Граф коммитов

195 Коммитов

Автор SHA1 Сообщение Дата
Samuel Ortiz 0f48285755 power: Revert "power_supply: Mark twl4030_charger as broken"
The missing definitions are now in.

This reverts commit 23886839a7.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29 00:30:44 +02:00
Anton Vorontsov 23886839a7 power_supply: Mark twl4030_charger as broken
The driver is not buildable without MFD changes. For now, let's
disable the driver as it breaks build for major platforms (i.e. x86).

  CC [M]  drivers/power/twl4030_charger.o
drivers/power/twl4030_charger.c: In function 'twl4030_clear_set_boot_bci':
drivers/power/twl4030_charger.c:105: error: 'TWL4030_PM_MASTER_BOOT_BCI' undeclared (first use in this function)
drivers/power/twl4030_charger.c:105: error: (Each undeclared identifier is reported only once
drivers/power/twl4030_charger.c:105: error: for each function it appears in.)
drivers/power/twl4030_charger.c: In function 'twl4030_bci_have_vbus':
drivers/power/twl4030_charger.c:137: error: 'TWL4030_PM_MASTER_STS_HW_CONDITIONS' undeclared (first use in this function)
drivers/power/twl4030_charger.c: In function 'twl4030_bci_probe':
drivers/power/twl4030_charger.c:477: warning: overflow in implicit constant conversion
drivers/power/twl4030_charger.c:485: warning: overflow in implicit constant conversion
make[2]: *** [drivers/power/twl4030_charger.o] Error 1

We can re-enable it if MFD tree will finally merge into 2.6.37.

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-28 12:59:52 +04:00
Linus Torvalds 45352bbf48 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  power_supply: Makefile cleanup
  bq27x00_battery: Add missing kfree(di->bus) in bq27x00_battery_remove()
  power_supply: Introduce maximum current property
  power_supply: Add types for USB chargers
  ds2782_battery: Fix units
  power_supply: Add driver for TWL4030/TPS65950 BCI charger
  bq20z75: Add support for more power supply properties
  wm831x_power: Add missing kfree(wm831x_power) in wm831x_power_remove()
  jz4740-battery: Add missing kfree(jz_battery) in jz_battery_remove()
  ds2760_battery: Add missing kfree(di) in ds2760_battery_remove()
  olpc_battery: Fix endian neutral breakage for s16 values
  ds2760_battery: Fix W1 and W1_SLAVE_DS2760 dependency
  pcf50633-charger: Add missing sysfs_remove_group()
  power_supply: Add driver for TI BQ20Z75 gas gauge IC
  wm831x_power: Remove duplicate chg mask
  omap: rx51: Add support for USB chargers
  power_supply: Add isp1704 charger detection driver
2010-10-26 10:14:23 -07:00
matt mooney 5789451713 power_supply: Makefile cleanup
Replace EXTRA_CFLAGS with ccflags-y; remove if-statements and replace
with lists using the kbuild idiom.

None of the dependencies are modified.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-06 17:38:42 +04:00
Axel Lin 9292585c67 bq27x00_battery: Add missing kfree(di->bus) in bq27x00_battery_remove()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-06 17:38:15 +04:00
Heikki Krogerus fe3f6d097a power_supply: Introduce maximum current property
USB only gives the maximum current allowed to draw.

Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-06 17:37:22 +04:00
Heikki Krogerus 85efc8a18c power_supply: Add types for USB chargers
This adds power supply types for USB chargers defined in
Battery Charging Specification 1.1.

Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-06 17:37:09 +04:00
Ryan Mallon 353f867b55 ds2782_battery: Fix units
Correct the unit names in the ds2782 battery driver. Changes voltage_uA
to voltage_uV and capacity_uA to capacity.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Yulia Vilensky <vilensky@compulab.co.il>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-10-06 17:36:49 +04:00
Grazvydas Ignotas 2e727f1787 power_supply: Add driver for TWL4030/TPS65950 BCI charger
TWL4030/TPS65950 is a multi-function device with integrated charger,
which allows charging from AC or USB. This driver enables the charger
and provides several monitoring functions.

Tested on OMAP3 Pandora board.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-30 19:28:09 +04:00
Rhyland Klein d3ab61ecba bq20z75: Add support for more power supply properties
This patch adds properties to support devicekit power. Also, create IO
wrapper functions and fix some issues found while testing, including
unit conversions to match the power_supply types.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-28 16:42:35 +04:00
Axel Lin 9c99f08991 wm831x_power: Add missing kfree(wm831x_power) in wm831x_power_remove()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-28 15:52:34 +04:00
Axel Lin 5f29895f3e jz4740-battery: Add missing kfree(jz_battery) in jz_battery_remove()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-By: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-28 15:52:23 +04:00
Axel Lin a01bce6ad9 ds2760_battery: Add missing kfree(di) in ds2760_battery_remove()
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-28 15:16:23 +04:00
Richard A. Smith 7cfbb29466 olpc_battery: Fix endian neutral breakage for s16 values
When the driver was updated to be endian neutral (8e9c7716c)
the signed part of the s16 values was lost.  This is because be16_to_cpu()
returns an unsigned value.  This patch casts the values back to a s16
number prior to the the implicit cast up to an int.

Signed-off-by: Richard A. Smith <richard@laptop.org>
Signed-off-by: Daniel Drake <dsd@laptop.org>
Cc: <stable@kernel.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-28 15:14:31 +04:00
Martin Schwidefsky f6127b8645 ds2760_battery: Fix W1 and W1_SLAVE_DS2760 dependency
Fix this Kconfig warning on allmodconfig for s390:

warning: (BATTERY_DS2760 && POWER_SUPPLY) selects W1 which has unmet
direct dependencies (HAS_IOMEM)

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-23 17:33:28 +04:00
Axel Lin 305da8f504 pcf50633-charger: Add missing sysfs_remove_group()
sysfs entries should be removed when unload the module.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-22 16:14:49 +04:00
Anton Vorontsov 1d220334d6 apm_power: Add missing break statement
The missing break statement causes wrong capacity calculation for
batteries that report energy.

Reported-by: d binderman <dcb314@hotmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-08 14:35:10 +04:00
Rhyland Klein a7640bfa10 power_supply: Add driver for TI BQ20Z75 gas gauge IC
This driver depends on I2C and uses SMBUS for communication with
the host.

Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-06 11:35:39 +04:00
Ian Lartey 2d98dae206 wm831x_power: Remove duplicate chg mask
Reported-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-09-01 22:35:06 +04:00
Shuduo Sang 77f4b9fe05 intel_pmic_battery: Fix battery charging status on mrst
The arguments got swapped on some functions which produces undefined results.
The main one got fixed before submit but the other two were missed.

Signed-off-by: Shuduo Sang <shuduo.sang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-08-24 18:27:57 +04:00
Heikki Krogerus ec46475f3e power_supply: Add isp1704 charger detection driver
NXP ISP1704 is Battery Charging Specification 1.0 compliant USB
transceiver. This adds a power supply driver for ISP1704 and
ISP1707 USB transceivers.

Signed-off-by: Heikki Krogerus <ext-heikki.krogerus@nokia.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-08-19 16:25:20 +04:00
Linus Torvalds 16bb85bc12 Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  intel_mid_battery: Fix battery scaling
  intel_mid_battery: Fix the argument order to intel_scu_ipc_command
  olpc_battery: Fix build failure caused by sysfs changes
  Add s3c-adc-battery driver
  Intel MID platform battery driver

Fix up trivial conflicts (battery drivers added from different branches)
in drivers/power/{Kconfig,Makefile}
2010-08-12 09:58:33 -07:00
Linus Torvalds 636d17427b Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (226 commits)
  ARM: 6323/1: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions}
  ARM: 6324/1: cam60: move cam60_spi_devices to .init.data
  ARM: 6322/1: imx/pca100: Fix name of spi platform data
  ARM: 6321/1: fix syntax error in main Kconfig file
  ARM: 6297/1: move U300 timer to dynamic clock lookup
  ARM: 6296/1: clock U300 intcon and timer properly
  ARM: 6295/1: fix U300 apb_pclk split
  ARM: 6306/1: fix inverted MMC card detect in U300
  ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID
  ARM: 6294/1: etm: do a dummy read from OSSRR during initialization
  ARM: 6292/1: coresight: add ETM management registers
  ARM: 6288/1: ftrace: document mcount formats
  ARM: 6287/1: ftrace: clean up mcount assembly indentation
  ARM: 6286/1: fix Thumb-2 decompressor broken by "Auto calculate ZRELADDR"
  ARM: 6281/1: video/imxfb.c: allow usage without BACKLIGHT_CLASS_DEVICE
  ARM: 6280/1: imx: Fix build failure when including <mach/gpio.h> without <linux/spinlock.h>
  ARM: S5PV210: Fix on missing s3c-sdhci card detection method for hsmmc3
  ARM: S5P: Fix on missing S5P_DEV_FIMC in plat-s5p/Kconfig
  ARM: S5PV210: Override FIMC driver name on Aquila board
  ARM: S5PC100: enable FIMC on SMDKC100
  ...

Fix up conflicts in arch/arm/mach-{s5pc100,s5pv210}/cpu.c due to
different subsystem 'setname' calls, and trivial port types in
include/linux/serial_core.h
2010-08-11 09:13:19 -07:00
Guenter Roeck 20d7b2415c power: Remove owner field from attribute initialization code in OLPC driver
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-10 15:33:09 -07:00
Alan Cox f59f5bcb60 intel_mid_battery: Fix battery scaling
There are 3600 seconds per not 3600 hours per second. Correcting this
along with the previous fix gives sensible numbers.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-08-10 14:35:27 +04:00
Arjan van de Ven 08a9e07e3f intel_mid_battery: Fix the argument order to intel_scu_ipc_command
The arguments to intel_scu_ipc_command are "command, subcommand"
the battery driver got this the wrong way around.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-08-10 14:34:55 +04:00
David Woodhouse 690e85a395 olpc_battery: Fix build failure caused by sysfs changes
drivers/power/olpc_battery.c:387: error: unknown field 'owner' specified in initializer
drivers/power/olpc_battery.c:387: warning: excess elements in struct initializer
drivers/power/olpc_battery.c:387: warning: (near initialization for 'olpc_bat_eeprom.attr')

The .owner field has been dropped from the attr struct.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-09 18:13:09 +01:00
Russell King f165eb77f4 Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable
Conflicts:
	arch/arm/mach-pxa/palmt5.c
	arch/arm/mach-pxa/palmtreo.c
2010-08-06 18:10:25 +01:00
Lars-Peter Clausen f6a21388bd POWER: Add JZ4740 battery driver.
Add support for the battery voltage measurement part of the JZ4740 ADC unit.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Anton Vorontsov <cbouatmailru@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1416/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:26:20 +01:00
Marek Vasut 5aa9a2cbc0 [ARM] wm97xx_batt: remove now useless header file
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-08-05 14:32:15 +08:00
Linus Torvalds 02e7cce2bc Merge git://git.infradead.org/users/cbou/battery-2.6.35
* git://git.infradead.org/users/cbou/battery-2.6.35:
  ds2782_battery: Rename get_current to fix build failure / name conflict
2010-07-27 09:22:55 -07:00
Vasily Khoruzhick 808be4b22f Add s3c-adc-battery driver
s3c-adc-battery is driver for monitoring and charging battery on
iPAQ H1930/H1940/RX1950.

It depends on s3c-adc driver to get battery voltage and current.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-07-23 17:08:41 +04:00
Linus Torvalds 19f0f0af09 Merge git://git.infradead.org/users/cbou/battery-2.6.35
* git://git.infradead.org/users/cbou/battery-2.6.35:
  ds2782_battery: Fix ds2782_get_capacity return value
2010-07-20 08:22:15 -07:00
Ryan Mallon 2d31757c87 ds2782_battery: Fix ds2782_get_capacity return value
The ds2782_get_capacity function should return 0 on success, not the
capacity value.

Signed-off-by: Ryan Mallon <ryan@bluewatersys.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-06-21 19:13:36 +04:00
Nithish Mahalingam 6721081b6b Intel MID platform battery driver
The PMIC Battery driver provides battery charging and battery gauge
functionality on Intel MID platforms. This provides the basic functions.
There are some USB drivers to merge before the selection of charging
between the different USB power levels can be enabled.

Moved to a platform device by Alek Du.

Signed-off-by: Nithish Mahalingam <nithish.mahalingam@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-06-17 21:52:25 +04:00
Peter Huewe eb9650d6d9 ds2782_battery: Rename get_current to fix build failure / name conflict
This patch changes the name of get_current function pointer to
get_battery_current to resolve a name conflict with the get_current
macro defined in current.h.

This conflict resulted in a build-failure[1] for the sh4 arch
allyesconfig:

  drivers/power/ds2782_battery.c:216:48: error: macro "get_current"
  passed 2 arguments, but takes just

This patch fixes the issue. To be consistent the other function pointers
(_voltage,_capacity) were renamed too.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Acked-by: Ryan Mallon <ryan@bluewatersys.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-06-14 19:33:22 +04:00
Marek Vasut 56b925fccc [ARM] pxa/z2: fix missing include in battery driver
Remove redundant includes and add slab.h to fix problem with building.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-06-13 23:55:13 +08:00
Wolfram Sang fbae3fb154 i2c: Remove all i2c_set_clientdata(client, NULL) in drivers
I2C drivers can use the clientdata-pointer to point to private data. As I2C
devices are not really unregistered, but merely detached from their driver, it
used to be the drivers obligation to clear this pointer during remove() or a
failed probe(). As a couple of drivers forgot to do this, it was agreed that it
was cleaner if the i2c-core does this clearance when appropriate, as there is
no guarantee for the lifetime of the clientdata-pointer after remove() anyhow.
This feature was added to the core with commit
e4a7b9b04d to fix the faulty drivers.

As there is no need anymore to clear the clientdata-pointer, remove all current
occurrences in the drivers to simplify the code and prevent confusion.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-06-03 11:33:58 +02:00
Linus Torvalds 4961ab934a Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  power_supply: Fix regression for 'type' property
2010-05-25 08:16:34 -07:00
Daniel Mack bbabb158f0 power_supply: Fix regression for 'type' property
Commit 5f487cd34f (power_supply: Use
attribute groups) causes a regression the power supply core does not
export the 'type' attribute anymore.

POWER_SUPPLY_PROP_TYPE is handled by the power supply core without the
low-level driver, so power_supply_attr_is_visible() must always return
the entry as readable.

Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Tested-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-05-25 13:52:58 +04:00
Linus Torvalds 15953654cc Merge git://git.infradead.org/battery-2.6
* git://git.infradead.org/battery-2.6:
  ds2760_battery: Document ABI change
  ds2760_battery: Make charge_now and charge_full writeable
  power_supply: Add support for writeable properties
  power_supply: Use attribute groups
  power_supply: Add test_power driver
  tosa_battery: Fix build error due to direct driver_data usage
  wm97xx_battery: Quieten sparse warning (bat_set_pdata not declared)
  ds2782_battery: Get rid of magic numbers in driver_data
  ds2782_battery: Add support for ds2786 battery gas gauge
  pda_power: Add function callbacks for suspend and resume
  wm831x_power: Use genirq
  Driver for Zipit Z2 battery chip
  ds2782_battery: Fix clientdata on removal
2010-05-24 08:00:13 -07:00
Chris Wright 2c3c8bea60 sysfs: add struct file* to bin_attr callbacks
This allows bin_attr->read,write,mmap callbacks to check file specific data
(such as inode owner) as part of any privilege validation.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:31 -07:00
Daniel Mack bd52ca555e ds2760_battery: Make charge_now and charge_full writeable
For userspace tools and daemons, it might be necessary to adjust
the charge_now and charge_full properties of the ds2760 battery monitor,
for example for unavoidable corrections due to aging batteries.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Matt Reimer <mreimer@vpop.net>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Cc: Len Brown <len.brown@intel.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-05-19 12:14:42 +04:00
Daniel Mack 0011d2d4a5 power_supply: Add support for writeable properties
This patch adds support for writeable power supply properties and
exposes them as writeable to sysfs.

A power supply implementation must implement two new function calls in
order to use that feature:

  int set_property(struct power_supply *psy,
                   enum power_supply_property psp,
                   const union power_supply_propval *val);

  int property_is_writeable(struct power_supply *psy,
                            enum power_supply_property psp);

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Cc: Len Brown <len.brown@intel.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Matt Reimer <mreimer@vpop.net>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-05-19 12:14:42 +04:00
Anton Vorontsov 5f487cd34f power_supply: Use attribute groups
This fixes a race between power supply device and initial
attributes creation, plus makes it possible to implement
writable properties.

[Daniel Mack - removed superflous return statement
 and dropped .mode attribute from POWER_SUPPLY_ATTR]

Suggested-by: Greg KH <gregkh@suse.de>
Suggested-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Tested-by: Daniel Mack <daniel@caiaq.de>
2010-05-19 12:14:28 +04:00
Anton Vorontsov a1e50fd445 power_supply: Add test_power driver
Just a handy driver that is used for testing purposes.

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-05-18 19:58:56 +04:00
Dmitry Eremin-Solenikov 06b9e650ce tosa_battery: Fix build error due to direct driver_data usage
The driver isn't buildable since 2.6.32 (i.e. commit b4028437
"Driver core: move dev_get/set_drvdata to drivers/base/dd.c"):

  CC      tosa_battery.o
tosa_battery.c: In function 'tosa_read_bat':
tosa_battery.c:64: error: 'struct device' has no member named 'driver_data'
tosa_battery.c: In function 'tosa_read_temp':
tosa_battery.c:84: error: 'struct device' has no member named 'driver_data'

Nowadays we must not access driver_data directly, use dev_get_drvdata()
instead.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-05-03 00:02:56 +04:00
Anton Vorontsov b1458fb57d wm97xx_battery: Quieten sparse warning (bat_set_pdata not declared)
This patch fixes following sparse warning:

drivers/power/wm97xx_battery.c:311:6: warning: symbol 'wm97xx_bat_set_pdata' was not declared. Should it be static?

Note that we can't just include linux/wm97xx_batt.h because the header
is deprecated, and so this pops up:

In file included from drivers/power/wm97xx_battery.c:22:
include/linux/wm97xx_batt.h:6: warning: #warning This file will be removed soon, use wm97xx.h instead!

Since wm97xx_bat_set_pdata() is also deprecated (in favour of pdata
passed via AC97 bus), just workaround the issue by declaring the
function in wm97xx_battery.c.

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-05-02 23:58:30 +04:00
Anton Vorontsov ab6cc8f9b7 ds2782_battery: Get rid of magic numbers in driver_data
Constructions like 'if (id->driver_data == 1)' look quite weird.
This patch introduces 'enum ds278x_num_id', which makes things
much more understandable, i.e. 'if (id->driver_data == DS2786)'.

Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
2010-05-02 23:41:53 +04:00
Yulia Vilensky 9b9ade6b61 ds2782_battery: Add support for ds2786 battery gas gauge
Signed-off-by: Yulia Vilensky <vilensky@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
2010-04-26 22:03:42 +04:00