Граф коммитов

23369 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 4fc3acf291 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking updates from David Miller:

 1) Make syn floods consume significantly less resources by

    a) Not pre-COW'ing routing metrics for SYN/ACKs
    b) Mirroring the device queue mapping of the SYN for the SYN/ACK
       reply.

    Both from Eric Dumazet.

 2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA.

 3) Validate the length requested when building a paged SKB for a
    socket, so we don't overrun the page vector accidently.  From Jason
    Wang.

 4) When netlabel is disabled, we abort all IP option processing when we
    see a CIPSO option.  This isn't the right thing to do, we should
    simply skip over it and continue processing the remaining options
    (if any).  Fix from Paul Moore.

 5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel
    Apfelbaum.

 6) 8139cp enables the receiver before the ring address is properly
    programmed, which potentially lets the device crap over random
    memory.  Fix from Jason Wang.

 7) e1000/e1000e fixes for i217 RST handling, and an improper buffer
    address reference in jumbo RX frame processing from Bruce Allan and
    Sebastian Andrzej Siewior, respectively.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  fec_mpc52xx: fix timestamp filtering
  mcs7830: Implement link state detection
  e1000e: fix Rapid Start Technology support for i217
  e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()
  r8169: call netif_napi_del at errpaths and at driver unload
  tcp: reflect SYN queue_mapping into SYNACK packets
  tcp: do not create inetpeer on SYNACK message
  8139cp/8139too: terminate the eeprom access with the right opmode
  8139cp: set ring address before enabling receiver
  cipso: handle CIPSO options correctly when NetLabel is disabled
  net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()
  bql: Avoid possible inconsistent calculation.
  bql: Avoid unneeded limit decrement.
  bql: Fix POSDIFF() to integer overflow aware.
  net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP
  net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap
  net/mlx4_core: Fixes for VF / Guest startup flow
  net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event
  net/mlx4_core: Fix number of EQs used in ICM initialisation
  net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int
2012-06-02 16:22:51 -07:00
Linus Torvalds f309532bf3 tty: Revert the tty locking series, it needs more work
This reverts the tty layer change to use per-tty locking, because it's
not correct yet, and fixing it will require some more deep surgery.

The main revert is d29f3ef39b ("tty_lock: Localise the lock"), but
there are several smaller commits that built upon it, they also get
reverted here. The list of reverted commits is:

  fde86d3108 - tty: add lockdep annotations
  8f6576ad47 - tty: fix ldisc lock inversion trace
  d3ca8b64b9 - pty: Fix lock inversion
  b1d679afd7 - tty: drop the pty lock during hangup
  abcefe5fc3 - tty/amiserial: Add missing argument for tty_unlock()
  fd11b42e35 - cris: fix missing tty arg in wait_event_interruptible_tty call
  d29f3ef39b - tty_lock: Localise the lock

The revert had a trivial conflict in the 68360serial.c staging driver
that got removed in the meantime.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-02 15:21:43 -07:00
Eric Dumazet fff3269907 tcp: reflect SYN queue_mapping into SYNACK packets
While testing how linux behaves on SYNFLOOD attack on multiqueue device
(ixgbe), I found that SYNACK messages were dropped at Qdisc level
because we send them all on a single queue.

Obvious choice is to reflect incoming SYN packet @queue_mapping to
SYNACK packet.

Under stress, my machine could only send 25.000 SYNACK per second (for
200.000 incoming SYN per second). NIC : ixgbe with 16 rx/tx queues.

After patch, not a single SYNACK is dropped.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hans Schillstrom <hans.schillstrom@ericsson.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01 14:22:11 -04:00
Eric Dumazet 7433819a1e tcp: do not create inetpeer on SYNACK message
Another problem on SYNFLOOD/DDOS attack is the inetpeer cache getting
larger and larger, using lots of memory and cpu time.

tcp_v4_send_synack()
->inet_csk_route_req()
 ->ip_route_output_flow()
  ->rt_set_nexthop()
   ->rt_init_metrics()
    ->inet_getpeer( create = true)

This is a side effect of commit a4daad6b09 (net: Pre-COW metrics for
TCP) added in 2.6.39

Possible solution :

Instruct inet_csk_route_req() to remove FLOWI_FLAG_PRECOW_METRICS

Before patch :

# grep peer /proc/slabinfo
inet_peer_cache   4175430 4175430    192   42    2 : tunables    0    0    0 : slabdata  99415  99415      0

Samples: 41K of event 'cycles', Event count (approx.): 30716565122
+  20,24%      ksoftirqd/0  [kernel.kallsyms]           [k] inet_getpeer
+   8,19%      ksoftirqd/0  [kernel.kallsyms]           [k] peer_avl_rebalance.isra.1
+   4,81%      ksoftirqd/0  [kernel.kallsyms]           [k] sha_transform
+   3,64%      ksoftirqd/0  [kernel.kallsyms]           [k] fib_table_lookup
+   2,36%      ksoftirqd/0  [ixgbe]                     [k] ixgbe_poll
+   2,16%      ksoftirqd/0  [kernel.kallsyms]           [k] __ip_route_output_key
+   2,11%      ksoftirqd/0  [kernel.kallsyms]           [k] kernel_map_pages
+   2,11%      ksoftirqd/0  [kernel.kallsyms]           [k] ip_route_input_common
+   2,01%      ksoftirqd/0  [kernel.kallsyms]           [k] __inet_lookup_established
+   1,83%      ksoftirqd/0  [kernel.kallsyms]           [k] md5_transform
+   1,75%      ksoftirqd/0  [kernel.kallsyms]           [k] check_leaf.isra.9
+   1,49%      ksoftirqd/0  [kernel.kallsyms]           [k] ipt_do_table
+   1,46%      ksoftirqd/0  [kernel.kallsyms]           [k] hrtimer_interrupt
+   1,45%      ksoftirqd/0  [kernel.kallsyms]           [k] kmem_cache_alloc
+   1,29%      ksoftirqd/0  [kernel.kallsyms]           [k] inet_csk_search_req
+   1,29%      ksoftirqd/0  [kernel.kallsyms]           [k] __netif_receive_skb
+   1,16%      ksoftirqd/0  [kernel.kallsyms]           [k] copy_user_generic_string
+   1,15%      ksoftirqd/0  [kernel.kallsyms]           [k] kmem_cache_free
+   1,02%      ksoftirqd/0  [kernel.kallsyms]           [k] tcp_make_synack
+   0,93%      ksoftirqd/0  [kernel.kallsyms]           [k] _raw_spin_lock_bh
+   0,87%      ksoftirqd/0  [kernel.kallsyms]           [k] __call_rcu
+   0,84%      ksoftirqd/0  [kernel.kallsyms]           [k] rt_garbage_collect
+   0,84%      ksoftirqd/0  [kernel.kallsyms]           [k] fib_rules_lookup

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Hans Schillstrom <hans.schillstrom@ericsson.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-01 14:22:11 -04:00
Linus Torvalds 1193755ac6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs changes from Al Viro.
 "A lot of misc stuff.  The obvious groups:
   * Miklos' atomic_open series; kills the damn abuse of
     ->d_revalidate() by NFS, which was the major stumbling block for
     all work in that area.
   * ripping security_file_mmap() and dealing with deadlocks in the
     area; sanitizing the neighborhood of vm_mmap()/vm_munmap() in
     general.
   * ->encode_fh() switched to saner API; insane fake dentry in
     mm/cleancache.c gone.
   * assorted annotations in fs (endianness, __user)
   * parts of Artem's ->s_dirty work (jff2 and reiserfs parts)
   * ->update_time() work from Josef.
   * other bits and pieces all over the place.

  Normally it would've been in two or three pull requests, but
  signal.git stuff had eaten a lot of time during this cycle ;-/"

Fix up trivial conflicts in Documentation/filesystems/vfs.txt (the
'truncate_range' inode method was removed by the VM changes, the VFS
update adds an 'update_time()' method), and in fs/btrfs/ulist.[ch] (due
to sparse fix added twice, with other changes nearby).

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (95 commits)
  nfs: don't open in ->d_revalidate
  vfs: retry last component if opening stale dentry
  vfs: nameidata_to_filp(): don't throw away file on error
  vfs: nameidata_to_filp(): inline __dentry_open()
  vfs: do_dentry_open(): don't put filp
  vfs: split __dentry_open()
  vfs: do_last() common post lookup
  vfs: do_last(): add audit_inode before open
  vfs: do_last(): only return EISDIR for O_CREAT
  vfs: do_last(): check LOOKUP_DIRECTORY
  vfs: do_last(): make ENOENT exit RCU safe
  vfs: make follow_link check RCU safe
  vfs: do_last(): use inode variable
  vfs: do_last(): inline walk_component()
  vfs: do_last(): make exit RCU safe
  vfs: split do_lookup()
  Btrfs: move over to use ->update_time
  fs: introduce inode operation ->update_time
  reiserfs: get rid of resierfs_sync_super
  reiserfs: mark the superblock as dirty a bit later
  ...
2012-06-01 10:34:35 -07:00
Linus Torvalds 419f431949 Merge branch 'for-3.5' of git://linux-nfs.org/~bfields/linux
Pull the rest of the nfsd commits from Bruce Fields:
 "... and then I cherry-picked the remainder of the patches from the
  head of my previous branch"

This is the rest of the original nfsd branch, rebased without the
delegation stuff that I thought really needed to be redone.

I don't like rebasing things like this in general, but in this situation
this was the lesser of two evils.

* 'for-3.5' of git://linux-nfs.org/~bfields/linux: (50 commits)
  nfsd4: fix, consolidate client_has_state
  nfsd4: don't remove rebooted client record until confirmation
  nfsd4: remove some dprintk's and a comment
  nfsd4: return "real" sequence id in confirmed case
  nfsd4: fix exchange_id to return confirm flag
  nfsd4: clarify that renewing expired client is a bug
  nfsd4: simpler ordering of setclientid_confirm checks
  nfsd4: setclientid: remove pointless assignment
  nfsd4: fix error return in non-matching-creds case
  nfsd4: fix setclientid_confirm same_cred check
  nfsd4: merge 3 setclientid cases to 2
  nfsd4: pull out common code from setclientid cases
  nfsd4: merge last two setclientid cases
  nfsd4: setclientid/confirm comment cleanup
  nfsd4: setclientid remove unnecessary terms from a logical expression
  nfsd4: move rq_flavor into svc_cred
  nfsd4: stricter cred comparison for setclientid/exchange_id
  nfsd4: move principal name into svc_cred
  nfsd4: allow removing clients not holding state
  nfsd4: rearrange exchange_id logic to simplify
  ...
2012-06-01 08:32:58 -07:00
Al Viro d58367515f sch_atm.c: get rid of poinless extern
sockfd_lookup() is declared in linux/net.h, which is pulled by
linux/skbuff.h (and needed for a lot of other stuff in sch_atm.c
anyway).

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-01 10:37:18 -04:00
Linus Torvalds a00b6151a2 Merge branch 'for-3.5-take-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd update from Bruce Fields.

* 'for-3.5-take-2' of git://linux-nfs.org/~bfields/linux: (23 commits)
  nfsd: trivial: use SEEK_SET instead of 0 in vfs_llseek
  SUNRPC: split upcall function to extract reusable parts
  nfsd: allocate id-to-name and name-to-id caches in per-net operations.
  nfsd: make name-to-id cache allocated per network namespace context
  nfsd: make id-to-name cache allocated per network namespace context
  nfsd: pass network context to idmap init/exit functions
  nfsd: allocate export and expkey caches in per-net operations.
  nfsd: make expkey cache allocated per network namespace context
  nfsd: make export cache allocated per network namespace context
  nfsd: pass pointer to export cache down to stack wherever possible.
  nfsd: pass network context to export caches init/shutdown routines
  Lockd: pass network namespace to creation and destruction routines
  NFSd: remove hard-coded dereferences to name-to-id and id-to-name caches
  nfsd: pass pointer to expkey cache down to stack wherever possible.
  nfsd: use hash table from cache detail in nfsd export seq ops
  nfsd: pass svc_export_cache pointer as private data to "exports" seq file ops
  nfsd: use exp_put() for svc_export_cache put
  nfsd: use cache detail pointer from svc_export structure on cache put
  nfsd: add link to owner cache detail to svc_export structure
  nfsd: use passed cache_detail pointer expkey_parse()
  ...
2012-05-31 18:18:11 -07:00
J. Bruce Fields d5497fc693 nfsd4: move rq_flavor into svc_cred
Move the rq_flavor into struct svc_cred, and use it in setclientid and
exchange_id comparisons as well.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:58 -04:00
J. Bruce Fields 03a4e1f6dd nfsd4: move principal name into svc_cred
Instead of keeping the principal name associated with a request in a
structure that's private to auth_gss and using an accessor function,
move it to svc_cred.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:55 -04:00
J. Bruce Fields 3ddbe8794f svcrpc: fix a comment typo
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:49 -04:00
Jeff Layton 91c427ac3a sunrpc: do array overrun check in svc_recv before allocating pages
There's little point in waiting until after we allocate all of the pages
to see if we're going to overrun the array. In the event that this
calculation is really off we could end up scribbling over a bunch of
memory and make it tougher to debug.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:41 -04:00
Stanislav Kinsbursky 786185b5f8 SUNRPC: move per-net operations from svc_destroy()
The idea is to separate service destruction and per-net operations,
because these are two different things and the mix looks ugly.

Notes:

1) For NFS server this patch looks ugly (sorry for that). But these
place will be rewritten soon during NFSd containerization.

2) LockD per-net counter increase int lockd_up() was moved prior to
make_socks() to make lockd_down_net() call safe in case of error.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:40 -04:00
Stanislav Kinsbursky 9793f7c889 SUNRPC: new svc_bind() routine introduced
This new routine is responsible for service registration in a specified
network context.

The idea is to separate service creation from per-net operations.

Note also: since registering service with svc_bind() can fail, the
service will be destroyed and during destruction it will try to
unregister itself from rpcbind. In this case unregistration has to be
skipped.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:39 -04:00
J. Bruce Fields c52226daf5 rpc: handle rotated gss data for Windows interoperability
The data in Kerberos gss tokens can be rotated.  But we were lazy and
rejected any nonzero rotation value.  It wasn't necessary for the
implementations we were testing against at the time.

But it appears that Windows does use a nonzero value here.

So, implement rotation to bring ourselves into compliance with the spec
and to interoperate with Windows.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2012-05-31 20:29:39 -04:00
Jason Wang cc9b17ad29 net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()
We need to validate the number of pages consumed by data_len, otherwise frags
array could be overflowed by userspace. So this patch validate data_len and
return -EMSGSIZE when data_len may occupies more frags than MAX_SKB_FRAGS.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-31 18:22:45 -04:00
Linus Torvalds 13199a0845 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking changes from David S. Miller:

 1) Fix IPSEC header length calculation for transport mode in ESP.  The
    issue is whether to do the calculation before or after alignment.
    Fix from Benjamin Poirier.

 2) Fix regression in IPV6 IPSEC fragment length calculations, from Gao
    Feng.  This is another transport vs tunnel mode issue.

 3) Handle AF_UNSPEC connect()s properly in L2TP to avoid OOPSes.  Fix
    from James Chapman.

 4) Fix USB ASIX driver's reception of full sized VLAN packets, from
    Eric Dumazet.

 5) Allow drop monitor (and, more generically, all generic netlink
    protocols) to be automatically loaded as a module.  From Neil
    Horman.

Fix up trivial conflict in Documentation/feature-removal-schedule.txt
due to new entries added next to each other at the end. As usual.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
  net/smsc911x: Repair broken failure paths
  virtio-net: remove useless disable on freeze
  netdevice: Update netif_dbg for CONFIG_DYNAMIC_DEBUG
  drop_monitor: Add module alias to enable automatic module loading
  genetlink: Build a generic netlink family module alias
  net: add MODULE_ALIAS_NET_PF_PROTO_NAME
  r6040: Do a Proper deinit at errorpath and also when driver unloads (calling r6040_remove_one)
  r6040: disable pci device if the subsequent calls (after pci_enable_device) fails
  skb: avoid unnecessary reallocations in __skb_cow
  net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens
  asix: allow full size 8021Q frames to be received
  rds_rdma: don't assume infiniband device is PCI
  l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case
  mac80211: fix ADDBA declined after suspend with wowlan
  wlcore: fix undefined symbols when CONFIG_PM is not defined
  mac80211: fix flag check for QoS NOACK frames
  ath9k_hw: apply internal regulator settings on AR933x
  ath9k_hw: update AR933x initvals to fix issues with high power devices
  ath9k: fix a use-after-free-bug when ath_tx_setup_buffer() fails
  ath9k: stop rx dma before stopping tx
  ...
2012-05-31 10:32:36 -07:00
Linus Torvalds af56e0aa35 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull ceph updates from Sage Weil:
 "There are some updates and cleanups to the CRUSH placement code, a bug
  fix with incremental maps, several cleanups and fixes from Josh Durgin
  in the RBD block device code, a series of cleanups and bug fixes from
  Alex Elder in the messenger code, and some miscellaneous bounds
  checking and gfp cleanups/fixes."

Fix up trivial conflicts in net/ceph/{messenger.c,osdmap.c} due to the
networking people preferring "unsigned int" over just "unsigned".

* git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (45 commits)
  libceph: fix pg_temp updates
  libceph: avoid unregistering osd request when not registered
  ceph: add auth buf in prepare_write_connect()
  ceph: rename prepare_connect_authorizer()
  ceph: return pointer from prepare_connect_authorizer()
  ceph: use info returned by get_authorizer
  ceph: have get_authorizer methods return pointers
  ceph: ensure auth ops are defined before use
  ceph: messenger: reduce args to create_authorizer
  ceph: define ceph_auth_handshake type
  ceph: messenger: check return from get_authorizer
  ceph: messenger: rework prepare_connect_authorizer()
  ceph: messenger: check prepare_write_connect() result
  ceph: don't set WRITE_PENDING too early
  ceph: drop msgr argument from prepare_write_connect()
  ceph: messenger: send banner in process_connect()
  ceph: messenger: reset connection kvec caller
  libceph: don't reset kvec in prepare_write_banner()
  ceph: ignore preferred_osd field
  ceph: fully initialize new layout
  ...
2012-05-30 11:17:19 -07:00
John W. Linville a0f68763e1 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2012-05-30 10:32:16 -04:00
Neil Horman 3fdcbd4531 drop_monitor: Add module alias to enable automatic module loading
Now that we have module alias macros for generic netlink families, lets use
those to mark modules with the appropriate family names for loading

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29 22:33:56 -04:00
Neil Horman e9412c3708 genetlink: Build a generic netlink family module alias
Generic netlink searches for -type- formatted aliases when requesting a module to
fulfill a protocol request (i.e. net-pf-16-proto-16-type-<x>, where x is a type
value).  However generic netlink protocols have no well defined type numbers,
they have string names.  Modify genl_ctrl_getfamily to request an alias in the
format net-pf-16-proto-16-family-<x> instead, where x is a generic string, and
add a macro that builds on the previously added MODULE_ALIAS_NET_PF_PROTO_NAME
macro to allow modules to specifify those generic strings.

Note, l2tp previously hacked together an net-pf-16-proto-16-type-l2tp alias
using the MODULE_ALIAS macro, with these updates we can convert that to use the
PROTO_NAME macro.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: James Chapman <jchapman@katalix.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29 22:33:56 -04:00
Glauber Costa 3f13461939 memcg: decrement static keys at real destroy time
We call the destroy function when a cgroup starts to be removed, such as
by a rmdir event.

However, because of our reference counters, some objects are still
inflight.  Right now, we are decrementing the static_keys at destroy()
time, meaning that if we get rid of the last static_key reference, some
objects will still have charges, but the code to properly uncharge them
won't be run.

This becomes a problem specially if it is ever enabled again, because now
new charges will be added to the staled charges making keeping it pretty
much impossible.

We just need to be careful with the static branch activation: since there
is no particular preferred order of their activation, we need to make sure
that we only start using it after all call sites are active.  This is
achieved by having a per-memcg flag that is only updated after
static_key_slow_inc() returns.  At this time, we are sure all sites are
active.

This is made per-memcg, not global, for a reason: it also has the effect
of making socket accounting more consistent.  The first memcg to be
limited will trigger static_key() activation, therefore, accounting.  But
all the others will then be accounted no matter what.  After this patch,
only limited memcgs will have its sockets accounted.

[akpm@linux-foundation.org: move enum sock_flag_bits into sock.h,
                            document enum sock_flag_bits,
                            convert memcg_proto_active() and memcg_proto_activated() to test_bit(),
                            redo tcp_update_limit() comment to 80 cols]
Signed-off-by: Glauber Costa <glommer@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-29 16:22:28 -07:00
Thadeu Lima de Souza Cascardo a0c6ffbcfe rds_rdma: don't assume infiniband device is PCI
RDS code assumes that the struct ib_device dma_device member, which is a
pointer, points to a struct device embedded in a struct pci_dev.

This is not the case for ehca, for example, which is a OF driver, and
makes dma_device point to a struct device embedded in a struct
platform_device.

This will make the system crash when rds_rdma is loaded in a system
with ehca, since it will try to access the bus member of a non-existent
struct pci_dev.

The only reason rds_rdma uses the struct pci_dev is to get the NUMA node
the device is attached to. Using dev_to_node for that is much better,
since it won't assume which bus the infiniband is attached to.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Cc: dledford@redhat.com
Cc: Jes.Sorensen@redhat.com
Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Acked-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29 17:30:07 -04:00
James Chapman c51ce49735 l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case
An application may call connect() to disconnect a socket using an
address with family AF_UNSPEC. The L2TP IP sockets were not handling
this case when the socket is not bound and an attempt to connect()
using AF_UNSPEC in such cases would result in an oops. This patch
addresses the problem by protecting the sk_prot->disconnect() call
against trying to unhash the socket before it is bound.

The L2TP IPv4 and IPv6 sockets have the same problem. Both are fixed
by this patch.

The patch also adds more checks that the sockaddr supplied to bind()
and connect() calls is valid.

 RIP: 0010:[<ffffffff82e133b0>]  [<ffffffff82e133b0>] inet_unhash+0x50/0xd0
 RSP: 0018:ffff88001989be28  EFLAGS: 00010293
 Stack:
  ffff8800407a8000 0000000000000000 ffff88001989be78 ffffffff82e3a249
  ffffffff82e3a050 ffff88001989bec8 ffff88001989be88 ffff8800407a8000
  0000000000000010 ffff88001989bec8 ffff88001989bea8 ffffffff82e42639
 Call Trace:
 [<ffffffff82e3a249>] udp_disconnect+0x1f9/0x290
 [<ffffffff82e42639>] inet_dgram_connect+0x29/0x80
 [<ffffffff82d012fc>] sys_connect+0x9c/0x100

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29 17:19:44 -04:00
Eyal Shapira 7b21aea04d mac80211: fix ADDBA declined after suspend with wowlan
WLAN_STA_BLOCK_BA is set while suspending but doesn't get cleared
when resuming in case of wowlan. This causes further ADDBA requests
received to be rejected. Fix it by clearing it in the wowlan path
as well.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Cc: stable@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29 13:45:24 -04:00
Claudio Pisa c26a0e105c mac80211: fix flag check for QoS NOACK frames
Signed-off-by: Claudio Pisa <claudio.pisa@uniroma2.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-29 13:45:23 -04:00
Linus Torvalds 53f2c4a8fd NFS client updates for Linux 3.5
New features include:
 - Rewrite the O_DIRECT code so that it can share the same coalescing and
   pNFS functionality as the page cache code.
 - Allow the server to provide hints as to when we should use pNFS, and
   when it is more efficient to read and write through the metadata
   server.
 - NFS cache consistency updates:
   - Use the ctime to emulate a change attribute for NFSv2/v3 so that
     all NFS versions can share the same cache management code.
   - New cache management code will only look at the change attribute
     and size attribute when deciding whether or not our cached data
     is still valid or not.
   - Don't request NFSv4 post-op attributes on writes in cases such as
     O_DIRECT, where we don't care about data cache consistency, or
     when we have a write delegation, and know that our cache is
     still consistent.
   - Don't request NFSv4 post-op attributes on operations such as
     COMMIT, where there are no expected metadata updates.
   - Don't request NFSv4 directory post-op attributes in cases where
     the operations themselves already return change attribute updates:
     i.e.  operations such as OPEN, CREATE, REMOVE, LINK and RENAME.
 - Speed up 'ls' and friends by using READDIR rather than READDIRPLUS
   if we detect no attempts to lookup filenames.
 - Improve the code sharing between NFSv2/v3 and v4 mounts
 - NFSv4.1 state management efficiency improvements
 - More patches in preparation for NFSv4/v4.1 migration functionality.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJPw/MNAAoJEGcL54qWCgDyxU8P/2kKqhAlhoLEArBqo9FT3/OK
 YrNs5uO/erTgnCG8L0XQvTKjHB9F7TAeFXqTmBZuPlb1afRpHHt2vzPqzIvUCeOC
 ZXm8vzZf4nxWZgEFoTDdUBvqQi9lLdIzCRhSaVCKcRnNwiuaKDd/iwykbWGcHqmv
 jtR4lzXPllJdKCUL3yb3juVrpq6Vvn254ID2pqdnYcEtIJIHgaRZpwdp4Iz9+8b5
 Moishiw2rgCBJIhf+VCYd8B2oYfMgSDPxG1o3etkwY46qo+4s+CIls9Vu/6YzGXK
 3+NdLatRDqKhQpLm0/R+dI3rntnTZ8x6LgWnTGxUsiqb6pAaHZPK284rf2eh/s7M
 Q4G4203r0uw539kIt6eKOGqC9c8kZAPCHlQSPCaImZyCJsz+6OMShNlGB5bZpFPr
 tbdxaxudrhCF7UVKXicJCWgv2nIHtek6fNwey1jqFoYgZP5ipiBKymvXQC5WAMBw
 7RHJor/JEC+UJkVg/7Mkpg0UNw3E36CTYLeRJKlNCS6YO9NJQseCDxhhMNAy/ab7
 RGO8DVMkUsOUH20S+a19LyeFQtveWFIE0DiDqRn0KnNGhGwHrv2t4xFukjlrf4Sw
 8FQUBRdtFxfmspfA1IdoTY49XZQda5eagvTy1MyaWEh+jPSJ4G5j3sSjFiaKAJqw
 79iQKFGkxPOSHx2yCdAF
 =suVW
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates from Trond Myklebust:
 "New features include:
   - Rewrite the O_DIRECT code so that it can share the same coalescing
     and pNFS functionality as the page cache code.
   - Allow the server to provide hints as to when we should use pNFS,
     and when it is more efficient to read and write through the
     metadata server.
   - NFS cache consistency updates:
     * Use the ctime to emulate a change attribute for NFSv2/v3 so that
       all NFS versions can share the same cache management code.
     * New cache management code will only look at the change attribute
       and size attribute when deciding whether or not our cached data
       is still valid or not.
     * Don't request NFSv4 post-op attributes on writes in cases such as
       O_DIRECT, where we don't care about data cache consistency, or
       when we have a write delegation, and know that our cache is still
       consistent.
     * Don't request NFSv4 post-op attributes on operations such as
       COMMIT, where there are no expected metadata updates.
     * Don't request NFSv4 directory post-op attributes in cases where
       the operations themselves already return change attribute
       updates: i.e. operations such as OPEN, CREATE, REMOVE, LINK and
       RENAME.
   - Speed up 'ls' and friends by using READDIR rather than READDIRPLUS
     if we detect no attempts to lookup filenames.
   - Improve the code sharing between NFSv2/v3 and v4 mounts
   - NFSv4.1 state management efficiency improvements
   - More patches in preparation for NFSv4/v4.1 migration functionality."

Fix trivial conflict in fs/nfs/nfs4proc.c that was due to the dcache
qstr name initialization changes (that made the length/hash a 64-bit
union)

* tag 'nfs-for-3.5-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (146 commits)
  NFSv4: Add debugging printks to state manager
  NFSv4: Map NFS4ERR_SHARE_DENIED into an EACCES error instead of EIO
  NFSv4: update_changeattr does not need to set NFS_INO_REVAL_PAGECACHE
  NFSv4.1: nfs4_reset_session should use nfs4_handle_reclaim_lease_error
  NFSv4.1: Handle other occurrences of NFS4ERR_CONN_NOT_BOUND_TO_SESSION
  NFSv4.1: Handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION in the state manager
  NFSv4.1: Handle errors in nfs4_bind_conn_to_session
  NFSv4.1: nfs4_bind_conn_to_session should drain the session
  NFSv4.1: Don't clobber the seqid if exchange_id returns a confirmed clientid
  NFSv4.1: Add DESTROY_CLIENTID
  NFSv4.1: Ensure we use the correct credentials for bind_conn_to_session
  NFSv4.1: Ensure we use the correct credentials for session create/destroy
  NFSv4.1: Move NFSPROC4_CLNT_BIND_CONN_TO_SESSION to the end of the operations
  NFSv4.1: Handle NFS4ERR_SEQ_MISORDERED when confirming the lease
  NFSv4: When purging the lease, we must clear NFS4CLNT_LEASE_CONFIRM
  NFSv4: Clean up the error handling for nfs4_reclaim_lease
  NFSv4.1: Exchange ID must use GFP_NOFS allocation mode
  nfs41: Use BIND_CONN_TO_SESSION for CB_PATH_DOWN*
  nfs4.1: add BIND_CONN_TO_SESSION operation
  NFSv4.1 test the mdsthreshold hint parameters
  ...
2012-05-29 10:43:51 -07:00
Gao feng 0c1833797a ipv6: fix incorrect ipsec fragment
Since commit ad0081e43a
"ipv6: Fragment locally generated tunnel-mode IPSec6 packets as needed"
the fragment of packets is incorrect.
because tunnel mode needs IPsec headers and trailer for all fragments,
while on transport mode it is sufficient to add the headers to the
first fragment and the trailer to the last.

so modify mtu and maxfraglen base on ipsec mode and if fragment is first
or last.

with my test,it work well(every fragment's size is the mtu)
and does not trigger slow fragment path.

Changes from v1:
	though optimization, mtu_prev and maxfraglen_prev can be delete.
	replace xfrm mode codes with dst_entry's new frag DST_XFRM_TUNNEL.
	add fuction ip6_append_data_mtu to make codes clearer.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-27 01:11:22 -04:00
Benjamin Poirier 91657eafb6 xfrm: take net hdr len into account for esp payload size calculation
Corrects the function that determines the esp payload size. The calculations
done in esp{4,6}_get_mtu() lead to overlength frames in transport mode for
certain mtu values and suboptimal frames for others.

According to what is done, mainly in esp{,6}_output() and tcp_mtu_to_mss(),
net_header_len must be taken into account before doing the alignment
calculation.

Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-27 01:08:29 -04:00
Soumik Das 992e68bf2e mac80211: Fix race in checking AP status by sending null frame
mac80211 tries to verify the existence of the current AP by
probing or sending a NULL frame in function
ieee80211_mgd_probe_ap_send. It 1st sends a null frame to the AP,
increments probe_send_count and waits for the ACK to the NULL
frame for a finite duration of time. At times, it happens that by
the time mac80211 gets to increment probe_send_count, the ACK for
the NULL frame transmitted has already been processed. This leads
to a race condition where mac80211 times out waiting for the ACK
for the NULL frame causing unnecessary disconnection with the AP.

Signed-off-by: Soumik Das <soumik.das@stericsson.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-05-25 11:16:16 -04:00
Joe Perches f0d1b3c2bc net/wanrouter: Deprecate and schedule for removal
No one uses this on current kernels anymore.

Let it be known it's going to be removed eventually.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24 16:22:53 -04:00
Linus Torvalds 28f3d71761 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull more networking updates from David Miller:
 "Ok, everything from here on out will be bug fixes."

1) One final sync of wireless and bluetooth stuff from John Linville.
   These changes have all been in his tree for more than a week, and
   therefore have had the necessary -next exposure.  John was just away
   on a trip and didn't have a change to send the pull request until a
   day or two ago.

2) Put back some defines in user exposed header file areas that were
   removed during the tokenring purge.  From Stephen Hemminger and Paul
   Gortmaker.

3) A bug fix for UDP hash table allocation got lost in the pile due to
   one of those "you got it..  no I've got it.." situations.  :-)

   From Tim Bird.

4) SKB coalescing in TCP needs to have stricter checks, otherwise we'll
   try to coalesce overlapping frags and crash.  Fix from Eric Dumazet.

5) RCU routing table lookups can race with free_fib_info(), causing
   crashes when we deref the device pointers in the route.  Fix by
   releasing the net device in the RCU callback.  From Yanmin Zhang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (293 commits)
  tcp: take care of overlaps in tcp_try_coalesce()
  ipv4: fix the rcu race between free_fib_info and ip_route_output_slow
  mm: add a low limit to alloc_large_system_hash
  ipx: restore token ring define to include/linux/ipx.h
  if: restore token ring ARP type to header
  xen: do not disable netfront in dom0
  phy/micrel: Fix ID of KSZ9021
  mISDN: Add X-Tensions USB ISDN TA XC-525
  gianfar:don't add FCB length to hard_header_len
  Bluetooth: Report proper error number in disconnection
  Bluetooth: Create flags for bt_sk()
  Bluetooth: report the right security level in getsockopt
  Bluetooth: Lock the L2CAP channel when sending
  Bluetooth: Restore locking semantics when looking up L2CAP channels
  Bluetooth: Fix a redundant and problematic incoming MTU check
  Bluetooth: Add support for Foxconn/Hon Hai AR5BBU22 0489:E03C
  Bluetooth: Fix EIR data generation for mgmt_device_found
  Bluetooth: Fix Inquiry with RSSI event mask
  Bluetooth: improve readability of l2cap_seq_list code
  Bluetooth: Fix skb length calculation
  ...
2012-05-24 11:54:29 -07:00
Eric Dumazet 1ca7ee3063 tcp: take care of overlaps in tcp_try_coalesce()
Sergio Correia reported following warning :

WARNING: at net/ipv4/tcp.c:1301 tcp_cleanup_rbuf+0x4f/0x110()

WARN(skb && !before(tp->copied_seq, TCP_SKB_CB(skb)->end_seq),
     "cleanup rbuf bug: copied %X seq %X rcvnxt %X\n",
     tp->copied_seq, TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt);

It appears TCP coalescing, and more specifically commit b081f85c29
(net: implement tcp coalescing in tcp_queue_rcv()) should take care of
possible segment overlaps in receive queue. This was properly done in
the case of out_or_order_queue by the caller.

For example, segment at tail of queue have sequence 1000-2000, and we
add a segment with sequence 1500-2500.
This can happen in case of retransmits.

In this case, just don't do the coalescing.

Reported-by: Sergio Correia <lists@uece.net>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Sergio Correia <lists@uece.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24 00:28:21 -04:00
Yanmin Zhang e49cc0da72 ipv4: fix the rcu race between free_fib_info and ip_route_output_slow
We hit a kernel OOPS.

<3>[23898.789643] BUG: sleeping function called from invalid context at
/data/buildbot/workdir/ics/hardware/intel/linux-2.6/arch/x86/mm/fault.c:1103
<3>[23898.862215] in_atomic(): 0, irqs_disabled(): 0, pid: 10526, name:
Thread-6683
<4>[23898.967805] HSU serial 0000:00:05.1: 0000:00:05.2:HSU serial prevented me
to suspend...
<4>[23899.258526] Pid: 10526, comm: Thread-6683 Tainted: G        W
3.0.8-137685-ge7742f9 #1
<4>[23899.357404] HSU serial 0000:00:05.1: 0000:00:05.2:HSU serial prevented me
to suspend...
<4>[23899.904225] Call Trace:
<4>[23899.989209]  [<c1227f50>] ? pgtable_bad+0x130/0x130
<4>[23900.000416]  [<c1238c2a>] __might_sleep+0x10a/0x110
<4>[23900.007357]  [<c1228021>] do_page_fault+0xd1/0x3c0
<4>[23900.013764]  [<c18e9ba9>] ? restore_all+0xf/0xf
<4>[23900.024024]  [<c17c007b>] ? napi_complete+0x8b/0x690
<4>[23900.029297]  [<c1227f50>] ? pgtable_bad+0x130/0x130
<4>[23900.123739]  [<c1227f50>] ? pgtable_bad+0x130/0x130
<4>[23900.128955]  [<c18ea0c3>] error_code+0x5f/0x64
<4>[23900.133466]  [<c1227f50>] ? pgtable_bad+0x130/0x130
<4>[23900.138450]  [<c17f6298>] ? __ip_route_output_key+0x698/0x7c0
<4>[23900.144312]  [<c17f5f8d>] ? __ip_route_output_key+0x38d/0x7c0
<4>[23900.150730]  [<c17f63df>] ip_route_output_flow+0x1f/0x60
<4>[23900.156261]  [<c181de58>] ip4_datagram_connect+0x188/0x2b0
<4>[23900.161960]  [<c18e981f>] ? _raw_spin_unlock_bh+0x1f/0x30
<4>[23900.167834]  [<c18298d6>] inet_dgram_connect+0x36/0x80
<4>[23900.173224]  [<c14f9e88>] ? _copy_from_user+0x48/0x140
<4>[23900.178817]  [<c17ab9da>] sys_connect+0x9a/0xd0
<4>[23900.183538]  [<c132e93c>] ? alloc_file+0xdc/0x240
<4>[23900.189111]  [<c123925d>] ? sub_preempt_count+0x3d/0x50

Function free_fib_info resets nexthop_nh->nh_dev to NULL before releasing
fi. Other cpu might be accessing fi. Fixing it by delaying the releasing.

With the patch, we ran MTBF testing on Android mobile for 12 hours
and didn't trigger the issue.

Thank Eric for very detailed review/checking the issue.

Signed-off-by: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Signed-off-by: Kun Jiang <kunx.jiang@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24 00:28:21 -04:00
Tim Bird 31fe62b958 mm: add a low limit to alloc_large_system_hash
UDP stack needs a minimum hash size value for proper operation and also
uses alloc_large_system_hash() for proper NUMA distribution of its hash
tables and automatic sizing depending on available system memory.

On some low memory situations, udp_table_init() must ignore the
alloc_large_system_hash() result and reallocs a bigger memory area.

As we cannot easily free old hash table, we leak it and kmemleak can
issue a warning.

This patch adds a low limit parameter to alloc_large_system_hash() to
solve this problem.

We then specify UDP_HTABLE_SIZE_MIN for UDP/UDPLite hash table
allocation.

Reported-by: Mark Asselstine <mark.asselstine@windriver.com>
Reported-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24 00:28:21 -04:00
Linus Torvalds 644473e9c6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace enhancements from Eric Biederman:
 "This is a course correction for the user namespace, so that we can
  reach an inexpensive, maintainable, and reasonably complete
  implementation.

  Highlights:
   - Config guards make it impossible to enable the user namespace and
     code that has not been converted to be user namespace safe.

   - Use of the new kuid_t type ensures the if you somehow get past the
     config guards the kernel will encounter type errors if you enable
     user namespaces and attempt to compile in code whose permission
     checks have not been updated to be user namespace safe.

   - All uids from child user namespaces are mapped into the initial
     user namespace before they are processed.  Removing the need to add
     an additional check to see if the user namespace of the compared
     uids remains the same.

   - With the user namespaces compiled out the performance is as good or
     better than it is today.

   - For most operations absolutely nothing changes performance or
     operationally with the user namespace enabled.

   - The worst case performance I could come up with was timing 1
     billion cache cold stat operations with the user namespace code
     enabled.  This went from 156s to 164s on my laptop (or 156ns to
     164ns per stat operation).

   - (uid_t)-1 and (gid_t)-1 are reserved as an internal error value.
     Most uid/gid setting system calls treat these value specially
     anyway so attempting to use -1 as a uid would likely cause
     entertaining failures in userspace.

   - If setuid is called with a uid that can not be mapped setuid fails.
     I have looked at sendmail, login, ssh and every other program I
     could think of that would call setuid and they all check for and
     handle the case where setuid fails.

   - If stat or a similar system call is called from a context in which
     we can not map a uid we lie and return overflowuid.  The LFS
     experience suggests not lying and returning an error code might be
     better, but the historical precedent with uids is different and I
     can not think of anything that would break by lying about a uid we
     can't map.

   - Capabilities are localized to the current user namespace making it
     safe to give the initial user in a user namespace all capabilities.

  My git tree covers all of the modifications needed to convert the core
  kernel and enough changes to make a system bootable to runlevel 1."

Fix up trivial conflicts due to nearby independent changes in fs/stat.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
  userns:  Silence silly gcc warning.
  cred: use correct cred accessor with regards to rcu read lock
  userns: Convert the move_pages, and migrate_pages permission checks to use uid_eq
  userns: Convert cgroup permission checks to use uid_eq
  userns: Convert tmpfs to use kuid and kgid where appropriate
  userns: Convert sysfs to use kgid/kuid where appropriate
  userns: Convert sysctl permission checks to use kuid and kgids.
  userns: Convert proc to use kuid/kgid where appropriate
  userns: Convert ext4 to user kuid/kgid where appropriate
  userns: Convert ext3 to use kuid/kgid where appropriate
  userns: Convert ext2 to use kuid/kgid where appropriate.
  userns: Convert devpts to use kuid/kgid where appropriate
  userns: Convert binary formats to use kuid/kgid where appropriate
  userns: Add negative depends on entries to avoid building code that is userns unsafe
  userns: signal remove unnecessary map_cred_ns
  userns: Teach inode_capable to understand inodes whose uids map to other namespaces.
  userns: Fail exec for suid and sgid binaries with ids outside our user namespace.
  userns: Convert stat to return values mapped from kuids and kgids
  userns: Convert user specfied uids and gids in chown into kuids and kgid
  userns: Use uid_eq gid_eq helpers when comparing kuids and kgids in the vfs
  ...
2012-05-23 17:42:39 -07:00
Linus Torvalds e8650a0823 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial updates from Jiri Kosina:
 "As usual, it's mostly typo fixes, redundant code elimination and some
  documentation updates."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits)
  edac, mips: don't change code that has been removed in edac/mips tree
  xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer
  lib: Change mail address of Oskar Schirmer
  net: Change mail address of Oskar Schirmer
  arm/m68k: Change mail address of Sebastian Hess
  i2c: Change mail address of Oskar Schirmer
  net: Fix tcp_build_and_update_options comment in struct tcp_sock
  atomic64_32.h: fix parameter naming mismatch
  Kconfig: replace "--- help ---" with "---help---"
  c2port: fix bogus Kconfig "default no"
  edac: Fix spelling errors.
  qla1280: Remove redundant NULL check before release_firmware() call
  remoteproc: remove redundant NULL check before release_firmware()
  qla2xxx: Remove redundant NULL check before release_firmware() call.
  aic94xx: Get rid of redundant NULL check before release_firmware() call
  tehuti: delete redundant NULL check before release_firmware()
  qlogic: get rid of a redundant test for NULL before call to release_firmware()
  bna: remove redundant NULL test before release_firmware()
  tg3: remove redundant NULL test before release_firmware() call
  typhoon: get rid of redundant conditional before all to release_firmware()
  ...
2012-05-22 19:22:50 -07:00
Linus Torvalds 3c2c4b73aa Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID subsystem updates from Jiri Kosina:
 "Apart from various driver updates and added support for a number of
  new devices (mostly multitouch ones, but not limited to), there is one
  change that is worth pointing out explicitly: creation of HID device
  groups and proper autoloading of hid-multitouch, implemented by Henrik
  Rydberg."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (50 commits)
  HID: wacom: fix build breakage without CONFIG_LEDS_CLASS
  HID: waltop: Extend barrel button fix
  HID: hyperv: Set the hid drvdata correctly
  HID: wacom: Unify speed setting
  HID: wacom: Add speed setting for Intuos4 WL
  HID: wacom: Move Graphire raport header check.
  HID: uclogic: Add support for UC-Logic TWHL850
  HID: explain the signed/unsigned handling in hid_add_field()
  HID: handle logical min/max signedness properly in parser
  HID: logitech: read all 32 bits of report type bitfield
  HID: wacom: Add LED selector control for Wacom Intuos4 WL
  HID: hid-multitouch: fix wrong protocol detection
  HID: wiimote: Fix IR data parser
  HID: wacom: Add tilt reporting for Intuos4 WL
  HID: multitouch: MT interface matching for Baanto
  HID: hid-multitouch: Only match MT interfaces
  HID: Create a common generic driver
  HID: hid-multitouch: Switch to device groups
  HID: Create a generic device group
  HID: Allow bus wildcard matching
  ...
2012-05-22 19:21:48 -07:00
Linus Torvalds 88d6ae8dc3 Merge branch 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
 "cgroup file type addition / removal is updated so that file types are
  added and removed instead of individual files so that dynamic file
  type addition / removal can be implemented by cgroup and used by
  controllers.  blkio controller changes which will come through block
  tree are dependent on this.  Other changes include res_counter cleanup
  and disallowing kthread / PF_THREAD_BOUND threads to be attached to
  non-root cgroups.

  There's a reported bug with the file type addition / removal handling
  which can lead to oops on cgroup umount.  The issue is being looked
  into.  It shouldn't cause problems for most setups and isn't a
  security concern."

Fix up trivial conflict in Documentation/feature-removal-schedule.txt

* 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
  res_counter: Account max_usage when calling res_counter_charge_nofail()
  res_counter: Merge res_counter_charge and res_counter_charge_nofail
  cgroups: disallow attaching kthreadd or PF_THREAD_BOUND threads
  cgroup: remove cgroup_subsys->populate()
  cgroup: get rid of populate for memcg
  cgroup: pass struct mem_cgroup instead of struct cgroup to socket memcg
  cgroup: make css->refcnt clearing on cgroup removal optional
  cgroup: use negative bias on css->refcnt to block css_tryget()
  cgroup: implement cgroup_rm_cftypes()
  cgroup: introduce struct cfent
  cgroup: relocate __d_cgrp() and __d_cft()
  cgroup: remove cgroup_add_file[s]()
  cgroup: convert memcg controller to the new cftype interface
  memcg: always create memsw files if CONFIG_CGROUP_MEM_RES_CTLR_SWAP
  cgroup: convert all non-memcg controllers to the new cftype interface
  cgroup: relocate cftype and cgroup_subsys definitions in controllers
  cgroup: merge cft_release_agent cftype array into the base files array
  cgroup: implement cgroup_add_cftypes() and friends
  cgroup: build list of all cgroups under a given cgroupfs_root
  cgroup: move cgroup_clear_directory() call out of cgroup_populate_dir()
  ...
2012-05-22 17:40:19 -07:00
Linus Torvalds f5c101892f Merge branch 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
 "Contains Alex Shi's three patches to remove percpu_xxx() which overlap
  with this_cpu_xxx().  There shouldn't be any functional change."

* 'for-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: remove percpu_xxx() functions
  x86: replace percpu_xxx funcs with this_cpu_xxx
  net: replace percpu_xxx funcs with this_cpu_xxx or __this_cpu_xxx
2012-05-22 17:37:47 -07:00
Linus Torvalds 94b5aff4c6 TTY pull request for 3.5-rc1
Here's the big TTY/serial driver pull request for the 3.5-rc1 merge window.
 
 Nothing major in here, just lots of incremental changes from Alan and
 Jiri reworking some tty core things to behave better and to get a more
 solid grasp on some of the nasty tty locking issues.
 
 There are a few tty and serial driver updates in here as well.
 
 All of this has been in the linux-next releases for a while with no problems.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.18 (GNU/Linux)
 
 iEYEABECAAYFAk+7rBoACgkQMUfUDdst+ykXsgCfeDKx6ZgLidYy3H40Y2Pt3XEO
 TicAn1fcdGwOmMR/mowa+kTA68D/J6i2
 =S7tG
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull TTY updates from Greg Kroah-Hartman:
 "Here's the big TTY/serial driver pull request for the 3.5-rc1 merge
  window.

  Nothing major in here, just lots of incremental changes from Alan and
  Jiri reworking some tty core things to behave better and to get a more
  solid grasp on some of the nasty tty locking issues.

  There are a few tty and serial driver updates in here as well.

  All of this has been in the linux-next releases for a while with no
  problems.

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'tty-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (115 commits)
  serial: bfin_uart: Make MMR access compatible with 32 bits bf609 style controller.
  serial: bfin_uart: RTS and CTS MMRs can be either 16-bit width or 32-bit width.
  serial: bfin_uart: narrow the reboot condition in DMA tx interrupt
  serial: bfin_uart: Adapt bf5xx serial driver to bf60x serial4 controller.
  Revert "serial_core: Update buffer overrun statistics."
  tty: hvc_xen: NULL dereference on allocation failure
  tty: Fix LED error return
  tty: Allow uart_register/unregister/register
  tty: move global ldisc idle waitqueue to the individual ldisc
  serial8250-em: Add DT support
  serial8250-em: clk_get() IS_ERR() error handling fix
  serial_core: Update buffer overrun statistics.
  tty: drop the pty lock during hangup
  cris: fix missing tty arg in wait_event_interruptible_tty call
  tty/amiserial: Add missing argument for tty_unlock()
  tty_lock: Localise the lock
  pty: Lock the devpts bits privately
  tty_lock: undo the old tty_lock use on the ctty
  serial8250-em: Emma Mobile UART driver V2
  Add missing call to uart_update_timeout()
  ...
2012-05-22 16:12:24 -07:00
David S. Miller c3719a1ef5 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John says:

--------------------
I apologize for not having sent this sooner.  FWIW, I was in a car
somewhere between Illinois and North Carolina for most of the day
Sunday and Monday... :-)

This is (obviously) the last non-fix pull request for wireless bits
intended for 3.5.  It includes AP support for mwifiex, a variety of HCI
and other updates for NFC, some brcmfmac and brcmsmac refactoring,
a large batch of ssb and bcma updates, a batch of ath6kl updates,
some cfg80211 and mac80211 updates/refactoring from Johannes Berg,
a rather large collection of Bluetooth updates by way of Gustavo,
and a variety of other bits here and there.
--------------------

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-22 16:07:23 -04:00
John W. Linville a0d0d1685f Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next 2012-05-22 15:18:06 -04:00
Sage Weil 6bd9adbdf9 libceph: fix pg_temp updates
Usually, we are adding pg_temp entries or removing them.  Occasionally they
update.  In that case, osdmap_apply_incremental() was failing because the
rbtree entry already exists.

Fix by removing the existing entry before inserting a new one.

Fixes http://tracker.newdream.net/issues/2446

Signed-off-by: Sage Weil <sage@inktank.com>
Reviewed-by: Alex Elder <elder@inktank.com>
2012-05-21 20:40:42 -07:00
Linus Torvalds cb60e3e65c Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security subsystem updates from James Morris:
 "New notable features:
   - The seccomp work from Will Drewry
   - PR_{GET,SET}_NO_NEW_PRIVS from Andy Lutomirski
   - Longer security labels for Smack from Casey Schaufler
   - Additional ptrace restriction modes for Yama by Kees Cook"

Fix up trivial context conflicts in arch/x86/Kconfig and include/linux/filter.h

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (65 commits)
  apparmor: fix long path failure due to disconnected path
  apparmor: fix profile lookup for unconfined
  ima: fix filename hint to reflect script interpreter name
  KEYS: Don't check for NULL key pointer in key_validate()
  Smack: allow for significantly longer Smack labels v4
  gfp flags for security_inode_alloc()?
  Smack: recursive tramsmute
  Yama: replace capable() with ns_capable()
  TOMOYO: Accept manager programs which do not start with / .
  KEYS: Add invalidation support
  KEYS: Do LRU discard in full keyrings
  KEYS: Permit in-place link replacement in keyring list
  KEYS: Perform RCU synchronisation on keys prior to key destruction
  KEYS: Announce key type (un)registration
  KEYS: Reorganise keys Makefile
  KEYS: Move the key config into security/keys/Kconfig
  KEYS: Use the compat keyctl() syscall wrapper on Sparc64 for Sparc32 compat
  Yama: remove an unused variable
  samples/seccomp: fix dependencies on arch macros
  Yama: add additional ptrace scopes
  ...
2012-05-21 20:27:36 -07:00
Linus Torvalds 99262a3daf Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999 BFCB D920 0E6C D1AD B8F1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPuv35AAoJENkgDmzRrbjxUx4P/0uc+0oNnZv11vYQsqHuhURa
 zMlsVdlXGVkvPqQiLY0QkrK5LcO6KiSnSk8vEnOYFIPjL4wNqL/4RRRLnTAJwmE+
 lsrL9DblI8Ira/EZRv7d2L12QrP+F2ZGKOZr67uVxSaxH71fUqtiJ0jqA/I8AYH7
 /V7+DgdIB1DD28Ya/JEFEUi41F08A6MU10hpaQWy9kXv09gCc9apgvH7/S3s9DaQ
 G640YWkoKZAx/OFBb8XFvpu9LqZcVl02Nl8goMZOKnMctC4iU3km7HeVjfwCgLjO
 AdA5spLMhDkS/xrpI0mSQ/wT0k0+sSYW5vEdW9N4XLZza0NgH9GfU4RtEuK85Slj
 7bPviZOcpjtt0sGi4wXCaVjZyHROX6tyRvTMUAIj3D0oJglb5T9D3MCvQnadILb0
 I0+7gk3d9rHqkO6CmjNaZG9IwR9NpFkbuolcFQuEaZoUMoKd2pYNQyxpbFGl+jCl
 7ViFHAy+fydNqDoETKincld4A43KWxOV7jyEJd7hloKcCixsqI7ZdPS7X8amec72
 a0hfNgMJzarZkTgo61Hair/d+vKGRJPgEdF1Yq76SDhYKD1TeWeDjmboctsiMjqe
 f5M4C6IdNJj9cDIlCxMk+3bX250oy7KG77v7Ux0/7nvtSWVa3yEMowD57hnn1But
 0gNC8bjXDHRsho90rDRN
 =Kj9v
 -----END PGP SIGNATURE-----

Merge tag 'virtio-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus

Pull virtio updates from Rusty Russell.

* tag 'virtio-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  virtio: fix typo in comment
  virtio-mmio: Devices parameter parsing
  virtio_blk: Drop unused request tracking list
  virtio-blk: Fix hot-unplug race in remove method
  virtio: Use ida to allocate virtio index
  virtio: balloon: separate out common code between remove and freeze functions
  virtio: balloon: drop restore_common()
  9p: disconnect channel when PCI device is removed
  virtio: update documentation to v0.9.5 of spec
2012-05-21 20:20:23 -07:00
Sasha Levin 991ad9ec39 9p: disconnect channel when PCI device is removed
When a virtio_9p pci device is being removed, we should close down any
active channels and free up resources, we're not supposed to BUG() if there's
still an open channel since it's a valid case when removing the PCI device.

Otherwise, removing the PCI device with an open channel would cause the
following BUG():

[ 1184.671416] ------------[ cut here ]------------
[ 1184.672057] kernel BUG at net/9p/trans_virtio.c:618!
[ 1184.672057] invalid opcode: 0000 [#1] PREEMPT SMP
[ 1184.672057] CPU 3
[ 1184.672057] Pid: 5, comm: kworker/u:0 Tainted: G        W    3.4.0-rc2-next-20120413-sasha-dirty #76
[ 1184.672057] RIP: 0010:[<ffffffff825c9116>]  [<ffffffff825c9116>] p9_virtio_remove+0x16/0x90
[ 1184.672057] RSP: 0018:ffff88000d653ac0  EFLAGS: 00010202
[ 1184.672057] RAX: ffffffff836bfb40 RBX: ffff88000c9b2148 RCX: ffff88000d658978
[ 1184.672057] RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff880028868000
[ 1184.672057] RBP: ffff88000d653ad0 R08: 0000000000000000 R09: 0000000000000000
[ 1184.672057] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880028868000
[ 1184.672057] R13: ffffffff835aa7c0 R14: ffff880041630000 R15: ffff88000d653da0
[ 1184.672057] FS:  0000000000000000(0000) GS:ffff880035a00000(0000) knlGS:0000000000000000
[ 1184.672057] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1184.672057] CR2: 0000000001181000 CR3: 000000000eba1000 CR4: 00000000000406e0
[ 1184.672057] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
x000000000117a190 *[ 1184.672057] DR3: 00000000000000**
00 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1184.672057] Process kworker/u:0 (pid: 5, threadinfo ffff88000d652000, task ffff88000d658000)
[ 1184.672057] Stack:
[ 1184.672057]  ffff880028868000 ffffffff836bfb40 ffff88000d653af0 ffffffff8193661b
[ 1184.672057]  ffff880028868008 ffffffff836bfb40 ffff88000d653b10 ffffffff81af1c81
[ 1184.672057]  ffff880028868068 ffff880028868008 ffff88000d653b30 ffffffff81af257a
[ 1184.795301] Call Trace:
[ 1184.795301]  [<ffffffff8193661b>] virtio_dev_remove+0x1b/0x60
[ 1184.795301]  [<ffffffff81af1c81>] __device_release_driver+0x81/0xd0
[ 1184.795301]  [<ffffffff81af257a>] device_release_driver+0x2a/0x40
[ 1184.795301]  [<ffffffff81af0d48>] bus_remove_device+0x138/0x150
[ 1184.795301]  [<ffffffff81aef08d>] device_del+0x14d/0x1b0
[ 1184.795301]  [<ffffffff81aef138>] device_unregister+0x48/0x60
[ 1184.795301]  [<ffffffff8193694d>] unregister_virtio_device+0xd/0x10
[ 1184.795301]  [<ffffffff8265fc74>] virtio_pci_remove+0x2a/0x6c
[ 1184.795301]  [<ffffffff818a95ad>] pci_device_remove+0x4d/0x110
[ 1184.795301]  [<ffffffff81af1c81>] __device_release_driver+0x81/0xd0
[ 1184.795301]  [<ffffffff81af257a>] device_release_driver+0x2a/0x40
[ 1184.795301]  [<ffffffff81af0d48>] bus_remove_device+0x138/0x150
[ 1184.795301]  [<ffffffff81aef08d>] device_del+0x14d/0x1b0
[ 1184.795301]  [<ffffffff81aef138>] device_unregister+0x48/0x60
[ 1184.795301]  [<ffffffff818a36fa>] pci_stop_bus_device+0x6a/0x90
[ 1184.795301]  [<ffffffff818a3791>] pci_stop_and_remove_bus_device+0x11/0x20
[ 1184.795301]  [<ffffffff818c21d9>] remove_callback+0x9/0x10
[ 1184.795301]  [<ffffffff81252d91>] sysfs_schedule_callback_work+0x21/0x60
[ 1184.795301]  [<ffffffff810cb1a1>] process_one_work+0x281/0x430
[ 1184.795301]  [<ffffffff810cb140>] ? process_one_work+0x220/0x430
[ 1184.795301]  [<ffffffff81252d70>] ? sysfs_read_file+0x1c0/0x1c0
[ 1184.795301]  [<ffffffff810cc613>] worker_thread+0x1f3/0x320
[ 1184.795301]  [<ffffffff810cc420>] ? manage_workers.clone.13+0x130/0x130
[ 1184.795301]  [<ffffffff810d30b2>] kthread+0xb2/0xc0
[ 1184.795301]  [<ffffffff826783f4>] kernel_thread_helper+0x4/0x10
[ 1184.795301]  [<ffffffff810deb18>] ? finish_task_switch+0x78/0xf0
[ 1184.795301]  [<ffffffff82676574>] ? retint_restore_args+0x13/0x13
[ 1184.795301]  [<ffffffff810d3000>] ? kthread_flush_work_fn+0x10/0x10
[ 1184.795301]  [<ffffffff826783f0>] ? gs_change+0x13/0x13
[ 1184.795301] Code: c1 9e 0a 00 48 83 c4 08 5b c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 54 49 89 fc 53 48 8b 9f a8 04 00 00 80 3b 00 74 0a <0f> 0b 0f 1f 84 00 00 00 00 00 48 8b 87 88 04 00 00 ff 50 30 31
[ 1184.795301] RIP  [<ffffffff825c9116>] p9_virtio_remove+0x16/0x90
[ 1184.795301]  RSP <ffff88000d653ac0>
[ 1184.952618] ---[ end trace a307b3ed40206b4c ]---

Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-22 12:16:10 +09:30
James Morris ff2bb047c4 Merge branch 'master' of git://git.infradead.org/users/eparis/selinux into next
Per pull request, for 3.5.
2012-05-22 11:21:06 +10:00
Sam Ravnborg e47b65b032 net: drop NET dependency from HAVE_BPF_JIT
There is no point having the NET dependency on the select target, as it
forces all users to depend on NET to tell they support BPF_JIT.  Move
the config option to the bottom of the file - this could be a nice place
also for future "selectable" config symbols.

Fix up all users to drop the dependency on NET now that it is not
required to supress warnings for non-NET builds.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-21 12:50:12 -07:00
Linus Torvalds cb62ab71fe Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David Miller:

 1) Get rid of the error prone NLA_PUT*() macros that used an embedded
    goto.

 2) Kill off the token-ring and MCA networking drivers, from Paul
    Gortmaker.

 3) Reduce high-order allocations made by datagram AF_UNIX sockets, from
    Eric Dumazet.

 4) Add PTP hardware clock support to IGB and IXGBE, from Richard
    Cochran and Jacob Keller.

 5) Allow users to query timestamping capabilities of a card via
    ethtool, from Richard Cochran.

 6) Add loadbalance mode to the teaming driver, from Jiri Pirko.  Part
    of this is that we can now have BPF filters not attached to sockets,
    and the loadbalancing function is calculated using one.

 7) Francois Romieu went through the network drivers removing gratuitous
    uses of netdev->base_addr, perhaps some day we can remove it
    completely but it's used for ISA probing still.

 8) Add a BPF JIT for sparc.  I know, who cares, right? :-)

 9) Move networking sysctl registry away from using the compatability
    mode interfaces in the sysctl code.  From Eric W Biederman.

10) Pavel Emelyanov added a way to save and restore TCP socket state via
    TCP_REPAIR, TCP_REPAIR_QUEUE, and TCP_QUEUE_SEQ socket options as
    well as a way to forcefully bind a socket to a port via the
    sk->sk_reuse value SK_FORCE_REUSE.  There is also a
    TCP_REPAIR_OPTIONS which allows to reinstante the TCP options
    enabled on the connection.

11) Several enhancements from Eric Dumazet that, in particular, can
    enhance splice performance on TCP sockets significantly.

     a) Reset the offset of the per-socket sendmsg page when we know
        we're the only use of the page in linear_to_page().

     b) Add facilities such that skb->data can be backed a page rather
        than SLAB kmalloc'd memory.  In particular devices which were
        receiving into linear RX buffers can now end up providing paged
        data.

    The big result is that code like splice and GRO do not have to copy
    any more.

12) Allow a pure sender to more gracefully handle ACK backlogs in TCP.
    What can happen at high rates is that the sender hasn't grown his
    receive buffer limits at all (he's not receiving data so really
    doesn't need to), but the non-data ACKs consume receive buffer
    space.

    sk_add_backlog() is too aggressive in dropping frames in this case,
    so relax it's requirements by using the receive buffer plus the send
    buffer limit as the backlog limit instead of just the former.

    Also from Eric Dumazet.

13) Add ipv6 support to L2TP, from Benjamin LaHaise, James Chapman, and
    Chris Elston.

14) Implement TCP early retransmit (RFC 5827), from Yuchung Cheng.
    Basically, we can start fast retransmit before hiting the dupack
    threshold under certain conditions.

15) New CODEL active queue management packet scheduler, from Eric
    Dumazet based upon initial work by Dave Taht.

    Basically, the big feature is that packets are dropped (or ECN bits
    are set) based upon how long packets live in the queue, rather than
    the queue length (which is what RED uses).

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1341 commits)
  drivers/net/stmmac: seq_file fix memory leak
  ipv6/exthdrs: strict Pad1 and PadN check
  USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z
  USB: qmi_wwan: Add ZTE (Vodafone) K3765-Z
  USB: qmi_wwan: Make forced int 4 whitelist generic
  net/ipv4: replace simple_strtoul with kstrtoul
  net/ipv4/ipconfig: neaten __setup placement
  net: qmi_wwan: Add Vodafone/Huawei K5005 support
  net: cdc_ether: Add ZTE WWAN matches before generic Ethernet
  ipv6: use skb coalescing in reassembly
  ipv4: use skb coalescing in defragmentation
  net: introduce skb_try_coalesce()
  net:ipv6:fixed space issues relating to operators.
  net:ipv6:fixed a trailing white space issue.
  ipv6: disable GSO on sockets hitting dst_allfrag
  tg3: use netdev_alloc_frag() API
  net: napi_frags_skb() is static
  ppp: avoid false drop_monitor false positives
  ipv6: bool/const conversions phase2
  ipx: Remove spurious NULL checking in ipx_ioctl().
  ...
2012-05-21 10:03:46 -07:00