When the hash table slot array allocation fails in hashtab_init(),
h->size is left initialized with a non-zero value, but the h->htable
pointer is NULL. This may then cause a NULL pointer dereference, since
the policydb code relies on the assumption that even after a failed
hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called
on it. Yet, these detect an empty hashtab only by looking at the size.
Fix this by making sure that hashtab_init() always leaves behind a valid
empty hashtab when the allocation fails.
Cc: stable@vger.kernel.org
Fixes: 03414a49ad ("selinux: do not allocate hashtabs dynamically")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch reverts two prior patches, e7310c9402
("security: implement sctp_assoc_established hook in selinux") and
7c2ef0240e ("security: add sctp_assoc_established hook"), which
create the security_sctp_assoc_established() LSM hook and provide a
SELinux implementation. Unfortunately these two patches were merged
without proper review (the Reviewed-by and Tested-by tags from
Richard Haines were for previous revisions of these patches that
were significantly different) and there are outstanding objections
from the SELinux maintainers regarding these patches.
Work is currently ongoing to correct the problems identified in the
reverted patches, as well as others that have come up during review,
but it is unclear at this point in time when that work will be ready
for inclusion in the mainline kernel. In the interest of not keeping
objectionable code in the kernel for multiple weeks, and potentially
a kernel release, we are reverting the two problematic patches.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Different from selinux_inet_conn_established(), it also gives the
secid to asoc->peer_secid in selinux_sctp_assoc_established(),
as one UDP-type socket may have more than one asocs.
Note that peer_secid in asoc will save the peer secid for this
asoc connection, and peer_sid in sksec will just keep the peer
secid for the latest connection. So the right use should be do
peeloff for UDP-type socket if there will be multiple asocs in
one socket, so that the peeloff socket has the right label for
its asoc.
v1->v2:
- call selinux_inet_conn_established() to reduce some code
duplication in selinux_sctp_assoc_established(), as Ondrej
suggested.
- when doing peeloff, it calls sock_create() where it actually
gets secid for socket from socket_sockcreate_sid(). So reuse
SECSID_WILD to ensure the peeloff socket keeps using that
secid after calling selinux_sctp_sk_clone() for client side.
Fixes: 72e89f5008 ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Reviewed-by: Richard Haines <richard_c_haines@btinternet.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to move secid and peer_secid from endpoint to association,
and pass asoc to sctp_assoc_request and sctp_sk_clone instead of ep. As
ep is the local endpoint and asoc represents a connection, and in SCTP
one sk/ep could have multiple asoc/connection, saving secid/peer_secid
for new asoc will overwrite the old asoc's.
Note that since asoc can be passed as NULL, security_sctp_assoc_request()
is moved to the place right after the new_asoc is created in
sctp_sf_do_5_1B_init() and sctp_sf_do_unexpected_init().
v1->v2:
- fix the description of selinux_netlbl_skbuff_setsid(), as Jakub noticed.
- fix the annotation in selinux_sctp_assoc_request(), as Richard Noticed.
Fixes: 72e89f5008 ("security: Add support for SCTP security hooks")
Reported-by: Prashanth Prahlad <pprahlad@redhat.com>
Reviewed-by: Richard Haines <richard_c_haines@btinternet.com>
Tested-by: Richard Haines <richard_c_haines@btinternet.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=sb8J
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add LSM/SELinux/Smack controls and auditing for io-uring.
As usual, the individual commit descriptions have more detail, but we
were basically missing two things which we're adding here:
+ establishment of a proper audit context so that auditing of
io-uring ops works similarly to how it does for syscalls (with
some io-uring additions because io-uring ops are *not* syscalls)
+ additional LSM hooks to enable access control points for some of
the more unusual io-uring features, e.g. credential overrides.
The additional audit callouts and LSM hooks were done in conjunction
with the io-uring folks, based on conversations and RFC patches
earlier in the year.
- Fixup the binder credential handling so that the proper credentials
are used in the LSM hooks; the commit description and the code
comment which is removed in these patches are helpful to understand
the background and why this is the proper fix.
- Enable SELinux genfscon policy support for securityfs, allowing
improved SELinux filesystem labeling for other subsystems which make
use of securityfs, e.g. IMA.
* tag 'selinux-pr-20211101' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
security: Return xattr name from security_dentry_init_security()
selinux: fix a sock regression in selinux_ip_postroute_compat()
binder: use cred instead of task for getsecid
binder: use cred instead of task for selinux checks
binder: use euid from cred instead of using task
LSM: Avoid warnings about potentially unused hook variables
selinux: fix all of the W=1 build warnings
selinux: make better use of the nf_hook_state passed to the NF hooks
selinux: fix race condition when computing ocontext SIDs
selinux: remove unneeded ipv6 hook wrappers
selinux: remove the SELinux lockdown implementation
selinux: enable genfscon labeling for securityfs
Smack: Brutalist io_uring support
selinux: add support for the io_uring access controls
lsm,io_uring: add LSM hooks to io_uring
io_uring: convert io_uring to the secure anon inode interface
fs: add anon_inode_getfile_secure() similar to anon_inode_getfd_secure()
audit: add filtering for io_uring records
audit,io_uring,io-wq: add some basic audit support to io_uring
audit: prepare audit_context for use in calling contexts beyond syscalls
Right now security_dentry_init_security() only supports single security
label and is used by SELinux only. There are two users of this hook,
namely ceph and nfs.
NFS does not care about xattr name. Ceph hardcodes the xattr name to
security.selinux (XATTR_NAME_SELINUX).
I am making changes to fuse/virtiofs to send security label to virtiofsd
and I need to send xattr name as well. I also hardcoded the name of
xattr to security.selinux.
Stephen Smalley suggested that it probably is a good idea to modify
security_dentry_init_security() to also return name of xattr so that
we can avoid this hardcoding in the callers.
This patch adds a new parameter "const char **xattr_name" to
security_dentry_init_security() and LSM puts the name of xattr
too if caller asked for it (xattr_name != NULL).
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
[PM: fixed typos in the commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Unfortunately we can't rely on nf_hook_state->sk being the proper
originating socket so revert to using skb_to_full_sk(skb).
Fixes: 1d1e1ded13 ("selinux: make better use of the nf_hook_state passed to the NF hooks")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since binder was integrated with selinux, it has passed
'struct task_struct' associated with the binder_proc
to represent the source and target of transactions.
The conversion of task to SID was then done in the hook
implementations. It turns out that there are race conditions
which can result in an incorrect security context being used.
Fix by using the 'struct cred' saved during binder_open and pass
it to the selinux subsystem.
Cc: stable@vger.kernel.org # 5.14 (need backport for earlier stables)
Fixes: 79af73079d ("Add security hooks to binder and implement the hooks for SELinux.")
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Todd Kjos <tkjos@google.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
There were a number of places in the code where the function
definition did not match the associated comment block as well
at least one file where the appropriate header files were not
included (missing function declaration/prototype); this patch
fixes all of these issue such that building the SELinux code
with "W=1" is now warning free.
% make W=1 security/selinux/
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch builds on a previous SELinux/netfilter patch by Florian
Westphal and makes better use of the nf_hook_state variable passed
into the SELinux/netfilter hooks as well as a number of other small
cleanups in the related code.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Current code contains a lot of racy patterns when converting an
ocontext's context structure to an SID. This is being done in a "lazy"
fashion, such that the SID is looked up in the SID table only when it's
first needed and then cached in the "sid" field of the ocontext
structure. However, this is done without any locking or memory barriers
and is thus unsafe.
Between commits 24ed7fdae6 ("selinux: use separate table for initial
SID lookup") and 66f8e2f03c ("selinux: sidtab reverse lookup hash
table"), this race condition lead to an actual observable bug, because a
pointer to the shared sid field was passed directly to
sidtab_context_to_sid(), which was using this location to also store an
intermediate value, which could have been read by other threads and
interpreted as an SID. In practice this caused e.g. new mounts to get a
wrong (seemingly random) filesystem context, leading to strange denials.
This bug has been spotted in the wild at least twice, see [1] and [2].
Fix the race condition by making all the racy functions use a common
helper that ensures the ocontext::sid accesses are made safely using the
appropriate SMP constructs.
Note that security_netif_sid() was populating the sid field of both
contexts stored in the ocontext, but only the first one was actually
used. The SELinux wiki's documentation on the "netifcon" policy
statement [3] suggests that using only the first context is intentional.
I kept only the handling of the first context here, as there is really
no point in doing the SID lookup for the unused one.
I wasn't able to reproduce the bug mentioned above on any kernel that
includes commit 66f8e2f03c, even though it has been reported that the
issue occurs with that commit, too, just less frequently. Thus, I wasn't
able to verify that this patch fixes the issue, but it makes sense to
avoid the race condition regardless.
[1] https://github.com/containers/container-selinux/issues/89
[2] https://lists.fedoraproject.org/archives/list/selinux@lists.fedoraproject.org/thread/6DMTAMHIOAOEMUAVTULJD45JZU7IBAFM/
[3] https://selinuxproject.org/page/NetworkStatements#netifcon
Cc: stable@vger.kernel.org
Cc: Xinjie Zheng <xinjie@google.com>
Reported-by: Sujithra Periasamy <sujithra@google.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Netfilter places the protocol number the hook function is getting called
from in state->pf, so we can use that instead of an extra wrapper.
While at it, remove one-line wrappers too and make
selinux_ip_{out,forward,postroute} useable as hook function.
Signed-off-by: Florian Westphal <fw@strlen.de>
Message-Id: <20211011202229.28289-1-fw@strlen.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-10-07
1) Fix a sysbot reported shift-out-of-bounds in xfrm_get_default.
From Pavel Skripkin.
2) Fix XFRM_MSG_MAPPING ABI breakage. The new XFRM_MSG_MAPPING
messages were accidentally not paced at the end.
Fix by Eugene Syromiatnikov.
3) Fix the uapi for the default policy, use explicit field and macros
and make it accessible to userland.
From Nicolas Dichtel.
4) Fix a missing rcu lock in xfrm_notify_userpolicy().
From Nicolas Dichtel.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
NOTE: This patch intentionally omits any "Fixes:" metadata or stable
tagging since it removes a SELinux access control check; while
removing the control point is the right thing to do moving forward,
removing it in stable kernels could be seen as a regression.
The original SELinux lockdown implementation in 59438b4647
("security,lockdown,selinux: implement SELinux lockdown") used the
current task's credentials as both the subject and object in the
SELinux lockdown hook, selinux_lockdown(). Unfortunately that
proved to be incorrect in a number of cases as the core kernel was
calling the LSM lockdown hook in places where the credentials from
the "current" task_struct were not the correct credentials to use
in the SELinux access check.
Attempts were made to resolve this by adding a credential pointer
to the LSM lockdown hook as well as suggesting that the single hook
be split into two: one for user tasks, one for kernel tasks; however
neither approach was deemed acceptable by Linus. Faced with the
prospect of either changing the subj/obj in the access check to a
constant context (likely the kernel's label) or removing the SELinux
lockdown check entirely, the SELinux community decided that removing
the lockdown check was preferable.
The supporting changes to the general LSM layer are left intact, this
patch only removes the SELinux implementation.
Acked-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add support for genfscon per-file labeling of securityfs files.
This allows for separate labels and thereby access control for
different files. For example a genfscon statement
genfscon securityfs /integrity/ima/policy \
system_u:object_r:ima_policy_t:s0
will set a private label to the IMA policy file and thus allow to
control the ability to set the IMA policy. Setting labels directly
with setxattr(2), e.g. by chcon(1) or setfiles(8), is still not
supported.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: line width fixes in the commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Jann Horn reported a problem with commit eb1231f73c ("selinux:
clarify task subjective and objective credentials") where some LSM
hooks were attempting to access the subjective credentials of a task
other than the current task. Generally speaking, it is not safe to
access another task's subjective credentials and doing so can cause
a number of problems.
Further, while looking into the problem, I realized that Smack was
suffering from a similar problem brought about by a similar commit
1fb057dcde ("smack: differentiate between subjective and objective
task credentials").
This patch addresses this problem by restoring the use of the task's
objective credentials in those cases where the task is other than the
current executing task. Not only does this resolve the problem
reported by Jann, it is arguably the correct thing to do in these
cases.
Cc: stable@vger.kernel.org
Fixes: eb1231f73c ("selinux: clarify task subjective and objective credentials")
Fixes: 1fb057dcde ("smack: differentiate between subjective and objective task credentials")
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch implements two new io_uring access controls, specifically
support for controlling the io_uring "personalities" and
IORING_SETUP_SQPOLL. Controlling the sharing of io_urings themselves
is handled via the normal file/inode labeling and sharing mechanisms.
The io_uring { override_creds } permission restricts which domains
the subject domain can use to override it's own credentials.
Granting a domain the io_uring { override_creds } permission allows
it to impersonate another domain in io_uring operations.
The io_uring { sqpoll } permission restricts which domains can create
asynchronous io_uring polling threads. This is important from a
security perspective as operations queued by this asynchronous thread
inherit the credentials of the thread creator by default; if an
io_uring is shared across process/domain boundaries this could result
in one domain impersonating another. Controlling the creation of
sqpoll threads, and the sharing of io_urings across processes, allow
policy authors to restrict the ability of one domain to impersonate
another via io_uring.
As a quick summary, this patch adds a new object class with two
permissions:
io_uring { override_creds sqpoll }
These permissions can be seen in the two simple policy statements
below:
allow domA_t domB_t : io_uring { override_creds };
allow domA_t self : io_uring { sqpoll };
Signed-off-by: Paul Moore <paul@paul-moore.com>
Commit 2d151d3907 ("xfrm: Add possibility to set the default to block
if we have no policy") broke ABI by changing the value of the XFRM_MSG_MAPPING
enum item, thus also evading the build-time check
in security/selinux/nlmsgtab.c:selinux_nlmsg_lookup for presence of proper
security permission checks in nlmsg_xfrm_perms. Fix it by placing
XFRM_MSG_SETDEFAULT/XFRM_MSG_GETDEFAULT to the end of the enum, right before
__XFRM_MSG_MAX, and updating the nlmsg_xfrm_perms accordingly.
Fixes: 2d151d3907 ("xfrm: Add possibility to set the default to block if we have no policy")
References: https://lore.kernel.org/netdev/20210901151402.GA2557@altlinux.org/
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Acked-by: Antony Antony <antony.antony@secunet.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYS4c6hQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5b4OAP9l7cnpkOzVUtjoNIIYdIiKTDp+Kb8v
3o08lxtyzALfKgEAlrizzLfphqLa2yCdxbyaTjkx19J7tav27xVti8uVGgs=
=hIxY
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
- Limit the allowed hash algorithms when writing security.ima xattrs or
verifying them, based on the IMA policy and the configured hash
algorithms.
- Return the calculated "critical data" measurement hash and size to
avoid code duplication. (Preparatory change for a proposed LSM.)
- and a single patch to address a compiler warning.
* tag 'integrity-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
IMA: reject unknown hash algorithms in ima_get_hash_algo
IMA: prevent SETXATTR_CHECK policy rules with unavailable algorithms
IMA: introduce a new policy option func=SETXATTR_CHECK
IMA: add a policy option to restrict xattr hash algorithms on appraisal
IMA: add support to restrict the hash algorithms used for file appraisal
IMA: block writes of the security.ima xattr with unsupported algorithms
IMA: remove the dependency on CRYPTO_MD5
ima: Add digest and digest_len params to the functions to measure a buffer
ima: Return int in the functions to measure a buffer
ima: Introduce ima_get_current_hash_algo()
IMA: remove -Wmissing-prototypes warning
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read
out again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs
in kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by
the router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105)
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JDGD
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
Pull selinux update from Paul Moore:
"We've got an unusually small SELinux pull request for v5.15 that
consists of only one (?!) patch that is really pretty minor when you
look at it.
Unsurprisingly it passes all of our tests and merges cleanly on top of
your tree right now, please merge this for v5.15"
* tag 'selinux-pr-20210830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: return early for possible NULL audit buffers
Build failure in drivers/net/wwan/mhi_wwan_mbim.c:
add missing parameter (0, assuming we don't want buffer pre-alloc).
Conflict in drivers/net/dsa/sja1105/sja1105_main.c between:
589918df93 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too")
0fac6aa098 ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode")
Follow the instructions from the commit message of the former commit
- removed the if conditions. When looking at commit 589918df93 ("net:
dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too")
note that the mask_iotag fields get removed by the following patch.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It should not return 0 when SID 0 is assigned to isids.
This patch fixes it.
Cc: stable@vger.kernel.org
Fixes: e3e0b582c3 ("selinux: remove unused initial SIDs and improve handling")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
[PM: remove changelog from description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add basic Kconfig, an initial (empty) af_mctp source object, and
{AF,PF}_MCTP definitions, and the required definitions for a new
protocol type.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch performs the final modification necessary to pass the buffer
measurement to callers, so that they provide a functionality similar to
ima_file_hash(). It adds the 'digest' and 'digest_len' parameters to
ima_measure_critical_data() and process_buffer_measurement().
These functions calculate the digest even if there is no suitable rule in
the IMA policy and, in this case, they simply return 1 before generating a
new measurement entry.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
audit_log_start() may return NULL in below cases:
- when audit is not initialized.
- when audit backlog limit exceeds.
After the call to audit_log_start() is made and then possible NULL audit
buffer argument is passed to audit_log_*() functions,
audit_log_*() functions return immediately in case of a NULL audit buffer
argument.
But it is optimal to return early when audit_log_start() returns NULL,
because it is not necessary for audit_log_*() functions to be called with
NULL audit buffer argument.
So add exception handling for possible NULL audit buffers where
return value can be handled from callers.
Signed-off-by: Austin Kim <austin.kim@lge.com>
[PM: tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
... along with avc_has_perm_flags() itself, since now it's identical
to avc_has_perm() (as pointed out by Paul Moore)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[PM: add "selinux:" prefix to subj and tweak for length]
Signed-off-by: Paul Moore <paul@paul-moore.com>
dump_common_audit_data() is safe to use under rcu_read_lock() now;
no need for AVC_NONBLOCKING and games around it
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Fix function name and add comment for parameter state in ss/services.c
kernel-doc to remove some warnings found by running make W=1 LLVM=1.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
While trying to address a Coverity warning that the dev_name string
might end up unterminated when strcpy'ing it in
selinux_ib_endport_manage_subnet(), I realized that it is possible (and
simpler) to just pass the dev_name pointer directly, rather than copying
the string to a buffer.
The ibendport variable goes out of scope at the end of the function
anyway, so the lifetime of the dev_name pointer will never be shorter
than that of ibendport, thus we can safely just pass the dev_name
pointer and be done with it.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Variable rc is set to '-EINVAL' but this value is never read as
it is overwritten or not used later on, hence it is a redundant
assignment and can be removed.
Cleans up the following clang-analyzer warning:
security/selinux/ss/services.c:2103:3: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].
security/selinux/ss/services.c:2079:2: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].
security/selinux/ss/services.c:2071:2: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].
security/selinux/ss/services.c:2062:2: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].
security/selinux/ss/policydb.c:2592:3: warning: Value stored to 'rc' is
never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Minor documentation update.
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
seliunx_xfrm_policy_lookup() is hooks of security_xfrm_policy_lookup().
The dir argument is uselss in security_xfrm_policy_lookup(). So
remove the dir argument from selinux_xfrm_policy_lookup() and
security_xfrm_policy_lookup().
Signed-off-by: Zhongjun Tan <tanzhongjun@yulong.com>
[PM: reformat the subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
We can do the allocation + copying of expr.nodes in one go using
kmemdup().
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=uCN4
-----END PGP SIGNATURE-----
Merge tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Landlock LSM from James Morris:
"Add Landlock, a new LSM from Mickaël Salaün.
Briefly, Landlock provides for unprivileged application sandboxing.
From Mickaël's cover letter:
"The goal of Landlock is to enable to restrict ambient rights (e.g.
global filesystem access) for a set of processes. Because Landlock
is a stackable LSM [1], it makes possible to create safe security
sandboxes as new security layers in addition to the existing
system-wide access-controls. This kind of sandbox is expected to
help mitigate the security impact of bugs or unexpected/malicious
behaviors in user-space applications. Landlock empowers any
process, including unprivileged ones, to securely restrict
themselves.
Landlock is inspired by seccomp-bpf but instead of filtering
syscalls and their raw arguments, a Landlock rule can restrict the
use of kernel objects like file hierarchies, according to the
kernel semantic. Landlock also takes inspiration from other OS
sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
Pledge/Unveil.
In this current form, Landlock misses some access-control features.
This enables to minimize this patch series and ease review. This
series still addresses multiple use cases, especially with the
combined use of seccomp-bpf: applications with built-in sandboxing,
init systems, security sandbox tools and security-oriented APIs [2]"
The cover letter and v34 posting is here:
https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/
See also:
https://landlock.io/
This code has had extensive design discussion and review over several
years"
Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]
* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
landlock: Enable user space to infer supported features
landlock: Add user and kernel documentation
samples/landlock: Add a sandbox manager example
selftests/landlock: Add user space tests
landlock: Add syscall implementations
arch: Wire up Landlock syscalls
fs,security: Add sb_delete hook
landlock: Support filesystem access-control
LSM: Infrastructure management of the superblock
landlock: Add ptrace restrictions
landlock: Set up the security framework and manage credentials
landlock: Add ruleset and domain management
landlock: Add object management
Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to
walk all map elements in a more robust and easier to verify
fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF
on s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices
which don't need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability
on next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is
slow in reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take
place correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP
packets before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used
to define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
-independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and
bnxt support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP
which define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay
for packets sampled from switch HW (and corresponding egress
and policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP
forwarding, bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface
to distribute MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x -
11-port Ethernet switch with 8x 1-Gigabit Ethernet
and 3x 10-Gigabit interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365
and BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack,
matching on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode
changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=vcbA
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets
- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks
- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)
- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)
- ipv6: segment routing: add support for IPv4 decapsulation
- icmp: add support for RFC 8335 extended PROBE messages
- inet: use bigger hash table for IP ID generation
- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original
- tcp: reorder tcp_congestion_ops for better cache locality
- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow
- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic
- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO
- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls
- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.
- allow specifing ifindex when device is moved to another namespace
- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily
- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic
- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing
Device APIs:
- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs
- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)
- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)
- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)
- dsa: improve support for sandwiched LAGs with bridge and DSA
- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support
- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver
- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames
- phy: add support for Clause-45 PHY Loopback
- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)
New hardware/drivers:
- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.
- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches
- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches
- ath11k: support for QCN9074 a 802.11ax device
- Bluetooth: Broadcom BCM4330 and BMC4334
- phy: Marvell 88X2222 transceiver support
- mdio: add BCM6368 MDIO mux bus controller
- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips
- mana: driver for Microsoft Azure Network Adapter (MANA)
- Actions Semi Owl Ethernet MAC
- can: driver for ETAS ES58X CAN/USB interfaces
Pure driver changes:
- add XDP support to: enetc, igc, stmmac
- add AF_XDP support to: stmmac
- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary
- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting
- ice, iavf: support flow filters, UDP Segmentation Offload
- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic
- ionic:
- implement Rx page reuse
- support HW PTP time-stamping
- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.
- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment
- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping
- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.
- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)
- mt7601u: enable TDLS support
- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"
* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...
-----BEGIN PGP SIGNATURE-----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=HTEy
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Add support for measuring the SELinux state and policy capabilities
using IMA.
- A handful of SELinux/NFS patches to compare the SELinux state of one
mount with a set of mount options. Olga goes into more detail in the
patch descriptions, but this is important as it allows more
flexibility when using NFS and SELinux context mounts.
- Properly differentiate between the subjective and objective LSM
credentials; including support for the SELinux and Smack. My clumsy
attempt at a proper fix for AppArmor didn't quite pass muster so John
is working on a proper AppArmor patch, in the meantime this set of
patches shouldn't change the behavior of AppArmor in any way. This
change explains the bulk of the diffstat beyond security/.
- Fix a problem where we were not properly terminating the permission
list for two SELinux object classes.
* tag 'selinux-pr-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: add proper NULL termination to the secclass_map permissions
smack: differentiate between subjective and objective task credentials
selinux: clarify task subjective and objective credentials
lsm: separate security_task_getsecid() into subjective and objective variants
nfs: account for selinux security context when deciding to share superblock
nfs: remove unneeded null check in nfs_fill_super()
lsm,selinux: add new hook to compare new mount to an existing mount
selinux: fix misspellings using codespell tool
selinux: fix misspellings using codespell tool
selinux: measure state and policy capabilities
selinux: Allow context mounts for unpriviliged overlayfs
Move management of the superblock->sb_security blob out of the
individual security modules and into the security infrastructure.
Instead of allocating the blobs from within the modules, the modules
tell the infrastructure how much space is required, and the space is
allocated there.
Cc: John Johansen <john.johansen@canonical.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210422154123.13086-6-mic@digikod.net
Signed-off-by: James Morris <jamorris@linux.microsoft.com>
This patch adds the missing NULL termination to the "bpf" and
"perf_event" object class permission lists.
This missing NULL termination should really only affect the tools
under scripts/selinux, with the most important being genheaders.c,
although in practice this has not been an issue on any of my dev/test
systems. If the problem were to manifest itself it would likely
result in bogus permissions added to the end of the object class;
thankfully with no access control checks using these bogus
permissions and no policies defining these permissions the impact
would likely be limited to some noise about undefined permissions
during policy load.
Cc: stable@vger.kernel.org
Fixes: ec27c3568a ("selinux: bpf: Add selinux check for eBPF syscall operations")
Fixes: da97e18458 ("perf_event: Add support for LSM and SELinux checks")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Conflicts:
MAINTAINERS
- keep Chandrasekar
drivers/net/ethernet/mellanox/mlx5/core/en_main.c
- simple fix + trust the code re-added to param.c in -next is fine
include/linux/bpf.h
- trivial
include/linux/ethtool.h
- trivial, fix kdoc while at it
include/linux/skmsg.h
- move to relevant place in tcp.c, comment re-wrapped
net/core/skmsg.c
- add the sk = sk // sk = NULL around calls
net/tipc/crypto.c
- trivial
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mGDl
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20210409' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
"Three SELinux fixes.
These fix known problems relating to (re)loading SELinux policy or
changing the policy booleans, and pass our test suite without problem"
* tag 'selinux-pr-20210409' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix race between old and new sidtab
selinux: fix cond_list corruption when changing booleans
selinux: make nslot handling in avtab more robust
Since commit 1b8b31a2e6 ("selinux: convert policy read-write lock to
RCU"), there is a small window during policy load where the new policy
pointer has already been installed, but some threads may still be
holding the old policy pointer in their read-side RCU critical sections.
This means that there may be conflicting attempts to add a new SID entry
to both tables via sidtab_context_to_sid().
See also (and the rest of the thread):
https://lore.kernel.org/selinux/CAFqZXNvfux46_f8gnvVvRYMKoes24nwm2n3sPbMjrB8vKTW00g@mail.gmail.com/
Fix this by installing the new policy pointer under the old sidtab's
spinlock along with marking the old sidtab as "frozen". Then, if an
attempt to add new entry to a "frozen" sidtab is detected, make
sidtab_context_to_sid() return -ESTALE to indicate that a new policy
has been installed and that the caller will have to abort the policy
transaction and try again after re-taking the policy pointer (which is
guaranteed to be a newer policy). This requires adding a retry-on-ESTALE
logic to all callers of sidtab_context_to_sid(), but fortunately these
are easy to determine and aren't that many.
This seems to be the simplest solution for this problem, even if it
looks somewhat ugly. Note that other places in the kernel (e.g.
do_mknodat() in fs/namei.c) use similar stale-retry patterns, so I think
it's reasonable.
Cc: stable@vger.kernel.org
Fixes: 1b8b31a2e6 ("selinux: convert policy read-write lock to RCU")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently, duplicate_policydb_cond_list() first copies the whole
conditional avtab and then tries to link to the correct entries in
cond_dup_av_list() using avtab_search(). However, since the conditional
avtab may contain multiple entries with the same key, this approach
often fails to find the right entry, potentially leading to wrong rules
being activated/deactivated when booleans are changed.
To fix this, instead start with an empty conditional avtab and add the
individual entries one-by-one while building the new av_lists. This
approach leads to the correct result, since each entry is present in the
av_lists exactly once.
The issue can be reproduced with Fedora policy as follows:
# sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
allow ftpd_t public_content_rw_t:dir { add_name create link remove_name rename reparent rmdir setattr unlink watch watch_reads write }; [ ftpd_anon_write ]:True
# setsebool ftpd_anon_write=off ftpd_connect_all_unreserved=off ftpd_connect_db=off ftpd_full_access=off
On fixed kernels, the sesearch output is the same after the setsebool
command:
# sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
allow ftpd_t public_content_rw_t:dir { add_name create link remove_name rename reparent rmdir setattr unlink watch watch_reads write }; [ ftpd_anon_write ]:True
While on the broken kernels, it will be different:
# sesearch -s ftpd_t -t public_content_rw_t -c dir -p create -A
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
allow ftpd_t non_security_file_type:dir { add_name create getattr ioctl link lock open read remove_name rename reparent rmdir search setattr unlink watch watch_reads write }; [ ftpd_full_access ]:True
While there, also simplify the computation of nslots. This changes the
nslots values for nrules 2 or 3 to just two slots instead of 4, which
makes the sequence more consistent.
Cc: stable@vger.kernel.org
Fixes: c7c556f1e8 ("selinux: refactor changing booleans")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
1. Make sure all fileds are initialized in avtab_init().
2. Slightly refactor avtab_alloc() to use the above fact.
3. Use h->nslot == 0 as a sentinel in the access functions to prevent
dereferencing h->htable when it's not allocated.
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
SELinux has a function, task_sid(), which returns the task's
objective credentials, but unfortunately is used in a few places
where the subjective task credentials should be used. Most notably
in the new security_task_getsecid_subj() LSM hook.
This patch fixes this and attempts to make things more obvious by
introducing a new function, task_sid_subj(), and renaming the
existing task_sid() function to task_sid_obj().
This patch also adds an interesting function in task_sid_binder().
The task_sid_binder() function has a comment which hopefully
describes it's reason for being, but it basically boils down to the
simple fact that we can't safely access another task's subjective
credentials so in the case of binder we need to stick with the
objective credentials regardless.
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Of the three LSMs that implement the security_task_getsecid() LSM
hook, all three LSMs provide the task's objective security
credentials. This turns out to be unfortunate as most of the hook's
callers seem to expect the task's subjective credentials, although
a small handful of callers do correctly expect the objective
credentials.
This patch is the first step towards fixing the problem: it splits
the existing security_task_getsecid() hook into two variants, one
for the subjective creds, one for the objective creds.
void security_task_getsecid_subj(struct task_struct *p,
u32 *secid);
void security_task_getsecid_obj(struct task_struct *p,
u32 *secid);
While this patch does fix all of the callers to use the correct
variant, in order to keep this patch focused on the callers and to
ease review, the LSMs continue to use the same implementation for
both hooks. The net effect is that this patch should not change
the behavior of the kernel in any way, it will be up to the latter
LSM specific patches in this series to change the hook
implementations and return the correct credentials.
Acked-by: Mimi Zohar <zohar@linux.ibm.com> (IMA)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a new hook that takes an existing super block and a new mount
with new options and determines if new options confict with an
existing mount or not.
A filesystem can use this new hook to determine if it can share
the an existing superblock with a new superblock for the new mount.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
[PM: tweak the subject line, fix tab/space problems]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=mFaE
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20210322' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
"Three SELinux patches:
- Fix a problem where a local variable is used outside its associated
function. Thankfully this can only be triggered by reloading the
SELinux policy, which is a restricted operation for other obvious
reasons.
- Fix some incorrect, and inconsistent, audit and printk messages
when loading the SELinux policy.
All three patches are relatively minor and have been through our
testing with no failures"
* tag 'selinux-pr-20210322' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinuxfs: unify policy load error reporting
selinux: fix variable scope issue in live sidtab conversion
selinux: don't log MAC_POLICY_LOAD record on failed policy load
Let's drop the pr_err()s from sel_make_policy_nodes() and just add one
pr_warn_ratelimited() call to the sel_make_policy_nodes() error path in
sel_write_load().
Changing from error to warning makes sense, since after 02a52c5c8c
("selinux: move policy commit after updating selinuxfs"), this error
path no longer leads to a broken selinuxfs tree (it's just kept in the
original state and policy load is aborted).
I also added _ratelimited to be consistent with the other prtin in the
same function (it's probably not necessary, but can't really hurt...
there are likely more important error messages to be printed when
filesystem entry creation starts erroring out).
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Commit 02a52c5c8c ("selinux: move policy commit after updating
selinuxfs") moved the selinux_policy_commit() call out of
security_load_policy() into sel_write_load(), which caused a subtle yet
rather serious bug.
The problem is that security_load_policy() passes a reference to the
convert_params local variable to sidtab_convert(), which stores it in
the sidtab, where it may be accessed until the policy is swapped over
and RCU synchronized. Before 02a52c5c8c, selinux_policy_commit() was
called directly from security_load_policy(), so the convert_params
pointer remained valid all the way until the old sidtab was destroyed,
but now that's no longer the case and calls to sidtab_context_to_sid()
on the old sidtab after security_load_policy() returns may cause invalid
memory accesses.
This can be easily triggered using the stress test from commit
ee1a84fdfe ("selinux: overhaul sidtab to fix bug and improve
performance"):
```
function rand_cat() {
echo $(( $RANDOM % 1024 ))
}
function do_work() {
while true; do
echo -n "system_u:system_r:kernel_t:s0:c$(rand_cat),c$(rand_cat)" \
>/sys/fs/selinux/context 2>/dev/null || true
done
}
do_work >/dev/null &
do_work >/dev/null &
do_work >/dev/null &
while load_policy; do echo -n .; sleep 0.1; done
kill %1
kill %2
kill %3
```
Fix this by allocating the temporary sidtab convert structures
dynamically and passing them among the
selinux_policy_{load,cancel,commit} functions.
Fixes: 02a52c5c8c ("selinux: move policy commit after updating selinuxfs")
Cc: stable@vger.kernel.org
Tested-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
[PM: merge fuzz in security.h and services.c]
Signed-off-by: Paul Moore <paul@paul-moore.com>
If sel_make_policy_nodes() fails, we should jump to 'out', not 'out1',
as the latter would incorrectly log an MAC_POLICY_LOAD audit record,
even though the policy hasn't actually been reloaded. The 'out1' jump
label now becomes unused and can be removed.
Fixes: 02a52c5c8c ("selinux: move policy commit after updating selinuxfs")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
- RTM_NEWNEXTHOP et.al. that handle resilient groups will have a new nested
attribute, NHA_RES_GROUP, whose elements are attributes NHA_RES_GROUP_*.
- RTM_NEWNEXTHOPBUCKET et.al. is a suite of new messages that will
currently serve only for dumping of individual buckets of resilient next
hop groups. For nexthop group buckets, these messages will carry a nested
attribute NHA_RES_BUCKET, whose elements are attributes NHA_RES_BUCKET_*.
There are several reasons why a new suite of messages is created for
nexthop buckets instead of overloading the information on the existing
RTM_{NEW,DEL,GET}NEXTHOP messages.
First, a nexthop group can contain a large number of nexthop buckets (4k
is not unheard of). This imposes limits on the amount of information that
can be encoded for each nexthop bucket given a netlink message is limited
to 64k bytes.
Second, while RTM_NEWNEXTHOPBUCKET is only used for notifications at
this point, in the future it can be extended to provide user space with
control over nexthop buckets configuration.
- The new group type is NEXTHOP_GRP_TYPE_RES. Note that nexthop code is
adjusted to bounce groups with that type for now.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A typo is f out by codespell tool in 422th line of security.h:
$ codespell ./security/selinux/include/
./security.h:422: thie ==> the, this
Fix a typo found by codespell.
Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn>
[PM: subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
A typo is found out by codespell tool in 16th line of hashtab.c
$ codespell ./security/selinux/ss/
./hashtab.c:16: rouding ==> rounding
Fix a typo found by codespell.
Signed-off-by: Xiong Zhenwu <xiong.zhenwu@zte.com.cn>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
SELinux stores the configuration state and the policy capabilities
in kernel memory. Changes to this data at runtime would have an impact
on the security guarantees provided by SELinux. Measuring this data
through IMA subsystem provides a tamper-resistant way for
an attestation service to remotely validate it at runtime.
Measure the configuration state and policy capabilities by calling
the IMA hook ima_measure_critical_data().
To enable SELinux data measurement, the following steps are required:
1, Add "ima_policy=critical_data" to the kernel command line arguments
to enable measuring SELinux data at boot time.
For example,
BOOT_IMAGE=/boot/vmlinuz-5.11.0-rc3+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data
2, Add the following rule to /etc/ima/ima-policy
measure func=CRITICAL_DATA label=selinux
Sample measurement of SELinux state and policy capabilities:
10 2122...65d8 ima-buf sha256:13c2...1292 selinux-state 696e...303b
Execute the following command to extract the measured data
from the IMA's runtime measurements list:
grep "selinux-state" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6 | xxd -r -p
The output should be a list of key-value pairs. For example,
initialized=1;enforcing=0;checkreqprot=1;network_peer_controls=1;open_perms=1;extended_socket_class=1;always_check_network=0;cgroup_seclabel=1;nnp_nosuid_transition=1;genfs_seclabel_symlinks=0;
To verify the measurement is consistent with the current SELinux state
reported on the system, compare the integer values in the following
files with those set in the IMA measurement (using the following commands):
- cat /sys/fs/selinux/enforce
- cat /sys/fs/selinux/checkreqprot
- cat /sys/fs/selinux/policy_capabilities/[capability_file]
Note that the actual verification would be against an expected state
and done on a separate system (likely an attestation server) requiring
"initialized=1;enforcing=1;checkreqprot=0;"
for a secure state and then whatever policy capabilities are actually
set in the expected policy (which can be extracted from the policy
itself via seinfo, for example).
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Now overlayfs allow unpriviliged mounts. That is root inside a non-init
user namespace can mount overlayfs. This is being added in 5.11 kernel.
Giuseppe tried to mount overlayfs with option "context" and it failed
with error -EACCESS.
$ su test
$ unshare -rm
$ mkdir -p lower upper work merged
$ mount -t overlay -o lowerdir=lower,workdir=work,upperdir=upper,userxattr,context='system_u:object_r:container_file_t:s0' none merged
This fails with -EACCESS. It works if option "-o context" is not specified.
Little debugging showed that selinux_set_mnt_opts() returns -EACCESS.
So this patch adds "overlay" to the list, where it is fine to specific
context from non init_user_ns.
Reported-by: Giuseppe Scrivano <gscrivan@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
[PM: trimmed the changelog from the description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdfhttps://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
1d7b902e28
In order to support idmapped mounts, filesystems need to be changed
and mark themselves with the FS_ALLOW_IDMAP flag in fs_flags. The
patches to convert individual filesystem are not very large or
complicated overall as can be seen from the included fat, ext4, and
xfs ports. Patches for other filesystems are actively worked on and
will be sent out separately. The xfstestsuite can be used to verify
that port has been done correctly.
The mount_setattr() syscall is motivated independent of the idmapped
mounts patches and it's been around since July 2019. One of the most
valuable features of the new mount api is the ability to perform
mounts based on file descriptors only.
Together with the lookup restrictions available in the openat2()
RESOLVE_* flag namespace which we added in v5.6 this is the first time
we are close to hardened and race-free (e.g. symlinks) mounting and
path resolution.
While userspace has started porting to the new mount api to mount
proper filesystems and create new bind-mounts it is currently not
possible to change mount options of an already existing bind mount in
the new mount api since the mount_setattr() syscall is missing.
With the addition of the mount_setattr() syscall we remove this last
restriction and userspace can now fully port to the new mount api,
covering every use-case the old mount api could. We also add the
crucial ability to recursively change mount options for a whole mount
tree, both removing and adding mount options at the same time. This
syscall has been requested multiple times by various people and
projects.
There is a simple tool available at
https://github.com/brauner/mount-idmapped
that allows to create idmapped mounts so people can play with this
patch series. I'll add support for the regular mount binary should you
decide to pull this in the following weeks:
Here's an example to a simple idmapped mount of another user's home
directory:
u1001@f2-vm:/$ sudo ./mount --idmap both:1000:1001:1 /home/ubuntu/ /mnt
u1001@f2-vm:/$ ls -al /home/ubuntu/
total 28
drwxr-xr-x 2 ubuntu ubuntu 4096 Oct 28 22:07 .
drwxr-xr-x 4 root root 4096 Oct 28 04:00 ..
-rw------- 1 ubuntu ubuntu 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 ubuntu ubuntu 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 ubuntu ubuntu 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 ubuntu ubuntu 807 Feb 25 2020 .profile
-rw-r--r-- 1 ubuntu ubuntu 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 ubuntu ubuntu 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ ls -al /mnt/
total 28
drwxr-xr-x 2 u1001 u1001 4096 Oct 28 22:07 .
drwxr-xr-x 29 root root 4096 Oct 28 22:01 ..
-rw------- 1 u1001 u1001 3154 Oct 28 22:12 .bash_history
-rw-r--r-- 1 u1001 u1001 220 Feb 25 2020 .bash_logout
-rw-r--r-- 1 u1001 u1001 3771 Feb 25 2020 .bashrc
-rw-r--r-- 1 u1001 u1001 807 Feb 25 2020 .profile
-rw-r--r-- 1 u1001 u1001 0 Oct 16 16:11 .sudo_as_admin_successful
-rw------- 1 u1001 u1001 1144 Oct 28 00:43 .viminfo
u1001@f2-vm:/$ touch /mnt/my-file
u1001@f2-vm:/$ setfacl -m u:1001:rwx /mnt/my-file
u1001@f2-vm:/$ sudo setcap -n 1001 cap_net_raw+ep /mnt/my-file
u1001@f2-vm:/$ ls -al /mnt/my-file
-rw-rwxr--+ 1 u1001 u1001 0 Oct 28 22:14 /mnt/my-file
u1001@f2-vm:/$ ls -al /home/ubuntu/my-file
-rw-rwxr--+ 1 ubuntu ubuntu 0 Oct 28 22:14 /home/ubuntu/my-file
u1001@f2-vm:/$ getfacl /mnt/my-file
getfacl: Removing leading '/' from absolute path names
# file: mnt/my-file
# owner: u1001
# group: u1001
user::rw-
user:u1001:rwx
group::rw-
mask::rwx
other::r--
u1001@f2-vm:/$ getfacl /home/ubuntu/my-file
getfacl: Removing leading '/' from absolute path names
# file: home/ubuntu/my-file
# owner: ubuntu
# group: ubuntu
user::rw-
user:ubuntu:rwx
group::rw-
mask::rwx
other::r--"
* tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: (41 commits)
xfs: remove the possibly unused mp variable in xfs_file_compat_ioctl
xfs: support idmapped mounts
ext4: support idmapped mounts
fat: handle idmapped mounts
tests: add mount_setattr() selftests
fs: introduce MOUNT_ATTR_IDMAP
fs: add mount_setattr()
fs: add attr_flags_to_mnt_flags helper
fs: split out functions to hold writers
namespace: only take read lock in do_reconfigure_mnt()
mount: make {lock,unlock}_mount_hash() static
namespace: take lock_mount_hash() directly when changing flags
nfs: do not export idmapped mounts
overlayfs: do not mount on top of idmapped mounts
ecryptfs: do not mount on top of idmapped mounts
ima: handle idmapped mounts
apparmor: handle idmapped mounts
fs: make helpers idmap mount aware
exec: handle idmapped mounts
would_dump: handle idmapped mounts
...
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEEjSMCCC7+cjo3nszSa3kkZrA+cVoFAmArRwIUHHpvaGFyQGxp
bnV4LmlibS5jb20ACgkQa3kkZrA+cVo6JxAAkZHDhv6Zv7FfVsFjE7yDJwRFBu4o
jnAowPxa/xl6MlR2ICTFLHjOimEcpvzySO2IM85WCxjRYaNevITOxEZE+qfE/Byo
K1MuZOSXXBa2+AgO1Tku+ZNrQvzTsphgtvhlSD9ReN7P84C/rxG5YDomME+8/6rR
QH7Ly/izyc3VNKq7nprT8F2boJ0UxpcwNHZiH2McQD3UvUaZOecwpcpvth5pbgad
Ej2r72Q+IR0voqM/T1dc4TjW5Wcw/m27vhGQoOfQ5f+as5r9r1cPSWj0wRJTkATo
F/SiKuyWUwOGkRO8I9aaXXzTBgcJw/7MmZe8yNDg5QJrUzD8F5cdjlHZdsnz5BJq
tLo4kUsR4xMePEppJ4a10ZUDQa737j97C20xTwOHf6mKGIqmoooGAsjW9xUyYqHU
rYuLP4qB7ua4j8Uz9zVJazjgQWPQ+8Ad9MkjQLLhr00Azpz4mVweWVGjCJQC0pky
Jr2H4xj3JLAoygqMWfJxr9aVBpfy4Wmo0U29ryZuxZUr178qSXoL3QstGWXRa2MN
TwzpgHi1saItQ6iXAO0HB6Tsw0h8INyjrm7c3ANbmBwMsYMYeKcTG87+Z0LkK82w
C5SW2uQT9aLBXx9lZx8z0RpxygO1cW+KjlZxRYSfQa/ev/aF2kBz0ruGQgvqai4K
ceh/cwrYjrCbFVc=
=mojv
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"New is IMA support for measuring kernel critical data, as per usual
based on policy. The first example measures the in memory SELinux
policy. The second example measures the kernel version.
In addition are four bug fixes to address memory leaks and a missing
'static' function declaration"
* tag 'integrity-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Make function integrity_add_key() static
ima: Free IMA measurement buffer after kexec syscall
ima: Free IMA measurement buffer on error
IMA: Measure kernel version in early boot
selinux: include a consumer of the new IMA critical data hook
IMA: define a builtin critical data measurement policy
IMA: extend critical data hook to limit the measurement based on a label
IMA: limit critical data measurement based on a label
IMA: add policy rule to measure critical data
IMA: define a hook to measure kernel integrity critical data
IMA: add support to measure buffer data hash
IMA: generalize keyring specific measurement constructs
evm: Fix memleak in init_desc
When interacting with user namespace and non-user namespace aware
filesystem capabilities the vfs will perform various security checks to
determine whether or not the filesystem capabilities can be used by the
caller, whether they need to be removed and so on. The main
infrastructure for this resides in the capability codepaths but they are
called through the LSM security infrastructure even though they are not
technically an LSM or optional. This extends the existing security hooks
security_inode_removexattr(), security_inode_killpriv(),
security_inode_getsecurity() to pass down the mount's user namespace and
makes them aware of idmapped mounts.
In order to actually get filesystem capabilities from disk the
capability infrastructure exposes the get_vfs_caps_from_disk() helper.
For user namespace aware filesystem capabilities a root uid is stored
alongside the capabilities.
In order to determine whether the caller can make use of the filesystem
capability or whether it needs to be ignored it is translated according
to the superblock's user namespace. If it can be translated to uid 0
according to that id mapping the caller can use the filesystem
capabilities stored on disk. If we are accessing the inode that holds
the filesystem capabilities through an idmapped mount we map the root
uid according to the mount's user namespace. Afterwards the checks are
identical to non-idmapped mounts: reading filesystem caps from disk
enforces that the root uid associated with the filesystem capability
must have a mapping in the superblock's user namespace and that the
caller is either in the same user namespace or is a descendant of the
superblock's user namespace. For filesystems that are mountable inside
user namespace the caller can just mount the filesystem and won't
usually need to idmap it. If they do want to idmap it they can create an
idmapped mount and mark it with a user namespace they created and which
is thus a descendant of s_user_ns. For filesystems that are not
mountable inside user namespaces the descendant rule is trivially true
because the s_user_ns will be the initial user namespace.
If the initial user namespace is passed nothing changes so non-idmapped
mounts will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-11-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
When interacting with extended attributes the vfs verifies that the
caller is privileged over the inode with which the extended attribute is
associated. For posix access and posix default extended attributes a uid
or gid can be stored on-disk. Let the functions handle posix extended
attributes on idmapped mounts. If the inode is accessed through an
idmapped mount we need to map it according to the mount's user
namespace. Afterwards the checks are identical to non-idmapped mounts.
This has no effect for e.g. security xattrs since they don't store uids
or gids and don't perform permission checks on them like posix acls do.
Link: https://lore.kernel.org/r/20210121131959.646623-10-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Tycho Andersen <tycho@tycho.pizza>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
The inode_owner_or_capable() helper determines whether the caller is the
owner of the inode or is capable with respect to that inode. Allow it to
handle idmapped mounts. If the inode is accessed through an idmapped
mount it according to the mount's user namespace. Afterwards the checks
are identical to non-idmapped mounts. If the initial user namespace is
passed nothing changes so non-idmapped mounts will see identical
behavior as before.
Similarly, allow the inode_init_owner() helper to handle idmapped
mounts. It initializes a new inode on idmapped mounts by mapping the
fsuid and fsgid of the caller from the mount's user namespace. If the
initial user namespace is passed nothing changes so non-idmapped mounts
will see identical behavior as before.
Link: https://lore.kernel.org/r/20210121131959.646623-7-christian.brauner@ubuntu.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
SELinux stores the active policy in memory, so the changes to this data
at runtime would have an impact on the security guarantees provided
by SELinux. Measuring in-memory SELinux policy through IMA subsystem
provides a secure way for the attestation service to remotely validate
the policy contents at runtime.
Measure the hash of the loaded policy by calling the IMA hook
ima_measure_critical_data(). Since the size of the loaded policy
can be large (several MB), measure the hash of the policy instead of
the entire policy to avoid bloating the IMA log entry.
To enable SELinux data measurement, the following steps are required:
1, Add "ima_policy=critical_data" to the kernel command line arguments
to enable measuring SELinux data at boot time.
For example,
BOOT_IMAGE=/boot/vmlinuz-5.10.0-rc1+ root=UUID=fd643309-a5d2-4ed3-b10d-3c579a5fab2f ro nomodeset security=selinux ima_policy=critical_data
2, Add the following rule to /etc/ima/ima-policy
measure func=CRITICAL_DATA label=selinux
Sample measurement of the hash of SELinux policy:
To verify the measured data with the current SELinux policy run
the following commands and verify the output hash values match.
sha256sum /sys/fs/selinux/policy | cut -d' ' -f 1
grep "selinux-policy-hash" /sys/kernel/security/integrity/ima/ascii_runtime_measurements | tail -1 | cut -d' ' -f 6
Note that the actual verification of SELinux policy would require loading
the expected policy into an identical kernel on a pristine/known-safe
system and run the sha256sum /sys/kernel/selinux/policy there to get
the expected hash.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This change uses the anon_inodes and LSM infrastructure introduced in
the previous patches to give SELinux the ability to control
anonymous-inode files that are created using the new
anon_inode_getfd_secure() function.
A SELinux policy author detects and controls these anonymous inodes by
adding a name-based type_transition rule that assigns a new security
type to anonymous-inode files created in some domain. The name used
for the name-based transition is the name associated with the
anonymous inode for file listings --- e.g., "[userfaultfd]" or
"[perf_event]".
Example:
type uffd_t;
type_transition sysadm_t sysadm_t : anon_inode uffd_t "[userfaultfd]";
allow sysadm_t uffd_t:anon_inode { create };
(The next patch in this series is necessary for making userfaultfd
support this new interface. The example above is just
for exposition.)
Signed-off-by: Daniel Colascione <dancol@google.com>
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When a superblock is assigned the SECURITY_FS_USE_XATTR behavior by the
policy yet it lacks xattr support, try to fall back to genfs rather than
rejecting the mount. If a genfscon rule is found for the filesystem,
then change the behavior to SECURITY_FS_USE_GENFS, otherwise reject the
mount as before. A similar fallback is already done in security_fs_use()
if no behavior specification is found for the given filesystem.
This is needed e.g. for virtiofs, which may or may not support xattrs
depending on the backing host filesystem.
Example:
# seinfo --genfs | grep ' ramfs'
genfscon ramfs / system_u:object_r:ramfs_t:s0
# echo '(fsuse xattr ramfs (system_u object_r fs_t ((s0) (s0))))' >ramfs_xattr.cil
# semodule -i ramfs_xattr.cil
# mount -t ramfs none /mnt
Before:
mount: /mnt: mount(2) system call failed: Operation not supported.
After:
(mount succeeds)
# ls -Zd /mnt
system_u:object_r:ramfs_t:s0 /mnt
See also:
https://lore.kernel.org/selinux/20210105142148.GA3200@redhat.com/T/https://github.com/fedora-selinux/selinux-policy/pull/478
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This is motivated by a perfomance regression of selinux_xfrm_enabled()
that happened on a RHEL kernel due to false sharing between
selinux_xfrm_refcount and (the late) selinux_ss.policy_rwlock (i.e. the
.bss section memory layout changed such that they happened to share the
same cacheline). Since the policy rwlock's memory region was modified
upon each read-side critical section, the readers of
selinux_xfrm_refcount had frequent cache misses, eventually leading to a
significant performance degradation under a TCP SYN flood on a system
with many cores (32 in this case, but it's detectable on less cores as
well).
While upstream has since switched to RCU locking, so the same can no
longer happen here, selinux_xfrm_refcount could still share a cacheline
with another frequently written region, thus marking it __read_mostly
still makes sense. __read_mostly helps, because it will put the symbol
in a separate section along with other read-mostly variables, so there
should never be a clash with frequently written data.
Since selinux_xfrm_refcount is modified only in case of an explicit
action, it should be safe to do this (i.e. it shouldn't disrupt other
read-mostly variables too much).
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
All of these are never modified outside initcalls, so they can be
__ro_after_init.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
It is not referenced outside selinuxfs.c, so remove its extern header
declaration and make it static.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Its value is actually not changed anywhere, so it can be substituted for
a direct call to audit_update_lsm_rules().
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
All of sel_ib_pkey_list, sel_netif_list, sel_netnode_list, and
sel_netport_list are declared but never used. Remove them.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
When inode has no listxattr op of its own (e.g. squashfs) vfs_listxattr
calls the LSM inode_listsecurity hooks to list the xattrs that LSMs will
intercept in inode_getxattr hooks.
When selinux LSM is installed but not initialized, it will list the
security.selinux xattr in inode_listsecurity, but will not intercept it
in inode_getxattr. This results in -ENODATA for a getxattr call for an
xattr returned by listxattr.
This situation was manifested as overlayfs failure to copy up lower
files from squashfs when selinux is built-in but not initialized,
because ovl_copy_xattr() iterates the lower inode xattrs by
vfs_listxattr() and vfs_getxattr().
Match the logic of inode_listsecurity to that of inode_getxattr and
do not list the security.selinux xattr if selinux is not initialized.
Reported-by: Michael Labriola <michael.d.labriola@gmail.com>
Tested-by: Michael Labriola <michael.d.labriola@gmail.com>
Link: https://lore.kernel.org/linux-unionfs/2nv9d47zt7.fsf@aldarion.sourceruckus.org/
Fixes: c8e222616c ("selinux: allow reading labels before policy is loaded")
Cc: stable@vger.kernel.org#v5.9+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The MPTCP protocol uses a specific protocol value, even if
it's an extension to TCP. Additionally, MPTCP sockets
could 'fall-back' to TCP at run-time, depending on peer MPTCP
support and available resources.
As a consequence of the specific protocol number, selinux
applies the raw_socket class to MPTCP sockets.
Existing TCP application converted to MPTCP - or forced to
use MPTCP socket with user-space hacks - will need an
updated policy to run successfully.
This change lets selinux attach the TCP socket class to
MPTCP sockets, too, so that no policy changes are needed in
the above scenario.
Note that the MPTCP is setting, propagating and updating the
security context on all the subflows and related request
socket.
Link: https://lore.kernel.org/linux-security-module/CAHC9VhTaK3xx0hEGByD2zxfF7fadyPP1kb-WeWH_YCyq9X-sRg@mail.gmail.com/T/#t
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
[PM: tweaked subject's prefix]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=6Cqb
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"While we have a small number of SELinux patches for v5.11, there are a
few changes worth highlighting:
- Change the LSM network hooks to pass flowi_common structs instead
of the parent flowi struct as the LSMs do not currently need the
full flowi struct and they do not have enough information to use it
safely (missing information on the address family).
This patch was discussed both with Herbert Xu (representing team
netdev) and James Morris (representing team
LSMs-other-than-SELinux).
- Fix how we handle errors in inode_doinit_with_dentry() so that we
attempt to properly label the inode on following lookups instead of
continuing to treat it as unlabeled.
- Tweak the kernel logic around allowx, auditallowx, and dontauditx
SELinux policy statements such that the auditx/dontauditx are
effective even without the allowx statement.
Everything passes our test suite"
* tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
lsm,selinux: pass flowi_common instead of flowi to the LSM hooks
selinux: Fix fall-through warnings for Clang
selinux: drop super_block backpointer from superblock_security_struct
selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling
selinux: allow dontauditx and auditallowx rules to take effect without allowx
selinux: fix error initialization in inode_doinit_with_dentry()
A followup change to tcp_request_sock_op would have to drop the 'const'
qualifier from the 'route_req' function as the
'security_inet_conn_request' call is moved there - and that function
expects a 'struct sock *'.
However, it turns out its also possible to add a const qualifier to
security_inet_conn_request instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As pointed out by Herbert in a recent related patch, the LSM hooks do
not have the necessary address family information to use the flowi
struct safely. As none of the LSMs currently use any of the protocol
specific flowi information, replace the flowi pointers with pointers
to the address family independent flowi_common struct.
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=qpR+
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20201113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"One small SELinux patch to make sure we return an error code when an
allocation fails. It passes all of our tests, but given the nature of
the patch that isn't surprising"
* tag 'selinux-pr-20201113' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: Fix error return code in sel_ib_pkey_sid_slow()
Fix to return a negative error code from the error handling case
instead of 0 in function sel_ib_pkey_sid_slow(), as done elsewhere
in this function.
Cc: stable@vger.kernel.org
Fixes: 409dcf3153 ("selinux: Add a cache for quicker retreival of PKey SIDs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
It appears to have been needed for selinux_complete_init() in the past,
but today it's useless.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
A previous fix, commit 83370b31a9 ("selinux: fix error initialization
in inode_doinit_with_dentry()"), changed how failures were handled
before a SELinux policy was loaded. Unfortunately that patch was
potentially problematic for two reasons: it set the isec->initialized
state without holding a lock, and it didn't set the inode's SELinux
label to the "default" for the particular filesystem. The later can
be a problem if/when a later attempt to revalidate the inode fails
and SELinux reverts to the existing inode label.
This patch should restore the default inode labeling that existed
before the original fix, without affecting the LABEL_INVALID marking
such that revalidation will still be attempted in the future.
Fixes: 83370b31a9 ("selinux: fix error initialization in inode_doinit_with_dentry()")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Tested-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This allows for dontauditing very specific ioctls e.g. TCGETS without
dontauditing every ioctl or granting additional permissions.
Now either an allowx, dontauditx or auditallowx rules enables checking
for extended permissions.
Signed-off-by: Jonathan Hettwer <j2468h@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Mark the inode security label as invalid if we cannot find
a dentry so that we will retry later rather than marking it
initialized with the unlabeled SID.
Fixes: 9287aed2ad ("selinux: Convert isec->lock into a spinlock")
Signed-off-by: Tianyue Ren <rentianyue@kylinos.cn>
[PM: minor comment tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX4g8YQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngKgCeNpArCP/9vQJRK9upnDm8ZLunSCUAn1wUT/2A
/bTQ42c/WRQ+LU828GSM
=6sO2
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the big set of char, misc, and other assorted driver subsystem
patches for 5.10-rc1.
There's a lot of different things in here, all over the drivers/
directory. Some summaries:
- soundwire driver updates
- habanalabs driver updates
- extcon driver updates
- nitro_enclaves new driver
- fsl-mc driver and core updates
- mhi core and bus updates
- nvmem driver updates
- eeprom driver updates
- binder driver updates and fixes
- vbox minor bugfixes
- fsi driver updates
- w1 driver updates
- coresight driver updates
- interconnect driver updates
- misc driver updates
- other minor driver updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (396 commits)
binder: fix UAF when releasing todo list
docs: w1: w1_therm: Fix broken xref, mistakes, clarify text
misc: Kconfig: fix a HISI_HIKEY_USB dependency
LSM: Fix type of id parameter in kernel_post_load_data prototype
misc: Kconfig: add a new dependency for HISI_HIKEY_USB
firmware_loader: fix a kernel-doc markup
w1: w1_therm: make w1_poll_completion static
binder: simplify the return expression of binder_mmap
test_firmware: Test partial read support
firmware: Add request_partial_firmware_into_buf()
firmware: Store opt_flags in fw_priv
fs/kernel_file_read: Add "offset" arg for partial reads
IMA: Add support for file reads without contents
LSM: Add "contents" flag to kernel_read_file hook
module: Call security_kernel_post_load_data()
firmware_loader: Use security_post_load_data()
LSM: Introduce kernel_post_load_data() hook
fs/kernel_read_file: Add file_size output argument
fs/kernel_read_file: Switch buffer size arg to size_t
fs/kernel_read_file: Remove redundant size argument
...
-----BEGIN PGP SIGNATURE-----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=NNLw
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"A decent number of SELinux patches for v5.10, twenty two in total. The
highlights are listed below, but all of the patches pass our test
suite and merge cleanly.
- A number of changes to how the SELinux policy is loaded and managed
inside the kernel with the goal of improving the atomicity of a
SELinux policy load operation.
These changes account for the bulk of the diffstat as well as the
patch count. A special thanks to everyone who contributed patches
and fixes for this work.
- Convert the SELinux policy read-write lock to RCU.
- A tracepoint was added for audited SELinux access control events;
this should help provide a more unified backtrace across kernel and
userspace.
- Allow the removal of security.selinux xattrs when a SELinux policy
is not loaded.
- Enable policy capabilities in SELinux policies created with the
scripts/selinux/mdp tool.
- Provide some "no sooner than" dates for the SELinux checkreqprot
sysfs deprecation"
* tag 'selinux-pr-20201012' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: (22 commits)
selinux: provide a "no sooner than" date for the checkreqprot removal
selinux: Add helper functions to get and set checkreqprot
selinux: access policycaps with READ_ONCE/WRITE_ONCE
selinux: simplify away security_policydb_len()
selinux: move policy mutex to selinux_state, use in lockdep checks
selinux: fix error handling bugs in security_load_policy()
selinux: convert policy read-write lock to RCU
selinux: delete repeated words in comments
selinux: add basic filtering for audit trace events
selinux: add tracepoint on audited events
selinux: Create new booleans and class dirs out of tree
selinux: Standardize string literal usage for selinuxfs directory names
selinux: Refactor selinuxfs directory populating functions
selinux: Create function for selinuxfs directory cleanup
selinux: permit removing security.selinux xattr before policy load
selinux: fix memdup.cocci warnings
selinux: avoid dereferencing the policy prior to initialization
selinux: fix allocation failure check on newpolicy->sidtab
selinux: refactor changing booleans
selinux: move policy commit after updating selinuxfs
...
As with the kernel_load_data LSM hook, add a "contents" flag to the
kernel_read_file LSM hook that indicates whether the LSM can expect
a matching call to the kernel_post_read_file LSM hook with the full
contents of the file. With the coming addition of partial file read
support for kernel_read_file*() API, the LSM will no longer be able
to always see the entire contents of a file during the read calls.
For cases where the LSM must read examine the complete file contents,
it will need to do so on its own every time the kernel_read_file
hook is called with contents=false (or reject such cases). Adjust all
existing LSMs to retain existing behavior.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-12-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a few places in the kernel where LSMs would like to have
visibility into the contents of a kernel buffer that has been loaded or
read. While security_kernel_post_read_file() (which includes the
buffer) exists as a pairing for security_kernel_read_file(), no such
hook exists to pair with security_kernel_load_data().
Earlier proposals for just using security_kernel_post_read_file() with a
NULL file argument were rejected (i.e. "file" should always be valid for
the security_..._file hooks, but it appears at least one case was
left in the kernel during earlier refactoring. (This will be fixed in
a subsequent patch.)
Since not all cases of security_kernel_load_data() can have a single
contiguous buffer made available to the LSM hook (e.g. kexec image
segments are separately loaded), there needs to be a way for the LSM to
reason about its expectations of the hook coverage. In order to handle
this, add a "contents" argument to the "kernel_load_data" hook that
indicates if the newly added "kernel_post_load_data" hook will be called
with the full contents once loaded. That way, LSMs requiring full contents
can choose to unilaterally reject "kernel_load_data" with contents=false
(which is effectively the existing hook coverage), but when contents=true
they can allow it and later evaluate the "kernel_post_load_data" hook
once the buffer is loaded.
With this change, LSMs can gain coverage over non-file-backed data loads
(e.g. init_module(2) and firmware userspace helper), which will happen
in subsequent patches.
Additionally prepare IMA to start processing these cases.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/r/20201002173828.2099543-9-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move kernel_read_file* out of linux/fs.h to its own linux/kernel_read_file.h
include file. That header gets pulled in just about everywhere
and doesn't really need functions not related to the general fs interface.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Link: https://lore.kernel.org/r/20200706232309.12010-2-scott.branden@broadcom.com
Link: https://lore.kernel.org/r/20201002173828.2099543-4-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkreqprot data member in selinux_state struct is accessed directly by
SELinux functions to get and set. This could cause unexpected read or
write access to this data member due to compiler optimizations and/or
compiler's reordering of access to this field.
Add helper functions to get and set checkreqprot data member in
selinux_state struct. These helper functions use READ_ONCE and
WRITE_ONCE macros to ensure atomic read or write of memory for
this data member.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Suggested-by: Paul Moore <paul@paul-moore.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Use READ_ONCE/WRITE_ONCE for all accesses to the
selinux_state.policycaps booleans to prevent compiler
mischief.
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Remove the security_policydb_len() calls from sel_open_policy() and
instead update the inode size from the size returned from
security_read_policy().
Since after this change security_policydb_len() is only called from
security_load_policy(), remove it entirely and just open-code it there.
Also, since security_load_policy() is always called with policy_mutex
held, make it dereference the policy pointer directly and drop the
unnecessary RCU locking.
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move the mutex used to synchronize policy changes (reloads and setting
of booleans) from selinux_fs_info to selinux_state and use it in
lockdep checks for rcu_dereference_protected() calls in the security
server functions. This makes the dependency on the mutex explicit
in the code rather than relying on comments.
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
There are a few bugs in the error handling for security_load_policy().
1) If the newpolicy->sidtab allocation fails then it leads to a NULL
dereference. Also the error code was not set to -ENOMEM on that
path.
2) If policydb_read() failed then we call policydb_destroy() twice
which meands we call kvfree(p->sym_val_to_name[i]) twice.
3) If policydb_load_isids() failed then we call sidtab_destroy() twice
and that results in a double free in the sidtab_destroy_tree()
function because entry.ptr_inner and entry.ptr_leaf are not set to
NULL.
One thing that makes this code nice to deal with is that none of the
functions return partially allocated data. In other words, the
policydb_read() either allocates everything successfully or it frees
all the data it allocates. It never returns a mix of allocated and
not allocated data.
I re-wrote this to only free the successfully allocated data which
avoids the double frees. I also re-ordered selinux_policy_free() so
it's in the reverse order of the allocation function.
Fixes: c7c556f1e8 ("selinux: refactor changing booleans")
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[PM: partially merged by hand due to merge fuzz]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Convert the policy read-write lock to RCU. This is significantly
simplified by the earlier work to encapsulate the policy data
structures and refactor the policy load and boolean setting logic.
Move the latest_granting sequence number into the selinux_policy
structure so that it can be updated atomically with the policy.
Since removing the policy rwlock and moving latest_granting reduces
the selinux_ss structure to nothing more than a wrapper around the
selinux_policy pointer, get rid of the extra layer of indirection.
At present this change merely passes a hardcoded 1 to
rcu_dereference_check() in the cases where we know we do not need to
take rcu_read_lock(), with the preceding comment explaining why.
Alternatively we could pass fsi->mutex down from selinuxfs and
apply a lockdep check on it instead.
Based in part on earlier attempts to convert the policy rwlock
to RCU by Kaigai Kohei [1] and by Peter Enderborg [2].
[1] https://lore.kernel.org/selinux/6e2f9128-e191-ebb3-0e87-74bfccb0767f@tycho.nsa.gov/
[2] https://lore.kernel.org/selinux/20180530141104.28569-1-peter.enderborg@sony.com/
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Reviewed-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Drop a repeated word in comments.
{open, is, then}
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Stephen Smalley <stephen.smalley.work@gmail.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: selinux@vger.kernel.org
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
[PM: fix subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This patch adds further attributes to the event. These attributes are
helpful to understand the context of the message and can be used
to filter the events.
There are three common items. Source context, target context and tclass.
There are also items from the outcome of operation performed.
An event is similar to:
<...>-1309 [002] .... 6346.691689: selinux_audited:
requested=0x4000000 denied=0x4000000 audited=0x4000000
result=-13
scontext=system_u:system_r:cupsd_t:s0-s0:c0.c1023
tcontext=system_u:object_r:bin_t:s0 tclass=file
With systems where many denials are occurring, it is useful to apply a
filter. The filtering is a set of logic that is inserted with
the filter file. Example:
echo "tclass==\"file\" " > events/avc/selinux_audited/filter
This adds that we only get tclass=file.
The trace can also have extra properties. Adding the user stack
can be done with
echo 1 > options/userstacktrace
Now the output will be
runcon-1365 [003] .... 6960.955530: selinux_audited:
requested=0x4000000 denied=0x4000000 audited=0x4000000
result=-13
scontext=system_u:system_r:cupsd_t:s0-s0:c0.c1023
tcontext=system_u:object_r:bin_t:s0 tclass=file
runcon-1365 [003] .... 6960.955560: <user stack trace>
=> <00007f325b4ce45b>
=> <00005607093efa57>
Signed-off-by: Peter Enderborg <peter.enderborg@sony.com>
Reviewed-by: Thiébaud Weksteen <tweek@google.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The audit data currently captures which process and which target
is responsible for a denial. There is no data on where exactly in the
process that call occurred. Debugging can be made easier by being able to
reconstruct the unified kernel and userland stack traces [1]. Add a
tracepoint on the SELinux denials which can then be used by userland
(i.e. perf).
Although this patch could manually be added by each OS developer to
trouble shoot a denial, adding it to the kernel streamlines the
developers workflow.
It is possible to use perf for monitoring the event:
# perf record -e avc:selinux_audited -g -a
^C
# perf report -g
[...]
6.40% 6.40% audited=800000 tclass=4
|
__libc_start_main
|
|--4.60%--__GI___ioctl
| entry_SYSCALL_64
| do_syscall_64
| __x64_sys_ioctl
| ksys_ioctl
| binder_ioctl
| binder_set_nice
| can_nice
| capable
| security_capable
| cred_has_capability.isra.0
| slow_avc_audit
| common_lsm_audit
| avc_audit_post_callback
| avc_audit_post_callback
|
It is also possible to use the ftrace interface:
# echo 1 > /sys/kernel/debug/tracing/events/avc/selinux_audited/enable
# cat /sys/kernel/debug/tracing/trace
tracer: nop
entries-in-buffer/entries-written: 1/1 #P:8
[...]
dmesg-3624 [001] 13072.325358: selinux_denied: audited=800000 tclass=4
The tclass value can be mapped to a class by searching
security/selinux/flask.h. The audited value is a bit field of the
permissions described in security/selinux/av_permissions.h for the
corresponding class.
[1] https://source.android.com/devices/tech/debug/native_stack_dump
Signed-off-by: Thiébaud Weksteen <tweek@google.com>
Suggested-by: Joel Fernandes <joelaf@google.com>
Reviewed-by: Peter Enderborg <peter.enderborg@sony.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In order to avoid concurrency issues around selinuxfs resource availability
during policy load, we first create new directories out of tree for
reloaded resources, then swap them in, and finally delete the old versions.
This fix focuses on concurrency in each of the two subtrees swapped, and
not concurrency between the trees. This means that it is still possible
that subsequent reads to eg the booleans directory and the class directory
during a policy load could see the old state for one and the new for the other.
The problem of ensuring that policy loads are fully atomic from the perspective
of userspace is larger than what is dealt with here. This commit focuses on
ensuring that the directories contents always match either the new or the old
policy state from the perspective of userspace.
In the previous implementation, on policy load /sys/fs/selinux is updated
by deleting the previous contents of
/sys/fs/selinux/{class,booleans} and then recreating them. This means
that there is a period of time when the contents of these directories do not
exist which can cause race conditions as userspace relies on them for
information about the policy. In addition, it means that error recovery in
the event of failure is challenging.
In order to demonstrate the race condition that this series fixes, you
can use the following commands:
while true; do cat /sys/fs/selinux/class/service/perms/status
>/dev/null; done &
while true; do load_policy; done;
In the existing code, this will display errors fairly often as the class
lookup fails. (In normal operation from systemd, this would result in a
permission check which would be allowed or denied based on policy settings
around unknown object classes.) After applying this patch series you
should expect to no longer see such error messages.
Signed-off-by: Daniel Burgener <dburgener@linux.microsoft.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Ondrej Mosnacek
Paul Moore
Xin Long
Linus Torvalds
Vivek Goyal
Todd Kjos
Florian Westphal
David S. Miller
Christian Göttsche
Eugene Syromiatnikov
Jakub Kicinski
Xiu Jianfeng
Jeremy Kerr
Roberto Sassu
Austin Kim
Al Viro
Yang Li
Minchan Kim
Jiapeng Chong
Souptick Joarder
Zhongjun Tan
Casey Schaufler
Olga Kornievskaia
Ido Schimmel
Xiong Zhenwu
Lakshmi Ramasubramanian
Christian Brauner
Tycho Andersen
Daniel Colascione
Amir Goldstein
Paolo Abeni
Gustavo A. R. Silva
Chen Zhou
bauen1
Tianyue Ren
Kees Cook
Scott Branden
Stephen Smalley
Dan Carpenter
Randy Dunlap
Peter Enderborg
Thiébaud Weksteen
Daniel Burgener