When creating a new radio on the fly, hwsim allows this
to be done with an arbitrary number of channels, but
cfg80211 only supports a limited number of simultaneous
channels, leading to a warning.
Fix this by validating the number - this requires moving
the define for the maximum out to a visible header file.
Reported-by: syzbot+8dd9051ff19940290931@syzkaller.appspotmail.com
Fixes: b59ec8dd43 ("mac80211_hwsim: fix number of channels in interface combinations")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When closing multiple wmediumd instances with many radios and try to
unload the mac80211_hwsim module, it may happen that the work items live
longer than the module. To wait especially for this deletion work items,
add a work queue, otherwise flush_scheduled_work would be necessary.
Signed-off-by: Benjamin Beichler <benjamin.beichler@uni-rostock.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As ieee80211_bss_get_ie() derefences an RCU to return ssid_ie, both
the call to this function and any operation on this variable need
protection by the RCU read lock.
Fixes: 44905265bc ("nl80211: don't expose wdev->ssid for most interfaces")
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Paul reported that he got a report about undefined behaviour
that seems to me to originate in using uninitialized memory
when the channel structure here is used in the event code in
nl80211 later.
He never reported whether this fixed it, and I wasn't able
to trigger this so far, but we should do the right thing and
fully initialize the on-stack structure anyway.
Reported-by: Paul Menzel <pmenzel+linux-wireless@molgen.mpg.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Daniel Borkmann says:
====================
pull-request: bpf 2018-01-13
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Follow-up fix to the recent BPF out-of-bounds speculation
fix that prevents max_entries overflows and an undefined
behavior on 32 bit archs on index_mask calculation, from
Daniel.
2) Reject unsupported BPF_ARSH opcode in 32 bit ALU mode that
was otherwise throwing an unknown opcode warning in the
interpreter, from Daniel.
3) Typo fix in one of the user facing verbose() messages that
was added during the BPF out-of-bounds speculation fix,
from Colin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaV/8zAAoJEEg/ir3gV/o+Ui0IAJWzQe1HHNJeWUykLNYMbjbQ
vxnnsbYd5Y2j/Q+tJdi6FJxEvC8kF78BJvDp37plV+lqZAXsvaGlLgyWcnY/XkFs
byVjueQVyil/JUyIw5ciK8DqOOI/tdo5v51ZJ05JZYRdyP0E1KVwy9jXHEpVJKmm
QlIfjrzbv5p6ydysKi6Z9NFKJ9CjSIyHh4Ew8VQKuzJ+AtoZ8L6XWGDHvoZl8DAb
jweJwRU9bhBqyoWjRRGtTqfcNmwvhYcJwuzER9vKK4l4JAvzhl8PGzeWsE8wPYBW
uKNRAPET7HQQsZblPU2l66oZVFMXhBsBnuY90jlPlmeHB/KLBLZp/m4EIzHEsoM=
=EiuX
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2018-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2018-01-11
The following series includes fixes to mlx5 core and netdev driver.
To highlight we have two critical fixes in this series:
1st patch from Eran to address a fix for Host2BMC Breakage.
2nd patch from Saeed to address the RDMA IRQ vector affinity settings query
issue, the patch provides the correct mlx5_core implementation for RDMA to
correctly query vector affinity.
I sent this patch privately to Sagi a week a go, so he could to test it
but I didn't hear from him.
All other patches are trivial misc fixes.
Please pull and let me know if there's any problem.
for -stable v4.14-y and later:
("net/mlx5: Fix get vector affinity helper function")
("{net,ib}/mlx5: Don't disable local loopback multicast traffic when needed")
Note: Merging this series with net-next will produce the following conflict:
<<<<<<< HEAD
u8 disable_local_lb[0x1];
u8 reserved_at_3e2[0x1];
u8 log_min_hairpin_wq_data_sz[0x5];
u8 reserved_at_3e8[0x3];
=======
u8 disable_local_lb_uc[0x1];
u8 disable_local_lb_mc[0x1];
u8 reserved_at_3e3[0x8];
>>>>>>> 359c96447ac2297fabe15ef30b60f3b4b71e7fd0
To resolve, use the following hunk:
i.e:
<<<<<<
u8 disable_local_lb_uc[0x1];
u8 disable_local_lb_mc[0x1];
u8 log_min_hairpin_wq_data_sz[0x5];
u8 reserved_at_3e8[0x3];
>>>>>>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2018-01-11
1) Don't allow to change the encap type on state updates.
The encap type is set on state initialization and
should not change anymore. From Herbert Xu.
2) Skip dead policies when rehashing to fix a
slab-out-of-bounds bug in xfrm_hash_rebuild.
From Florian Westphal.
3) Two buffer overread fixes in pfkey.
From Eric Biggers.
4) Fix rcu usage in xfrm_get_type_offload,
request_module can sleep, so can't be used
under rcu_read_lock. From Sabrina Dubroca.
5) Fix an uninitialized lock in xfrm_trans_queue.
Use __skb_queue_tail instead of skb_queue_tail
in xfrm_trans_queue as we don't need the lock.
From Herbert Xu.
6) Currently it is possible to create an xfrm state with an
unknown encap type in ESP IPv4. Fix this by returning an
error on unknown encap types. Also from Herbert Xu.
7) Fix sleeping inside a spinlock in xfrm_policy_cache_flush.
From Florian Westphal.
8) Fix ESP GRO when the headers not fully in the linear part
of the skb. We need to pull before we can access them.
9) Fix a skb leak on error in key_notify_policy.
10) Fix a race in the xdst pcpu cache, we need to
run the resolver routines with bottom halfes
off like the old flowcache did.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJaV5ghAAoJEEp/3jgCEfOL/bEH/3UopVYhLpHPqIAGCQuONuvG
4imm/19uVIsbJMCHZ/bbksPPOaswqCKws5ScfIJKzg9vI8PQaQ28BnQh/vELHlmk
lUgdXgVPaCoM/3UlCquxmBn5IooLt0t7LdCvMO2MvF3mf+jThyfwcoc1H2xe1Yh2
k9dPQWcfNBY7jGTBGzqyuNwfg9DZSMyBRx4JmOsqlCI/GDcA8DsLHIykA4wRQRF+
gtSCYeUuZsfukCk4Z1ImoYyfbtK/tYH4s9UOc5pEsd0s0NUs8bn7hgQn2QKWmQt4
HsOzNTiAl/pXSRi8BMqPyFGVdZLT1cRkeo/FW1Lkxg5NqJmv005ebJ1Jx8YHW9A=
=JTlC
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"Two rbd fixes for 4.12 and 4.2 issues respectively, marked for
stable"
* tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client:
rbd: set max_segments to USHRT_MAX
rbd: reacquire lock should update lock owner client id
introduced by yours truly.
-----BEGIN PGP SIGNATURE-----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=S8Fj
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"Fix a raw vs elaborate GPIO descriptor bug introduced by yours truly"
* tag 'gpio-v4.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()
To avoid configuration override, timestamp set call will
be moved from the netdevice open flow to the init flow.
By this, a close-open procedure will not override the timestamp
configuration.
In addition, the change will rename mlx5e_timestamp_set function
to be mlx5e_timestamp_init.
Fixes: ef9814deaf ("net/mlx5e: Add HW timestamping (TS) support")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
PPS event did not update ptp_clock_event fields, therefore,
timestamp value was not updated correctly. This fix updates the
event source and the timestamp value for each PPS event.
Fixes: 7c39afb394 ("net/mlx5: PTP code migration to driver core section")
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Set features function sets dev->features in order to keep track of which
features were successfully changed and which weren't (in case the user
asks for more than one change in a single command).
This breaks the logic in __netdev_update_features which assumes that
dev->features is not changed on success and checks for diffs between
features and dev->features (diffs that might not exist at this point
because of the driver override).
The solution is to keep track of successful/failed feature changes and
assign them to dev->features in case of failure only.
Fixes: 0e405443e8 ("net/mlx5e: Improve set features ndo resiliency")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Should not do the following swap between TCs 0 and 1
when max num of TCs is 1:
tclass[prio=0]=1, tclass[prio=1]=0, tclass[prio=i]=i (for i>1)
Fixes: 08fb1dacdd ("net/mlx5e: Support DCBNL IEEE ETS")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
ethtool statistics should be updated even when the interface is down
since it shows more than just netdev counters, which might change while
the logical link is down.
One useful use case, for example, is when running RoCE traffic over the
interface (while the logical link is down, but physical link is up) and
examining rx_prioX_bytes.
Fixes: f62b8bb8f2 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
We didn't store the result of mlx5_init_once, due to that
mlx5_load_one returned success on error. Fix that.
Fixes: 59211bd3b6 ("net/mlx5: Split the load/unload flow into hardware and software flows")
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Change mlx5_get_uars_page to return ERR_PTR in case of
allocation failure. Change all callers accordingly to
check the IS_ERR(ptr) instead of NULL.
Fixes: 59211bd3b6 ("net/mlx5: Split the load/unload flow into hardware and software flows")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Fix a memory leak where in case that pci_alloc_irq_vectors failed,
priv->irq_info was not released.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5_get_vector_affinity used to call pci_irq_get_affinity and after
reverting the patch that sets the device affinity via PCI_IRQ_AFFINITY
API, calling pci_irq_get_affinity becomes useless and it breaks RDMA
mlx5 users. To fix this, this patch provides an alternative way to
retrieve IRQ vector affinity using legacy IRQ API, following
smp_affinity read procfs implementation.
Fixes: 231243c827 ("Revert mlx5: move affinity hints assignments to generic code")
Fixes: a435393aca ("mlx5: move affinity hints assignments to generic code")
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
There are systems platform information management interfaces (such as
HOST2BMC) for which we cannot disable local loopback multicast traffic.
Separate disable_local_lb_mc and disable_local_lb_uc capability bits so
driver will not disable multicast loopback traffic if not supported.
(It is expected that Firmware will not set disable_local_lb_mc if
HOST2BMC is running for example.)
Function mlx5_nic_vport_update_local_lb will do best effort to
disable/enable UC/MC loopback traffic and return success only in case it
succeeded to changed all allowed by Firmware.
Adapt mlx5_ib and mlx5e to support the new cap bits.
Fixes: 2c43c5a036 ("net/mlx5e: Enable local loopback in loopback selftest")
Fixes: c85023e153 ("IB/mlx5: Add raw ethernet local loopback support")
Fixes: bded747bb4 ("net/mlx5: Add raw ethernet local loopback firmware command")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Pull vfs regression fix from Al Viro/
Fix a leak in socket() introduced by commit 8e1611e235 ("make
sock_alloc_file() do sock_release() on failures").
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Fix a leak in socket(2) when we fail to allocate a file descriptor.
Pull networking fixes from David Miller:
1) BPF speculation prevention and BPF_JIT_ALWAYS_ON, from Alexei
Starovoitov.
2) Revert dev_get_random_name() changes as adjust the error code
returns seen by userspace definitely breaks stuff.
3) Fix TX DMA map/unmap on older iwlwifi devices, from Emmanuel
Grumbach.
4) From wrong AF family when requesting sock diag modules, from Andrii
Vladyka.
5) Don't add new ipv6 routes attached to the null_entry, from Wei Wang.
6) Some SCTP sockopt length fixes from Marcelo Ricardo Leitner.
7) Don't leak when removing VLAN ID 0, from Cong Wang.
8) Hey there's a potential leak in ipv6_make_skb() too, from Eric
Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
ipv6: sr: fix TLVs not being copied using setsockopt
ipv6: fix possible mem leaks in ipv6_make_skb()
mlxsw: spectrum_qdisc: Don't use variable array in mlxsw_sp_tclass_congestion_enable
mlxsw: pci: Wait after reset before accessing HW
nfp: always unmask aux interrupts at init
8021q: fix a memory leak for VLAN 0 device
of_mdio: avoid MDIO bus removal when a PHY is missing
caif_usb: use strlcpy() instead of strncpy()
doc: clarification about setting SO_ZEROCOPY
net: gianfar_ptp: move set_fipers() to spinlock protecting area
sctp: make use of pre-calculated len
sctp: add a ceiling to optlen in some sockopts
sctp: GFP_ATOMIC is not needed in sctp_setsockopt_events
bpf: introduce BPF_JIT_ALWAYS_ON config
bpf: avoid false sharing of map refcount with max_entries
ipv6: remove null_entry before adding default route
SolutionEngine771x: add Ether TSU resource
SolutionEngine771x: fix Ether platform data
docs-rst: networking: wire up msg_zerocopy
net: ipv4: emulate READ_ONCE() on ->hdrincl bit-field in raw_sendmsg()
...
Got broken by "make sock_alloc_file() do sock_release() on failures" -
cleanup after sock_map_fd() failure got pulled all the way into
sock_alloc_file(), but it used to serve the case when sock_map_fd()
failed *before* getting to sock_alloc_file() as well, and that got
lost. Trivial to fix, fortunately.
Fixes: 8e1611e235 (make sock_alloc_file() do sock_release() on failures)
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
syzkaller tried to alloc a map with 0xfffffffd entries out of a userns,
and thus unprivileged. With the recently added logic in b2157399cc
("bpf: prevent out-of-bounds speculation") we round this up to the next
power of two value for max_entries for unprivileged such that we can
apply proper masking into potentially zeroed out map slots.
However, this will generate an index_mask of 0xffffffff, and therefore
a + 1 will let this overflow into new max_entries of 0. This will pass
allocation, etc, and later on map access we still enforce on the original
attr->max_entries value which was 0xfffffffd, therefore triggering GPF
all over the place. Thus bail out on overflow in such case.
Moreover, on 32 bit archs roundup_pow_of_two() can also not be used,
since fls_long(max_entries - 1) can result in 32 and 1UL << 32 in 32 bit
space is undefined. Therefore, do this by hand in a 64 bit variable.
This fixes all the issues triggered by syzkaller's reproducers.
Fixes: b2157399cc ("bpf: prevent out-of-bounds speculation")
Reported-by: syzbot+b0efb8e572d01bce1ae0@syzkaller.appspotmail.com
Reported-by: syzbot+6c15e9744f75f2364773@syzkaller.appspotmail.com
Reported-by: syzbot+d2f5524fb46fd3b312ee@syzkaller.appspotmail.com
Reported-by: syzbot+61d23c95395cc90dbc2b@syzkaller.appspotmail.com
Reported-by: syzbot+0d363c942452cca68c01@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following snippet was throwing an 'unknown opcode cc' warning
in BPF interpreter:
0: (18) r0 = 0x0
2: (7b) *(u64 *)(r10 -16) = r0
3: (cc) (u32) r0 s>>= (u32) r0
4: (95) exit
Although a number of JITs do support BPF_ALU | BPF_ARSH | BPF_{K,X}
generation, not all of them do and interpreter does neither. We can
leave existing ones and implement it later in bpf-next for the
remaining ones, but reject this properly in verifier for the time
being.
Fixes: 17a5267067 ("bpf: verifier (add verifier core)")
Reported-by: syzbot+93c4904c5c70348a6890@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Trivial fix to spelling mistake in error message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Function ipv6_push_rthdr4 allows to add an IPv6 Segment Routing Header
to a socket through setsockopt, but the current implementation doesn't
copy possible TLVs at the end of the SRH received from userspace.
Therefore, the execution of the following branch if (sr_has_hmac(sr_phdr))
{ ... } will never complete since the len and type fields of a possible
HMAC TLV are not copied, hence seg6_get_tlv_hmac will return an error,
and the HMAC will not be computed.
This commit adds a memcpy in case TLVs have been appended to the SRH.
Fixes: a149e7c7ce ("ipv6: sr: add support for SRH injection through setsockopt")
Acked-by: David Lebrun <dlebrun@google.com>
Signed-off-by: Mathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip6_setup_cork() might return an error, while memory allocations have
been done and must be rolled back.
Fixes: 6422398c2a ("ipv6: introduce ipv6_make_skb")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Reported-by: Mike Maloney <maloney@google.com>
Acked-by: Mike Maloney <maloney@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
mlxsw: couple of fixes
Couple of small fixes for mlxsw driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Resolve the sparse warning:
"sparse: Variable length array is used."
Use 2 arrays for 2 PRM register accesses.
Fixes: 96f17e0776 ("mlxsw: spectrum: Support RED qdisc offload")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After performing reset driver polls on HW indication until learning
that the reset is done, but immediately after reset the device becomes
unresponsive which might lead to completion timeout on the first read.
Wait for 100ms before starting the polling.
Fixes: 233fa44bd6 ("mlxsw: pci: Implement reset done check")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The link state and exception interrupts may be masked when we probe.
The firmware should in theory prevent sending (and automasking) those
interrupts if the device is disabled, but if my reading of the FW code
is correct there are firmwares out there with race conditions in this
area. The interrupt may also be masked if previous driver which used
the device was malfunctioning and we didn't load the FW (there is no
other good way to comprehensively reset the PF).
Note that FW unmasks the data interrupts by itself when vNIC is
enabled, such helpful operation is not performed for LSC/EXN interrupts.
Always unmask the auxiliary interrupts after request_irq(). On the
remove path add missing PCI write flush before free_irq().
Fixes: 4c3523623d ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A vlan device with vid 0 is allow to creat by not able to be fully
cleaned up by unregister_vlan_dev() which checks for vlan_id!=0.
Also, VLAN 0 is probably not a valid number and it is kinda
"reserved" for HW accelerating devices, but it is probably too
late to reject it from creation even if makes sense. Instead,
just remove the check in unregister_vlan_dev().
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: ad1afb0039 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)")
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hopefully the last set of fixes for 4.15.
iwlwifi
* fix DMA mapping regression since v4.14
wcn36xx
* fix dynamic power save which has been broken since the driver was commited
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJaVLeaAAoJEG4XJFUm622bYBUH/2NhQwUJbKIrbxYhYpo0d++8
GK3TjxpzTByCe0nXGUT5iuDaY72i9C2UoLhFQ5smVg04pE0IXQQjZus6vSGx4biz
GUave/SkzL0EruUXjXLBYWiYDND4iynk82gWX2/Lh7qGoT2SQfD5cKz0cMdE5NrW
E7Q1CMiaoB0i9jcksaU2uWA0XPwISxl61kU2dXuKHQOJ1CW1goI/YIHsBajshHmi
ZEfMqxZFE+jz2Kkp4tKhvG/Xva0ylJv8bwK8CMK6MqA8oa3xdgOhv67E9mm7IGpD
ETrRLJNnWGJlnod5u7QOZWcS01gAgT5whCqDl/lTEty0823kvjMQdwckQaIU+AE=
=me16
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2018-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 4.15
Hopefully the last set of fixes for 4.15.
iwlwifi
* fix DMA mapping regression since v4.14
wcn36xx
* fix dynamic power save which has been broken since the driver was commited
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If one of the child devices is missing the of_mdiobus_register_phy()
call will return -ENODEV. When a missing device is encountered the
registration of the remaining PHYs is stopped and the MDIO bus will
fail to register. Propagate all errors except ENODEV to avoid it.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc-8 reports
net/caif/caif_usb.c: In function 'cfusbl_device_notify':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may
be truncated copying 15 bytes from a string of length 15
[-Wstringop-truncation]
The compiler require that the input param 'len' of strncpy() should be
greater than the length of the src string, so that '\0' is copied as
well. We can just use strlcpy() to avoid this warning.
Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Kornilios Kourtis <kou@zurich.ibm.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
set_fipers() calling should be protected by spinlock in
case that any interrupt breaks related registers setting
and the function we expect. This patch is to move set_fipers()
to spinlock protecting area in ptp_gianfar_adjtime().
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marcelo Ricardo Leitner says:
====================
sctp: Some sockopt optlen fixes
Hangbin Liu reported that some SCTP sockopt are allowing the user to get
the kernel to allocate really large buffers by not having a ceiling on
optlen.
This patchset address this issue (in patch 2), replace an GFP_ATOMIC
that isn't needed and avoid calculating the option size multiple times
in some setsockopt.
====================
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some sockopt handling functions were calculating the length of the
buffer to be written to userspace and then calculating it again when
actually writing the buffer, which could lead to some write not using
an up-to-date length.
This patch updates such places to just make use of the len variable.
Also, replace some sizeof(type) to sizeof(var).
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu reported that some sockopt calls could cause the kernel to log
a warning on memory allocation failure if the user supplied a large optlen
value. That is because some of them called memdup_user() without a ceiling
on optlen, allowing it to try to allocate really large buffers.
This patch adds a ceiling by limiting optlen to the maximum allowed that
would still make sense for these sockopt.
Reported-by: Hangbin Liu <haliu@redhat.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So replace it with GFP_USER and also add __GFP_NOWARN.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A collection of the last-minute small PCM fixes:
- A workaround for the recent regression wrt PulseAudio
- Removal of spurious WARN_ON() that is triggered by syzkaller
- Fixes for aloop, hardening racy accesses
- Fixes in PCM OSS emulation wrt the unabortable loops that may cause
RCU stall
-----BEGIN PGP SIGNATURE-----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=Fz+p
-----END PGP SIGNATURE-----
Merge tag 'sound-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of the last-minute small PCM fixes:
- A workaround for the recent regression wrt PulseAudio
- Removal of spurious WARN_ON() that is triggered by syzkaller
- Fixes for aloop, hardening racy accesses
- Fixes in PCM OSS emulation wrt the unabortable loops that may cause
RCU stall"
* tag 'sound-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Allow aborting mutex lock at OSS read/write loops
ALSA: pcm: Abort properly at pending signal in OSS read/write loops
ALSA: aloop: Fix racy hw constraints adjustment
ALSA: aloop: Fix inconsistent format due to incomplete rule
ALSA: aloop: Release cable upon open error path
ALSA: pcm: Workaround for weird PulseAudio behavior on rewind error
ALSA: pcm: Add missing error checks in OSS emulation plugin builder
ALSA: pcm: Remove incorrect snd_BUG_ON() usages
Daniel Borkmann says:
====================
pull-request: bpf 2018-01-09
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Prevent out-of-bounds speculation in BPF maps by masking the
index after bounds checks in order to fix spectre v1, and
add an option BPF_JIT_ALWAYS_ON into Kconfig that allows for
removing the BPF interpreter from the kernel in favor of
JIT-only mode to make spectre v2 harder, from Alexei.
2) Remove false sharing of map refcount with max_entries which
was used in spectre v1, from Daniel.
3) Add a missing NULL psock check in sockmap in order to fix
a race, from John.
4) Fix test_align BPF selftest case since a recent change in
verifier rejects the bit-wise arithmetic on pointers
earlier but test_align update was missing, from Alexei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit f11a04464a ("i2c: gpio: Enable working over slow
can_sleep GPIOs"), probing the i2c RTC connected to an i2c-gpio bus on
r8a7740/armadillo fails with:
rtc-s35390a 0-0030: error resetting chip
rtc-s35390a: probe of 0-0030 failed with error -5
More debug code reveals:
i2c i2c-0: master_xfer[0] R, addr=0x30, len=1
i2c i2c-0: NAK from device addr 0x30 msg #0
s35390a_get_reg: ret = -6
Commit 02e479808b ("gpio: Alter semantics of *raw* operations to
actually be raw") moved open drain/source handling from
gpiod_set_raw_value_commit() to gpiod_set_value(), but forgot to take
into account that gpiod_set_value_cansleep() also needs this handling.
The i2c protocol mandates that i2c signals are open drain, hence i2c
communication fails.
Fix this by adding the missing handling to gpiod_set_value_cansleep(),
using a new common helper gpiod_set_value_nocheck().
Fixes: 02e479808b ("gpio: Alter semantics of *raw* operations to actually be raw")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[removed underscore syntax, added kerneldoc]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We need to run xfrm_resolve_and_create_bundle() with
bottom halves off. Otherwise we may reuse an already
released dst_enty when the xfrm lookup functions are
called from process context.
Fixes: c30d78c14a813db39a647b6a348b428 ("xfrm: add xdst pcpu cache")
Reported-by: Darius Ski <darius.ski@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We leak the allocated out_skb in case
pfkey_xfrm_policy2msg() fails. Fix this
by freeing it on error.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This contains what I hope are the last RISC-V changes to go into 4.15.
I know it's a bit last minute, but I think they're all fairly small
changes:
* SR_* constants have been renamed to match the latest ISA
specification.
* Some CONFIG_MMU #ifdef cruft has been removed. We've never supported
!CONFIG_MMU.
* __NR_riscv_flush_icache is now visible to userspace. We were hoping
to avoid making this public in order to force userspace to call the
vDSO entry, but it looks like QEMU's user-mode emulation doesn't want
to emulate a vDSO. In order to allow glibc to fall back to a system
call when the vDSO entry doesn't exist we're just
* Our defconfig is no long empty. This is another one that just slipped
through the cracks. The defconfig isn't perfect, but it's at least
close to what users will want for the first RISC-V development board.
Getting closer is kind of splitting hairs here: none of the RISC-V
specific drivers are in yet, so it's not like things will boot out of
the box.
The only one that's strictly necessary is the __NR_riscv_flush_icache
change, as I want that to be part of the public API starting from our
first kernel so nobody has to worry about it. The others are nice to
haves, but they seem sane for 4.15 to me.
-----BEGIN PGP SIGNATURE-----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=PhUK
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.15-rc8_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains what I hope are the last RISC-V changes to go into 4.15.
I know it's a bit last minute, but I think they're all fairly small
changes:
- SR_* constants have been renamed to match the latest ISA
specification.
- Some CONFIG_MMU #ifdef cruft has been removed. We've never
supported !CONFIG_MMU.
- __NR_riscv_flush_icache is now visible to userspace. We were hoping
to avoid making this public in order to force userspace to call the
vDSO entry, but it looks like QEMU's user-mode emulation doesn't
want to emulate a vDSO. In order to allow glibc to fall back to a
system call when the vDSO entry doesn't exist we're just
- Our defconfig is no long empty. This is another one that just
slipped through the cracks. The defconfig isn't perfect, but it's
at least close to what users will want for the first RISC-V
development board. Getting closer is kind of splitting hairs here:
none of the RISC-V specific drivers are in yet, so it's not like
things will boot out of the box.
The only one that's strictly necessary is the __NR_riscv_flush_icache
change, as I want that to be part of the public API starting from our
first kernel so nobody has to worry about it. The others are nice to
haves, but they seem sane for 4.15 to me"
* tag 'riscv-for-linus-4.15-rc8_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/linux:
riscv: rename SR_* constants to match the spec
riscv: remove CONFIG_MMU ifdefs
RISC-V: Make __NR_riscv_flush_icache visible to userspace
RISC-V: Add a basic defconfig
Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes for 4.15.
- Maciej Rozycki found another series of FP issues which requires a
seven part series to restructure and fix.
- James fixes a warning about .set mt which gas doesn't like when
building for R1 processors"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Validate PR_SET_FP_MODE prctl(2) requests against the ABI of the task
MIPS: Disallow outsized PTRACE_SETREGSET NT_PRFPREG regset accesses
MIPS: Also verify sizeof `elf_fpreg_t' with PTRACE_SETREGSET
MIPS: Fix an FCSR access API regression with NT_PRFPREG and MSA
MIPS: Consistently handle buffer counter with PTRACE_SETREGSET
MIPS: Guard against any partial write attempt with PTRACE_SETREGSET
MIPS: Factor out NT_PRFPREG regset access helpers
MIPS: CPS: Fix r1 .set mt assembler warning
The BPF interpreter has been used as part of the spectre 2 attack CVE-2017-5715.
A quote from goolge project zero blog:
"At this point, it would normally be necessary to locate gadgets in
the host kernel code that can be used to actually leak data by reading
from an attacker-controlled location, shifting and masking the result
appropriately and then using the result of that as offset to an
attacker-controlled address for a load. But piecing gadgets together
and figuring out which ones work in a speculation context seems annoying.
So instead, we decided to use the eBPF interpreter, which is built into
the host kernel - while there is no legitimate way to invoke it from inside
a VM, the presence of the code in the host kernel's text section is sufficient
to make it usable for the attack, just like with ordinary ROP gadgets."
To make attacker job harder introduce BPF_JIT_ALWAYS_ON config
option that removes interpreter from the kernel in favor of JIT-only mode.
So far eBPF JIT is supported by:
x64, arm64, arm32, sparc64, s390, powerpc64, mips64
The start of JITed program is randomized and code page is marked as read-only.
In addition "constant blinding" can be turned on with net.core.bpf_jit_harden
v2->v3:
- move __bpf_prog_ret0 under ifdef (Daniel)
v1->v2:
- fix init order, test_bpf and cBPF (Daniel's feedback)
- fix offloaded bpf (Jakub's feedback)
- add 'return 0' dummy in case something can invoke prog->bpf_func
- retarget bpf tree. For bpf-next the patch would need one extra hunk.
It will be sent when the trees are merged back to net-next
Considered doing:
int bpf_jit_enable __read_mostly = BPF_EBPF_JIT_DEFAULT;
but it seems better to land the patch as-is and in bpf-next remove
bpf_jit_enable global variable from all JITs, consolidate in one place
and remove this jit_init() function.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Johannes Berg
Benjamin Beichler
Dominik Brodowski
David S. Miller
Linus Torvalds
Feras Daoud
Gal Pressman
Tariq Toukan
Maor Gottlieb
Eran Ben Elisha
Alaa Hleihel
Saeed Mahameed
Al Viro
Daniel Borkmann
Colin Ian King
Mathieu Xhonneux
Eric Dumazet
Jiri Pirko
Yuval Mintz
Jakub Kicinski
Cong Wang
Madalin Bucur
Xiongfeng Wang
Kornilios Kourtis
Yangbo Lu
Marcelo Ricardo Leitner
Geert Uytterhoeven
Steffen Klassert
Alexei Starovoitov