Граф коммитов

143205 Коммитов

Автор SHA1 Сообщение Дата
Suresh Siddha a30469e792 x86: add linux kernel support for YMM state
Impact: save/restore Intel-AVX state properly between tasks

Intel Advanced Vector Extensions (AVX) introduce 256-bit vector processing
capability. More about AVX at http://software.intel.com/sites/avx

Add OS support for YMM state management using xsave/xrstor infrastructure
to support AVX.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
LKML-Reference: <1239402084.27006.8057.camel@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 13:08:56 +02:00
Marcin Slusarz 1ee4bd92a7 x86: fix wrong section of pat_disable & make it static
pat_disable cannot be __cpuinit anymore because it's called from pat_init
and the callchain looks like this:
pat_disable [cpuinit] <- pat_init <- generic_set_all <-
 ipi_handler <- set_mtrr <- (other non init/cpuinit functions)

WARNING: arch/x86/mm/built-in.o(.text+0x449e): Section mismatch in reference
from the function pat_init() to the function .cpuinit.text:pat_disable()
The function pat_init() references
the function __cpuinit pat_disable().
This is often because pat_init lacks a __cpuinit
annotation or the annotation of pat_disable is wrong.

Non CONFIG_X86_PAT version of pat_disable is static inline, so this version
can be static too (and there are no callers outside of this file).

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
LKML-Reference: <49DFB055.6070405@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 12:34:23 +02:00
Rakib Mullick 575922248c x86: Fix section mismatches in mpparse
Impact: fix section mismatch

In arch/x86/kernel/mpparse.c, smp_reserve_bootmem() has been called
and also refers to a function which is in .init section. Thus causes
the first warning. And check_irq_src() also requires an __init,
because it refers to an .init section.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <b9df5fa10904102004g51265d9axc8d07278bfdb6ba0@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 12:32:18 +02:00
Li Zefan 44e9c8b7ad tracing/filters: return proper error code when writing filter file
- propagate return value of filter_add_pred() to the user

- return -ENOSPC but not -ENOMEM or -EINVAL when the filter array
  is full

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <49E04CF0.3010105@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 11:59:29 +02:00
Li Zefan a3e0ab0507 tracing/filters: allow user input integer to be oct or hex
Before patch:

 # echo 'parent_pid == 0x10' > events/sched/sched_process_fork/filter
 # cat sched/sched_process_fork/filter
 parent_pid == 0

After patch:

 # cat sched/sched_process_fork/filter
 parent_pid == 16

Also check the input more strictly.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <49E04C53.4010600@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 11:59:28 +02:00
Li Zefan bcabd91c27 tracing/filters: fix NULL pointer dereference
Try this, and you'll see NULL pointer dereference bug:

  # echo -n 'parent_comm ==' > sched/sched_process_fork/filter

Because we passed NULL ptr to simple_strtoull().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <49E04C43.1050504@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 11:59:28 +02:00
Li Zefan 8433a40eb7 tracing/filters: NIL-terminate user input filter
Make sure messages from user space are NIL-terminated strings,
otherwise we could dump random memory while reading filter file.

Try this:
 # echo 'parent_comm ==' > events/sched/sched_process_fork/filter
 # cat events/sched/sched_process_fork/filter
 parent_comm == �

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <49E04C32.6060508@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12 11:59:27 +02:00
Linus Torvalds b0cbc861a3 Revert "ACPI battery: fix async boot oops"
This reverts commit 5d38258ec0, since the
underlying problem got fixed properly in the previous commit ("async:
Fix module loading async-work regression").

Cc: Arkadiusz Miskiewicz <a.miskiewicz@gmail.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-11 12:45:20 -07:00
Linus Torvalds d6de2c80e9 async: Fix module loading async-work regression
Several drivers use asynchronous work to do device discovery, and we
synchronize with them in the compiled-in case before we actually try to
mount root filesystems etc.

However, when compiled as modules, that synchronization is missing - the
module loading completes, but the driver hasn't actually finished
probing for devices, and that means that any user mode that expects to
use the devices after the 'insmod' is now potentially broken.

We already saw one case of a similar issue in the ACPI battery code,
where the kernel itself expected the module to be all done, and unmapped
the init memory - but the async device discovery was still running.
That got hacked around by just removing the "__init" (see commit
5d38258ec0 "ACPI battery: fix async boot
oops"), but the real fix is to just make the module loading wait for all
async work to be completed.

It will slow down module loading, but since common devices should be
built in anyway, and since the bug is really annoying and hard to handle
from user space (and caused several S3 resume regressions), the simple
fix to wait is the right one.

This fixes at least

	http://bugzilla.kernel.org/show_bug.cgi?id=13063

but probably a few other bugzilla entries too (12936, for example), and
is confirmed to fix Rafael's storage driver breakage after resume bug
report (no bugzilla entry).

We should also be able to now revert that ACPI battery fix.

Reported-and-tested-by: Rafael J. Wysocki <rjw@suse.com>
Tested-by: Heinz Diehl <htd@fancy-poultry.org>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-11 12:44:49 -07:00
Randy Dunlap 2810ae8c73 docbook: make cleandocs
Add a 'make cleandocs' target to clean up all generated
DocBook files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11 08:18:12 +02:00
Maxime Bizon 9e5ec86152 kbuild: fix spurious initramfs rebuild
When gen_initramfs_list is used to generate make dependencies, it
includes symbolic links, for which make tracks the link target. Any
change to that target will cause an initramfs rebuild, even if the
symlink points to something outside of the initramfs directory.

If the target happens to be /tmp, the rebuild occurs for each kernel
build, since gen_initramfs_list uses mktemp...

Proposed way to fix it is to omit symbolic links from generated
dependencies, but this has a small drawback: changing perm/owner on a
symlink will go unnoticed.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11 08:18:12 +02:00
Sam Ravnborg 20375bf825 Documentation: explain the difference between __bitwise and __bitwise__
Simply added explanation from Al Viro in the following mail:
http://lkml.indiana.edu/hypermail/linux/kernel/0802.2/3164.html

Cc: Al Viro <viro@ftp.linux.org.uk>
Cc:  Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11 08:18:11 +02:00
David Howells 5d7d18f5bc kbuild: make it possible for the linker to discard local symbols from vmlinux
Make it possible for the linker to discard local symbols from vmlinux as
they cause vmlinux to balloon when CONFIG_KALLSYMS=y and they cause
dump_stack() and get_wchan() to produce useless information under some
circumstances.

With this we add a config option (CONFIG_STRIP_ASM_SYMS) that will cause
the build to supply -X to the linker to tell it to strip temporary local
symbols.

This doesn't seem to cause gdb any problems.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11 08:18:10 +02:00
Jan Beulich 0fa3a88cfd kbuild: remove pointless strdup() on arguments passed to new_module() in modpost
new_module() itself already calls strdup() on its modname parameter.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11 08:18:10 +02:00
Kirill Smelkov fe8d0a4108 kbuild: fix a few typos in top-level Makefile
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Acked-by: Dmitry Gryazin <gdu@mns.spb.ru>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11 08:18:09 +02:00
Sam Ravnborg c7bb349e7c kbuild: introduce destination-y for exported headers
xtensa and arm have asked for a possibility to export headers
and locate them in a specific directory when exported.
Introduce destiantion-y to support this.

This patch in additiona adds some limited
documentation for the variables used for exported headers.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Oskar Schirmer <os@emlix.com>
Cc: Mikael Starvik <mikael.starvik@axis.com>
2009-04-11 08:18:08 +02:00
Peter Korsgaard 4774bb1ced kbuild: use git svn instead of git-svn in setlocalversion
Use the correct git <subcmd> syntax instead of the deprecated git-<subcmd>.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11 08:18:08 +02:00
Sam Ravnborg 612c280ef2 kconfig: fix update-po-config to accect backslash in input
Massimo Maiurana reported (slightly edited):

=====
In latest 2.6.29 "make update-po-config" fails at msguniq invocation
with an "invalid control sequence" error.
The offending string is the following, and it's located in
drivers/staging/panel/Kconfig:72:

    "'\e[L' which are specific to the LCD, and a few ANSI codes. The"

looks to me like gettext expects strings in printf format, so in
this case it thinks "\e" is a control sequence but doesn't recognise
it as a valid one.

A valid solution would be to tell kxgettext to automatically
escape this kind of strings in the */config.pot he produces, so that
msguniq would not complain.
=====

This patch implements the suggested escaping.

Reported-by: Massimo Maiurana <maiurana@gmail.com>
Tested-by: Massimo Maiurana <maiurana@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11 08:18:07 +02:00
Uwe Kleine-König 79ff807cf2 kbuild: fix option processing for -I in headerdep
-I takes an argument.  Without this change only a 1 is added to
@opt_include which is not helpful.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-04-11 08:18:07 +02:00
David Woodhouse e523b38e2f intel-iommu: Avoid panic() for DRHD at address zero.
If the BIOS does something obviously stupid, like claiming that the
registers for the IOMMU are at physical address zero, then print a nasty
message and abort, rather than trying to set up the IOMMU and then later
panicking.

It's becoming more and more obvious that trusting this stuff to the BIOS
was a mistake.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-10 22:27:48 -07:00
Linus Torvalds 7933a3cfba Remove stale include/asm-mn10300/.gitignore file
Requested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-10 14:07:51 -07:00
Joe Perches be79b09289 MAINTAINERS - Update MN10300 patterns
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:55 -07:00
Joe Perches 43fbc1eb71 MAINTAINERS - Update frv arch patterns
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:54 -07:00
Joe Perches 4a7fdb5f51 scripts/get_maintainer.pl - Allow multiple files on command line
Improve handling of "by:" signoffs
Sorting and frequency checks are done by name/email, not
by "by:" tag.

Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:54 -07:00
Joe Perches 69aefcead5 MAINTAINERS - Update Freescale sound patterns
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:53 -07:00
Joe Perches d5ca6918bc MAINTAINERS - Add additional patterns
for sections:

FINTEK F75375S HARDWARE MONITOR
PCA9532 LED DRIVER
S390 ZCRYPT DRIVER
SERIAL ATA (SATA) SUBSYSTEM
TMIO MMC DRIVER

Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:52 -07:00
Joe Perches 8081149332 MAINTAINERS - Add missing "/" to some pattern directories
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:51 -07:00
Joe Perches 7cfc51b9d3 MAINTAINERS - Update DRIVER CORE patterns
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:50 -07:00
Joe Perches 9db35182b9 MAINTAINERS - Update M68K patterns
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:49 -07:00
Joe Perches 127c49ae09 MAINTAINERS - Coalesce sections "DVB" and "Video for Linux"
Creating new section MEDIA INPUT INFRASTRUCTURE

Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:49 -07:00
Joe Perches 0632973db2 MAINTAINERS - Remove cyblafb frame buffer no longer in tree
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:48 -07:00
Joe Perches 8ed01bbb89 MAINTAINERS - Remove x86/Voyager no longer in tree
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:47 -07:00
Joe Perches e769980fee MAINTAINERS - Update FPU Emulator contact address and web page
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:46 -07:00
Joe Perches 932d18729d MAINTAINERS - i2c_tiny_usb T: should be W:
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:45 -07:00
Joe Perches cfe81f76c8 MAINTAINERS - Add Linus Torvalds' git
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:44 -07:00
Joe Perches 54e5881d0c MAINTAINERS - standardize "T: git urls"
Various forms of "T:        git" entries exist:
git kernel.org:/
git kernel.org/
git://git.kernel.org/
Standardize on "T:  git git://git.kernel.org/<foo>" where appropriate
Fix a few bad git path entries

Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:43 -07:00
Joe Perches 121ea23044 MAINTAINERS - Remove HP Fibre Channel HBA no longer in tree
Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:43 -07:00
Joe Perches 7d2c86b5a0 MAINTAINERS - Standardize style
Use one email address per line
Remove file patterns from section names
Use tab after :

Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:42 -07:00
Joe Perches 679655daff MAINTAINERS - Add file patterns
Better description of file pattern tag "F:"
Add file exclusion tag "X:"
Add patterns to sections

Signed-off-by: Joe Perches <joe@perches.com>
2009-04-10 13:10:41 -07:00
Joe Perches cb7301c7a3 Add scripts/get_maintainer.pl
A script to parse file pattern information in MAINTAINERS
and return selected information about a file or patch

usage: scripts/get_maintainer.pl [options] patchfile
       scripts/get_maintainer.pl [options] -f file
version: 0.14

MAINTAINERS field selection options:
  --email => print email address(es) if any
    --git => include git "*-by:" signers in commit count order
    --git-chief-penguins => include (Linus Torvalds)
    --git-min-signatures => number of signatures required (default: 1)
    --git-max-maintainers => maximum maintainers to add (default: 5)
    --git-since => git history to use (default: 1-year-ago)
    --m => include maintainer(s) if any
    --n => include name 'Full Name <addr@domain.tld>'
    --l => include list(s) if any
    --s => include subscriber only list(s) if any
  --scm => print SCM tree(s) if any
  --status => print status if any
  --subsystem => print subsystem name if any
  --web => print website(s) if any

Output type options:
  --separator [, ] => separator for multiple entries on 1 line
  --multiline => print 1 entry per line

Default options:
  [--email --git --m --n --l --multiline]

Other options:
  --version => show version
  --help => show this help information

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
2009-04-10 13:10:40 -07:00
Tejun Heo 066123a535 percpu: unbreak alpha percpu
For the time being, move the generic percpu_*() accessors to
linux/percpu.h.

asm-generic/percpu.h is meant to carry generic stuff for low level
stuff - declarations, definitions and pointer offset calculation
and so on but not for generic interface.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10 21:36:18 +02:00
Linus Torvalds 1e17d774db Merge git://git.infradead.org/~dwmw2/firmware-2.6
* git://git.infradead.org/~dwmw2/firmware-2.6:
  qla1280: Fix off-by-some error in firmware loading.
  Add README.AddingFirmware file. Basically telling people not to.
  firmware: Remove newly-added slicoss and sxg firmware images
  firmware/WHENCE: Add missing origin information for Ambassador atmsar11.fw
  ALSA: wavefront - Always use request_firmware()
  Remove fdump tool for av7110 firmware
  firmware: convert av7110 driver to request_firmware()
  Partially revert "V4L/DVB (9533): cx88: Add support for TurboSight TBS8910 DVB-S PCI card"
  Revert "fix modules_install via NFS"

Add-add conflicts in firmware/WHENCE fixed manually
2009-04-10 12:01:22 -07:00
Masami Hiramatsu 9b987aeb4a x86: fix set_fixmap to use phys_addr_t
Impact: fix kprobes crash on 32-bit with RAM above 4G

Use phys_addr_t for receiving a physical address argument
instead of unsigned long. This allows fixmap to handle
pages higher than 4GB on x86-32.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: systemtap-ml <systemtap@sources.redhat.com>
Cc: Gary Hade <garyhade@us.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <49DE3695.6040800@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10 20:27:13 +02:00
Linus Torvalds d848223808 Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300:
  Separate out the proc- and unit-specific header directories from the general
  Move arch headers from include/asm-mn10300/ to arch/mn10300/include/asm/.
2009-04-10 10:01:49 -07:00
Linus Torvalds 5de4c51d2a Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv:
  FRV: Move to arch/frv/include/asm/
  FRV: Fix indentation errors to keep git-am happy when moving arch header files
2009-04-10 07:47:13 -07:00
Zhaolei 0462b5664b ftrace: Output REC->var instead of __entry->var for trace format
print fmt: "irq=%d return=%s", __entry->irq, __entry->ret ? \"handled\" : \"unhandled\"

"__entry" should be convert to "REC" by __stringify() macro.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <49DC679D.2090901@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10 15:48:53 +02:00
Zhaolei 8f7c2c3731 Make __stringify support variable argument macros too
For example:

  __stringify(__entry->irq, __entry->ret)

will now convert it to:

  "REC->irq, REC->ret"

It also still supports single arguments as the old macro did.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <49DC6751.30308@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10 15:48:52 +02:00
David Howells 2f2a2132ff Separate out the proc- and unit-specific header directories from the general
MN10300 arch headers and place them instead in the same directories as contain
the .c files for the processor and unit implementations.

This permits the symlinks include/asm/proc and include/asm/unit to be
dispensed with.  This does, however, require that #include <asm/proc/xxx.h> be
converted to #include <proc/xxx.h> and similarly for asm/unit -> unit.

Signed-off-by: David Howells <dhowells@redhat.com>
2009-04-10 14:33:48 +01:00
David Howells da7616610c Move arch headers from include/asm-mn10300/ to arch/mn10300/include/asm/.
Signed-off-by: David Howells <dhowells@redhat.com>
2009-04-10 14:19:03 +01:00
Andy Grover a0d22f485a x86: Document get_user_pages_fast()
While better than get_user_pages(), the usage of gupf(),
especially the return values and the fact that it can
potentially only partially pin the range, warranted some
documentation.

Signed-off-by: Andy Grover <andy.grover@oracle.com>
Cc: npiggin@suse.de
Cc: akpm@linux-foundation.org
LKML-Reference: <1239320729-3262-1-git-send-email-andy.grover@oracle.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10 13:14:08 +02:00