Граф коммитов

7 Коммитов

Автор SHA1 Сообщение Дата
Sreekanth Reddy 9c5000606d [SCSI] mpt3sas: Added a driver module parameter max_msix_vectors
Added a driver module parameter max_msix_vectors. Using this module parameter
the maximum number of MSI-X vectors could be set.

The number of MSI-X vectors used would be the minimum of MSI-X vectors
supported by the HBA, the number of CPU cores and the value set to
max_msix_vectors module parameter.

The default value of this module parameter is set to 8. The default value of
this parameter is set to 8 inorder to reduce the amount of memory required for
Reply Descriptor Post queue.  This is because with the higher MSI-X vectors,
some times kernel is not able to allocate the requested amount of memory and
crash is observed. To overcome this problem, the default value is set to 8.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-09-03 07:27:55 -07:00
Joe Lawrence cf9bd21a41 [SCSI] mpt3sas: fix cleanup on controller resource mapping failure
If mpt3sas_base_map_resources takes an early error path then its
counterpart, mpt3sas_base_free_resources needs to be careful about
cleaning up:

  1 - _base_mask_interrupts and _base_make_ioc_ready require memory
      mapped I/O registers, make sure that this is true.

  2 - _base_free_irq iterates over the adapter's reply_queue_list, so
      move this list head initialization out of _base_enable_msix to
      _scsih_probe so this will always be safe.

  3 - check that the controller PCI device and its BARs have been
      enabled before disabling them.

Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com>
Acked-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-26 18:53:45 +04:00
Sreekanth Reddy b453ff84de [SCSI] mpt3sas: Updated the Hardware timing requirements
Hardware timing requirements is updated in order to comply with firmware
requirement.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-09 08:39:03 +01:00
Sreekanth Reddy 48e3b9855d [SCSI] mpt3sas: 2013 source code copyright
The Copyright String in all mpt3sas files are changed to 2012-2013.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-09 08:34:03 +01:00
Wei Yongjun 25ef16d071 [SCSI] mpt3sas: remove unused variables
The variable 'chain_flags' and 'phy_number' are initialized but never used
otherwise, So remove those unused variables.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29 14:15:35 +11:00
Sachin Kamat 3735660d7b [SCSI] mpt3sas: Remove unneeded version.h header inclusion
linux/version.h is not necessary as detected by checkversion.pl script.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: "Sreekanth Reddy" <Sreekanth.reddy@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29 14:15:34 +11:00
Sreekanth Reddy f92363d123 [SCSI] mpt3sas: add new driver supporting 12GB SAS
These driver files are initially, substantially similar to mpt2sas but,
because mpt2sas is going into maintenance mode and mp3sas will become heavily
developed, we elected to keep the code bases separate.

Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
Reviewed-by: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-12-01 10:09:17 +00:00