Граф коммитов

916756 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 743f05732f Power management fixes for 5.7-rc4
Prevent the intel_pstate driver from printing excessive diagnostic
 messages in some cases (Chris Wilson), make the hibernation restore
 kernel freeze kernel threads as well as user space tasks (Dexuan Cui)
 and fix the ACPI device PM disagnostic messages to include the correct
 power state name (Kai-Heng Feng).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl6tzqwSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxm2sP/0qZTJNgR9QrA6V0J0qzvJDMhHtZ28nf
 iNbhTMOC/0UlZFvO3ILFdX3iLnYbVdC/wOHdzAk0LetrLJAXmbdHxT6f9LgbaGcZ
 CefiMxNFDCpwKU1FdZLQiqh7WEHeQK0R/khMYAudljzxp+ou4g6WdYBOhAzxCdoW
 anDXJA6a8NIfUAfa/UyNL1amo7LTv7kRsipOY7DQNHt3ql0O+VXvJMaCnPzLUV1q
 7kvn7KsebwurbErByrUPwv/YJN3xvIFrTl0Hc7FLMd+OT7bI6JKWWAXByABBSXxv
 Ol/YbT7ruxVdlSAl0P1382i79VHCze9xd/r5o1Bv4HY3lIKWettGWTWRnNvA+upc
 bNpebdj0to7S/9UQzjsUiGpzoMHeBcUSNoXczk6xhIuT1qTRcrCbVXKocw4kcUWM
 W0HLAJfkBFYN687XyI+Kf+DfC/9kU6AQRetCkBw+2fHH83xw1hB8w0oW0PWQZh1X
 R0ivuKHzWsOHAV+ijEil2Uuxzbm2sUIwAH3pxx99eGlIGH8W3TI1Ffxj4o9PSJk/
 l4rOJyr1549PVOo8a6dE6etMzOGS/sl0O+MTGxdDUujeayCb6c2pLut9zGx772fR
 zzXvYyxH38wJmRwv9lWNww5p+VGYYjbk4CjvifdePHoFIfFkXQH4HLKr/GiP+XaL
 nmD/dCzykj9f
 =SE5Q
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:

 - prevent the intel_pstate driver from printing excessive diagnostic
   messages in some cases (Chris Wilson)

 - make the hibernation restore kernel freeze kernel threads as well as
   user space tasks (Dexuan Cui)

 - fix the ACPI device PM disagnostic messages to include the correct
   power state name (Kai-Heng Feng).

* tag 'pm-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: ACPI: Output correct message on target power state
  PM: hibernate: Freeze kernel threads in software_resume()
  cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once
2020-05-02 13:45:30 -07:00
Rafael J. Wysocki a53839963e Merge branches 'pm-cpufreq' and 'pm-sleep'
* pm-cpufreq:
  cpufreq: intel_pstate: Only mention the BIOS disabling turbo mode once

* pm-sleep:
  PM: hibernate: Freeze kernel threads in software_resume()
2020-05-02 21:39:17 +02:00
Linus Torvalds f66ed1ebbf Changes for 5.7:
- Move the FIBMAP range check and warning out of the backend iomap
 implementation and into the frontend ioctl_fibmap so that the checking
 is consistent for all implementations.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAl6q6lQACgkQ+H93GTRK
 tOvt4g/+NlLRvPceod9x7goJGuBAJD3gmuP/Ma7qzFi5YZE7tbbBKikvKWIgtz8l
 D4kPRepVTeOCECWzvYwbreqizk0WNr5Buc5Ia3QMPrigIUPomRygvNAcFmLIRF58
 VFKIoUupM9oxPbzc5RXLx0QHYanUFZY41AzFTTQb9EGRw+WUzpih6FUxRrra0pFp
 c5FN9pUaX7kAaUfryS5oK5f6T1ZmZWXQyaNOv+fXLdtd9eNMUxTOiBr+agZn0Ay3
 XIdYWfI2ruyDiYYvaO52NAj9+MRwP9oW0aQLnFHwThv1M4I5qxtg0Ljhl4wT6vq5
 VC2HHicETTuN0nTMQo183AU8AS9/SbSaFmgliVGrWiHp+IOyZzEYe3++damAUenH
 k9o7un6i8nISVdoGs3U2yv6hJN1vmvWOK4JE26EOU/AfjHyYE8aqNRf4XR/f5bTr
 nfD45eoN8V00iCIunL2UhluBeON1+KGUdMevn0ia948I9e5+DVMIsUm+vSf3c0ah
 F8oQlGUucApi3KzVA72nmIwG/gP7oUrtjgBKSoRE+W3/ixcy1S5mc0oUYh4I62Ia
 Sgv9pHUNwbWSVXfWIx83YmkaJpCurp5VuJy4FWsg6BNCB81lIosSKKjHpwwx3Xyi
 19WWxvPFrZ2JxxWp6M5XWvYydQS590Mc5j2ywHluZsrwOVc2UBc=
 =6rBo
 -----END PGP SIGNATURE-----

Merge tag 'iomap-5.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull iomap fix from Darrick Wong:
 "Hoist the check for an unrepresentable FIBMAP return value into
  ioctl_fibmap.

  The internal kernel function can handle 64-bit values (and is needed
  to fix a regression on ext4 + jbd2). It is only the userspace ioctl
  that is so old that it cannot deal"

* tag 'iomap-5.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fibmap: Warn and return an error in case of block > INT_MAX
2020-05-02 11:31:12 -07:00
Linus Torvalds 29a47f456d NFS client bugfixes for Linux 5.7
Highlights include:
 
 Stable fixes
 - fix handling of backchannel binding in BIND_CONN_TO_SESSION
 
 Bugfixes
 - Fix a credential use-after-free issue in pnfs_roc()
 - Fix potential posix_acl refcnt leak in nfs3_set_acl
 - defer slow parts of rpc_free_client() to a workqueue
 - Fix an Oopsable race in __nfs_list_for_each_server()
 - Fix trace point use-after-free race
 - Regression: the RDMA client no longer responds to server disconnect requests
 - Fix return values of xdr_stream_encode_item_{present, absent}
 - _pnfs_return_layout() must always wait for layoutreturn completion
 
 Cleanups
 - Remove unreachable error conditions
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESQctxSBg8JpV8KqEZwvnipYKAPIFAl6tczsACgkQZwvnipYK
 APKHWg//QGx2Tolj5dh2jBHa47A5/SYnJxCZAA0/fWdwRtFkW3HyyGne1jU86do2
 SMAVpBpri1WJPt5d3DH66gu4l4UxG1h84s7QP4lGfSa85EmtLh+LoZQCZRqYoDOo
 JAMzWctELu1TUpaa1N5Dhg/qMtMy6ulRMWgzTLqB9a/pQa3onugTK6W7xiut2prj
 PBfFq7N9XXmPboSeGV9bR4L8XKSbTCLEt3U1F2zAGU7UUINvDfpjEXq7BHYCewKL
 ObPW6EWZksyna16H8i/xGWoKgE4JFVjMwQAP7UdDBi+FW9RI6UpTBoR6z9N748j0
 jEocDbI21wgnwmtrVTbzsYm6ttHl4D4egoNxn7m5zjxTU4Ba/RQG2aaHUGFOYpJj
 1FI1f6V1Y5v4mJajdsEH+pGW/4vK/4YMR+7YHJ/hYU/WiXjLf7onIIifdWt4SQdo
 lvZbGcx6IAHYUA4lI7hkcvrK4bbqAnPLFq28nlUWEID5q5D+nA1ZR9iN0FToviDy
 FYyhQzyfD1kt98SV1DjWUqvDDd6IB64iDZTXGmtWvj6c2nbezGiFffvtzUL5LFxY
 QfI8lkpmUyt1EiWlZWhtOh4zsiM5yMZkJB/3RJv3RMmswizSSAHdgCKWhdLpX0bl
 TG1L8yEmcTc5ANS37EhlpcBNbfYw7oIF/OXuReTSRoMQl5hxjfY=
 =w0zk
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - fix handling of backchannel binding in BIND_CONN_TO_SESSION

  Bugfixes:
   - Fix a credential use-after-free issue in pnfs_roc()
   - Fix potential posix_acl refcnt leak in nfs3_set_acl
   - defer slow parts of rpc_free_client() to a workqueue
   - Fix an Oopsable race in __nfs_list_for_each_server()
   - Fix trace point use-after-free race
   - Regression: the RDMA client no longer responds to server disconnect
     requests
   - Fix return values of xdr_stream_encode_item_{present, absent}
   - _pnfs_return_layout() must always wait for layoutreturn completion

  Cleanups:
   - Remove unreachable error conditions"

* tag 'nfs-for-5.7-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: Fix a race in __nfs_list_for_each_server()
  NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION
  SUNRPC: defer slow parts of rpc_free_client() to a workqueue.
  NFSv4: Remove unreachable error condition due to rpc_run_task()
  SUNRPC: Remove unreachable error condition
  xprtrdma: Fix use of xdr_stream_encode_item_{present, absent}
  xprtrdma: Fix trace point use-after-free race
  xprtrdma: Restore wake-up-all to rpcrdma_cm_event_handler()
  nfs: Fix potential posix_acl refcnt leak in nfs3_set_acl
  NFS/pnfs: Fix a credential use-after-free issue in pnfs_roc()
  NFS/pnfs: Ensure that _pnfs_return_layout() waits for layoutreturn completion
2020-05-02 11:24:01 -07:00
Linus Torvalds ed6889db63 dmaengine fixes for v5.7-rc4
Core:
  - Documentation typo fixes
  - fix the channel indexes
  - Dmatest: fixes for process hang and iterations
 Drivers:
  - hisilicon: build error fix without PCI_MSI
  - ti-k3: deadlock fix
  - uniphier-xdmac: fix for reg region
  - pch: fix data race
  - tegra: fix clock state
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+vs47OPLdNbVcHzyfBQHDyUjg0cFAl6tUikACgkQfBQHDyUj
 g0dGcw//ZIU2KARtc+IpMEPlId15gDuNXYfiC5c8yqGlGy7bfj853XecDjGWSWa3
 9Ouj1mZL2szGudzSKvQwIWXQNlf0nYTH1QvKJVRoiO9uiwrY9tse5hKd247lJzVh
 EH4PvZpk0gTXZcV4eM3LrQZV+lxJLnrJIlnmk4m8/HGtAa0hLXZpFEDJnwsLaVVL
 CLeJoPZpbDWEfmITdB622yAgnHMqSlra0jwBwhfNXtf22MkLGliHLveB0/IxWOal
 QR0r9b/9SGSBtxAYBq5BakgP0HuArKuoNyYw6C9Ve8w3Gq+enEPKiY+OPNN59zTQ
 86x9o3l0Zp6Bs0xoQEi1Ut8Iate5LEeJw47LfGvQZdDbg+h7CcbIoqEaLUfVmchz
 shwEoX1vPQehomJqmdolktxsBjYfYCpmPhp0c4vLNuNdVycAbS0x/sEAWc6HdP77
 f3BU5yk1FahHc9y7z7RQfdukD3eAFcjpv6Lk4xbpJcy0/6TPpYEznk6XU82c4iJZ
 LjYAxwUIibMhvjgJ12Ik9kEHP2or1wUNRg0wWLRI83ko+r6gXlemZH2mLOE04xz+
 kFxKnNWdCFKnTRMQtCa0+Y7TSuZEm7Gcep952hWgRu5+wAtEMWreub31QIRyuAj+
 fqKrpUzQtAQly4ToOYj0Ns5w87berbkhJG+fmHX/kgukdYWh104=
 =py+J
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:
 "Core:
   - Documentation typo fixes
   - fix the channel indexes
   - dmatest: fixes for process hang and iterations

  Drivers:
   - hisilicon: build error fix without PCI_MSI
   - ti-k3: deadlock fix
   - uniphier-xdmac: fix for reg region
   - pch: fix data race
   - tegra: fix clock state"

* tag 'dmaengine-fix-5.7-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dmatest: Fix process hang when reading 'wait' parameter
  dmaengine: dmatest: Fix iteration non-stop logic
  dmaengine: tegra-apb: Ensure that clock is enabled during of DMA synchronization
  dmaengine: fix channel index enumeration
  dmaengine: mmp_tdma: Reset channel error on release
  dmaengine: mmp_tdma: Do not ignore slave config validation errors
  dmaengine: pch_dma.c: Avoid data race between probe and irq handler
  dt-bindings: dma: uniphier-xdmac: switch to single reg region
  include/linux/dmaengine: Typos fixes in API documentation
  dmaengine: xilinx_dma: Add missing check for empty list
  dmaengine: ti: k3-psil: fix deadlock on error path
  dmaengine: hisilicon: Fix build error without PCI_MSI
2020-05-02 11:16:14 -07:00
Jia He 0b84103062 vhost: vsock: kick send_pkt worker once device is started
Ning Bo reported an abnormal 2-second gap when booting Kata container [1].
The unconditional timeout was caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of
connecting from the client side. The vhost vsock client tries to connect
an initializing virtio vsock server.

The abnormal flow looks like:
host-userspace           vhost vsock                       guest vsock
==============           ===========                       ============
connect()     -------->  vhost_transport_send_pkt_work()   initializing
   |                     vq->private_data==NULL
   |                     will not be queued
   V
schedule_timeout(2s)
                         vhost_vsock_start()  <---------   device ready
                         set vq->private_data

wait for 2s and failed
connect() again          vq->private_data!=NULL         recv connecting pkt

Details:
1. Host userspace sends a connect pkt, at that time, guest vsock is under
   initializing, hence the vhost_vsock_start has not been called. So
   vq->private_data==NULL, and the pkt is not been queued to send to guest
2. Then it sleeps for 2s
3. After guest vsock finishes initializing, vq->private_data is set
4. When host userspace wakes up after 2s, send connecting pkt again,
   everything is fine.

As suggested by Stefano Garzarella, this fixes it by additional kicking the
send_pkt worker in vhost_vsock_start once the virtio device is started. This
makes the pending pkt sent again.

After this patch, kata-runtime (with vsock enabled) boot time is reduced
from 3s to 1s on a ThunderX2 arm64 server.

[1] https://github.com/kata-containers/runtime/issues/1917

Reported-by: Ning Bo <n.b@live.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jia He <justin.he@arm.com>
Link: https://lore.kernel.org/r/20200501043840.186557-1-justin.he@arm.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2020-05-02 10:28:21 -04:00
Stefan Hajnoczi 90b5feb8c4 virtio-blk: handle block_device_operations callbacks after hot unplug
A userspace process holding a file descriptor to a virtio_blk device can
still invoke block_device_operations after hot unplug.  This leads to a
use-after-free accessing vblk->vdev in virtblk_getgeo() when
ioctl(HDIO_GETGEO) is invoked:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000090
  IP: [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio]
  PGD 800000003a92f067 PUD 3a930067 PMD 0
  Oops: 0000 [#1] SMP
  CPU: 0 PID: 1310 Comm: hdio-getgeo Tainted: G           OE  ------------   3.10.0-1062.el7.x86_64 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
  task: ffff9be5fbfb8000 ti: ffff9be5fa890000 task.ti: ffff9be5fa890000
  RIP: 0010:[<ffffffffc00e5450>]  [<ffffffffc00e5450>] virtio_check_driver_offered_feature+0x10/0x90 [virtio]
  RSP: 0018:ffff9be5fa893dc8  EFLAGS: 00010246
  RAX: ffff9be5fc3f3400 RBX: ffff9be5fa893e30 RCX: 0000000000000000
  RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffff9be5fbc10b40
  RBP: ffff9be5fa893dc8 R08: 0000000000000301 R09: 0000000000000301
  R10: 0000000000000000 R11: 0000000000000000 R12: ffff9be5fdc24680
  R13: ffff9be5fbc10b40 R14: ffff9be5fbc10480 R15: 0000000000000000
  FS:  00007f1bfb968740(0000) GS:ffff9be5ffc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000090 CR3: 000000003a894000 CR4: 0000000000360ff0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
   [<ffffffffc016ac37>] virtblk_getgeo+0x47/0x110 [virtio_blk]
   [<ffffffff8d3f200d>] ? handle_mm_fault+0x39d/0x9b0
   [<ffffffff8d561265>] blkdev_ioctl+0x1f5/0xa20
   [<ffffffff8d488771>] block_ioctl+0x41/0x50
   [<ffffffff8d45d9e0>] do_vfs_ioctl+0x3a0/0x5a0
   [<ffffffff8d45dc81>] SyS_ioctl+0xa1/0xc0

A related problem is that virtblk_remove() leaks the vd_index_ida index
when something still holds a reference to vblk->disk during hot unplug.
This causes virtio-blk device names to be lost (vda, vdb, etc).

Fix these issues by protecting vblk->vdev with a mutex and reference
counting vblk so the vd_index_ida index can be removed in all cases.

Fixes: 48e4043d45 ("virtio: add virtio disk geometry feature")
Reported-by: Lance Digby <ldigby@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200430140442.171016-1-stefanha@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2020-05-02 10:28:13 -04:00
Linus Torvalds 690e2aba7b VFIO fixes for v5.7-rc4
- copy_*_user validity check for new vfio_dma_rw interface (Yan Zhao)
 
  - Fix a potential math overflow (Yan Zhao)
 
  - Use follow_pfn() for calculating PFNMAPs (Sean Christopherson)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJerJjWAAoJECObm247sIsiznwQAIQZomwMfN5lj1Wf5PNCOpVk
 T9gSl9ctbzu/hjOo24NLGUw/yUG7tBVjj08IH7pNTk8Yo2dew2l2bcei1tdxX8SB
 2tRqb6tZvrZplW6WAmrakQubx/oawsHgmcMwxDXatvsbpXopKdSaNfqY8UZZc4kv
 c2QYpIgDyoHZmwkHE9OL/WUyXXHpVT12SwWXy+kXuhV6yXMLIREWlC+L574CnzXz
 VvaIBgS9j9LEL8/4a1sU2HcwarFANrnmHF5+Bl3Fk5fjGF+LJRXgdNil3ppgfsVv
 iQJ3vZ8YCES2q+rYblk374qerXtK5fh1dYh4XyOUbzkDfk9/8EsAqrUZzF64BqwN
 ejThC2IvUWVCD8umZ4DiVvIm9+rBqG0Pvjq4QrGW4ULEFhGeifGrxP2BBs+8XwUZ
 mLRJ6kubcXxBdfgkwfGYFbFWI/gB+1QZLqSsy3uFX0WkIYYMLIDgssvJZ0EEJrYE
 wdWolU+h9ufboNe6v2gGfOW8I5VihFfffkDSAgIWi0pa9KTuO+s8yf8U5jtc88Rd
 ekTZixRGs+J75AXOdSjuPT2UGgtlggJkOmZiiDR4Hx6MpLZSwaivN2adXGSfdM80
 pCYiexxorKd7G7DTce7AC9xVms7drVYjIACi8ip63BDYiBzxr/sATJHP70YFPYdl
 8fSO9wDTrcRfGvTcumeE
 =L+OC
 -----END PGP SIGNATURE-----

Merge tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio

Pull VFIO fixes from Alex Williamson:

 - copy_*_user validity check for new vfio_dma_rw interface (Yan Zhao)

 - Fix a potential math overflow (Yan Zhao)

 - Use follow_pfn() for calculating PFNMAPs (Sean Christopherson)

* tag 'vfio-v5.7-rc4' of git://github.com/awilliam/linux-vfio:
  vfio/type1: Fix VA->PA translation for PFNMAP VMAs in vaddr_get_pfn()
  vfio: avoid possible overflow in vfio_iommu_type1_pin_pages
  vfio: checking of validity of user vaddr in vfio_dma_rw
2020-05-01 17:19:15 -07:00
Linus Torvalds 42eb62d417 - Add -fasynchronous-unwind-tables to the vDSO CFLAGS.
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl6sdusACgkQa9axLQDI
 XvGXMQ/+I9s0+VazDj3p7zV5deF0Y7V5wIViDNVRAw/nUn+EQd3UGPqXlrqaQIIU
 /B5NQyRmp17o0gA6GlPQ7DIT0rZE3tHMwvNEE7qJmfvm/ZCR0X3Rs4VOhiRzMT/L
 hJ3lTVoQnItWyWER60Uo+ldSxVkZ2Hj1TLXxLsgMOYOHwzSWe0UB2ItIANbmHBF8
 DqFBNerXmGhu7lS4HGBFUzrlH5S6bnZzanSU8WxICIioNMKMJgHWuHAPuE8+4U/a
 uif3cjfZDnnnci/sTPHDJtEEm3cbbRes/4BNhafnN9F0Yo3cvphpakPNMkQeyClX
 ST5ArJYQgjzuQ7rgzxC3UU7P7AyMF9Elx51DsgMujaeogCWOg8DUdHlSurAWgyyM
 7ugZAVHd0T4jCMulLkZ/LZ7delPXjEFFSNsUu02p6ekNZWlfewvwdVtJi4RsIT0y
 YDFRrvc/JZ4rAkwPNIWMUbKADeLNfS4BSngbfrDtndV9TwJZyr5sIlzI3d01ATYy
 B9E5sHO+tqPCSc7nptfnTNKWH/ojaJPx1jcm/OiJKEx9AjKqZt0W21ol3BanI3af
 91VV29z/l3+JO+QQWlWluWeWTI3Kc+UGTCBwh/4+nGX2thbqZzINzzhWDKsf58LW
 wU4TAQeCbPcxkUlFAs0Z8eQV52XICvt+XWkFcTf5ZWRAI+gR/rE=
 =CTHq
 -----END PGP SIGNATURE-----

Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 fix from Catalin Marinas:
 "Add -fasynchronous-unwind-tables to the vDSO CFLAGS"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: vdso: Add -fasynchronous-unwind-tables to cflags
2020-05-01 17:09:31 -07:00
Linus Torvalds cf0185308c io_uring-5.7-2020-05-01
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl6spz8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpjHjEACp2V+14XpWl1F6rJpLSq0BJZ3wCReqj7it
 tPImiZsx3fLiwslW8IFrDuT1tyCpODOECSA87vXebHjHvgmrbDayrAUJXlyYSk0N
 +zwXTg7wH9XQ0CEQbzPIA/DK3evJ/CqRgTAa8r/ZIdm1sx8jIyq2QrwAo9IX7YyG
 mQttrm37C4RrzU2dqcp0aBFhmiC6GRI34IYNK6idJ3wUFOCAg1Ur3veX9aG94gaV
 cA1P12sSYnIAIAxUko/siPIvtJJ9s1tLJ6UREpqUMzgrfSEhZTPRvyv8xQLmTIl1
 BcFj7Y3iorGde5PQUEPYoW7GXydU1LefJLH1C8GAbwRO1YyPD78Rff0sV8Bi0y9Z
 hLnnvc7GEII/z0yxqnasEYYlWxhAcusO7HQDf1NMsxfuNXy5ofn1Kfuk5FFEcvj+
 AjqvpN+sfJ9GPHrAGNT06kTMV0imCEmxuEanEc7cg1c2nfH4mJqt/vbH9tyD0aFk
 JBuOeXToYywRqHHGSGcHGPkClcDoAw6dXqqKdJj6i0ya+EIsP2Ztp40Ae9yCDqew
 AhrYQuEsJ7WJvxjogKn8fX8GSRnOJF1jb54pcNffw/e5q04e5YG/ACII+W/L1nPB
 81BDcQjzB+f6xNxDZFGh0tQKvuVDe8b//vY+g2v6YoJYcAkLUSjy2FJDpoBjhzUu
 03mYIP8kAg==
 =cZOE
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:

 - Fix for statx not grabbing the file table, making AT_EMPTY_PATH fail

 - Cover a few cases where async poll can handle retry, eliminating the
   need for an async thread

 - fallback request busy/free fix (Bijan)

 - syzbot reported SQPOLL thread exit fix for non-preempt (Xiaoguang)

 - Fix extra put of req for sync_file_range (Pavel)

 - Always punt splice async. We'll improve this for 5.8, but wanted to
   eliminate the inode mutex lock from the non-blocking path for 5.7
   (Pavel)

* tag 'io_uring-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
  io_uring: punt splice async because of inode mutex
  io_uring: check non-sync defer_list carefully
  io_uring: fix extra put in sync_file_range()
  io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()
  io_uring: use proper references for fallback_req locking
  io_uring: only force async punt if poll based retry can't handle it
  io_uring: enable poll retry for any file with ->read_iter / ->write_iter
  io_uring: statx must grab the file table for valid fd
2020-05-01 17:03:06 -07:00
Arnd Bergmann dc30b4059f drop_monitor: work around gcc-10 stringop-overflow warning
The current gcc-10 snapshot produces a false-positive warning:

net/core/drop_monitor.c: In function 'trace_drop_common.constprop':
cc1: error: writing 8 bytes into a region of size 0 [-Werror=stringop-overflow=]
In file included from net/core/drop_monitor.c:23:
include/uapi/linux/net_dropmon.h:36:8: note: at offset 0 to object 'entries' with size 4 declared here
   36 |  __u32 entries;
      |        ^~~~~~~

I reported this in the gcc bugzilla, but in case it does not get
fixed in the release, work around it by using a temporary variable.

Fixes: 9a8afc8d39 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94881
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 15:45:16 -07:00
Yoshiyuki Kurauchi 846c68f7f1 gtp: set NLM_F_MULTI flag in gtp_genl_dump_pdp()
In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI
flag since it returns multipart message.
This patch adds a new arg "flags" in gtp_genl_fill_info() so that
flags can be set by the callers.

Signed-off-by: Yoshiyuki Kurauchi <ahochauwaaaaa@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 15:34:09 -07:00
Jules Irenge cae9566acb cxgb4: Add missing annotation for service_ofldq()
Sparse reports a warning at service_ofldq()

warning: context imbalance in service_ofldq() - unexpected unlock

The root cause is the missing annotation at service_ofldq()

Add the missing __must_hold(&q->sendq.lock) annotation

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 15:31:37 -07:00
Jacob Keller 709e7158f0 ice: cleanup language in ice.rst for fw.app
The documentation for the ice driver around "fw.app" has a spelling
mistake in variation. Additionally, the language of "shall have a unique
name" sounds like a requirement. Reword this to read more like
a description or property.

Reported-by: Benjamin Fisher <benjamin.l.fisher@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 15:30:24 -07:00
Clay McClure b6d49cab44 net: Make PTP-specific drivers depend on PTP_1588_CLOCK
Commit d1cbfd771c ("ptp_clock: Allow for it to be optional") changed
all PTP-capable Ethernet drivers from `select PTP_1588_CLOCK` to `imply
PTP_1588_CLOCK`, "in order to break the hard dependency between the PTP
clock subsystem and ethernet drivers capable of being clock providers."
As a result it is possible to build PTP-capable Ethernet drivers without
the PTP subsystem by deselecting PTP_1588_CLOCK. Drivers are required to
handle the missing dependency gracefully.

Some PTP-capable Ethernet drivers (e.g., TI_CPSW) factor their PTP code
out into separate drivers (e.g., TI_CPTS_MOD). The above commit also
changed these PTP-specific drivers to `imply PTP_1588_CLOCK`, making it
possible to build them without the PTP subsystem. But as Grygorii
Strashko noted in [1]:

On Wed, Apr 22, 2020 at 02:16:11PM +0300, Grygorii Strashko wrote:

> Another question is that CPTS completely nonfunctional in this case and
> it was never expected that somebody will even try to use/run such
> configuration (except for random build purposes).

In my view, enabling a PTP-specific driver without the PTP subsystem is
a configuration error made possible by the above commit. Kconfig should
not allow users to create a configuration with missing dependencies that
results in "completely nonfunctional" drivers.

I audited all network drivers that call ptp_clock_register() but merely
`imply PTP_1588_CLOCK` and found five PTP-specific drivers that are
likely nonfunctional without PTP_1588_CLOCK:

    NET_DSA_MV88E6XXX_PTP
    NET_DSA_SJA1105_PTP
    MACB_USE_HWSTAMP
    CAVIUM_PTP
    TI_CPTS_MOD

Note how these symbols all reference PTP or timestamping in their name;
this is a clue that they depend on PTP_1588_CLOCK.

Change them from `imply PTP_1588_CLOCK` [2] to `depends on PTP_1588_CLOCK`.
I'm not using `select PTP_1588_CLOCK` here because PTP_1588_CLOCK has
its own dependencies, which `select` would not transitively apply.

Additionally, remove the `select NET_PTP_CLASSIFY` from CPTS_TI_MOD;
PTP_1588_CLOCK already selects that.

[1]: https://lore.kernel.org/lkml/c04458ed-29ee-1797-3a11-7f3f560553e6@ti.com/

[2]: NET_DSA_SJA1105_PTP had never declared any type of dependency on
PTP_1588_CLOCK (`imply` or otherwise); adding a `depends on PTP_1588_CLOCK`
here seems appropriate.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: d1cbfd771c ("ptp_clock: Allow for it to be optional")
Signed-off-by: Clay McClure <clay@daemons.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 15:27:51 -07:00
Jakub Kicinski 610a9346c1 devlink: fix return value after hitting end in region read
Commit d5b90e99e1 ("devlink: report 0 after hitting end in region read")
fixed region dump, but region read still returns a spurious error:

$ devlink region read netdevsim/netdevsim1/dummy snapshot 0 addr 0 len 128
0000000000000000 a6 f4 c4 1c 21 35 95 a6 9d 34 c3 5b 87 5b 35 79
0000000000000010 f3 a0 d7 ee 4f 2f 82 7f c6 dd c4 f6 a5 c3 1b ae
0000000000000020 a4 fd c8 62 07 59 48 03 70 3b c7 09 86 88 7f 68
0000000000000030 6f 45 5d 6d 7d 0e 16 38 a9 d0 7a 4b 1e 1e 2e a6
0000000000000040 e6 1d ae 06 d6 18 00 85 ca 62 e8 7e 11 7e f6 0f
0000000000000050 79 7e f7 0f f3 94 68 bd e6 40 22 85 b6 be 6f b1
0000000000000060 af db ef 5e 34 f0 98 4b 62 9a e3 1b 8b 93 fc 17
devlink answers: Invalid argument
0000000000000070 61 e8 11 11 66 10 a5 f7 b1 ea 8d 40 60 53 ed 12

This is a minimal fix, I'll follow up with a restructuring
so we don't have two checks for the same condition.

Fixes: fdd41ec21e ("devlink: Return right error code in case of errors for region read")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 15:25:35 -07:00
Nathan Chancellor 7fdc66debe hv_netvsc: Fix netvsc_start_xmit's return type
netvsc_start_xmit is used as a callback function for the ndo_start_xmit
function pointer. ndo_start_xmit's return type is netdev_tx_t but
netvsc_start_xmit's return type is int.

This causes a failure with Control Flow Integrity (CFI), which requires
function pointer prototypes and callback function definitions to match
exactly. When CFI is in enforcing, the kernel panics. When booting a
CFI kernel with WSL 2, the VM is immediately terminated because of this.

The splat when CONFIG_CFI_PERMISSIVE is used:

[    5.916765] CFI failure (target: netvsc_start_xmit+0x0/0x10):
[    5.916771] WARNING: CPU: 8 PID: 0 at kernel/cfi.c:29 __cfi_check_fail+0x2e/0x40
[    5.916772] Modules linked in:
[    5.916774] CPU: 8 PID: 0 Comm: swapper/8 Not tainted 5.7.0-rc3-next-20200424-microsoft-cbl-00001-ged4eb37d2c69-dirty #1
[    5.916776] RIP: 0010:__cfi_check_fail+0x2e/0x40
[    5.916777] Code: 48 c7 c7 70 98 63 a9 48 c7 c6 11 db 47 a9 e8 69 55 59 00 85 c0 75 02 5b c3 48 c7 c7 73 c6 43 a9 48 89 de 31 c0 e8 12 2d f0 ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 00 cc cc 00 00 85 f6 74 25
[    5.916778] RSP: 0018:ffffa803c0260b78 EFLAGS: 00010246
[    5.916779] RAX: 712a1af25779e900 RBX: ffffffffa8cf7950 RCX: ffffffffa962cf08
[    5.916779] RDX: ffffffffa9c36b60 RSI: 0000000000000082 RDI: ffffffffa9c36b5c
[    5.916780] RBP: ffff8ffc4779c2c0 R08: 0000000000000001 R09: ffffffffa9c3c300
[    5.916781] R10: 0000000000000151 R11: ffffffffa9c36b60 R12: ffff8ffe39084000
[    5.916782] R13: ffffffffa8cf7950 R14: ffffffffa8d12cb0 R15: ffff8ffe39320140
[    5.916784] FS:  0000000000000000(0000) GS:ffff8ffe3bc00000(0000) knlGS:0000000000000000
[    5.916785] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    5.916786] CR2: 00007ffef5749408 CR3: 00000002f4f5e000 CR4: 0000000000340ea0
[    5.916787] Call Trace:
[    5.916788]  <IRQ>
[    5.916790]  __cfi_check+0x3ab58/0x450e0
[    5.916793]  ? dev_hard_start_xmit+0x11f/0x160
[    5.916795]  ? sch_direct_xmit+0xf2/0x230
[    5.916796]  ? __dev_queue_xmit.llvm.11471227737707190958+0x69d/0x8e0
[    5.916797]  ? neigh_resolve_output+0xdf/0x220
[    5.916799]  ? neigh_connected_output.cfi_jt+0x8/0x8
[    5.916801]  ? ip6_finish_output2+0x398/0x4c0
[    5.916803]  ? nf_nat_ipv6_out+0x10/0xa0
[    5.916804]  ? nf_hook_slow+0x84/0x100
[    5.916807]  ? ip6_input_finish+0x8/0x8
[    5.916807]  ? ip6_output+0x6f/0x110
[    5.916808]  ? __ip6_local_out.cfi_jt+0x8/0x8
[    5.916810]  ? mld_sendpack+0x28e/0x330
[    5.916811]  ? ip_rt_bug+0x8/0x8
[    5.916813]  ? mld_ifc_timer_expire+0x2db/0x400
[    5.916814]  ? neigh_proxy_process+0x8/0x8
[    5.916816]  ? call_timer_fn+0x3d/0xd0
[    5.916817]  ? __run_timers+0x2a9/0x300
[    5.916819]  ? rcu_core_si+0x8/0x8
[    5.916820]  ? run_timer_softirq+0x14/0x30
[    5.916821]  ? __do_softirq+0x154/0x262
[    5.916822]  ? native_x2apic_icr_write+0x8/0x8
[    5.916824]  ? irq_exit+0xba/0xc0
[    5.916825]  ? hv_stimer0_vector_handler+0x99/0xe0
[    5.916826]  ? hv_stimer0_callback_vector+0xf/0x20
[    5.916826]  </IRQ>
[    5.916828]  ? hv_stimer_global_cleanup.cfi_jt+0x8/0x8
[    5.916829]  ? raw_setsockopt+0x8/0x8
[    5.916830]  ? default_idle+0xe/0x10
[    5.916832]  ? do_idle.llvm.10446269078108580492+0xb7/0x130
[    5.916833]  ? raw_setsockopt+0x8/0x8
[    5.916833]  ? cpu_startup_entry+0x15/0x20
[    5.916835]  ? cpu_hotplug_enable.cfi_jt+0x8/0x8
[    5.916836]  ? start_secondary+0x188/0x190
[    5.916837]  ? secondary_startup_64+0xa5/0xb0
[    5.916838] ---[ end trace f2683fa869597ba5 ]---

Avoid this by using the right return type for netvsc_start_xmit.

Fixes: fceaf24a94 ("Staging: hv: add the Hyper-V virtual network driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1009
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 15:24:46 -07:00
David S. Miller 384649e79e Merge branch 'WoL-fixes-for-DP83822-and-DP83tc811'
Dan Murphy says:

====================
WoL fixes for DP83822 and DP83tc811

The WoL feature for each device was enabled during boot or when the PHY was
brought up which may be undesired.  These patches disable the WoL in the
config_init.  The disabling and enabling of the WoL is now done though the
set_wol call.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 15:23:44 -07:00
Dan Murphy 6c599044b0 net: phy: DP83TC811: Fix WoL in config init to be disabled
The WoL feature should be disabled when config_init is called and the
feature should turned on or off  when set_wol is called.

In addition updated the calls to modify the registers to use the set_bit
and clear_bit function calls.

Fixes: 6d749428788b ("net: phy: DP83TC811: Introduce support for the
DP83TC811 phy")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 15:23:44 -07:00
Dan Murphy 600ac36b53 net: phy: DP83822: Fix WoL in config init to be disabled
The WoL feature should be disabled when config_init is called and the
feature should turned on or off  when set_wol is called.

In addition updated the calls to modify the registers to use the set_bit
and clear_bit function calls.

Fixes: 3b427751a9d0 ("net: phy: DP83822 initial driver submission")
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 15:23:44 -07:00
David Ahern 8f34e53b60 ipv6: Use global sernum for dst validation with nexthop objects
Nik reported a bug with pcpu dst cache when nexthop objects are
used illustrated by the following:
    $ ip netns add foo
    $ ip -netns foo li set lo up
    $ ip -netns foo addr add 2001:db8:11::1/128 dev lo
    $ ip netns exec foo sysctl net.ipv6.conf.all.forwarding=1
    $ ip li add veth1 type veth peer name veth2
    $ ip li set veth1 up
    $ ip addr add 2001:db8:10::1/64 dev veth1
    $ ip li set dev veth2 netns foo
    $ ip -netns foo li set veth2 up
    $ ip -netns foo addr add 2001:db8:10::2/64 dev veth2
    $ ip -6 nexthop add id 100 via 2001:db8:10::2 dev veth1
    $ ip -6 route add 2001:db8:11::1/128 nhid 100

    Create a pcpu entry on cpu 0:
    $ taskset -a -c 0 ip -6 route get 2001:db8:11::1

    Re-add the route entry:
    $ ip -6 ro del 2001:db8:11::1
    $ ip -6 route add 2001:db8:11::1/128 nhid 100

    Route get on cpu 0 returns the stale pcpu:
    $ taskset -a -c 0 ip -6 route get 2001:db8:11::1
    RTNETLINK answers: Network is unreachable

    While cpu 1 works:
    $ taskset -a -c 1 ip -6 route get 2001:db8:11::1
    2001:db8:11::1 from :: via 2001:db8:10::2 dev veth1 src 2001:db8:10::1 metric 1024 pref medium

Conversion of FIB entries to work with external nexthop objects
missed an important difference between IPv4 and IPv6 - how dst
entries are invalidated when the FIB changes. IPv4 has a per-network
namespace generation id (rt_genid) that is bumped on changes to the FIB.
Checking if a dst_entry is still valid means comparing rt_genid in the
rtable to the current value of rt_genid for the namespace.

IPv6 also has a per network namespace counter, fib6_sernum, but the
count is saved per fib6_node. With the per-node counter only dst_entries
based on fib entries under the node are invalidated when changes are
made to the routes - limiting the scope of invalidations. IPv6 uses a
reference in the rt6_info, 'from', to track the corresponding fib entry
used to create the dst_entry. When validating a dst_entry, the 'from'
is used to backtrack to the fib6_node and check the sernum of it to the
cookie passed to the dst_check operation.

With the inline format (nexthop definition inline with the fib6_info),
dst_entries cached in the fib6_nh have a 1:1 correlation between fib
entries, nexthop data and dst_entries. With external nexthops, IPv6
looks more like IPv4 which means multiple fib entries across disparate
fib6_nodes can all reference the same fib6_nh. That means validation
of dst_entries based on external nexthops needs to use the IPv4 format
- the per-network namespace counter.

Add sernum to rt6_info and set it when creating a pcpu dst entry. Update
rt6_get_cookie to return sernum if it is set and update dst_check for
IPv6 to look for sernum set and based the check on it if so. Finally,
rt6_get_pcpu_route needs to validate the cached entry before returning
a pcpu entry (similar to the rt_cache_valid calls in __mkroute_input and
__mkroute_output for IPv4).

This problem only affects routes using the new, external nexthops.

Thanks to the kbuild test robot for catching the IS_ENABLED needed
around rt_genid_ipv6 before I sent this out.

Fixes: 5b98324ebe ("ipv6: Allow routes to use nexthop objects")
Reported-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-01 12:46:30 -07:00
Linus Torvalds 052c467cb5 block-5.7-2020-05-01
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl6sTh8QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgputfD/9QTTwtO6QusZSy2Om7iEg4L78ZF1SVAig5
 +BIXBWHxtc8oT2HhSvtvvHET09liLOcni6cNmIgvItJURIXvG5TALYCF64Lcap7l
 FA0Dnw/h2OvLso74U3y/4wOsT7GGfoGG5QFKw1vKjCDARBBciom/I6/7xLJANZXh
 4yrAX/OADT5O2Go4n9gedw+8LkSMeLbftTxM4UTJmWnJ/7lAtbNNswPav0lMmRny
 +zJbEUKb2CMEZiyM7ln8gmpLPue9SzRWFWC8lR/8lKSNBMsaKiNszRx8zFmU8pRN
 dCpOGax+hHfJzeNjwHk/lZisA6sRd9iLI55wxBTJEJTsp3XnQQpRJroa1oELKwq2
 sy7yuMSHydbBbt1ZxTBALOkjz4AFszKp9Dz8AuvuYfQmZ7XHbAPFSg5hD5rYFLLI
 orAwg5wV1lgbYJLHROQcWqXWA1AVFXjRhg0EO7DFtDunjjCkzjdi10W0GtvPZ6Bg
 /9esHscHK7JiQw5/NhL7iJ99fpZt5tvG4JiCFxtLo1NY+T8mZwJQLJil1+jJidCO
 cezOdX81A4yFrNn/cpk1rzTnrCo4iSMogwDzTE4K0Sk6zFCTaNVNb57PjcQ0/Dto
 ybPrgu86Qihvl/HX+5fLMC2SgjmNKo1lwvoH2zrVMVW3Zsuu1qmsMMf2mORpPZuz
 4FdKlRACIQ==
 =hQ0f
 -----END PGP SIGNATURE-----

Merge tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A few fixes for this release:

   - NVMe pull request from Christoph, with a single fix for a double
     free in the namespace error handling.

   - Kill the bd_openers check in blk_drop_partitions(), fixing a
     regression in this merge window (Christoph)"

* tag 'block-5.7-2020-05-01' of git://git.kernel.dk/linux-block:
  block: remove the bd_openers checks in blk_drop_partitions
  nvme: prevent double free in nvme_alloc_ns() error handling
2020-05-01 11:13:36 -07:00
Linus Torvalds ab386c46e4 Merge branch 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
 "Three driver bugfixes, and two reverts because the original patches
  revealed underlying problems which the Tegra guys are now working on"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: aspeed: Avoid i2c interrupt status clear race condition.
  i2c: amd-mp2-pci: Fix Oops in amd_mp2_pci_init() error handling
  Revert "i2c: tegra: Better handle case where CPU0 is busy for a long time"
  Revert "i2c: tegra: Synchronize DMA before termination"
  i2c: iproc: generate stop event for slave writes
2020-05-01 11:10:09 -07:00
Linus Torvalds c536419022 sound fixes for 5.7-rc4
Just a collection of small fixes around this time.
 
 - One more try for fixing PCM OSS regression
 
 - HD-audio: a new quirk for Lenovo, the improved driver blacklisting,
   a lock fix in the minor error path, and a fix for the possible race
   at monitor notifiaction
 
 - USB-audio: a quirk ID fix, a fix for POD HD500 workaround
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAl6qzCoOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE92lRAAt9JkZ9s4F2qdi638wtltFfAENW6HBrlCQS/w
 7XGdg82Y034eXNXL2cTjjBpmGrQ/NJ2ffCsxRk+OZ0cONltAYdcuUL86xWI/mPT/
 sE4ccj+QHra10ml9ESwYJfyKJgIvOAcoiNYdeGQFsGTBOS+Q10o5aEPSvMEBBUQS
 xUxjqtsILwmGGPxEJcKhtLn7Qtd+GV7dR4ERmHqstl3crg5lWcmqO2Aki/l8Ge7x
 Y7Ep42v/Nlw3ECkpsNlGdF4MCY8PwQgJfHsKAIBw+EWXQSSeNxxH8eWF/oLwAMvl
 btZBFic40mvuCfwJbYNwOK3wevQNI4vQsYKgttcs0xL7kwkv8FAo1Rq4CHDP0xuZ
 5zIJVnUrpEDuA3i1t+k7ZNL/n9Yg7koJ5jkiuR5l1Dc7fyoiu2k3p+Rz0YMHi2j2
 dA2QWko0xv8zPq4zzr5SGql17//8tdDqcaGkiPj0/UZtk6F5pibmCUG9b+9il6Wj
 VS9o5KbK9PH5lvc7dd8AqkQTwNkMXbg75jDyAKVp+r6KL3zfBDGqw1wyvb3TVZdQ
 Rd6VEDd5xLFZ2TeXGXsfQzg+hdm6i97zGmzZhkw2sIBKeR+o4fft88MO9MjDX+CR
 1pp1ba5IARQqFIRpJUXDI4m7TVwr4Z8oCkPbqkvAogYQvjSGFINnSMMajrPjmFY2
 9OXvMvM=
 =ePLE
 -----END PGP SIGNATURE-----

Merge tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Just a collection of small fixes around this time:

   - One more try for fixing PCM OSS regression

   - HD-audio: a new quirk for Lenovo, the improved driver blacklisting,
     a lock fix in the minor error path, and a fix for the possible race
     at monitor notifiaction

   - USB-audio: a quirk ID fix, a fix for POD HD500 workaround"

* tag 'sound-5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Correct a typo of NuPrime DAC-10 USB ID
  ALSA: opti9xx: shut up gcc-10 range warning
  ALSA: hda/hdmi: fix without unlocked before return
  ALSA: hda/hdmi: fix race in monitor detection during probe
  ALSA: hda/realtek - Two front mics on a Lenovo ThinkCenter
  ALSA: line6: Fix POD HD500 audio playback
  ALSA: pcm: oss: Place the plugin buffer overflow checks correctly (for 5.7)
  ALSA: pcm: oss: Place the plugin buffer overflow checks correctly
  ALSA: hda: Match both PCI ID and SSID for driver blacklist
2020-05-01 11:05:28 -07:00
Linus Torvalds 477bfeb9a3 drm fixes for 5.7-rc4
core:
 - EDID off by one DTD fix
 - DP mst write return code fix
 
 dma-buf:
 - fix SET_NAME ioctl uapi
 - doc fixes
 
 amdgpu:
 - Fix a green screen on resume issue
 - PM fixes for SR-IOV
  SDMA fix for navi
 - Renoir display fixes
 - Cursor and pageflip stuttering fixes
 - Misc additional display fixes
 - (uapi) Add additional DCC tiling flags for navi1x
 
 i915:
 - Fix selftest refcnt leak (Xiyu)
 - Fix gem vma lock (Chris)
 - Fix gt's i915_request.timeline acquire by checking if cacheline is valid (Chris)
 - Fix IRQ postinistall fault masks (Matt)
 
 qxl:
 - use after gree fix
 - fix lost kunmap
 - release leak fix
 
 virtio:
 - context destruction fix
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJeq5AAAAoJEAx081l5xIa+Id8P/0JLdvrRpHkJgTKwZq2ZDXYn
 fSfEuj5TUnIeRX4G6Z8KOuKEZwCNL3NdCfDhg3WGhpZ1MBoYEfOOOgejRKeS3UrG
 ziY+zoxaZIVFpS30TC5XiWO79RjW8dJDJogF5XgBcm26aX2j27dzzaHeJZtdAjrS
 HTKZgneYd3+B7Aa/UfZmQinHKXee0AykM/gJNbqPqp4FPSHdfEEwn72MmVHyTh1H
 zrtmzC4tVx7mHbUlwrZCPUJQcbxVuA9E0bmsk8K1xDtnI1r/lB5LldkvV/HjaI9x
 b5VEAMRoBjgZOqaXC+C/RLBIh8eP4drcKXfjt4MMCXIB6IpqEcr54wVnC7JTA4KF
 pCYa3UChnmYceqAW+Yz+37F7PbWvfWnA4YQTWR4JwG+42rbR4nc6pRAh2HHCLPGR
 M+ZiqSOYs0/ROdR2nzD2XsUjSYFksjLGCpyq2OqqOkhm6kbF8eZsL2Rxj9VPwHLk
 PJhVR/d3Kc7fQpgbEeDvf/4jFlkodNv1/FauIpWRmXtt4WJM/vKPWwx80WvekhNh
 IOqTrVW3XOZM2XYXVw/xSebBVMbs4+PtO1hRmaA5+yJwQNqU2rc6qLptUVxpib6/
 Gwxyp8Wb+7K4vIC8+5QrcKaYByiLBiaFNTIH5vo6vUv/FZHo9veZaiMqKxBptCRq
 LWONsaxPQqpdHSc/R25Q
 =4eA4
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Regular scheduled fixes for graphics. Nothing to extreme bunch of
  amdgpu fixes, i915 and qxl fixes, along with some misc ones.

  All seems to be progressing normally.

  core:
   - EDID off by one DTD fix
   - DP mst write return code fix

  dma-buf:
   - fix SET_NAME ioctl uapi
   - doc fixes

  amdgpu:
   - Fix a green screen on resume issue
   - PM fixes for SR-IOV SDMA fix for navi
   - Renoir display fixes
   - Cursor and pageflip stuttering fixes
   - Misc additional display fixes
   - (uapi) Add additional DCC tiling flags for navi1x

  i915:
   - Fix selftest refcnt leak (Xiyu)
   - Fix gem vma lock (Chris)
   - Fix gt's i915_request.timeline acquire by checking if cacheline is
     valid (Chris)
   - Fix IRQ postinistall fault masks (Matt)

  qxl:
   - use after gree fix
   - fix lost kunmap
   - release leak fix

  virtio:
   - context destruction fix"

* tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm: (26 commits)
  dma-buf: fix documentation build warnings
  drm/qxl: qxl_release use after free
  drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()
  drm/i915: Use proper fault mask in interrupt postinstall too
  drm/amd/display: Use cursor locking to prevent flip delays
  drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1
  drm/amd/display: Defer cursor update around VUPDATE for all ASIC
  drm/amd/display: fix rn soc bb update
  drm/amd/display: check if REFCLK_CNTL register is present
  drm/amdgpu: bump version for invalidate L2 before SDMA IBs
  drm/amdgpu: invalidate L2 before SDMA IBs (v2)
  drm/amdgpu: add tiling flags from Mesa
  drm/amd/powerplay: avoid using pm_en before it is initialized revised
  Revert "drm/amd/powerplay: avoid using pm_en before it is initialized"
  drm/qxl: qxl_release leak in qxl_hw_surface_alloc()
  drm/qxl: qxl_release leak in qxl_draw_dirty_fb()
  drm/virtio: only destroy created contexts
  drm/dp_mst: Fix drm_dp_send_dpcd_write() return code
  drm/i915/gt: Check cacheline is valid before acquiring
  drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()
  ...
2020-05-01 11:01:51 -07:00
Linus Torvalds cebcff3a1c SCSI fixes on 20200430
Four minor fixes: three in drivers and one in the core.  The core one
 allows an additional state change that fixes a regression introduced
 by an update to the aacraid driver in the previous merge window.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXquFjyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishSooAQCdPJNC
 K9x3+/1APfHlbLSAE2yK+KRsIsEuJgczaSXOigD+Lk/vHuwBWJB/eO5lIaIKw+n5
 Lggev6IimeCQb6mThG8=
 =133j
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Four minor fixes: three in drivers and one in the core.

  The core one allows an additional state change that fixes a regression
  introduced by an update to the aacraid driver in the previous merge
  window"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target/iblock: fix WRITE SAME zeroing
  scsi: qla2xxx: check UNLOADING before posting async work
  scsi: qla2xxx: set UNLOADING before waiting for session deletion
  scsi: core: Allow the state change from SDEV_QUIESCE to SDEV_BLOCK
2020-05-01 11:00:07 -07:00
Thomas Gleixner c84cb3735f x86/apic: Move TSC deadline timer debug printk
Leon reported that the printk_once() in __setup_APIC_LVTT() triggers a
lockdep splat due to a lock order violation between hrtimer_base::lock and
console_sem, when the 'once' condition is reset via
/sys/kernel/debug/clear_warn_once after boot.

The initial printk cannot trigger this because that happens during boot
when the local APIC timer is set up on the boot CPU.

Prevent it by moving the printk to a place which is guaranteed to be only
called once during boot.

Mark the deadline timer check related functions and data __init while at
it.

Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87y2qhoshi.fsf@nanos.tec.linutronix.de
2020-05-01 19:15:41 +02:00
Konstantin Khlebnikov fdc63ff0e4 ftrace/x86: Fix trace event registration for syscalls without arguments
The refactoring of SYSCALL_DEFINE0() macros removed the ABI stubs and
simply defines __abi_sys_$NAME as alias of __do_sys_$NAME.

As a result kallsyms_lookup() returns "__do_sys_$NAME" which does not match
with the declared trace event name.

See also commit 1c758a2202 ("tracing/x86: Update syscall trace events to
handle new prefixed syscall func names").

Add __do_sys_ to the valid prefixes which are checked in
arch_syscall_match_sym_name().

Fixes: d2b5de495e ("x86/entry: Refactor SYSCALL_DEFINE0 macros")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lkml.kernel.org/r/158636958997.7900.16485049455470033557.stgit@buzz
2020-05-01 19:15:40 +02:00
Shuah Khan 66d69e081b selftests: fix kvm relocatable native/cross builds and installs
kvm test Makefile doesn't fully support cross-builds and installs.
UNAME_M = $(shell uname -m) variable is used to define the target
programs and libraries to be built from arch specific sources in
sub-directories.

For cross-builds to work, UNAME_M has to map to ARCH and arch specific
directories and targets in this Makefile.

UNAME_M variable to used to run the compiles pointing to the right arch
directories and build the right targets for these supported architectures.

TEST_GEN_PROGS and LIBKVM are set using UNAME_M variable.
LINUX_TOOL_ARCH_INCLUDE is set using ARCH variable.

x86_64 targets are named to include x86_64 as a suffix and directories
for includes are in x86_64 sub-directory. s390x and aarch64 follow the
same convention. "uname -m" doesn't result in the correct mapping for
s390x and aarch64. Fix it to set UNAME_M correctly for s390x and aarch64
cross-builds.

In addition, Makefile doesn't create arch sub-directories in the case of
relocatable builds and test programs under s390x and x86_64 directories
fail to build. This is a problem for native and cross-builds. Fix it to
create all necessary directories keying off of TEST_GEN_PROGS.

The following use-cases work with this change:

Native x86_64:
make O=/tmp/kselftest -C tools/testing/selftests TARGETS=kvm install \
 INSTALL_PATH=$HOME/x86_64

arm64 cross-build:
make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \
	CROSS_COMPILE=aarch64-linux-gnu- defconfig

make O=$HOME/arm64_build/ ARCH=arm64 HOSTCC=gcc \
	CROSS_COMPILE=aarch64-linux-gnu- all

make kselftest-install TARGETS=kvm O=$HOME/arm64_build ARCH=arm64 \
	HOSTCC=gcc CROSS_COMPILE=aarch64-linux-gnu-

s390x cross-build:
make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \
	CROSS_COMPILE=s390x-linux-gnu- defconfig

make O=$HOME/s390x_build/ ARCH=s390 HOSTCC=gcc \
	CROSS_COMPILE=s390x-linux-gnu- all

make kselftest-install TARGETS=kvm O=$HOME/s390x_build/ ARCH=s390 \
	HOSTCC=gcc CROSS_COMPILE=s390x-linux-gnu- all

No regressions in the following use-cases:
make -C tools/testing/selftests TARGETS=kvm
make kselftest-all TARGETS=kvm

Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-05-01 09:47:55 -06:00
Masami Hiramatsu 6734d211fe selftests/ftrace: Make XFAIL green color
Since XFAIL (Expected Failure) is expected to fail the test, which
means that test case works as we expected. IOW, XFAIL is same as
PASS. So make it green.

Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-05-01 09:31:38 -06:00
Alan Maguire b730d66813 ftrace/selftest: make unresolved cases cause failure if --fail-unresolved set
Currently, ftracetest will return 1 (failure) if any unresolved cases
are encountered.  The unresolved status results from modules and
programs not being available, and as such does not indicate any
issues with ftrace itself.  As such, change the behaviour of
ftracetest in line with unsupported cases; if unsupported cases
happen, ftracetest still returns 0 unless --fail-unsupported.  Here
--fail-unresolved is added and the default is to return 0 if
unresolved results occur.

Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-05-01 09:26:51 -06:00
Alan Maguire 57c4cfd4a2 ftrace/selftests: workaround cgroup RT scheduling issues
wakeup_rt.tc and wakeup.tc tests in tracers/ subdirectory
fail due to the chrt command returning:

 chrt: failed to set pid 0's policy: Operation not permitted.

To work around this, temporarily disable grout RT scheduling
during ftracetest execution.  Restore original value on
test run completion.  With these changes in place, both
tests consistently pass.

Fixes: c575dea2c1 ("selftests/ftrace: Add wakeup_rt tracer testcase")
Fixes: c1edd060b4 ("selftests/ftrace: Add wakeup tracer testcase")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-05-01 09:25:39 -06:00
Pavel Begunkov 2fb3e82284 io_uring: punt splice async because of inode mutex
Nonblocking do_splice() still may wait for some time on an inode mutex.
Let's play safe and always punt it async.

Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-01 08:50:57 -06:00
Pavel Begunkov 4ee3631451 io_uring: check non-sync defer_list carefully
io_req_defer() do double-checked locking. Use proper helpers for that,
i.e. list_empty_careful().

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-01 08:50:30 -06:00
Pavel Begunkov 7759a0bfad io_uring: fix extra put in sync_file_range()
[   40.179474] refcount_t: underflow; use-after-free.
[   40.179499] WARNING: CPU: 6 PID: 1848 at lib/refcount.c:28 refcount_warn_saturate+0xae/0xf0
...
[   40.179612] RIP: 0010:refcount_warn_saturate+0xae/0xf0
[   40.179617] Code: 28 44 0a 01 01 e8 d7 01 c2 ff 0f 0b 5d c3 80 3d 15 44 0a 01 00 75 91 48 c7 c7 b8 f5 75 be c6 05 05 44 0a 01 01 e8 b7 01 c2 ff <0f> 0b 5d c3 80 3d f3 43 0a 01 00 0f 85 6d ff ff ff 48 c7 c7 10 f6
[   40.179619] RSP: 0018:ffffb252423ebe18 EFLAGS: 00010286
[   40.179623] RAX: 0000000000000000 RBX: ffff98d65e929400 RCX: 0000000000000000
[   40.179625] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 00000000ffffffff
[   40.179627] RBP: ffffb252423ebe18 R08: 0000000000000001 R09: 000000000000055d
[   40.179629] R10: 0000000000000c8c R11: 0000000000000001 R12: 0000000000000000
[   40.179631] R13: ffff98d68c434400 R14: ffff98d6a9cbaa20 R15: ffff98d6a609ccb8
[   40.179634] FS:  0000000000000000(0000) GS:ffff98d6af580000(0000) knlGS:0000000000000000
[   40.179636] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   40.179638] CR2: 00000000033e3194 CR3: 000000006480a003 CR4: 00000000003606e0
[   40.179641] Call Trace:
[   40.179652]  io_put_req+0x36/0x40
[   40.179657]  io_free_work+0x15/0x20
[   40.179661]  io_worker_handle_work+0x2f5/0x480
[   40.179667]  io_wqe_worker+0x2a9/0x360
[   40.179674]  ? _raw_spin_unlock_irqrestore+0x24/0x40
[   40.179681]  kthread+0x12c/0x170
[   40.179685]  ? io_worker_handle_work+0x480/0x480
[   40.179690]  ? kthread_park+0x90/0x90
[   40.179695]  ret_from_fork+0x35/0x40
[   40.179702] ---[ end trace 85027405f00110aa ]---

Opcode handler must never put submission ref, but that's what
io_sync_file_range_finish() do. use io_steal_work() there.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-05-01 08:50:30 -06:00
Daniel Kolesa 59dfb0c64d drm/amd/display: work around fp code being emitted outside of DC_FP_START/END
The dcn20_validate_bandwidth function would have code touching the
incorrect registers emitted outside of the boundaries of the
DC_FP_START/END macros, at least on ppc64le. Work around the
problem by wrapping the whole function instead.

Signed-off-by: Daniel Kolesa <daniel@octaforge.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.6.x
2020-05-01 09:24:40 -04:00
Michel Dänzer f33a6dec4e drm/amdgpu/dc: Use WARN_ON_ONCE for ASSERT
Once should generally be enough for diagnosing what lead up to it,
repeating it over and over can be pretty annoying.

Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-05-01 09:24:40 -04:00
Evan Quan f7b52890da drm/amdgpu: drop redundant cg/pg ungate on runpm enter
CG/PG ungate is already performed in ip_suspend_phase1. Otherwise,
the CG/PG ungate will be performed twice. That will cause gfxoff
disablement is performed twice also on runpm enter while gfxoff
enablemnt once on rump exit. That will put gfxoff into disabled
state.

Fixes: b2a7e9735a ("drm/amdgpu: fix the hw hang during perform system reboot and reset")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2020-05-01 09:23:49 -04:00
Evan Quan c457a273e1 drm/amdgpu: move kfd suspend after ip_suspend_phase1
This sequence change should be safe as what did in ip_suspend_phase1
is to suspend DCE only. And this is a prerequisite for coming
redundant cg/pg ungate dropping.

Fixes: 487eca11a3 ("drm/amdgpu: fix gfx hang during suspend with video playback (v2)")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2020-05-01 09:22:14 -04:00
Tang Bin b52649aee6 iommu/qcom: Fix local_base status check
The function qcom_iommu_device_probe() does not perform sufficient
error checking after executing devm_ioremap_resource(), which can
result in crashes if a critical error path is encountered.

Fixes: 0ae349a0f3 ("iommu/qcom: Add qcom_iommu")
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200418134703.1760-1-tangbin@cmss.chinamobile.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-01 13:37:23 +02:00
Greg Kroah-Hartman ae74c19faa iommu: Properly export iommu_group_get_for_dev()
In commit a7ba5c3d00 ("drivers/iommu: Export core IOMMU API symbols to
permit modular drivers") a bunch of iommu symbols were exported, all
with _GPL markings except iommu_group_get_for_dev().  That export should
also be _GPL like the others.

Fixes: a7ba5c3d00 ("drivers/iommu: Export core IOMMU API symbols to permit modular drivers")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: John Garry <john.garry@huawei.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200430120120.2948448-1-gregkh@linuxfoundation.org
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-01 13:32:34 +02:00
Lu Baolu ba61c3da00 iommu/vt-d: Use right Kconfig option name
The CONFIG_ prefix should be added in the code.

Fixes: 046182525d ("iommu/vt-d: Add Kconfig option to enable/disable scalable mode")
Reported-and-tested-by: Kumar, Sanjay K <sanjay.k.kumar@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200501072427.14265-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-01 13:31:17 +02:00
Suravee Suthikulpanit b74aa02d7a iommu/amd: Fix legacy interrupt remapping for x2APIC-enabled system
Currently, system fails to boot because the legacy interrupt remapping
mode does not enable 128-bit IRTE (GA), which is required for x2APIC
support.

Fix by using AMD_IOMMU_GUEST_IR_LEGACY_GA mode when booting with
kernel option amd_iommu_intr=legacy instead. The initialization
logic will check GASup and automatically fallback to using
AMD_IOMMU_GUEST_IR_LEGACY if GA mode is not supported.

Fixes: 3928aa3f57 ("iommu/amd: Detect and enable guest vAPIC support")
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lore.kernel.org/r/1587562202-14183-1-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-05-01 13:21:18 +02:00
Marc Zyngier 0225fd5e0a KVM: arm64: Fix 32bit PC wrap-around
In the unlikely event that a 32bit vcpu traps into the hypervisor
on an instruction that is located right at the end of the 32bit
range, the emulation of that instruction is going to increment
PC past the 32bit range. This isn't great, as userspace can then
observe this value and get a bit confused.

Conversly, userspace can do things like (in the context of a 64bit
guest that is capable of 32bit EL0) setting PSTATE to AArch64-EL0,
set PC to a 64bit value, change PSTATE to AArch32-USR, and observe
that PC hasn't been truncated. More confusion.

Fix both by:
- truncating PC increments for 32bit guests
- sanitizing all 32bit regs every time a core reg is changed by
  userspace, and that PSTATE indicates a 32bit mode.

Cc: stable@vger.kernel.org
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2020-05-01 09:51:08 +01:00
Xiaoguang Wang 3fd44c8671 io_uring: use cond_resched() in io_ring_ctx_wait_and_kill()
While working on to make io_uring sqpoll mode support syscalls that need
struct files_struct, I got cpu soft lockup in io_ring_ctx_wait_and_kill(),

    while (ctx->sqo_thread && !wq_has_sleeper(&ctx->sqo_wait))
        cpu_relax();

above loop never has an chance to exit, it's because preempt isn't enabled
in the kernel, and the context calling io_ring_ctx_wait_and_kill() and
io_sq_thread() run in the same cpu, if io_sq_thread calls a cond_resched()
yield cpu and another context enters above loop, then io_sq_thread() will
always in runqueue and never exit.

Use cond_resched() can fix this issue.

 Reported-by: syzbot+66243bb7126c410cefe6@syzkaller.appspotmail.com
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-30 22:24:27 -06:00
Bijan Mottahedeh dd461af659 io_uring: use proper references for fallback_req locking
Use ctx->fallback_req address for test_and_set_bit_lock() and
clear_bit_unlock().

Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-30 22:24:27 -06:00
Jens Axboe 490e89676a io_uring: only force async punt if poll based retry can't handle it
We do blocking retry from our poll handler, if the file supports polled
notifications. Only mark the request as needing an async worker if we
can't poll for it.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-30 22:24:27 -06:00
Jens Axboe af197f50ac io_uring: enable poll retry for any file with ->read_iter / ->write_iter
We can have files like eventfd where it's perfectly fine to do poll
based retry on them, right now io_file_supports_async() doesn't take
that into account.

Pass in data direction and check the f_op instead of just always needing
an async worker.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-04-30 22:24:22 -06:00
Rahul Lakkireddy 69422a7e5d cxgb4: fix EOTID leak when disabling TC-MQPRIO offload
Under heavy load, the EOTID termination FLOWC request fails to get
enqueued to the end of the Tx ring due to lack of credits. This
results in EOTID leak.

When disabling TC-MQPRIO offload, the link is already brought down
to cleanup EOTIDs. So, flush any pending enqueued skbs that can't be
sent outside the wire, to make room for FLOWC request. Also, move the
FLOWC descriptor consumption logic closer to when the FLOWC request is
actually posted to hardware.

Fixes: 0e395b3cb1 ("cxgb4: add FLOWC based QoS offload")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30 21:01:46 -07:00
Andy Shevchenko ab1c637cc6 stmmac: intel: Fix kernel crash due to wrong error path
Unfortunately sometimes ->probe() may fail. The commit b9663b7ca6
("net: stmmac: Enable SERDES power up/down sequence")
messed up with error handling and thus:

[   12.811311] ------------[ cut here ]------------
[   12.811993] kernel BUG at net/core/dev.c:9937!

Fix this by properly crafted error path.

Fixes: b9663b7ca6 ("net: stmmac: Enable SERDES power up/down sequence")
Cc: Voon Weifeng <weifeng.voon@intel.com>
Cc: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-30 21:00:17 -07:00