Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To facilitate additional options to get_user_pages_fast() change the
singular write parameter to be gup_flags.
This patch does not change any functionality. New functionality will
follow in subsequent patches.
Some of the get_user_pages_fast() call sites were unchanged because they
already passed FOLL_WRITE or 0 for the write parameter.
NOTE: It was suggested to change the ordering of the get_user_pages_fast()
arguments to ensure that callers were converted. This breaks the current
GUP call site convention of having the returned pages be the final
parameter. So the suggestion was rejected.
Link: http://lkml.kernel.org/r/20190328084422.29911-4-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190317183438.2057-4-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marshall <hubcap@omnibond.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rich Felker <dalias@libc.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pach series "Add FOLL_LONGTERM to GUP fast and use it".
HFI1, qib, and mthca, use get_user_pages_fast() due to its performance
advantages. These pages can be held for a significant time. But
get_user_pages_fast() does not protect against mapping FS DAX pages.
Introduce FOLL_LONGTERM and use this flag in get_user_pages_fast() which
retains the performance while also adding the FS DAX checks. XDP has also
shown interest in using this functionality.[1]
In addition we change get_user_pages() to use the new FOLL_LONGTERM flag
and remove the specialized get_user_pages_longterm call.
[1] https://lkml.org/lkml/2019/3/19/939
"longterm" is a relative thing and at this point is probably a misnomer.
This is really flagging a pin which is going to be given to hardware and
can't move. I've thought of a couple of alternative names but I think we
have to settle on if we are going to use FL_LAYOUT or something else to
solve the "longterm" problem. Then I think we can change the flag to a
better name.
Secondly, it depends on how often you are registering memory. I have
spoken with some RDMA users who consider MR in the performance path...
For the overall application performance. I don't have the numbers as the
tests for HFI1 were done a long time ago. But there was a significant
advantage. Some of which is probably due to the fact that you don't have
to hold mmap_sem.
Finally, architecturally I think it would be good for everyone to use
*_fast. There are patches submitted to the RDMA list which would allow
the use of *_fast (they reworking the use of mmap_sem) and as soon as they
are accepted I'll submit a patch to convert the RDMA core as well. Also
to this point others are looking to use *_fast.
As an aside, Jasons pointed out in my previous submission that *_fast and
*_unlocked look very much the same. I agree and I think further cleanup
will be coming. But I'm focused on getting the final solution for DAX at
the moment.
This patch (of 7):
This patch starts a series which aims to support FOLL_LONGTERM in
get_user_pages_fast(). Some callers who would like to do a longterm (user
controlled pin) of pages with the fast variant of GUP for performance
purposes.
Rather than have a separate get_user_pages_longterm() call, introduce
FOLL_LONGTERM and change the longterm callers to use it.
This patch does not change any functionality. In the short term
"longterm" or user controlled pins are unsafe for Filesystems and FS DAX
in particular has been blocked. However, callers of get_user_pages_fast()
were not "protected".
FOLL_LONGTERM can _only_ be supported with get_user_pages[_fast]() as it
requires vmas to determine if DAX is in use.
NOTE: In merging with the CMA changes we opt to change the
get_user_pages() call in check_and_migrate_cma_pages() to a call of
__get_user_pages_locked() on the newly migrated pages. This makes the
code read better in that we are calling __get_user_pages_locked() on the
pages before and after a potential migration.
As a side affect some of the interfaces are cleaned up but this is not the
primary purpose of the series.
In review[1] it was asked:
<quote>
> This I don't get - if you do lock down long term mappings performance
> of the actual get_user_pages call shouldn't matter to start with.
>
> What do I miss?
A couple of points.
First "longterm" is a relative thing and at this point is probably a
misnomer. This is really flagging a pin which is going to be given to
hardware and can't move. I've thought of a couple of alternative names
but I think we have to settle on if we are going to use FL_LAYOUT or
something else to solve the "longterm" problem. Then I think we can
change the flag to a better name.
Second, It depends on how often you are registering memory. I have spoken
with some RDMA users who consider MR in the performance path... For the
overall application performance. I don't have the numbers as the tests
for HFI1 were done a long time ago. But there was a significant
advantage. Some of which is probably due to the fact that you don't have
to hold mmap_sem.
Finally, architecturally I think it would be good for everyone to use
*_fast. There are patches submitted to the RDMA list which would allow
the use of *_fast (they reworking the use of mmap_sem) and as soon as they
are accepted I'll submit a patch to convert the RDMA core as well. Also
to this point others are looking to use *_fast.
As an asside, Jasons pointed out in my previous submission that *_fast and
*_unlocked look very much the same. I agree and I think further cleanup
will be coming. But I'm focused on getting the final solution for DAX at
the moment.
</quote>
[1] https://lore.kernel.org/lkml/20190220180255.GA12020@iweiny-DESK2.sc.intel.com/T/#md6abad2569f3bf6c1f03686c8097ab6563e94965
[ira.weiny@intel.com: v3]
Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190328084422.29911-2-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20190317183438.2057-2-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Including:
- ATS support for ARM-SMMU-v3.
- AUX domain support in the IOMMU-API and the Intel VT-d driver.
This adds support for multiple DMA address spaces per
(PCI-)device. The use-case is to multiplex devices between
host and KVM guests in a more flexible way than supported by
SR-IOV.
- The Rest are smaller cleanups and fixes, two of which needed
to be reverted after testing in linux-next.
-----BEGIN PGP SIGNATURE-----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=HLtu
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- ATS support for ARM-SMMU-v3.
- AUX domain support in the IOMMU-API and the Intel VT-d driver. This
adds support for multiple DMA address spaces per (PCI-)device. The
use-case is to multiplex devices between host and KVM guests in a
more flexible way than supported by SR-IOV.
- the rest are smaller cleanups and fixes, two of which needed to be
reverted after testing in linux-next.
* tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (45 commits)
Revert "iommu/amd: Flush not present cache in iommu_map_page"
Revert "iommu/amd: Remove the leftover of bypass support"
iommu/vt-d: Fix leak in intel_pasid_alloc_table on error path
iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU
iommu/vt-d: Set intel_iommu_gfx_mapped correctly
iommu/amd: Flush not present cache in iommu_map_page
iommu/vt-d: Cleanup: no spaces at the start of a line
iommu/vt-d: Don't request page request irq under dmar_global_lock
iommu/vt-d: Use struct_size() helper
iommu/mediatek: Fix leaked of_node references
iommu/amd: Remove amd_iommu_pd_list
iommu/arm-smmu: Log CBFRSYNRA register on context fault
iommu/arm-smmu-v3: Don't disable SMMU in kdump kernel
iommu/arm-smmu-v3: Disable tagged pointers
iommu/arm-smmu-v3: Add support for PCI ATS
iommu/arm-smmu-v3: Link domains and devices
iommu/arm-smmu-v3: Add a master->domain pointer
iommu/arm-smmu-v3: Store SteamIDs in master
iommu/arm-smmu-v3: Rename arm_smmu_master_data to arm_smmu_master
ACPI/IORT: Check ATS capability in root complex nodes
...
- Improve dev_printk() usage (Bjorn Helgaas)
- Fix issue with blocking in !TASK_RUNNING state while waiting for
userspace to release devices (Farhan Ali)
- Fix error path cleanup in nvlink setup (Greg Kurz)
- mdev-core cleanups and fixes in preparation for more use cases
(Parav Pandit)
- Cornelia has volunteered as an official vfio reviewer (Cornelia Huck)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=JSGI
-----END PGP SIGNATURE-----
Merge tag 'vfio-v5.2-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Improve dev_printk() usage (Bjorn Helgaas)
- Fix issue with blocking in !TASK_RUNNING state while waiting for
userspace to release devices (Farhan Ali)
- Fix error path cleanup in nvlink setup (Greg Kurz)
- mdev-core cleanups and fixes in preparation for more use cases (Parav
Pandit)
- Cornelia has volunteered as an official vfio reviewer (Cornelia Huck)
* tag 'vfio-v5.2-rc1' of git://github.com/awilliam/linux-vfio:
vfio: Add Cornelia Huck as reviewer
vfio/mdev: Avoid inline get and put parent helpers
vfio/mdev: Fix aborting mdev child device removal if one fails
vfio/mdev: Follow correct remove sequence
vfio/mdev: Avoid masking error code to EBUSY
vfio/mdev: Drop redundant extern for exported symbols
vfio/mdev: Removed unused kref
vfio/mdev: Avoid release parent reference during error path
vfio-pci/nvlink2: Fix potential VMA leak
vfio: Fix WARNING "do not call blocking ops when !TASK_RUNNING"
vfio: Use dev_printk() when possible
As section 15 of Documentation/process/coding-style.rst clearly
describes that compiler will be able to optimize code.
Hence drop inline for get and put helpers for parent.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
device_for_each_child() stops executing callback function for remaining
child devices, if callback hits an error.
Each child mdev device is independent of each other.
While unregistering parent device, mdev core must remove all child mdev
devices.
Therefore, mdev_device_remove_cb() always returns success so that
device_for_each_child doesn't abort if one child removal hits error.
While at it, improve remove and unregister functions for below simplicity.
There isn't need to pass forced flag pointer during mdev parent
removal which invokes mdev_device_remove(). So simplify the flow.
mdev_device_remove() is called from two paths.
1. mdev_unregister_driver()
mdev_device_remove_cb()
mdev_device_remove()
2. remove_store()
mdev_device_remove()
Fixes: 7b96953bc6 ("vfio: Mediated device Core driver")
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
mdev_remove_sysfs_files() should follow exact mirror sequence of a
create, similar to what is followed in error unwinding path of
mdev_create_sysfs_files().
Fixes: 6a62c1dfb5 ("vfio/mdev: Re-order sysfs attribute creation")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Instead of masking return error to -EBUSY, return actual error
returned by the driver.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
During mdev parent registration in mdev_register_device(),
if parent device is duplicate, it releases the reference of existing
parent device.
This is incorrect. Existing parent device should not be touched.
Fixes: 7b96953bc6 ("vfio: Mediated device Core driver")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
vfio_dev_present() which is the condition to
wait_event_interruptible_timeout(), will call vfio_group_get_device
and try to acquire the mutex group->device_lock.
wait_event_interruptible_timeout() will set the state of the current
task to TASK_INTERRUPTIBLE, before doing the condition check. This
means that we will try to acquire the mutex while already in a
sleeping state. The scheduler warns us by giving the following
warning:
[ 4050.264464] ------------[ cut here ]------------
[ 4050.264508] do not call blocking ops when !TASK_RUNNING; state=1 set at [<00000000b33c00e2>] prepare_to_wait_event+0x14a/0x188
[ 4050.264529] WARNING: CPU: 12 PID: 35924 at kernel/sched/core.c:6112 __might_sleep+0x76/0x90
....
4050.264756] Call Trace:
[ 4050.264765] ([<000000000017bbaa>] __might_sleep+0x72/0x90)
[ 4050.264774] [<0000000000b97edc>] __mutex_lock+0x44/0x8c0
[ 4050.264782] [<0000000000b9878a>] mutex_lock_nested+0x32/0x40
[ 4050.264793] [<000003ff800d7abe>] vfio_group_get_device+0x36/0xa8 [vfio]
[ 4050.264803] [<000003ff800d87c0>] vfio_del_group_dev+0x238/0x378 [vfio]
[ 4050.264813] [<000003ff8015f67c>] mdev_remove+0x3c/0x68 [mdev]
[ 4050.264825] [<00000000008e01b0>] device_release_driver_internal+0x168/0x268
[ 4050.264834] [<00000000008de692>] bus_remove_device+0x162/0x190
[ 4050.264843] [<00000000008daf42>] device_del+0x1e2/0x368
[ 4050.264851] [<00000000008db12c>] device_unregister+0x64/0x88
[ 4050.264862] [<000003ff8015ed84>] mdev_device_remove+0xec/0x130 [mdev]
[ 4050.264872] [<000003ff8015f074>] remove_store+0x6c/0xa8 [mdev]
[ 4050.264881] [<000000000046f494>] kernfs_fop_write+0x14c/0x1f8
[ 4050.264890] [<00000000003c1530>] __vfs_write+0x38/0x1a8
[ 4050.264899] [<00000000003c187c>] vfs_write+0xb4/0x198
[ 4050.264908] [<00000000003c1af2>] ksys_write+0x5a/0xb0
[ 4050.264916] [<0000000000b9e270>] system_call+0xdc/0x2d8
[ 4050.264925] 4 locks held by sh/35924:
[ 4050.264933] #0: 000000001ef90325 (sb_writers#4){.+.+}, at: vfs_write+0x9e/0x198
[ 4050.264948] #1: 000000005c1ab0b3 (&of->mutex){+.+.}, at: kernfs_fop_write+0x1cc/0x1f8
[ 4050.264963] #2: 0000000034831ab8 (kn->count#297){++++}, at: kernfs_remove_self+0x12e/0x150
[ 4050.264979] #3: 00000000e152484f (&dev->mutex){....}, at: device_release_driver_internal+0x5c/0x268
[ 4050.264993] Last Breaking-Event-Address:
[ 4050.265002] [<000000000017bbaa>] __might_sleep+0x72/0x90
[ 4050.265010] irq event stamp: 7039
[ 4050.265020] hardirqs last enabled at (7047): [<00000000001cee7a>] console_unlock+0x6d2/0x740
[ 4050.265029] hardirqs last disabled at (7054): [<00000000001ce87e>] console_unlock+0xd6/0x740
[ 4050.265040] softirqs last enabled at (6416): [<0000000000b8fe26>] __udelay+0xb6/0x100
[ 4050.265049] softirqs last disabled at (6415): [<0000000000b8fe06>] __udelay+0x96/0x100
[ 4050.265057] ---[ end trace d04a07d39d99a9f9 ]---
Let's fix this as described in the article
https://lwn.net/Articles/628628/.
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
[remove now redundant vfio_dev_present()]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Use dev_printk() when possible to make messages consistent with other
device-related messages.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Make the anon_inodes facility unconditional so that it can be used by core
VFS code and pidfd code.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[christian@brauner.io: adapt commit message to mention pidfds]
Signed-off-by: Christian Brauner <christian@brauner.io>
This adds the support to determine the isolation type
of a mediated device group by checking whether it has
an iommu device. If an iommu device exists, an iommu
domain will be allocated and then attached to the iommu
device. Otherwise, keep the same behavior as it is.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This adds helpers to attach or detach a domain to a
group. This will replace iommu_attach_group() which
only works for non-mdev devices.
If a domain is attaching to a group which includes the
mediated devices, it should attach to the iommu device
(a pci device which represents the mdev in iommu scope)
instead. The added helper supports attaching domain to
groups for both pci and mdev devices.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
A parent device might create different types of mediated
devices. For example, a mediated device could be created
by the parent device with full isolation and protection
provided by the IOMMU. One usage case could be found on
Intel platforms where a mediated device is an assignable
subset of a PCI, the DMA requests on behalf of it are all
tagged with a PASID. Since IOMMU supports PASID-granular
translations (scalable mode in VT-d 3.0), this mediated
device could be individually protected and isolated by an
IOMMU.
This patch adds a new member in the struct mdev_device to
indicate that the mediated device represented by mdev could
be isolated and protected by attaching a domain to a device
represented by mdev->iommu_device. It also adds a helper to
add or set the iommu device.
* mdev_device->iommu_device
- This, if set, indicates that the mediated device could
be fully isolated and protected by IOMMU via attaching
an iommu domain to this device. If empty, it indicates
using vendor defined isolation, hence bypass IOMMU.
* mdev_set/get_iommu_device(dev, iommu_device)
- Set or get the iommu device which represents this mdev
in IOMMU's device scope. Drivers don't need to set the
iommu device if it uses vendor defined isolation.
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Liu Yi L <yi.l.liu@intel.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Memory backed DMA mappings are accounted against a user's locked
memory limit, including multiple mappings of the same memory. This
accounting bounds the number of such mappings that a user can create.
However, DMA mappings that are not backed by memory, such as DMA
mappings of device MMIO via mmaps, do not make use of page pinning
and therefore do not count against the user's locked memory limit.
These mappings still consume memory, but the memory is not well
associated to the process for the purpose of oom killing a task.
To add bounding on this use case, we introduce a limit to the total
number of concurrent DMA mappings that a user is allowed to create.
This limit is exposed as a tunable module option where the default
value of 64K is expected to be well in excess of any reasonable use
case (a large virtual machine configuration would typically only make
use of tens of concurrent mappings).
This fixes CVE-2019-3882.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fixes the following sparse warning:
drivers/vfio/vfio_iommu_spapr_tce.c:1401:36: warning:
symbol 'tce_iommu_driver_ops' was not declared. Should it be static?
Fixes: 5ffd229c02 ("powerpc/vfio: Implement IOMMU driver for VFIO")
Signed-off-by: Wang Hai <wanghai26@huawei.com>
Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When compiling with -Wformat, clang emits the following warnings:
drivers/vfio/pci/vfio_pci.c:1601:5: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1601:13: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1601:21: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1601:32: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1605:5: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1605:13: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~
drivers/vfio/pci/vfio_pci.c:1605:21: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
drivers/vfio/pci/vfio_pci.c:1605:32: warning: format specifies type
'unsigned short' but the argument has type 'unsigned int' [-Wformat]
vendor, device, subvendor, subdevice,
^~~~~~~~~
The types of these arguments are unconditionally defined, so this patch
updates the format character to the correct ones for unsigned ints.
Link: https://github.com/ClangBuiltLinux/linux/issues/378
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Notable changes:
- Enable THREAD_INFO_IN_TASK to move thread_info off the stack.
- A big series from Christoph reworking our DMA code to use more of the generic
infrastructure, as he said:
"This series switches the powerpc port to use the generic swiotlb and
noncoherent dma ops, and to use more generic code for the coherent direct
mapping, as well as removing a lot of dead code."
- Increase our vmalloc space to 512T with the Hash MMU on modern CPUs, allowing
us to support machines with larger amounts of total RAM or distance between
nodes.
- Two series from Christophe, one to optimise TLB miss handlers on 6xx, and
another to optimise the way STRICT_KERNEL_RWX is implemented on some 32-bit
CPUs.
- Support for KCOV coverage instrumentation which means we can run syzkaller
and discover even more bugs in our code.
And as always many clean-ups, reworks and minor fixes etc.
Thanks to:
Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea Arcangeli, Andrew
Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir Singh, Brajeswar Ghosh,
Breno Leitao, Christian Lamparter, Christian Zigotzky, Christophe Leroy,
Christoph Hellwig, Corentin Labbe, Daniel Axtens, David Gibson, Diana Craciun,
Firoz Khan, Gustavo A. R. Silva, Igor Stoppa, Joe Lawrence, Joel Stanley,
Jonathan Neuschäfer, Jordan Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh
Salgaonkar, Mark Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce,
Meelis Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot, Nicholas
Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran, Paul Mackerras,
Peter Xu, PrasannaKumar Muralidharan, Qian Cai, Rashmica Gupta, Reza Arbab,
Robert P. J. Day, Russell Currey, Sabyasachi Gupta, Sam Bobroff, Sandipan Das,
Sergey Senozhatsky, Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav
Jain, YueHaibing.
-----BEGIN PGP SIGNATURE-----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=Z9bb
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- Enable THREAD_INFO_IN_TASK to move thread_info off the stack.
- A big series from Christoph reworking our DMA code to use more of
the generic infrastructure, as he said:
"This series switches the powerpc port to use the generic swiotlb
and noncoherent dma ops, and to use more generic code for the
coherent direct mapping, as well as removing a lot of dead
code."
- Increase our vmalloc space to 512T with the Hash MMU on modern
CPUs, allowing us to support machines with larger amounts of total
RAM or distance between nodes.
- Two series from Christophe, one to optimise TLB miss handlers on
6xx, and another to optimise the way STRICT_KERNEL_RWX is
implemented on some 32-bit CPUs.
- Support for KCOV coverage instrumentation which means we can run
syzkaller and discover even more bugs in our code.
And as always many clean-ups, reworks and minor fixes etc.
Thanks to: Alan Modra, Alexey Kardashevskiy, Alistair Popple, Andrea
Arcangeli, Andrew Donnellan, Aneesh Kumar K.V, Aravinda Prasad, Balbir
Singh, Brajeswar Ghosh, Breno Leitao, Christian Lamparter, Christian
Zigotzky, Christophe Leroy, Christoph Hellwig, Corentin Labbe, Daniel
Axtens, David Gibson, Diana Craciun, Firoz Khan, Gustavo A. R. Silva,
Igor Stoppa, Joe Lawrence, Joel Stanley, Jonathan Neuschäfer, Jordan
Niethe, Laurent Dufour, Madhavan Srinivasan, Mahesh Salgaonkar, Mark
Cave-Ayland, Masahiro Yamada, Mathieu Malaterre, Matteo Croce, Meelis
Roos, Michael W. Bringmann, Nathan Chancellor, Nathan Fontenot,
Nicholas Piggin, Nick Desaulniers, Nicolai Stange, Oliver O'Halloran,
Paul Mackerras, Peter Xu, PrasannaKumar Muralidharan, Qian Cai,
Rashmica Gupta, Reza Arbab, Robert P. J. Day, Russell Currey,
Sabyasachi Gupta, Sam Bobroff, Sandipan Das, Sergey Senozhatsky,
Souptick Joarder, Stewart Smith, Tyrel Datwyler, Vaibhav Jain,
YueHaibing"
* tag 'powerpc-5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/32: Clear on-stack exception marker upon exception return
powerpc: Remove export of save_stack_trace_tsk_reliable()
powerpc/mm: fix "section_base" set but not used
powerpc/mm: Fix "sz" set but not used warning
powerpc/mm: Check secondary hash page table
powerpc: remove nargs from __SYSCALL
powerpc/64s: Fix unrelocated interrupt trampoline address test
powerpc/powernv/ioda: Fix locked_vm counting for memory used by IOMMU tables
powerpc/fsl: Fix the flush of branch predictor.
powerpc/powernv: Make opal log only readable by root
powerpc/xmon: Fix opcode being uninitialized in print_insn_powerpc
powerpc/powernv: move OPAL call wrapper tracing and interrupt handling to C
powerpc/64s: Fix data interrupts vs d-side MCE reentrancy
powerpc/64s: Prepare to handle data interrupts vs d-side MCE reentrancy
powerpc/64s: system reset interrupt preserve HSRRs
powerpc/64s: Fix HV NMI vs HV interrupt recoverability test
powerpc/mm/hash: Handle mmap_min_addr correctly in get_unmapped_area topdown search
powerpc/hugetlb: Handle mmap_min_addr correctly in get_unmapped_area callback
selftests/powerpc: Remove duplicate header
powerpc sstep: Add support for modsd, modud instructions
...
pci_map_rom/pci_get_rom_size() performs memory access in the ROM.
In case the Memory Space accesses were disabled, readw() is likely
to trigger a synchronous external abort on some platforms.
In case memory accesses were disabled, re-enable them before the
call and disable them back again just after.
Fixes: 89e1f7d4c6 ("vfio: Add PCI device driver")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
PCI core handles save and restore of device state around reset, but
when using pci_set_power_state() we can unintentionally trigger a soft
reset of the device, where PCI core only restores the BAR state. If
we're using vfio-pci's idle D3 support to try to put devices into low
power when unused, this might trigger a reset when the device is woken
for use. Also power state management by the user, or within a guest,
can put the device into D3 power state with potentially limited
ability to restore the device if it should undergo a reset. The PCI
spec does not define the extent of a soft reset and many devices
reporting soft reset on D3->D0 transition do not undergo a PCI config
space reset. It's therefore assumed safe to unconditionally restore
the remainder of the state if the device indicates soft reset
support, even on a user initiated wakeup.
Implement a wrapper in vfio-pci to tag devices reporting PM reset
support, save their state on transitions into D3 and restore on
transitions back to D0.
Reported-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VFIO TCE IOMMU v2 owns IOMMU tables. When we detach an IOMMU group from
a container, we need to unset these tables from the group which we do by
calling unset_window(). We also unset tables when removing a DMA window
via the VFIO_IOMMU_SPAPR_TCE_REMOVE ioctl.
The window removal checks if the table actually exists (hidden inside
tce_iommu_find_table()) but the group detaching does not so the user
may see duplicating messages:
pci 0009:03 : [PE# fd] Removing DMA window #0
pci 0009:03 : [PE# fd] Removing DMA window #1
pci 0009:03 : [PE# fd] Removing DMA window #0
pci 0009:03 : [PE# fd] Removing DMA window #1
At the moment this is not a problem as the second invocation
of unset_window() writes zeroes to the HW registers again and exits early
as there is no table.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Actually, total amount of available minor number
for a single major is MINORMARK + 1. So expand
minor range when registering chrdev region.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
For the include directive with double-quotes "", the preprocessor
searches the header in the relative path to the current file.
Fix them up, and remove the header search path option.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There are new types and helpers that are supposed to be used in new code.
As a preparation to get rid of legacy types and API functions do
the conversion here.
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Currently, the EEH recovery process considers passed-through devices
as if they were not EEH-aware, which can cause them to be removed as
part of recovery. Because device removal requires cooperation from
the guest, this may lead to the process stalling or deadlocking.
Also, if devices are removed on the host side, they will be removed
from their IOMMU group, making recovery in the guest impossible.
Therefore, alter the recovery process so that passed-through devices
are not removed but are instead left frozen (and marked isolated)
until the guest performs it's own recovery. If firmware thaws a
passed-through PE because it's parent PE has been thawed (because it
was not passed through), re-freeze it.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Using the {0} construct as a generic initializer is perfectly fine in C,
however due to a bug in old gcc there is a warning:
+ /kisskb/src/drivers/vfio/pci/vfio_pci_nvlink2.c: warning: (near
initialization for 'cap.header') [-Wmissing-braces]: => 181:9
Since for whatever reason we still want to compile the modern kernel
with such an old gcc without warnings, this changes the capabilities
initialization.
The gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119
Fixes: 7f92891778 ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The recently added nvlink2 VFIO driver introduced a license conflict in two
files. In both cases the SPDX license identifier is:
SPDX-License-Identifier: GPL-2.0+
but the files contain also the following license boiler plate text:
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation
The latter is GPL-2.9-only and not GPL-2.0=.
Looking deeper. The nvlink source file is derived from vfio_pci_igd.c which
is also licensed under GPL-2.0-only and it can be assumed that the file was
copied and modified. As the original file is licensed GPL-2.0-only it's not
possible to relicense derivative work to GPL-2.0-or-later.
Fix the SPDX identifier and remove the boiler plate as it is redundant.
Fixes: 7f92891778 ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: kvm@vger.kernel.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The below referenced commit adds a test for integer overflow, but in
doing so prevents the unmap ioctl from ever including the last page of
the address space. Subtract one to compare to the last address of the
unmap to avoid the overflow and wrap-around.
Fixes: 71a7d3d78e ("vfio/type1: silence integer overflow warning")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1662291
Cc: stable@vger.kernel.org # v4.15+
Reported-by: Pei Zhang <pezhang@redhat.com>
Debugged-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
drivers/vfio/pci/vfio_pci_nvlink2.c cannot be compiled for in-tree
building.
CC drivers/vfio/pci/vfio_pci_nvlink2.o
In file included from drivers/vfio/pci/trace.h:102,
from drivers/vfio/pci/vfio_pci_nvlink2.c:29:
./include/trace/define_trace.h:89:42: fatal error: ./trace.h: No such file or directory
#include TRACE_INCLUDE(TRACE_INCLUDE_FILE)
^
compilation terminated.
make[1]: *** [scripts/Makefile.build;277: drivers/vfio/pci/vfio_pci_nvlink2.o] Error 1
To fix the build error, let's tell include/trace/define_trace.h the
location of drivers/vfio/pci/trace.h
Fixes: 7f92891778 ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver")
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Including (in no particular order):
- Page table code for AMD IOMMU now supports large pages where
smaller page-sizes were mapped before. VFIO had to work around
that in the past and I included a patch to remove it (acked by
Alex Williamson)
- Patches to unmodularize a couple of IOMMU drivers that would
never work as modules anyway.
- Work to unify the the iommu-related pointers in
'struct device' into one pointer. This work is not finished
yet, but will probably be in the next cycle.
- NUMA aware allocation in iommu-dma code
- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
- Scalable mode support for the Intel VT-d driver
- PM runtime improvements for the ARM-SMMU driver
- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
- Various smaller fixes and improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=DT9A
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- Page table code for AMD IOMMU now supports large pages where smaller
page-sizes were mapped before. VFIO had to work around that in the
past and I included a patch to remove it (acked by Alex Williamson)
- Patches to unmodularize a couple of IOMMU drivers that would never
work as modules anyway.
- Work to unify the the iommu-related pointers in 'struct device' into
one pointer. This work is not finished yet, but will probably be in
the next cycle.
- NUMA aware allocation in iommu-dma code
- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
- Scalable mode support for the Intel VT-d driver
- PM runtime improvements for the ARM-SMMU driver
- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
- Various smaller fixes and improvements
* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
iommu: Check for iommu_ops == NULL in iommu_probe_device()
ACPI/IORT: Don't call iommu_ops->add_device directly
iommu/of: Don't call iommu_ops->add_device directly
iommu: Consolitate ->add/remove_device() calls
iommu/sysfs: Rename iommu_release_device()
dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
xhci: Use device_iommu_mapped()
powerpc/iommu: Use device_iommu_mapped()
ACPI/IORT: Use device_iommu_mapped()
iommu/of: Use device_iommu_mapped()
driver core: Introduce device_iommu_mapped() function
iommu/tegra: Use helper functions to access dev->iommu_fwspec
iommu/qcom: Use helper functions to access dev->iommu_fwspec
iommu/of: Use helper functions to access dev->iommu_fwspec
iommu/mediatek: Use helper functions to access dev->iommu_fwspec
iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
iommu/dma: Use helper functions to access dev->iommu_fwspec
iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
ACPI/IORT: Use helper functions to access dev->iommu_fwspec
iommu: Introduce wrappers around dev->iommu_fwspec
...
- Replace global vfio-pci lock with per bus lock to allow concurrent
open and release (Alex Williamson)
- Declare mdev function as static (Paolo Cretaro)
- Convert char to u8 in mdev/mtty sample driver (Nathan Chancellor)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=HOtX
-----END PGP SIGNATURE-----
Merge tag 'vfio-v4.21-rc1' of git://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Replace global vfio-pci lock with per bus lock to allow concurrent
open and release (Alex Williamson)
- Declare mdev function as static (Paolo Cretaro)
- Convert char to u8 in mdev/mtty sample driver (Nathan Chancellor)
* tag 'vfio-v4.21-rc1' of git://github.com/awilliam/linux-vfio:
vfio-mdev/samples: Use u8 instead of char for handle functions
vfio/mdev: add static modifier to add_mdev_supported_type
vfio/pci: Parallelize device open and release
POWER9 Witherspoon machines come with 4 or 6 V100 GPUs which are not
pluggable PCIe devices but still have PCIe links which are used
for config space and MMIO. In addition to that the GPUs have 6 NVLinks
which are connected to other GPUs and the POWER9 CPU. POWER9 chips
have a special unit on a die called an NPU which is an NVLink2 host bus
adapter with p2p connections to 2 to 3 GPUs, 3 or 2 NVLinks to each.
These systems also support ATS (address translation services) which is
a part of the NVLink2 protocol. Such GPUs also share on-board RAM
(16GB or 32GB) to the system via the same NVLink2 so a CPU has
cache-coherent access to a GPU RAM.
This exports GPU RAM to the userspace as a new VFIO device region. This
preregisters the new memory as device memory as it might be used for DMA.
This inserts pfns from the fault handler as the GPU memory is not onlined
until the vendor driver is loaded and trained the NVLinks so doing this
earlier causes low level errors which we fence in the firmware so
it does not hurt the host system but still better be avoided; for the same
reason this does not map GPU RAM into the host kernel (usual thing for
emulated access otherwise).
This exports an ATSD (Address Translation Shootdown) register of NPU which
allows TLB invalidations inside GPU for an operating system. The register
conveniently occupies a single 64k page. It is also presented to
the userspace as a new VFIO device region. One NPU has 8 ATSD registers,
each of them can be used for TLB invalidation in a GPU linked to this NPU.
This allocates one ATSD register per an NVLink bridge allowing passing
up to 6 registers. Due to the host firmware bug (just recently fixed),
only 1 ATSD register per NPU was actually advertised to the host system
so this passes that alone register via the first NVLink bridge device in
the group which is still enough as QEMU collects them all back and
presents to the guest via vPHB to mimic the emulated NPU PHB on the host.
In order to provide the userspace with the information about GPU-to-NVLink
connections, this exports an additional capability called "tgt"
(which is an abbreviated host system bus address). The "tgt" property
tells the GPU its own system address and allows the guest driver to
conglomerate the routing information so each GPU knows how to get directly
to the other GPUs.
For ATS to work, the nest MMU (an NVIDIA block in a P9 CPU) needs to
know LPID (a logical partition ID or a KVM guest hardware ID in other
words) and PID (a memory context ID of a userspace process, not to be
confused with a linux pid). This assigns a GPU to LPID in the NPU and
this is why this adds a listener for KVM on an IOMMU group. A PID comes
via NVLink from a GPU and NPU uses a PID wildcard to pass it through.
This requires coherent memory and ATSD to be available on the host as
the GPU vendor only supports configurations with both features enabled
and other configurations are known not to work. Because of this and
because of the ways the features are advertised to the host system
(which is a device tree with very platform specific properties),
this requires enabled POWERNV platform.
The V100 GPUs do not advertise any of these capabilities via the config
space and there are more than just one device ID so this relies on
the platform to tell whether these GPUs have special abilities such as
NVLinks.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
VFIO regions already support region capabilities with a limited set of
fields. However the subdriver might have to report to the userspace
additional bits.
This adds an add_capability() hook to vfio_pci_regops.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
So far we only allowed mapping of MMIO BARs to the userspace. However
there are GPUs with on-board coherent RAM accessible via side
channels which we also want to map to the userspace. The first client
for this is NVIDIA V100 GPU with NVLink2 direct links to a POWER9
NPU-enabled CPU; such GPUs have 16GB RAM which is coherently mapped
to the system address space, we are going to export these as an extra
PCI region.
We already support extra PCI regions and this adds support for mapping
them to the userspace.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This new memory does not have page structs as it is not plugged to
the host so gup() will fail anyway.
This adds 2 helpers:
- mm_iommu_newdev() to preregister the "memory device" memory so
the rest of API can still be used;
- mm_iommu_is_devmem() to know if the physical address is one of thise
new regions which we must avoid unpinning of.
This adds @mm to tce_page_is_contained() and iommu_tce_xchg() to test
if the memory is device memory to avoid pfn_to_page().
This adds a check for device memory in mm_iommu_ua_mark_dirty_rm() which
does delayed pages dirtying.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Normally mm_iommu_get() should add a reference and mm_iommu_put() should
remove it. However historically mm_iommu_find() does the referencing and
mm_iommu_get() is doing allocation and referencing.
We are going to add another helper to preregister device memory so
instead of having mm_iommu_new() (which pre-registers the normal memory
and references the region), we need separate helpers for pre-registering
and referencing.
This renames:
- mm_iommu_get to mm_iommu_new;
- mm_iommu_find to mm_iommu_get.
This changes mm_iommu_get() to reference the region so the name now
reflects what it does.
This removes the check for exact match from mm_iommu_new() as we want it
to fail on existing regions; mm_iommu_get() should be used instead.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
As a part of cleanup, the SPAPR TCE IOMMU subdriver releases preregistered
memory. If there is a bug in memory release, the loop in
tce_iommu_release() becomes infinite; this actually happened to me.
This makes the loop finite and prints a warning on every failure to make
the code more bug prone.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Set add_mdev_supported_type as static since it is only used within
mdev_sysfs.c. This fixes -Wmissing-prototypes gcc warning.
Signed-off-by: Paolo Cretaro <paolocretaro@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In commit 61d792562b ("vfio-pci: Use mutex around open, release, and
remove") a mutex was added to freeze the refcnt for a device so that
we can handle errors and perform bus resets on final close. However,
bus resets can be rather slow and a global mutex here is undesirable.
Evaluating the potential locking granularity, a per-device mutex
provides the best resolution but with multiple devices on a bus all
released concurrently, they'll race to acquire each other's mutex,
likely resulting in no reset at all if we use trylock. We therefore
lock at the granularity of the bus/slot reset as we're only attempting
a single reset for this group of devices anyway. This allows much
greater scaling as we're bounded in the number of devices protected by
a single reflck object.
Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Tested-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The AMD IOMMU driver can now map a huge-page where smaller
mappings existed before, so this code-path is no longer
triggered.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The powernv platform maintains 2 TCE tables for VFIO - a hardware TCE
table and a table with userspace addresses. These tables are radix trees,
we allocate indirect levels when they are written to. Since
the memory allocation is problematic in real mode, we have 2 accessors
to the entries:
- for virtual mode: it allocates the memory and it is always expected
to return non-NULL;
- fr real mode: it does not allocate and can return NULL.
Also, DMA windows can span to up to 55 bits of the address space and since
we never have this much RAM, such windows are sparse. However currently
the SPAPR TCE IOMMU driver walks through all TCEs to unpin DMA memory.
Since we maintain a userspace addresses table for VFIO which is a mirror
of the hardware table, we can use it to know which parts of the DMA
window have not been mapped and skip these so does this patch.
The bare metal systems do not have this problem as they use a bypass mode
of a PHB which maps RAM directly.
This helps a lot with sparse DMA windows, reducing the shutdown time from
about 3 minutes per 1 billion TCEs to a few seconds for 32GB sparse guest.
Just skipping the last level seems to be good enough.
As non-allocating accessor is used now in virtual mode as well, rename it
from IOMMU_TABLE_USERSPACE_ENTRY_RM (real mode) to _RO (read only).
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Currently the type-1 IOMMU instantiation depends on "ARM_SMMU ||
ARM_SMMU_V3", while it applies to other ARM/ARM64 platforms with an
IOMMU (e.g. Renesas VMSA-compatible IPMMUs).
Instead of extending the list of IOMMU types on ARM platforms, replace
the list by "ARM || ARM64", like other architectures do. The feature is
still restricted to ARM/ARM64 platforms with an IOMMU by the dependency
on IOMMU_API.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The SR-IOV spec requires that VFs must report zero for the INTx pin
register as VFs are precluded from INTx support. It's much easier for
the host kernel to understand whether a device is a VF and therefore
whether a non-zero pin register value is bogus than it is to do the
same in userspace. Override the INTx count for such devices and
virtualize the pin register to provide a consistent view of the device
to the user.
As this is clearly a spec violation, warn about it to support hardware
validation, but also provide a known whitelist as it doesn't do much
good to continue complaining if the hardware vendor doesn't plan to
fix it.
Known devices with this issue: 8086:270c
Tested-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Free allocated vdev->msi_perm in error path.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Notable changes:
- A fix for a bug in our page table fragment allocator, where a page table page
could be freed and reallocated for something else while still in use, leading
to memory corruption etc. The fix reuses pt_mm in struct page (x86 only) for
a powerpc only refcount.
- Fixes to our pkey support. Several are user-visible changes, but bring us in
to line with x86 behaviour and/or fix outright bugs. Thanks to Florian Weimer
for reporting many of these.
- A series to improve the hvc driver & related OPAL console code, which have
been seen to cause hardlockups at times. The hvc driver changes in particular
have been in linux-next for ~month.
- Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.
- Remove Power8 DD1 and Power9 DD1 support, neither chip should be in use
anywhere other than as a paper weight.
- An optimised memcmp implementation using Power7-or-later VMX instructions
- Support for barrier_nospec on some NXP CPUs.
- Support for flushing the count cache on context switch on some IBM CPUs
(controlled by firmware), as a Spectre v2 mitigation.
- A series to enhance the information we print on unhandled signals to bring it
into line with other arches, including showing the offending VMA and dumping
the instructions around the fault.
Thanks to:
Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey Kardashevskiy, Alexey
Spirkov, Alistair Popple, Andrew Donnellan, Aneesh Kumar K.V, Anju T Sudhakar,
Arnd Bergmann, Bartosz Golaszewski, Benjamin Herrenschmidt, Bharat Bhushan,
Bjoern Noetel, Boqun Feng, Breno Leitao, Bryant G. Ly, Camelia Groza,
Christophe Leroy, Christoph Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt,
Darren Stevens, Dave Young, David Gibson, Diana Craciun, Finn Thain, Florian
Weimer, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel Stanley,
Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh Salgaonkar, Markus
Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues, Michael Hanselmann, Michael
Neuling, Michael Schmitz, Mukesh Ojha, Murilo Opsfelder Araujo, Nicholas
Piggin, Parth Y Shah, Paul Mackerras, Paul Menzel, Ram Pai, Randy Dunlap,
Rashmica Gupta, Reza Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff,
Scott Wood, Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson,
Thiago Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat Rao
B, zhong jiang.
-----BEGIN PGP SIGNATURE-----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=PzRz
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"Notable changes:
- A fix for a bug in our page table fragment allocator, where a page
table page could be freed and reallocated for something else while
still in use, leading to memory corruption etc. The fix reuses
pt_mm in struct page (x86 only) for a powerpc only refcount.
- Fixes to our pkey support. Several are user-visible changes, but
bring us in to line with x86 behaviour and/or fix outright bugs.
Thanks to Florian Weimer for reporting many of these.
- A series to improve the hvc driver & related OPAL console code,
which have been seen to cause hardlockups at times. The hvc driver
changes in particular have been in linux-next for ~month.
- Increase our MAX_PHYSMEM_BITS to 128TB when SPARSEMEM_VMEMMAP=y.
- Remove Power8 DD1 and Power9 DD1 support, neither chip should be in
use anywhere other than as a paper weight.
- An optimised memcmp implementation using Power7-or-later VMX
instructions
- Support for barrier_nospec on some NXP CPUs.
- Support for flushing the count cache on context switch on some IBM
CPUs (controlled by firmware), as a Spectre v2 mitigation.
- A series to enhance the information we print on unhandled signals
to bring it into line with other arches, including showing the
offending VMA and dumping the instructions around the fault.
Thanks to: Aaro Koskinen, Akshay Adiga, Alastair D'Silva, Alexey
Kardashevskiy, Alexey Spirkov, Alistair Popple, Andrew Donnellan,
Aneesh Kumar K.V, Anju T Sudhakar, Arnd Bergmann, Bartosz Golaszewski,
Benjamin Herrenschmidt, Bharat Bhushan, Bjoern Noetel, Boqun Feng,
Breno Leitao, Bryant G. Ly, Camelia Groza, Christophe Leroy, Christoph
Hellwig, Cyril Bur, Dan Carpenter, Daniel Klamt, Darren Stevens, Dave
Young, David Gibson, Diana Craciun, Finn Thain, Florian Weimer,
Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven, Geoff Levand,
Guenter Roeck, Gustavo Romero, Haren Myneni, Hari Bathini, Joel
Stanley, Jonathan Neuschäfer, Kees Cook, Madhavan Srinivasan, Mahesh
Salgaonkar, Markus Elfring, Mathieu Malaterre, Mauro S. M. Rodrigues,
Michael Hanselmann, Michael Neuling, Michael Schmitz, Mukesh Ojha,
Murilo Opsfelder Araujo, Nicholas Piggin, Parth Y Shah, Paul
Mackerras, Paul Menzel, Ram Pai, Randy Dunlap, Rashmica Gupta, Reza
Arbab, Rodrigo R. Galvao, Russell Currey, Sam Bobroff, Scott Wood,
Shilpasri G Bhat, Simon Guo, Souptick Joarder, Stan Johnson, Thiago
Jung Bauermann, Tyrel Datwyler, Vaibhav Jain, Vasant Hegde, Venkat
Rao, zhong jiang"
* tag 'powerpc-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (234 commits)
powerpc/mm/book3s/radix: Add mapping statistics
powerpc/uaccess: Enable get_user(u64, *p) on 32-bit
powerpc/mm/hash: Remove unnecessary do { } while(0) loop
powerpc/64s: move machine check SLB flushing to mm/slb.c
powerpc/powernv/idle: Fix build error
powerpc/mm/tlbflush: update the mmu_gather page size while iterating address range
powerpc/mm: remove warning about ‘type’ being set
powerpc/32: Include setup.h header file to fix warnings
powerpc: Move `path` variable inside DEBUG_PROM
powerpc/powermac: Make some functions static
powerpc/powermac: Remove variable x that's never read
cxl: remove a dead branch
powerpc/powermac: Add missing include of header pmac.h
powerpc/kexec: Use common error handling code in setup_new_fdt()
powerpc/xmon: Add address lookup for percpu symbols
powerpc/mm: remove huge_pte_offset_and_shift() prototype
powerpc/lib: Use patch_site to patch copy_32 functions once cache is enabled
powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.
powerpc/fadump: merge adjacent memory ranges to reduce PT_LOAD segements
powerpc/fadump: handle crash memory ranges array index overflow
...
Thomas Gleixner
Ira Weiny
Linus Torvalds
Parav Pandit
Greg Kurz
Farhan Ali
Bjorn Helgaas
David Howells
Lu Baolu
Alex Williamson
Wang Hai
Louis Taylor
Eric Auger
Alexey Kardashevskiy
Chengguang Xu
Masahiro Yamada
Andy Shevchenko
Sam Bobroff
Paolo Cretaro
Joerg Roedel
Geert Uytterhoeven
Li Qiang