This reverts commit 569a7b6c2e. The
code was correct originally. The default setting for ACLs after a
remount should be to be the same as before the remount.
Signed-off-by: Abhijith Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Due to a mix up between the jdata attribute and inherit jdata attribute
it has not been possible to set the inherit jdata attribute on
directories. This is now fixed and the ioctl will report the inherit
jdata attribute for directories rather than the jdata attribute as it
did previously. This stems from our need to have the one bit in the
ioctl attr flags mean two different things according to whether the
underlying inode is a directory or not.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The error path in prepare_write() was incorrect in the (very rare) event
that the transaction fails to start. The following prevents a NULL
pointer dereference,
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The following patch fixes a bug where 0 was being used as a return code
to indicate "nothing to do" when in fact 0 was a valid block location
which might be returned by the function.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch seems to fix the problem described in bugzilla bug 246114.
It was written by Steve Whitehouse with some tweaking by me.
The code was looping in the relatively new section of code designed to
search for and reuse unlinked inodes. In cases where it was finding an
appropriate inode to reuse, it was looping around and finding the same
block over and over because a "<=" check should have been a "<" when
comparing the goal block to the last unlinked block found.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is part 2 of the patch for bug #245832, part 1 of which is already
in the git tree.
The problem was that sdp->sd_log_num_databuf was not always being
protected by the gfs2_log_lock spinlock, but the sd_log_le_databuf
(which it is supposed to reflect) was protected. That meant there
was a timing window during which gfs2_log_flush called
databuf_lo_before_commit and the count didn't match what was
really on the linked list in that window. So when it ran out of
items on the linked list, it decremented total_dbuf from 0 to -1 and
thus never left the "while(total_dbuf)" loop.
The solution is to protect the variable sdp->sd_log_num_databuf so
that the value will always match the contents of the linked list,
and therefore the number will never go negative, and therefore, the
loop will be exited properly.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix a long standing bug where a blocking callback would be missed
when there's a granted lock in PR mode and waiting locks in both
PR and CW modes (and the PR lock was added to the waiting queue
before the CW lock). The logic simply compared the numerical values
of the modes to determine if a blocking callback was required, but in
the one case of PR and CW, the lower valued CW mode blocks the higher
valued PR mode. We just need to add a special check for this PR/CW
case in the tests that decide when a blocking callback is needed.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The last patch to clean out 'othercon' structures only fixed half the problem.
The attached addresses the other situations too, and fixes bz#238490
Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There's a memory leak in fs/dlm/member.c::dlm_add_member().
If "dlm_node_weight(ls->ls_name, nodeid)" returns < 0, then
we'll return without freeing the memory allocated to the (at
that point yet unused) 'memb'.
This patch frees the allocated memory in that case and thus
avoids the leak.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
When we build a sockaddr_storage for an IP address, clear the unused parts as
they could be used for node comparisons.
I have seen this occasionally make sctp connections fail.
Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Fix regression in recent patch "[DLM] variable allocation" which
attempts to dereference an "ls" struct when it's NULL.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This patch clears the othercon pointer and frees the memory when a connnection
is closed. This could cause a small memory leak when nodes leave the cluster.
Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
ocfs2: set non-default s_time_gran during mount
ocfs2: Retry sendpage() if it returns EAGAIN
ocfs2: Fix rename/extend race
[2.6 patch] ocfs2_insert_extent(): remove dead code
ocfs2: Fix max offset calculations
ocfs2: check ia_size limits in setattr
ocfs2: Fix some casting errors related to file writes
ocfs2: use s_maxbytes directly in ocfs2_change_file_space()
ocfs2: Restrict inode changes in ocfs2_update_inode_atime()
ecryptfs_init() exits without doing any cleanup jobs if
ecryptfs_init_messaging() fails. In that case, eCryptfs leaves
sysfs entries, leaks memory, and causes an invalid page fault.
This patch fixes the problem.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When ecryptfs_lookup() is called against special files, eCryptfs generates
the following errors because it tries to treat them like regular eCryptfs
files.
Error opening lower file for lower_dentry [0xffff810233a6f150], lower_mnt [0xffff810235bb4c80], and flags
[0x8000]
Error opening lower_file to read header region
Error attempting to read the [user.ecryptfs] xattr from the lower file; return value = [-95]
Valid metadata not found in header region or xattr region; treating file as unencrypted
For instance, the problem can be reproduced by the steps below.
# mkdir /root/crypt /mnt/crypt
# mount -t ecryptfs /root/crypt /mnt/crypt
# mknod /mnt/crypt/c0 c 0 0
# umount /mnt/crypt
# mount -t ecryptfs /root/crypt /mnt/crypt
# ls -l /mnt/crypt
This patch fixes it by adding a check similar to directories and
symlinks.
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Need to initialize map_bh.b_state to zero. Otherwise, in case of a faulty
user-buffer its possible to go into dio_zero_block() and submit a page by
mistake - since it checks for buffer_new().
http://marc.info/?l=linux-kernel&m=118551339032528&w=2
akpm: Linus had a (better) patch to just do a kzalloc() in there, but it got
lost. Probably this version is better for -stable anwyay.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Joe Jin <joe.jin@oracle.com>
Acked-by: Zach Brown <zach.brown@oracle.com>
Cc: gurudas pai <gurudas.pai@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need to manually set this to '1' during mount, otherwise inode_setattr()
will chop off the nanosecond portion of our timestamps.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
Instead of treating EAGAIN, returned from sendpage(), as an error, this
patch retries the operation.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
If one process is extending a file while another is renaming it, there
exists a window when rename could flush the old inode's stale i_size to
disk. This patch recognizes the fact that rename is only updating the old
inode's ctime, so it ensures only that value is flushed to disk.
Signed-off-by: Sunil Mushran <sunil.musran@oracle.com>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
This patch removes some now dead code.
Spotted by the Coverity checker.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_max_file_offset() was over-estimating the largest file size for
several cases. This wasn't really a problem before, but now that we support
sparse files, it needs to be more accurate.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
We have to manually check the requested truncate size as the check in
vmtruncate() comes too late for Ocfs2.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_align_clusters_to_page_index() needs to cast the clusters shift to
pgoff_t and ocfs2_file_buffered_write() needs loff_t when calculating
destination start for memcpy.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
There's no need to recalculate things via ocfs2_max_file_offset() as we've
already done that to fill s_maxbytes, so use that instead. We can also
un-export ocfs2_max_file_offset() then.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
ocfs2_update_inode_atime() calls ocfs2_mark_inode_dirty() to push changes
from the struct inode into the ocfs2 disk inode. The problem is,
ocfs2_mark_inode_dirty() might change other fields, depending on what
happened to the struct inode. Since we don't always have locking to
serialize changes to other fields (like i_size, etc), just fix things up to
only touch the atime field.
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
* git://git.linux-nfs.org/pub/linux/nfs-2.6:
SUNRPC: Replace flush_workqueue() with cancel_work_sync() and friends
NFS: Replace flush_scheduled_work with cancel_work_sync() and friends
SUNRPC: Don't call gss_delete_sec_context() from an rcu context
NFSv4: Don't call put_rpccred() from an rcu callback
NFS: Fix NFSv4 open stateid regressions
NFSv4: Fix a locking regression in nfs4_set_mode_locked()
NFS: Fix put_nfs_open_context
SUNRPC: Fix a race in rpciod_down()
Do not allow cached open for O_RDONLY or O_WRONLY unless the file has been
previously opened in these modes.
Also Fix the calculation of the mode in nfs4_close_prepare. We should only
issue an OPEN_DOWNGRADE if we're sure that we will still be holding the
correct open modes. This may not be the case if we've been doing delegated
opens.
Finally, there is no need to adjust the open mode bit flags in
nfs4_close_done(): that has already been done in nfs4_close_prepare().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We don't really need to clear &state->inode_states inside
nfs4_set_mode_locked, and doing so without holding the inode->i_lock would
in any case be a bug...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We need to grab the inode->i_lock atomically with the last reference put in
order to remove the open context that is being freed from the
nfsi->open_files list.
Fix by converting the kref to a standard atomic counter and then using
atomic_dec_and_lock()...
Thanks to Arnd Bergmann for pointing out the problem.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch removes some duplicated wireless ioctl entries in the array
'struct ioctl_trans ioctl_start[]' of fs/compat_ioctl.c
These entries are registered twice like:
COMPATIBLE_IOCTL(SIOCGIWPRIV)
and
HANDLE_IOCTL(SIOCGIWPRIV, do_wireless_ioctl)
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Debugging the hardware problems in OLPC trac #1905 would be a whole lot
easier if the correct node offsets were printed for the offending nodes.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
The try_to_freeze() call was in the wrong place; we need it in the
signal-pending loop now that a pending freeze also makes
signal_pending() return true.
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
jffs2_add_physical_node_ref() should never really return error -- it's
an internal debugging check which triggered. We really need to work out
why and stop it happening. But in the meantime, let's make the failure
mode a little less nasty.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
This patch fix weird behaviour of UDF mounting procedure. To get UID
changed (for now) we have to type
mount -t udf -o uid=some_user,uid=ignore /dev/device /mnt/moun_point
and specifying two uid at once is strange a bit. So with the patch we are
able to mount without additional 'uid=ignore' option. The same for GID
option is done.
This patch will not break current mount scheme (with two option).
Btw this does fix (I hope) the following
[BUG 6124] mount of UDF fs ignores UID and GID options
http://bugzilla.kernel.org/show_bug.cgi?id=6124
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Michael <auslands-kv@gmx.de>
Cc: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make it a little more clear that this is the default implementation for
the setleast operation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Acked-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It is possible that another process could acquire a new file lease right
after break_lease() is called during a truncate, but before lease-granting
is disabled by the subsequent get_write_access(). Merely switching the
order of the break_lease() and get_write_access() calls prevents this race.
Signed-off-by: David M. Richter <richterd@citi.umich.edu>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It turned out that mounting a corrupted ISO image to a regular file may
succeed, e.g. if an image was prepared as follows:
$ dd if=correct.iso of=bad.iso bs=4k count=8
We then can mount it to a regular file:
# mount -o loop -t iso9660 bad.iso /tmp/file
But mounting it to a directory fails with -ENOTDIR, simply because
the root directory inode doesn't have S_IFDIR set and the condition
in graft_tree() is met:
if (S_ISDIR(nd->dentry->d_inode->i_mode) !=
S_ISDIR(mnt->mnt_root->d_inode->i_mode))
return -ENOTDIR
This is because the root directory inode was read from an incorrect
block. It's supposed to be read from sbi->s_firstdatazone, which is
an absolute value and gets messed up in the case of an incorrect image.
In order to somehow circumvent this we have to check that the root
directory inode is actually a directory after all.
Signed-off-by: Kirill Kuvaldin <kuvkir@epsmu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix file locking for AFS:
(*) Start the lock manager thread under a mutex to avoid a race.
(*) Made the locking non-fair: New readlocks will jump pending writelocks if
there's a readlock currently granted on a file. This makes the behaviour
similar to Linux's VFS locking.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A succesful downcall with a negative result (which indicates that the given
filesystem is not exported to the given user) should not return an error.
Currently mountd is depending on stdio to write these downcalls. With some
versions of libc this appears to cause subsequent writes to attempt to write
all accumulated data (for which writes previously failed) along with any new
data. This can prevent the kernel from seeing responses to later downcalls.
Symptoms will be that nfsd fails to respond to certain requests.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We shouldn't be using negative uid's and gid's in the idmap upcalls.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
RFC 3530 says:
If the server uses an attribute to store the exclusive create verifier, it
will signify which attribute by setting the appropriate bit in the attribute
mask that is returned in the results.
Linux uses the atime and mtime to store the verifier, but sends a zeroed out
bitmask back to the client. This patch makes sure that we set the correct
bits in the bitmask in this situation.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yan Zheng wrote:
> I think I found a bug in ext4/extents.c, "ext4_ext_put_in_cache" uses
> "__u32" to receive physical block number. "ext4_ext_put_in_cache" is
> used in "ext4_ext_get_blocks", it sets ext4 inode's extent cache
> according most recently tree lookup (higher 16 bits of saved physical
> block number are always zero). when serving a mapping request,
> "ext4_ext_get_blocks" first check whether the logical block is in
> inode's extent cache. if the logical block is in the cache and the
> cached region isn't a gap, "ext4_ext_get_blocks" gets physical block
> number by using cached region's physical block number and offset in
> the cached region. as described above, "ext4_ext_get_blocks" may
> return wrong result when there are physical block numbers bigger than
> 0xffffffff.
>
You are right. Thanks for reporting this!
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Cc: Yan Zheng <yanzheng@21cn.com>
Cc: <stable@kernel.org>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix the SYSV IPC SHM to work with the changes applied by the new fault handler
patches when CONFIG_MMU=n.
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
They are handled in a ->compat_ioctl() handler, so it's just noise
when compat_ioctl.c warns which occurs when they are used on non-SBUS
framebuffer devices.
Signed-off-by: David S. Miller <davem@davemloft.net>
Start doing VTOC validation before using its contents.
The validation is adjusted so as not to break existing setups
that do not set the VTOC version, sanity and partition count entries.
VTOC tables with more than 8 partitions will NOT be used.
Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steven Whitehouse
Bob Peterson
David Teigland
Patrick Caulfield
Jesper Juhl
Linus Torvalds
Ryusuke Konishi
Badari Pulavarty
Mark Fasheh
Sunil Mushran
Sunil Mushran
Adrian Bunk
Trond Myklebust
Masakazu Mokuno
David Woodhouse
Joakim Tjernlund
Cyrill Gorcunov
Christoph Hellwig
david m. richter
Robert P. J. Day
Kirill Kuvaldin
Alexey Dobriyan
David Howells
J. Bruce Fields
Jeff Layton
Mingming Cao
David S. Miller
Mark Fortescue