Граф коммитов

16 Коммитов

Автор SHA1 Сообщение Дата
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Linus Walleij f956a785a2 soc: move SoC driver for the ARM Integrator
This creates a new SoC bus driver for the ARM Integrator
family core modules to register the SoC bus and provide
sysfs info for the core module. We delete the corresponding
code from the Integrator machine and select this driver to
get a clean result.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-11-13 10:32:05 +01:00
Linus Walleij b437c52c29 ARM: integrator: move restart to the device tree
Using the augmented reset driver for the Versatile family,
we can move the reset handling for the Integrator out of the
machine. We add a "syscon" attribute to the core module, and
access the syscon registers using this handle. We need to
select SYSCON, POWER, POWER_RESET and POWER_RESET_VERSATILE
in order for the restart functionality to always be
available on all systems (it should not be optional).

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-11-13 10:32:02 +01:00
Robin Holt 7b6d864b48 reboot: arm: change reboot_mode to use enum reboot_mode
Preparing to move the parsing of reboot= to generic kernel code forces
the change in reboot_mode handling to use the enum.

[akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c]
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:29 -07:00
Arnd Bergmann a02e0a831f ARM: integrator: fix build with INTEGRATOR_AP off
The conditional declaration of ap_uart_data is broken
and causes this build error:

In file included from arch/arm/mach-integrator/core.c:35:0:
arch/arm/mach-integrator/common.h:6:37: error: expected '=', ',', ';', 'asm' or '__attribute__' before '{' token

Turning the check into an constant-expression if(IS_ENABLED()) statement
creates more readable code and solves this problem as well.

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
2013-02-14 15:04:38 +01:00
Linus Walleij 379df2793e ARM: integrator: push down SC dependencies
This pushes the dependencies on the Integrator/AP system
controller (SC) down into the PCI V3 driver and the
AP-specific board file.

First, the platform data for the PL010 UART is moved into
the integrator_ap.c board file, and the Integrator/CP is
assigned with NULL pdata. This way the callback functions
can reference the dynamically remapped AP syscon address
in both the ATAG and DT boot path, and this remapping
is localized to the board file.

Second the PCIv3 driver is making its own dynamic remapping
of the SC for the few registers it is using. When we
convert the PCIv3 driver over to using device tree having a
dynamically assigned base address will be useful, but we
will have to use the definition from <mach/platform.h> for
now, the only improvement is that it's done dynamically.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-17 19:38:27 +01:00
Linus Walleij e67ae6be73 ARM: integrator: hook the AP into the SoC bus
This hooks the Integrator/AP into the SoC bus when booting from
device tree, by mapping the AP controller registers first,
then registering the SoC device, and then populating the device
tree with the SoC device as parent.

Introduce some helpers in the core to provide sysfs files
detailing the use of the SoC ID which will later be reused by
the Integrator/CP patch for the same bus grouping.

Cc: Lee Jones <lee.jones@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-16 22:25:50 +01:00
Linus Walleij 4672cddff2 ARM: 7518/1: integrator: convert AMBA devices to device tree
This converts the AMBA (PrimeCell) devices on the Integrator/AP
and Integrator/CP over to probing from the Device Tree if the
kernel is compiled for Device Tree support.

We continue to #ifdef out all non-DT code and vice versa on
respective boot type to get a clean cut.

We need to add a bunch of auxdata (compare to the Versatile)
to handle bus names and callbacks alike.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-17 23:20:22 +01:00
Linus Walleij 9bf26a1805 ARM: 7514/1: integrator: call common init function from machine
There is currently a common integrator_init() function set up
to be called from an arch_initcall(). The problem is that it is
using machine_is_integrator() which is not working with device
tree, let's call this from respective machine initilization
function and add a parameter to tell whether it's the
Integrator/AP or Integrator/CP instead.

There are still machine_is*() calls in the Integrator
machines directory, but this one needs to be fixed lest we
don't even get a UART console on the Integrator/AP after a
Device Tree boot.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-17 00:25:39 +01:00
Russell King 6338b66f8a ARM: restart: integrator: use new restart hook
Hook these platforms restart code into the new restart hook rather
than using arch_reset().

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05 12:57:13 +00:00
Russell King c735c9873d ARM: integrator: use new init_early for clock tree init
Initialize the clock tree early.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19 11:09:33 +00:00
Russell King 98c672cf1f ARM: Move platform memory reservations out of generic code
Move the platform specific bootmem memory reservations out of
arch/arm/mm/mmu.c into their respective platform files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-16 11:06:40 +01:00
Russell King 6be4826e37 ARM: Integrator: move 16-bit timer support to Integrator/AP
Only Integrator/AP has 16-bit timers, so move the support into the
Integrator/AP specific support files.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02 09:35:36 +01:00
Russell King 861248d177 ARM: Integrator: pass 'khz' to integrator_time_init
This is now what the clocksource/clockevent initialization functions
want, so give them the timer tick rate directly.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-29 18:04:17 +01:00
Russell King b9cedda230 ARM: Integrator: convert to generic time support
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-29 18:04:15 +01:00
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00