A previous change amended try_to_freeze_tasks() with the "what"
variable pointing to a string describing the group of tasks subject to
the freezing which may be used in the error message in there too, so
make that happen.
Accordingly, update sleepgraph.py to catch the modified error message
as appropriate.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Using pr_cont() in the tasks freezing code related to system-wide
suspend and hibernation is problematic, because the continuation
messages printed there are susceptible to interspersing with other
unrelated messages which results in output that is hard to
understand.
Address this issue by modifying try_to_freeze_tasks() to print
messages that don't require continuations and adjusting its
callers accordingly.
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
The system memory map can change over a hibernation-restore cycle due
to a defect in the platform firmware, and some of the page frames used
by the kernel before hibernation may not be available any more during
the subsequent restore which leads to the error below.
[ T357] PM: Image loading progress: 0%
[ T357] PM: Read 2681596 kbytes in 0.03 seconds (89386.53 MB/s)
[ T357] PM: Error -14 resuming
[ T357] PM: Failed to load hibernation image, recovering.
[ T357] PM: Basic memory bitmaps freed
[ T357] OOM killer enabled.
[ T357] Restarting tasks ... done.
[ T357] PM: resume from hibernation failed (-14)
[ T357] PM: Hibernation image not present or could not be loaded.
Add an error message to the unpack() function to allow problematic
page frames to be identified and the source of the problem to be
diagnosed more easily. This can save developers quite a bit of
debugging time.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
[ rjw: New subject, edited changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The actual maximum image size formula in hibernate_preallocate_memory()
is as follows:
max_size = (count - (size + PAGES_FOR_IO)) / 2
- 2 * DIV_ROUND_UP(reserved_size, PAGE_SIZE);
but the one in the kerneldoc comment of the function is different and
incorrect.
Fixes: ddeb648708 ("PM / Hibernate: Add sysfs knob to control size of memory for drivers")
Signed-off-by: xiongxin <xiongxin@kylinos.cn>
[ rjw: Subject and changelog rewrite ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Hybrid sleep is currently hardcoded to only operate with S3 even
on systems that might not support it.
Instead of assuming this mode is what the user wants to use, for
hybrid sleep follow the setting of `mem_sleep_current` which
will respect mem_sleep_default kernel command line and policy
decisions made by the presence of the FADT low power idle bit.
Fixes: 81d45bdf89 ("PM / hibernate: Untangle power_down()")
Reported-and-tested-by: kolAflash <kolAflash@kolahilft.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216574
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
- Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
- Freezer:
- Rewrite the core freezer to behave better wrt thawing and be simpler
in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting
all the fallout.
- Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
- Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KjMD
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
Freezer:
- Rewrite the core freezer to behave better wrt thawing and be
simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
fixing/adjusting all the fallout.
Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() &
replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications"
* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
sched: Fix more TASK_state comparisons
sched: Fix TASK_state comparisons
sched/fair: Move call to list_last_entry() in detach_tasks
sched/fair: Cleanup loop_max and loop_break
sched/fair: Make sure to try to detach at least one movable task
sched: Show PF_flag holes
freezer,sched: Rewrite core freezer logic
sched: Widen TAKS_state literals
sched/wait: Add wait_event_state()
sched/completion: Add wait_for_completion_state()
sched: Add TASK_ANY for wait_task_inactive()
sched: Change wait_task_inactive()s match_state
freezer,umh: Clean up freezer/initrd interaction
freezer: Have {,un}lock_system_sleep() save/restore flags
sched: Rename task_running() to task_on_cpu()
sched/fair: Cleanup for SIS_PROP
sched/fair: Default to false in test_idle_cores()
sched/fair: Remove useless check in select_idle_core()
sched/fair: Avoid double search on same cpu
sched/fair: Remove redundant check in select_idle_smt()
...
On some platforms it is found that Linux more aggressively enters s2idle
than Windows enters Modern Standby and this uncovers some synchronization
issues for the platform. To aid in debugging this class of problems in
the future, add support for an extra optional callback intended for
drivers to emit extra debugging.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220829162953.5947-2-mario.limonciello@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rewrite the core freezer to behave better wrt thawing and be simpler
in general.
By replacing PF_FROZEN with TASK_FROZEN, a special block state, it is
ensured frozen tasks stay frozen until thawed and don't randomly wake
up early, as is currently possible.
As such, it does away with PF_FROZEN and PF_FREEZER_SKIP, freeing up
two PF_flags (yay!).
Specifically; the current scheme works a little like:
freezer_do_not_count();
schedule();
freezer_count();
And either the task is blocked, or it lands in try_to_freezer()
through freezer_count(). Now, when it is blocked, the freezer
considers it frozen and continues.
However, on thawing, once pm_freezing is cleared, freezer_count()
stops working, and any random/spurious wakeup will let a task run
before its time.
That is, thawing tries to thaw things in explicit order; kernel
threads and workqueues before doing bringing SMP back before userspace
etc.. However due to the above mentioned races it is entirely possible
for userspace tasks to thaw (by accident) before SMP is back.
This can be a fatal problem in asymmetric ISA architectures (eg ARMv9)
where the userspace task requires a special CPU to run.
As said; replace this with a special task state TASK_FROZEN and add
the following state transitions:
TASK_FREEZABLE -> TASK_FROZEN
__TASK_STOPPED -> TASK_FROZEN
__TASK_TRACED -> TASK_FROZEN
The new TASK_FREEZABLE can be set on any state part of TASK_NORMAL
(IOW. TASK_INTERRUPTIBLE and TASK_UNINTERRUPTIBLE) -- any such state
is already required to deal with spurious wakeups and the freezer
causes one such when thawing the task (since the original state is
lost).
The special __TASK_{STOPPED,TRACED} states *can* be restored since
their canonical state is in ->jobctl.
With this, frozen tasks need an explicit TASK_FROZEN wakeup and are
free of undue (early / spurious) wakeups.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114649.055452969@infradead.org
Rafael explained that the reason for having both PF_NOFREEZE and
PF_FREEZER_SKIP is that {,un}lock_system_sleep() is callable from
kthread context that has previously called set_freezable().
In preparation of merging the flags, have {,un}lock_system_slee() save
and restore current->flags.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114648.725003428@infradead.org
Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps
much like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
Full details are in the long shortlog contents.
All of these have been in linux-next for a while without any reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYup9QQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylBKQCfaSuzl9ZP9dTvAw2FPp14oRqXnpoAnicvWAoq
1vU9Vtq2c73uBVLdZm4m
=AwP3
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmLko3gQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpmQaD/90NKFj4v8I456TUQyg1jimXEsL+e84E6o2
ALWVb6JzQvlPVQXNLnK5YKIunMWOTtTMz0nyB8sVRwVJVJO0P5d7QopAkZM8fkyU
MK5OCzoryENw4DTc2wJS4in6cSbGylIuN74wMzlf7+M67JTImfoZQhbTMcjwzZfn
b3OlL6sID7zMXwGcuOJPZyUJICCpDhzdSF9JXqKma5PQuG2SBmQyvFxJAcsoFBPc
YetnoRIOIN6yBvsIZaPaYq7XI9MIvF0e67EQtyCEHj4tHpyVnyDWkeObVFULsISU
gGEKbkYPvNUzRAU5Q1NBBHh1tTfkf/MaUxTuZwoEwZ/s04IGBGMmrZGyfvdfzYo6
M7NwSEg/TrUSNfTwn65mQi7uOXu1pGkJrqz84Flm8u9Qid9Vd7LExLG5p/ggnWdH
5th93MDEmtEg29e9DXpEAuS5d0t3TtSvosflaKpyfNNfr+P0rWCN6GM/uW62VUTK
ls69SQh/AQJRbg64jU4xper6WhaYtSXK7TKEnxJycoEn9gYNyCcdot2uekth0xRH
ChHGmRlteiqe/y4uFWn/2dcxWjoleiHbFjTaiRL75WVl8wIDEjw02LGuoZ61Ss9H
WOV+MT7KqNjBGe6lreUY+O/PO02dzmoR6heJXN19p8zr/pBuLCTGX7UpO7rzgaBR
4N1HEozvIw==
=celk
-----END PGP SIGNATURE-----
Merge tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- Improve the type checking of request flags (Bart)
- Ensure queue mapping for a single queues always picks the right queue
(Bart)
- Sanitize the io priority handling (Jan)
- rq-qos race fix (Jinke)
- Reserved tags handling improvements (John)
- Separate memory alignment from file/disk offset aligment for O_DIRECT
(Keith)
- Add new ublk driver, userspace block driver using io_uring for
communication with the userspace backend (Ming)
- Use try_cmpxchg() to cleanup the code in various spots (Uros)
- Finally remove bdevname() (Christoph)
- Clean up the zoned device handling (Christoph)
- Clean up independent access range support (Christoph)
- Clean up and improve block sysfs handling (Christoph)
- Clean up and improve teardown of block devices.
This turns the usual two step process into something that is simpler
to implement and handle in block drivers (Christoph)
- Clean up chunk size handling (Christoph)
- Misc cleanups and fixes (Bart, Bo, Dan, GuoYong, Jason, Keith, Liu,
Ming, Sebastian, Yang, Ying)
* tag 'for-5.20/block-2022-07-29' of git://git.kernel.dk/linux-block: (178 commits)
ublk_drv: fix double shift bug
ublk_drv: make sure that correct flags(features) returned to userspace
ublk_drv: fix error handling of ublk_add_dev
ublk_drv: fix lockdep warning
block: remove __blk_get_queue
block: call blk_mq_exit_queue from disk_release for never added disks
blk-mq: fix error handling in __blk_mq_alloc_disk
ublk: defer disk allocation
ublk: rewrite ublk_ctrl_get_queue_affinity to not rely on hctx->cpumask
ublk: fold __ublk_create_dev into ublk_ctrl_add_dev
ublk: cleanup ublk_ctrl_uring_cmd
ublk: simplify ublk_ch_open and ublk_ch_release
ublk: remove the empty open and release block device operations
ublk: remove UBLK_IO_F_PREFLUSH
ublk: add a MAINTAINERS entry
block: don't allow the same type rq_qos add more than once
mmc: fix disk/queue leak in case of adding disk failure
ublk_drv: fix an IS_ERR() vs NULL check
ublk: remove UBLK_IO_F_INTEGRITY
ublk_drv: remove unneeded semicolon
...
Merge devfreq changes, PM QoS change, and power management tools and
documentation changes for v5.20-rc1:
- Add new devfreq driver for Mediatek CCI (Cache Coherent
Interconnect) (Johnson Wang).
- Convert the Samsung Exynos SoC Bus bindings to DT schema of
exynos-bus.c (Krzysztof Kozlowski).
- Address kernel-doc warnings by adding the description for unused
fucntion parameters in devfreq core (Mauro Carvalho Chehab).
- Use NULL to pass a null pointer rather than zero according to the
function propotype in imx-bus.c (Colin Ian King).
- Print error message instead of error interger value in
tegra30-devfreq.c (Dmitry Osipenko).
- Add checks to prevent setting negative frequency QoS limits for
CPUs (Shivnandan Kumar).
- Update the pm-graph suite of utilities to the latest revision 5.9
including multiple improvements (Todd Brandt).
- Drop pme_interrupt reference from the PCI power management
documentation (Mario Limonciello).
* pm-devfreq:
PM / devfreq: tegra30: Add error message for devm_devfreq_add_device()
PM / devfreq: imx-bus: use NULL to pass a null pointer rather than zero
PM / devfreq: shut up kernel-doc warnings
dt-bindings: interconnect: samsung,exynos-bus: convert to dtschema
PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver
dt-bindings: interconnect: Add MediaTek CCI dt-bindings
* pm-qos:
PM: QoS: Add check to make sure CPU freq is non-negative
* pm-tools:
pm-graph v5.9
* pm-docs:
Documentation: PM: Drop pme_interrupt reference
Merge core device power management changes for v5.20-rc1:
- Extend support for wakeirq to callback wrappers used during system
suspend and resume (Ulf Hansson).
- Defer waiting for device probe before loading a hibernation image
till the first actual device access to avoid possible deadlocks
reported by syzbot (Tetsuo Handa).
- Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
Helgaas).
- Add Raptor Lake-P to the list of processors supported by the Intel
RAPL driver (George D Sworo).
- Add Alder Lake-N and Raptor Lake-P to the list of processors for
which Power Limit4 is supported in the Intel RAPL driver (Sumeet
Pawnikar).
- Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
attempting to remove it (Hsin-Yi Wang).
- Change the Energy Model code to represent power in micro-Watts and
adjust its users accordingly (Lukasz Luba).
* pm-core:
PM: runtime: Extend support for wakeirq for force_suspend|resume
* pm-sleep:
PM: hibernate: defer device probing when resuming from hibernation
PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP
* powercap:
powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
powercap: intel_rapl: Add support for RAPTORLAKE_P
* pm-domains:
PM: domains: Ensure genpd_debugfs_dir exists before remove
* pm-em:
cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
firmware: arm_scmi: Get detailed power scale from perf
Documentation: EM: Switch to micro-Watts scale
PM: EM: convert power field to micro-Watts precision and align drivers
CPU frequency should never be negative.
If some client driver calls freq_qos_update_request with a
negative value which will be very high in absolute terms,
then frequency QoS sets max CPU freq at fmax as it considers
it's absolute value but it will add plist node with negative
priority.
plist node has priority from INT_MIN (highest) to INT_MAX(lowest).
Once priority is set as negative, another client will not be able
to reduce CPU frequency.
Adding check to make sure CPU freq is non-negative will fix
this problem.
Signed-off-by: Shivnandan Kumar <quic_kshivnan@quicinc.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
syzbot is reporting hung task at misc_open() [1], for there is a race
window of AB-BA deadlock which involves probe_count variable. Currently
wait_for_device_probe() from snapshot_open() from misc_open() can sleep
forever with misc_mtx held if probe_count cannot become 0.
When a device is probed by hub_event() work function, probe_count is
incremented before the probe function starts, and probe_count is
decremented after the probe function completed.
There are three cases that can prevent probe_count from dropping to 0.
(a) A device being probed stopped responding (i.e. broken/malicious
hardware).
(b) A process emulating a USB device using /dev/raw-gadget interface
stopped responding for some reason.
(c) New device probe requests keeps coming in before existing device
probe requests complete.
The phenomenon syzbot is reporting is (b). A process which is holding
system_transition_mutex and misc_mtx is waiting for probe_count to become
0 inside wait_for_device_probe(), but the probe function which is called
from hub_event() work function is waiting for the processes which are
blocked at mutex_lock(&misc_mtx) to respond via /dev/raw-gadget interface.
This patch mitigates (b) by deferring wait_for_device_probe() from
snapshot_open() to snapshot_write() and snapshot_ioctl(). Please note that
the possibility of (b) remains as long as any thread which is emulating a
USB device via /dev/raw-gadget interface can be blocked by uninterruptible
blocking operations (e.g. mutex_lock()).
Please also note that (a) and (c) are not addressed. Regarding (c), we
should change the code to wait for only one device which contains the
image for resuming from hibernation. I don't know how to address (a), for
use of timeout for wait_for_device_probe() might result in loss of user
data in the image. Maybe we should require the userland to wait for the
image device before opening /dev/snapshot interface.
Link: https://syzkaller.appspot.com/bug?extid=358c9ab4c93da7b7238c [1]
Reported-by: syzbot <syzbot+358c9ab4c93da7b7238c@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot <syzbot+358c9ab4c93da7b7238c@syzkaller.appspotmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The milli-Watts precision causes rounding errors while calculating
efficiency cost for each OPP. This is especially visible in the 'simple'
Energy Model (EM), where the power for each OPP is provided from OPP
framework. This can cause some OPPs to be marked inefficient, while
using micro-Watts precision that might not happen.
Update all EM users which access 'power' field and assume the value is
in milli-Watts.
Solve also an issue with potential overflow in calculation of energy
estimation on 32bit machine. It's needed now since the power value
(thus the 'cost' as well) are higher.
Example calculation which shows the rounding error and impact:
power = 'dyn-power-coeff' * volt_mV * volt_mV * freq_MHz
power_a_uW = (100 * 600mW * 600mW * 500MHz) / 10^6 = 18000
power_a_mW = (100 * 600mW * 600mW * 500MHz) / 10^9 = 18
power_b_uW = (100 * 605mW * 605mW * 600MHz) / 10^6 = 21961
power_b_mW = (100 * 605mW * 605mW * 600MHz) / 10^9 = 21
max_freq = 2000MHz
cost_a_mW = 18 * 2000MHz/500MHz = 72
cost_a_uW = 18000 * 2000MHz/500MHz = 72000
cost_b_mW = 21 * 2000MHz/600MHz = 70 // <- artificially better
cost_b_uW = 21961 * 2000MHz/600MHz = 73203
The 'cost_b_mW' (which is based on old milli-Watts) is misleadingly
better that the 'cost_b_uW' (this patch uses micro-Watts) and such
would have impact on the 'inefficient OPPs' information in the Cpufreq
framework. This patch set removes the rounding issue.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Improve static type checking by using the enum req_op type for variables
that represent a request operation and the new blk_opf_t type for
variables that represent request flags. Combine the first two
hib_submit_io() arguments into a single argument.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20220714180729.1065367-62-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Systems that initiate frequent suspend/resume from userspace
can make the kernel aware by enabling PM_USERSPACE_AUTOSLEEP
config.
This allows for certain sleep-sensitive code (wireguard/rng) to
decide on what preparatory work should be performed (or not) in
their pm_notification callbacks.
This patch was prompted by the discussion at [1] which attempts
to remove CONFIG_ANDROID that currently guards these code paths.
[1] https://lore.kernel.org/r/20220629150102.1582425-1-hch@lst.de/
Suggested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Link: https://lore.kernel.org/r/20220630191230.235306-1-kaleshsingh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use new kernel_can_power_off() API instead of legacy pm_power_off global
variable to fix regressed hibernation to disk where machine no longer
powers off when it should because ACPI power driver transitioned to the
new sys-off based API and it doesn't use pm_power_off anymore.
Fixes: 98f30d0ecf ("ACPI: power: Switch to sys-off handler API")
Tested-by: Ken Moffat <zarniwhoop@ntlworld.com>
Reported-by: Ken Moffat <zarniwhhop@ntlworld.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously hidden
behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL DVSEC
/ 'mem_enable') before enabling new CXL 2.0 decode configurations (CXL
HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYpFUogAKCRDfioYZHlFs
Zz+VAP9o/NkYhbaM2Ne9ImgsdJii96gA8nN7q/q/ZoXjsSx2WQD+NRC5d3ZwZDCa
9YKEkntnvbnAZOCs+ZUuyZBgNh6vsgU=
=p92w
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for this cycle.
The highlight is new driver-core infrastructure and CXL subsystem
changes for allowing lockdep to validate device_lock() usage. Thanks
to PeterZ for setting me straight on the current capabilities of the
lockdep API, and Greg acked it as well.
On the CXL ACPI side this update adds support for CXL _OSC so that
platform firmware knows that it is safe to still grant Linux native
control of PCIe hotplug and error handling in the presence of CXL
devices. A circular dependency problem was discovered between suspend
and CXL memory for cases where the suspend image might be stored in
CXL memory where that image also contains the PCI register state to
restore to re-enable the device. Disable suspend for now until an
architecture is defined to clarify that conflict.
Lastly a collection of reworks, fixes, and cleanups to the CXL
subsystem where support for snooping mailbox commands and properly
handling the "mem_enable" flow are the highlights.
Summary:
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously
hidden behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag
set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL
DVSEC / 'mem_enable') before enabling new CXL 2.0 decode
configurations (CXL HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure"
* tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (47 commits)
cxl/port: Enable HDM Capability after validating DVSEC Ranges
cxl/port: Reuse 'struct cxl_hdm' context for hdm init
cxl/port: Move endpoint HDM Decoder Capability init to port driver
cxl/pci: Drop @info argument to cxl_hdm_decode_init()
cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()
cxl/mem: Skip range enumeration if mem_enable clear
cxl/mem: Consolidate CXL DVSEC Range enumeration in the core
cxl/pci: Move cxl_await_media_ready() to the core
cxl/mem: Validate port connectivity before dvsec ranges
cxl/mem: Fix cxl_mem_probe() error exit
cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()
cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()
cxl/mem: Drop mem_enabled check from wait_for_media()
nvdimm: Fix firmware activation deadlock scenarios
device-core: Kill the lockdep_mutex
nvdimm: Drop nd_device_lock()
ACPI: NFIT: Drop nfit_device_lock()
nvdimm: Replace lockdep_mutex with local lock classes
cxl: Drop cxl_device_lock()
cxl/acpi: Add root device lockdep validation
...
Marge Energy Model support updates and cpuidle updates for 5.19-rc1:
- Update the Energy Model support code to allow the Energy Model to be
artificial, which means that the power values may not be on a uniform
scale with other devices providing power information, and update the
cpufreq_cooling and devfreq_cooling thermal drivers to support
artificial Energy Models (Lukasz Luba).
- Make DTPM check the Energy Model type (Lukasz Luba).
- Fix policy counter decrementation in cpufreq if Energy Model is in
use (Pierre Gondois).
- Add AlderLake processor support to the intel_idle driver (Zhang Rui).
- Fix regression leading to no genpd governor in the PSCI cpuidle
driver and fix the riscv-sbi cpuidle driver to allow a genpd
governor to be used (Ulf Hansson).
* pm-em:
PM: EM: Decrement policy counter
powercap: DTPM: Check for Energy Model type
thermal: cooling: Check Energy Model type in cpufreq_cooling and devfreq_cooling
Documentation: EM: Add artificial EM registration description
PM: EM: Remove old debugfs files and print all 'flags'
PM: EM: Change the order of arguments in the .active_power() callback
PM: EM: Use the new .get_cost() callback while registering EM
PM: EM: Add artificial EM flag
PM: EM: Add .get_cost() callback
* pm-cpuidle:
cpuidle: riscv-sbi: Fix code to allow a genpd governor to be used
cpuidle: psci: Fix regression leading to no genpd governor
intel_idle: Add AlderLake support
In commit e458716a92 ("PM: EM: Mark inefficiencies in CPUFreq"),
cpufreq_cpu_get() is called without a cpufreq_cpu_put(), permanently
increasing the reference counts of the policy struct.
Decrement the reference count once the policy struct is not used
anymore.
Fixes: e458716a92 ("PM: EM: Mark inefficiencies in CPUFreq")
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The CXL specification claims S3 support at a hardware level, but at a
system software level there are some missing pieces. Section 9.4 (CXL
2.0) rightly claims that "CXL mem adapters may need aux power to retain
memory context across S3", but there is no enumeration mechanism for the
OS to determine if a given adapter has that support. Moreover the save
state and resume image for the system may inadvertantly end up in a CXL
device that needs to be restored before the save state is recoverable.
I.e. a circular dependency that is not resolvable without a third party
save-area.
Arrange for the cxl_mem driver to fail S3 attempts. This still nominaly
allows for suspend, but requires unbinding all CXL memory devices before
the suspend to ensure the typical DRAM flow is taken. The cxl_mem unbind
flow is intended to also tear down all CXL memory regions associated
with a given cxl_memdev.
It is reasonable to assume that any device participating in a System RAM
range published in the EFI memory map is covered by aux power and
save-area outside the device itself. So this restriction can be
minimized in the future once pre-existing region enumeration support
arrives, and perhaps a spec update to clarify if the EFI memory map is
sufficent for determining the range of devices managed by
platform-firmware for S3 support.
Per Rafael, if the CXL configuration prevents suspend then it should
fail early before tasks are frozen, and mem_sleep should stop showing
'mem' as an option [1]. Effectively CXL augments the platform suspend
->valid() op since, for example, the ACPI ops are not aware of the CXL /
PCI dependencies. Given the split role of platform firmware vs OS
provisioned CXL memory it is up to the cxl_mem driver to determine if
the CXL configuration has elements that platform firmware may not be
prepared to restore.
Link: https://lore.kernel.org/r/CAJZ5v0hGVN_=3iU8OLpHY3Ak35T5+JcBM-qs8SbojKrpd0VXsA@mail.gmail.com [1]
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/165066828317.3907920.5690432272182042556.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Change the comment to a normal (non-kernel-doc) comment to avoid
these kernel-doc warnings:
kernel/power/snapshot.c:335: warning: This comment starts with '/**', but
isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Data types related to memory bitmaps.
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add parameter description in alloc_rtree_node() kernel-doc
comment and fix several inconsistent function name descriptions.
Remove some warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
kernel/power/snapshot.c:438: warning: Function parameter or member
'gfp_mask' not described in 'alloc_rtree_node'
kernel/power/snapshot.c:438: warning: Function parameter or member
'safe_needed' not described in 'alloc_rtree_node'
kernel/power/snapshot.c:438: warning: Function parameter or member 'ca'
not described in 'alloc_rtree_node'
kernel/power/snapshot.c:438: warning: Function parameter or member
'list' not described in 'alloc_rtree_node'
kernel/power/snapshot.c:916: warning: expecting prototype for
memory_bm_rtree_next_pfn(). Prototype was for memory_bm_next_pfn()
instead
kernel/power/snapshot.c:1947: warning: expecting prototype for
alloc_highmem_image_pages(). Prototype was for alloc_highmem_pages()
instead
kernel/power/snapshot.c:2230: warning: expecting prototype for load
header(). Prototype was for load_header() instead
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
[ rjw: Comment adjustments to avoid line breaks ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently pm_pr_dbg() is used to filter kernel pm debug messages based
on pm_debug_messages_on flag. The problem is if we enable/disable this
flag it will affect all pm_pr_dbg() calls at once, so we can't
individually control them.
This patch changes pm_pr_dbg() implementation as such:
- If pm_debug_messages_on is enabled, print the message.
- If pm_debug_messages_on is disabled and CONFIG_DYNAMIC_DEBUG is
enabled, only print the messages explicitly enabled on
/sys/kernel/debug/dynamic_debug/control.
- If pm_debug_messages_on is disabled and CONFIG_DYNAMIC_DEBUG is
disabled, don't print the message.
Signed-off-by: David Cohen <dacohen@pm.me>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The macro -DDEBUG is broadly enabled on kernel/power/ directory if
CONFIG_DYNAMIC_DEBUG is enabled. As side effect all debug messages using
pr_debug() and dev_dbg() are enabled by default on dynamic debug.
We're reworking pm_pr_dbg() to support dynamic debug, where pm_pr_dbg()
will print message if either pm_debug_messages_on flag is set or if it's
explicitly enabled on dynamic debug's control. That means if we let
-DDEBUG broadly set, the pm_debug_messages_on flag will be bypassed by
default on pm_pr_dbg() if dynamic debug is also enabled.
The files that directly use pr_debug() and dev_dbg() on kernel/power/ are:
- swap.c
- snapshot.c
- energy_model.c
And those files do not use pm_pr_dbg(). So if we limit -DDEBUG to them,
we keep the same functional behavior while allowing the pm_pr_dbg()
refactor.
Signed-off-by: David Cohen <dacohen@pm.me>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Energy Model gets more bits used in 'flags'. Avoid adding another
debugfs file just to print what is the status of a new flag. Simply
remove old debugfs files and add one generic which prints all flags
as a hex value.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The .active_power() callback passes the device pointer when it's called.
Aligned with a convetion present in other subsystems and pass the 'dev'
as a first argument. It looks more cleaner.
Adjust all affected drivers which implement that API callback.
Suggested-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Energy Model (EM) allows to provide the 'cost' values when the device
driver provides the .get_cost() optional callback. This removes
restriction which is in the EM calculation function of the 'cost'
for each performance state. Now, the driver is in charge of providing
the right values which are then used by Energy Aware Scheduler.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The Energy Model (EM) can be used on platforms which are missing real
power information. Those platforms would implement .get_cost() which
populates needed values for the Energy Aware Scheduler (EAS). The EAS
doesn't use 'power' fields from EM, but other frameworks might use them.
Thus, to avoid miss-usage of this specific type of EM, introduce a new
flags which can be checked by other frameworks.
Signed-off-by: Pierre Gondois <Pierre.Gondois@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If an invalid option is given for "test_suspend=<option>", the entire
string is added to init's environment, so return 1 instead of 0 from
the __setup handler.
Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5
test_suspend=invalid"
and
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/bzImage-517rc5
test_suspend=invalid
Fixes: 2ce986892f ("PM / sleep: Enhance test_suspend option with repeat capability")
Fixes: 27ddcc6596 ("PM / sleep: Add state field to pm_states[] entries")
Fixes: a9d7052363 ("PM: Separate suspend to RAM functionality from core")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If an invalid value is used in "resumedelay=<seconds>", it is
silently ignored. Add a warning message and then let the __setup
handler return 1 to indicate that the kernel command line option
has been handled.
Fixes: 317cf7e5e8 ("PM / hibernate: convert simple_strtoul to kstrtoul")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Address the following W=1 kernel build warning:
kernel/power/swap.c:120: warning: This comment starts with '/**', but
isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As 'swsusp_check' open 'hib_resume_bdev', if call 'create_basic_memory_bitmaps'
failed, we need to close 'hib_resume_bdev' in 'load_image_and_restore' function.
Signed-off-by: Ye Bin <yebin10@huawei.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After commit e3728b50cd ("ACPI: PM: s2idle: Avoid possible race
related to the EC GPE") wakeup interrupts occurring immediately after
the one discarded by acpi_s2idle_wake() may be missed. Moreover, if
the SCI triggers again immediately after the rearming in
acpi_s2idle_wake(), that wakeup may be missed too.
The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup()
when pm_wakeup_irq is 0, but that's not the case any more after the
interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is
cleared by the pm_wakeup_clear() call in s2idle_loop(). However,
there may be wakeup interrupts occurring in that time frame and if
that happens, they will be missed.
To address that issue first move the clearing of pm_wakeup_irq to
the point at which it is known that the interrupt causing
acpi_s2idle_wake() to tun will be discarded, before rearming the SCI
for wakeup. Moreover, because that only reduces the size of the
time window in which the issue may manifest itself, allow
pm_system_irq_wakeup() to register two second wakeup interrupts in
a row and, when discarding the first one, replace it with the second
one. [Of course, this assumes that only one wakeup interrupt can be
discarded in one go, but currently that is the case and I am not
aware of any plans to change that.]
Fixes: e3728b50cd ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pass the block_device and operation that we plan to use this bio for to
bio_alloc to optimize the assignment. NULL/0 can be passed, both for the
passthrough case on a raw request_queue and to temporarily avoid
refactoring some nasty code.
Also move the gfp_mask argument after the nr_vecs argument for a much
more logical calling convention matching what most of the kernel does.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220124091107.642561-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no good reason to keep genhd.h separate from the main blkdev.h
header that includes it. So fold the contents of genhd.h into blkdev.h
and remove genhd.h entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is an unused wrapper forcing kmalloc allocation for registering
nosave regions. Also, rename __register_nosave_region() to
register_nosave_region() now that there is no need for disambiguation.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The buffer handling in pm_show_wakelocks() is tricky, and hopefully
correct. Ensure it really is correct by using sysfs_emit_at() which
handles all of the tricky string handling logic in a PAGE_SIZE buffer
for us automatically as this is a sysfs file being read from.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Theoretically, when the hardware signature in FACS changes, the OS
is supposed to gracefully decline to attempt to resume from S4:
"If the signature has changed, OSPM will not restore the system
context and can boot from scratch"
In practice, Windows doesn't do this and many laptop vendors do allow
the signature to change especially when docking/undocking, so it would
be a bad idea to simply comply with the specification by default in the
general case.
However, there are use cases where we do want the compliant behaviour
and we know it's safe. Specifically, when resuming virtual machines where
we know the hypervisor has changed sufficiently that resume will fail.
We really want to be able to *tell* the guest kernel not to try, so it
boots cleanly and doesn't just crash. This patch provides a way to opt
in to the spec-compliant behaviour on the command line.
A follow-up patch may do this automatically for certain "known good"
machines based on a DMI match, or perhaps just for all hypervisor
guests since there's no good reason a hypervisor would change the
hardware_signature that it exposes to guests *unless* it wants them
to obey the ACPI specification.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
snapshot_write() is inappropriately limiting the amount of data that can
be written in cases where a partial page has already been written. For
example, one would expect to be able to write 1 byte, then 4095 bytes to
the snapshot device, and have both of those complete fully (since now
we're aligned to a page again). But what ends up happening is we write 1
byte, then 4094/4095 bytes complete successfully.
The reason is that simple_write_to_buffer()'s second argument is the
total size of the buffer, not the size of the buffer minus the offset.
Since simple_write_to_buffer() accounts for the offset in its
implementation, snapshot_write() can just pass the full page size
directly down.
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 39fbef4b0f ("PM: hibernate: Get block device exclusively in
swsusp_check()") changed the opening mode of the block device to
(FMODE_READ | FMODE_EXCL).
In the corresponding calls to swsusp_close(), the mode is still just
FMODE_READ which triggers the warning in blkdev_flush_mapping() on
resume from hibernate.
So, use the mode (FMODE_READ | FMODE_EXCL) also when closing the
device.
Fixes: 39fbef4b0f ("PM: hibernate: Get block device exclusively in swsusp_check()")
Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Add support for inefficient operating performance points to the
Energy Model and modify cpufreq to use them properly (Vincent
Donnefort).
- Rearrange the DTPM framework code to simplify it and make it easier
to follow (Daniel Lezcano).
- Fix power intialization in DTPM (Daniel Lezcano).
- Add CPU load consideration when estimating the instaneous power
consumption in DTPM (Daniel Lezcano).
- Fix cpu->pstate.turbo_freq initialization in intel_pstate (Zhang
Rui).
- Make intel_pstate process HWP Guaranteed change notifications from
the processor (Srinivas Pandruvada).
- Fix typo in cpufreq.h (Rafael Wysocki).
- Fix tegra driver to handle BPMP errors properly (Mikko Perttunen).
- Fix the parameter usage of the newly added perf-domain API (Hector
Yuan).
- Minor cleanups to cppc, vexpress and s3c244x drivers (Han Wang,
Guenter Roeck, and Arnd Bergmann).
- Fix kobject memory leaks in cpuidle error paths (Anel Orazgaliyeva).
- Make intel_idle enable interrupts before entering C1 on some Xeon
processor models (Artem Bityutskiy).
- Clean up hib_wait_io() (Falla Coulibaly).
- Fix sparse warnings in hibernation-related code (Anders Roxell).
- Use vzalloc() and kzalloc() instead of their open-coded
equivalents in hibernation-related code (Cai Huoqing).
- Prevent user space from crashing the kernel by attempting to
restore the system state from a swap partition in use (Ye Bin).
- Do not let "syscore" devices runtime-suspend during system PM
transitions (Rafael Wysocki).
- Do not pause cpuidle in the suspend-to-idle path (Rafael Wysocki).
- Pause cpuidle later and resume it earlier during system PM
transitions (Rafael Wysocki).
- Make system suspend code use valid_state() consistently (Rafael
Wysocki).
- Add support for enabling wakeup IRQs after invoking the
->runtime_suspend() callback and make two drivers use it (Chunfeng
Yun).
- Make the association of ACPI device objects with PCI devices more
straightforward and simplify the code doing that for all devices
in general (Rafael Wysocki).
- Eliminate struct pci_platform_pm_ops and handle the both of its
users (PCI and Intel MID) directly in the PCI bus code (Rafael
Wysocki).
- Simplify and clarify ACPI PCI device PM helpers (Rafael Wysocki).
- Fix ordering of operations in pci_back_from_sleep() (Rafael
Wysocki).
- Make exynos-ppmu use hyphens in DT properties (Krzysztof
Kozlowski).
- Simplify parsing event-type from DT in exynos-ppmu (Krzysztof
Kozlowski).
- Strengthen check for freq_table in devfreq (Samuel Holland).
-----BEGIN PGP SIGNATURE-----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=L2Jo
-----END PGP SIGNATURE-----
Merge tag 'pm-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These make the power management of PCI devices with ACPI companions
more straightforwad, add support for inefficient operating performance
points to the Energy model and make cpufreq handle them as
appropriate, rearrange the handling of cpuidle during system PM
transitions, update a few cpufreq drivers and intel_idle, fix assorded
issues and clean up code in multiple places.
Specifics:
- Add support for inefficient operating performance points to the
Energy Model and modify cpufreq to use them properly (Vincent
Donnefort).
- Rearrange the DTPM framework code to simplify it and make it easier
to follow (Daniel Lezcano).
- Fix power intialization in DTPM (Daniel Lezcano).
- Add CPU load consideration when estimating the instaneous power
consumption in DTPM (Daniel Lezcano).
- Fix cpu->pstate.turbo_freq initialization in intel_pstate (Zhang
Rui).
- Make intel_pstate process HWP Guaranteed change notifications from
the processor (Srinivas Pandruvada).
- Fix typo in cpufreq.h (Rafael Wysocki).
- Fix tegra driver to handle BPMP errors properly (Mikko Perttunen).
- Fix the parameter usage of the newly added perf-domain API (Hector
Yuan).
- Minor cleanups to cppc, vexpress and s3c244x drivers (Han Wang,
Guenter Roeck, and Arnd Bergmann).
- Fix kobject memory leaks in cpuidle error paths (Anel
Orazgaliyeva).
- Make intel_idle enable interrupts before entering C1 on some Xeon
processor models (Artem Bityutskiy).
- Clean up hib_wait_io() (Falla Coulibaly).
- Fix sparse warnings in hibernation-related code (Anders Roxell).
- Use vzalloc() and kzalloc() instead of their open-coded equivalents
in hibernation-related code (Cai Huoqing).
- Prevent user space from crashing the kernel by attempting to
restore the system state from a swap partition in use (Ye Bin).
- Do not let "syscore" devices runtime-suspend during system PM
transitions (Rafael Wysocki).
- Do not pause cpuidle in the suspend-to-idle path (Rafael Wysocki).
- Pause cpuidle later and resume it earlier during system PM
transitions (Rafael Wysocki).
- Make system suspend code use valid_state() consistently (Rafael
Wysocki).
- Add support for enabling wakeup IRQs after invoking the
->runtime_suspend() callback and make two drivers use it (Chunfeng
Yun).
- Make the association of ACPI device objects with PCI devices more
straightforward and simplify the code doing that for all devices in
general (Rafael Wysocki).
- Eliminate struct pci_platform_pm_ops and handle the both of its
users (PCI and Intel MID) directly in the PCI bus code (Rafael
Wysocki).
- Simplify and clarify ACPI PCI device PM helpers (Rafael Wysocki).
- Fix ordering of operations in pci_back_from_sleep() (Rafael
Wysocki).
- Make exynos-ppmu use hyphens in DT properties (Krzysztof
Kozlowski).
- Simplify parsing event-type from DT in exynos-ppmu (Krzysztof
Kozlowski).
- Strengthen check for freq_table in devfreq (Samuel Holland)"
* tag 'pm-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (49 commits)
cpufreq: Fix parameter in parse_perf_domain()
usb: mtu3: enable wake-up interrupt after runtime_suspend called
usb: xhci-mtk: enable wake-up interrupt after runtime_suspend called
PM / wakeirq: support enabling wake-up irq after runtime_suspend called
PM / devfreq: Strengthen check for freq_table
devfreq: exynos-ppmu: simplify parsing event-type from DT
devfreq: exynos-ppmu: use node names with hyphens
cpufreq: intel_pstate: Fix cpu->pstate.turbo_freq initialization
PM: suspend: Use valid_state() consistently
PM: sleep: Pause cpuidle later and resume it earlier during system transitions
PM: suspend: Do not pause cpuidle in the suspend-to-idle path
PM: sleep: Do not let "syscore" devices runtime-suspend during system transitions
PM: hibernate: Get block device exclusively in swsusp_check()
powercap/drivers/dtpm: Fix power limit initialization
powercap/drivers/dtpm: Scale the power with the load
powercap/drivers/dtpm: Use container_of instead of a private data field
powercap/drivers/dtpm: Simplify the dtpm table
powercap/drivers/dtpm: Encapsulate even more the code
PM: hibernate: swap: Use vzalloc() and kzalloc()
PM: hibernate: fix sparse warnings
...
Merge Energy Model and power capping updates for 5.16-rc1:
- Add support for inefficient operating performance points to the
Energy Model and modify cpufreq to use them properly (Vincent
Donnefort).
- Rearrange the DTPM framework code to simplify it and make it easier
to follow (Daniel Lezcano).
- Fix power intialization in DTPM (Daniel Lezcano).
- Add CPU load consideration when estimating the instaneous power
consumption in DTPM (Daniel Lezcano).
* pm-em:
cpufreq: mediatek-hw: Fix cpufreq_table_find_index_dl() call
PM: EM: Mark inefficiencies in CPUFreq
cpufreq: Use CPUFREQ_RELATION_E in DVFS governors
cpufreq: Introducing CPUFREQ_RELATION_E
cpufreq: Add an interface to mark inefficient frequencies
cpufreq: Make policy min/max hard requirements
PM: EM: Allow skipping inefficient states
PM: EM: Extend em_perf_domain with a flag field
PM: EM: Mark inefficient states
PM: EM: Fix inefficient states detection
* powercap:
powercap/drivers/dtpm: Fix power limit initialization
powercap/drivers/dtpm: Scale the power with the load
powercap/drivers/dtpm: Use container_of instead of a private data field
powercap/drivers/dtpm: Simplify the dtpm table
powercap/drivers/dtpm: Encapsulate even more the code
Make valid_state() check if the ->enter callback is present in
suspend_ops (only PM_SUSPEND_TO_IDLE can be valid otherwise) and
make sleep_state_supported() call valid_state() consistently to
validate the states other than PM_SUSPEND_TO_IDLE.
While at it, clean up the comment in valid_state().
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 8651f97bd9 ("PM / cpuidle: System resume hang fix with
cpuidle") that introduced cpuidle pausing during system suspend
did that to work around a platform firmware issue causing systems
to hang during resume if CPUs were allowed to enter idle states
in the system suspend and resume code paths.
However, pausing cpuidle before the last phase of suspending
devices is the source of an otherwise arbitrary difference between
the suspend-to-idle path and other system suspend variants, so it is
cleaner to do that later, before taking secondary CPUs offline (it
is still safer to take secondary CPUs offline with cpuidle paused,
though).
Modify the code accordingly, but in order to avoid code duplication,
introduce new wrapper functions, pm_sleep_disable_secondary_cpus()
and pm_sleep_enable_secondary_cpus(), to combine cpuidle_pause()
and cpuidle_resume(), respectively, with the handling of secondary
CPUs during system-wide transitions to sleep states.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
It is pointless to pause cpuidle in the suspend-to-idle path,
because it is going to be resumed in the same path later and
pausing it does not serve any particular purpose in that case.
Rework the code to avoid doing that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Rafael J. Wysocki
Xueqin Luo
xiongxin
Mario Limonciello
Linus Torvalds
Peter Zijlstra
Shivnandan Kumar
Tetsuo Handa
Lukasz Luba
Bart Van Assche
Kalesh Singh
Dmitry Osipenko
Pierre Gondois
Dan Williams
Haowen Bai
Yang Li
David Cohen
Randy Dunlap
Jiapeng Chong
Ye Bin
Christoph Hellwig
Amadeusz Sławiński
Greg Kroah-Hartman
David Woodhouse
Evan Green
Thomas Zeitlhofer