io_ring_exit_work() have to cancel all requests, including those staying
in io-wq, however it tries only cancellation of current tctx, which is
NULL. If we've got task==NULL, use the ctx-to-tctx map to go over all
tctx/io-wq and try cancellations on them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use system_unbound_wq to run io_ring_exit_work(), so it's hard to
monitor whether removal hang or not. Add WARN_ONCE to catch hangs.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't use task file notes anymore, and no need left in indexing
task->io_uring->xa by file, and replace it with ctx. It's better
design-wise, especially since we keep a dangling file, and so have to
keep an eye on not dereferencing it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With ->flush() gone we're now leaving all uring file notes until the
task dies/execs, so the ctx will not be freed until all tasks that have
ever submit a request die. It was nicer with flush but not much, we
could have locked as described ctx in many cases.
Now we guarantee that ctx outlives all tctx in a sense that
io_ring_exit_work() waits for all tctxs to drop their corresponding
enties in ->xa, and ctx won't go away until then. Hence, additional
io_uring file reference (a.k.a. task file notes) are not needed anymore.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Another preparation patch. When full quiesce is done on ctx exit, use
task_work infra to remove corresponding to the ctx io_uring->xa entries.
For that we use the back tctx map. Also use ->in_idle to prevent
removing it while we traversing ->xa on cancellation, just ignore it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For each pair tcxt-ctx create an object and chain it into ctx, so we
have a way to traverse all tctx that are using current ctx. Preparation
patch, will be used later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rework io_uring_del_task_file(), so it accepts an index to delete, and
it's not necessarily have to be in the ->xa. Infer file from xa_erase()
to maintain a single origin of truth.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds code to function trans_drain to remove drained
bd elements from the ail lists, if queued, before freeing the bd.
If we don't remove the bd from the ail, function ail_drain will
try to reference the bd after it has been freed by trans_drain.
Thanks to Andy Price for his analysis of the problem.
Reported-by: Andy Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
It fixes the following warning detected by coccinelle:
./fs/gfs2/super.c:592:5-10: Unneeded variable: "error". Return "0" on
line 628
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The typical result of the backwards comparison here is that the source
server in a server-to-server copy will return BAD_STATEID within a few
seconds of the copy starting, instead of giving the copy a full lease
period, so the copy_file_range() call will end up unnecessarily
returning a short read.
Fixes: 624322f1ad "NFSD add COPY_NOTIFY operation"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
When NFSD_V4 is enabled and CRYPTO is disabled,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for CRYPTO_SHA256
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- NFSD_V4 [=y] && NETWORK_FILESYSTEMS [=y] && NFSD [=y] && PROC_FS [=y]
WARNING: unmet direct dependencies detected for CRYPTO_MD5
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- NFSD_V4 [=y] && NETWORK_FILESYSTEMS [=y] && NFSD [=y] && PROC_FS [=y]
This is because NFSD_V4 selects CRYPTO_MD5 and CRYPTO_SHA256,
without depending on or selecting CRYPTO, despite those config options
being subordinate to CRYPTO.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If a file is unhashed, then we're going to reject it anyway and retry,
so make sure we skip it when we're doing the RCU lockless lookup.
This avoids a number of unnecessary nfserr_jukebox returns from
nfsd_file_acquire()
Fixes: 65294c1f2c ("nfsd: add a new struct file caching facility to nfsd")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If we go async with a request, grab the creds that the task currently has
assigned and make sure that the async side switches to them. This is
handled in the same way that we do for registered personalities.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ran into a use-after-free on the main io-wq struct, wq. It has a worker
ref and completion event, but the manager itself isn't holding a
reference. This can lead to a race where the manager thinks there are
no workers and exits, but a worker is being added. That leads to the
following trace:
BUG: KASAN: use-after-free in io_wqe_worker+0x4c0/0x5e0
Read of size 8 at addr ffff888108baa8a0 by task iou-wrk-3080422/3080425
CPU: 5 PID: 3080425 Comm: iou-wrk-3080422 Not tainted 5.12.0-rc1+ #110
Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO 10G (MS-7C60), BIOS 1.60 05/13/2020
Call Trace:
dump_stack+0x90/0xbe
print_address_description.constprop.0+0x67/0x28d
? io_wqe_worker+0x4c0/0x5e0
kasan_report.cold+0x7b/0xd4
? io_wqe_worker+0x4c0/0x5e0
__asan_load8+0x6d/0xa0
io_wqe_worker+0x4c0/0x5e0
? io_worker_handle_work+0xc00/0xc00
? recalc_sigpending+0xe5/0x120
? io_worker_handle_work+0xc00/0xc00
? io_worker_handle_work+0xc00/0xc00
ret_from_fork+0x1f/0x30
Allocated by task 3080422:
kasan_save_stack+0x23/0x60
__kasan_kmalloc+0x80/0xa0
kmem_cache_alloc_node_trace+0xa0/0x480
io_wq_create+0x3b5/0x600
io_uring_alloc_task_context+0x13c/0x380
io_uring_add_task_file+0x109/0x140
__x64_sys_io_uring_enter+0x45f/0x660
do_syscall_64+0x32/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 3080422:
kasan_save_stack+0x23/0x60
kasan_set_track+0x20/0x40
kasan_set_free_info+0x24/0x40
__kasan_slab_free+0xe8/0x120
kfree+0xa8/0x400
io_wq_put+0x14a/0x220
io_wq_put_and_exit+0x9a/0xc0
io_uring_clean_tctx+0x101/0x140
__io_uring_files_cancel+0x36e/0x3c0
do_exit+0x169/0x1340
__x64_sys_exit+0x34/0x40
do_syscall_64+0x32/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Have the manager itself hold a reference, and now both drop points drop
and complete if we hit zero, and the manager can unconditionally do a
wait_for_completion() instead of having a race between reading the ref
count and waiting if it was non-zero.
Fixes: fb3a1f6c74 ("io-wq: have manager wait for all workers to exit")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When doing a large read or write workload we only
very gradually increase the number of credits
which can cause problems with parallelizing large i/o
(I/O ramps up more slowly than it should for large
read/write workloads) especially with multichannel
when the number of credits on the secondary channels
starts out low (e.g. less than about 130) or when
recovering after server throttled back the number
of credit.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With multichannel, operations like the queries
from "ls -lR" can cause all credits to be used and
errors to be returned since max_credits was not
being set correctly on the secondary channels and
thus the client was requesting 0 credits incorrectly
in some cases (which can lead to not having
enough credits to perform any operation on that
channel).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
syzbot found UBSAN: shift-out-of-bounds in ext4_mb_init [1], when
1 << sbi->s_es->s_log_groups_per_flex is bigger than UINT_MAX,
where sbi->s_mb_prefetch is unsigned integer type.
32 is the maximum allowed power of s_log_groups_per_flex. Following if
check will also trigger UBSAN shift-out-of-bound:
if (1 << sbi->s_es->s_log_groups_per_flex >= UINT_MAX) {
So I'm checking it against the raw number, perhaps there is another way
to calculate UINT_MAX max power. Also use min_t as to make sure it's
uint type.
[1] UBSAN: shift-out-of-bounds in fs/ext4/mballoc.c:2713:24
shift exponent 60 is too large for 32-bit type 'int'
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x137/0x1be lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
ext4_mb_init_backend fs/ext4/mballoc.c:2713 [inline]
ext4_mb_init+0x19bc/0x19f0 fs/ext4/mballoc.c:2898
ext4_fill_super+0xc2ec/0xfbe0 fs/ext4/super.c:4983
Reported-by: syzbot+a8b4b0c60155e87e9484@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210224095800.3350002-1-snovitoll@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Syzbot is reporting that ext4 can enter fs reclaim from kvmalloc() while
the transaction is started like:
fs_reclaim_acquire+0x117/0x150 mm/page_alloc.c:4340
might_alloc include/linux/sched/mm.h:193 [inline]
slab_pre_alloc_hook mm/slab.h:493 [inline]
slab_alloc_node mm/slub.c:2817 [inline]
__kmalloc_node+0x5f/0x430 mm/slub.c:4015
kmalloc_node include/linux/slab.h:575 [inline]
kvmalloc_node+0x61/0xf0 mm/util.c:587
kvmalloc include/linux/mm.h:781 [inline]
ext4_xattr_inode_cache_find fs/ext4/xattr.c:1465 [inline]
ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1508 [inline]
ext4_xattr_set_entry+0x1ce6/0x3780 fs/ext4/xattr.c:1649
ext4_xattr_ibody_set+0x78/0x2b0 fs/ext4/xattr.c:2224
ext4_xattr_set_handle+0x8f4/0x13e0 fs/ext4/xattr.c:2380
ext4_xattr_set+0x13a/0x340 fs/ext4/xattr.c:2493
This should be impossible since transaction start sets PF_MEMALLOC_NOFS.
Add some assertions to the code to catch if something isn't working as
expected early.
Link: https://lore.kernel.org/linux-ext4/000000000000563a0205bafb7970@google.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210222171626.21884-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When generic/371 is run on kvm-xfstests using 5.10 and 5.11 kernels, it
fails at significant rates on the two test scenarios that disable
delayed allocation (ext3conv and data_journal) and force actual block
allocation for the fallocate and pwrite functions in the test. The
failure rate on 5.10 for both ext3conv and data_journal on one test
system typically runs about 85%. On 5.11, the failure rate on ext3conv
sometimes drops to as low as 1% while the rate on data_journal
increases to nearly 100%.
The observed failures are largely due to ext4_should_retry_alloc()
cutting off block allocation retries when s_mb_free_pending (used to
indicate that a transaction in progress will free blocks) is 0.
However, free space is usually available when this occurs during runs
of generic/371. It appears that a thread attempting to allocate
blocks is just missing transaction commits in other threads that
increase the free cluster count and reset s_mb_free_pending while
the allocating thread isn't running. Explicitly testing for free space
availability avoids this race.
The current code uses a post-increment operator in the conditional
expression that determines whether the retry limit has been exceeded.
This means that the conditional expression uses the value of the
retry counter before it's increased, resulting in an extra retry cycle.
The current code actually retries twice before hitting its retry limit
rather than once.
Increasing the retry limit to 3 from the current actual maximum retry
count of 2 in combination with the change described above reduces the
observed failure rate to less that 0.1% on both ext3conv and
data_journal with what should be limited impact on users sensitive to
the overhead caused by retries.
A per filesystem percpu counter exported via sysfs is added to allow
users or developers to track the number of times the retry limit is
exceeded without resorting to debugging methods. This should provide
some insight into worst case retry behavior.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20210218151132.19678-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
-----BEGIN PGP SIGNATURE-----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=w0Sf
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A bit of a mix between fallout from the worker change, cleanups and
reductions now possible from that change, and fixes in general. In
detail:
- Fully serialize manager and worker creation, fixing races due to
that.
- Clean up some naming that had gone stale.
- SQPOLL fixes.
- Fix race condition around task_work rework that went into this
merge window.
- Implement unshare. Used for when the original task does unshare(2)
or setuid/seteuid and friends, drops the original workers and forks
new ones.
- Drop the only remaining piece of state shuffling we had left, which
was cred. Move it into issue instead, and we can drop all of that
code too.
- Kill f_op->flush() usage. That was such a nasty hack that we had
out of necessity, we no longer need it.
- Following from ->flush() removal, we can also drop various bits of
ctx state related to SQPOLL and cancelations.
- Fix an issue with IOPOLL retry, which originally was fallout from a
filemap change (removing iov_iter_revert()), but uncovered an issue
with iovec re-import too late.
- Fix an issue with system suspend.
- Use xchg() for fallback work, instead of cmpxchg().
- Properly destroy io-wq on exec.
- Add create_io_thread() core helper, and use that in io-wq and
io_uring. This allows us to remove various silly completion events
related to thread setup.
- A few error handling fixes.
This should be the grunt of fixes necessary for the new workers, next
week should be quieter. We've got a pending series from Pavel on
cancelations, and how tasks and rings are indexed. Outside of that,
should just be minor fixes. Even with these fixes, we're still killing
a net ~80 lines"
* tag 'io_uring-5.12-2021-03-05' of git://git.kernel.dk/linux-block: (41 commits)
io_uring: don't restrict issue_flags for io_openat
io_uring: make SQPOLL thread parking saner
io-wq: kill hashed waitqueue before manager exits
io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
io_uring: don't keep looping for more events if we can't flush overflow
io_uring: move to using create_io_thread()
kernel: provide create_io_thread() helper
io_uring: reliably cancel linked timeouts
io_uring: cancel-match based on flags
io-wq: ensure all pending work is canceled on exit
io_uring: ensure that threads freeze on suspend
io_uring: remove extra in_idle wake up
io_uring: inline __io_queue_async_work()
io_uring: inline io_req_clean_work()
io_uring: choose right tctx->io_wq for try cancel
io_uring: fix -EAGAIN retry with IOPOLL
io-wq: fix error path leak of buffered write hash map
io_uring: remove sqo_task
io_uring: kill sqo_dead and sqo submission halting
io_uring: ignore double poll add on the same waitqueue head
...
-----BEGIN PGP SIGNATURE-----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=tlU3
-----END PGP SIGNATURE-----
Merge tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"More regression fixes and stabilization.
Regressions:
- zoned mode
- count zone sizes in wider int types
- fix space accounting for read-only block groups
- subpage: fix page tail zeroing
Fixes:
- fix spurious warning when remounting with free space tree
- fix warning when creating a directory with smack enabled
- ioctl checks for qgroup inheritance when creating a snapshot
- qgroup
- fix missing unlock on error path in zero range
- fix amount of released reservation on error
- fix flushing from unsafe context with open transaction,
potentially deadlocking
- minor build warning fixes"
* tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: do not account freed region of read-only block group as zone_unusable
btrfs: zoned: use sector_t for zone sectors
btrfs: subpage: fix the false data csum mismatch error
btrfs: fix warning when creating a directory with smack enabled
btrfs: don't flush from btrfs_delayed_inode_reserve_metadata
btrfs: export and rename qgroup_reserve_meta
btrfs: free correct amount of space in btrfs_delayed_inode_reserve_metadata
btrfs: fix spurious free_space_tree remount warning
btrfs: validate qgroup inherit for SNAP_CREATE_V2 ioctl
btrfs: unlock extents in btrfs_zero_range in case of quota reservation errors
btrfs: ref-verify: use 'inline void' keyword ordering
Commit 384d87ef2c ("block: Do not discard buffers under a mounted
filesystem") made paths issuing discard or zeroout requests to the
underlying device try to grab block device in exclusive mode. If that
failed we returned EBUSY to userspace. This however caused unexpected
fallout in userspace where e.g. FUSE filesystems issue discard requests
from userspace daemons although the device is open exclusively by the
kernel. Also shrinking of logical volume by LVM issues discard requests
to a device which may be claimed exclusively because there's another LV
on the same PV. So to avoid these userspace regressions, fall back to
invalidate_inode_pages2_range() instead of returning EBUSY to userspace
and return EBUSY only of that call fails as well (meaning that there's
indeed someone using the particular device range we are trying to
discard).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211167
Fixes: 384d87ef2c ("block: Do not discard buffers under a mounted filesystem")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
45d189c606 ("io_uring: replace force_nonblock with flags") did
something strange for io_openat() slicing all issue_flags but
IO_URING_F_NONBLOCK. Not a bug for now, but better to just forward the
flags.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We have this weird true/false return from parking, and then some of the
callers decide to look at that. It can lead to unbalanced parks and
sqd locking. Have the callers check the thread status once it's parked.
We know we have the lock at that point, so it's either valid or it's NULL.
Fix race with parking on thread exit. We need to be careful here with
ordering of the sdq->lock and the IO_SQ_THREAD_SHOULD_PARK bit.
Rename sqd->completion to sqd->parked to reflect that this is the only
thing this completion event doesn.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we race with shutting down the io-wq context and someone queueing
a hashed entry, then we can exit the manager with it armed. If it then
triggers after the manager has exited, we can have a use-after-free where
io_wqe_hash_wake() attempts to wake a now gone manager process.
Move the killing of the hashed write queue into the manager itself, so
that we know we've killed it before the task exits.
Fixes: e941894eae ("io-wq: make buffered file write hashed work map per-ctx")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The callback can only be armed, if we get -EIOCBQUEUED returned. It's
important that we clear the WAITQ bit for other cases, otherwise we can
queue for async retry and filemap will assume that we're armed and
return -EAGAIN instead of just blocking for the IO.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It doesn't make sense to wait for more events to come in, if we can't
even flush the overflow we already have to the ring. Return -EBUSY for
that condition, just like we do for attempts to submit with overflow
pending.
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This allows us to do task creation and setup without needing to use
completions to try and synchronize with the starting thread. Get rid of
the old io_wq_fork_thread() wrapper, and the 'wq' and 'worker' startup
completion events - we can now do setup before the task is running.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Right now "mount -t virtiofs -o dax myfs /mnt/virtiofs" succeeds even
if filesystem deivce does not have a cache window and hence DAX can't
be supported.
This gives a false sense to user that they are using DAX with virtiofs
but fact of the matter is that they are not.
Fix this by returning error if dax can't be supported and user has asked
for it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Linked timeouts are fired asynchronously (i.e. soft-irq), and use
generic cancellation paths to do its stuff, including poking into io-wq.
The problem is that it's racy to access tctx->io_wq, as
io_uring_task_cancel() and others may be happening at this exact moment.
Mark linked timeouts with REQ_F_INLIFGHT for now, making sure there are
no timeouts before io-wq destraction.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of going into request internals, like checking req->file->f_op,
do match them based on REQ_F_INFLIGHT, it's set only when we want it to
be reliably cancelled.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We migrate zone unusable bytes to read-only bytes when a block group is
set to read-only, and account all the free region as bytes_readonly.
Thus, we should not increase block_group->zone_unusable when the block
group is read-only.
Fixes: 169e0da91a ("btrfs: zoned: track unusable bytes for zones")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We need to use sector_t for zone_sectors, or it would set the zone size
to zero when the size >= 4GB (= 2^24 sectors) by shifting the
zone_sectors value by SECTOR_SHIFT. We're assuming zones sizes up to
8GiB.
Fixes: 5b31646898 ("btrfs: get zone information of zoned block devices")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we race on shutting down the io-wq, then we should ensure that any
work that was queued after workers shutdown is canceled. Harden the
add work check a bit too, checking for IO_WQ_BIT_EXIT and cancel if
it's set.
Add a WARN_ON() for having any work before we kill the io-wq context.
Reported-by: syzbot+91b4b56ead187d35c9d3@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_dismantle_req() is always followed by io_put_task(), which already do
proper in_idle wake ups, so we can skip waking the owner task in
io_dismantle_req(). The rules are simpler now, do io_put_task() shortly
after ending a request, and it will be fine.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__io_queue_async_work() is only called from io_queue_async_work(),
inline it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Inline io_req_clean_work(), less code and easier to analyse
tctx dependencies and refs usage.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we cancel SQPOLL, @task in io_uring_try_cancel_requests() will
differ from current. Use the right tctx from passed in @task, and don't
forget that it can be NULL when the io_uring ctx exits.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We no longer revert the iovec on -EIOCBQUEUED, see commit ab2125df92,
and this started causing issues for IOPOLL on devies that run out of
request slots. Turns out what outside of needing a revert for those, we
also had a bug where we didn't properly setup retry inside the submission
path. That could cause re-import of the iovec, if any, and that could lead
to spurious results if the application had those allocated on the stack.
Catch -EAGAIN retry and make the iovec stable for IOPOLL, just like we do
for !IOPOLL retries.
Cc: <stable@vger.kernel.org> # 5.9+
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reported-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'err' path should include the hash put, we already grabbed a reference
once we get that far.
Fixes: e941894eae ("io-wq: make buffered file write hashed work map per-ctx")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now, sqo_task is used only for a warning that is not interesting anymore
since sqo_dead is gone, remove all of that including ctx->sqo_task.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As SQPOLL task doesn't poke into ->sqo_task anymore, there is no need to
kill the sqo when the master task exits. Before it was necessary to
avoid races accessing sqo_task->files with removing them.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: don't forget to enable SQPOLL before exit, if started disabled]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we create it in a disabled state because IORING_SETUP_R_DISABLED is
set on ring creation, we need to ensure that we've kicked the thread if
we're exiting before it's been explicitly disabled. Otherwise we can run
into a deadlock where exit is waiting go park the SQPOLL thread, but the
SQPOLL thread itself is waiting to get a signal to start.
That results in the below trace of both tasks hung, waiting on each other:
INFO: task syz-executor458:8401 blocked for more than 143 seconds.
Not tainted 5.11.0-next-20210226-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor458 state:D stack:27536 pid: 8401 ppid: 8400 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4324 [inline]
__schedule+0x90c/0x21a0 kernel/sched/core.c:5075
schedule+0xcf/0x270 kernel/sched/core.c:5154
schedule_timeout+0x1db/0x250 kernel/time/timer.c:1868
do_wait_for_common kernel/sched/completion.c:85 [inline]
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion+0x168/0x270 kernel/sched/completion.c:138
io_sq_thread_park fs/io_uring.c:7115 [inline]
io_sq_thread_park+0xd5/0x130 fs/io_uring.c:7103
io_uring_cancel_task_requests+0x24c/0xd90 fs/io_uring.c:8745
__io_uring_files_cancel+0x110/0x230 fs/io_uring.c:8840
io_uring_files_cancel include/linux/io_uring.h:47 [inline]
do_exit+0x299/0x2a60 kernel/exit.c:780
do_group_exit+0x125/0x310 kernel/exit.c:922
__do_sys_exit_group kernel/exit.c:933 [inline]
__se_sys_exit_group kernel/exit.c:931 [inline]
__x64_sys_exit_group+0x3a/0x50 kernel/exit.c:931
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x43e899
RSP: 002b:00007ffe89376d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00000000004af2f0 RCX: 000000000043e899
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffffffffffc0 R09: 0000000010000000
R10: 0000000000008011 R11: 0000000000000246 R12: 00000000004af2f0
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001
INFO: task iou-sqp-8401:8402 can't die for more than 143 seconds.
task:iou-sqp-8401 state:D stack:30272 pid: 8402 ppid: 8400 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4324 [inline]
__schedule+0x90c/0x21a0 kernel/sched/core.c:5075
schedule+0xcf/0x270 kernel/sched/core.c:5154
schedule_timeout+0x1db/0x250 kernel/time/timer.c:1868
do_wait_for_common kernel/sched/completion.c:85 [inline]
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion+0x168/0x270 kernel/sched/completion.c:138
io_sq_thread+0x27d/0x1ae0 fs/io_uring.c:6717
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
INFO: task iou-sqp-8401:8402 blocked for more than 143 seconds.
Reported-by: syzbot+fb5458330b4442f2090d@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_run_ctx_fallback() can use xchg() instead of cmpxchg(). It's simpler
and faster.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is an unlikely but possible race using a freed context. That's
because req->task_work.func() can free a request, but we won't
necessarily find a completion in submit_state.comp and so all ctx refs
may be put by the time we do mutex_lock(&ctx->uring_ctx);
There are several reasons why it can miss going through
submit_state.comp: 1) req->task_work.func() didn't complete it itself,
but punted to iowq (e.g. reissue) and it got freed later, or a similar
situation with it overflowing and getting flushed by someone else, or
being submitted to IRQ completion, 2) As we don't hold the uring_lock,
someone else can do io_submit_flush_completions() and put our ref.
3) Bugs and code obscurities, e.g. failing to propagate issue_flags
properly.
One example is as follows
CPU1 | CPU2
=======================================================================
@req->task_work.func() |
-> @req overflwed, |
so submit_state.comp,nr==0 |
| flush overflows, and free @req
| ctx refs == 0, free it
ctx is dead, but we do |
lock + flush + unlock |
So take a ctx reference for each new ctx we see in __tctx_task_work(),
and do release it until we do all our flushing.
Fixes: 65453d1efb ("io_uring: enable req cache for task_work items")
Reported-by: syzbot+a157ac7c03a56397f553@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: fold in my one-liner and fix ref mismatch]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We already run the fallback task_work in io_uring_try_cancel_requests(),
no need to duplicate at ring exit explicitly.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we move it in there, then we no longer have to care about it in io-wq.
This means we can drop the cred handling in io-wq, and we can drop the
REQ_F_WORK_INITIALIZED flag and async init functions as that was the last
user of it since we moved to the new workers. Then we can also drop
io_wq_work->creds, and just hold the personality u16 in there instead.
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're no longer checking anything that requires the work item to be
initialized, as we're not carrying any file related state there.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Destroy current's io-wq backend and tctx on __io_uring_task_cancel(),
aka exec(). Looks it's not strictly necessary, because it will be done
at some point when the task dies and changes of creds/files/etc. are
handled, but better to do that earlier to free io-wq and not potentially
lock previous mm and other resources for the time being.
It's safe to do because we wait for all requests of the current task to
complete, so no request will use tctx afterwards. Note, that
io_uring_files_cancel() may leave some requests for later reaping, so it
leaves tctx intact, that's ok as the task is dying anyway.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Make sure that we killed an io-wq by the time a task is dead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We clear the bit marking the ctx task_work as active after having run
the queued work, but we really should be clearing it before. Otherwise
we can hit a tiny race ala:
CPU0 CPU1
io_task_work_add() tctx_task_work()
run_work
add_to_list
test_and_set_bit
clear_bit
already set
and CPU0 will return thinking the task_work is queued, while in reality
it's already being run. If we hit the condition after __tctx_task_work()
found no more work, but before we've cleared the bit, then we'll end up
thinking it's queued and will be run. In reality it is queued, but we
didn't queue the ctx task_work to ensure that it gets run.
Fixes: 7cbf1722d5 ("io_uring: provide FIFO ordering for task_work")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we put the io-wq from io_uring, we really want it to exit. Provide
a helper that does that for us. Couple that with not having the manager
hold a reference to the 'wq' and the normal SQPOLL exit will tear down
the io-wq context appropriate.
On the io-wq side, our wq context is per task, so only the task itself
is manipulating ->manager and hence it's safe to check and clear without
any extra locking. We just need to ensure that the manager task stays
around, in case it exits.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We want to reuse this completion, and a single complete should do just
fine. Ensure that we park ourselves first if requested, as that is what
lead to the initial deadlock in this area. If we've got someone attempting
to park us, then we can't proceed without having them finish first.
Fixes: 37d1e2e364 ("io_uring: move SQPOLL thread io-wq forked worker")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_try_cancel_requests() matches not only current's requests, but
also of other exiting tasks, so we need to actively cancel them and not
just wait, especially since the function can be called on flush during
do_exit() -> exit_files().
Even if it's not a problem for now, it's much nicer to know that the
function tries to cancel everything it can.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we fail to fork an SQPOLL worker, we can hit cancel, and hence
attempted thread stop, with the thread already being stopped. Ensure
we check for that.
Also guard thread stop fully by the sqd mutex, just like we do for
park.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We are already freeing the wq struct in both spots, so don't put it and
get it freed twice.
Reported-by: syzbot+7bf785eedca35ca05501@syzkaller.appspotmail.com
Fixes: 4fb6ac3262 ("io-wq: improve manager/worker handling over exec")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The manager waits for the workers, hence the manager is always valid if
workers are running. Now also have wq destroy wait for the manager on
exit, so we now everything is gone.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a leftover from a different use cases, it's used to wait for
the manager to startup. Rename it as such.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we're in the process of shutting down the async context, then don't
create new workers if we already have at least the fixed one.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of having to wait separately on workers and manager, just have
the manager wait on the workers. We use an atomic_t for the reference
here, as we need to start at 0 and allow increment from that. Since the
number of workers is naturally capped by the allowed nr of processes,
and that uses an int, there is no risk of overflow.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a quite huge "uncorrectable error in header" flood in KMSG
on a clean system boot since there is no pstore buffer saved in RAM.
Let's silence the redundant noisy messages by rate-limiting the printk
message. Now there are maximum 10 messages printed repeatedly instead
of 35+.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210302095850.30894-1-digetx@gmail.com
[BUG]
When running fstresss, we can hit strange data csum mismatch where the
on-disk data is in fact correct (passes scrub).
With some extra debug info added, we have the following traces:
0482us: btrfs_do_readpage: root=5 ino=284 offset=393216, submit force=0 pgoff=0 iosize=8192
0494us: btrfs_do_readpage: root=5 ino=284 offset=401408, submit force=0 pgoff=8192 iosize=4096
0498us: btrfs_submit_data_bio: root=5 ino=284 bio first bvec=393216 len=8192
0591us: btrfs_do_readpage: root=5 ino=284 offset=405504, submit force=0 pgoff=12288 iosize=36864
0594us: btrfs_submit_data_bio: root=5 ino=284 bio first bvec=401408 len=4096
0863us: btrfs_submit_data_bio: root=5 ino=284 bio first bvec=405504 len=36864
0933us: btrfs_verify_data_csum: root=5 ino=284 offset=393216 len=8192
0967us: btrfs_do_readpage: root=5 ino=284 offset=442368, skip beyond isize pgoff=49152 iosize=16384
1047us: btrfs_verify_data_csum: root=5 ino=284 offset=401408 len=4096
1163us: btrfs_verify_data_csum: root=5 ino=284 offset=405504 len=36864
1290us: check_data_csum: !!! root=5 ino=284 offset=438272 pg_off=45056 !!!
7387us: end_bio_extent_readpage: root=5 ino=284 before pending_read_bios=0
[CAUSE]
Normally we expect all submitted bio reads to only touch the range we
specified, and under subpage context, it means we should only touch the
range specified in each bvec.
But in data read path, inside end_bio_extent_readpage(), we have page
zeroing which only takes regular page size into consideration.
This means for subpage if we have an inode whose content looks like below:
0 16K 32K 48K 64K
|///////| |///////| |
|//| = data needs to be read from disk
| | = hole
And i_size is 64K initially.
Then the following race can happen:
T1 | T2
--------------------------------+--------------------------------
btrfs_do_readpage() |
|- isize = 64K; |
| At this time, the isize is |
| 64K |
| |
|- submit_extent_page() |
| submit previous assembled bio|
| assemble bio for [0, 16K) |
| |
|- submit_extent_page() |
submit read bio for [0, 16K) |
assemble read bio for |
[32K, 48K) |
|
| btrfs_setsize()
| |- i_size_write(, 16K);
| Now i_size is only 16K
end_io() for [0K, 16K) |
|- end_bio_extent_readpage() |
|- btrfs_verify_data_csum() |
| No csum error |
|- i_size = 16K; |
|- zero_user_segment(16K, |
PAGE_SIZE); |
!!! We zeroed range |
!!! [32K, 48K) |
| end_io for [32K, 48K)
| |- end_bio_extent_readpage()
| |- btrfs_verify_data_csum()
| ! CSUM MISMATCH !
| ! As the range is zeroed now !
[FIX]
To fix the problem, make end_bio_extent_readpage() to only zero the
range of bvec.
The bug only affects subpage read-write support, as for full read-only
mount we can't change i_size thus won't hit the race condition.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we have smack enabled, during the creation of a directory smack may
attempt to add a "smack transmute" xattr on the inode, which results in
the following warning and trace:
WARNING: CPU: 3 PID: 2548 at fs/btrfs/transaction.c:537 start_transaction+0x489/0x4f0
Modules linked in: nft_objref nf_conntrack_netbios_ns (...)
CPU: 3 PID: 2548 Comm: mkdir Not tainted 5.9.0-rc2smack+ #81
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:start_transaction+0x489/0x4f0
Code: e9 be fc ff ff (...)
RSP: 0018:ffffc90001887d10 EFLAGS: 00010202
RAX: ffff88816f1e0000 RBX: 0000000000000201 RCX: 0000000000000003
RDX: 0000000000000201 RSI: 0000000000000002 RDI: ffff888177849000
RBP: ffff888177849000 R08: 0000000000000001 R09: 0000000000000004
R10: ffffffff825e8f7a R11: 0000000000000003 R12: ffffffffffffffe2
R13: 0000000000000000 R14: ffff88803d884270 R15: ffff8881680d8000
FS: 00007f67317b8440(0000) GS:ffff88817bcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f67247a22a8 CR3: 000000004bfbc002 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? slab_free_freelist_hook+0xea/0x1b0
? trace_hardirqs_on+0x1c/0xe0
btrfs_setxattr_trans+0x3c/0xf0
__vfs_setxattr+0x63/0x80
smack_d_instantiate+0x2d3/0x360
security_d_instantiate+0x29/0x40
d_instantiate_new+0x38/0x90
btrfs_mkdir+0x1cf/0x1e0
vfs_mkdir+0x14f/0x200
do_mkdirat+0x6d/0x110
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f673196ae6b
Code: 8b 05 11 (...)
RSP: 002b:00007ffc3c679b18 EFLAGS: 00000246 ORIG_RAX: 0000000000000053
RAX: ffffffffffffffda RBX: 00000000000001ff RCX: 00007f673196ae6b
RDX: 0000000000000000 RSI: 00000000000001ff RDI: 00007ffc3c67a30d
RBP: 00007ffc3c67a30d R08: 00000000000001ff R09: 0000000000000000
R10: 000055d3e39fe930 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc3c679cd8 R14: 00007ffc3c67a30d R15: 00007ffc3c679ce0
irq event stamp: 11029
hardirqs last enabled at (11037): [<ffffffff81153fe6>] console_unlock+0x486/0x670
hardirqs last disabled at (11044): [<ffffffff81153c01>] console_unlock+0xa1/0x670
softirqs last enabled at (8864): [<ffffffff81e0102f>] asm_call_on_stack+0xf/0x20
softirqs last disabled at (8851): [<ffffffff81e0102f>] asm_call_on_stack+0xf/0x20
This happens because at btrfs_mkdir() we call d_instantiate_new() while
holding a transaction handle, which results in the following call chain:
btrfs_mkdir()
trans = btrfs_start_transaction(root, 5);
d_instantiate_new()
smack_d_instantiate()
__vfs_setxattr()
btrfs_setxattr_trans()
btrfs_start_transaction()
start_transaction()
WARN_ON()
--> a tansaction start has TRANS_EXTWRITERS
set in its type
h->orig_rsv = h->block_rsv
h->block_rsv = NULL
btrfs_end_transaction(trans)
Besides the warning triggered at start_transaction, we set the handle's
block_rsv to NULL which may cause some surprises later on.
So fix this by making btrfs_setxattr_trans() not start a transaction when
we already have a handle on one, stored in current->journal_info, and use
that handle. We are good to use the handle because at btrfs_mkdir() we did
reserve space for the xattr and the inode item.
Reported-by: Casey Schaufler <casey@schaufler-ca.com>
CC: stable@vger.kernel.org # 5.4+
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://lore.kernel.org/linux-btrfs/434d856f-bd7b-4889-a6ec-e81aaebfa735@schaufler-ca.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Calling btrfs_qgroup_reserve_meta_prealloc from
btrfs_delayed_inode_reserve_metadata can result in flushing delalloc
while holding a transaction and delayed node locks. This is deadlock
prone. In the past multiple commits:
* ae5e070eac ("btrfs: qgroup: don't try to wait flushing if we're
already holding a transaction")
* 6f23277a49 ("btrfs: qgroup: don't commit transaction when we already
hold the handle")
Tried to solve various aspects of this but this was always a
whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock
scenario involving btrfs_delayed_node::mutex. Namely, one thread
can call btrfs_dirty_inode as a result of reading a file and modifying
its atime:
PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test"
#0 __schedule at ffffffffa529e07d
#1 schedule at ffffffffa529e4ff
#2 schedule_timeout at ffffffffa52a1bdd
#3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held
#4 start_delalloc_inodes at ffffffffc0380db5
#5 btrfs_start_delalloc_snapshot at ffffffffc0393836
#6 try_flush_qgroup at ffffffffc03f04b2
#7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes.
#8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex
#9 btrfs_update_inode at ffffffffc0385ba8
#10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED
#11 touch_atime at ffffffffa4cf0000
#12 generic_file_read_iter at ffffffffa4c1f123
#13 new_sync_read at ffffffffa4ccdc8a
#14 vfs_read at ffffffffa4cd0849
#15 ksys_read at ffffffffa4cd0bd1
#16 do_syscall_64 at ffffffffa4a052eb
#17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c
This will cause an asynchronous work to flush the delalloc inodes to
happen which can try to acquire the same delayed_node mutex:
PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30"
#0 __schedule at ffffffffa529e07d
#1 schedule at ffffffffa529e4ff
#2 schedule_preempt_disabled at ffffffffa529e80a
#3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up.
#4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex
#5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding
#6 cow_file_range_inline.constprop.78 at ffffffffc0386be7
#7 cow_file_range at ffffffffc03879c1
#8 btrfs_run_delalloc_range at ffffffffc038894c
#9 writepage_delalloc at ffffffffc03a3c8f
#10 __extent_writepage at ffffffffc03a4c01
#11 extent_write_cache_pages at ffffffffc03a500b
#12 extent_writepages at ffffffffc03a6de2
#13 do_writepages at ffffffffa4c277eb
#14 __filemap_fdatawrite_range at ffffffffa4c1e5bb
#15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes
#16 normal_work_helper at ffffffffc03b706c
#17 process_one_work at ffffffffa4aba4e4
#18 worker_thread at ffffffffa4aba6fd
#19 kthread at ffffffffa4ac0a3d
#20 ret_from_fork at ffffffffa54001ff
To fully address those cases the complete fix is to never issue any
flushing while holding the transaction or the delayed node lock. This
patch achieves it by calling qgroup_reserve_meta directly which will
either succeed without flushing or will fail and return -EDQUOT. In the
latter case that return value is going to be propagated to
btrfs_dirty_inode which will fallback to start a new transaction. That's
fine as the majority of time we expect the inode will have
BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly
copying the in-memory state.
Fixes: c53e965360 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Following commit f218ea6c47 ("btrfs: delayed-inode: Remove wrong
qgroup meta reservation calls") this function now reserves num_bytes,
rather than the fixed amount of nodesize. As such this requires the
same amount to be freed in case of failure. Fix this by adjusting
the amount we are freeing.
Fixes: f218ea6c47 ("btrfs: delayed-inode: Remove wrong qgroup meta reservation calls")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The intended logic of the check is to catch cases where the desired
free_space_tree setting doesn't match the mounted setting, and the
remount is anything but ro->rw. However, it makes the mistake of
checking equality on a masked integer (btrfs_test_opt) against a boolean
(btrfs_fs_compat_ro).
If you run the reproducer:
$ mount -o space_cache=v2 dev mnt
$ mount -o remount,ro mnt
you would expect no warning, because the remount is not attempting to
change the free space tree setting, but we do see the warning.
To fix this, add explicit bool type casts to the condition.
I tested a variety of transitions:
sudo mount -o space_cache=v2 /dev/vg0/lv0 mnt/lol
(fst enabled)
mount -o remount,ro mnt/lol
(no warning, no fst change)
sudo mount -o remount,rw,space_cache=v1,clear_cache
(no warning, ro->rw)
sudo mount -o remount,rw,space_cache=v2 mnt
(warning, rw->rw with change)
sudo mount -o remount,ro mnt
(no warning, no fst change)
sudo mount -o remount,rw,space_cache=v2 mnt
(no warning, no fst change)
Reported-by: Chris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 5.11
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The problem is we're copying "inherit" from user space but we don't
necessarily know that we're copying enough data for a 64 byte
struct. Then the next problem is that 'inherit' has a variable size
array at the end, and we have to verify that array is the size we
expected.
Fixes: 6f72c7e20d ("Btrfs: add qgroup inheritance")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If btrfs_qgroup_reserve_data returns an error (i.e quota limit reached)
the handling logic directly goes to the 'out' label without first
unlocking the extent range between lockstart, lockend. This results in
deadlocks as other processes try to lock the same extent.
Fixes: a7f8b1c2ac ("btrfs: file: reserve qgroup space after the hole punch range is locked")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix build warnings of function signature when CONFIG_STACKTRACE is not
enabled by reordering the 'inline' and 'void' keywords.
../fs/btrfs/ref-verify.c:221:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
static void inline __save_stack_trace(struct ref_action *ra)
../fs/btrfs/ref-verify.c:225:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
static void inline __print_stack_trace(struct btrfs_fs_info *fs_info,
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull kmap conversion updates from David Sterba:
"This contains changes regarding kmap API use and eg conversion from
kmap_atomic to kmap_local_page.
The API belongs to memory management but to save cross-tree
dependency headaches we've agreed to take it through the btrfs tree
because there are some trivial conversions possible, while the rest
will need some time and getting the easy cases out of the way would be
convenient.
The changes can be grouped:
- function exports, new helpers
- new VM_BUG_ON for additional verification; it's been discussed if
it should be VM_BUG_ON or BUG_ON, the former was chosen due to
performance reasons
- code replaced by relevant helpers"
[ This is an updated version of a request that originally came in during
the merge window, but I asked for some updates:
https://lore.kernel.org/lkml/cover.1614090658.git.dsterba@suse.com/
which is why this got merge after the merge window closed. - Linus ]
* 'kmap-conversion-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: use copy_highpage() instead of 2 kmaps()
btrfs: use memcpy_[to|from]_page() and kmap_local_page()
mm/highmem: Add VM_BUG_ON() to mem*_page() calls
mm/highmem: Introduce memcpy_page(), memmove_page(), and memset_page()
mm/highmem: Convert memcpy_[to|from]_page() to kmap_local_page()
mm/highmem: Lift memcpy_[to|from]_page to core
-----BEGIN PGP SIGNATURE-----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=QJEy
-----END PGP SIGNATURE-----
Merge tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"This is the first batch of fixes that usually arrive during the merge
window code freeze. Regressions and stable material.
Regressions:
- fix deadlock in log sync in zoned mode
- fix bugs in subpage mode still wrongly assuming sectorsize == page
size
Fixes:
- fix missing kunmap of the Q stripe in RAID6
- block group fixes:
- fix race between extent freeing/allocation when using bitmaps
- avoid double put of block group when emptying cluster
- swapfile fixes:
- fix swapfile writes vs running scrub
- fix swapfile activation vs snapshot creation
- fix stale data exposure after cloning a hole with NO_HOLES enabled
- remove tree-checker check that does not work in case information
from other leaves is necessary"
* tag 'for-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix deadlock on log sync
btrfs: avoid double put of block group when emptying cluster
btrfs: fix stale data exposure after cloning a hole with NO_HOLES enabled
btrfs: tree-checker: do not error out if extent ref hash doesn't match
btrfs: fix race between swap file activation and snapshot creation
btrfs: fix race between writes to swap files and scrub
btrfs: avoid checking for RO block group twice during nocow writeback
btrfs: fix race between extent freeing/allocation when using bitmaps
btrfs: make check_compressed_csum() to be subpage compatible
btrfs: make btrfs_submit_compressed_read() subpage compatible
btrfs: fix raid6 qstripe kmap
We need to have our worker count updated before continuing, to avoid
cases where we repeatedly think we need a new worker, but a fork is
already in progress.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Restore a disused sysctl control knob that was inadvertently dropped
during the merge window to avoid fstests regressions.
- Don't speculatively release freed blocks from the busy list until
we're actually allocating them, which fixes a rare log recovery
regression.
- Don't nest transactions when scanning for free space.
- Add an idiot^Wmaintainer light to detect nested transactions. ;)
-----BEGIN PGP SIGNATURE-----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=g9K3
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.12-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull more xfs updates from Darrick Wong:
"The most notable fix here prevents premature reuse of freed metadata
blocks, and adding the ability to detect accidental nested
transactions, which are not allowed here.
- Restore a disused sysctl control knob that was inadvertently
dropped during the merge window to avoid fstests regressions.
- Don't speculatively release freed blocks from the busy list until
we're actually allocating them, which fixes a rare log recovery
regression.
- Don't nest transactions when scanning for free space.
- Add an idiot^Wmaintainer light to detect nested transactions. ;)"
* tag 'xfs-5.12-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: use current->journal_info for detecting transaction recursion
xfs: don't nest transactions when scanning for eofblocks
xfs: don't reuse busy extents on extent trim
xfs: restore speculative_cow_prealloc_lifetime sysctl
-----BEGIN PGP SIGNATURE-----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=ccMs
-----END PGP SIGNATURE-----
Merge tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A few stragglers (and one due to me missing it originally), and fixes
for changes in this merge window mostly. In particular:
- blktrace cleanups (Chaitanya, Greg)
- Kill dead blk_pm_* functions (Bart)
- Fixes for the bio alloc changes (Christoph)
- Fix for the partition changes (Christoph, Ming)
- Fix for turning off iopoll with polled IO inflight (Jeffle)
- nbd disconnect fix (Josef)
- loop fsync error fix (Mauricio)
- kyber update depth fix (Yang)
- max_sectors alignment fix (Mikulas)
- Add bio_max_segs helper (Matthew)"
* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
block: Add bio_max_segs
blktrace: fix documentation for blk_fill_rw()
block: memory allocations in bounce_clone_bio must not fail
block: remove the gfp_mask argument to bounce_clone_bio
block: fix bounce_clone_bio for passthrough bios
block-crypto-fallback: use a bio_set for splitting bios
block: fix logging on capacity change
blk-settings: align max_sectors on "logical_block_size" boundary
block: reopen the device in blkdev_reread_part
block: don't skip empty device in in disk_uevent
blktrace: remove debugfs file dentries from struct blk_trace
nbd: handle device refs for DESTROY_ON_DISCONNECT properly
kyber: introduce kyber_depth_updated()
loop: fix I/O error on fsync() in detached loop devices
block: fix potential IO hang when turning off io_poll
block: get rid of the trace rq insert wrapper
blktrace: fix blk_rq_merge documentation
blktrace: fix blk_rq_issue documentation
blktrace: add blk_fill_rwbs documentation comment
block: remove superfluous param in blk_fill_rwbs()
...
-----BEGIN PGP SIGNATURE-----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=oc8u
-----END PGP SIGNATURE-----
Merge tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block
Pull io_uring thread rewrite from Jens Axboe:
"This converts the io-wq workers to be forked off the tasks in question
instead of being kernel threads that assume various bits of the
original task identity.
This kills > 400 lines of code from io_uring/io-wq, and it's the worst
part of the code. We've had several bugs in this area, and the worry
is always that we could be missing some pieces for file types doing
unusual things (recent /dev/tty example comes to mind, userfaultfd
reads installing file descriptors is another fun one... - both of
which need special handling, and I bet it's not the last weird oddity
we'll find).
With these identical workers, we can have full confidence that we're
never missing anything. That, in itself, is a huge win. Outside of
that, it's also more efficient since we're not wasting space and code
on tracking state, or switching between different states.
I'm sure we're going to find little things to patch up after this
series, but testing has been pretty thorough, from the usual
regression suite to production. Any issue that may crop up should be
manageable.
There's also a nice series of further reductions we can do on top of
this, but I wanted to get the meat of it out sooner rather than later.
The general worry here isn't that it's fundamentally broken. Most of
the little issues we've found over the last week have been related to
just changes in how thread startup/exit is done, since that's the main
difference between using kthreads and these kinds of threads. In fact,
if all goes according to plan, I want to get this into the 5.10 and
5.11 stable branches as well.
That said, the changes outside of io_uring/io-wq are:
- arch setup, simple one-liner to each arch copy_thread()
implementation.
- Removal of net and proc restrictions for io_uring, they are no
longer needed or useful"
* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
io-wq: remove now unused IO_WQ_BIT_ERROR
io_uring: fix SQPOLL thread handling over exec
io-wq: improve manager/worker handling over exec
io_uring: ensure SQPOLL startup is triggered before error shutdown
io-wq: make buffered file write hashed work map per-ctx
io-wq: fix race around io_worker grabbing
io-wq: fix races around manager/worker creation and task exit
io_uring: ensure io-wq context is always destroyed for tasks
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
io_uring: cleanup ->user usage
io-wq: remove nr_process accounting
io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
net: remove cmsg restriction from io_uring based send/recvmsg calls
Revert "proc: don't allow async path resolution of /proc/self components"
Revert "proc: don't allow async path resolution of /proc/thread-self components"
io_uring: move SQPOLL thread io-wq forked worker
io-wq: make io_wq_fork_thread() available to other users
io-wq: only remove worker from free_list, if it was there
io_uring: remove io_identity
io_uring: remove any grabbing of context
...
Pull misc vfs updates from Al Viro:
"Assorted stuff pile - no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
whack-a-mole: don't open-code iminor/imajor
9p: fix misuse of sscanf() in v9fs_stat2inode()
audit_alloc_mark(): don't open-code ERR_CAST()
fs/inode.c: make inode_init_always() initialize i_ino to 0
vfs: don't unnecessarily clone write access for writable fds
It's often inconvenient to use BIO_MAX_PAGES due to min() requiring the
sign to be the same. Introduce bio_max_segs() and change BIO_MAX_PAGES to
be unsigned to make it easier for the users.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=RQo/
-----END PGP SIGNATURE-----
Merge tag '5.12-smb3-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- improvements to mode bit conversion, chmod and chown when using
cifsacl mount option
- two new mount options for controlling attribute caching
- improvements to crediting and reconnect, improved debugging
- reconnect fix
- add SMB3.1.1 dialect to default dialects for vers=3
* tag '5.12-smb3-part1' of git://git.samba.org/sfrench/cifs-2.6: (27 commits)
cifs: update internal version number
cifs: use discard iterator to discard unneeded network data more efficiently
cifs: introduce helper for finding referral server to improve DFS target resolution
cifs: check all path components in resolved dfs target
cifs: fix DFS failover
cifs: fix nodfs mount option
cifs: fix handling of escaped ',' in the password mount argument
cifs: Add new parameter "acregmax" for distinct file and directory metadata timeout
cifs: convert revalidate of directories to using directory metadata cache timeout
cifs: Add new mount parameter "acdirmax" to allow caching directory metadata
cifs: If a corrupted DACL is returned by the server, bail out.
cifs: minor simplification to smb2_is_network_name_deleted
TCON Reconnect during STATUS_NETWORK_NAME_DELETED
cifs: cleanup a few le16 vs. le32 uses in cifsacl.c
cifs: Change SIDs in ACEs while transferring file ownership.
cifs: Retain old ACEs when converting between mode bits and ACL.
cifs: Fix cifsacl ACE mask for group and others.
cifs: clarify hostname vs ip address in /proc/fs/cifs/DebugData
cifs: change confusing field serverName (to ip_addr)
cifs: Fix inconsistent IS_ERR and PTR_ERR
...
-----BEGIN PGP SIGNATURE-----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=Vgca
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/io_uring-2021-02-25' of git://git.kernel.dk/linux-block
Pull more io_uring updates from Jens Axboe:
"A collection of later fixes that we should get into this release:
- Series of submission cleanups (Pavel)
- A few fixes for issues from earlier this merge window (Pavel, me)
- IOPOLL resubmission fix
- task_work locking fix (Hao)"
* tag 'for-5.12/io_uring-2021-02-25' of git://git.kernel.dk/linux-block: (25 commits)
Revert "io_uring: wait potential ->release() on resurrect"
io_uring: fix locked_free_list caches_free()
io_uring: don't attempt IO reissue from the ring exit path
io_uring: clear request count when freeing caches
io_uring: run task_work on io_uring_register()
io_uring: fix leaving invalid req->flags
io_uring: wait potential ->release() on resurrect
io_uring: keep generic rsrc infra generic
io_uring: zero ref_node after killing it
io_uring: make the !CONFIG_NET helpers a bit more robust
io_uring: don't hold uring_lock when calling io_run_task_work*
io_uring: fail io-wq submission from a task_work
io_uring: don't take uring_lock during iowq cancel
io_uring: fail links more in io_submit_sqe()
io_uring: don't do async setup for links' heads
io_uring: do io_*_prep() early in io_submit_sqe()
io_uring: split sqe-prep and async setup
io_uring: don't submit link on error
io_uring: move req link into submit_state
io_uring: move io_init_req() into io_submit_sqe()
...
Merge more updates from Andrew Morton:
"118 patches:
- The rest of MM.
Includes kfence - another runtime memory validator. Not as thorough
as KASAN, but it has unmeasurable overhead and is intended to be
usable in production builds.
- Everything else
Subsystems affected by this patch series: alpha, procfs, sysctl,
misc, core-kernel, MAINTAINERS, lib, bitops, checkpatch, init,
coredump, seq_file, gdb, ubsan, initramfs, and mm (thp, cma,
vmstat, memory-hotplug, mlock, rmap, zswap, zsmalloc, cleanups,
kfence, kasan2, and pagemap2)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
MIPS: make userspace mapping young by default
initramfs: panic with memory information
ubsan: remove overflow checks
kgdb: fix to kill breakpoints on initmem after boot
scripts/gdb: fix list_for_each
x86: fix seq_file iteration for pat/memtype.c
seq_file: document how per-entry resources are managed.
fs/coredump: use kmap_local_page()
init/Kconfig: fix a typo in CC_VERSION_TEXT help text
init: clean up early_param_on_off() macro
init/version.c: remove Version_<LINUX_VERSION_CODE> symbol
checkpatch: do not apply "initialise globals to 0" check to BPF progs
checkpatch: don't warn about colon termination in linker scripts
checkpatch: add kmalloc_array_node to unnecessary OOM message check
checkpatch: add warning for avoiding .L prefix symbols in assembly files
checkpatch: improve TYPECAST_INT_CONSTANT test message
checkpatch: prefer ftrace over function entry/exit printks
checkpatch: trivial style fixes
checkpatch: ignore warning designated initializers using NR_CPUS
checkpatch: improve blank line after declaration test
...
In dump_user_range() there is no reason for the mapping to be global. Use
kmap_local_page() rather than kmap.
Link: https://lkml.kernel.org/r/20210203223328.558945-1-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since
sysctl: pass kernel pointers to ->proc_handler
we have been pre-allocating a buffer to copy the data from the proc
handlers into, and then copying that to userspace. The problem is this
just blindly kzalloc()'s the buffer size passed in from the read, which in
the case of our 'cat' binary was 64kib. Order-4 allocations are not
awesome, and since we can potentially allocate up to our maximum order, so
use kvzalloc for these buffers.
[willy@infradead.org: changelog tweaks]
Link: https://lkml.kernel.org/r/6345270a2c1160b89dd5e6715461f388176899d1.1612972413.git.josef@toxicpanda.com
Fixes: 32927393dc ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
CC: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To resolve the symbol fuction name for wchan, use the printk format
specifier %ps instead of manually looking up the symbol function name
via lookup_symbol_name().
Link: https://lkml.kernel.org/r/20201217165413.GA1959@ls3530.fritz.box
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enhance mapping_seek_hole_data() to handle partially uptodate pages and
convert the iomap seek code to call it.
Link: https://lkml.kernel.org/r/20201112212641.27837-9-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- New Features:
- Support for eager writes, and the write=eager and write=wait mount options
- Other Bugfixes and Cleanups:
- Fix typos in some comments
- Fix up fall-through warnings for Clang
- Cleanups to the NFS readpage codepath
- Remove FMR support in rpcrdma_convert_iovs()
- Various other cleanups to xprtrdma
- Fix xprtrdma pad optimization for servers that don't support RFC 8797
- Improvements to rpcrdma tracepoints
- Fix up nfs4_bitmask_adjust()
- Optimize sparse writes past the end of files
-----BEGIN PGP SIGNATURE-----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=Dssn
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.12-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS Client Updates from Anna Schumaker:
"New Features:
- Support for eager writes, and the write=eager and write=wait mount
options
- Other Bugfixes and Cleanups:
- Fix typos in some comments
- Fix up fall-through warnings for Clang
- Cleanups to the NFS readpage codepath
- Remove FMR support in rpcrdma_convert_iovs()
- Various other cleanups to xprtrdma
- Fix xprtrdma pad optimization for servers that don't support
RFC 8797
- Improvements to rpcrdma tracepoints
- Fix up nfs4_bitmask_adjust()
- Optimize sparse writes past the end of files"
* tag 'nfs-for-5.12-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (27 commits)
NFS: Support the '-owrite=' option in /proc/self/mounts and mountinfo
NFS: Set the stable writes flag when initialising the super block
NFS: Add mount options supporting eager writes
NFS: Add support for eager writes
NFS: 'flags' field should be unsigned in struct nfs_server
NFS: Don't set NFS_INO_INVALID_XATTR if there is no xattr cache
NFS: Always clear an invalid mapping when attempting a buffered write
NFS: Optimise sparse writes past the end of file
NFS: Fix documenting comment for nfs_revalidate_file_size()
NFSv4: Fixes for nfs4_bitmask_adjust()
xprtrdma: Clean up rpcrdma_prepare_readch()
rpcrdma: Capture bytes received in Receive completion tracepoints
xprtrdma: Pad optimization, revisited
rpcrdma: Fix comments about reverse-direction operation
xprtrdma: Refactor invocations of offset_in_page()
xprtrdma: Simplify rpcrdma_convert_kvec() and frwr_map()
xprtrdma: Remove FMR support in rpcrdma_convert_iovs()
NFS: Add nfs_pageio_complete_read() and remove nfs_readpage_async()
NFS: Call readpage_async_filler() from nfs_readpage_async()
NFS: Refactor nfs_readpage() and nfs_readpage_async() to use nfs_readdesc
...
There are many places where kmap/memove/kunmap patterns occur.
This pattern exists in the core common function copy_highpage().
Use copy_highpage to avoid open coding the use of kmap and leverages the
core functions use of kmap_local_page().
Development of this patch was aided by the following coccinelle script:
// <smpl>
// SPDX-License-Identifier: GPL-2.0-only
// Find kmap/copypage/kunmap pattern and replace with copy_highpage calls
//
// NOTE: The expressions in the copy page version of this kmap pattern are
// overly complex and so these all need individual attention.
//
// Confidence: Low
// Copyright: (C) 2021 Intel Corporation
// URL: http://coccinelle.lip6.fr/
// Comments:
// Options:
//
// Then a copy_page where we have 2 pages involved.
//
@ copy_page_rule @
expression page, page2, To, From, Size;
identifier ptr, ptr2;
type VP, VP2;
@@
/* kmap */
(
-VP ptr = kmap(page);
...
-VP2 ptr2 = kmap(page2);
|
-VP ptr = kmap_atomic(page);
...
-VP2 ptr2 = kmap_atomic(page2);
|
-ptr = kmap(page);
...
-ptr2 = kmap(page2);
|
-ptr = kmap_atomic(page);
...
-ptr2 = kmap_atomic(page2);
)
// 1 or more copy versions of the entire page
<+...
(
-copy_page(To, From);
+copy_highpage(To, From);
|
-memmove(To, From, Size);
+memmoveExtra(To, From, Size);
)
...+>
/* kunmap */
(
-kunmap(page2);
...
-kunmap(page);
|
-kunmap(page);
...
-kunmap(page2);
|
-kmap_atomic(ptr2);
...
-kmap_atomic(ptr);
)
// Remove any pointers left unused
@
depends on copy_page_rule
@
identifier copy_page_rule.ptr;
identifier copy_page_rule.ptr2;
type VP, VP1;
type VP2, VP21;
@@
-VP ptr;
... when != ptr;
? VP1 ptr;
-VP2 ptr2;
... when != ptr2;
? VP21 ptr2;
// </smpl>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are many places where the pattern kmap/memcpy/kunmap occurs.
This pattern was lifted to the core common functions
memcpy_[to|from]_page().
Use these new functions to reduce the code, eliminate direct uses of
kmap, and leverage the new core functions use of kmap_local_page().
Also, there is 1 place where a kmap/memcpy is followed by an
optional memset. Here we leave the kmap open coded to avoid remapping
the page but use kmap_local_page() directly.
Development of this patch was aided by the coccinelle script:
// <smpl>
// SPDX-License-Identifier: GPL-2.0-only
// Find kmap/memcpy/kunmap pattern and replace with memcpy*page calls
//
// NOTE: Offsets and other expressions may be more complex than what the script
// will automatically generate. Therefore a catchall rule is provided to find
// the pattern which then must be evaluated by hand.
//
// Confidence: Low
// Copyright: (C) 2021 Intel Corporation
// URL: http://coccinelle.lip6.fr/
// Comments:
// Options:
//
// simple memcpy version
//
@ memcpy_rule1 @
expression page, T, F, B, Off;
identifier ptr;
type VP;
@@
(
-VP ptr = kmap(page);
|
-ptr = kmap(page);
|
-VP ptr = kmap_atomic(page);
|
-ptr = kmap_atomic(page);
)
<+...
(
-memcpy(ptr + Off, F, B);
+memcpy_to_page(page, Off, F, B);
|
-memcpy(ptr, F, B);
+memcpy_to_page(page, 0, F, B);
|
-memcpy(T, ptr + Off, B);
+memcpy_from_page(T, page, Off, B);
|
-memcpy(T, ptr, B);
+memcpy_from_page(T, page, 0, B);
)
...+>
(
-kunmap(page);
|
-kunmap_atomic(ptr);
)
// Remove any pointers left unused
@
depends on memcpy_rule1
@
identifier memcpy_rule1.ptr;
type VP, VP1;
@@
-VP ptr;
... when != ptr;
? VP1 ptr;
//
// Some callers kmap without a temp pointer
//
@ memcpy_rule2 @
expression page, T, Off, F, B;
@@
<+...
(
-memcpy(kmap(page) + Off, F, B);
+memcpy_to_page(page, Off, F, B);
|
-memcpy(kmap(page), F, B);
+memcpy_to_page(page, 0, F, B);
|
-memcpy(T, kmap(page) + Off, B);
+memcpy_from_page(T, page, Off, B);
|
-memcpy(T, kmap(page), B);
+memcpy_from_page(T, page, 0, B);
)
...+>
-kunmap(page);
// No need for the ptr variable removal
//
// Catch all
//
@ memcpy_rule3 @
expression page;
expression GenTo, GenFrom, GenSize;
identifier ptr;
type VP;
@@
(
-VP ptr = kmap(page);
|
-ptr = kmap(page);
|
-VP ptr = kmap_atomic(page);
|
-ptr = kmap_atomic(page);
)
<+...
(
//
// Some call sites have complex expressions within the memcpy
// match a catch all to be evaluated by hand.
//
-memcpy(GenTo, GenFrom, GenSize);
+memcpy_to_pageExtra(page, GenTo, GenFrom, GenSize);
+memcpy_from_pageExtra(GenTo, page, GenFrom, GenSize);
)
...+>
(
-kunmap(page);
|
-kunmap_atomic(ptr);
)
// Remove any pointers left unused
@
depends on memcpy_rule3
@
identifier memcpy_rule3.ptr;
type VP, VP1;
@@
-VP ptr;
... when != ptr;
? VP1 ptr;
// <smpl>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The iterator, ITER_DISCARD, that can only be used in READ mode and
just discards any data copied to it, was added to allow a network
filesystem to discard any unwanted data sent by a server.
Convert cifs_discard_from_socket() to use this.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers seem to mistakenly report different values for
capabilities and share flags, so we can't always rely on those values
to decide whether the resolved target can handle any new DFS
referrals.
Add a new helper is_referral_server() to check if all resolved targets
can handle new DFS referrals by directly looking at the
GET_DFS_REFERRAL.ReferralHeaderFlags value as specified in MS-DFSC
2.2.4 RESP_GET_DFS_REFERRAL in addition to is_tcon_dfs().
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Steve French <stfrench@microsoft.com>
Handle the case where a resolved target share is like
//server/users/dir, and the user "foo" has no read permission to
access the parent folder "users" but has access to the final path
component "dir".
is_path_remote() already implements that, so call it directly.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Steve French <stfrench@microsoft.com>
In do_dfs_failover(), the mount_get_conns() function requires the full
fs context in order to get new connection to server, so clone the
original context and change it accordingly when retrying the DFS
targets in the referral.
If failover was successful, then update original context with the new
UNC, prefix path and ip address.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.11
Signed-off-by: Steve French <stfrench@microsoft.com>
Skip DFS resolving when mounting with 'nodfs' even if
CONFIG_CIFS_DFS_UPCALL is enabled.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org # 5.11
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Passwords can contain ',' which are also used as the separator between
mount options. Mount.cifs will escape all ',' characters as the string ",,".
Update parsing of the mount options to detect ",," and treat it as a single
'c' character.
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Cc: stable@vger.kernel.org # 5.11
Reported-by: Simon Taylor <simon@simon-taylor.me.uk>
Tested-by: Simon Taylor <simon@simon-taylor.me.uk>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cycle...
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmA3qgEACgkQ8vlZVpUN
gaMHqwf+IGiMeyB3BnIbQZjcwgyxRYMMmod0tcGv4yK4bf85+rTZZMcPZm5Ioqwm
+XLnuRW+x3Do6lnzNZj9p+qnPNwX2YGupwGeAoT5puMDKl0J7HhvdqPcNi4WgucW
K+LCAxbPjVFUAkpD2gwgNgXej4Us1QP/93GGG8YhTd+jiYS7axrRbAlE+4SmCsye
83dEWpXSFDE0qXHoaPwLo26LMPySPjWM/UuiWD8ozQ+mcL0Doecw1tWJottSo+Ds
+cJtxiOPVPTFwZUJOt/qoxfPnALrqAeazS+3lGmqK5c3xbvsc9CiYqP15FUbQF08
eCDMo9bpqQdRs4WmaRSvBzV8v+/TXg==
=+amQ
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Miscellaneous ext4 cleanups and bug fixes. Pretty boring this cycle..."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: add .kunitconfig fragment to enable ext4-specific tests
ext: EXT4_KUNIT_TESTS should depend on EXT4_FS instead of selecting it
ext4: reset retry counter when ext4_alloc_file_blocks() makes progress
ext4: fix potential htree index checksum corruption
ext4: factor out htree rep invariant check
ext4: Change list_for_each* to list_for_each_entry*
ext4: don't try to processed freed blocks until mballoc is initialized
ext4: use DEFINE_MUTEX() for mutex lock
The new optional mount parameter "acregmax" allows a different
timeout for file metadata ("acdirmax" now allows controlling timeout
for directory metadata). Setting "actimeo" still works as before,
and changes timeout for both files and directories, but
specifying "acregmax" or "acdirmax" allows overriding the
default more granularly which can be a big performance benefit
on some workloads. "acregmax" is already used by NFS as a mount
parameter (albeit with a larger default and thus looser caching).
Suggested-by: Tom Talpey <tom@talpey.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The new optional mount parm, "acdirmax" allows caching the metadata
for a directory longer than file metadata, which can be very helpful
for performance. Convert cifs_inode_needs_reval to check acdirmax
for revalidating directory metadata.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
nfs and cifs on Linux currently have a mount parameter "actimeo" to control
metadata (attribute) caching but cifs does not have additional mount
parameters to allow distinguishing between caching directory metadata
(e.g. needed to revalidate paths) and that for files.
Add new mount parameter "acdirmax" to allow caching metadata for
directories more loosely than file data. NFS adjusts metadata
caching from acdirmin to acdirmax (and another two mount parms
for files) but to reduce complexity, it is safer to just introduce
the one mount parm to allow caching directories longer. The
defaults for acdirmax and actimeo (for cifs.ko) are conservative,
1 second (NFS defaults acdirmax to 60 seconds). For many workloads,
setting acdirmax to a higher value is safe and will improve
performance. This patch leaves unchanged the default values
for caching metadata for files and directories but gives the
user more flexibility in adjusting them safely for their workload
via the new mount parm.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Just like the changes for io-wq, ensure that we re-fork the SQPOLL
thread if the owner execs. Mark the ctx sq thread as sqo_exec if
it dies, and the ring as needing a wakeup which will force the task
to enter the kernel. When it does, setup the new thread and proceed
as usual.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
exec will cancel any threads, including the ones that io-wq is using. This
isn't a problem, in fact we'd prefer it to be that way since it means we
know that any async work cancels naturally without having to handle it
proactively.
But it does mean that we need to setup a new manager, as the manager and
workers are gone. Handle this at queue time, and cancel work if we fail.
Since the manager can go away without us noticing, ensure that the manager
itself holds a reference to the 'wq' as well. Rename io_wq_destroy() to
io_wq_put() to reflect that.
In the future we can now simplify exec cancelation handling, for now just
leave it the same.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot reports the following hang:
INFO: task syz-executor.0:12538 can't die for more than 143 seconds.
task:syz-executor.0 state:D stack:28352 pid:12538 ppid: 8423 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4324 [inline]
__schedule+0x90c/0x21a0 kernel/sched/core.c:5075
schedule+0xcf/0x270 kernel/sched/core.c:5154
schedule_timeout+0x1db/0x250 kernel/time/timer.c:1868
do_wait_for_common kernel/sched/completion.c:85 [inline]
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion+0x168/0x270 kernel/sched/completion.c:138
io_sq_thread_finish+0x96/0x580 fs/io_uring.c:7152
io_sq_offload_create fs/io_uring.c:7929 [inline]
io_uring_create fs/io_uring.c:9465 [inline]
io_uring_setup+0x1fb2/0x2c20 fs/io_uring.c:9550
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
which is due to exiting after the SQPOLL thread has been created, but
hasn't been started yet. Ensure that we always complete the startup
side when waiting for it to exit.
Reported-by: syzbot+c927c937cba8ef66dd4a@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before the io-wq thread change, we maintained a hash work map and lock
per-node per-ring. That wasn't ideal, as we really wanted it to be per
ring. But now that we have per-task workers, the hash map ends up being
just per-task. That'll work just fine for the normal case of having
one task use a ring, but if you share the ring between tasks, then it's
considerably worse than it was before.
Make the hash map per ctx instead, which provides full per-ctx buffered
write serialization on hashed writes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Because the iomap code using PF_MEMALLOC_NOFS to detect transaction
recursion in XFS is just wrong. Remove it from the iomap code and
replace it with XFS specific internal checks using
current->journal_info instead.
[djwong: This change also realigns the lifetime of NOFS flag changes to
match the incore transaction, instead of the inconsistent scheme we have
now.]
Fixes: 9070733b4e ("xfs: abstract PF_FSTRANS to PF_MEMALLOC_NOFS")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Brian Foster reported a lockdep warning on xfs/167:
============================================
WARNING: possible recursive locking detected
5.11.0-rc4 #35 Tainted: G W I
--------------------------------------------
fsstress/17733 is trying to acquire lock:
ffff8e0fd1d90650 (sb_internal){++++}-{0:0}, at: xfs_free_eofblocks+0x104/0x1d0 [xfs]
but task is already holding lock:
ffff8e0fd1d90650 (sb_internal){++++}-{0:0}, at: xfs_trans_alloc_inode+0x5f/0x160 [xfs]
stack backtrace:
CPU: 38 PID: 17733 Comm: fsstress Tainted: G W I 5.11.0-rc4 #35
Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 1.6.11 11/20/2018
Call Trace:
dump_stack+0x8b/0xb0
__lock_acquire.cold+0x159/0x2ab
lock_acquire+0x116/0x370
xfs_trans_alloc+0x1ad/0x310 [xfs]
xfs_free_eofblocks+0x104/0x1d0 [xfs]
xfs_blockgc_scan_inode+0x24/0x60 [xfs]
xfs_inode_walk_ag+0x202/0x4b0 [xfs]
xfs_inode_walk+0x66/0xc0 [xfs]
xfs_trans_alloc+0x160/0x310 [xfs]
xfs_trans_alloc_inode+0x5f/0x160 [xfs]
xfs_alloc_file_space+0x105/0x300 [xfs]
xfs_file_fallocate+0x270/0x460 [xfs]
vfs_fallocate+0x14d/0x3d0
__x64_sys_fallocate+0x3e/0x70
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The cause of this is the new code that spurs a scan to garbage collect
speculative preallocations if we fail to reserve enough blocks while
allocating a transaction. While the warning itself is a fairly benign
lockdep complaint, it does expose a potential livelock if the rwsem
behavior ever changes with regards to nesting read locks when someone's
waiting for a write lock.
Fix this by freeing the transaction and jumping back to xfs_trans_alloc
like this patch in the V4 submission[1].
[1] https://lore.kernel.org/linux-xfs/161142798066.2171939.9311024588681972086.stgit@magnolia/
Fixes: a1a7d05a05 ("xfs: flush speculative space allocations when we run out of space")
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Freed extents are marked busy from the point the freeing transaction
commits until the associated CIL context is checkpointed to the log.
This prevents reuse and overwrite of recently freed blocks before
the changes are committed to disk, which can lead to corruption
after a crash. The exception to this rule is that metadata
allocation is allowed to reuse busy extents because metadata changes
are also logged.
As of commit 97d3ac75e5 ("xfs: exact busy extent tracking"), XFS
has allowed modification or complete invalidation of outstanding
busy extents for metadata allocations. This implementation assumes
that use of the associated extent is imminent, which is not always
the case. For example, the trimmed extent might not satisfy the
minimum length of the allocation request, or the allocation
algorithm might be involved in a search for the optimal result based
on locality.
generic/019 reproduces a corruption caused by this scenario. First,
a metadata block (usually a bmbt or symlink block) is freed from an
inode. A subsequent bmbt split on an unrelated inode attempts a near
mode allocation request that invalidates the busy block during the
search, but does not ultimately allocate it. Due to the busy state
invalidation, the block is no longer considered busy to subsequent
allocation. A direct I/O write request immediately allocates the
block and writes to it. Finally, the filesystem crashes while in a
state where the initial metadata block free had not committed to the
on-disk log. After recovery, the original metadata block is in its
original location as expected, but has been corrupted by the
aforementioned dio.
This demonstrates that it is fundamentally unsafe to modify busy
extent state for extents that are not guaranteed to be allocated.
This applies to pretty much all of the code paths that currently
trim busy extents for one reason or another. Therefore to address
this problem, drop the reuse mechanism from the busy extent trim
path. This code already knows how to return partial non-busy ranges
of the targeted free extent and higher level code tracks the busy
state of the allocation attempt. If a block allocation fails where
one or more candidate extents is busy, we force the log and retry
the allocation.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This reverts commit 88f171ab77.
I ran into a case where the ref resurrect now spins, so revert
this change for now until we can further investigate why it's
broken. The bug seems to indicate spinning on the lock itself,
likely there's some ABBA deadlock involved:
[<0>] __percpu_ref_switch_mode+0x45/0x180
[<0>] percpu_ref_resurrect+0x46/0x70
[<0>] io_refs_resurrect+0x25/0xa0
[<0>] __io_uring_register+0x135/0x10c0
[<0>] __x64_sys_io_uring_register+0xc2/0x1a0
[<0>] do_syscall_64+0x42/0x110
[<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge misc updates from Andrew Morton:
"A few small subsystems and some of MM.
172 patches.
Subsystems affected by this patch series: hexagon, scripts, ntfs,
ocfs2, vfs, and mm (slab-generic, slab, slub, debug, pagecache, swap,
memcg, pagemap, mprotect, mremap, page-reporting, vmalloc, kasan,
pagealloc, memory-failure, hugetlb, vmscan, z3fold, compaction,
mempolicy, oom-kill, hugetlbfs, and migration)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (172 commits)
mm/migrate: remove unneeded semicolons
hugetlbfs: remove unneeded return value of hugetlb_vmtruncate()
hugetlbfs: fix some comment typos
hugetlbfs: correct some obsolete comments about inode i_mutex
hugetlbfs: make hugepage size conversion more readable
hugetlbfs: remove meaningless variable avoid_reserve
hugetlbfs: correct obsolete function name in hugetlbfs_read_iter()
hugetlbfs: use helper macro default_hstate in init_hugetlbfs_fs
hugetlbfs: remove useless BUG_ON(!inode) in hugetlbfs_setattr()
hugetlbfs: remove special hugetlbfs_set_page_dirty()
mm/hugetlb: change hugetlb_reserve_pages() to type bool
mm, oom: fix a comment in dump_task()
mm/mempolicy: use helper range_in_vma() in queue_pages_test_walk()
numa balancing: migrate on fault among multiple bound nodes
mm, compaction: make fast_isolate_freepages() stay within zone
mm/compaction: fix misbehaviors of fast_find_migrateblock()
mm/compaction: correct deferral logic for proactive compaction
mm/compaction: remove duplicated VM_BUG_ON_PAGE !PageLocked
mm/compaction: remove rcu_read_lock during page compaction
z3fold: simplify the zhdr initialization code in init_z3fold_page()
...
The function hugetlb_vmtruncate() is guaranteed to always success since
commit 7aa91e1040 ("hugetlb: allow extending ftruncate on hugetlbfs").
So we should remove the unneeded return value which is always 0.
Link: https://lkml.kernel.org/r/20210208084637.47789-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix typos reserv to reserve, minimim to minimum. No functional change
intended.
Link: https://lkml.kernel.org/r/20210130092351.28072-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 9902af79c0 ("parallel lookups: actual switch to rwsem"),
i_mutex of inode is converted to i_rwsem. So replace i_mutex with i_rwsem
to make comments up to date.
Link: https://lkml.kernel.org/r/20210127093111.36672-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The calculation 1U << (h->order + PAGE_SHIFT - 10) is actually equal to
(PAGE_SHIFT << (h->order)) >> 10. So we can make it more readable by
replace it with huge_page_size(h) >> 10.
Link: https://lkml.kernel.org/r/20210122083141.24548-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The variable avoid_reserve is meaningless because we never changed its
value and just passed it to alloc_huge_page(). So remove it to make code
more clear that in hugetlbfs_fallocate, we never avoid reserve when alloc
hugepage yet. Also add a comment offered by Mike Kravetz to explain this.
Link: https://lkml.kernel.org/r/20210120071508.9078-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 36e7891442 ("kill do_generic_mapping_read"), the function
do_generic_mapping_read() is renamed to do_generic_file_read(). And then
commit 47c27bc469 ("fs: pass iocb to do_generic_file_read") renamed it
to generic_file_buffered_read(). So replace do_generic_mapping_read() with
generic_file_buffered_read() to keep comment uptodate.
Link: https://lkml.kernel.org/r/20210118063210.47118-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit e5ff215941 ("hugetlb: multiple hstates for multiple page
sizes"), we can use macro default_hstate to get the struct hstate which we
use by default. But init_hugetlbfs_fs() forgot to use it.
Link: https://lkml.kernel.org/r/20210116091827.20982-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we reach here with inode = NULL, we should have crashed as inode has
already been dereferenced via hstate_inode. So this BUG_ON(!inode) does
not take effect and should be removed.
Link: https://lkml.kernel.org/r/20210118110700.52506-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matthew Wilcox noticed that hugetlbfs_set_page_dirty always returns 0.
Instead, it should return 1 or 0 depending on the previous state of the
dirty bit. In addition, the call to compound_head is redundant as it is
also performed in calling routine set_page_dirty.
Replace the hugetlbfs specific routine hugetlbfs_set_page_dirty with
__set_page_dirty_no_writeback as it addresses both of these issues.
Link: https://lkml.kernel.org/r/20201221192542.15732-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While reviewing a bug in hugetlb_reserve_pages, it was noticed that all
callers ignore the return value. Any failure is considered an ENOMEM
error by the callers.
Change the function to be of type bool. The function will return true if
the reservation was successful, false otherwise. Callers currently assume
a zero return code indicates success. Change the callers to look for true
to indicate success. No functional change, only code cleanup.
Link: https://lkml.kernel.org/r/20201221192542.15732-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the new hugetlb page specific flag HPageMigratable to replace the
page_huge_active interfaces. By it's name, page_huge_active implied that
a huge page was on the active list. However, that is not really what code
checking the flag wanted to know. It really wanted to determine if the
huge page could be migrated. This happens when the page is actually added
to the page cache and/or task page table. This is the reasoning behind
the name change.
The VM_BUG_ON_PAGE() calls in the *_huge_active() interfaces are not
really necessary as we KNOW the page is a hugetlb page. Therefore, they
are removed.
The routine page_huge_active checked for PageHeadHuge before testing the
active bit. This is unnecessary in the case where we hold a reference or
lock and know it is a hugetlb head page. page_huge_active is also called
without holding a reference or lock (scan_movable_pages), and can race
with code freeing the page. The extra check in page_huge_active shortened
the race window, but did not prevent the race. Offline code calling
scan_movable_pages already deals with these races, so removing the check
is acceptable. Add comment to racy code.
[songmuchun@bytedance.com: remove set_page_huge_active() declaration from include/linux/hugetlb.h]
Link: https://lkml.kernel.org/r/CAMZfGtUda+KoAZscU0718TN61cSFwp4zy=y2oZ=+6Z2TAZZwng@mail.gmail.com
Link: https://lkml.kernel.org/r/20210122195231.324857-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "create hugetlb flags to consolidate state", v3.
While discussing a series of hugetlb fixes in [1], it became evident that
the hugetlb specific page state information is stored in a somewhat
haphazard manner. Code dealing with state information would be easier to
read, understand and maintain if this information was stored in a
consistent manner.
This series uses page.private of the hugetlb head page for storing a set
of hugetlb specific page flags. Routines are priovided for test, set and
clear of the flags.
[1] https://lore.kernel.org/r/20210106084739.63318-1-songmuchun@bytedance.com
This patch (of 4):
As hugetlbfs evolved, state information about hugetlb pages was added.
One 'convenient' way of doing this was to use available fields in tail
pages. Over time, it has become difficult to know the meaning or contents
of fields simply by looking at a small bit of code. Sometimes, the naming
is just confusing. For example: The PagePrivate flag indicates a huge
page reservation was consumed and needs to be restored if an error is
encountered and the page is freed before it is instantiated. The
page.private field contains the pointer to a subpool if the page is
associated with one.
In an effort to make the code more readable, use page.private to contain
hugetlb specific page flags. These flags will have test, set and clear
functions similar to those used for 'normal' page flags. More
importantly, an enum of flag values will be created with names that
actually reflect their purpose.
In this patch,
- Create infrastructure for hugetlb specific page flag functions
- Move subpool pointer to page[1].private to make way for flags
Create routines with meaningful names to modify subpool field
- Use new HPageRestoreReserve flag instead of PagePrivate
Conversion of other state information will happen in subsequent patches.
Link: https://lkml.kernel.org/r/20210122195231.324857-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20210122195231.324857-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
alloc_page_buffers() currently uses get_mem_cgroup_from_page() for
charging the buffers to the page owner, which does an rcu-protected
page->memcg lookup and acquires a reference. But buffer allocation has
the page lock held throughout, which pins the page to the memcg and
thereby the memcg - neither rcu nor holding an extra reference during the
allocation are necessary. Use a raw page_memcg() instead.
This was the last user of get_mem_cgroup_from_page(), delete it.
Link: https://lkml.kernel.org/r/20210209190126.97842-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_FILE_PMDMAPPED account to pages. This patch is
consistent with 8f182270df ("mm/swap.c: flush lru pvecs on compound page
arrival"). Doing this also can make the unit of vmstat counters more
unified. Finally, the unit of the vmstat counters are pages, kB and
bytes. The B/KB suffix can tell us that the unit is bytes or kB. The
rest which is without suffix are pages.
Link: https://lkml.kernel.org/r/20201228164110.2838-7-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Cc: Rafael. J. Wysocki <rafael@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_SHMEM_PMDMAPPED account to pages. This patch is
consistent with 8f182270df ("mm/swap.c: flush lru pvecs on compound page
arrival"). Doing this also can make the unit of vmstat counters more
unified. Finally, the unit of the vmstat counters are pages, kB and
bytes. The B/KB suffix can tell us that the unit is bytes or kB. The
rest which is without suffix are pages.
Link: https://lkml.kernel.org/r/20201228164110.2838-6-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Cc: Rafael. J. Wysocki <rafael@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_SHMEM_THPS account to pages. This patch is
consistent with 8f182270df ("mm/swap.c: flush lru pvecs on compound page
arrival"). Doing this also can make the unit of vmstat counters more
unified. Finally, the unit of the vmstat counters are pages, kB and
bytes. The B/KB suffix can tell us that the unit is bytes or kB. The
rest which is without suffix are pages.
Link: https://lkml.kernel.org/r/20201228164110.2838-5-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Cc: Rafael. J. Wysocki <rafael@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with if hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_FILE_THPS account to pages. This patch is consistent
with 8f182270df ("mm/swap.c: flush lru pvecs on compound page arrival").
Doing this also can make the unit of vmstat counters more unified.
Finally, the unit of the vmstat counters are pages, kB and bytes. The
B/KB suffix can tell us that the unit is bytes or kB. The rest which is
without suffix are pages.
Link: https://lkml.kernel.org/r/20201228164110.2838-4-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Cc: Rafael. J. Wysocki <rafael@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we use struct per_cpu_nodestat to cache the vmstat counters,
which leads to inaccurate statistics especially THP vmstat counters. In
the systems with hundreds of processors it can be GBs of memory. For
example, for a 96 CPUs system, the threshold is the maximum number of 125.
And the per cpu counters can cache 23.4375 GB in total.
The THP page is already a form of batched addition (it will add 512 worth
of memory in one go) so skipping the batching seems like sensible.
Although every THP stats update overflows the per-cpu counter, resorting
to atomic global updates. But it can make the statistics more accuracy
for the THP vmstat counters.
So we convert the NR_ANON_THPS account to pages. This patch is consistent
with 8f182270df ("mm/swap.c: flush lru pvecs on compound page arrival").
Doing this also can make the unit of vmstat counters more unified.
Finally, the unit of the vmstat counters are pages, kB and bytes. The
B/KB suffix can tell us that the unit is bytes or kB. The rest which is
without suffix are pages.
Link: https://lkml.kernel.org/r/20201228164110.2838-3-songmuchun@bytedance.com
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rafael. J. Wysocki <rafael@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: NeilBrown <neilb@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pankaj Gupta <pankaj.gupta@cloud.ionos.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
clear_buffer_new() is used to clear buffer new stat. When PAGE_SIZE is
64K, most buffer heads in the list are not needed to clear.
clear_buffer_new() has an enpensive atomic modification operation, Let's
add checking buffer head before clear it as __block_write_begin_int does
which is good for performance.
Link: https://lkml.kernel.org/r/1612332890-57918-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Yang Guo <guoyang2@huawei.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Rename generic_file_buffered_read to match the naming of filemap_fault,
also update the written parameter to a more descriptive name and improve
the kerneldoc comment.
Link: https://lkml.kernel.org/r/20210122160140.223228-18-willy@infradead.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 74d609585d ("page cache: Add and replace pages using the
XArray") was merged, the replace_page_cache_page() can not fail and always
return 0, we can remove the redundant return value and void it. Moreover
remove the unused gfp_mask.
Link: https://lkml.kernel.org/r/609c30e5274ba15d8b90c872fd0d8ac437a9b2bb.1610071401.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Delete duplicate words in fs/*.c.
The doubled words that are being dropped are:
that, be, the, in, and, for
Link: https://lkml.kernel.org/r/20201224052810.25315-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the following coccicheck warnings:
fs/ocfs2/refcounttree.c:981:16-18: WARNING !A || A && B is equivalent to !A || B.
Link: https://lkml.kernel.org/r/1612235424-80367-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The error handling in this function frees "reg" but it is still on the
"o2hb_all_regions" list so it will lead to a use after freew. Joseph Qi
points out that we need to clear the bit in the "o2hb_region_bitmap" as
well
Link: https://lkml.kernel.org/r/YBk4M6HUG8jB/jc7@mwanda
Fixes: 1cf257f511 ("ocfs2: fix memory leak")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are some definitions which is not used anymore in OCFS2 module, so
as to be removed.
Link: https://lkml.kernel.org/r/2021011916182284700534@chinatelecom.cn
Signed-off-by: Guozhonghua <guozh88@chinatelecom.cn>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
iput handles NULL pointers gracefully, so there's no need to check the
pointer before the call.
Link: https://lkml.kernel.org/r/20201231040535.4091761-1-yili@winhong.com
Signed-off-by: Yi Li <yili@winhong.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Drop the repeated words "the" and "in" in comments.
Link: https://lkml.kernel.org/r/20210125194937.24627-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 9669f51de5 I tried to get rid of the undocumented cow gc
lifetime knob. The knob's function was never documented and it now
doesn't really have a function since eof and cow gc have been
consolidated.
Regrettably, xfs/231 relies on it and regresses on for-next. I did not
succeed at getting far enough through fstests patch review for the fixup
to land in time.
Restore the sysctl knob, document what it did (does?), put it on the
deprecation schedule, and rip out a redundant function.
Fixes: 9669f51de5 ("xfs: consolidate the eofblocks and cowblocks workers")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Here is the "big" driver core and debugfs update for 5.12-rc1
This set of driver core patches caused a bunch of problems in linux-next
for the past few weeks, when Saravana tried to set fw_devlink=on as the
default functionality. This caused a number of systems to stop booting,
and lots of bugs were fixed in this area for almost all of the reported
systems, but this option is not ready to be turned on just yet for the
default operation based on this testing, so I've reverted that change at
the very end so we don't have to worry about regressions in 5.12. We
will try to turn this on for 5.13 if testing goes better over the next
few months.
Other than the fixes caused by the fw_devlink testing in here, there's
not much more:
- debugfs fixes for invalid input into debugfs_lookup()
- kerneldoc cleanups
- warn message if platform drivers return an error on their
remove callback (a futile effort, but good to catch).
All of these have been in linux-next for a while now, and the
regressions have gone away with the revert of the fw_devlink change.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYDZhzA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylS2wCfU28FxDWNwcWhPFVfRT8Mb3OxZ50An1sR4lNR
t5Ie4aztMUjVJhI9bq6g
=3NSB
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core / debugfs update from Greg KH:
"Here is the "big" driver core and debugfs update for 5.12-rc1
This set of driver core patches caused a bunch of problems in
linux-next for the past few weeks, when Saravana tried to set
fw_devlink=on as the default functionality. This caused a number of
systems to stop booting, and lots of bugs were fixed in this area for
almost all of the reported systems, but this option is not ready to be
turned on just yet for the default operation based on this testing, so
I've reverted that change at the very end so we don't have to worry
about regressions in 5.12
We will try to turn this on for 5.13 if testing goes better over the
next few months.
Other than the fixes caused by the fw_devlink testing in here, there's
not much more:
- debugfs fixes for invalid input into debugfs_lookup()
- kerneldoc cleanups
- warn message if platform drivers return an error on their remove
callback (a futile effort, but good to catch).
All of these have been in linux-next for a while now, and the
regressions have gone away with the revert of the fw_devlink change"
* tag 'driver-core-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (35 commits)
Revert "driver core: Set fw_devlink=on by default"
of: property: fw_devlink: Ignore interrupts property for some configs
debugfs: do not attempt to create a new file before the filesystem is initalized
debugfs: be more robust at handling improper input in debugfs_lookup()
driver core: auxiliary bus: Fix calling stage for auxiliary bus init
of: irq: Fix the return value for of_irq_parse_one() stub
of: irq: make a stub for of_irq_parse_one()
clk: Mark fwnodes when their clock provider is added/removed
PM: domains: Mark fwnodes when their powerdomain is added/removed
irqdomain: Mark fwnodes when their irqdomain is added/removed
driver core: fw_devlink: Handle suppliers that don't use driver core
of: property: Add fw_devlink support for optional properties
driver core: Add fw_devlink.strict kernel param
of: property: Don't add links to absent suppliers
driver core: fw_devlink: Detect supplier devices that will never be added
driver core: platform: Emit a warning if a remove callback returned non-zero
of: property: Fix fw_devlink handling of interrupts/interrupts-extended
gpiolib: Don't probe gpio_device if it's not the primary device
device.h: Remove bogus "the" in kerneldoc
gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default
...
Static code analysis reported a possible null pointer dereference
in my last commit:
cifs: Retain old ACEs when converting between mode bits and ACL.
This could happen if the DACL returned by the server is corrupted.
We were trying to continue by assuming that the file has empty DACL.
We should bail out with an error instead.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Rohith Surabattula <rohiths@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There's a small window between lookup dropping the reference to the
worker and calling wake_up_process() on the worker task, where the worker
itself could have exited. We ensure that the worker struct itself is
valid, but worker->task may very well be gone by the time we issue the
wakeup.
Fix the race by using a completion triggered by the reference going to
zero, and having exit wait for that completion before proceeding.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These races have always been there, they are just more apparent now that
we do early cancel of io-wq when the task exits.
Ensure that the io-wq manager sets task state correctly to not miss
wakeups for task creation. This is important if we get a wakeup after
having marked ourselves as TASK_INTERRUPTIBLE. If we do end up creating
workers, then we flip the state back to running, making the subsequent
schedule() a no-op. Also increment the wq ref count before forking the
thread, to avoid a use-after-free.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the task ends up doing no IO, the context list is empty and we don't
call into __io_uring_files_cancel() when the task exits. This can cause
a leak of the io-wq structures.
Ensure we always call __io_uring_files_cancel(), even if the task
context list is empty.
Fixes: 5aa75ed5b9 ("io_uring: tie async worker side to the task context")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
At this point we're only using it for memory accounting, so there's no
need to have an extra ->limit_mem - we can just set ->user if we do
the accounting, or leave it at NULL if we don't.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're now just using fork like we would from userspace, so there's no
need to try and impose extra restrictions or accounting on the user
side of things. That's already being done for us. That also means we
don't have to pass in the user_struct anymore, that's correctly inherited
through ->creds on fork.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A few reasons to do this:
- The naming of the manager and worker have changed. That's a user visible
change, so makes sense to flag it.
- Opening certain files that use ->signal (like /proc/self or /dev/tty)
now works, and the flag tells the application upfront that this is the
case.
- Related to the above, using signalfd will now work as well.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't forget to zero locked_free_nr, it's not a disaster but makes it
attempting to flush it with extra locking when there is nothing in the
list. Also, don't traverse a potentially long list freeing requests
under spinlock, splice the list and do it afterwards.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we're exiting the ring, just let the IO fail with -EAGAIN as nobody
will care anyway. It's not the right context to reissue from.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Don't use a kthread for SQPOLL, use a forked worker just like the io-wq
workers. With that done, we can drop the various context grabbing we do
for SQPOLL, it already has everything it needs.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Log space and revoke accounting rework to fix some failed asserts.
* Local resource group glock sharing for better local performance.
* Add support for version 1802 filesystems: trusted xattr support and
'-o rgrplvb' mounts by default.
* Actually synchronize on the inode glock's FREEING bit during withdraw
("gfs2: fix glock confusion in function signal_our_withdraw").
* Fix parallel recovery of multiple journals ("gfs2: keep bios separate
for each journal").
* Various other bug fixes.
-----BEGIN PGP SIGNATURE-----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=45VG
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Log space and revoke accounting rework to fix some failed asserts.
- Local resource group glock sharing for better local performance.
- Add support for version 1802 filesystems: trusted xattr support and
'-o rgrplvb' mounts by default.
- Actually synchronize on the inode glock's FREEING bit during withdraw
("gfs2: fix glock confusion in function signal_our_withdraw").
- Fix parallel recovery of multiple journals ("gfs2: keep bios separate
for each journal").
- Various other bug fixes.
* tag 'gfs2-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (49 commits)
gfs2: Don't get stuck with I/O plugged in gfs2_ail1_flush
gfs2: Per-revoke accounting in transactions
gfs2: Rework the log space allocation logic
gfs2: Minor calc_reserved cleanup
gfs2: Use resource group glock sharing
gfs2: Allow node-wide exclusive glock sharing
gfs2: Add local resource group locking
gfs2: Add per-reservation reserved block accounting
gfs2: Rename rs_{free -> requested} and rd_{reserved -> requested}
gfs2: Check for active reservation in gfs2_release
gfs2: Don't search for unreserved space twice
gfs2: Only pass reservation down to gfs2_rbm_find
gfs2: Also reflect single-block allocations in rgd->rd_extfail_pt
gfs2: Recursive gfs2_quota_hold in gfs2_iomap_end
gfs2: Add trusted xattr support
gfs2: Enable rgrplvb for sb_fs_format 1802
gfs2: Don't skip dlm unlock if glock has an lvb
gfs2: Lock imbalance on error path in gfs2_recover_one
gfs2: Move function gfs2_ail_empty_tr
gfs2: Get rid of current_tail()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
In gfs2_ail1_flush, we're using I/O plugging to give the block layer a
better chance of merging I/O requests. If we're too aggressive here, we
can end up waiting on I/O to complete while still plugged. Fix that in
a way similar to writeback_sb_inodes, except that we can't use
blk_flush_plug because blk_flush_plug_list is not exported.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
syzbot is hitting WARN_ON(pstore_sb != sb) at pstore_kill_sb() [1], for the
assumption that pstore_sb != NULL is wrong because pstore_fill_super() will
not assign pstore_sb = sb when new_inode() for d_make_root() returned NULL
(due to memory allocation fault injection).
Since mount_single() calls pstore_kill_sb() when pstore_fill_super()
failed, pstore_kill_sb() needs to be aware of such failure path.
[1] https://syzkaller.appspot.com/bug?id=6abacb8da5137cb47a416f2bef95719ed60508a0
Reported-by: syzbot <syzbot+d0cf0ad6513e9a1da5df@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210214031307.57903-1-penguin-kernel@I-love.SAKURA.ne.jp
1) sscanf() return value needs to be checked, damnit
2) sscanf() is perfectly capable of checking for fixed prefix,
no need for that %13s + strncmp with constant string.
3) st->extension is a valid string; no need for voodoo with
str*cpy() there.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Trivial change to clarify code in smb2_is_network_name_deleted
Suggested-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When server returns error STATUS_NETWORK_NAME_DELETED, TCON
must be marked for reconnect. So, subsequent IO does the tree
connect again.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With cifsacl, when a file/dir ownership is transferred (chown/chgrp),
the ACEs in the DACL for that file will need to replace the old owner
SIDs with the new owner SID.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When cifsacl mount option is used, retain the ACEs which
should not be modified during chmod. Following is the approach taken:
1. Retain all explicit (non-inherited) ACEs, unless the SID is one
of owner/group/everyone/authenticated-users. We're going to set new
ACEs for these SIDs anyways.
2. At the end of the list of explicit ACEs, place the new list of
ACEs obtained by necessary conversion/encoding.
3. Once the converted/encoded ACEs are set, copy all the remaining
ACEs (inherited) into the new ACL.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A two line fix which I made while testing my prev fix with
cifsacl mode conversions seem to have gone missing in the final fix
that was submitted. This is that fix.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
/proc/fs/cifs/DebugData called the ip address for server sessions
"Name" which is confusing since it is not a hostname. Change
this field name to "Address" and for the list of servers add
new field "Hostname" which is populated from the hostname used
to connect to the server. See below. And also don't print
[NONE] when the interface list is empty as it is not clear
what 'NONE' referred to.
Servers:
1) ConnectionId: 0x1 Hostname: localhost
Number of credits: 389 Dialect 0x311
TCP status: 1 Instance: 1
Local Users To Server: 1 SecMode: 0x1 Req On Wire: 0
In Send: 0 In MaxReq Wait: 0
Sessions:
1) Address: 127.0.0.1
...
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
ses->serverName is not the server name, but the string form
of the ip address of the server. Change the name to ip_addr
to avoid confusion (and fix the array length to match
maximum length of ipv6 address).
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
- replace mm/frame_vector.c by get_user_pages in misc/habana and
drm/exynos drivers, then move that into media as it's sole user
- close race in generic_access_phys
- s390 pci ioctl fix of this series landed in 5.11 already
- properly revoke iomem mappings (/dev/mem, pci files)
-----BEGIN PGP SIGNATURE-----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=lQoR
-----END PGP SIGNATURE-----
Merge tag 'topic/iomem-mmap-vs-gup-2021-02-22' of git://anongit.freedesktop.org/drm/drm
Pull follow_pfn() updates from Daniel Vetter:
"Fixes around VM_FPNMAP and follow_pfn:
- replace mm/frame_vector.c by get_user_pages in misc/habana and
drm/exynos drivers, then move that into media as it's sole user
- close race in generic_access_phys
- s390 pci ioctl fix of this series landed in 5.11 already
- properly revoke iomem mappings (/dev/mem, pci files)"
* tag 'topic/iomem-mmap-vs-gup-2021-02-22' of git://anongit.freedesktop.org/drm/drm:
PCI: Revoke mappings like devmem
PCI: Also set up legacy files only after sysfs init
sysfs: Support zapping of binary attr mmaps
resource: Move devmem revoke code to resource framework
/dev/mem: Only set filp->f_mapping
PCI: Obey iomem restrictions for procfs mmap
mm: Close race in generic_access_phys
media: videobuf2: Move frame_vector into media subsystem
mm/frame-vector: Use FOLL_LONGTERM
misc/habana: Use FOLL_LONGTERM for userptr
misc/habana: Stop using frame_vector helpers
drm/exynos: Use FOLL_LONGTERM for g2d cmdlists
drm/exynos: Stop using frame_vector helpers
drm userspaces uses this, systemd uses this, makes sense to pull it
out from the checkpoint-restore bundle. Kees reviewed this from
security pov and is happy with the final version.
LWN coverage: https://lwn.net/Articles/845448/
-----BEGIN PGP SIGNATURE-----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=uiSj
-----END PGP SIGNATURE-----
Merge tag 'topic/kcmp-kconfig-2021-02-22' of git://anongit.freedesktop.org/drm/drm
Pull kcmp kconfig update from Daniel Vetter:
"Make the kcmp syscall available independently of checkpoint/restore.
drm userspaces uses this, systemd uses this, so makes sense to pull it
out from the checkpoint-restore bundle.
Kees reviewed this from security pov and is happy with the final
version"
Link: https://lwn.net/Articles/845448/
* tag 'topic/kcmp-kconfig-2021-02-22' of git://anongit.freedesktop.org/drm/drm:
kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTORE
- Cork the socket while there are queued replies
Fixes:
- DRC shutdown ordering
- svc_rdma_accept() lockdep splat
-----BEGIN PGP SIGNATURE-----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=+R4U
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull more nfsd updates from Chuck Lever:
"Here are a few additional NFSD commits for the merge window:
Optimization:
- Cork the socket while there are queued replies
Fixes:
- DRC shutdown ordering
- svc_rdma_accept() lockdep splat"
* tag 'nfsd-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Further clean up svc_tcp_sendmsg()
SUNRPC: Remove redundant socket flags from svc_tcp_sendmsg()
SUNRPC: Use TCP_CORK to optimise send performance on the server
svcrdma: Hold private mutex while invoking rdma_accept()
nfsd: register pernet ops last, unregister first
handling improvements to avoid grabbing mmap_lock in some code paths
and deal with capsnaps better and a mount option cleanup.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmAzuGwTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzixPqB/9kQxU8IkCF0wOm+dm0tBW3PjYxBFuz
HryHU6WJHDbX9/enH6PgMj6ZpRwxgzDq8xUpmRKVeaPflej9PnfQyH/On+vQWRUX
WyWyBx0QqbrKYvYK0cCjHzVC5kbtBA8C/1OSSs5EkJIh518RBMkeru9pYL7+TI5x
zeQVXzOJB2Bz7y8Odd2RjlkAkix/J1m0LIggRaoWrTygz93PKXfjzhDpa4KC4WZj
W6LjnYPpYjo34poKx/3N3ZSgGP+Y3F7ZDeNfSnPB2WKs7vzcYUCpWXBSHnHTz+lK
H2O5GdmxQ6BFp4SZvYtf5e78igH/m/QmzAYGW2EmmKttOcyrb2282snb
=8MQu
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.12-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"With netfs helper library and fscache rework delayed, just a few cap
handling improvements to avoid grabbing mmap_lock in some code paths
and deal with capsnaps better and a mount option cleanup"
* tag 'ceph-for-5.12-rc1' of git://github.com/ceph/ceph-client:
ceph: defer flushing the capsnap if the Fb is used
libceph: remove osdtimeout option entirely
libceph: deprecate [no]cephx_require_signatures options
ceph: allow queueing cap/snap handling after putting cap references
ceph: clean up inode work queueing
ceph: fix flush_snap logic after putting caps
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmAzo34ACgkQnJ2qBz9k
QNmsUwf8DFq8Uu2PI2BFOzHkEG6F3y+/KPpja9k08q3A1NSM28RYBaFeWc9wGImZ
jtu3k1+8TiK51OkYGxa5LeIKpaMZrylEGXhdYTyfBJiJSHrjApWiq1jsCvtxk/xt
3pjI9+OItwmZVo/INYAWS8+QdweX87PkaZtKi0//pqgFdnsjMCKDUxkCIB3IEigk
I7orTiBpTSgP3iwcuRhchyyCFjIeoW+L2nbNuv8CYjXo9WIAF5ypQx+r1T2f1Ieu
Vt9u41gwRUYfn3a5YdKMJZgAkcv7a4QYP4+tbSnD9Wl3jtorCBgTC6EDUyGNWqdr
lqRIJ0jp1ET387J/YAGCGFsdz1AIjw==
=YTNN
-----END PGP SIGNATURE-----
Merge tag 'fs_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull isofs, udf, and quota updates from Jan Kara:
"Several udf, isofs, and quota fixes"
* tag 'fs_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
parser: Fix kernel-doc markups
udf: handle large user and group ID
isofs: handle large user and group ID
parser: add unsigned int parser
udf: fix silent AED tagLocation corruption
isofs: release buffer head before return
quota: Fix memory leak when handling corrupted quota file
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmAzolwACgkQnJ2qBz9k
QNnwAQgAhw7PYZgRGnhm/VEDBD1EiPqNIhV3+EuUcNHlrNERx0jPN3bcoXmJD7FE
PCCwbsYtQyqjYFipuzvBnUur5s7CxrwyDhvE8bgYdOB43Gy94awwvwF+JbMnBaPj
gZSvArKD7ISAUpt560jtH5KedNAZnDkPITePME2GQsOpZ9SHHjsJEhSheTaHk0t1
03Odx6gK5CcRvRD4KQYTa/hvZH95dVHSdakgFODAUoyfR65KMLhBihNOVHZsEVEZ
S99j0YBY15nxS8ygo+Iz3Y3KOzy9G1xRAzk3wSeDGzhNRfzYP/IIZWWY/KWowmvH
afx0pa0KiYjgqDpDjsyYPOJ2Ul4cPA==
=gXlh
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify update from Jan Kara:
"Make inotify groups be charged against appropriate memcgs"
* tag 'fsnotify_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
inotify, memcg: account inotify instances to kmemcg
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmAzoWUACgkQnJ2qBz9k
QNnFgQgAlng0JOzeCQvLpwweqFl0FCxYbOsZXC1xDyvfX3TiA6A6oiOR4tx3uhQN
cOQmJXaiMn4oCXjD1j6WZwGfy23yx0XchaoFK9jy2IqodaB/zUjkiWYYqt0G3XIX
ud35mxjLAGS12BCD0c+vHy2RMsUFl5ep+5aBHRHZJJhCcYbl7e5ctXZ3xB1Q0mgI
r639gD8JhH3ICdu9W0NaMvqOrVhJFNmhSGATKL/N96+oKub2x2ycYE4L2OXegxy3
mnFf26LjA8jt7K+KfHloTvkC6D4HVnnvKFvKiIbGKafiWhAE7q57ZO6BPCMajGue
3UHIhWGmwKXRU72+nW6N+089GbcO/g==
=1e+z
-----END PGP SIGNATURE-----
Merge tag 'lazytime_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull lazytime updates from Jan Kara:
"Cleanups of the lazytime handling in the writeback code making rules
for calling ->dirty_inode() filesystem handlers saner"
* tag 'lazytime_for_v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext4: simplify i_state checks in __ext4_update_other_inode_time()
gfs2: don't worry about I_DIRTY_TIME in gfs2_fsync()
fs: improve comments for writeback_single_inode()
fs: drop redundant check from __writeback_single_inode()
fs: clean up __mark_inode_dirty() a bit
fs: pass only I_DIRTY_INODE flags to ->dirty_inode
fs: don't call ->dirty_inode for lazytime timestamp updates
fat: only specify I_DIRTY_TIME when needed in fat_update_time()
fs: only specify I_DIRTY_TIME when needed in generic_update_time()
fs: correctly document the inode dirty flags
- Improve file deletion performance with dirsync mount option.
- fix shift-out-of-bounds in exfat_fill_super() generated by syzkaller.
-----BEGIN PGP SIGNATURE-----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=kzJV
-----END PGP SIGNATURE-----
Merge tag 'exfat-for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- improve file deletion performance with dirsync mount option
- fix shift-out-of-bounds in exfat_fill_super() reported by syzkaller
* tag 'exfat-for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: improve performance of exfat_free_cluster when using dirsync mount option
exfat: fix shift-out-of-bounds in exfat_fill_super()
Two patches in this pull request:
* A fix that did not make it in time for 5.11, to correct the file size
initialization of full sequential zone, from Shin'ichiro
* Add file operation tracepoints to help with debugging, from Johannes
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYDLicAAKCRDdoc3SxdoY
dpN4AQCh1EbZ3NvHRJ4bMWnNQ3OsdkTWYix7ur3C/5Ft7oQbKQEAge6cUgIjEkrD
u3znsZSYE/RM+LxrhE1RquTwERkSeQk=
=StDj
-----END PGP SIGNATURE-----
Merge tag 'zonefs-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs updates from Damien Le Moal:
"Two changes:
- A fix that did not make it in time for 5.11, to correct the file
size initialization of full sequential zone, from Shin'ichiro
- Add file operation tracepoints to help with debugging, from
Johannes"
* tag 'zonefs-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Fix file size of zones in full condition
zonefs: add tracepoints for file operations
Pull RCU-safe common_lsm_audit() from Al Viro:
"Make common_lsm_audit() non-blocking and usable from RCU pathwalk
context.
We don't really need to grab/drop dentry in there - rcu_read_lock() is
enough. There's a couple of followups using that to simplify the
logics in selinux, but those hadn't soaked in -next yet, so they'll
have to go in next window"
* 'work.audit' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
make dump_common_audit_data() safe to be called from RCU pathwalk
new helper: d_find_alias_rcu()
Pull d_name whack-a-mole from Al Viro:
"A bunch of places that play with ->d_name in printks instead of using
proper formats..."
* 'work.d_name' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
orangefs_file_mmap(): use %pD
cifs_debug: use %pd instead of messing with ->d_name
erofs: use %pd instead of messing with ->d_name
cramfs: use %pD instead of messing with file_dentry()->d_name
In the log, revokes are stored as a revoke descriptor (struct
gfs2_log_descriptor), followed by zero or more additional revoke blocks
(struct gfs2_meta_header). On filesystems with a blocksize of 4k, the
revoke descriptor contains up to 503 revokes, and the metadata blocks
contain up to 509 revokes each. We've so far been reserving space for
revokes in transactions in block granularity, so a lot more space than
necessary was being allocated and then released again.
This patch switches to assigning revokes to transactions individually
instead. Initially, space for the revoke descriptor is reserved and
handed out to transactions. When more revokes than that are reserved,
additional revoke blocks are added. When the log is flushed, the space
for the additional revoke blocks is released, but we keep the space for
the revoke descriptor block allocated.
Transactions may still reserve more revokes than they will actually need
in the end, but now we won't overshoot the target as much, and by only
returning the space for excess revokes at log flush time, we further
reduce the amount of contention between processes.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The current log space allocation logic is hard to understand or extend.
The principle it that when the log is flushed, we may or may not have a
transaction active that has space allocated in the log. To deal with
that, we set aside a magical number of blocks to be used in case we
don't have an active transaction. It isn't clear that the pool will
always be big enough. In addition, we can't return unused log space at
the end of a transaction, so the number of blocks allocated must exactly
match the number of blocks used.
Simplify this as follows:
* When transactions are allocated or merged, always reserve enough
blocks to flush the transaction (err on the safe side).
* In gfs2_log_flush, return any allocated blocks that haven't been used.
* Maintain a pool of spare blocks big enough to do one log flush, as
before.
* In gfs2_log_flush, when we have no active transaction, allocate a
suitable number of blocks. For that, use the spare pool when
called from logd, and leave the pool alone otherwise. This means
that when the log is almost full, logd will still be able to do one
more log flush, which will result in more log space becoming
available.
This will make the log space allocator code easier to work with in
the future.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
- As promised, the minimum Sphinx version to build the docs is now 1.7,
and we have dropped support for Python 2 entirely. That allowed the
removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from relative
paths to RST files.
- More translations, typo fixes, and warning fixes.
No conflicts with any other tree as far as I know.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmAq4EUPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YTIAH/1I5MlVQwuvNKjwCAEdmltQgHv6SmXSpDkrp
SGuviWVXxqz8dTyo7C2R12qE/7nP8zGAmclNdX78ynl5qWaj05lQsjBgMYSoQO/F
+akyLQSL8/8SQrtDPPBcboPuIz9DzkX51kkQthvCf0puJi0ScKVHO9Sk9SKUgDoK
cnCE9VwpGL7YX/ee2wt91UYREijgJ9P7eQ6rqKvUZ5Itu9ikfu9vQU41GR9tOXDK
MQK+k38pWdl8wRgTgA0pkVhMf1G732bxTTicvFHXcyqmCkh7++m2+ysT8O+SBBMX
e5BbP0yysSqThjwFHOW5PWM1AWD5iVz+pnwJwEaJ4K76tJJOw9M=
=bcDk
-----END PGP SIGNATURE-----
Merge tag 'docs-5.12' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"It has been a relatively quiet cycle in docsland.
- As promised, the minimum Sphinx version to build the docs is now
1.7, and we have dropped support for Python 2 entirely. That
allowed the removal of a bunch of compatibility code.
- A set of treewide warning fixups from Mauro that I applied after it
became clear nobody else was going to deal with them.
- The automarkup mechanism can now create cross-references from
relative paths to RST files.
- More translations, typo fixes, and warning fixes"
* tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits)
docs: kernel-hacking: be more civil
docs: Remove the Microsoft rhetoric
Documentation/admin-guide: kernel-parameters: Update nohlt section
doc/admin-guide: fix spelling mistake: "perfomance" -> "performance"
docs: Document cross-referencing using relative path
docs: Enable usage of relative paths to docs on automarkup
docs: thermal: fix spelling mistakes
Documentation: admin-guide: Update kvm/xen config option
docs: Make syscalls' helpers naming consistent
coding-style.rst: Avoid comma statements
Documentation: /proc/loadavg: add 3 more field descriptions
Documentation/submitting-patches: Add blurb about backtraces in commit messages
Docs: drop Python 2 support
Move our minimum Sphinx version to 1.7
Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams
scripts/kernel-doc: add internal hyperlink to DOC: sections
Update Documentation/admin-guide/sysctl/fs.rst
docs: Update DTB format references
docs: zh_CN: add iio index.rst translation
docs/zh_CN: add iio ep93xx_adc.rst translation
...
Lockdep with fstests test case btrfs/041 detected a unsafe locking
scenario when we allocate the log node on a zoned filesystem.
btrfs/041
============================================
WARNING: possible recursive locking detected
5.11.0-rc7+ #939 Not tainted
--------------------------------------------
xfs_io/698 is trying to acquire lock:
ffff88810cd673a0 (&root->log_mutex){+.+.}-{3:3}, at: btrfs_sync_log+0x3d1/0xee0 [btrfs]
but task is already holding lock:
ffff88810b0fc3a0 (&root->log_mutex){+.+.}-{3:3}, at: btrfs_sync_log+0x313/0xee0 [btrfs]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&root->log_mutex);
lock(&root->log_mutex);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by xfs_io/698:
#0: ffff88810cd66620 (sb_internal){.+.+}-{0:0}, at: btrfs_sync_file+0x2c3/0x570 [btrfs]
#1: ffff88810b0fc3a0 (&root->log_mutex){+.+.}-{3:3}, at: btrfs_sync_log+0x313/0xee0 [btrfs]
stack backtrace:
CPU: 0 PID: 698 Comm: xfs_io Not tainted 5.11.0-rc7+ #939
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0x77/0x97
__lock_acquire.cold+0xb9/0x32a
lock_acquire+0xb5/0x400
? btrfs_sync_log+0x3d1/0xee0 [btrfs]
__mutex_lock+0x7b/0x8d0
? btrfs_sync_log+0x3d1/0xee0 [btrfs]
? btrfs_sync_log+0x3d1/0xee0 [btrfs]
? find_first_extent_bit+0x9f/0x100 [btrfs]
? __mutex_unlock_slowpath+0x35/0x270
btrfs_sync_log+0x3d1/0xee0 [btrfs]
btrfs_sync_file+0x3a8/0x570 [btrfs]
__x64_sys_fsync+0x34/0x60
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This happens, because we are taking the ->log_mutex albeit it has already
been locked.
Also while at it, fix the bogus unlock of the tree_log_mutex in the error
handling.
Fixes: 3ddebf27fc ("btrfs: zoned: reorder log node allocation on zoned filesystem")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's wrong calling btrfs_put_block_group in
__btrfs_return_cluster_to_free_space if the block group passed is
different than the block group the cluster represents. As this means the
cluster doesn't have a reference to the passed block group. This results
in double put and a use-after-free bug.
Fix this by simply bailing if the block group we passed in does not
match the block group on the cluster.
Fixes: fa9c0d795f ("Btrfs: rework allocation clustering")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
When using the NO_HOLES feature, if we clone a file range that spans only
a hole into a range that is at or beyond the current i_size of the
destination file, we end up not setting the full sync runtime flag on the
inode. As a result, if we then fsync the destination file and have a power
failure, after log replay we can end up exposing stale data instead of
having a hole for that range.
The conditions for this to happen are the following:
1) We have a file with a size of, for example, 1280K;
2) There is a written (non-prealloc) extent for the file range from 1024K
to 1280K with a length of 256K;
3) This particular file extent layout is durably persisted, so that the
existing superblock persisted on disk points to a subvolume root where
the file has that exact file extent layout and state;
4) The file is truncated to a smaller size, to an offset lower than the
start offset of its last extent, for example to 800K. The truncate sets
the full sync runtime flag on the inode;
6) Fsync the file to log it and clear the full sync runtime flag;
7) Clone a region that covers only a hole (implicit hole due to NO_HOLES)
into the file with a destination offset that starts at or beyond the
256K file extent item we had - for example to offset 1024K;
8) Since the clone operation does not find extents in the source range,
we end up in the if branch at the bottom of btrfs_clone() where we
punch a hole for the file range starting at offset 1024K by calling
btrfs_replace_file_extents(). There we end up not setting the full
sync flag on the inode, because we don't know we are being called in
a clone context (and not fallocate's punch hole operation), and
neither do we create an extent map to represent a hole because the
requested range is beyond eof;
9) A further fsync to the file will be a fast fsync, since the clone
operation did not set the full sync flag, and therefore it relies on
modified extent maps to correctly log the file layout. But since
it does not find any extent map marking the range from 1024K (the
previous eof) to the new eof, it does not log a file extent item
for that range representing the hole;
10) After a power failure no hole for the range starting at 1024K is
punched and we end up exposing stale data from the old 256K extent.
Turning this into exact steps:
$ mkfs.btrfs -f -O no-holes /dev/sdi
$ mount /dev/sdi /mnt
# Create our test file with 3 extents of 256K and a 256K hole at offset
# 256K. The file has a size of 1280K.
$ xfs_io -f -s \
-c "pwrite -S 0xab -b 256K 0 256K" \
-c "pwrite -S 0xcd -b 256K 512K 256K" \
-c "pwrite -S 0xef -b 256K 768K 256K" \
-c "pwrite -S 0x73 -b 256K 1024K 256K" \
/mnt/sdi/foobar
# Make sure it's durably persisted. We want the last committed super
# block to point to this particular file extent layout.
sync
# Now truncate our file to a smaller size, falling within a position of
# the second extent. This sets the full sync runtime flag on the inode.
# Then fsync the file to log it and clear the full sync flag from the
# inode. The third extent is no longer part of the file and therefore
# it is not logged.
$ xfs_io -c "truncate 800K" -c "fsync" /mnt/foobar
# Now do a clone operation that only clones the hole and sets back the
# file size to match the size it had before the truncate operation
# (1280K).
$ xfs_io \
-c "reflink /mnt/foobar 256K 1024K 256K" \
-c "fsync" \
/mnt/foobar
# File data before power failure:
$ od -A d -t x1 /mnt/foobar
0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
*
0262144 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0524288 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd
*
0786432 ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef
*
0819200 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
1310720
<power fail>
# Mount the fs again to replay the log tree.
$ mount /dev/sdi /mnt
# File data after power failure:
$ od -A d -t x1 /mnt/foobar
0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
*
0262144 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0524288 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd
*
0786432 ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef
*
0819200 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
1048576 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73
*
1310720
The range from 1024K to 1280K should correspond to a hole but instead it
points to stale data, to the 256K extent that should not exist after the
truncate operation.
The issue does not exists when not using NO_HOLES, because for that case
we use file extent items to represent holes, these are found and copied
during the loop that iterates over extents at btrfs_clone(), and that
causes btrfs_replace_file_extents() to be called with a non-NULL
extent_info argument and therefore set the full sync runtime flag on the
inode.
So fix this by making the code that deals with a trailing hole during
cloning, at btrfs_clone(), to set the full sync flag on the inode, if the
range starts at or beyond the current i_size.
A test case for fstests will follow soon.
Backporting notes: for kernel 5.4 the change goes to ioctl.c into
btrfs_clone before the last call to btrfs_punch_hole_range.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The tree checker checks the extent ref hash at read and write time to
make sure we do not corrupt the file system. Generally extent
references go inline, but if we have enough of them we need to make an
item, which looks like
key.objectid = <bytenr>
key.type = <BTRFS_EXTENT_DATA_REF_KEY|BTRFS_TREE_BLOCK_REF_KEY>
key.offset = hash(tree, owner, offset)
However if key.offset collide with an unrelated extent reference we'll
simply key.offset++ until we get something that doesn't collide.
Obviously this doesn't match at tree checker time, and thus we error
while writing out the transaction. This is relatively easy to
reproduce, simply do something like the following
xfs_io -f -c "pwrite 0 1M" file
offset=2
for i in {0..10000}
do
xfs_io -c "reflink file 0 ${offset}M 1M" file
offset=$(( offset + 2 ))
done
xfs_io -c "reflink file 0 17999258914816 1M" file
xfs_io -c "reflink file 0 35998517829632 1M" file
xfs_io -c "reflink file 0 53752752058368 1M" file
btrfs filesystem sync
And the sync will error out because we'll abort the transaction. The
magic values above are used because they generate hash collisions with
the first file in the main subvol.
The fix for this is to remove the hash value check from tree checker, as
we have no idea which offset ours should belong to.
Reported-by: Tuomas Lähdekorpi <tuomas.lahdekorpi@gmail.com>
Fixes: 0785a9aacf ("btrfs: tree-checker: Add EXTENT_DATA_REF check")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment]
Signed-off-by: David Sterba <dsterba@suse.com>
When creating a snapshot we check if the current number of swap files, in
the root, is non-zero, and if it is, we error out and warn that we can not
create the snapshot because there are active swap files.
However this is racy because when a task started activation of a swap
file, another task might have started already snapshot creation and might
have seen the counter for the number of swap files as zero. This means
that after the swap file is activated we may end up with a snapshot of the
same root successfully created, and therefore when the first write to the
swap file happens it has to fall back into COW mode, which should never
happen for active swap files.
Basically what can happen is:
1) Task A starts snapshot creation and enters ioctl.c:create_snapshot().
There it sees that root->nr_swapfiles has a value of 0 so it continues;
2) Task B enters btrfs_swap_activate(). It is not aware that another task
started snapshot creation but it did not finish yet. It increments
root->nr_swapfiles from 0 to 1;
3) Task B checks that the file meets all requirements to be an active
swap file - it has NOCOW set, there are no snapshots for the inode's
root at the moment, no file holes, no reflinked extents, etc;
4) Task B returns success and now the file is an active swap file;
5) Task A commits the transaction to create the snapshot and finishes.
The swap file's extents are now shared between the original root and
the snapshot;
6) A write into an extent of the swap file is attempted - there is a
snapshot of the file's root, so we fall back to COW mode and therefore
the physical location of the extent changes on disk.
So fix this by taking the snapshot lock during swap file activation before
locking the extent range, as that is the order in which we lock these
during buffered writes.
Fixes: ed46ff3d42 ("Btrfs: support swap files")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When we active a swap file, at btrfs_swap_activate(), we acquire the
exclusive operation lock to prevent the physical location of the swap
file extents to be changed by operations such as balance and device
replace/resize/remove. We also call there can_nocow_extent() which,
among other things, checks if the block group of a swap file extent is
currently RO, and if it is we can not use the extent, since a write
into it would result in COWing the extent.
However we have no protection against a scrub operation running after we
activate the swap file, which can result in the swap file extents to be
COWed while the scrub is running and operating on the respective block
group, because scrub turns a block group into RO before it processes it
and then back again to RW mode after processing it. That means an attempt
to write into a swap file extent while scrub is processing the respective
block group, will result in COWing the extent, changing its physical
location on disk.
Fix this by making sure that block groups that have extents that are used
by active swap files can not be turned into RO mode, therefore making it
not possible for a scrub to turn them into RO mode. When a scrub finds a
block group that can not be turned to RO due to the existence of extents
used by swap files, it proceeds to the next block group and logs a warning
message that mentions the block group was skipped due to active swap
files - this is the same approach we currently use for balance.
Fixes: ed46ff3d42 ("Btrfs: support swap files")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During the nocow writeback path, we currently iterate the rbtree of block
groups twice: once for checking if the target block group is RO with the
call to btrfs_extent_readonly()), and once again for getting a nocow
reference on the block group with a call to btrfs_inc_nocow_writers().
Since btrfs_inc_nocow_writers() already returns false when the target
block group is RO, remove the call to btrfs_extent_readonly(). Not only
we avoid searching the blocks group rbtree twice, it also helps reduce
contention on the lock that protects it (specially since it is a spin
lock and not a read-write lock). That may make a noticeable difference
on very large filesystems, with thousands of allocated block groups.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During allocation the allocator will try to allocate an extent using
cluster policy. Once the current cluster is exhausted it will remove the
entry under btrfs_free_cluster::lock and subsequently acquire
btrfs_free_space_ctl::tree_lock to dispose of the already-deleted entry
and adjust btrfs_free_space_ctl::total_bitmap. This poses a problem
because there exists a race condition between removing the entry under
one lock and doing the necessary accounting holding a different lock
since extent freeing only uses the 2nd lock. This can result in the
following situation:
T1: T2:
btrfs_alloc_from_cluster insert_into_bitmap <holds tree_lock>
if (entry->bytes == 0) if (block_group && !list_empty(&block_group->cluster_list)) {
rb_erase(entry)
spin_unlock(&cluster->lock);
(total_bitmaps is still 4) spin_lock(&cluster->lock);
<doesn't find entry in cluster->root>
spin_lock(&ctl->tree_lock); <goes to new_bitmap label, adds
<blocked since T2 holds tree_lock> <a new entry and calls add_new_bitmap>
recalculate_thresholds <crashes,
due to total_bitmaps
becoming 5 and triggering
an ASSERT>
To fix this ensure that once depleted, the cluster entry is deleted when
both cluster lock and tree locks are held in the allocator (T1), this
ensures that even if there is a race with a concurrent
insert_into_bitmap call it will correctly find the entry in the cluster
and add the new space to it.
CC: <stable@vger.kernel.org> # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently check_compressed_csum() completely relies on sectorsize ==
PAGE_SIZE to do checksum verification for compressed extents.
To make it subpage compatible, this patch will:
- Do extra calculation for the csum range
Since we have multiple sectors inside a page, we need to only hash
the range we want, not the full page anymore.
- Do sector-by-sector hash inside the page
With this patch and previous conversion on
btrfs_submit_compressed_read(), now we can read subpage compressed
extents properly, and do proper csum verification.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For compressed read, we always submit page read using page size. This
doesn't work well with subpage, as for subpage one page can contain
several sectors. Such submission will read range out of what we want,
and cause problems.
Thankfully to make it subpage compatible, we only need to change how the
last page of the compressed extent is read.
Instead of always adding a full page to the compressed read bio, if we're
at the last page, calculate the size using compressed length, so that we
only add part of the range into the compressed read bio.
Since we are here, also change the PAGE_SIZE used in
lookup_extent_mapping() to sectorsize.
This modification won't cause any functional change, as
lookup_extent_mapping() can handle the case where the search range is
larger than found extent range.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a qstripe is required an extra page is allocated and mapped. There
were 3 problems:
1) There is no corresponding call of kunmap() for the qstripe page.
2) There is no reason to map the qstripe page more than once if the
number of bits set in rbio->dbitmap is greater than one.
3) There is no reason to map the parity page and unmap it each time
through the loop.
The page memory can continue to be reused with a single mapping on each
iteration by raid6_call.gen_syndrome() without remapping. So map the
page for the duration of the loop.
Similarly, improve the algorithm by mapping the parity page just 1 time.
Fixes: 5a6ac9eacb ("Btrfs, raid56: support parity scrub on raid56")
CC: stable@vger.kernel.org # 4.4.x: c17af96554a8: btrfs: raid56: simplify tracking of Q stripe presence
CC: stable@vger.kernel.org # 4.4.x
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
syzbot reported a warning which could cause shift-out-of-bounds issue.
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x183/0x22e lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
exfat_read_boot_sector fs/exfat/super.c:471 [inline]
__exfat_fill_super fs/exfat/super.c:556 [inline]
exfat_fill_super+0x2acb/0x2d00 fs/exfat/super.c:624
get_tree_bdev+0x406/0x630 fs/super.c:1291
vfs_get_tree+0x86/0x270 fs/super.c:1496
do_new_mount fs/namespace.c:2881 [inline]
path_mount+0x1937/0x2c50 fs/namespace.c:3211
do_mount fs/namespace.c:3224 [inline]
__do_sys_mount fs/namespace.c:3432 [inline]
__se_sys_mount+0x2f9/0x3b0 fs/namespace.c:3409
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
exfat specification describe sect_per_clus_bits field of boot sector
could be at most 25 - sect_size_bits and at least 0. And sect_size_bits
can also affect this calculation, It also needs validation.
This patch add validation for sect_per_clus_bits and sect_size_bits
field of boot sector.
Fixes: 719c1e1829 ("exfat: add super block operations")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: syzbot+da4fe66aaadd3c2e2d1c@syzkaller.appspotmail.com
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
-----BEGIN PGP SIGNATURE-----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=5fVL
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20210215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"We've got a good handful of patches for SELinux this time around; with
everything passing the selinux-testsuite and applying cleanly to your
tree as of a few minutes ago. The highlights are:
- Add support for labeling anonymous inodes, and extend this new
support to userfaultfd.
- Fallback to SELinux genfs file labeling if the filesystem does not
have xattr support. This is useful for virtiofs which can vary in
its xattr support depending on the backing filesystem.
- Classify and handle MPTCP the same as TCP in SELinux.
- Ensure consistent behavior between inode_getxattr and
inode_listsecurity when the SELinux policy is not loaded. This
fixes a known problem with overlayfs.
- A couple of patches to prune some unused variables from the SELinux
code, mark private variables as static, and mark other variables as
__ro_after_init or __read_mostly"
* tag 'selinux-pr-20210215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
fs: anon_inodes: rephrase to appropriate kernel-doc
userfaultfd: use secure anon inodes for userfaultfd
selinux: teach SELinux about anonymous inodes
fs: add LSM-supporting anon-inode interface
security: add inode_init_security_anon() LSM hook
selinux: fall back to SECURITY_FS_USE_GENFS if no xattr support
selinux: mark selinux_xfrm_refcount as __read_mostly
selinux: mark some global variables __ro_after_init
selinux: make selinuxfs_mount static
selinux: drop the unnecessary aurule_callback variable
selinux: remove unused global variables
selinux: fix inconsistency between inode_getxattr and inode_listsecurity
selinux: handle MPTCP consistently with TCP
We want to use this in io_uring proper as well, for the SQPOLL thread.
Rename it from fork_thread() to io_wq_fork_thread(), and make it
available through the io-wq.h header.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The async workers are siblings of the task itself, so by definition we
have all the state that we need. Remove any of the state grabbing that
we have, and requests flagging what they need.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Instead of using regular kthread kernel threads, create kernel threads
that are like a real thread that the task would create. This ensures that
we get all the context that we need, without having to carry that state
around. This greatly reduces the code complexity, and the risk of missing
state for a given request type.
With the move away from kthread, we can also dump everything related to
assigned state to the new threads.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We don't support attach anymore, so doesn't make sense to carry the
use_refs reference count. Get rid of it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Moving towards making the io_wq per ring per task, so we can't really
share it between rings. Which is fine, since we've now dropped some
of that fat from it.
Retain compatibility with how attaching works, so that any attempt to
attach to an fd that doesn't exist, or isn't an io_uring fd, will fail
like it did before.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the manager thread starts up, it creates a worker per node for
the given context. Just let these get created dynamically, like we do
for adding further workers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We hit this case when the task is exiting, and we need somewhere to
do background cleanup of requests. Instead of relying on the io-wq
task manager to do this work for us, just stuff it somewhere where
we can safely run it ourselves directly.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* for-5.12/io_uring: (21 commits)
io_uring: run task_work on io_uring_register()
io_uring: fix leaving invalid req->flags
io_uring: wait potential ->release() on resurrect
io_uring: keep generic rsrc infra generic
io_uring: zero ref_node after killing it
io_uring: make the !CONFIG_NET helpers a bit more robust
io_uring: don't hold uring_lock when calling io_run_task_work*
io_uring: fail io-wq submission from a task_work
io_uring: don't take uring_lock during iowq cancel
io_uring: fail links more in io_submit_sqe()
io_uring: don't do async setup for links' heads
io_uring: do io_*_prep() early in io_submit_sqe()
io_uring: split sqe-prep and async setup
io_uring: don't submit link on error
io_uring: move req link into submit_state
io_uring: move io_init_req() into io_submit_sqe()
io_uring: move io_init_req()'s definition
io_uring: don't duplicate ->file check in sfr
io_uring: keep io_*_prep() naming consistent
io_uring: kill fictitious submit iteration index
...
Do run task_work before io_uring_register(), that might make a first
quiesce round much nicer. We generally do that for any syscall invocation
to avoid spurious -EINTR/-ERESTARTSYS, for task_work that we generate.
This patch brings io_uring_register() inline with the two other io_uring
syscalls.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
JFFS2:
- Fix for use-after-free in jffs2_sum_write_data()
- Fix for out-of-bounds access in jffs2_zlib_compress()
UBI:
- Remove dead/useless code
UBIFS:
- Fix for a memory leak in ubifs_init_authentication()
- Fix for high stack usage
- Fix for a off-by-one error in xattrs code
-----BEGIN PGP SIGNATURE-----
iQJKBAABCAA0FiEEdgfidid8lnn52cLTZvlZhesYu8EFAmAyuh8WHHJpY2hhcmRA
c2lnbWEtc3Rhci5hdAAKCRBm+VmF6xi7wT+bD/9Q2Ar9yMX9drPyAnyb3vudE8c8
l0RdNLyBSL87pskpszNZR2+o8Yi3vjlbGWq5i97JsP/7UOb4Gc/MfXPYJteP1xUN
S46EZwgcZa4XCgMSSdMk/NZl7bVdbwjvcGjw1CA4RdPkwt8s2jwYdS+hPrHu6o87
3xkP7kWShs/2KhUyvodZgAu6SYcTW+OjiKwdAIKxa1Ak9YUMGzsSHqCbl19he5MG
hMxFZIqRZ2zZUfFeYXffVApJI8eBEKVud2qtNA/A6eGsy5Wx3c4F/bxG/uWdoJPp
n5CmFRc6UGh8teA43aag5BnLv8sR9bC1Kf3lQX4nwfpBSzE7LwIMN7SVpL0JH5vT
dJdwn37JYL/RQjmjTk++O/sSgeg9jJWMG+VOSmuKWPgP6xAYEVXqWg9njuV3wl9W
NFBoybP82IyVHcthOcTrY8dx0F7A4q+3PkMy+7cikO2fYKVvJjdKgTp4pcVnGCR3
IadXzNRdYrLPvYwf25D2AyETwQQxcmh/Ox7ZOhkUXuFQ/KnhU0yqbO3cTTB1A/mO
jY2SPtXXeUZwgGpGc8Lyr8/KGZ6tJX/3jswwmg+XvdegBLRogqty8XOcwUuJszCh
1kDAKs2LJ6UaMYyhV6Jxr4c+wgHoKJG+voY+oTkrUP4Lt0hQVELCylEkX2uJo60Y
x4Gic/YbRUwnfjlAcg==
=xorv
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull JFFS2/UBIFS and UBI updates from Richard Weinberger:
"JFFS2:
- Fix for use-after-free in jffs2_sum_write_data()
- Fix for out-of-bounds access in jffs2_zlib_compress()
UBI:
- Remove dead/useless code
UBIFS:
- Fix for a memory leak in ubifs_init_authentication()
- Fix for high stack usage
- Fix for a off-by-one error in xattrs code"
* tag 'for-linus-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: Fix error return code in alloc_wbufs()
jffs2: check the validity of dstlen in jffs2_zlib_compress()
ubifs: Fix off-by-one error
ubifs: replay: Fix high stack usage, again
ubifs: Fix memleak in ubifs_init_authentication
jffs2: fix use after free in jffs2_sum_write_data()
ubi: eba: Delete useless kfree code
ubi: remove dead code in validate_vid_hdr()
- Many cleanups and fixes for our virtio code
- Add support for a pseudo RTC
- Fix for a possible jailbreak
- Minor fixes (spelling, header files)
-----BEGIN PGP SIGNATURE-----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=e5Qa
-----END PGP SIGNATURE-----
Merge tag 'for-linux-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Many cleanups and fixes for our virtio code
- Add support for a pseudo RTC
- Fix for a possible jailbreak
- Minor fixes (spelling, header files)
* tag 'for-linux-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: irq.h: include <asm-generic/irq.h>
um: io.h: include <linux/types.h>
um: add a pseudo RTC
um: remove process stub VMA
um: rework userspace stubs to not hard-code stub location
um: separate child and parent errors in clone stub
um: defer killing userspace on page table update failures
um: mm: check more comprehensively for stub changes
um: print register names in wait_for_stub
um: hostfs: use a kmem cache for inodes
mm: Remove arch_remap() and mm-arch-hooks.h
um: fix spelling mistake in Kconfig "privleges" -> "privileges"
um: virtio: allow devices to be configured for wakeup
um: time-travel: rework interrupt handling in ext mode
um: virtio: disable VQs during suspend
um: virtio: fix handling of messages without payload
um: virtio: clean up a comment
- Convert to using the generic entry infrastructure.
- Add vdso time namespace support.
- Switch s390 and alpha to 64-bit ino_t. As discussed here
lkml.kernel.org/r/YCV7QiyoweJwvN+m@osiris
- Get rid of expensive stck (store clock) usages where possible. Utilize
cpu alternatives to patch stckf when supported.
- Make tod_clock usage less error prone by converting it to a union and
rework code which is using it.
- Machine check handler fixes and cleanups.
- Drop couple of minor inline asm optimizations to fix clang build.
- Default configs changes notably to make libvirt happy.
- Various changes to rework and improve qdio code.
- Other small various fixes and improvements all over the code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmAyzcwACgkQjYWKoQLX
FBjjMwgAmeY3oMkj93bnUF/OnbYTJQ0ZHmlyeboKt7SnFyvNpOVGyRfl7+fPHsNu
+t9QZQk0f7fSxbcC04gz0ZMw1YbTjWihgZJsN6s+qtrRsv/kVqKr7kvhFrcs8uSZ
rLiwIRWGVAbprnJZWCNqaGpKkOM0wPYZ5W3Mtnoxe4nTM2LwSu2RWI8ibTGYLQPy
FybKos2hYOFBTGQdrxmg1zAvpE8DJg4qQNLhYvnmHd8Bw/FNBmoyhx8rS8z06NmS
dWMk7pfvQaslIIaFC3Yo7/sJVa/JJH33FlBonc+MSO8OZz5O6vG4bk9ZHq6DfHUH
V1I38xiBdYdSXDq8QqT3N9d+CtjeMQ==
=Lt/v
-----END PGP SIGNATURE-----
Merge tag 's390-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Convert to using the generic entry infrastructure.
- Add vdso time namespace support.
- Switch s390 and alpha to 64-bit ino_t. As discussed at
https://lore.kernel.org/linux-mm/YCV7QiyoweJwvN+m@osiris/
- Get rid of expensive stck (store clock) usages where possible.
Utilize cpu alternatives to patch stckf when supported.
- Make tod_clock usage less error prone by converting it to a union and
rework code which is using it.
- Machine check handler fixes and cleanups.
- Drop couple of minor inline asm optimizations to fix clang build.
- Default configs changes notably to make libvirt happy.
- Various changes to rework and improve qdio code.
- Other small various fixes and improvements all over the code.
* tag 's390-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (68 commits)
s390/qdio: remove 'merge_pending' mechanism
s390/qdio: improve handling of PENDING buffers for QEBSM devices
s390/qdio: rework q->qdio_error indication
s390/qdio: inline qdio_kick_handler()
s390/time: remove get_tod_clock_ext()
s390/crypto: use store_tod_clock_ext()
s390/hypfs: use store_tod_clock_ext()
s390/debug: use union tod_clock
s390/kvm: use union tod_clock
s390/vdso: use union tod_clock
s390/time: convert tod_clock_base to union
s390/time: introduce new store_tod_clock_ext()
s390/time: rename store_tod_clock_ext() and use union tod_clock
s390/time: introduce union tod_clock
s390,alpha: switch to 64-bit ino_t
s390: split cleanup_sie
s390: use r13 in cleanup_sie as temp register
s390: fix kernel asce loading when sie is interrupted
s390: add stack for machine check handler
s390: use WRITE_ONCE when re-allocating async stack
...
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU. Instead of the complex
"fast page fault" logic that is used in mmu.c, tdp_mmu.c uses an
rwlock so that page faults are concurrent, but the code that can run
against page faults is limited. Right now only page faults take the
lock for reading; in the future this will be extended to some
cases of page table destruction. I hope to switch the default MMU
around 5.12-rc3 (some testing was delayed due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmApSRgUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOc7wf9FnlinKoTFaSk7oeuuhF/CoCVwSFs
Z9+A2sNI99tWHQxFR6dyDkEFeQoXnqSxfLHtUVIdH/JnTg0FkEvFz3NK+0PzY1PF
PnGNbSoyhP58mSBG4gbBAxdF3ZJZMB8GBgYPeR62PvMX2dYbcHqVBNhlf6W4MQK4
5mAUuAnbf19O5N267sND+sIg3wwJYwOZpRZB7PlwvfKAGKf18gdBz5dQ/6Ej+apf
P7GODZITjqM5Iho7SDm/sYJlZprFZT81KqffwJQHWFMEcxFgwzrnYPx7J3gFwRTR
eeh9E61eCBDyCTPpHROLuNTVBqrAioCqXLdKOtO5gKvZI3zmomvAsZ8uXQ==
=uFZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini:
"x86:
- Support for userspace to emulate Xen hypercalls
- Raise the maximum number of user memslots
- Scalability improvements for the new MMU.
Instead of the complex "fast page fault" logic that is used in
mmu.c, tdp_mmu.c uses an rwlock so that page faults are concurrent,
but the code that can run against page faults is limited. Right now
only page faults take the lock for reading; in the future this will
be extended to some cases of page table destruction. I hope to
switch the default MMU around 5.12-rc3 (some testing was delayed
due to Chinese New Year).
- Cleanups for MAXPHYADDR checks
- Use static calls for vendor-specific callbacks
- On AMD, use VMLOAD/VMSAVE to save and restore host state
- Stop using deprecated jump label APIs
- Workaround for AMD erratum that made nested virtualization
unreliable
- Support for LBR emulation in the guest
- Support for communicating bus lock vmexits to userspace
- Add support for SEV attestation command
- Miscellaneous cleanups
PPC:
- Support for second data watchpoint on POWER10
- Remove some complex workarounds for buggy early versions of POWER9
- Guest entry/exit fixes
ARM64:
- Make the nVHE EL2 object relocatable
- Cleanups for concurrent translation faults hitting the same page
- Support for the standard TRNG hypervisor call
- A bunch of small PMU/Debug fixes
- Simplification of the early init hypercall handling
Non-KVM changes (with acks):
- Detection of contended rwlocks (implemented only for qrwlocks,
because KVM only needs it for x86)
- Allow __DISABLE_EXPORTS from assembly code
- Provide a saner follow_pfn replacements for modules"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (192 commits)
KVM: x86/xen: Explicitly pad struct compat_vcpu_info to 64 bytes
KVM: selftests: Don't bother mapping GVA for Xen shinfo test
KVM: selftests: Fix hex vs. decimal snafu in Xen test
KVM: selftests: Fix size of memslots created by Xen tests
KVM: selftests: Ignore recently added Xen tests' build output
KVM: selftests: Add missing header file needed by xAPIC IPI tests
KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
KVM: SVM: Make symbol 'svm_gp_erratum_intercept' static
locking/arch: Move qrwlock.h include after qspinlock.h
KVM: PPC: Book3S HV: Fix host radix SLB optimisation with hash guests
KVM: PPC: Book3S HV: Ensure radix guest has no SLB entries
KVM: PPC: Don't always report hash MMU capability for P9 < DD2.2
KVM: PPC: Book3S HV: Save and restore FSCR in the P9 path
KVM: PPC: remove unneeded semicolon
KVM: PPC: Book3S HV: Use POWER9 SLBIA IH=6 variant to clear SLB
KVM: PPC: Book3S HV: No need to clear radix host SLB before loading HPT guest
KVM: PPC: Book3S HV: Fix radix guest SLB side channel
KVM: PPC: Book3S HV: Remove support for running HPT guest on RPT host without mixed mode support
KVM: PPC: Book3S HV: Introduce new capability for 2nd DAWR
KVM: PPC: Book3S HV: Add infrastructure to support 2nd DAWR
...
Pull parisc updates from Helge Deller:
- Optimize parisc page table locks by using the existing
page_table_lock
- Export argv0-preserve flag in binfmt_misc for usage in qemu-user
- Fix interrupt table (IVT) checksum so firmware will call crash
handler (HPMC)
- Increase IRQ stack to 64kb on 64-bit kernel
- Switch to common devmem_is_allowed() implementation
- Minor fix to get_whan()
* 'parisc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
binfmt_misc: pass binfmt_misc flags to the interpreter
parisc: Optimize per-pagetable spinlocks
parisc: Replace test_ti_thread_flag() with test_tsk_thread_flag()
parisc: Bump 64-bit IRQ stack size to 64 KB
parisc: Fix IVT checksum calculation wrt HPMC
parisc: Use the generic devmem_is_allowed()
parisc: Drop out of get_whan() if task is running again
- vDSO build improvements including support for building with BSD.
- Cleanup to the AMU support code and initialisation rework to support
cpufreq drivers built as modules.
- Removal of synthetic frame record from exception stack when entering
the kernel from EL0.
- Add support for the TRNG firmware call introduced by Arm spec
DEN0098.
- Cleanup and refactoring across the board.
- Avoid calling arch_get_random_seed_long() from
add_interrupt_randomness()
- Perf and PMU updates including support for Cortex-A78 and the v8.3
SPE extensions.
- Significant steps along the road to leaving the MMU enabled during
kexec relocation.
- Faultaround changes to initialise prefaulted PTEs as 'old' when
hardware access-flag updates are supported, which drastically
improves vmscan performance.
- CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
(#1024718)
- Preparatory work for yielding the vector unit at a finer granularity
in the crypto code, which in turn will one day allow us to defer
softirq processing when it is in use.
- Support for overriding CPU ID register fields on the command-line.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmAmwZcQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLA1B/0XMwWUhmJ4ZPK4sr28YWHNGLuCFHDgkMKU
dEmS806OF9d0J7fTczGsKdS4IKtXWko67Z0UGiPIStwfm0itSW2Zgbo9KZeDPqPI
fH0s23nQKxUMyNW7b9p4cTV3YuGVMZSBoMug2jU2DEDpSqeGBk09NPi6inERBCz/
qZxcqXTKxXbtOY56eJmq09UlFZiwfONubzuCrrUH7LU8ZBSInM/6Q4us/oVm4zYI
Pnv996mtL4UxRqq/KoU9+cQ1zsI01kt9/coHwfCYvSpZEVAnTWtfECsJ690tr3mF
TSKQLvOzxbDtU+HcbkNVKW0A38EIO1xXr8yXW9SJx6BJBkyb24xo
=IwMb
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
- vDSO build improvements including support for building with BSD.
- Cleanup to the AMU support code and initialisation rework to support
cpufreq drivers built as modules.
- Removal of synthetic frame record from exception stack when entering
the kernel from EL0.
- Add support for the TRNG firmware call introduced by Arm spec
DEN0098.
- Cleanup and refactoring across the board.
- Avoid calling arch_get_random_seed_long() from
add_interrupt_randomness()
- Perf and PMU updates including support for Cortex-A78 and the v8.3
SPE extensions.
- Significant steps along the road to leaving the MMU enabled during
kexec relocation.
- Faultaround changes to initialise prefaulted PTEs as 'old' when
hardware access-flag updates are supported, which drastically
improves vmscan performance.
- CPU errata updates for Cortex-A76 (#1463225) and Cortex-A55
(#1024718)
- Preparatory work for yielding the vector unit at a finer granularity
in the crypto code, which in turn will one day allow us to defer
softirq processing when it is in use.
- Support for overriding CPU ID register fields on the command-line.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (85 commits)
drivers/perf: Replace spin_lock_irqsave to spin_lock
mm: filemap: Fix microblaze build failure with 'mmu_defconfig'
arm64: Make CPU_BIG_ENDIAN depend on ld.bfd or ld.lld 13.0.0+
arm64: cpufeatures: Allow disabling of Pointer Auth from the command-line
arm64: Defer enabling pointer authentication on boot core
arm64: cpufeatures: Allow disabling of BTI from the command-line
arm64: Move "nokaslr" over to the early cpufeature infrastructure
KVM: arm64: Document HVC_VHE_RESTART stub hypercall
arm64: Make kvm-arm.mode={nvhe, protected} an alias of id_aa64mmfr1.vh=0
arm64: Add an aliasing facility for the idreg override
arm64: Honor VHE being disabled from the command-line
arm64: Allow ID_AA64MMFR1_EL1.VH to be overridden from the command line
arm64: cpufeature: Add an early command-line cpufeature override facility
arm64: Extract early FDT mapping from kaslr_early_init()
arm64: cpufeature: Use IDreg override in __read_sysreg_by_encoding()
arm64: cpufeature: Add global feature override facility
arm64: Move SCTLR_EL1 initialisation to EL-agnostic code
arm64: Simplify init_el2_state to be non-VHE only
arm64: Move VHE-specific SPE setup to mutate_to_vhe()
arm64: Drop early setting of MDSCR_EL2.TPMS
...
-----BEGIN PGP SIGNATURE-----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=8MX/
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/io_uring-2021-02-17' of git://git.kernel.dk/linux-block
Pull io_uring updates from Jens Axboe:
"Highlights from this cycles are things like request recycling and
task_work optimizations, which net us anywhere from 10-20% of speedups
on workloads that mostly are inline.
This work was originally done to put io_uring under memcg, which adds
considerable overhead. But it's a really nice win as well. Also worth
highlighting is the LOOKUP_CACHED work in the VFS, and using it in
io_uring. Greatly speeds up the fast path for file opens.
Summary:
- Put io_uring under memcg protection. We accounted just the rings
themselves under rlimit memlock before, now we account everything.
- Request cache recycling, persistent across invocations (Pavel, me)
- First part of a cleanup/improvement to buffer registration (Bijan)
- SQPOLL fixes (Hao)
- File registration NULL pointer fixup (Dan)
- LOOKUP_CACHED support for io_uring
- Disable /proc/thread-self/ for io_uring, like we do for /proc/self
- Add Pavel to the io_uring MAINTAINERS entry
- Tons of code cleanups and optimizations (Pavel)
- Support for skip entries in file registration (Noah)"
* tag 'for-5.12/io_uring-2021-02-17' of git://git.kernel.dk/linux-block: (103 commits)
io_uring: tctx->task_lock should be IRQ safe
proc: don't allow async path resolution of /proc/thread-self components
io_uring: kill cached requests from exiting task closing the ring
io_uring: add helper to free all request caches
io_uring: allow task match to be passed to io_req_cache_free()
io-wq: clear out worker ->fs and ->files
io_uring: optimise io_init_req() flags setting
io_uring: clean io_req_find_next() fast check
io_uring: don't check PF_EXITING from syscall
io_uring: don't split out consume out of SQE get
io_uring: save ctx put/get for task_work submit
io_uring: don't duplicate io_req_task_queue()
io_uring: optimise SQPOLL mm/files grabbing
io_uring: optimise out unlikely link queue
io_uring: take compl state from submit state
io_uring: inline io_complete_rw_common()
io_uring: move res check out of io_rw_reissue()
io_uring: simplify iopoll reissuing
io_uring: clean up io_req_free_batch_finish()
io_uring: move submit side state closer in the ring
...
-----BEGIN PGP SIGNATURE-----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=os1E
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
The "oprofile" user-space tools don't use the kernel OPROFILE support any more,
and haven't in a long time. User-space has been converted to the perf
interfaces.
The dcookies stuff is only used by the oprofile code. Now that oprofile's
support is getting removed from the kernel, there is no need for dcookies as
well.
Remove kernel's old oprofile and dcookies support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=I2Ac
-----END PGP SIGNATURE-----
Merge tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux
Pull oprofile and dcookies removal from Viresh Kumar:
"Remove oprofile and dcookies support
The 'oprofile' user-space tools don't use the kernel OPROFILE support
any more, and haven't in a long time. User-space has been converted to
the perf interfaces.
The dcookies stuff is only used by the oprofile code. Now that
oprofile's support is getting removed from the kernel, there is no
need for dcookies as well.
Remove kernel's old oprofile and dcookies support"
* tag 'oprofile-removal-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/linux:
fs: Remove dcookies support
drivers: Remove CONFIG_OPROFILE support
arch: xtensa: Remove CONFIG_OPROFILE support
arch: x86: Remove CONFIG_OPROFILE support
arch: sparc: Remove CONFIG_OPROFILE support
arch: sh: Remove CONFIG_OPROFILE support
arch: s390: Remove CONFIG_OPROFILE support
arch: powerpc: Remove oprofile
arch: powerpc: Stop building and using oprofile
arch: parisc: Remove CONFIG_OPROFILE support
arch: mips: Remove CONFIG_OPROFILE support
arch: microblaze: Remove CONFIG_OPROFILE support
arch: ia64: Remove rest of perfmon support
arch: ia64: Remove CONFIG_OPROFILE support
arch: hexagon: Don't select HAVE_OPROFILE
arch: arc: Remove CONFIG_OPROFILE support
arch: arm: Remove CONFIG_OPROFILE support
arch: alpha: Remove CONFIG_OPROFILE support
- Fix an ABBA deadlock when renaming files on overlayfs.
- Make sure that we can't overflow the inode extent counters when adding
to or removing extents from a file.
- Make directory sgid inheritance work the same way as all the other
filesystems.
- Don't drain the buffer cache on freeze and ro remount, which should
reduce the amount of time if read-only workloads are continuing
during the freeze.
- Fix a bug where symlink size isn't reported to the vfs in ecryptfs.
- Disentangle log cleaning from log covering. This refactoring sets us
up for future changes to the log, though for now it simply means that
we can use covering for freezes, and cleaning becomes something we
only do at unmount.
- Speed up file fsyncs by reducing iolock cycling.
- Fix delalloc blocks leaking when changing the project id fails because
of input validation errors in FSSETXATTR.
- Fix oversized quota reservation when converting unwritten extents
during a DAX write.
- Create a transaction allocation helper function to standardize the
idiom of allocating a transaction, reserving blocks, locking inodes,
and reserving quota. Replace all the open-coded logic for file
creation, file ownership changes, and file modifications to use them.
- Actually shut down the fs if the incore quota reservations get
corrupted.
- Fix background block garbage collection scans to not block and to
actually clean out CoW staging extents properly.
- Run block gc scans when we run low on project quota.
- Use the standardized transaction allocation helpers to make it so that
ENOSPC and EDQUOT errors during reservation will back out, invoke the
block gc scanner, and try again. This is preparation for introducing
background inode garbage collection in the next cycle.
- Combine speculative post-EOF block garbage collection with speculative
copy on write block garbage collection.
- Enable multithreaded quotacheck.
- Allow sysadmins to tweak the CPU affinities and maximum concurrency
levels of quotacheck and background blockgc worker pools.
- Expose the inode btree counter feature in the fs geometry ioctl.
- Cleanups of the growfs code in preparation for starting work on
filesystem shrinking.
- Fix all the bloody gcc warnings that the maintainer knows about. :P
- Fix a RST syntax error.
- Don't trigger bmbt corruption assertions after the fs shuts down.
- Restore behavior of forcing SIGBUS on a shut down filesystem when
someone triggers a mmap write fault (or really, any buffered write).
-----BEGIN PGP SIGNATURE-----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=CaLz
-----END PGP SIGNATURE-----
Merge tag 'xfs-5.12-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"There's a lot going on this time, which seems about right for this
drama-filled year.
Community developers added some code to speed up freezing when
read-only workloads are still running, refactored the logging code,
added checks to prevent file extent counter overflow, reduced iolock
cycling to speed up fsync and gc scans, and started the slow march
towards supporting filesystem shrinking.
There's a huge refactoring of the internal speculative preallocation
garbage collection code which fixes a bunch of bugs, makes the gc
scheduling per-AG and hence multithreaded, and standardizes the retry
logic when we try to reserve space or quota, can't, and want to
trigger a gc scan. We also enable multithreaded quotacheck to reduce
mount times further. This is also preparation for background file gc,
which may or may not land for 5.13.
We also fixed some deadlocks in the rename code, fixed a quota
accounting leak when FSSETXATTR fails, restored the behavior that
write faults to an mmap'd region actually cause a SIGBUS, fixed a bug
where sgid directory inheritance wasn't quite working properly, and
fixed a bug where symlinks weren't working properly in ecryptfs. We
also now advertise the inode btree counters feature that was
introduced two cycles ago.
Summary:
- Fix an ABBA deadlock when renaming files on overlayfs.
- Make sure that we can't overflow the inode extent counters when
adding to or removing extents from a file.
- Make directory sgid inheritance work the same way as all the other
filesystems.
- Don't drain the buffer cache on freeze and ro remount, which should
reduce the amount of time if read-only workloads are continuing
during the freeze.
- Fix a bug where symlink size isn't reported to the vfs in ecryptfs.
- Disentangle log cleaning from log covering. This refactoring sets
us up for future changes to the log, though for now it simply means
that we can use covering for freezes, and cleaning becomes
something we only do at unmount.
- Speed up file fsyncs by reducing iolock cycling.
- Fix delalloc blocks leaking when changing the project id fails
because of input validation errors in FSSETXATTR.
- Fix oversized quota reservation when converting unwritten extents
during a DAX write.
- Create a transaction allocation helper function to standardize the
idiom of allocating a transaction, reserving blocks, locking
inodes, and reserving quota. Replace all the open-coded logic for
file creation, file ownership changes, and file modifications to
use them.
- Actually shut down the fs if the incore quota reservations get
corrupted.
- Fix background block garbage collection scans to not block and to
actually clean out CoW staging extents properly.
- Run block gc scans when we run low on project quota.
- Use the standardized transaction allocation helpers to make it so
that ENOSPC and EDQUOT errors during reservation will back out,
invoke the block gc scanner, and try again. This is preparation for
introducing background inode garbage collection in the next cycle.
- Combine speculative post-EOF block garbage collection with
speculative copy on write block garbage collection.
- Enable multithreaded quotacheck.
- Allow sysadmins to tweak the CPU affinities and maximum concurrency
levels of quotacheck and background blockgc worker pools.
- Expose the inode btree counter feature in the fs geometry ioctl.
- Cleanups of the growfs code in preparation for starting work on
filesystem shrinking.
- Fix all the bloody gcc warnings that the maintainer knows about. :P
- Fix a RST syntax error.
- Don't trigger bmbt corruption assertions after the fs shuts down.
- Restore behavior of forcing SIGBUS on a shut down filesystem when
someone triggers a mmap write fault (or really, any buffered
write)"
* tag 'xfs-5.12-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (85 commits)
xfs: consider shutdown in bmapbt cursor delete assert
xfs: fix boolreturn.cocci warnings
xfs: restore shutdown check in mapped write fault path
xfs: fix rst syntax error in admin guide
xfs: fix incorrect root dquot corruption error when switching group/project quota types
xfs: get rid of xfs_growfs_{data,log}_t
xfs: rename `new' to `delta' in xfs_growfs_data_private()
libxfs: expose inobtcount in xfs geometry
xfs: don't bounce the iolock between free_{eof,cow}blocks
xfs: expose the blockgc workqueue knobs publicly
xfs: parallelize block preallocation garbage collection
xfs: rename block gc start and stop functions
xfs: only walk the incore inode tree once per blockgc scan
xfs: consolidate the eofblocks and cowblocks workers
xfs: consolidate incore inode radix tree posteof/cowblocks tags
xfs: remove trivial eof/cowblocks functions
xfs: hide xfs_icache_free_cowblocks
xfs: hide xfs_icache_free_eofblocks
xfs: relocate the eofb/cowb workqueue functions
xfs: set WQ_SYSFS on all workqueues in debug mode
...
- Adjust the final parameter of iomap_dio_rw.
- Add a new flag to request that iomap directio writes return EAGAIN if
the write is not a pure overwrite within EOF; this will be used to
reduce lock contention with unaligned direct writes on XFS.
- Amend XFS' directio code to eliminate exclusive locking for unaligned
direct writes if the circumstances permit
-----BEGIN PGP SIGNATURE-----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=AR07
-----END PGP SIGNATURE-----
Merge tag 'iomap-5.12-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull iomap updates from Darrick Wong:
"The big change in this cycle is some new code to make it possible for
XFS to try unaligned directio overwrites without taking locks. If the
block is fully written and within EOF (i.e. doesn't require any
further fs intervention) then we can let the unlocked write proceed.
If not, we fall back to synchronizing direct writes.
Summary:
- Adjust the final parameter of iomap_dio_rw.
- Add a new flag to request that iomap directio writes return EAGAIN
if the write is not a pure overwrite within EOF; this will be used
to reduce lock contention with unaligned direct writes on XFS.
- Amend XFS' directio code to eliminate exclusive locking for
unaligned direct writes if the circumstances permit"
* tag 'iomap-5.12-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: reduce exclusive locking on unaligned dio
xfs: split the unaligned DIO write code out
xfs: improve the reflink_bounce_dio_write tracepoint
xfs: simplify the read/write tracepoints
xfs: remove the buffered I/O fallback assert
xfs: cleanup the read/write helper naming
xfs: make xfs_file_aio_write_checks IOCB_NOWAIT-aware
xfs: factor out a xfs_ilock_iocb helper
iomap: add a IOMAP_DIO_OVERWRITE_ONLY flag
iomap: pass a flags argument to iomap_dio_rw
iomap: rename the flags variable in __iomap_dio_rw
Add an ioctl which allows reading fs-verity metadata from a file.
This is useful when a file with fs-verity enabled needs to be served
somewhere, and the other end wants to do its own fs-verity compatible
verification of the file. See the commit messages for details.
This new ioctl has been tested using new xfstests I've written for it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCYCv/2hQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK6/7AQDRmmnV+G34yGPCWfu8tyjdYvWPyak2
IA/I+eM6S/F+4QEAkbX6rOwYVhLHN9KSOYyNhJiBchm6xq83J+R8BYh/Kw0=
=FPNK
-----END PGP SIGNATURE-----
Merge tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity updates from Eric Biggers:
"Add an ioctl which allows reading fs-verity metadata from a file.
This is useful when a file with fs-verity enabled needs to be served
somewhere, and the other end wants to do its own fs-verity compatible
verification of the file. See the commit messages for details.
This new ioctl has been tested using new xfstests I've written for it"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: support reading signature with ioctl
fs-verity: support reading descriptor with ioctl
fs-verity: support reading Merkle tree with ioctl
fs-verity: add FS_IOC_READ_VERITY_METADATA ioctl
fs-verity: don't pass whole descriptor to fsverity_verify_signature()
fs-verity: factor out fsverity_get_descriptor()
- Update NFSv2 and NFSv3 XDR decoding functions
- Further improve support for re-exporting NFS mounts
- Convert NFSD stats to per-CPU counters
- Add batch Receive posting to the server's RPC/RDMA transport
-----BEGIN PGP SIGNATURE-----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=02xw
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
- Update NFSv2 and NFSv3 XDR decoding functions
- Further improve support for re-exporting NFS mounts
- Convert NFSD stats to per-CPU counters
- Add batch Receive posting to the server's RPC/RDMA transport
* tag 'nfsd-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (65 commits)
nfsd: skip some unnecessary stats in the v4 case
nfs: use change attribute for NFS re-exports
NFSv4_2: SSC helper should use its own config.
nfsd: cstate->session->se_client -> cstate->clp
nfsd: simplify nfsd4_check_open_reclaim
nfsd: remove unused set_client argument
nfsd: find_cpntf_state cleanup
nfsd: refactor set_client
nfsd: rename lookup_clientid->set_client
nfsd: simplify nfsd_renew
nfsd: simplify process_lock
nfsd4: simplify process_lookup1
SUNRPC: Correct a comment
svcrdma: DMA-sync the receive buffer in svc_rdma_recvfrom()
svcrdma: Reduce Receive doorbell rate
svcrdma: Deprecate stat variables that are no longer used
svcrdma: Restore read and write stats
svcrdma: Convert rdma_stat_sq_starve to a per-CPU counter
svcrdma: Convert rdma_stat_recv to a per-CPU counter
svcrdma: Refactor svc_rdma_init() and svc_rdma_clean_up()
...
- fix shift-out-of-bounds of crafted blkszbits generated by syzkaller;
- ensure initialized fields can only be observed after bit is set.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQThPAmQN9sSA0DVxtI5NzHcH7XmBAUCYC5qFBUcaHNpYW5na2Fv
QHJlZGhhdC5jb20ACgkQOTcx3B+15gT4PwD/W8BGqC3/uBC6qGJuNkRteFmaIDvB
EplXizcZ+6ennkkBAIbbEsFx8K3TM/tg45YqV+ebjRbsH4NG1owVqb8ZAc0M
=Ni8F
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"This contains a somewhat important but rarely reproduced fix reported
month ago for platforms which have weak memory model (e.g. arm64).
The root cause is that test_bit/set_bit atomic operations are actually
implemented in relaxed forms, and uninitialized fields governed by an
atomic bit could be observed in advance due to memory reordering thus
memory barrier pairs should be used.
There is also a trivial fix of crafted blkszbits generated by
syzkaller.
Summary:
- fix shift-out-of-bounds of crafted blkszbits generated by syzkaller
- ensure initialized fields can only be observed after bit is set"
* tag 'erofs-for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: initialized fields can only be observed after bit is set
erofs: fix shift-out-of-bounds of blkszbits
We've added two major features: 1) compression level and 2) checkpoint_merge, in
this round. 1) compression level expands 'compress_algorithm' mount option to
accept parameter as format of <algorithm>:<level>, by this way, it gives a way
to allow user to do more specified config on lz4 and zstd compression level,
then f2fs compression can provide higher compress ratio. 2) checkpoint_merge
creates a kernel daemon and makes it to merge concurrent checkpoint requests as
much as possible to eliminate redundant checkpoint issues. Plus, we can
eliminate the sluggish issue caused by slow checkpoint operation when the
checkpoint is done in a process context in a cgroup having low i/o budget and
cpu shares.
Enhancement:
- add compress level for lz4 and zstd in mount option
- checkpoint_merge mount option
- deprecate f2fs_trace_io
Bug fix:
- flush data when enabling checkpoint back
- handle corner cases of mount options
- missing ACL update and lock for I_LINKABLE flag
- attach FIEMAP_EXTENT_MERGED in f2fs_fiemap
- fix potential deadlock in compression flow
- fix wrong submit_io condition
As usual, we've cleaned up many code flows and fixed minor bugs.
-----BEGIN PGP SIGNATURE-----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=+/7T
-----END PGP SIGNATURE-----
Merge tag 'f2fs-for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"We've added two major features: 1) compression level and 2)
checkpoint_merge, in this round.
Compression level expands 'compress_algorithm' mount option to accept
parameter as format of <algorithm>:<level>, by this way, it gives a
way to allow user to do more specified config on lz4 and zstd
compression level, then f2fs compression can provide higher compress
ratio.
checkpoint_merge creates a kernel daemon and makes it to merge
concurrent checkpoint requests as much as possible to eliminate
redundant checkpoint issues. Plus, we can eliminate the sluggish issue
caused by slow checkpoint operation when the checkpoint is done in a
process context in a cgroup having low i/o budget and cpu shares.
Enhancements:
- add compress level for lz4 and zstd in mount option
- checkpoint_merge mount option
- deprecate f2fs_trace_io
Bug fixes:
- flush data when enabling checkpoint back
- handle corner cases of mount options
- missing ACL update and lock for I_LINKABLE flag
- attach FIEMAP_EXTENT_MERGED in f2fs_fiemap
- fix potential deadlock in compression flow
- fix wrong submit_io condition
As usual, we've cleaned up many code flows and fixed minor bugs"
* tag 'f2fs-for-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (32 commits)
Documentation: f2fs: fix typo s/automaic/automatic
f2fs: give a warning only for readonly partition
f2fs: don't grab superblock freeze for flush/ckpt thread
f2fs: add ckpt_thread_ioprio sysfs node
f2fs: introduce checkpoint_merge mount option
f2fs: relocate inline conversion from mmap() to mkwrite()
f2fs: fix a wrong condition in __submit_bio
f2fs: remove unnecessary initialization in xattr.c
f2fs: fix to avoid inconsistent quota data
f2fs: flush data when enabling checkpoint back
f2fs: deprecate f2fs_trace_io
f2fs: Remove readahead collision detection
f2fs: remove unused stat_{inc, dec}_atomic_write
f2fs: introduce sb_status sysfs node
f2fs: fix to use per-inode maxbytes
f2fs: compress: fix potential deadlock
libfs: unexport generic_ci_d_compare() and generic_ci_d_hash()
f2fs: fix to set/clear I_LINKABLE under i_lock
f2fs: fix null page reference in redirty_blocks
f2fs: clean up post-read processing
...
-----BEGIN PGP SIGNATURE-----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=0O6r
-----END PGP SIGNATURE-----
Merge tag 'for-5.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This brings updates of space handling, performance improvements or bug
fixes. The subpage block size and zoned mode features have reached
state where they're usable but with limitations.
Performance or related:
- do not block on deleted block group mutex in the cleaner, avoids
some long stalls
- improved flushing: make it work better with ticket space
reservations and avoid excessive transaction commits in some
scenarios, slightly improves throughput for random write load
- preemptive background flushing: separate the logic from ticket
reservations, improve the accounting and decisions when to flush in
low space conditions
- less lock contention related to running delayed refs, let just one
thread do the flushing when there are many inside transaction
commit
- dbench workload improvements: avoid unnecessary work when logging
inodes, fewer fallbacks to transaction commit and thus less waiting
for it (+7% throughput, -20% latency)
Core:
- subpage block size
- currently read-only support
- refactor and generalize code where sectorsize is assumed to be
page size, add the subpage handling everywhere
- the read-write support is on the way, page sizes are still
limited to 4K or 64K
- zoned mode, first working version but with limitations
- SMR/ZBC/ZNS friendly allocation mode, utilizing the "no fixed
location for structures" and chunked allocation
- superblock as the only fixed data structure needs special
handling, uses 2 consecutive zones as a ring buffer
- tree-log support with a dedicated block group to avoid unordered
writes
- emulated zones on non-zoned devices
- not yet working
- all non-single block group profiles, requires more zone write
pointer synchronization between the multiple block groups
- fitrim due to dependency on space cache, can be implemented
Fixes:
- ref-verify: proper tree owner and node level tracking
- fix pinned byte accounting, causing some early ENOSPC now more
likely due to other changes in delayed refs
Other:
- error handling fixes and improvements
- more error injection points
- more function documentation
- more and updated tracepoints
- subset of W=1 checked by default
- update comments to allow more automatic kdoc parameter checks"
* tag 'for-5.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (144 commits)
btrfs: zoned: enable to mount ZONED incompat flag
btrfs: zoned: deal with holes writing out tree-log pages
btrfs: zoned: reorder log node allocation on zoned filesystem
btrfs: zoned: serialize log transaction on zoned filesystems
btrfs: zoned: extend zoned allocator to use dedicated tree-log block group
btrfs: split alloc_log_tree()
btrfs: zoned: relocate block group to repair IO failure in zoned filesystems
btrfs: zoned: enable relocation on a zoned filesystem
btrfs: zoned: support dev-replace in zoned filesystems
btrfs: zoned: implement copying for zoned device-replace
btrfs: zoned: implement cloning for zoned device-replace
btrfs: zoned: mark block groups to copy for device-replace
btrfs: zoned: do not use async metadata checksum on zoned filesystems
btrfs: zoned: wait for existing extents before truncating
btrfs: zoned: serialize metadata IO
btrfs: zoned: introduce dedicated data write path for zoned filesystems
btrfs: zoned: enable zone append writing for direct IO
btrfs: zoned: use ZONE_APPEND write for zoned mode
btrfs: save irq flags when looking up an ordered extent
btrfs: zoned: cache if block group is on a sequential zone
...
-----BEGIN PGP SIGNATURE-----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=Eo74
-----END PGP SIGNATURE-----
Merge tag 'affs-for-5.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull AFFS fix from David Sterba:
"One minor fix for error handling in rename exchange"
* tag 'affs-for-5.12-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
fs/affs: release old buffer head on error path
-----BEGIN PGP SIGNATURE-----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=ESGZ
-----END PGP SIGNATURE-----
Merge tag 'jfs-5.12' of git://github.com/kleikamp/linux-shaggy
Pull jfs updates from David Kleikamp:
"A few jfs fixes"
* tag 'jfs-5.12' of git://github.com/kleikamp/linux-shaggy:
fs/jfs: fix potential integer overflow on shift of a int
jfs: turn diLog(), dataLog() and txLog() into void functions
JFS: more checks for invalid superblock
-----BEGIN PGP SIGNATURE-----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=hsmB
-----END PGP SIGNATURE-----
Merge tag 'locks-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull fcntl fix from Jeff Layton.
* tag 'locks-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
fcntl: make F_GETOWN(EX) return 0 on dead owner task
Pull namei updates from Al Viro:
"Most of that pile is LOOKUP_CACHED series; the rest is a couple of
misc cleanups in the general area...
There's a minor bisect hazard in the end of series, and normally I
would've just folded the fix into the previous commit, but this branch
is shared with Jens' tree, with stuff on top of it in there, so that
would've required rebases outside of vfs.git"
* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix handling of nd->depth on LOOKUP_CACHED failures in try_to_unlazy*
fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED
fs: add support for LOOKUP_CACHED
saner calling conventions for unlazy_child()
fs: make unlazy_walk() error handling consistent
fs/namei.c: Remove unlikely of status being -ECHILD in lookup_fast()
do_tmpfile(): don't mess with finish_open()
Pull ELF compat updates from Al Viro:
"Sanitizing ELF compat support, especially for triarch architectures:
- X32 handling cleaned up
- MIPS64 uses compat_binfmt_elf.c both for O32 and N32 now
- Kconfig side of things regularized
Eventually I hope to have compat_binfmt_elf.c killed, with both native
and compat built from fs/binfmt_elf.c, with -DELF_BITS={64,32} passed
by kbuild, but that's a separate story - not included here"
* 'work.elf-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
get rid of COMPAT_ELF_EXEC_PAGESIZE
compat_binfmt_elf: don't bother with undef of ELF_ARCH
Kconfig: regularize selection of CONFIG_BINFMT_ELF
mips compat: switch to compat_binfmt_elf.c
mips: don't bother with ELF_CORE_EFLAGS
mips compat: don't bother with ELF_ET_DYN_BASE
mips: KVM_GUEST makes no sense for 64bit builds...
mips: kill unused definitions in binfmt_elf[on]32.c
mips binfmt_elf*32.c: use elfcore-compat.h
x32: make X32, !IA32_EMULATION setups able to execute x32 binaries
[amd64] clean PRSTATUS_SIZE/SET_PR_FPVALID up properly
elf_prstatus: collect the common part (everything before pr_reg) into a struct
binfmt_elf: partially sanitize PRSTATUS_SIZE and SET_PR_FPVALID
Pull sendfile updates from Al Viro:
"Make sendfile() to pipe destination do the right thing, should make
'fs/pipe: allow sendfile() to pipe again' redundant"
* 'work.sendfile' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
teach sendfile(2) to handle send-to-pipe directly
take the guts of file-to-pipe splice into a helper function
do_splice_to(): move the logics for limiting the read length in
There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use [1], and
received confirmation about six ARM platforms and the TI C6x architecture
that have all reached the end of their life upstream, with no known
users remaining:
- efm32 -- added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell -- added in 2011, abandoned after 2012 acquisition
- prima2 -- added in 20111, no notable changes since 2015
- tango -- added in 2015, sporadic changes until 2017, but abandoned
- u300 -- added in 2009, no notable changes since 2013
- zx --added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x -- added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users
that plan to contribute them in the future, in other cases the code
is complete and works reliably.
[1] https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=pf3b
-----END PGP SIGNATURE-----
Merge tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC platform removals from Arnd Bergmann:
"There are a lot of platforms that have not seen any interesting code
changes in the past five years or more.
I made a list and asked around which ones are no longer in use, and
received confirmation about six ARM platforms and the TI C6x
architecture that have all reached the end of their life upstream,
with no known users remaining:
- efm32 - added in 2011, first Cortex-M, no notable changes after 2013
- picoxcell - added in 2011, abandoned after 2012 acquisition
- prima2 - added in 20111, no notable changes since 2015
- tango - added in 2015, sporadic changes until 2017, but abandoned
- u300 - added in 2009, no notable changes since 2013
- zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes
- arch/c6x - added in 2011, but work stalled soon after that
A number of other platforms on the original list turned out to still
have users. In some cases there are out-of-tree patches and users that
plan to contribute them in the future, in other cases the code is
complete and works reliably"
Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/
* tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: remove u300 platform
ARM: remove tango platform
ARM: remove zte zx platform
ARM: remove sirf prima2/atlas platforms
c6x: remove architecture
MAINTAINERS: Remove deleted platform efm32
ARM: drop efm32 platform
ARM: Remove PicoXcell platform support
ARM: dts: Remove PicoXcell platforms
sqe->flags are subset of req flags, so incorrectly copied may span into
in-kernel flags and wreck havoc, e.g. by setting REQ_F_INFLIGHT.
Fixes: 5be9ad1e42 ("io_uring: optimise io_init_req() flags setting")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a short window where percpu_refs are already turned zero, but
we try to do resurrect(). Play nicer and wait for ->release() to happen
in this case and proceed as everything is ok. One downside for ctx refs
is that we can ignore signal_pending() on a rare occasion, but someone
else should check for it later if needed.
Cc: <stable@vger.kernel.org> # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_rsrc_ref_quiesce() is a generic resource function, though now it
was wired to allocate and initialise ref nodes with file-specific
callbacks/etc. Keep it sane by passing in as a parameters everything we
need for initialisations, otherwise it will hurt us badly one day.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After a rsrc/files reference node's refs are killed, it must never be
used. And that's how it works, it either assigns a new node or kills the
whole data table.
Let's explicitly NULL it, that shouldn't be necessary, but if something
would go wrong I'd rather catch a NULL dereference to using a dangling
pointer.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the prep and prep async split, we now have potentially 3 helpers
that need to be defined for !CONFIG_NET. Add some helpers to do just
that.
Fixes the following compile error on !CONFIG_NET:
fs/io_uring.c:6171:10: error: implicit declaration of function
'io_sendmsg_prep_async'; did you mean 'io_req_prep_async'?
[-Werror=implicit-function-declaration]
return io_sendmsg_prep_async(req);
^~~~~~~~~~~~~~~~~~~~~
io_req_prep_async
Fixes: 93642ef884 ("io_uring: split sqe-prep and async setup")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov
Bob Peterson
Yang Li
J. Bruce Fields
Julian Braha
Trond Myklebust
Jens Axboe
Aurelien Aptel
Zhaolong Zhang
Sabyrzhan Tasbolatov
Jan Kara
Eric Whitney
Linus Torvalds
Vivek Goyal
Naohiro Aota
Amir Goldstein
Dmitry Osipenko
Qu Wenruo
Filipe Manana
Nikolay Borisov
Boris Burkov
Dan Carpenter
Randy Dunlap
Matthew Wilcox (Oracle)
Ira Weiny
Josef Bacik
Helge Deller
Steve French
David Howells
Paulo Alcantara
Ronnie Sahlberg
Dave Chinner
Darrick J. Wong
Brian Foster
Miaohe Lin
Mike Kravetz
Yang Li
Johannes Weiner
Muchun Song
Yang Guo
Christoph Hellwig
Baolin Wang
Alexey Dobriyan
Jiapeng Chong
Dan Carpenter
guozh
Yi Li
Rustam Kovhaev
Shyam Prasad N
Andreas Gruenbacher
Tetsuo Handa
Al Viro
Rohith Surabattula
Johannes Thumshirn
Hyeongseok Kim
Namjae Jeon
Hao Xu