p)
+ p
)
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing 6 continue statements from a while loop. The
continue statements are redundant here since control
already returns to the beginning of the loop upon exit
of any of the conditional blocks. Found using Coccinelle.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch warning by renaming pu8Buffer to buffer
and u32Length to length in wilc_gnrl_info_received.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch warning by renaming pu8Buffer to buffer
and u32Length to length in wilc_network_info_received.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes checkpatch warning by renaming pu8Buffer to buffer
and u32Length to length in wilc_scan_complete_received.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kees Cook
Linus Torvalds
Aditya Shankar
Greg Kroah-Hartman
Colin Ian King
Keerthi Reddy
Ilia Sergachev
Dmitriy Cherkasov
Joe Perches
Johannes Berg
Marko Stankovic
Vincent Siles
Jason Litzinger
Pan Bian
Pushkar Jambhlekar
Dylan Leggio
Tamara Diaconita
Varsha Rao
Tahia Khan
Georgios Emmanouil