A negative value for rcutorture.n_barrier_cbs can pass a negative value
to the memory allocator, so this commit instead causes rcu_barrier()
testing to be disabled in this case.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This update makes arithmetic to calculate number of RCU nodes
more straight and easy to read.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although a number of RCU levels may be less than the current
maximum of four, some static data associated with each level
are allocated for all four levels. As result, the extra data
never get accessed and just wast memory. This update limits
count of allocated items to the number of used RCU levels.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Members rcu_state::levelcnt[] and rcu_state::levelspread[]
are only used at init. There is no reason to keep them
afterwards.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Number of items in rcu_capacity[] array is defined by macro
MAX_RCU_LVLS. However, that array is never accessed beyond
RCU_NUM_LVLS index. Therefore, we can limit the array to
RCU_NUM_LVLS items and eliminate MAX_RCU_LVLS. As result,
in most cases the memory is conserved.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Variable rcu_num_lvls is limited by RCU_NUM_LVLS macro.
In turn, rcu_state::levelcnt[] array is never accessed
beyond rcu_num_lvls. Thus, rcu_state::levelcnt[] is safe
to limit to RCU_NUM_LVLS items.
Since rcu_num_lvls could be changed during boot (as result
of rcutree.rcu_fanout_leaf kernel parameter update) one might
assume a new value could overflow the value of RCU_NUM_LVLS.
However, that is not the case, since leaf-level fanout is only
permitted to increase, resulting in rcu_num_lvls possibly to
decrease.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Current code suggests that introducing the extra level to
rcu_capacity[] array makes some of the arithmetic easier.
Well, in fact it appears rather confusing and unnecessary.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This update simplifies rcu_init_geometry() code flow
and makes calculation of the total number of rcu_node
structures more easy to read.
The update relies on the fact num_rcu_lvl[] is never
accessed beyond rcu_num_lvls index by the rest of the
code. Therefore, there is no need initialize the whole
num_rcu_lvl[].
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Local variable 'n' mimics 'nr_cpu_ids' while the both are
used within one function. There is no reason for 'n' to
exist whatsoever.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently a condition when RCU tree is unable to accommodate
the configured number of CPUs is not permitted and causes
a fall back to compile-time values. However, the code has no
means to exceed the RCU tree capacity neither at compile-time
nor in run-time. Therefore, if the condition is met in run-
time then it indicates a serios problem elsewhere and should
be handled with a panic.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Type-checking coccinelle spatches are being used to locate type mismatches
between function signatures and return values in this case this produced:
./kernel/rcu/srcu.c:271 WARNING: return of wrong type
int != unsigned long,
srcu_readers_active() returns an int that is the sum of per_cpu unsigned
long but the only user is cleanup_srcu_struct() which is using it as a
boolean (condition) to see if there is any readers rather than actually
using the approximate number of readers. The theoretically possible
unsigned long overflow case does not need to be handled explicitly - if
we had 4G++ readers then something else went wrong a long time ago.
proposal: change the return type to boolean. The function name is left
unchanged as it fits the naming expectation for a boolean.
patch was compile tested for x86_64_defconfig (implies CONFIG_SRCU=y)
patch is against 4.1-rc5 (localversion-next is -next-20150525)
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
DEBUG_LOCK_ALLOC=y is not a production setting, but it is
not very unusual either. Many developers routinely
use kernels built with it enabled.
Apart from being selected by hand, it is also auto-selected by
PROVE_LOCKING "Lock debugging: prove locking correctness" and
LOCK_STAT "Lock usage statistics" config options.
LOCK STAT is necessary for "perf lock" to work.
I wouldn't spend too much time optimizing it, but this particular
function has a very large cost in code size: when it is deinlined,
code size decreases by 830,000 bytes:
text data bss dec hex filename
85674192 22294776 20627456 128596424 7aa39c8 vmlinux.before
84837612 22294424 20627456 127759492 79d7484 vmlinux
(with this config: http://busybox.net/~vda/kernel_config)
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
CC: Tejun Heo <tj@kernel.org>
CC: Oleg Nesterov <oleg@redhat.com>
CC: linux-kernel@vger.kernel.org
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The RCU_USER_QS Kconfig parameter is now just a synonym for NO_HZ_FULL,
so this commit eliminates RCU_USER_QS, replacing all uses with NO_HZ_FULL.
Reported-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
"monitonic raw". Also some enhancements to make the ring buffer even
faster. But the biggest and most noticeable change is the renaming of
the ftrace* files, structures and variables that have to deal with
trace events.
Over the years I've had several developers tell me about their confusion
with what ftrace is compared to events. Technically, "ftrace" is the
infrastructure to do the function hooks, which include tracing and also
helps with live kernel patching. But the trace events are a separate
entity altogether, and the files that affect the trace events should
not be named "ftrace". These include:
include/trace/ftrace.h -> include/trace/trace_events.h
include/linux/ftrace_event.h -> include/linux/trace_events.h
Also, functions that are specific for trace events have also been renamed:
ftrace_print_*() -> trace_print_*()
(un)register_ftrace_event() -> (un)register_trace_event()
ftrace_event_name() -> trace_event_name()
ftrace_trigger_soft_disabled()-> trace_trigger_soft_disabled()
ftrace_define_fields_##call() -> trace_define_fields_##call()
ftrace_get_offsets_##call() -> trace_get_offsets_##call()
Structures have been renamed:
ftrace_event_file -> trace_event_file
ftrace_event_{call,class} -> trace_event_{call,class}
ftrace_event_buffer -> trace_event_buffer
ftrace_subsystem_dir -> trace_subsystem_dir
ftrace_event_raw_##call -> trace_event_raw_##call
ftrace_event_data_offset_##call-> trace_event_data_offset_##call
ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call
And a few various variables and flags have also been updated.
This has been sitting in linux-next for some time, and I have not heard
a single complaint about this rename breaking anything. Mostly because
these functions, variables and structures are mostly internal to the
tracing system and are seldom (if ever) used by anything external to that.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJViYhVAAoJEEjnJuOKh9ldcJ0IAI+mytwoMAN/CWDE8pXrTrgs
aHlcr1zorSzZ0Lq6lKsWP+V0VGVhP8KWO16vl35HaM5ZB9U+cDzWiGobI8JTHi/3
eeTAPTjQdgrr/L+ZO1ApzS1jYPhN3Xi5L7xublcYMJjKfzU+bcYXg/x8gRt0QbG3
S9QN/kBt0JIIjT7McN64m5JVk2OiU36LxXxwHgCqJvVCPHUrriAdIX7Z5KRpEv13
zxgCN4d7Jiec/FsMW8dkO0vRlVAvudZWLL7oDmdsvNhnLy8nE79UOeHos2c1qifQ
LV4DeQ+2Hlu7w9wxixHuoOgNXDUEiQPJXzPc/CuCahiTL9N/urQSGQDoOVMltR4=
=hkdz
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This patch series contains several clean ups and even a new trace
clock "monitonic raw". Also some enhancements to make the ring buffer
even faster. But the biggest and most noticeable change is the
renaming of the ftrace* files, structures and variables that have to
deal with trace events.
Over the years I've had several developers tell me about their
confusion with what ftrace is compared to events. Technically,
"ftrace" is the infrastructure to do the function hooks, which include
tracing and also helps with live kernel patching. But the trace
events are a separate entity altogether, and the files that affect the
trace events should not be named "ftrace". These include:
include/trace/ftrace.h -> include/trace/trace_events.h
include/linux/ftrace_event.h -> include/linux/trace_events.h
Also, functions that are specific for trace events have also been renamed:
ftrace_print_*() -> trace_print_*()
(un)register_ftrace_event() -> (un)register_trace_event()
ftrace_event_name() -> trace_event_name()
ftrace_trigger_soft_disabled() -> trace_trigger_soft_disabled()
ftrace_define_fields_##call() -> trace_define_fields_##call()
ftrace_get_offsets_##call() -> trace_get_offsets_##call()
Structures have been renamed:
ftrace_event_file -> trace_event_file
ftrace_event_{call,class} -> trace_event_{call,class}
ftrace_event_buffer -> trace_event_buffer
ftrace_subsystem_dir -> trace_subsystem_dir
ftrace_event_raw_##call -> trace_event_raw_##call
ftrace_event_data_offset_##call-> trace_event_data_offset_##call
ftrace_event_type_funcs_##call -> trace_event_type_funcs_##call
And a few various variables and flags have also been updated.
This has been sitting in linux-next for some time, and I have not
heard a single complaint about this rename breaking anything. Mostly
because these functions, variables and structures are mostly internal
to the tracing system and are seldom (if ever) used by anything
external to that"
* tag 'trace-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits)
ring_buffer: Allow to exit the ring buffer benchmark immediately
ring-buffer-benchmark: Fix the wrong type
ring-buffer-benchmark: Fix the wrong param in module_param
ring-buffer: Add enum names for the context levels
ring-buffer: Remove useless unused tracing_off_permanent()
ring-buffer: Give NMIs a chance to lock the reader_lock
ring-buffer: Add trace_recursive checks to ring_buffer_write()
ring-buffer: Allways do the trace_recursive checks
ring-buffer: Move recursive check to per_cpu descriptor
ring-buffer: Add unlikelys to make fast path the default
tracing: Rename ftrace_get_offsets_##call() to trace_event_get_offsets_##call()
tracing: Rename ftrace_define_fields_##call() to trace_event_define_fields_##call()
tracing: Rename ftrace_event_type_funcs_##call to trace_event_type_funcs_##call
tracing: Rename ftrace_data_offset_##call to trace_event_data_offset_##call
tracing: Rename ftrace_raw_##call event structures to trace_event_raw_##call
tracing: Rename ftrace_trigger_soft_disabled() to trace_trigger_soft_disabled()
tracing: Rename FTRACE_EVENT_FL_* flags to EVENT_FILE_FL_*
tracing: Rename struct ftrace_subsystem_dir to trace_subsystem_dir
tracing: Rename ftrace_event_name() to trace_event_name()
tracing: Rename FTRACE_MAX_EVENT to TRACE_EVENT_TYPE_MAX
...
Pull timer updates from Thomas Gleixner:
"A rather largish update for everything time and timer related:
- Cache footprint optimizations for both hrtimers and timer wheel
- Lower the NOHZ impact on systems which have NOHZ or timer migration
disabled at runtime.
- Optimize run time overhead of hrtimer interrupt by making the clock
offset updates smarter
- hrtimer cleanups and removal of restrictions to tackle some
problems in sched/perf
- Some more leap second tweaks
- Another round of changes addressing the 2038 problem
- First step to change the internals of clock event devices by
introducing the necessary infrastructure
- Allow constant folding for usecs/msecs_to_jiffies()
- The usual pile of clockevent/clocksource driver updates
The hrtimer changes contain updates to sched, perf and x86 as they
depend on them plus changes all over the tree to cleanup API changes
and redundant code, which got copied all over the place. The y2038
changes touch s390 to remove the last non 2038 safe code related to
boot/persistant clock"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits)
clocksource: Increase dependencies of timer-stm32 to limit build wreckage
timer: Minimize nohz off overhead
timer: Reduce timer migration overhead if disabled
timer: Stats: Simplify the flags handling
timer: Replace timer base by a cpu index
timer: Use hlist for the timer wheel hash buckets
timer: Remove FIFO "guarantee"
timers: Sanitize catchup_timer_jiffies() usage
hrtimer: Allow hrtimer::function() to free the timer
seqcount: Introduce raw_write_seqcount_barrier()
seqcount: Rename write_seqcount_barrier()
hrtimer: Fix hrtimer_is_queued() hole
hrtimer: Remove HRTIMER_STATE_MIGRATE
selftest: Timers: Avoid signal deadlock in leap-a-day
timekeeping: Copy the shadow-timekeeper over the real timekeeper last
clockevents: Check state instead of mode in suspend/resume path
selftests: timers: Add leap-second timer edge testing to leap-a-day.c
ntp: Do leapsecond adjustment in adjtimex read path
time: Prevent early expiry of hrtimers[CLOCK_REALTIME] at the leap second edge
ntp: Introduce and use SECS_PER_DAY macro instead of 86400
...
Eric reported that the timer_migration sysctl is not really nice
performance wise as it needs to check at every timer insertion whether
the feature is enabled or not. Further the check does not live in the
timer code, so we have an extra function call which checks an extra
cache line to figure out that it is disabled.
We can do better and store that information in the per cpu (hr)timer
bases. I pondered to use a static key, but that's a nightmare to
update from the nohz code and the timer base cache line is hot anyway
when we select a timer base.
The old logic enabled the timer migration unconditionally if
CONFIG_NO_HZ was set even if nohz was disabled on the kernel command
line.
With this modification, we start off with migration disabled. The user
visible sysctl is still set to enabled. If the kernel switches to NOHZ
migration is enabled, if the user did not disable it via the sysctl
prior to the switch. If nohz=off is on the kernel command line,
migration stays disabled no matter what.
Before:
47.76% hog [.] main
14.84% [kernel] [k] _raw_spin_lock_irqsave
9.55% [kernel] [k] _raw_spin_unlock_irqrestore
6.71% [kernel] [k] mod_timer
6.24% [kernel] [k] lock_timer_base.isra.38
3.76% [kernel] [k] detach_if_pending
3.71% [kernel] [k] del_timer
2.50% [kernel] [k] internal_add_timer
1.51% [kernel] [k] get_nohz_timer_target
1.28% [kernel] [k] __internal_add_timer
0.78% [kernel] [k] timerfn
0.48% [kernel] [k] wake_up_nohz_cpu
After:
48.10% hog [.] main
15.25% [kernel] [k] _raw_spin_lock_irqsave
9.76% [kernel] [k] _raw_spin_unlock_irqrestore
6.50% [kernel] [k] mod_timer
6.44% [kernel] [k] lock_timer_base.isra.38
3.87% [kernel] [k] detach_if_pending
3.80% [kernel] [k] del_timer
2.67% [kernel] [k] internal_add_timer
1.33% [kernel] [k] __internal_add_timer
0.73% [kernel] [k] timerfn
0.54% [kernel] [k] wake_up_nohz_cpu
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Joonwoo Park <joonwoop@codeaurora.org>
Cc: Wenbo Wang <wenbo.wang@memblaze.com>
Link: http://lkml.kernel.org/r/20150526224512.127050787@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The current rcutorture testing does not do any cleanup operations.
This works because the srcu_struct is statically allocated, but it
does represent a memory leak of the associated dynamically allocated
->per_cpu_ref per-CPU variables. However, rcutorture currently uses
a statically allocated srcu_struct, which cannot legally be passed to
cleanup_srcu_struct(). Therefore, this commit adds a second form
of srcu (called srcud) that dynamically allocates and frees the
associated per-CPU variables. This commit also adds a ->cleanup()
member to rcu_torture_ops that is invoked at the end of the test,
after ->cb_barriers(). This ->cleanup() pointer is NULL for all
existing tests, and thus only used for scrud. Finally, the SRCU-P
torture-test configuration selects scrud instead of srcu, with SRCU-N
continuing to use srcu, thereby testing both static and dynamic
srcu_struct structures.
Reported-by: "Ahmed, Iftekhar" <ahmedi@onid.oregonstate.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcutorture.c file uses several explicit memory barriers that can
easily be converted to smp_store_release() and smp_load_acquire(), which
improves maintainability and also improves performance a bit.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
By default, with rcutorture.nreaders equal to -1, rcutorture provisions
N-1 reader kthreads, where N is the number of CPUs. This avoids
rcutorture-induced stalls, but also avoids heavier levels of torture.
This commit therefore allows negative values of rcutorture.nreaders
to specify larger numbers of reader kthreads, so that for example
rcutorture.nreaders=-2 provisions N kthreads and rcutorture.nreaders=-5
provisions N+3 kthreads.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Update documentation, as suggested by Josh Triplett. ]
If, at the time __rcu_process_callbacks() is invoked, there are callbacks
in Tiny RCU's callback list, but none of them are ready to be invoked,
the current list-management code will knit the non-ready callbacks out
of the list. This can result in hangs and possibly worse. This commit
therefore inserts a check for there being no callbacks that can be
invoked immediately.
This bug is unlikely to occur -- you have to get a new callback between
the time rcu_sched_qs() or rcu_bh_qs() was called, but before we get to
__rcu_process_callbacks(). It was detected by the addition of RCU-bh
testing to rcutorture, which in turn was instigated by Iftekhar Ahmed's
mutation testing. Although this bug was made much more likely by
915e8a4fe4 (rcu: Remove fastpath from __rcu_process_callbacks()), this
did not cause the bug, but rather made it much more probable. That
said, it takes more than 40 hours of rcutorture testing, on average,
for this bug to appear, so this fix cannot be considered an emergency.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The Tiny RCU counterparts to rcu_idle_enter(), rcu_idle_exit(),
rcu_irq_enter(), and rcu_irq_exit() are empty functions, but each has
EXPORT_SYMBOL_GPL(), which needlessly consumes extra memory, especially
in kernels built with module support. This commit therefore moves these
functions to static inlines in rcutiny.h, removing the need for exports.
This won't affect the size of the tiniest kernels, which are likely
built without module support, but might help semi-tiny kernels that
might include module support.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit applies some warning-omission micro-optimizations to RCU's
various extended-quiescent-state functions, which are on the kernel/user
hotpath for CONFIG_NO_HZ_FULL=y.
Reported-by: Rik van Riel <riel@redhat.com>
Reported by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit updates the initialization of the kthread_prio boot parameter
so that RCU will build even when CONFIG_RCU_KTHREAD_PRIO is undefined.
The kthread_prio boot parameter is set to CONFIG_RCU_KTHREAD_PRIO if
that is defined, otherwise to 1 if CONFIG_RCU_BOOST is defined and
to zero otherwise. This commit then makes CONFIG_RCU_KTHREAD_PRIO
depend on CONFIG_RCU_EXPERT, so that Kconfig users won't be asked about
CONFIG_RCU_KTHREAD_PRIO unless they want to be.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit introduces an RCU_FANOUT_LEAF C-preprocessor macro so
that RCU will build even when CONFIG_RCU_FANOUT_LEAF is undefined.
The RCU_FANOUT_LEAF macro is set to the value of CONFIG_RCU_FANOUT_LEAF
when defined, otherwise it is set to 32 for 32-bit systems and 64 for
64-bit systems. This commit then makes CONFIG_RCU_FANOUT_LEAF depend
on CONFIG_RCU_EXPERT, so that Kconfig users won't be asked about
CONFIG_RCU_FANOUT_LEAF unless they want to be.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
This commit introduces an RCU_FANOUT C-preprocessor macro so that RCU will
build even when CONFIG_RCU_FANOUT is undefined. The RCU_FANOUT macro is
set to the value of CONFIG_RCU_FANOUT when defined, otherwise it is set
to 32 for 32-bit systems and 64 for 64-bit systems. This commit then
makes CONFIG_RCU_FANOUT depend on CONFIG_RCU_EXPERT, so that Kconfig
users won't be asked about CONFIG_RCU_FANOUT unless they want to be.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The purpose of this commit is to make it easier to verify that RCU's
combining tree is set up correctly, which is useful to have when making
changes in how that tree is initialized.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
[ paulmck: Fold fix found by Fengguang's 0-day test robot. ]
The CONFIG_RCU_FANOUT_EXACT Kconfig parameter is used primarily (and
perhaps only) by rcutorture to verify that RCU works correctly in specific
rcu_node combining-tree configurations. It therefore does not make
much sense have this as a question to people attempting to configure
their kernels. So this commit creates an rcutree.rcu_fanout_exact=
boot parameter that rcutorture can use, and eliminates the original
CONFIG_RCU_FANOUT_EXACT Kconfig parameter.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Grace-period scans of the rcu_node combining tree normally
proceed quite quickly, so that it is very difficult to reproduce
races against them. This commit therefore allows grace-period
pre-initialization and cleanup to be artificially slowed down,
increasing race-reproduction probability. A pair of pairs of new
Kconfig parameters are provided, RCU_TORTURE_TEST_SLOW_PREINIT to
enable the slowing down of propagating CPU-hotplug changes up the
combining tree along with RCU_TORTURE_TEST_SLOW_PREINIT_DELAY to
specify the delay in jiffies, and RCU_TORTURE_TEST_SLOW_CLEANUP
to enable the slowing down of the end-of-grace-period cleanup scan
along with RCU_TORTURE_TEST_SLOW_CLEANUP_DELAY to specify the delay
in jiffies. Boot-time parameters named rcutree.gp_preinit_delay and
rcutree.gp_cleanup_delay allow these delays to be specified at boot time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because gcc doesn't realize that rcu_num_lvls must be strictly greater
than zero, some versions give a spurious warning about levelcnt[0] being
uninitialized in rcu_init_one(). This commit updates the condition on
the pre-existing panic() in order to educate gcc on this point.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, the larger the gp_init_delay boot parameter, the slower
rcutorture will sequence through grace periods. This commit avoids this
issue by decreasing the probability of slowing initialization of a given
grace period as the degree of slowness increases.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_data structure's ->rcu_qs_ctr_snap field is initialized at
CPU-online time from the current CPU's element of the per-CPU rcu_qs_ctr
variable. Unfortunately, this is at CPU_UP_PREPARE time, so has nothing
to do with the CPU being onlined. This commit therefore initializes
this variable from the incoming CPU's element of rcu_qs_ctr.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because offline CPUs are propagated up the rcu_node tree's ->qsmaskinit
bits just before each grace period starts, the ->qsmaskinit bit cannot
be clear when the corresponding ->qsmask bit is set. Furthermore, this
condition used to correspond to a CPU that was on its way offline, and
making RCU's notion of an offline CPU more precise has eliminated this
situation. This commit therefore removes the now-redundant offline
check from force_qs_rnp().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because force_qs_rnp() is invoked only from the force-quiescent-state
code which runs only in the context of the grace-period kthread, a grace
period must always be in progress throughout force_qs_rnp()'s execution.
This commit therefore removes the rcu_gp_in_progress() check and the
associated dead code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tasks are no longer migrated away from a given rcu_node structure
when all CPUs corresponding to that rcu_node structure have gone offline.
This means that rcu_read_unlock_special() no longer needs to loop
retrying rcu_node ->lock acquisition because the current task is
guaranteed to stay put.
This commit takes a small and paranoid step towards relying on this
guarantee by placing a WARN_ON_ONCE() just after the early exit from
the lock-acquisition loop.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes a HOTPLUG_CPU #ifdef, replacing it with
IS_ENABLED()-protected return statements. This relies on the
optimizer to remove any resulting dead code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu_cpu_has_callbacks() is declared int. The current declaration was introduced
in commit c0f4dfd4f9 (rcu: Make RCU_FAST_NO_HZ take advantage of numbered
callbacks). But it is actually returning bool and as the function description
states " * Return true if the specified CPU has any callback....", this probably
should be a bool as all (3) call-sites currently treat it as bool.
Type-checking coccinelle spatches are being used to locate type mismatches
between function signatures and return values in this case this produced:
./kernel/rcu/tree.c:3538 WARNING: return of wrong type
int != bool,
Patch was compile tested with x86_64_defconfig (implies CONFIG_TREE_RCU=y)
Patch is against 4.1-rc3 (localversion-next is -next-20150511) and fixes
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
rcu_bh_data, rcu_sched_data and rcu_preempt_data are never used outside
kernel/rcu/tree.c and thus can be made static.
Doing so fixes a section mismatch warning reported by clang when
building LLVMLinux with -Wsection, because these variables were declared
in .data..percpu and defined in .data..percpu..shared_aligned since
commit 11bbb235c2 ("rcu: Use DEFINE_PER_CPU_SHARED_ALIGNED for
rcu_data").
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, synchronize_sched_expedited() will call synchronize_sched()
if there is danger of counter wrap. But if configuration says to
always do expedited grace periods, synchronize_sched() will just
call synchronize_sched_expedited() right back again. In theory,
the old expedited operations will complete, the counters will
get back in synch, and the recursion will end. But we could
easily run out of stack long before that time. This commit
therefore makes synchronize_sched_expedited() invoke the underlying
wait_rcu_gp(call_rcu_sched) instead of synchronize_sched(), the same as
all the other calls out from synchronize_sched_expedited().
This bug was introduced by commit 1924bcb025 (Avoid counter wrap in
synchronize_sched_expedited()).
Reported-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds grace number and command-flags information to the
"kthread starved" message that is sometimes printed out as part of
RCU CPU stall warnings. This message is caused by the corresponding
RCU grace-period kthread not having run for at least two seconds, and
this added information can be helpful when debugging.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The first item list_for_each_entry_continue(alist) iterates over is
alist->next, rather than alist itself. Consequently,
rcu_print_detail_task_stall_rnp() skips the task referenced by gp_tasks.
Use gp_tasks->prev as the argument to list_for_each_entry_continue()
instead.
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Use the normal return values for bool functions
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_gp_kthread_wake() refuses to do a wakeup unless at least
one of the ->gp_flags bits are set, which normally will not be the
case when the last quiescent state is reported. This results in
up to a 3-jiffy delay given default Kconfig settings. This commit
therefore has rcu_report_qs_rsp() set RCU_GP_FLAG_FQS before invoking
rcu_gp_kthread_wake() in order to force a more immediate wakeup at
grace-period end, thus reducing grace-period latencies.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit converts several CONFIG_RCU_NOCB_CPU_ALL #ifdefs to
instead use IS_ENABLED(). This change should help avoid hiding
code from compiler diagnostics.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit creates an immutable rcu_data_p pointer that references
rcu_preempt_data for TREE_PREEMPT_RCU builds and that references
rcu_sched_data for TREE_RCU builds. This rcu_data_p pointer will enable
more code to move from #ifdef to IS_ENABLED().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a "const" tag to the declarations of rcu_state_p,
which should allow the compiler to generate better code and also to
catch erroneous assignments to this variable.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit removes a few RCU_BOOST #ifdefs, replacing them with
IS_ENABLED()-protected return statements. This relies on the
optimizer to remove any resulting dead code. There are several other
RCU_BOOST #ifdefs, however these rely on some per-CPU variables that
are available only under RCU_BOOST. These might be converted later,
if the simplification proves to outweigh the increase in memory footprint.
One hoped-for advantage is more easily locating compiler errors in
obscure combinations of Kconfig parameters.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <linux-rt-users@vger.kernel.org>
It would be good to move more code from #ifdef to IS_ENABLED(), but
that does not work if the body of the IS_ENABLED() "if" statement
references a variable (such as rcu_preempt_state) that does not
exist if the IS_ENABLED() Kconfig variable is not set. This commit
therefore substitutes *rcu_state_p for all uses of rcu_preempt_state
in kernel/rcu/tree_preempt.h, which should enable elimination of
a few #ifdefs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves from the old ACCESS_ONCE() API to the new READ_ONCE()
and WRITE_ONCE() APIs.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Updated to include kernel/torture.c as suggested by Jason Low. ]
The term "ftrace" is really the infrastructure of the function hooks,
and not the trace events. Rename ftrace_event.h to trace_events.h to
represent the trace_event infrastructure and decouple the term ftrace
from it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The evaluation of the next timer in the nohz code is based on jiffies
while all the tick internals are nano seconds based. We have also to
convert hrtimer nanoseconds to jiffies in the !highres case. That's
just wrong and introduces interesting corner cases.
Turn it around and convert the next timer wheel timer expiry and the
rcu event to clock monotonic and base all calculations on
nanoseconds. That identifies the case where no timer is pending
clearly with an absolute expiry value of KTIME_MAX.
Makes the code more readable and gets rid of the jiffies magic in the
nohz code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Link: http://lkml.kernel.org/r/20150414203502.184198593@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In a misguided attempt to avoid an #ifdef, the use of the
gp_init_delay module parameter was conditioned on the corresponding
RCU_TORTURE_TEST_SLOW_INIT Kconfig variable, using IS_ENABLED() at
the point of use in the code. This meant that the compiler always saw
the delay, which meant that RCU_TORTURE_TEST_SLOW_INIT_DELAY had to be
unconditionally defined. This in turn caused "make oldconfig" to ask
pointless questions about the value of RCU_TORTURE_TEST_SLOW_INIT_DELAY
in cases where it was not even used.
This commit avoids these pointless questions by defining gp_init_delay
under #ifdef. In one branch, gp_init_delay is initialized to
RCU_TORTURE_TEST_SLOW_INIT_DELAY and is also a module parameter (thus
allowing boot-time modification), and in the other branch gp_init_delay
is a const variable initialized by default to zero.
This approach also simplifies the code at the delay point by eliminating
the IS_DEFINED(). Because gp_init_delay is constant zero in the no-delay
case intended for production use, the "gp_init_delay > 0" check causes
the delay to become dead code, as desired in this case. In addition,
this commit replaces magic constant "10" with the preprocessor variable
PER_RCU_NODE_PERIOD, which controls the number of grace periods that
are allowed to elapse at full speed before a delay is inserted.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com>
As noted in earlier commit logs, CPU hotplug operations running
concurrently with grace-period initialization can result in a given
leaf rcu_node structure having all CPUs offline and no blocked readers,
but with this rcu_node structure nevertheless blocking the current
grace period. Therefore, the quiescent-state forcing code now checks
for this situation and repairs it.
Unfortunately, this checking can result in false positives, for example,
when the last task has just removed itself from this leaf rcu_node
structure, but has not yet started clearing the ->qsmask bits further
up the structure. This means that the grace-period kthread (which
forces quiescent states) and some other task might be attempting to
concurrently clear these ->qsmask bits. This is usually not a problem:
One of these tasks will be the first to acquire the upper-level rcu_node
structure's lock and with therefore clear the bit, and the other task,
seeing the bit already cleared, will stop trying to clear bits.
Sadly, this means that the following unusual sequence of events -can-
result in a problem:
1. The grace-period kthread wins, and clears the ->qsmask bits.
2. This is the last thing blocking the current grace period, so
that the grace-period kthread clears ->qsmask bits all the way
to the root and finds that the root ->qsmask field is now zero.
3. Another grace period is required, so that the grace period kthread
initializes it, including setting all the needed qsmask bits.
4. The leaf rcu_node structure (the one that started this whole
mess) is blocking this new grace period, either because it
has at least one online CPU or because there is at least one
task that had blocked within an RCU read-side critical section
while running on one of this leaf rcu_node structure's CPUs.
(And yes, that CPU might well have gone offline before the
grace period in step (3) above started, which can mean that
there is a task on the leaf rcu_node structure's ->blkd_tasks
list, but ->qsmask equal to zero.)
5. The other kthread didn't get around to trying to clear the upper
level ->qsmask bits until all the above had happened. This means
that it now sees bits set in the upper-level ->qsmask field, so it
proceeds to clear them. Too bad that it is doing so on behalf of
a quiescent state that does not apply to the current grace period!
This sequence of events can result in the new grace period being too
short. It can also result in the new grace period ending before the
leaf rcu_node structure's ->qsmask bits have been cleared, which will
result in splats during initialization of the next grace period. In
addition, it can result in tasks blocking the new grace period still
being queued at the start of the next grace period, which will result
in other splats. Sasha's testing turned up another of these splats,
as did rcutorture testing. (And yes, rcutorture is being adjusted to
make these splats show up more quickly. Which probably is having the
undesirable side effect of making other problems show up less quickly.
Can't have everything!)
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # 4.0.x
Tested-by: Sasha Levin <sasha.levin@oracle.com>
As noted earlier, the following sequence of events can occur when
running PREEMPT_RCU and HOTPLUG_CPU on a system with a multi-level
rcu_node combining tree:
1. A group of tasks block on CPUs corresponding to a given leaf
rcu_node structure while within RCU read-side critical sections.
2. All CPUs corrsponding to that rcu_node structure go offline.
3. The next grace period starts, but because there are still tasks
blocked, the upper-level bits corresponding to this leaf rcu_node
structure remain set.
4. All the tasks exit their RCU read-side critical sections and
remove themselves from the leaf rcu_node structure's list,
leaving it empty.
5. But because there now is code to check for this condition at
force-quiescent-state time, the upper bits are cleared and the
grace period completes.
However, there is another complication that can occur following step 4 above:
4a. The grace period starts, and the leaf rcu_node structure's
gp_tasks pointer is set to NULL because there are no tasks
blocked on this structure.
4b. One of the CPUs corresponding to the leaf rcu_node structure
comes back online.
4b. An endless stream of tasks are preempted within RCU read-side
critical sections on this CPU, such that the ->blkd_tasks
list is always non-empty.
The grace period will never end.
This commit therefore makes the force-quiescent-state processing check only
for absence of tasks blocking the current grace period rather than absence
of tasks altogether. This will cause a quiescent state to be reported if
the current leaf rcu_node structure is not blocking the current grace period
and its parent thinks that it is, regardless of how RCU managed to get
itself into this state.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> # 4.0.x
Tested-by: Sasha Levin <sasha.levin@oracle.com>
At grace-period initialization time, RCU checks that all quiescent
states were really reported for the previous grace period. Now that
grace-period cleanup has been split out of grace-period initialization,
this commit also performs those checks at grace-period cleanup time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit informs RCU of an outgoing CPU just before that CPU invokes
arch_cpu_idle_dead() during its last pass through the idle loop (via a
new CPU_DYING_IDLE notifier value). This change means that RCU need not
deal with outgoing CPUs passing through the scheduler after informing
RCU that they are no longer online. Note that removing the CPU from
the rcu_node ->qsmaskinit bit masks is done at CPU_DYING_IDLE time,
and orphaning callbacks is still done at CPU_DEAD time, the reason being
that at CPU_DEAD time we have another CPU that can adopt them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because that RCU grace-period initialization need no longer exclude
CPU-hotplug operations, this commit eliminates the ->onoff_mutex and
its uses.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Races between CPU hotplug and grace periods can be difficult to resolve,
so the ->onoff_mutex is used to exclude the two events. Unfortunately,
this means that it is impossible for an outgoing CPU to perform the
last bits of its offlining from its last pass through the idle loop,
because sleeplocks cannot be acquired in that context.
This commit avoids these problems by buffering online and offline events
in a new ->qsmaskinitnext field in the leaf rcu_node structures. When a
grace period starts, the events accumulated in this mask are applied to
the ->qsmaskinit field, and, if needed, up the rcu_node tree. The special
case of all CPUs corresponding to a given leaf rcu_node structure being
offline while there are still elements in that structure's ->blkd_tasks
list is handled using a new ->wait_blkd_tasks field. In this case,
propagating the offline bits up the tree is deferred until the beginning
of the grace period after all of the tasks have exited their RCU read-side
critical sections and removed themselves from the list, at which point
the ->wait_blkd_tasks flag is cleared. If one of that leaf rcu_node
structure's CPUs comes back online before the list empties, then the
->wait_blkd_tasks flag is simply cleared.
This of course means that RCU's notion of which CPUs are offline can be
out of date. This is OK because RCU need only wait on CPUs that were
online at the time that the grace period started. In addition, RCU's
force-quiescent-state actions will handle the case where a CPU goes
offline after the grace period starts.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_report_unblock_qs_rnp() function is invoked when the
last task blocking the current grace period exits its outermost
RCU read-side critical section. Previously, this was called only
from rcu_read_unlock_special(), and was therefore defined only when
CONFIG_RCU_PREEMPT=y. However, this function will be invoked even when
CONFIG_RCU_PREEMPT=n once CPU-hotplug operations are processed only at
the beginnings of RCU grace periods. The reason for this change is that
the last task on a given leaf rcu_node structure's ->blkd_tasks list
might well exit its RCU read-side critical section between the time that
recent CPU-hotplug operations were applied and when the new grace period
was initialized. This situation could result in RCU waiting forever on
that leaf rcu_node structure, because if all that structure's CPUs were
already offline, there would be no quiescent-state events to drive that
structure's part of the grace period.
This commit therefore moves rcu_report_unblock_qs_rnp() to common code
that is built unconditionally so that the quiescent-state-forcing code
can clean up after this situation, avoiding the grace-period stall.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, the rcu_node tree ->expmask bitmasks are initially set to
reflect the online CPUs. This is pointless, because only the CPUs
preempted within RCU read-side critical sections by the preceding
synchronize_sched_expedited() need to be tracked. This commit therefore
instead sets up these bitmasks based on the state of the ->blkd_tasks
lists.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Offline CPUs cannot safely invoke trace events, but such CPUs do execute
within rcu_cpu_notify(). Therefore, this commit removes the trace events
from rcu_cpu_notify(). These trace events are for utilization, against
which rcu_cpu_notify() execution time should be negligible.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Grace-period initialization normally proceeds quite quickly, so
that it is very difficult to reproduce races against grace-period
initialization. This commit therefore allows grace-period
initialization to be artificially slowed down, increasing
race-reproduction probability. A pair of new Kconfig parameters are
provided, CONFIG_RCU_TORTURE_TEST_SLOW_INIT to enable the slowdowns, and
CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY to specify the number of jiffies
of slowdown to apply. A boot-time parameter named rcutree.gp_init_delay
allows boot-time delay to be specified. By default, no delay will be
applied even if CONFIG_RCU_TORTURE_TEST_SLOW_INIT is set.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If all CPUs have passed through quiescent states, then stalls might be
due to starvation of the grace-period kthread or to failure to propagate
the quiescent states up the rcu_node combining tree. The current stall
warning messages do not differentiate, so this commit adds a printout
of the root rcu_node structure's ->qsmask field.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, both rcu_cleanup_dead_cpu() and rcu_send_cbs_to_orphanage()
initialize the outgoing CPU's callback list. However, only
rcu_cleanup_dead_cpu() invokes rcu_send_cbs_to_orphanage(), and
it does so unconditionally, which means that only one of these
initializations is required. This commit therefore consolidates the
callback-list initialization with the rest of the callback handling in
rcu_send_cbs_to_orphanage().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because invoke_cpu_core() checks whether the current CPU is online,
there is no need for __call_rcu_core() to redundantly check it.
There should not be any performance degradation because the called
function is visible to the compiler. This commit therefore removes
the redundant check.
Signed-off-by: Yao Dongdong <yaodongdong@huawei.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The very similar functions rcu_force_quiescent_state(),
rcu_bh_force_quiescent_state(), and rcu_sched_force_quiescent_state()
are supposed to be together, but have drifted apart. This commit
restores rcu_sched_force_quiescent_state() to its rightful place.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If an RCU read-side critical section occurs within an interrupt handler
or a softirq handler, it cannot have been preempted. Therefore, there is
a check in rcu_read_unlock_special() checking for this error. However,
when this check triggers, it lacks diagnostic information. This commit
therefore moves rcu_read_unlock()'s lockdep annotation to follow the
call to __rcu_read_unlock() and changes rcu_read_unlock_special()'s
WARN_ON_ONCE() to an lockdep_rcu_suspicious() in order to locate where
the offending RCU read-side critical section began. In addition, the
value of the ->rcu_read_unlock_special field is printed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit uses IS_ENABLED() to remove the #ifdef from the
rcu_init_levelspread() functions. No effect on executable code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because callbacks can now be posted quite early in boot, move the
early boot callback tests to precede RCU initialization.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When a CPU is first determined to be a no-CBs CPUs, this commit causes
any early boot callbacks to be moved to the no-CBs callback list,
allowing them to be invoked.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If the RCU grace-period kthread invoking rcu_sysidle_check_cpu()
happens to be running on the tick_do_timer_cpu initially,
then rcu_bind_gp_kthread() won't bind it. This kthread might
then migrate before invoking rcu_gp_fqs(), which will trigger the
WARN_ON_ONCE() in rcu_sysidle_check_cpu(). This commit therefore makes
rcu_bind_gp_kthread() do the binding even if the kthread is currently
on the same CPU. Because this incurs added overhead, this commit also
causes each RCU grace-period kthread to invoke rcu_bind_gp_kthread()
once at boot rather than at the beginning of each grace period.
And as long as rcu_bind_gp_kthread() is being modified, this commit
eliminates its #ifdef.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The standard code path accommodates a condition when no
RCU callbacks are ready to invoke. Since size of the code
is a priority for tiny RCU, remove the fast path.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When the ->curtail and ->donetail pointers differ, ->rcucblist
always points to the beginning of the current list and thus
cannot be NULL. Therefore, the check ->rcucblist != NULL is
redundant and this commit removes it.
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
On second and subsequent passes through quiescent-state forcing, the
isidle variable was initialized to false, which would prevent full sysidle
state from being reached if a grace period needed more than one round
of quiescent-state forcing (which most should not). However, the check
for offline CPUs in the quiescent-state forcing main loop had the wrong
sense, which could prevent CPUs from ever entering full sysidle state.
This commit fixes both of these bugs. Given that sysidle is not yet
wired up, this has no effect in old kernels, but might have proven
frustrating had anyone attempted to wire it up.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The "if" statement at the beginning of rcu_torture_writer() should
use the same set of variables. In theory, this does not matter because
the corresponding variables (gp_sync and gp_sync1) have the same value
at this point in the code, but in practice such puzzles should be
removed. This commit therefore makes the use of variables consistent.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a CONFIG_RCU_EXPEDITE_BOOT Kconfig parameter
that emulates a very early boot rcu_expedite_gp(). A late-boot
call to rcu_end_inkernel_boot() will provide the corresponding
rcu_unexpedite_gp(). The late-boot call to rcu_end_inkernel_boot()
should be made just before init is spawned.
According to Arjan:
> To show the boot time, I'm using the timestamp of the "Write protecting"
> line, that's pretty much the last thing we print prior to ring 3 execution.
>
> A kernel with default RCU behavior (inside KVM, only virtual devices)
> looks like this:
>
> [ 0.038724] Write protecting the kernel read-only data: 10240k
>
> a kernel with expedited RCU (using the command line option, so that I
> don't have to recompile between measurements and thus am completely
> oranges-to-oranges)
>
> [ 0.031768] Write protecting the kernel read-only data: 10240k
>
> which, in percentage, is an 18% improvement.
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Arjan van de Ven <arjan@linux.intel.com>
This commit updates open-coded tests of the rcu_expedited variable
to instead use rcu_gp_is_expedited().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, expediting of normal synchronous grace-period primitives
(synchronize_rcu() and friends) is controlled by the rcu_expedited()
boot/sysfs parameter. This works well, but does not handle nesting.
This commit therefore provides rcu_expedite_gp() to enable expediting
and rcu_unexpedite_gp() to cancel a prior rcu_expedite_gp(), both of
which support nesting.
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When a CPU comes online, it initializes its callback list. This
is a bad thing if this is the first time that the CPU has come
online and if that CPU has early boot callbacks. This commit therefore
avoid initializing the callback list if there are callbacks present,
in which case the initial call_rcu() did the initialization for us.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Some diagnostics under CONFIG_PROVE_RCU in rcu_nocb_cpu_needs_barrier()
assume that there can be no early-boot callbacks. This commit therefore
qualifies the diagnostic with rcu_scheduler_fully_active to permit
early boot callbacks to avoid this splat.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, a call_rcu() that precedes rcu_init() will splat due to the
callback lists not having yet been initialized. This commit causes the
first such callback to initialize the boot CPU's RCU callback list.
Note that this commit does not change rcu_init()-time initialization,
which means that the callback will be discarded at rcu_init() time.
Fixing this is the job of later commits.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit wires up the rcu_state structures' ->rda pointers to the
per-CPU rcu_data structures at compile time, thus ensuring that this
linkage is present at early boot, in turn allowing posting of callbacks
before rcu_init() is executed.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In preparation for early-boot posting of callbacks, this commit abstracts
initialization of the default (non-no-CB) callbacks list from the
init_callback_list() function into a new init_default_callback_list()
function.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In rcu_gp_init(), rnp->completed equals to rsp->completed in THEORY,
we don't need to touch it normally. If something goes wrong,
it will complain and fixup rnp->completed and avoid oops.
This commit thus avoids the normal needless store to rnp->completed.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
There are currently duplicate identical definitions of the
rcu_synchronize() structure and the wakeme_after_rcu() function.
Thie commit therefore consolidates them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Pull rcu fix and x86 irq fix from Ingo Molnar:
- Fix a bug that caused an RCU warning splat.
- Two x86 irq related fixes: a hotplug crash fix and an ACPI IRQ
registry fix.
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcu: Clear need_qs flag to prevent splat
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Check for valid irq descriptor in check_irq_vectors_for_cpu_disable()
x86/irq: Fix regression caused by commit b568b8601f
printk and friends can now format bitmaps using '%*pb[l]'. cpumask
and nodemask also provide cpumask_pr_args() and nodemask_pr_args()
respectively which can be used to generate the two printf arguments
necessary to format the specified cpu/nodemask.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If the scheduling-clock interrupt sets the current tasks need_qs flag,
but if the current CPU passes through a quiescent state in the meantime,
then rcu_preempt_qs() will fail to clear the need_qs flag, which can fool
RCU into thinking that additional rcu_read_unlock_special() processing
is needed. This commit therefore clears the need_qs flag before checking
for additional processing.
For this problem to occur, we need rcu_preempt_data.passed_quiesce equal
to true and current->rcu_read_unlock_special.b.need_qs also equal to true.
This condition can occur as follows:
1. CPU 0 is aware of the current preemptible RCU grace period,
but has not yet passed through a quiescent state. Among other
things, this means that rcu_preempt_data.passed_quiesce is false.
2. Task A running on CPU 0 enters a preemptible RCU read-side
critical section.
3. CPU 0 takes a scheduling-clock interrupt, which notices the
RCU read-side critical section and the need for a quiescent state,
and thus sets current->rcu_read_unlock_special.b.need_qs to true.
4. Task A is preempted, enters the scheduler, eventually invoking
rcu_preempt_note_context_switch() which in turn invokes
rcu_preempt_qs().
Because rcu_preempt_data.passed_quiesce is false,
control enters the body of the "if" statement, which sets
rcu_preempt_data.passed_quiesce to true.
5. At this point, CPU 0 takes an interrupt. The interrupt
handler contains an RCU read-side critical section, and
the rcu_read_unlock() notes that current->rcu_read_unlock_special
is nonzero, and thus invokes rcu_read_unlock_special().
6. Once in rcu_read_unlock_special(), the fact that
current->rcu_read_unlock_special.b.need_qs is true becomes
apparent, so rcu_read_unlock_special() invokes rcu_preempt_qs().
Recursively, given that we interrupted out of that same
function in the preceding step.
7. Because rcu_preempt_data.passed_quiesce is now true,
rcu_preempt_qs() does nothing, and simply returns.
8. Upon return to rcu_read_unlock_special(), it is noted that
current->rcu_read_unlock_special is still nonzero (because
the interrupted rcu_preempt_qs() had not yet gotten around
to clearing current->rcu_read_unlock_special.b.need_qs).
9. Execution proceeds to the WARN_ON_ONCE(), which notes that
we are in an interrupt handler and thus duly splats.
The solution, as noted above, is to make rcu_read_unlock_special()
clear out current->rcu_read_unlock_special.b.need_qs after calling
rcu_preempt_qs(). The interrupted rcu_preempt_qs() will clear it again,
but this is harmless. The worst that happens is that we clobber another
attempt to set this field, but this is not a problem because we just
got done reporting a quiescent state.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fix embarrassing build bug noted by Sasha Levin. ]
Tested-by: Sasha Levin <sasha.levin@oracle.com>
The current tiny RCU stall-warning code assumes that the jiffies counter
starts at zero, however, it is sometimes initialized to other values,
for example, -30,000. This commit therefore changes rcu_init() to
invoke reset_cpu_stall_ticks() for both flavors of RCU to initialize
the stall-warning times properly at boot.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The tiny RCU CPU stall detection depends on *rcp->curtail not being
NULL. It is however a tail pointer and thus NULL by definition. Instead we
should check rcp->rcucblist for the presence of pending callbacks which
need to be processed. With this fix INFO about the stall is printed and
jiffies_stall (jiffies at next stall) correctly updated.
Note that the check for pending callback is necessary to avoid spurious
warnings if there are no pendings callbacks.
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
[ paulmck: Fused identical "if" statements, ported to -rcu. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds a message that is printed if the relevant grace-period
kthread has not been able to run for the two seconds preceding the
stall warning. (The two seconds is double the maximum interval between
successive bouts of quiescent-state forcing.)
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Although cond_resched_rcu_qs() only applies to TASKS_RCU, it is used
in places where it would be useful for it to apply to the normal RCU
flavors, rcu_preempt, rcu_sched, and rcu_bh. This is especially the
case for workloads that aggressively overload the system, particularly
those that generate large numbers of RCU updates on systems running
NO_HZ_FULL CPUs. This commit therefore communicates quiescent states
from cond_resched_rcu_qs() to the normal RCU flavors.
Note that it is unfortunately necessary to leave the old ->passed_quiesce
mechanism in place to allow quiescent states that apply to only one
flavor to be recorded. (Yes, we could decrement ->rcu_qs_ctr_snap in
that case, but that is not so good for debugging of RCU internals.)
In addition, if one of the RCU flavor's grace period has stalled, this
will invoke rcu_momentary_dyntick_idle(), resulting in a heavy-weight
quiescent state visible from other CPUs.
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Merge commit from Sasha Levin fixing a bug where __this_cpu()
was used in preemptible code. ]
Recent testing has shown that under heavy load, running RCU's grace-period
kthreads at real-time priority can improve performance (according to 0day
test robot) and reduce the incidence of RCU CPU stall warnings. However,
most systems do just fine with the default non-realtime priorities for
these kthreads, and it does not make sense to expose the entire user
base to any risk stemming from this change, given that this change is
of use only to a few users running extremely heavy workloads.
Therefore, this commit allows users to specify realtime priorities
for the grace-period kthreads, but leaves them running SCHED_OTHER
by default. The realtime priority may be specified at build time
via the RCU_KTHREAD_PRIO Kconfig parameter, or at boot time via the
rcutree.kthread_prio parameter. Either way, 0 says to continue the
default SCHED_OTHER behavior and values from 1-99 specify that priority
of SCHED_FIFO behavior. Note that a value of 0 is not permitted when
the RCU_BOOST Kconfig parameter is specified.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Currently, rcutorture's Reader Batch checks measure from the end of
the previous grace period to the end of the current one. This commit
tightens up these checks by measuring from the start and end of the same
grace period. This involves adding rcu_batches_started() and friends
corresponding to the existing rcu_batches_completed() and friends.
We leave SRCU alone for the moment, as it does not yet have a way of
tracking both ends of its grace periods.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that the return type of rcu_batches_completed() and friends matches
that of the rcu_torture_ops structure's ->completed field, the wrapper
functions can be deleted. This commit carries out that deletion, while
also wiring "sched"'s ->completed field to rcu_batches_completed_sched().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The counter returned by the various ->completed functions is subject to
overflow, which means that subtracting two such counters might result
in overflow, which invokes undefined behavior in the C standard. This
commit therefore changes these functions and variables to unsigned to
avoid this undefined behavior.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Long ago, the various ->completed fields were of type long, but now are
unsigned long due to signed-integer-overflow concerns. However, the
various _batches_completed() functions remained of type long, even though
their only purpose in life is to return the corresponding ->completed
field. This patch cleans this up by changing these functions' return
types to unsigned long.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Subtle race conditions can result if a CPU stays in dyntick-idle mode
long enough for the ->gpnum and ->completed fields to wrap. For
example, consider the following sequence of events:
o CPU 1 encounters a quiescent state while waiting for grace period
5 to complete, but then enters dyntick-idle mode.
o While CPU 1 is in dyntick-idle mode, the grace-period counters
wrap around so that the grace period number is now 4.
o Just as CPU 1 exits dyntick-idle mode, grace period 4 completes
and grace period 5 begins.
o The quiescent state that CPU 1 passed through during the old
grace period 5 looks like it applies to the new grace period
5. Therefore, the new grace period 5 completes without CPU 1
having passed through a quiescent state.
This could clearly be a fatal surprise to any long-running RCU read-side
critical section that happened to be running on CPU 1 at the time. At one
time, this was not a problem, given that it takes significant time for
the grace-period counters to overflow even on 32-bit systems. However,
with the advent of NO_HZ_FULL and SMP embedded systems, arbitrarily long
idle periods are now becoming quite feasible. It is therefore time to
close this race.
This commit therefore avoids this race condition by having the
quiescent-state forcing code detect when a CPU is falling too far
behind, and setting a new rcu_data field ->gpwrap when this happens.
Whenever this new ->gpwrap field is set, the CPU's ->gpnum and ->completed
fields are known to be untrustworthy, and can be ignored, along with
any associated quiescent states.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The current RCU CPU stall warning code will print "Stall ended before
state dump start" any time that the stall-warning code is triggered on
a CPU that has already reported a quiescent state for the current grace
period and if all quiescent states have been reported for the current
grace period. However, a true stall can result in these symptoms, for
example, by preventing RCU's grace-period kthreads from ever running
This commit therefore checks for this condition, reporting the end of
the stall only if one of the grace-period counters has actually advanced.
Otherwise, it reports the last time that the grace-period kthread made
meaningful progress. (In normal situations, the grace-period kthread
should make meaningful progress at least every jiffies_till_next_fqs
jiffies.)
Reported-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Miroslav Benes <mbenes@suse.cz>
One way that an RCU CPU stall warning can happen is if the grace-period
kthread is not allowed to execute. One proxy for this kthread's
forward progress is the number of force-quiescent-state (fqs) scans.
This commit therefore adds the number of fqs scans to the RCU CPU stall
warning printouts when CONFIG_RCU_CPU_STALL_INFO=y.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
SRCU is not necessary to be compiled by default in all cases. For tinification
efforts not compiling SRCU unless necessary is desirable.
The current patch tries to make compiling SRCU optional by introducing a new
Kconfig option CONFIG_SRCU which is selected when any of the components making
use of SRCU are selected.
If we do not select CONFIG_SRCU, srcu.o will not be compiled at all.
text data bss dec hex filename
2007 0 0 2007 7d7 kernel/rcu/srcu.o
Size of arch/powerpc/boot/zImage changes from
text data bss dec hex filename
831552 64180 23944 919676 e087c arch/powerpc/boot/zImage : before
829504 64180 23952 917636 e0084 arch/powerpc/boot/zImage : after
so the savings are about ~2000 bytes.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]
When rcutorture used only the low-order 32 bits of the grace-period
number, it was not a problem for SRCU to use a 32-bit completed field.
However, rcutorture now uses the full 64 bits on 64-bit systems, so
this commit converts SRCU's ->completed field to unsigned long so as to
provide 64 bits on 64-bit systems.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The RCU callback lists are initialized in both rcu_boot_init_percpu_data()
and rcu_init_percpu_data(). The former is intended for initializing
immutable data, so this commit removes the initialization from
rcu_boot_init_percpu_data() and leaves it in rcu_init_percpu_data().
This change prepares for permitting callbacks to be queued very early
in boot.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that blocked tasks are no longer migrated to the root rcu_node
structure, there is no need to scan the root rcu_node structure for
blocked tasks stalling the current grace period. This commit therefore
removes this scan.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The patch dfeb9765ce ("Allow post-unlock reference for rt_mutex")
ensured rcu-boost safe even the rt_mutex has post-unlock reference.
But rt_mutex allowing post-unlock reference is definitely a bug and it was
fixed by the commit 27e35715df ("rtmutex: Plug slow unlock race").
This fix made the previous patch (dfeb9765ce) useless.
And even worse, the priority-inversion introduced by the the previous
patch still exists.
rcu_read_unlock_special() {
rt_mutex_unlock(&rnp->boost_mtx);
/* Priority-Inversion:
* the current task had been deboosted and preempted as a low
* priority task immediately, it could wait long before reschedule in,
* and the rcu-booster also waits on this low priority task and sleeps.
* This priority-inversion makes rcu-booster can't work
* as expected.
*/
complete(&rnp->boost_completion);
}
Just revert the patch to avoid it.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_cleanup_dead_cpu() function (called after a CPU has gone
completely offline) has not reported a quiescent state because there
was probably at least one synchronize_rcu() between the time the CPU
went offline and the CPU_DEAD notifier, and this would have detected
the CPU's offline state via quiescent-state forcing. However, the plan
is for CPUs to take themselves offline, at which point it makes sense
for them to report their own quiescent state. This commit makes this
change in preparation for the new CPU-hotplug setup.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When rcu_boost_kthread_setaffinity() sees that all CPUs for a given
rcu_node structure are now offline, it affinities the corresponding
RCU-boost ("rcub") kthread away from those CPUs. This is pointless
because the kthread cannot run on those offline CPUs in any case.
This commit therefore removes this unneeded code.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Because there is no longer any preempted tasks on the root rcu_node, and
because there is no longer ever an rcub kthread for the root rcu_node,
this commit drops the code in force_qs_rnp() that attempts to awaken
the non-existent root rcub kthread. This is strictly a performance
enhancement, removing a root rcu_node ->lock acquisition and release
along with some tests in rcu_initiate_boost(), ending with the test that
notes that there is no rcub kthread.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that offlining CPUs no longer moves leaf rcu_node structures'
->blkd_tasks lists to the root, there is no way for the root rcu_node
structure's ->blkd_task list to be nonempty, unless the root node is also
the sole leaf node. This commit therefore refrains from creating an rcub
kthread for the root rcu_node structure unless it is also the sole leaf.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Given that there is now arcu_preempt_has_tasks() function that checks
to see if the ->blkd_tasks list is non-empty, this commit makes use of it.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Now that we are not migrating callbacks, there is no need to hold the
->orphan_lock across the the ->qsmaskinit bit-clearing process.
This commit therefore releases ->orphan_lock immediately after adopting
the orphaned RCU callbacks.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
When the last CPU associated with a given leaf rcu_node structure
goes offline, something must be done about the tasks queued on that
rcu_node structure. Each of these tasks has been preempted on one of
the leaf rcu_node structure's CPUs while in an RCU read-side critical
section that it have not yet exited. Handling these tasks is the job of
rcu_preempt_offline_tasks(), which migrates them from the leaf rcu_node
structure to the root rcu_node structure.
Unfortunately, this migration has to be done one task at a time because
each tasks allegiance must be shifted from the original leaf rcu_node to
the root, so that future attempts to deal with these tasks will acquire
the root rcu_node structure's ->lock rather than that of the leaf.
Worse yet, this migration must be done with interrupts disabled, which
is not so good for realtime response, especially given that there is
no bound on the number of tasks on a given rcu_node structure's list.
(OK, OK, there is a bound, it is just that it is unreasonably large,
especially on 64-bit systems.) This was not considered a problem back
when rcu_preempt_offline_tasks() was first written because realtime
systems were assumed not to do CPU-hotplug operations while real-time
applications were running. This assumption has proved of dubious validity
given that people are starting to run multiple realtime applications
on a single SMP system and that it is common practice to offline then
online a CPU before starting its real-time application in order to clear
extraneous processing off of that CPU. So we now need CPU hotplug
operations to avoid undue latencies.
This commit therefore avoids migrating these tasks, instead letting
them be dequeued one by one from the original leaf rcu_node structure
by rcu_read_unlock_special(). This means that the clearing of bits
from the upper-level rcu_node structures must be deferred until the
last such task has been dequeued, because otherwise subsequent grace
periods won't wait on them. This commit has the beneficial side effect
of simplifying the CPU-hotplug code for TREE_PREEMPT_RCU, especially in
CONFIG_RCU_BOOST builds.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit causes rcu_read_unlock_special() to propagate ->qsmaskinit
bit clearing up the rcu_node tree once a given rcu_node structure's
blkd_tasks list becomes empty. This is the final commit in preparation
for the rework of RCU priority boosting: It enables preempted tasks to
remain queued on their rcu_node structure even after all of that rcu_node
structure's CPUs have gone offline.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit abstracts rcu_cleanup_dead_rnp() from rcu_cleanup_dead_cpu()
in preparation for the rework of RCU priority boosting. This new function
will be invoked from rcu_read_unlock_special() in the reworked scheme,
which is why rcu_cleanup_dead_rnp() assumes that the leaf rcu_node
structure's ->qsmaskinit field has already been updated.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit undertakes a simple variable renaming to make way for
some rework of RCU priority boosting.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit prevents random compiler optimizations by applying
ACCESS_ONCE() to lockless accesses.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The 48a7639ce8 ("rcu: Make callers awaken grace-period kthread")
removed the irq_work_queue(), so the TREE_RCU doesn't need
irq work any more. This commit therefore updates RCU's Kconfig and
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The rcu_barrier() no-callbacks check for no-CBs CPUs has race conditions.
It checks a given CPU's lists of callbacks, and if all three no-CBs lists
are empty, ignores that CPU. However, these three lists could potentially
be empty even when callbacks are present if the check executed just as
the callbacks were being moved from one list to another. It turns out
that recent versions of rcutorture can spot this race.
This commit plugs this hole by consolidating the per-list counts of
no-CBs callbacks into a single count, which is incremented before
the corresponding callback is posted and after it is invoked. Then
rcu_barrier() checks this single count to reliably determine whether
the corresponding CPU has no-CBs callbacks.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
For RCU in UP, context-switch = QS = GP, thus we can force a
context-switch when any call_rcu_[bh|sched]() is happened on idle_task.
After doing so, rcu_idle/irq_enter/exit() are useless, so we can simply
make these functions empty.
More important, this change does not change the functionality logically.
Note: raise_softirq(RCU_SOFTIRQ)/rcu_sched_qs() in rcu_idle_enter() and
outmost rcu_irq_exit() will have to wake up the ksoftirqd
(due to in_interrupt() == 0).
Before this patch After this patch:
call_rcu_sched() in idle; call_rcu_sched() in idle
set resched
do other stuffs; do other stuffs
outmost rcu_irq_exit() outmost rcu_irq_exit() (empty function)
(or rcu_idle_enter()) (or rcu_idle_enter(), also empty function)
start to resched. (see above)
rcu_sched_qs() rcu_sched_qs()
QS,and GP and advance cb QS,and GP and advance cb
wake up the ksoftirqd wake up the ksoftirqd
set resched
resched to ksoftirqd (or other) resched to ksoftirqd (or other)
These two code patches are almost the same.
Size changed after patched:
size kernel/rcu/tiny-old.o kernel/rcu/tiny-patched.o
text data bss dec hex filename
3449 206 8 3663 e4f kernel/rcu/tiny-old.o
2406 144 8 2558 9fe kernel/rcu/tiny-patched.o
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Despite what the comment says, it is only softirqs that are disabled,
not interrupts. This commit therefore fixes the comment.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Let's start assuming that something in the idle loop posts a callback,
and scheduling-clock interrupt occurs:
1. The system is idle and stays that way, no runnable tasks.
2. Scheduling-clock interrupt occurs, rcu_check_callbacks() is called
as result, which in turn calls rcu_is_cpu_rrupt_from_idle().
3. rcu_is_cpu_rrupt_from_idle() reports the CPU was interrupted from
idle, which results in rcu_sched_qs() call, which does a
raise_softirq(RCU_SOFTIRQ).
4. Upon return from interrupt, rcu_irq_exit() is invoked, which calls
rcu_idle_enter_common(), which in turn calls rcu_sched_qs() again,
which does another raise_softirq(RCU_SOFTIRQ).
5. The softirq happens shortly and invokes rcu_process_callbacks(),
which invokes __rcu_process_callbacks().
6. So now callbacks can be invoked. At least they can be if
->donetail has been updated. Which it will have been because
rcu_sched_qs() invokes rcu_qsctr_help().
In the described scenario rcu_sched_qs() and raise_softirq(RCU_SOFTIRQ)
get called twice in steps 3 and 4. This redundancy could be eliminated
by removing rcu_is_cpu_rrupt_from_idle() function.
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The x86 architecture has multiple types of NMI-like interrupts: real
NMIs, machine checks, and, for some values of NMI-like, debugging
and breakpoint interrupts. These interrupts can nest inside each
other. Andy Lutomirski is adding RCU support to these interrupts,
so rcu_nmi_enter() and rcu_nmi_exit() must now correctly handle nesting.
This commit therefore introduces nesting, using a clever NMI-coordination
algorithm suggested by Andy. The trick is to atomically increment
->dynticks (if needed) before manipulating ->dynticks_nmi_nesting on entry
(and, accordingly, after on exit). In addition, ->dynticks_nmi_nesting
is incremented by one if ->dynticks was incremented and by two otherwise.
This means that when rcu_nmi_exit() sees ->dynticks_nmi_nesting equal
to one, it knows that ->dynticks must be atomically incremented.
This NMI-coordination algorithms has been validated by the following
Promela model:
------------------------------------------------------------------------
/*
* Promela model for Andy Lutomirski's suggested change to rcu_nmi_enter()
* that allows nesting.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, you can access it online at
* http://www.gnu.org/licenses/gpl-2.0.html.
*
* Copyright IBM Corporation, 2014
*
* Author: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
*/
byte dynticks_nmi_nesting = 0;
byte dynticks = 0;
/*
* Promela verision of rcu_nmi_enter().
*/
inline rcu_nmi_enter()
{
byte incby;
byte tmp;
incby = BUSY_INCBY;
assert(dynticks_nmi_nesting >= 0);
if
:: (dynticks & 1) == 0 ->
atomic {
dynticks = dynticks + 1;
}
assert((dynticks & 1) == 1);
incby = 1;
:: else ->
skip;
fi;
tmp = dynticks_nmi_nesting;
tmp = tmp + incby;
dynticks_nmi_nesting = tmp;
assert(dynticks_nmi_nesting >= 1);
}
/*
* Promela verision of rcu_nmi_exit().
*/
inline rcu_nmi_exit()
{
byte tmp;
assert(dynticks_nmi_nesting > 0);
assert((dynticks & 1) != 0);
if
:: dynticks_nmi_nesting != 1 ->
tmp = dynticks_nmi_nesting;
tmp = tmp - BUSY_INCBY;
dynticks_nmi_nesting = tmp;
:: else ->
dynticks_nmi_nesting = 0;
atomic {
dynticks = dynticks + 1;
}
assert((dynticks & 1) == 0);
fi;
}
/*
* Base-level NMI runs non-atomically. Crudely emulates process-level
* dynticks-idle entry/exit.
*/
proctype base_NMI()
{
byte busy;
busy = 0;
do
:: /* Emulate base-level dynticks and not. */
if
:: 1 -> atomic {
dynticks = dynticks + 1;
}
busy = 1;
:: 1 -> skip;
fi;
/* Verify that we only sometimes have base-level dynticks. */
if
:: busy == 0 -> skip;
:: busy == 1 -> skip;
fi;
/* Model RCU's NMI entry and exit actions. */
rcu_nmi_enter();
assert((dynticks & 1) == 1);
rcu_nmi_exit();
/* Emulated re-entering base-level dynticks and not. */
if
:: !busy -> skip;
:: busy ->
atomic {
dynticks = dynticks + 1;
}
busy = 0;
fi;
/* We had better now be in dyntick-idle mode. */
assert((dynticks & 1) == 0);
od;
}
/*
* Nested NMI runs atomically to emulate interrupting base_level().
*/
proctype nested_NMI()
{
do
:: /*
* Use an atomic section to model a nested NMI. This is
* guaranteed to interleave into base_NMI() between a pair
* of base_NMI() statements, just as a nested NMI would.
*/
atomic {
/* Verify that we only sometimes are in dynticks. */
if
:: (dynticks & 1) == 0 -> skip;
:: (dynticks & 1) == 1 -> skip;
fi;
/* Model RCU's NMI entry and exit actions. */
rcu_nmi_enter();
assert((dynticks & 1) == 1);
rcu_nmi_exit();
}
od;
}
init {
run base_NMI();
run nested_NMI();
}
------------------------------------------------------------------------
The following script can be used to run this model if placed in
rcu_nmi.spin:
------------------------------------------------------------------------
if ! spin -a rcu_nmi.spin
then
echo Spin errors!!!
exit 1
fi
if ! cc -DSAFETY -o pan pan.c
then
echo Compilation errors!!!
exit 1
fi
./pan -m100000
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Lai Jiangshan <laijs@cn.fujitsu.com>
This commit affines rcu_tasks_kthread() to the housekeeping CPUs
in CONFIG_NO_HZ_FULL builds. This is just a default, so systems
administrators are free to put this kthread somewhere else if they wish.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Commit 38706bc5a2 (rcutorture: Add callback-flood test) vmalloc()ed
a bunch of RCU callbacks, but failed to free them. This commit fixes
that oversight.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Add early boot self tests for RCU under CONFIG_PROVE_RCU.
Currently the only test is adding a dummy callback which increments a counter
which we then later verify after calling rcu_barrier*().
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
The "cpu" argument to rcu_cleanup_after_idle() is always the current
CPU, so drop it. This moves the smp_processor_id() from the caller to
rcu_cleanup_after_idle(), saving argument-passing overhead. Again,
the anticipated cross-CPU uses of these functions has been replaced
by NO_HZ_FULL.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The "cpu" argument to rcu_prepare_for_idle() is always the current
CPU, so drop it. This in turn allows two of the uses of "cpu" in
this function to be replaced with a this_cpu_ptr() and the third by
smp_processor_id(), replacing that of the call to rcu_prepare_for_idle().
Again, the anticipated cross-CPU uses of these functions has been replaced
by NO_HZ_FULL.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The "cpu" argument to rcu_needs_cpu() is always the current CPU, so drop
it. This in turn allows the "cpu" argument to rcu_cpu_has_callbacks()
to be removed, which allows the uses of "cpu" in both functions to be
replaced with a this_cpu_ptr(). Again, the anticipated cross-CPU uses
of these functions has been replaced by NO_HZ_FULL.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The "cpu" argument to rcu_note_context_switch() is always the current
CPU, so drop it. This in turn allows the "cpu" argument to
rcu_preempt_note_context_switch() to be removed, which allows the sole
use of "cpu" in both functions to be replaced with a this_cpu_ptr().
Again, the anticipated cross-CPU uses of these functions has been
replaced by NO_HZ_FULL.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Because rcu_preempt_check_callbacks()'s argument is guaranteed to
always be the current CPU, drop the argument and replace per_cpu()
with __this_cpu_read().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Because rcu_pending()'s argument is guaranteed to always be the current
CPU, drop the argument and replace per_cpu_ptr() with this_cpu_ptr().
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The "cpu" argument was kept around on the off-chance that RCU might
offload scheduler-clock interrupts. However, this offload approach
has been replaced by NO_HZ_FULL, which offloads -all- RCU processing
from qualifying CPUs. It is therefore time to remove the "cpu" argument
to rcu_check_callbacks(), which this commit does.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
The rcu_data per-CPU variable has a number of fields that are atomically
manipulated, potentially by any CPU. This situation can result in false
sharing with per-CPU variables that have the misfortune of being allocated
adjacent to rcu_data in memory. This commit therefore changes the
DEFINE_PER_CPU() to DEFINE_PER_CPU_SHARED_ALIGNED() in order to avoid
this false sharing.
Reported-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
For some functions in kernel/rcu/tree* the rdtp parameter is always
this_cpu_ptr(rdtp). Remove the parameter if constant and calculate the
pointer in function.
This will have the advantage that it is obvious that the address are
all per cpu offsets and thus it will enable the use of this_cpu_ops in
the future.
Signed-off-by: Christoph Lameter <cl@linux.com>
[ paulmck: Forward-ported to rcu/dev, whitespace adjustment. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
Commit 35ce7f29a4 (rcu: Create rcuo kthreads only for onlined CPUs)
contains checks for the case where CPUs are brought online out of
order, re-wiring the rcuo leader-follower relationships as needed.
Unfortunately, this rewiring was broken. This apparently went undetected
due to the tendency of systems to bring CPUs online in order. This commit
nevertheless fixes the rewiring.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If a no-CBs CPU were to post an RCU callback with interrupts disabled
after it entered the idle loop for the last time, there might be no
deferred wakeup for the corresponding rcuo kthreads. This commit
therefore adds a set of calls to do_nocb_deferred_wakeup() after the
CPU has gone completely offline.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Paul E. McKenney
Alexander Gordeev
Nicholas Mc Guire
Denys Vlasenko
Linus Torvalds
Thomas Gleixner
Nicolas Iooss
Patrick Daly
Joe Perches
Steven Rostedt (Red Hat)
Yao Dongdong
Lai Jiangshan
Tejun Heo
Miroslav Benes
Pranith Kumar
Christoph Lameter