Pointers should be printed with %p or %px rather than
cast to unsigned long type and printed with %lx.
Change %lx to %p to print the pointers.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
For debugging purpose, it will be useful to expose the content of the
subparts_cpus as a read-only file to see if the code work correctly.
However, subparts_cpus will not be used at all in most use cases. So
adding a new cpuset file that clutters the cgroup directory may not be
desirable. This is now being done by using the hidden "cgroup_debug"
kernel command line option to expose a new "cpuset.cpus.subpartitions"
file.
That option was originally used by the debug controller to expose
itself when configured into the kernel. This is now extended to set an
internal flag used by cgroup_addrm_files(). A new CFTYPE_DEBUG flag
can now be used to specify that a cgroup file should only be created
when the "cgroup_debug" option is specified.
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
This macro `task_css_set` verifies that the caller is
inside proper critical section if the kernel set CONFIG_PROVE_RCU=y.
Signed-off-by: Wang Long <wanglong19@meituan.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update debug controller so that it prints out debug info about thread
mode.
1) The relationship between proc_cset and threaded_csets are displayed.
2) The status of being a thread root or threaded cgroup is displayed.
This patch is extracted from Waiman's larger patch.
v2: - Removed [thread root] / [threaded] from debug.cgroup_css_links
file as the same information is available from cgroup.type.
Suggested by Waiman.
- Threaded marking is moved to the previous patch.
Patch-originally-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This patch implements cgroup v2 thread support. The goal of the
thread mode is supporting hierarchical accounting and control at
thread granularity while staying inside the resource domain model
which allows coordination across different resource controllers and
handling of anonymous resource consumptions.
A cgroup is always created as a domain and can be made threaded by
writing to the "cgroup.type" file. When a cgroup becomes threaded, it
becomes a member of a threaded subtree which is anchored at the
closest ancestor which isn't threaded.
The threads of the processes which are in a threaded subtree can be
placed anywhere without being restricted by process granularity or
no-internal-process constraint. Note that the threads aren't allowed
to escape to a different threaded subtree. To be used inside a
threaded subtree, a controller should explicitly support threaded mode
and be able to handle internal competition in the way which is
appropriate for the resource.
The root of a threaded subtree, the nearest ancestor which isn't
threaded, is called the threaded domain and serves as the resource
domain for the whole subtree. This is the last cgroup where domain
controllers are operational and where all the domain-level resource
consumptions in the subtree are accounted. This allows threaded
controllers to operate at thread granularity when requested while
staying inside the scope of system-level resource distribution.
As the root cgroup is exempt from the no-internal-process constraint,
it can serve as both a threaded domain and a parent to normal cgroups,
so, unlike non-root cgroups, the root cgroup can have both domain and
threaded children.
Internally, in a threaded subtree, each css_set has its ->dom_cset
pointing to a matching css_set which belongs to the threaded domain.
This ensures that thread root level cgroup_subsys_state for all
threaded controllers are readily accessible for domain-level
operations.
This patch enables threaded mode for the pids and perf_events
controllers. Neither has to worry about domain-level resource
consumptions and it's enough to simply set the flag.
For more details on the interface and behavior of the thread mode,
please refer to the section 2-2-2 in Documentation/cgroup-v2.txt added
by this patch.
v5: - Dropped silly no-op ->dom_cgrp init from cgroup_create().
Spotted by Waiman.
- Documentation updated as suggested by Waiman.
- cgroup.type content slightly reformatted.
- Mark the debug controller threaded.
v4: - Updated to the general idea of marking specific cgroups
domain/threaded as suggested by PeterZ.
v3: - Dropped "join" and always make mixed children join the parent's
threaded subtree.
v2: - After discussions with Waiman, support for mixed thread mode is
added. This should address the issue that Peter pointed out
where any nesting should be avoided for thread subtrees while
coexisting with other domain cgroups.
- Enabling / disabling thread mode now piggy backs on the existing
control mask update mechanism.
- Bug fixes and cleanup.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
The debug controller grabs cgroup_mutex from interface file show
functions which can deadlock and triggers lockdep warnings. Fix it by
using cgroup_kn_lock_live()/cgroup_kn_unlock() instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Factor out cgroup_masks_read_one() out of cgroup_masks_read() for
simplicity.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Make debug an implicit controller on cgroup2 which is enabled by
"cgroup_debug" boot param.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Besides supporting cgroup v2 and thread mode, the following changes
are also made:
1) current_* cgroup files now resides only at the root as we don't
need duplicated files of the same function all over the cgroup
hierarchy.
2) The cgroup_css_links_read() function is modified to report
the number of tasks that are skipped because of overflow.
3) The number of extra unaccounted references are displayed.
4) The current_css_set_read() function now prints out the addresses of
the css'es associated with the current css_set.
5) A new cgroup_subsys_states file is added to display the css objects
associated with a cgroup.
6) A new cgroup_masks file is added to display the various controller
bit masks in the cgroup.
tj: Dropped thread mode related information for now so that debug
controller changes aren't blocked on the thread mode.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The Kconfig prompt and description of the debug cgroup controller
more accurate by saying that it is for debug purpose only and its
interfaces are unstable.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The debug cgroup currently resides within cgroup-v1.c and is enabled
only for v1 cgroup. To enable the debug cgroup also for v2, it makes
sense to put the code into its own file as it will no longer be v1
specific. There is no change to the debug cgroup specific code.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fuqian Huang
Waiman Long
Wang Long
Greg Kroah-Hartman
Tejun Heo