Граф коммитов

311 Коммитов

Автор SHA1 Сообщение Дата
abdoulaye berthe b4e7c55dab pinctrl: remove all usage of gpio_remove ret val in driver/pinctl
Signed-off-by: abdoulaye berthe <berthe.ab@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-22 16:34:12 +02:00
Himangi Saraogi aef1d0003d sh-pfc: sh73a0: Introduce the use of devm_regulator_register
This patch moves data allocated using regulator_register to
devm_regulator_register and does away the calls to regulator_unregister.
The sh73a0_pinmux_soc_exit function is no longer needed and is removed.

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:39 +02:00
Sergei Shtylyov 0e93867527 sh-pfc: r8a7791: add CAN pin groups
Add CAN0/1 data/clock pin groups to R8A7791 PFC driver.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:36 +02:00
Fan Wu 2243a87d90 pinctrl: avoid duplicated calling enable_pinmux_setting for a pin
What the patch does:
1. Call pinmux_disable_setting ahead of pinmux_enable_setting
  each time pinctrl_select_state is called
2. Remove the HW disable operation in pinmux_disable_setting function.
3. Remove the disable ops in struct pinmux_ops
4. Remove all the disable ops users in current code base.

Notes:
1. Great thanks for the suggestion from Linus, Tony Lindgren and
   Stephen Warren and Everyone that shared comments on this patch.
2. The patch also includes comment fixes from Stephen Warren.

The reason why we do this:
1. To avoid duplicated calling of the enable_setting operation
   without disabling operation inbetween which will let the pin
   descriptor desc->mux_usecount increase monotonously.
2. The HW pin disable operation is not useful for any of the
   existing platforms.
   And this can be used to avoid the HW glitch after using the
   item #1 modification.

In the following case, the issue can be reproduced:
1. There is a driver that need to switch pin state dynamically,
   e.g. between "sleep" and "default" state
2. The pin setting configuration in a DTS node may be like this:

  component a {
	pinctrl-names = "default", "sleep";
	pinctrl-0 = <&a_grp_setting &c_grp_setting>;
	pinctrl-1 = <&b_grp_setting &c_grp_setting>;
  }

  The "c_grp_setting" config node is totally identical, maybe like
  following one:

  c_grp_setting: c_grp_setting {
	pinctrl-single,pins = <GPIO48 AF6>;
  }

3. When switching the pin state in the following official pinctrl
   sequence:
	pin = pinctrl_get();
	state = pinctrl_lookup_state(wanted_state);
	pinctrl_select_state(state);
	pinctrl_put();

Test Result:
1. The switch is completed as expected, that is: the device's
   pin configuration is changed according to the description in the
   "wanted_state" group setting
2. The "desc->mux_usecount" of the corresponding pins in "c_group"
   is increased without being decreased, because the "desc" is for
   each physical pin while the setting is for each setting node
   in the DTS.
   Thus, if the "c_grp_setting" in pinctrl-0 is not disabled ahead
   of enabling "c_grp_setting" in pinctrl-1, the desc->mux_usecount
   will keep increasing without any chance to be decreased.

According to the comments in the original code, only the setting,
in old state but not in new state, will be "disabled" (calling
pinmux_disable_setting), which is correct logic but not intact. We
still need consider case that the setting is in both old state
and new state. We can do this in the following two ways:

1. Avoid to "enable"(calling pinmux_enable_setting) the "same pin
   setting" repeatedly
2. "Disable"(calling pinmux_disable_setting) the "same pin setting",
   actually two setting instances, ahead of enabling them.

Analysis:
1. The solution #2 is better because it can avoid too much
   iteration.
2. If we disable all of the settings in the old state and one of
   the setting(s) exist in the new state, the pins mux function
   change may happen when some SoC vendors defined the
   "pinctrl-single,function-off"
   in their DTS file.
   old_setting => disabled_setting => new_setting.
3. In the pinmux framework, when a pin state is switched, the
   setting in the old state should be marked as "disabled".

Conclusion:
1. To Remove the HW disabling operation to above the glitch mentioned
   above.
2. Handle the issue mentioned above by disabling all of the settings
   in old state and then enable the all of the settings in new state.

Signed-off-by: Fan Wu <fwu@marvell.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:26 +02:00
Nobuhiro Iwamatsu 7d98fd3218 pinctrl: sh-pfc: r8a7791: Add HSCIF pin support
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-11 14:08:23 +02:00
Linus Torvalds bd698cf659 This is the bulk of pin control changes for the v3.16
development cycle:
 
 - Antoine Tenart made the get_group_pins() vtable entry
   optional.
 
 - Antoine also provides an entirely new driver for the
   Marvell Berlin SoC. This is unrelated to the existing
   MVEBU hardware driver and warrants its own separate
   driver.
 
 - Reflected from the GPIO subsystem there is a number of
   refactorings to make pin control drivers with gpiochips
   use the new gpiolib irqchip helpers. The following
   drivers were converted to use the new infrastructure:
 
   - ST Microelectronics STiH416 and friends
 
   - The Atmel AT91
 
   - The CSR SiRF (Prima2)
 
   - The Qualcomm MSM series
 
 - Massive improvements in the Qualcomm MSM driver from
   Bjorn Andersson, Andy Gross and Kumar Gala. Among those
   new support for the IPQ8064 and MSM8x74 SoC variants.
 
 - Support for the Freescale i.MX6 SoloX SoC variant.
 
 - Massive improvements in the Allwinner sunxi driver from
   Boris Brezillon, Maxime Ripard and Chen-Yu Tsai.
 
 - Renesas PFC updates from Laurent Pinchart, Kuninori
   Morimoto, Wolfram Sang and Magnus Damm.
 
 - Cleanups and refactorings of the nVidia Tegra driver from
   Stepgen Warren.
 
 - The Exynos driver now supports the Exynos3250 SoC.
 
 - Intel BayTrail updates from Jin Yao, Mika Westerberg.
 
 - The MVEBU driver now supports the Orion5x SoC
   variants, which is part of the effort of getting rid of
   the old Marvell kludges in arch/arm/mach-orion5x
 
 - Rockchip driver updates from Heiko Stuebner.
 
 - A ton of cleanups and janitorial patches from Axel Lin.
 
 - Some minor fixes and improvements here and there.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTjXDAAAoJEEEQszewGV1z8zsP/i+7o5sU+rm3ZwfpCyuVih7E
 90nHTMzV2Se+8gX4D0jLZUYkxMQn9pkqG616IyT5kP5sx9co8raoAUC1Qmv6b7rI
 kIlfCaDvjPzEWgH9KZNjMP8P0rqdj8TelDRSZ0EPzHdfyUwxFmLRnFo7ywguPCG2
 SOM1uo7XhjXmphoUP7ZZWs3doflYxBAL3ZdK77QQcLEQjlNxSz/vbls6ldkKie7C
 XF7DKvGqphB8GdGKkdFvyhjQNy26rBanZRy94yU53Ak5zc0mTtmO+WEjiByAW1m7
 Fy6AVdZZhl6BLxzn9rUzsKdrWzaWzUkQNilhEO1u7OfZtNQbuYWcv7GJ7h37lIzI
 P0jegOy+7d4JxPyROphtJXx6AwV1pFFimMnWS4rHwUdjwMBVRnlOKQW/G7ulEBsn
 wD5MhD76nHySKtjYquI+iVHbmE06hG8iDUUxFm2saVG8O7Siw+E2aCXPLm9+Lp5R
 fBNuj8lnTy8/F6sHyPs8Bw6u8Ra5uSmRhV4j3B/jZG8pAksqUK6xOmjdVdE7JmoH
 qIZxuQhqrAhjmGkAg/ys5SUuMMbegxTI2f+rDy7rpWonbVOtaItMpgbYwyiQpIR4
 BDmlwZi5BNupiEW7Yzp6utWYIyYA0ntuMGpnqnPBDBCn5jZOCUTMjZXAPCDK5dEN
 Ktyu+5jCBZgpqS+KgTXl
 =wGE5
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl into next

Pull pin control changes from Linus Walleij:
 "This is the bulk of pin control changes for the v3.16 development
  cycle:

   - Antoine Tenart made the get_group_pins() vtable entry optional.

   - Antoine also provides an entirely new driver for the Marvell Berlin
     SoC.  This is unrelated to the existing MVEBU hardware driver and
     warrants its own separate driver.

   - reflected from the GPIO subsystem there is a number of refactorings
     to make pin control drivers with gpiochips use the new gpiolib
     irqchip helpers.  The following drivers were converted to use the
     new infrastructure:
       * ST Microelectronics STiH416 and friends
       * The Atmel AT91
       * The CSR SiRF (Prima2)
       * The Qualcomm MSM series

   - massive improvements in the Qualcomm MSM driver from Bjorn
     Andersson, Andy Gross and Kumar Gala.  Among those new support for
     the IPQ8064 and MSM8x74 SoC variants.

   - support for the Freescale i.MX6 SoloX SoC variant.

   - massive improvements in the Allwinner sunxi driver from Boris
     Brezillon, Maxime Ripard and Chen-Yu Tsai.

   - Renesas PFC updates from Laurent Pinchart, Kuninori Morimoto,
     Wolfram Sang and Magnus Damm.

   - Cleanups and refactorings of the nVidia Tegra driver from Stepgen
     Warren.

   - the Exynos driver now supports the Exynos3250 SoC.

   - Intel BayTrail updates from Jin Yao, Mika Westerberg.

   - the MVEBU driver now supports the Orion5x SoC variants, which is
     part of the effort of getting rid of the old Marvell kludges in
     arch/arm/mach-orion5x

   - Rockchip driver updates from Heiko Stuebner.

   - a ton of cleanups and janitorial patches from Axel Lin.

   - some minor fixes and improvements here and there"

* tag 'pinctrl-v3.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits)
  pinctrl: sirf: fix a bad conflict resolution
  pinctrl: msm: Add more MSM8X74 pin definitions
  pinctrl: qcom: ipq8064: Fix naming convention
  pinctrl: msm: Add missing sdc1 and sdc3 groups
  pinctrl: sirf: switch to using allocated state container
  pinctrl: Enable "power-source" to be extracted from DT files
  pinctrl: sunxi: create irq/pin mapping during init
  pinctrl: pinconf-generic: Use kmemdup instead of kmalloc + memcpy
  pinctrl: berlin: Use devm_ioremap_resource()
  pinctrl: sirf: fix typo for GPIO bank number
  pinctrl: sunxi: depend on RESET_CONTROLLER
  pinctrl: sunxi: fix pin numbers passed to register offset helpers
  pinctrl: add pinctrl driver for imx6sx
  pinctrl/at91: Fix lockup when IRQ on PIOC and PIOD occurs
  pinctrl: msm: switch to using generic GPIO irqchip helpers
  pinctrl: sunxi: Fix multiple registration issue
  pinctrl: sunxi: Fix recursive dependency
  pinctrl: berlin: add the BG2CD pinctrl driver
  pinctrl: berlin: add the BG2 pinctrl driver
  pinctrl: berlin: add the BG2Q pinctrl driver
  ...
2014-06-03 11:20:32 -07:00
Magnus Damm f39d8a72fe pinctrl: sh-pfc: r8a73a4: Allow Multiplatform Build
Add #ifdefs to allow r8a73a4 Multiplatform build. Needed
to enable r8a73a4 Multiplatform support.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-23 00:01:52 +02:00
Magnus Damm 672d323774 pinctrl: sh-pfc: sh73a0: Allow Multiplatform Build
Add #ifdefs to allow sh73a0 Multiplatform build. Needed
to enable sh73a0 Multiplatform support.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-23 00:01:52 +02:00
Magnus Damm b6c996a295 pinctrl: sh-pfc: r8a7740: Allow Multiplatform Build
Add #ifdefs to allow r8a7740 Multiplatform build. Needed
to enable r8a7740 Multiplatform support.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-23 00:01:51 +02:00
Laurent Pinchart 0e26e8dfb9 pinctrl: sh-pfc: Don't set the pinmux_irq irq field for multiplatform
In the multiplatform kernel case the IRQs associated with the PFC GPIOs
are specified through DT. The pinmux_irq irq field is thus ignored by
the code, and doesn't need to be set.

This will allow removing the mach/irq.h include from pfc-*.c files that
was required for the irq_pin() macro used to initialize the irq field.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-05-23 00:01:51 +02:00
Phil Edworthy 0c66c5628b sh-pfc: r8a7791: Fix definition of MOD_SEL3
There is a missing 0 entry from the MOD_SEL3 table.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-23 16:09:53 +02:00
Guido Piasenza 34ce57e9df sh-pfc: r8a7790: Fix definition of IPSR5
The extra entry in the table makes SCIFA0_B, and all
peripherals after it, fail.

Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-23 16:08:23 +02:00
Wolfram Sang a16b81dcbf pinctrl: pfc: r8a7790: add mux data for IIC(B) cores
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22 15:39:41 +02:00
Wolfram Sang 35a493de0d pinctrl: pfc: r8a7790: add i2c0 muxing
Add the muxing for the last missing i2c rcar core. Fix the sorting for
SH_PFC_PIN_NAMED while we are here.

Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22 15:38:23 +02:00
Kuninori Morimoto c57a05b0eb sh-pfc: r8a7791: Add Audio pin support
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22 15:09:29 +02:00
Kuninori Morimoto b664cd1f02 sh-pfc: r8a7791: Add SSI pin support
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22 15:08:16 +02:00
Laurent Pinchart d10046e25c pinctrl: sh-pfc: r8a7791: Split the DU sync and cde/disp groups
The DU parallel interface ODDF signal is optional, move it out of the
HSYNC/VSYNC group into a group of its down. The CDE and DISP signals are
independent, split them to two different groups.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-04-22 08:41:35 +02:00
Linus Torvalds d64b393253 Pin control bulk changes for the v3.15 series, no new core
functionality this time, just incremental driver updates:
 
 - A large refactoring of the MVEBU (Marvell) driver.
 
 - A large refactoring of the Tegra (nVidia) driver.
 
 - GPIO interrupt including soft edges support in the
   STi driver.
 
 - Misc updates to PFC (Renesas), AT91, ADI2 (Blackfin),
   pinctrl-single, sirf (CSR), msm (Qualcomm), Exynos (Samsung),
   sunxi (AllWinner), i.MX (Freescale), Baytrail.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTORWVAAoJEEEQszewGV1zkCgP/3CxgHSqwAN5ps1IxRhOThgQ
 UClm2EETW9hca7okOdCLgngEYJEtetQ0atAW9yJS6bwK9KP3zhQXVXFBS9ecO3Z4
 U8U6UuKWiBLxZjmaPS6NvSxAY61Co60aoTow67zxrVhnwF/a8Cl7E4y+jD/Q/bmk
 +NM5B9puRYO2kPhjfr9VwIsQamjyCN8uXXI1r5YSR/ti1IbX78DDlz4+fyBfYX5f
 h95B8+kfDzygHIHpuLs3zJiRnKw/Q5G/PbDHyA2TgpL2Z8/Lyv6hvMWZ1O1qFOXi
 SDkyCv0ocXgVlYn6CT7k9s6/q2TVmD7hjiiLHAYebZcBg3NbF3/ApUYzNTAdp7eu
 FuuBPk4wCCvwxs0PFKNWQHzlCvr0WEbZNmUmKFzUOKoZMsl//lsm0l5v0IYJBs1w
 iB/ruetNVLlq9jhMCcmgesSn5JRxOW9jhU/N2VIMSu/L8nIFeTbok8iL3abTEglg
 gE1odnZf6lDsrcuq7VkGq6xXbevxz/pJVG604Y2vNvqvdDbQA9e1F9X+Ggh1gZTb
 Fnb0B7D42LlT5SDSzsxMciOvVAZ5PzRnsDvjIqEs+xp22IiLHQ+fK09AO76DgVy9
 oxb897mc2Oa3BbjJBE/Dkk2QjGlq0vHNf7Mm3W+nerGS5o0C78x7KwEWH7/X5ICd
 szzkXNdY7V8DMMzrsDOe
 =i7Sq
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control bulk changes from Linus Walleij:
 "Pin control bulk changes for the v3.15 series, no new core
  functionality this time, just incremental driver updates:

   - A large refactoring of the MVEBU (Marvell) driver.

   - A large refactoring of the Tegra (nVidia) driver.

   - GPIO interrupt including soft edges support in the STi driver.

   - Misc updates to PFC (Renesas), AT91, ADI2 (Blackfin),
     pinctrl-single, sirf (CSR), msm (Qualcomm), Exynos (Samsung), sunxi
     (AllWinner), i.MX (Freescale), Baytrail"

* tag 'pinctrl-v3.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
  pinctrl: tegra: add some missing Tegra114 entries
  pinctrl: tegra: fix some mistakes in Tegra124
  pinctrl: msm: fix up out-of-order merge conflict
  pinctrl: st: Fix error check for of_irq_to_resource usage
  pinctrl: tegra: consistency cleanup
  pinctrl: tegra: dynamically calculate function list of groups
  pinctrl: tegra: init Tegra20/30 at module_init time
  pinctrl: st: Use ARRAY_SIZE instead of raw value for number of delays
  pinctrl: st: add pinctrl support for the STiH407 SoC
  pinctrl: st: Enhance the controller to manage unavailable registers
  pinctrl: msm: Simplify msm_config_reg() and callers
  pinctrl: msm: Remove impossible WARN_ON()s
  pinctrl: msm: Replace lookup tables with math
  pinctrl: msm: Drop OF_IRQ dependency
  pinctrl: msm: Drop unused includes
  pinctrl: msm: Check for ngpios > MAX_NR_GPIO
  pinctrl: msm: Silence recursive lockdep warning
  pinctrl: mvebu: silence WARN to dev_warn
  pinctrl: msm: drop wake_irqs bitmap
  pinctrl-baytrail: add function mux checking in gpio pin request
  ...
2014-04-01 13:10:49 -07:00
Magnus Damm b5973fcd76 pinctrl: sh-pfc: r8a7791: SD1_CLK fix
Fix the SD1_CLK handling for r8a7791. Without this patch
it is impossible to request all pins needed for SDHI1 on
the Koelsch board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05 09:57:47 +08:00
Geert Uytterhoeven e6fae2d03d pinctrl: sh-pfc: r8a7791: Add alternative MSIOF pin groups
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05 09:53:49 +08:00
Geert Uytterhoeven 7033168da5 pinctrl: sh-pfc: r8a7790: Add alternative MSIOF pin groups
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-05 09:15:30 +08:00
Wolfram Sang 6787141361 pinctrl: pfc: r8a7791: add mux data for IIC(B) cores
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 10:49:15 +01:00
Geert Uytterhoeven 202909cdf1 pinctrl: sh-pfc: r8a7790: Add QSPI pin groups
A QSPI function set consists of 3 groups:
  - qspi_ctrl (2 control wires)
  - qspi_data2 (2 data wires, for Single/Dual SPI)
  - qspi_data4 (4 data wires, for Quad SPI)

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-25 10:49:11 +01:00
Magnus Damm 97e00faaf1 pinctrl: sh-pfc: r8a7790: Break out USB0 OVC/VBUS
Create a new group for the USB0 OVC/VBUS pin by itself. This
allows us to monitor PWEN as GPIO on the Lager board.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-02-11 09:35:19 +01:00
Geert Uytterhoeven 2d0c386f13 pinctrl: sh-pfc: r8a7791: Add QSPI pin groups
A QSPI function set consists of 3 groups:
  - qspi_ctrl (2 control wires)
  - qspi_data2 (2 data wires, for Single/Dual SPI)
  - qspi_data4 (4 data wires, for Quad SPI)

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2014-02-10 10:13:07 +01:00
Linus Torvalds a547df99aa Bulk pin control changes for the v3.14 cycle:
- New driver for the Qualcomm TLMM pin controller and its
   msm8x74 subdriver.
 
 - New driver for the Broadcom Capri BCM281xx SoC.
 
 - New subdriver for the imx25 pin controller.
 
 - New subdriver for the Tegra124 pin controller.
 
 - Lock GPIO lines as IRQs for select combined pin control and
   GPIO drivers for baytrail and sirf.
 
 - Some semi-big refactorings and extenstions to the sirf
   driver.
 
 - Lots of patching, cleanup and fixing in the Renesas "PFC"
   driver and associated subdrivers as usual. It is settling
   down a little bit now it seems.
 
 - Minor fixes and incremental updates here and there as usual.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJS3mvwAAoJEEEQszewGV1zc3wP/RYjFaS4WGXX/QnvXGlTwpyb
 3IIQM4l507ds97ipjip9OO31od8HqkWw4lREwKvRdtqItZJiSzG3oYwn+ro+X2E5
 tif0kDxae1tFWieVjA2+zuvjZ76ve8FsVUuUTY7qdd4jdD3OO6P9BgDT0QqwN1Uh
 QToszugQzeOqJARn/DKHg2hkBlg0NorasskCvy6qALbXkWIpLm0U4di2HmGgvV2e
 5YqRCA8uAf48fE6Q93PQNYQU7Zux1Lyr59y0Wl/pnfKKvi1qG2KPnHDJhMmUbxJk
 tWi2VcB1Msrhccv+o0onNMfILG0xInmss3NELTTJJEhSjDvaETkng9fCbw4XDaKY
 KLQ7aRjodbGlvdAONqzZR6e0Ra+piGKDdm94+hvOn0BS1SVfjVA7d6AaeTdR6g+6
 GD+EVqzczAtla8g1xwNKp69SDN1I3yddMQzjQProSE/eGaQYN6aJW+2hDpD3SoOD
 uezFyktzehCIJ5WOIcth8RapN7p33w7bbDOuGVESCesF4NcaUqF+19ukAN9kzVhd
 6oksU1RsxLUdBg/zO7Dwyuhx0XzOuBvrP3EADU37MpnTyCGz4ko4vH0T7JHaA5Oe
 lN9otYBZT0p/kYUEdINjF3foc7f2yc8adC5kDUB9p/zdzyPIwCijGGD6shJGr11/
 7SQ8DvyJZeq3lSNs8+RG
 =ol2E
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull bulk pin control changes from Linus Walleij:
 "This has been queued and tested for a while.  Lots of action here,
  like in the GPIO tree, embedded stuff like this is really hot now it
  seems.  Details in the signed tag.  I'm especially happy about the
  Qualcomm driver as it is used in such a huge subset of mobile handsets
  out there, and these platforms in general need better upstream support

   - New driver for the Qualcomm TLMM pin controller and its msm8x74
     subdriver.

   - New driver for the Broadcom Capri BCM281xx SoC.

   - New subdriver for the imx25 pin controller.

   - New subdriver for the Tegra124 pin controller.

   - Lock GPIO lines as IRQs for select combined pin control and GPIO
     drivers for baytrail and sirf.

   - Some semi-big refactorings and extenstions to the sirf driver.

   - Lots of patching, cleanup and fixing in the Renesas "PFC" driver
     and associated subdrivers as usual.  It is settling down a little
     bit now it seems.

   - Minor fixes and incremental updates here and there as usual"

* tag 'pinctrl-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
  pinctrl: sunxi: Honor GPIO output initial vaules
  pinctrl: capri: add dependency on OF
  ARM: bcm11351: Enable pinctrl for Broadcom Capri SoCs
  ARM: pinctrl: Add Broadcom Capri pinctrl driver
  pinctrl: Add pinctrl binding for Broadcom Capri SoCs
  pinctrl: Add void * to pinctrl_pin_desc
  pinctrl: st: Fix a typo in probe
  pinctrl: Fix some typos and grammar issues in the documentation
  pinctrl: sirf: lock IRQs when starting them
  pinctrl: sirf: put gpio interrupt pin into input status automatically
  pinctrl: sirf: use only one irq_domain for the whole device node
  pinctrl: single: fix infinite loop caused by bad mask
  pinctrl: single: fix pcs_disable with bits_per_mux
  pinctrl: single: fix DT bindings documentation
  pinctrl: as3722: Set pin to output mode for some function
  pinctrl: sirf: add pin group for USP0 with only RX or TX frame sync
  pinctrl: sirf: fix the pins of sdmmc5 connected with TriG
  pinctrl: sirf: add lost usp1_uart_nostreamctrl group for atlas6
  pinctrl: sunxi: Add Allwinner A20 clock output pin functions
  pinctrl/lantiq: fix typo
  ...
2014-01-21 10:14:10 -08:00
Valentine Barshak a5ffaf6445 pinctrl: sh-pfc: r8a7791: Add I2C pins
This adds I2C[0-4] pinmux support to R8A7791 SoC.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07 16:48:54 +01:00
Valentine Barshak 8e32c9671f pinctrl: sh-pfc: r8a7791: Add VIN pins
This adds VIN[0-2] pinmux support to r8a7791 SoC.
VIN1 B mirror is also added along with the primary
configuration since it's the only one that provides
access to all 24 data bits on VIN1.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07 16:48:50 +01:00
Valentine Barshak 5e5a298cdb pinctrl: sh-pfc: r8a7791: Group USB PWEN and OVC pins together
This groups USB PWEN and OVC pins together on R8A7791 SoC,
the same way it's done on R8A7790, since both are needed
for a USB device.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07 16:48:46 +01:00
Valentine Barshak 646ae3ef7e pinctrl: sh-pfc: r8a7790: Fix vsync value in the vin3_sync_mux array
This fixes a typo in the vin3_sync_mux array (s/VI2/VI3/).

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-07 16:48:35 +01:00
Laurent Pinchart 44a45b55a7 pinctrl: sh-pfc: ARM: Constify pins and cfg_regs arrays
The arrays are never modified, declare them as const.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20 12:28:40 +01:00
Laurent Pinchart f41a1efe63 pinctrl: sh-pfc: sh: Constify pins and cfg_regs arrays
The arrays are never modified, declare them as const.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20 12:27:43 +01:00
Laurent Pinchart 6d5bddd525 pinctrl: sh-pfc: Constify IRQ GPIOs arrays
The arrays are never modified, make them const.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20 12:26:54 +01:00
Laurent Pinchart 9aecff583e pinctrl: sh-pfc: Constify enum_ids and var_field_width compound literals
The enum_ids and var_field_width fields of struct pinmux_data_reg and
pinmux_cfg_reg are initialized using compound literals. Cast them to
const to store them in .rodata.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-20 12:25:59 +01:00
Laurent Pinchart 70c8f01a35 sh-pfc: Support GPIO to IRQ mapping specified IRQ resources
On non-DT platforms IRQ controllers associated with the GPIOs have a
fixed IRQ base value known at compile time. The sh-pfc driver translates
GPIO number to IRQ numbers using a hardcoded table. This mechanism
breaks on DT platforms, as the IRQ base values are dynamic in that case.

Fix this by specifying IRQs associated with GPIOs in IRQ resources,
populated automatically from the device tree. When IRQ resources are
specified the driver requires one IRQ resource per GPIO able to generate
an interrupt, and uses the translation table to compute the IRQ resource
offset instead of the IRQ number.

Cc: devicetree@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12 22:07:28 +01:00
Laurent Pinchart 5b46ac3a77 sh-pfc: Rename sh_pfc window field to windows
There's more than one window, name the field windows.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12 22:07:23 +01:00
Laurent Pinchart de55c71feb sh-pfc: sh73a0: Sort IRQ entries by IRQ number
This makes catching duplicate entries easier. Merge the two IRQ9 entries
found after sorting.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12 22:07:18 +01:00
Laurent Pinchart c48ca30341 sh-pfc: sh73a0: Add missing IRQ15
The external IRQ15 input multiplexed on GPIO 0 is missing. Add it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12 22:07:12 +01:00
Laurent Pinchart 316b255001 sh-pfc: Terminate gpios array by -1
0 is a valid GPIO value, use -1 to terminate the gpios array in IRQ
lists.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12 22:07:06 +01:00
Laurent Pinchart 8d72a7fc8d sh-pfc: Turn unsigned indices into unsigned int
Some indices take positive values only, make them unsigned.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-12 22:06:49 +01:00
Valentine Barshak 054d425909 pinctrl: sh-pfc: pfc-r8a7790: Add VIN2 and VIN3 pins
There are VIN2 and VIN3 channels available on the R8A7790 SoC.
VIN2 supports 4/8/16/18/24-bit data, while VIN3 supports 8-bit.
Add both here, covering all possible data pin configurations.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10 20:42:39 +01:00
Valentine Barshak 317a03a9cb pinctrl: sh-pfc: pfc-r8a7790: Add missing VIN1 pins
Both VIN0 and VIN1 channels support identical input interfaces.
Add missing VIN1 pins here and organize them in the same pin
groups as VIN0.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10 20:42:36 +01:00
Valentine Barshak 64fe8abc73 pinctrl: sh-pfc: pfc-r8a7790: Reorganize VIN0 data pins
This reorganizes and renames VIN0 data pin groups to cover
all possible configurations. There's total of eight data
pin groups, one per each configuration. Most of the groups
share the same pin/mux array. Only the 18-bit configuration
needs a separate pin/mux array since in combines interleaved
data pins.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10 20:42:33 +01:00
Valentine Barshak a9e4c7bb46 pinctrl: sh-pfc: pfc-r8a7790: Group VIN0 HSYNC and VSYNC together
This groups VIN0 HSYNC and VSYNC pins together
since one cannot be used without another.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10 20:42:30 +01:00
Valentine Barshak 7a57be873a pinctrl: sh-pfc: pfc-r8a7790: Rename VIN pin groups
This drops superfluous "signal" word from the pin group names
and renames data_enable group to clkenb as in the h/w manual.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2013-12-10 20:42:16 +01:00
Takashi Yoshii 2ef3967ef5 sh-pfc: r8a7791: Fix msiof groups to follow GROUP
SH_PFC_PIN_GROUP(), pins[], mux[], defines
 clk, sync, ss1, ss2, rx, tx
But, msiof?_groups[] defines
 clk, ctrl, data

Fix msiof[012]_groups members to be consistent to PIN_GROUP.

Signed-off-by: Takashi Yoshii <takasi-y@ops.dti.ne.jp>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-12-10 16:22:55 +01:00
Kuninori Morimoto fcec5b2254 sh-pfc: r8a7790: Add Audio pin support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-12-10 16:22:54 +01:00
Kuninori Morimoto 1d7b59a077 sh-pfc: r8a7790: Add SSI pin support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2013-12-10 16:22:54 +01:00
Laurent Pinchart 3f9c126815 sh-pfc: Share common PORTCR macro definition
The macro is defined identically in four different locations. Share it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-10 16:18:08 +01:00
Laurent Pinchart 8620f394c4 sh-pfc: Fix PINMUX_GPIO macro
Commit 7cbb0e55e2 ("sh-pfc: Don't duplicate argument to PINMUX_GPIO
macro") erronesouly modified the PINMUX_GPIO macro in a way that
resulted in all pins being named "name". Fix the macro to name the pins
correctly.

Cc: stable@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-12-10 13:12:28 +01:00