Since we changed the behaviour of the set_timeout operation in the
watchdog API, we need to change the allready converted drivers so
that they update the timeout field at the end of the set_timeout
operation.
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
There is no need for internal module versioning for in-kernel driver:
remove mei_version.h
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change mei_write_message's return type from bool to int
to enable propagation of the error code up to caller functions.
The function now returns -EIO when low level write fails and 0
on success.
A similar change is done in intermediate caller functions:
mei_send_flow_control, mei_connect, and mei_disconnect
This makes code more alike to typical Linux kernel error
handling.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The below patch fixes some typos in drivers/staging/mei/* that I have found while
doing a little bit of reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mei_irq_thread_read_bus_message we reused mei_hdr
allocated on read buffer to write the stop message.
There is no bug associated with this but for code
clarity we use write buffer also for message header.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace bitfield struct hbm_cmd with simple u8 as we
always access the value as whole. This allows us to remove
few ugly type casts
For possible further uses and documentation purposes we add
corresponding bitmask defines
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
~ENODEV is a different number than -ENODEV
Signed-off-by: Devin J. Pohly <djpohly@gmail.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch eliminates following type of warnings
warning: no previous prototype for '...func...' [-Wmissing-prototypes]
For this is a single file example lets make all API-like functions
be static.
Since all static functions should be used so let's call
to amt_host_if_deinit() even if in this example it's not really necessary
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Looks during cleanup we converted type of host_version_supported
member from UINT8 into int instead of u8.
Since we've queried only for boolean value of
this variable the bug wasn't really visible.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
this example tries to connect to amt host interface client and retrieve
versions of its sub components
When AMT is enabled an output might look like that:
Intel AMT: ENABLED
Flash: 6.1.0
Netstack: 6.1.0
AMTApps: 6.1.0
AMT: 6.1.0
Sku: 258
VendorID: 8086
Build Number: 1042
Recovery Version: 6.1.0
Recovery Build Num: 1042
Legacy Mode: False
otherwise:
Intel AMT: DISABLED
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. convert all read buffers to unsigned char and drop useless castings
2. simplify mei_read_slots implementation
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1. Update Copyright to 2012
2. Also fix mei.h copyright format
checkpaatch complained:
WARNING: please, no spaces at the start of a line
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iamthif_mtu doesn't have default value anymore it
is always supplied by the ME firmware
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The following changes were made in the document:
1. Update URLs to working links
2. remove old information about module parameters
3. Add IOCTL information.
4. cleanups and fix spelling
5. driver changed from character device to misc character device
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The irq handler processes queued mei clients connect requests, which were
not transferred to the device in ioctl context due to unavailability
of the write buffer.
The handler may transfer the connection request only if there is
no other ongoing requests for the same mei id.
This condition was implemented inversely which depending on
the write buffer availability lead to seemingly random
failures during connection attempts.
Cc: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Natalia Ovsyanikov <natalia.ovsyanikov@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
list_for_each_entry_safe(pos, next, &head, list)
if (pos) {
....
}
This check isn't needed. The list cursor in a list_for_each()
loop is always a valid pointer
Cc: Oren Weil <oren.jer.weil@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
1. No need to check if a list is empty before list_for_each_ looping as
this is already checked by loop stopping conditional.
The side effect is reduced indentation depth
from:
if (!list_empty)
list_for_each()
to:
list_for_each()
2. drop cb_ prefix from cl_pos, cl_next variables used in list_for_each
loops. The code is more compact and readable
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
We can remove BUG_ON in mei_irq_thread_read_client_message()
as the testing for response buffer size overflow has already
graceful handling in place.
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
MEI_CLIENTS_MAX is 255 and host_client_id is u8 therefore
for check to work we need to first assign the return value
of find_first_zero_bit to unsigned long variable
Fix warning
drivers/staging/mei/main.c: In function mei_open
drivers/staging/mei/main.c:260:2: warning: comparison is always false due to limited range of data type
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Misc device provides everything MEI needs for registration,
it doesn't required separate driver class.
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wd_ops and wd_info structures are local to wd.c so mark them static
Cc: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
moving the final state, clearing of the client maps and
updating of mei state out from mei_host_client_properties function.
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sizeof a pointer-typed expression returns the size of the pointer, not that
of the pointed data.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression *e;
type T;
identifier f;
@@
f(...,(T)e,...,
-sizeof(e)
+sizeof(*e)
,...)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wd module parameter is not needed now that driver is using watchdog core.
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
starting removing the dependency from the module parameters.
setting the default timeout on init so don't need to check if it is bigger
then zero.
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
the timer_work does not only handle watchdog but also handles mei timeouts.
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
the wd_work and mei_wd_timer() function was not just for watchdog.
mei managing the AMT watchdog going to be replace by the kernel watchdog
interface.
the mei_timer() will still manage the mei driver timeouts.
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
add the ability to let the watchdog core set
the AMT watchdog timeout value.
the default value will be only set in the start function.
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
adding watchdog ping to send ping/heartbeat to the the AMT watchdog client.
in addition removing the heartbeat sending from the driver timers function.
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
adding start and stop function.
start - check if AMT wd client is connected, which is been connected on driver
load.
stop - send stop command to AMT wd.
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Adding kernel watchdog interface (/dev/watchdog) to the MEI Driver to support AMT Watchdog feature.
This patch and the following one will replace MEI Driver self management of the AMT watchdog
with the standard kernel watchdog interface.
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
AMTHI need to be initialized after WD Client was initialized, moving the AMTHI outside
of the WD initialization function.
in order to remove the coupling between the initialization of those clients.
AMTHI is getting initialized (getting connected to the FW feature/client) in two ways:
1) if mei driver fails to send connect message to watchdog client (WD initialization), then
immediately the AMTHI client getting initialized right after the watchdog initialization function.
2) if Watchdog client success to send connect message to watchdog client, then only after
the driver is getting the connect response message the AMTHI client is getting initialized
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mei_open() acquires dev->device_lock mutex and try to allocate mei_cl,
but if the allocation fails it goes to return statement. As a result
dev->device_lock left locked.
The patch fixes goto to unlock dev->device_lock mutex on this path.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
enable msi when supported
also in that case we can drop the quick handler
from the threaded interrupt that protected us from
handling USB interrupts
Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
keeping the exit flow in a reverse order then the init flow.
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This handles the merge conflicts with the
drivers/staging/brcm80211/Kconfig file due to changes on the two
different branches.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It was pointed out by 'make versioncheck' that include of
linux/version.h is not needed in drivers/staging/mei/main.c .
This patch removes it.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix warning: reported in http://marc.info/?l=linux-kernel&m=130812960402606&w=2
drivers/staging/mei/interrupt.c: warning: 'buffer' may be used uninitialized in this function: => 198
It is a real issue and wrong path in execution is taken when
list is empty or (cl && _mei_irq_thread_state_ok(cl, mei_hdr))
evaluates to false
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
1. remove list used for loop. There were only 2 loops used in non
time critical places so we can safely unroll them
2. normalize functions names operating on io_list to mei_io_list_<op>
3. rename mei_fe_same_id to mei_cl_cmp_id used for comparing list
elements containing struct mei_cl
4. group together io_list functions in the header file
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Oren Weil <oren.jer.weil@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Wim Van Sebroeck
Tomas Winkler
Justin P. Mattock
Devin J. Pohly
Masanari Iida
Oren Weil
Natalia Ovsyanikov
Julia Lawall
Alexey Khoroshilov
Greg Kroah-Hartman
Jesper Juhl