WMI event 0xe00e is received when battery was removed or inserted.
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
To be consistent with other namespaces, expose a 'size' attribute for
BTT devices also.
Cc: Dan Williams <dan.j.williams@intel.com>
Reported-by: Linda Knippers <linda.knippers@hpe.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The "NVDIMM Block Window Driver Writer's Guide":
http://pmem.io/documents/NVDIMM_DriverWritersGuide-July-2016.pdf
...defines the layout of the block window status register. For the July
2016 version of the spec linked to above, this happens in Figure 4 on
page 26.
The only bits defined in this spec are bits 31, 5, 4, 2, 1 and 0. The
rest of the bits in the status register are reserved, and there is a
warning following the diagram that says:
Note: The driver cannot assume the value of the RESERVED bits in the
status register are zero. These reserved bits need to be masked off, and
the driver must avoid checking the state of those bits.
This change ensures that for hardware implementations that set these
reserved bits in the status register, the driver won't incorrectly fail the
block I/Os.
Cc: <stable@vger.kernel.org> #v4.2+
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Using atomic_mode_set instead of mode_set allows to access crtc
and connector states in addition to the modes. This allows to
remove the connector list walk.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Some encoders need more information from crtc and connector state or
connector display info than just the mode during mode setting. This
patch adds an atomic encoder mode setting variant that passes the crtc
state (which contains the modes) and the connector state.
atomic_enable/disable variants that additionally pass crtc and connector
state don't seem to be necessary for any current driver. mode_fixup
already has an atomic equivalent in atomic_check.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
imx_drm_handle_vblank() is just a simple wrapper of drm_crtc_handle_vblank()
without doing any thing fancy - drm_crtc_handle_vblank() can be called
directly. So, let's remove the wrapper.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch adds the remaining missing IDMAC channel names: VDIC channels
for combining, the separate alpha channels for the MEM->IC and MEM->DC
ASYNC channels, and the DC read, command, and output mask channels.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Rename the CSI client device in the client_reg[] table to
"imx-ipuv3-csi".
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There can be multiple IC tasks using the IRT, so the IRT needs
a separate use counter. Create a private ipu_irt_enable() to
enable the IRT module when any IC task requires rotation, and
ipu_irt_disable() when a task no longer needs the IRT.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The CSI data format was being programmed incorrectly for the
1x16 media bus formats. The CSI data format for 16-bit must
be bayer/generic (CSI_SENS_CONF_DATA_FMT_BAYER).
Suggested-by: Carsten Resch <Carsten.Resch@de.bosch.com>
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Set the sensor full frame based on whether the passed in mbus_fmt
is 720x480 (NTSC) or 720x576 (PAL).
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds the VDIC field input IDMAC channels. These channels
transfer fields F(n-1), F(n), and F(N+1) from memory to
the VDIC (channels 8, 9, 10 respectively).
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds of-alias id to ipu_soc and retrieve with ipu_get_num().
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Adds ipu_cpmem_set_uv_offset(), to set planar U/V offsets.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There is no one calling imx_drm_crtc_id() and it is just a simple
wrapper of drm_crtc_index() without doing any thing fancy - the
drivers may call drm_crtc_index() directly. So, let's remove the
wrapper.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There is no one calling imx_drm_crtc_vblank_get/_put() and
they are just two simple wrappers of drm_crtc_vblank_get/_put()
without doing any thing fancy - the drivers may call
drm_crtc_vblank_get/_put() directly. So, let's remove the two
wrappers.
Signed-off-by: Liu Ying <gnuiyl@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The 'de-active' and 'pixelclk-active' DT properties are evaluated
by of_parse_display_timing() called from of_get_drm_display_mode(),
but later lost in the conversion from videomode.flags to
drm_display_mode.flags.
Enhance of_get_drm_display_mode() to also return the bus flags in a
separate variable, so that they can be passed on to the ipu-di
driver.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
add a helper function to extract information about pixel clock and DE
polarity from DT for use by of_get_drm_display_mode().
While at it, convert spaces to tabs in indentation in drm_modes.h.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
When reconfiguring a plane position (as in moving the cursor), the
frame buffer for the cursor isn't changing, so don't call the prepare
or cleanup driver functions.
This avoids making cursor position updates block on all pending rendering.
v3: use drm_atomic_helper_framebuffer_changed in both prepare and
cleanup phases instead of keeping state in the plane.
cc: dri-devel@lists.freedesktop.org
cc: David Airlie <airlied@linux.ie>
cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Keith Packard <keithp@keithp.com>
[danvet: Rebase onto 4.8]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Except for nouveau, only legacy drivers need this really. And nouveau
is already marked up with DRIVER_KMS_LEGACY_CONTEXT as the special
case.
I've tried to be careful to leave everything related to modeset still
using the DRIVER_MODESET flag. Otherwise it's a direct replacement of
!DRIVER_MODESET with DRIVER_LEGACY checks. Also helps readability
since fewer negative checks overall.
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470251470-30830-2-git-send-email-daniel.vetter@ffwll.ch
It's super confusing that new drivers need to be marked with
DRIVER_MODESET when really it means DRIVER_MODERN. Much better to
invert the meaning and rename it to something that's suitably
off-putting.
Since there's over 100 places using DRIVER_MODESET we need to roll out
this change without a flag day.
v2: Update docs.
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470251470-30830-1-git-send-email-daniel.vetter@ffwll.ch
At a higher level, all objects are created with definite size i.e. 0 is
illegal. In forthcoming patches, this assumption is dependent upon in
the drm_mm range manager, i.e. trying to create a drm_mm node with size
0 will have undefined behaviour. Add a couple of WARNs upon creating the
drm_mm node to prevent later bugs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470248788-30873-1-git-send-email-chris@chris-wilson.co.uk
The minor referred to by "DRM_MINOR_LEGACY" is called 'dev->primary' and
gets 'cardX' as name assigned. Lets reduce this magnificent number of
names for the same concept by one and rename DRM_MINOR_LEGACY to
DRM_MINOR_PRIMARY (to match the actual struct-member name).
Furthermore, this is in no way a legacy node, so lets not call it that.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160803180432.1341-2-dh.herrmann@gmail.com
In addition to the last-in/first-out stack for accessing drm_mm nodes,
we occasionally and in the future often want to find a drm_mm_node by an
address. To do so efficiently we need to track the nodes in an interval
tree - lookups for a particular address will then be O(lg(N)), where N
is the number of nodes in the range manager as opposed to O(N).
Insertion however gains an extra O(lg(N)) step for all nodes
irrespective of whether the interval tree is in use. For future i915
patches, eliminating the linear walk is a significant improvement.
v2: Use generic interval-tree template for u64 and faster insertion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470236651-678-1-git-send-email-chris@chris-wilson.co.uk
It was really strange to see negative vblank seqs on debug
messages. It is rare to have that big number, but when it
happens it is confusing and misleading.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470243226-2750-1-git-send-email-rodrigo.vivi@intel.com
A few fixes for amdgpu and ttm for 4.8
- fix a ttm regression caused by the new pipelining code
- fixes for mullins on amdgpu
- updated golden settings for amdgpu
* 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux:
drm/ttm: Wait for a BO to become idle before unbinding it from GTT
drm/amdgpu: update golden setting of polaris10
drm/amdgpu: update golden setting of stoney
drm/amdgpu: update golden setting of polaris11
drm/amdgpu: update golden setting of carrizo
drm/amdgpu: update golden setting of iceland
drm/amd/amdgpu: change pptable output format from ASCII to binary
drm/amdgpu/ci: add mullins to default case for smc ucode
drm/amdgpu/gmc7: add missing mullins case
Commit 817820b022 ("powerpc/iommu: Support "hybrid" iommu/direct DMA
ops for coherent_mask < dma_mask) adds a check of coherent_dma_mask for
dma allocations.
Unfortunately current PASemi code does not set this value for the DMA
engine, which ends up with the default value of 0xffffffff, the result
is on a PASemi system with >2Gb ram and iommu enabled the the onboard
ethernet stops working due to an inability to allocate memory. Add an
initialisation to pci_dma_dev_setup_pasemi().
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
3 intel fixes.
* tag 'drm-intel-next-fixes-2016-08-05' of git://anongit.freedesktop.org/drm-intel:
drm/i915/fbdev: Check for the framebuffer before use
drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB
drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
The conversion of the rcar-du driver from the I2C slave encoder to the
DRM bridge API left the HDMI encoder's bridge pointer NULL, preventing
the bridge from being handled automatically by the DRM core. Fix it.
Fixes: 1d926114d8 ("drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The driver allocates the mutex but not initialize it.
Use mutex_init() on it to initialize it correctly.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
When multiple thermal zones are bound to the same cooling device, multiple
kernel threads may want to update the cooling device state by calling
thermal_cdev_update(). Having cdev not protected by a mutex can lead to a race
condition. Consider the following situation with two kernel threads k1 and k2:
Thread k1 Thread k2
||
|| call thermal_cdev_update()
|| ...
|| set_cur_state(cdev, target);
call power_actor_set_power() ||
... ||
instance->target = state; ||
cdev->updated = false; ||
|| cdev->updated = true;
|| // completes execution
call thermal_cdev_update() ||
// cdev->updated == true ||
return; ||
\/
time
k2 has already looped through the thermal instances looking for the deepest
cooling device state and is preempted right before setting cdev->updated to
true. Now, k1 runs, modifies the thermal instance state and sets cdev->updated
to false. Then, k1 is preempted and k2 continues the execution by setting
cdev->updated to true, therefore preventing k1 from performing the update.
Notice that this is not an issue if k2 looks at the instance->target modified by
k1 "after" it is assigned by k1. In fact, in this case the update will happen
anyway and k1 can safely return immediately from thermal_cdev_update().
This may lead to a situation where a thermal governor never updates the cooling
device. For example, this is the case for the step_wise governor: when calling
the function thermal_zone_trip_update(), the governor may always get a new state
equal to the old one (which, however, wasn't notified to the cooling device) and
will therefore skip the update.
CC: Zhang Rui <rui.zhang@intel.com>
CC: Eduardo Valentin <edubezval@gmail.com>
CC: Peter Feuerer <peter@piie.net>
Reported-by: Toby Huang <toby.huang@arm.com>
Signed-off-by: Michele Di Giorgio <michele.digiorgio@arm.com>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Added suspend/resume callback to disable/enable PCH thermal sensor
respectively. If the sensor is enabled by the BIOS, then the sensor status
will not be changed during suspend/resume.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
On no-MMU systems the application a5 register can be overwitten with the
address of the process data segment when processing application signals.
For flat format applications compiled with full absolute relocation this
effectively corrupts the a5 register on signal processing - and this very
quickly leads to process crash and often takes out the whole system with
a panic as well.
This has no effect on flat format applications compiled with the more
common PIC methods (such as -msep-data). These format applications reserve
a5 for the pointer to the data segment anyway - so it doesn't change it.
A long time ago the a5 register was used in the code packed into the user
stack to enable signal return processing. And so it had to be restored on
end of signal cleanup processing back to the original a5 user value. This
was historically done by saving away a5 in the sigcontext structure. At
some point (a long time back it seems) the a5 restore process was changed
and it was hard coded to put the user data segment address directly into a5.
Which is ok for the common PIC compiled application case, but breaks the
full relocation application code.
We no longer use this type of signal handling mechanism and so we don't
need to do anything special to save and restore a5 at all now. So remove the
code that hard codes a5 to the address of the user data segment.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Pull more block fixes from Jens Axboe:
"As mentioned in the pull the other day, a few more fixes for this
round, all related to the bio op changes in this series.
Two fixes, and then a cleanup, renaming bio->bi_rw to bio->bi_opf. I
wanted to do that change right after or right before -rc1, so that
risk of conflict was reduced. I just rebased the series on top of
current master, and no new ->bi_rw usage has snuck in"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: rename bio bi_rw to bi_opf
target: iblock_execute_sync_cache() should use bio_set_op_attrs()
mm: make __swap_writepage() use bio_set_op_attrs()
block/mm: make bdev_ops->rw_page() take a bool for read/write
Pull drm zpos property support from Dave Airlie:
"This tree was waiting on some media stuff I hadn't had time to get a
stable branchpoint off, so I just waited until it was all in your tree
first.
It's been around a bit on the list and shouldn't affect anything
outside adding the generic API and moving some ARM drivers to using
it"
* tag 'drm-for-v4.8-zpos' of git://people.freedesktop.org/~airlied/linux:
drm: rcar: use generic code for managing zpos plane property
drm/exynos: use generic code for managing zpos plane property
drm: sti: use generic zpos for plane
drm: add generic zpos property
Since commit 63a4cc2486, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.
No intended functional changes in this commit.
Signed-off-by: Jens Axboe <axboe@fb.com>
The original commit missed this function, it needs to mark it a
write flush.
Cc: Mike Christie <mchristi@redhat.com>
Fixes: e742fc32fc ("target: use bio op accessors")
Signed-off-by: Jens Axboe <axboe@fb.com>
Ville Syrjälä
Joonas Lahtinen
Pali Rohár
Vishal Verma
Ross Zwisler
Jens Axboe
Philipp Zabel
Liu Ying
Steve Longerbeam
Lothar Waßmann
Keith Packard
Daniel Vetter
Chris Wilson
David Herrmann
Rodrigo Vivi
Dave Airlie
Darren Stevens
Laurent Pinchart
Zhang Rui
Wei Yongjun
Kuninori Morimoto
Michele Di Giorgio
Petr Mladek
Srinivas Pandruvada
Greg Ungerer
Linus Torvalds