Intention of cgroup bind/connect/sendmsg BPF hooks is to act transparently
to applications as also stated in original motivation in 7828f20e37 ("Merge
branch 'bpf-cgroup-bind-connect'"). When recently integrating the latter
two hooks into Cilium to enable host based load-balancing with Kubernetes,
I ran into the issue that pods couldn't start up as DNS got broken. Kubernetes
typically sets up DNS as a service and is thus subject to load-balancing.
Upon further debugging, it turns out that the cgroupv2 sendmsg BPF hooks API
is currently insufficient and thus not usable as-is for standard applications
shipped with most distros. To break down the issue we ran into with a simple
example:
# cat /etc/resolv.conf
nameserver 147.75.207.207
nameserver 147.75.207.208
For the purpose of a simple test, we set up above IPs as service IPs and
transparently redirect traffic to a different DNS backend server for that
node:
# cilium service list
ID Frontend Backend
1 147.75.207.207:53 1 => 8.8.8.8:53
2 147.75.207.208:53 1 => 8.8.8.8:53
The attached BPF program is basically selecting one of the backends if the
service IP/port matches on the cgroup hook. DNS breaks here, because the
hooks are not transparent enough to applications which have built-in msg_name
address checks:
# nslookup 1.1.1.1
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
[...]
;; connection timed out; no servers could be reached
# dig 1.1.1.1
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.208#53
;; reply from unexpected source: 8.8.8.8#53, expected 147.75.207.207#53
[...]
; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1
;; global options: +cmd
;; connection timed out; no servers could be reached
For comparison, if none of the service IPs is used, and we tell nslookup
to use 8.8.8.8 directly it works just fine, of course:
# nslookup 1.1.1.1 8.8.8.8
1.1.1.1.in-addr.arpa name = one.one.one.one.
In order to fix this and thus act more transparent to the application,
this needs reverse translation on recvmsg() side. A minimal fix for this
API is to add similar recvmsg() hooks behind the BPF cgroups static key
such that the program can track state and replace the current sockaddr_in{,6}
with the original service IP. From BPF side, this basically tracks the
service tuple plus socket cookie in an LRU map where the reverse NAT can
then be retrieved via map value as one example. Side-note: the BPF cgroups
static key should be converted to a per-hook static key in future.
Same example after this fix:
# cilium service list
ID Frontend Backend
1 147.75.207.207:53 1 => 8.8.8.8:53
2 147.75.207.208:53 1 => 8.8.8.8:53
Lookups work fine now:
# nslookup 1.1.1.1
1.1.1.1.in-addr.arpa name = one.one.one.one.
Authoritative answers can be found from:
# dig 1.1.1.1
; <<>> DiG 9.11.3-1ubuntu1.7-Ubuntu <<>> 1.1.1.1
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 51550
;; flags: qr rd ra ad; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 1
;; OPT PSEUDOSECTION:
; EDNS: version: 0, flags:; udp: 512
;; QUESTION SECTION:
;1.1.1.1. IN A
;; AUTHORITY SECTION:
. 23426 IN SOA a.root-servers.net. nstld.verisign-grs.com. 2019052001 1800 900 604800 86400
;; Query time: 17 msec
;; SERVER: 147.75.207.207#53(147.75.207.207)
;; WHEN: Tue May 21 12:59:38 UTC 2019
;; MSG SIZE rcvd: 111
And from an actual packet level it shows that we're using the back end
server when talking via 147.75.207.20{7,8} front end:
# tcpdump -i any udp
[...]
12:59:52.698732 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
12:59:52.698735 IP foo.42011 > google-public-dns-a.google.com.domain: 18803+ PTR? 1.1.1.1.in-addr.arpa. (38)
12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
12:59:52.701208 IP google-public-dns-a.google.com.domain > foo.42011: 18803 1/0/0 PTR one.one.one.one. (67)
[...]
In order to be flexible and to have same semantics as in sendmsg BPF
programs, we only allow return codes in [1,1] range. In the sendmsg case
the program is called if msg->msg_name is present which can be the case
in both, connected and unconnected UDP.
The former only relies on the sockaddr_in{,6} passed via connect(2) if
passed msg->msg_name was NULL. Therefore, on recvmsg side, we act in similar
way to call into the BPF program whenever a non-NULL msg->msg_name was
passed independent of sk->sk_state being TCP_ESTABLISHED or not. Note
that for TCP case, the msg->msg_name is ignored in the regular recvmsg
path and therefore not relevant.
For the case of ip{,v6}_recv_error() paths, picked up via MSG_ERRQUEUE,
the hook is not called. This is intentional as it aligns with the same
semantics as in case of TCP cgroup BPF hooks right now. This might be
better addressed in future through a different bpf_attach_type such
that this case can be distinguished from the regular recvmsg paths,
for example.
Fixes: 1cedee13d2 ("bpf: Hooks for sys_sendmsg")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrey Ignatov <rdna@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
b636fd38dc ("cgroup: Implement css_task_iter_skip()") introduced
css_task_iter_skip() which is used to fix task iterations skipping
dying threadgroup leaders with live threads. Skipping is implemented
as a subportion of full advancing but css_task_iter_next() forgot to
fully advance a skipped iterator before determining the next task to
visit causing it to return invalid task pointers.
Fix it by making css_task_iter_next() fully advance the iterator if it
has been skipped since the previous iteration.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: syzbot
Link: http://lkml.kernel.org/r/00000000000097025d058a7fd785@google.com
Fixes: b636fd38dc ("cgroup: Implement css_task_iter_skip()")
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
distributed under the terms of the gnu gpl version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 2 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.032570679@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
distribute under gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 8 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.475576622@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this file is released under the gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 68 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190114.292346262@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
released under terms in gpl version 2 see copying
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 5 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531081035.689962394@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not write to the free
software foundation inc 59 temple place suite 330 boston ma 02111
1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 136 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190530000436.384967451@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 64 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this software is licensed under the terms of the gnu general public
license version 2 as published by the free software foundation and
may be copied distributed and modified under those terms this
program is distributed in the hope that it will be useful but
without any warranty without even the implied warranty of
merchantability or fitness for a particular purpose see the gnu
general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 285 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Improve the comments for pidfd_send_signal().
First, the comment still referred to a file descriptor for a process as a
"task file descriptor" which stems from way back at the beginning of the
discussion. Replace this with "pidfd" for consistency.
Second, the wording for the explanation of the arguments to the syscall
was a bit inconsistent, e.g. some used the past tense some used present
tense. Make the wording more consistent.
Signed-off-by: Christian Brauner <christian@brauner.io>
The variable err is assigned with the value -EINVAL that is never
read and it is re-assigned a new value later on. The assignment is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As explained in
0cc3cd2165 ("cpu/hotplug: Boot HT siblings at least once")
we always, no matter what, have to bring up x86 HT siblings during boot at
least once in order to avoid first MCE bringing the system to its knees.
That means that whenever 'nosmt' is supplied on the kernel command-line,
all the HT siblings are as a result sitting in mwait or cpudile after
going through the online-offline cycle at least once.
This causes a serious issue though when a kernel, which saw 'nosmt' on its
commandline, is going to perform resume from hibernation: if the resume
from the hibernated image is successful, cr3 is flipped in order to point
to the address space of the kernel that is being resumed, which in turn
means that all the HT siblings are all of a sudden mwaiting on address
which is no longer valid.
That results in triple fault shortly after cr3 is switched, and machine
reboots.
Fix this by always waking up all the SMT siblings before initiating the
'restore from hibernation' process; this guarantees that all the HT
siblings will be properly carried over to the resumed kernel waiting in
resume_play_dead(), and acted upon accordingly afterwards, based on the
target kernel configuration.
Symmetricaly, the resumed kernel has to push the SMT siblings to mwait
again in case it has SMT disabled; this means it has to online all
the siblings when resuming (so that they come out of hlt) and offline
them again to let them reach mwait.
Cc: 4.19+ <stable@vger.kernel.org> # v4.19+
Debugged-by: Thomas Gleixner <tglx@linutronix.de>
Fixes: 0cc3cd2165 ("cpu/hotplug: Boot HT siblings at least once")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add kerneldoc comments to pm_suspend_via_firmware(),
pm_resume_via_firmware() and pm_suspend_via_s2idle()
to explain what they do.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull perf fixes from Ingo Molnar:
"On the kernel side there's a bunch of ring-buffer ordering fixes for a
reproducible bug, plus a PEBS constraints regression fix.
Plus tooling fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools headers UAPI: Sync kvm.h headers with the kernel sources
perf record: Fix s390 missing module symbol and warning for non-root users
perf machine: Read also the end of the kernel
perf test vmlinux-kallsyms: Ignore aliases to _etext when searching on kallsyms
perf session: Add missing swap ops for namespace events
perf namespace: Protect reading thread's namespace
tools headers UAPI: Sync drm/drm.h with the kernel
tools headers UAPI: Sync drm/i915_drm.h with the kernel
tools headers UAPI: Sync linux/fs.h with the kernel
tools headers UAPI: Sync linux/sched.h with the kernel
tools arch x86: Sync asm/cpufeatures.h with the with the kernel
tools include UAPI: Update copy of files related to new fspick, fsmount, fsconfig, fsopen, move_mount and open_tree syscalls
perf arm64: Fix mksyscalltbl when system kernel headers are ahead of the kernel
perf data: Fix 'strncat may truncate' build failure with recent gcc
perf/ring-buffer: Use regular variables for nesting
perf/ring-buffer: Always use {READ,WRITE}_ONCE() for rb->user_page data
perf/ring_buffer: Add ordering to rb->nest increment
perf/ring_buffer: Fix exposing a temporarily decreased data_head
perf/x86/intel/ds: Fix EVENT vs. UEVENT PEBS constraints
Merge misc fixes from Andrew Morton:
"Various fixes and followups"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, compaction: make sure we isolate a valid PFN
include/linux/generic-radix-tree.h: fix kerneldoc comment
kernel/signal.c: trace_signal_deliver when signal_group_exit
drivers/iommu/intel-iommu.c: fix variable 'iommu' set but not used
spdxcheck.py: fix directory structures
kasan: initialize tag to 0xff in __kasan_kmalloc
z3fold: fix sheduling while atomic
scripts/gdb: fix invocation when CONFIG_COMMON_CLK is not set
mm/gup: continue VM_FAULT_RETRY processing even for pre-faults
ocfs2: fix error path kobject memory leak
memcg: make it work on sparse non-0-node systems
mm, memcg: consider subtrees in memory.events
prctl_set_mm: downgrade mmap_sem to read lock
prctl_set_mm: refactor checks from validate_prctl_map
kernel/fork.c: make max_threads symbol static
arch/arm/boot/compressed/decompress.c: fix build error due to lz4 changes
arch/parisc/configs/c8000_defconfig: remove obsoleted CONFIG_DEBUG_SLAB_LEAK
mm/vmalloc.c: fix typo in comment
lib/sort.c: fix kernel-doc notation warnings
mm: fix Documentation/vm/hmm.rst Sphinx warnings
In the fixes commit, removing SIGKILL from each thread signal mask and
executing "goto fatal" directly will skip the call to
"trace_signal_deliver". At this point, the delivery tracking of the
SIGKILL signal will be inaccurate.
Therefore, we need to add trace_signal_deliver before "goto fatal" after
executing sigdelset.
Note: SEND_SIG_NOINFO matches the fact that SIGKILL doesn't have any info.
Link: http://lkml.kernel.org/r/20190425025812.91424-1-weizhenliang@huawei.com
Fixes: cf43a757fd ("signal: Restore the stop PTRACE_EVENT_EXIT")
Signed-off-by: Zhenliang Wei <weizhenliang@huawei.com>
Reviewed-by: Christian Brauner <christian@brauner.io>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Ivan Delalande <colona@arista.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memory.stat and other files already consider subtrees in their output, and
we should too in order to not present an inconsistent interface.
The current situation is fairly confusing, because people interacting with
cgroups expect hierarchical behaviour in the vein of memory.stat,
cgroup.events, and other files. For example, this causes confusion when
debugging reclaim events under low, as currently these always read "0" at
non-leaf memcg nodes, which frequently causes people to misdiagnose breach
behaviour. The same confusion applies to other counters in this file when
debugging issues.
Aggregation is done at write time instead of at read-time since these
counters aren't hot (unlike memory.stat which is per-page, so it does it
at read time), and it makes sense to bundle this with the file
notifications.
After this patch, events are propagated up the hierarchy:
[root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events
low 0
high 0
max 0
oom 0
oom_kill 0
[root@ktst ~]# systemd-run -p MemoryMax=1 true
Running as unit: run-r251162a189fb4562b9dabfdc9b0422f5.service
[root@ktst ~]# cat /sys/fs/cgroup/system.slice/memory.events
low 0
high 0
max 7
oom 1
oom_kill 1
As this is a change in behaviour, this can be reverted to the old
behaviour by mounting with the `memory_localevents' flag set. However, we
use the new behaviour by default as there's a lack of evidence that there
are any current users of memory.events that would find this change
undesirable.
akpm: this is a behaviour change, so Cc:stable. THis is so that
forthcoming distros which use cgroup v2 are more likely to pick up the
revised behaviour.
Link: http://lkml.kernel.org/r/20190208224419.GA24772@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The commit a3b609ef9f ("proc read mm's {arg,env}_{start,end} with mmap
semaphore taken.") added synchronization of reading argument/environment
boundaries under mmap_sem. Later commit 88aa7cc688 ("mm: introduce
arg_lock to protect arg_start|end and env_start|end in mm_struct") avoided
the coarse use of mmap_sem in similar situations. But there still
remained two places that (mis)use mmap_sem.
get_cmdline should also use arg_lock instead of mmap_sem when it reads the
boundaries.
The second place that should use arg_lock is in prctl_set_mm. By
protecting the boundaries fields with the arg_lock, we can downgrade
mmap_sem to reader lock (analogous to what we already do in
prctl_set_mm_map).
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/20190502125203.24014-3-mkoutny@suse.com
Fixes: 88aa7cc688 ("mm: introduce arg_lock to protect arg_start|end and env_start|end in mm_struct")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Co-developed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Despite comment of validate_prctl_map claims there are no capability
checks, it is not completely true since commit 4d28df6152 ("prctl: Allow
local CAP_SYS_ADMIN changing exe_file"). Extract the check out of the
function and make the function perform purely arithmetic checks.
This patch should not change any behavior, it is mere refactoring for
following patch.
[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/20190502125203.24014-2-mkoutny@suse.com
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix build warning,
kernel/fork.c:125:5: warning: symbol 'max_threads' was not declared. Should it be static?
Link: http://lkml.kernel.org/r/20190516015118.140561-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-05-31
The following pull-request contains BPF updates for your *net-next* tree.
Lots of exciting new features in the first PR of this developement cycle!
The main changes are:
1) misc verifier improvements, from Alexei.
2) bpftool can now convert btf to valid C, from Andrii.
3) verifier can insert explicit ZEXT insn when requested by 32-bit JITs.
This feature greatly improves BPF speed on 32-bit architectures. From Jiong.
4) cgroups will now auto-detach bpf programs. This fixes issue of thousands
bpf programs got stuck in dying cgroups. From Roman.
5) new bpf_send_signal() helper, from Yonghong.
6) cgroup inet skb programs can signal CN to the stack, from Lawrence.
7) miscellaneous cleanups, from many developers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Most bpf map types doing similar checks and bytes to pages
conversion during memory allocation and charging.
Let's unify these checks by moving them into bpf_map_charge_init().
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order to unify the existing memlock charging code with the
memcg-based memory accounting, which will be added later, let's
rework the current scheme.
Currently the following design is used:
1) .alloc() callback optionally checks if the allocation will likely
succeed using bpf_map_precharge_memlock()
2) .alloc() performs actual allocations
3) .alloc() callback calculates map cost and sets map.memory.pages
4) map_create() calls bpf_map_init_memlock() which sets map.memory.user
and performs actual charging; in case of failure the map is
destroyed
<map is in use>
1) bpf_map_free_deferred() calls bpf_map_release_memlock(), which
performs uncharge and releases the user
2) .map_free() callback releases the memory
The scheme can be simplified and made more robust:
1) .alloc() calculates map cost and calls bpf_map_charge_init()
2) bpf_map_charge_init() sets map.memory.user and performs actual
charge
3) .alloc() performs actual allocations
<map is in use>
1) .map_free() callback releases the memory
2) bpf_map_charge_finish() performs uncharge and releases the user
The new scheme also allows to reuse bpf_map_charge_init()/finish()
functions for memcg-based accounting. Because charges are performed
before actual allocations and uncharges after freeing the memory,
no bogus memory pressure can be created.
In cases when the map structure is not available (e.g. it's not
created yet, or is already destroyed), on-stack bpf_map_memory
structure is used. The charge can be transferred with the
bpf_map_charge_move() function.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Group "user" and "pages" fields of bpf_map into the bpf_map_memory
structure. Later it can be extended with "memcg" and other related
information.
The main reason for a such change (beside cosmetics) is to pass
bpf_map_memory structure to charging functions before the actual
allocation of bpf_map.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cgroup local storage maps lack the memlock precharge check,
which is performed before the memory allocation for
most other bpf map types.
Let's add it in order to unify all map types.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For egress packets, __cgroup_bpf_fun_filter_skb() will now call
BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY() instead of PROG_CGROUP_RUN_ARRAY()
in order to propagate congestion notifications (cn) requests to TCP
callers.
For egress packets, this function can return:
NET_XMIT_SUCCESS (0) - continue with packet output
NET_XMIT_DROP (1) - drop packet and notify TCP to call cwr
NET_XMIT_CN (2) - continue with packet output and notify TCP
to call cwr
-EPERM - drop packet
For ingress packets, this function will return -EPERM if any attached
program was found and if it returned != 1 during execution. Otherwise 0
is returned.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allows cgroup inet skb programs to return values in the range [0, 3].
The second bit is used to deterine if congestion occurred and higher
level protocol should decrease rate. E.g. TCP would call tcp_enter_cwr()
The bpf_prog must set expected_attach_type to BPF_CGROUP_INET_EGRESS
at load time if it uses the new return values (i.e. 2 or 3).
The expected_attach_type is currently not enforced for
BPF_PROG_TYPE_CGROUP_SKB. e.g Meaning the current bpf_prog with
expected_attach_type setting to BPF_CGROUP_INET_EGRESS can attach to
BPF_CGROUP_INET_INGRESS. Blindly enforcing expected_attach_type will
break backward compatibility.
This patch adds a enforce_expected_attach_type bit to only
enforce the expected_attach_type when it uses the new
return value.
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
CSS_TASK_ITER_PROCS currently iterates live group leaders; however,
this means that a process with dying leader and live threads will be
skipped. IOW, cgroup.procs might be empty while cgroup.threads isn't,
which is confusing to say the least.
Fix it by making cset track dying tasks and include dying leaders with
live threads in PROCS iteration.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Topi Miettinen <toiwoton@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
When a task is moved out of a cset, task iterators pointing to the
task are advanced using the normal css_task_iter_advance() call. This
is fine but we'll be tracking dying tasks on csets and thus moving
tasks from cset->tasks to (to be added) cset->dying_tasks. When we
remove a task from cset->tasks, if we advance the iterators, they may
move over to the next cset before we had the chance to add the task
back on the dying list, which can allow the task to escape iteration.
This patch separates out skipping from advancing. Skipping only moves
the affected iterators to the next pointer rather than fully advancing
it and the following advancing will recognize that the cursor has
already been moved forward and do the rest of advancing. This ensures
that when a task moves from one list to another in its cset, as long
as it moves in the right direction, it's always visible to iteration.
This doesn't cause any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
cgroup_release() calls cgroup_subsys->release() which is used by the
pids controller to uncharge its pid. We want to use it to manage
iteration of dying tasks which requires putting it before
__unhash_process(). Move cgroup_release() above __exit_signal().
While this makes it uncharge before the pid is freed, pid is RCU freed
anyway and the window is very narrow.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
- Modify the PCI bus type's PM code to avoid putting devices left
by their drivers in D0 on purpose during suspend to idle into
low-power states as doing that may confuse the system resume
callbacks of the drivers in question (Rafael Wysocki).
- Avoid checking ACPI wakeup configuration during system-wide
suspend for suspended devices that do not use ACPI-based wakeup
to allow them to stay in suspend more often (Rafael Wysocki).
- The last phase of hibernation is analogous to system-wide suspend
also because on platforms with ACPI it passes control to the
platform firmware to complete the transision, so make it indicate
that by calling pm_set_suspend_via_firmware() to allow the drivers
that care about this to do the right thing (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----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=Ddo8
-----END PGP SIGNATURE-----
Merge tag 'pm-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three issues in the system-wide suspend and hibernation area
related to PCI device PM handling by suspend-to-idle, device wakeup
optimizations and arbitrary differences between suspend and
hiberantion.
Specifics:
- Modify the PCI bus type's PM code to avoid putting devices left by
their drivers in D0 on purpose during suspend to idle into
low-power states as doing that may confuse the system resume
callbacks of the drivers in question (Rafael Wysocki).
- Avoid checking ACPI wakeup configuration during system-wide suspend
for suspended devices that do not use ACPI-based wakeup to allow
them to stay in suspend more often (Rafael Wysocki).
- The last phase of hibernation is analogous to system-wide suspend
also because on platforms with ACPI it passes control to the
platform firmware to complete the transision, so make it indicate
that by calling pm_set_suspend_via_firmware() to allow the drivers
that care about this to do the right thing (Rafael Wysocki)"
* tag 'pm-5.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI: PM: Avoid possible suspend-to-idle issue
ACPI: PM: Call pm_set_suspend_via_firmware() during hibernation
ACPI/PCI: PM: Add missing wakeup.flags.valid checks
Here is another set of reviewed patches that adds SPDX tags to different
kernel files, based on a set of rules that are being used to parse the
comments to try to determine that the license of the file is
"GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
these matches are included here, a number of "non-obvious" variants of
text have been found but those have been postponed for later review and
analysis.
There is also a patch in here to add the proper SPDX header to a bunch
of Kbuild files that we have missed in the past due to new files being
added and forgetting that Kbuild uses two different file names for
Makefiles. This issue was reported by the Kbuild maintainer.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXPCHLg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykxyACgql6ktH+Tv8Ho1747kKPiFca1Jq0AoK5HORXI
yB0DSTXYNjMtH41ypnsZ
=x2f8
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull yet more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later" or "GPL-2.0-only". Only the "obvious" versions of
these matches are included here, a number of "non-obvious" variants of
text have been found but those have been postponed for later review
and analysis.
There is also a patch in here to add the proper SPDX header to a bunch
of Kbuild files that we have missed in the past due to new files being
added and forgetting that Kbuild uses two different file names for
Makefiles. This issue was reported by the Kbuild maintainer.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"
* tag 'spdx-5.2-rc3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (82 commits)
treewide: Add SPDX license identifier - Kbuild
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 225
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 224
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 223
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 222
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 221
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 220
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 218
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 217
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 216
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 215
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 214
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 213
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 211
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 210
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 209
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 207
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 203
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201
...
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 107 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.615055994@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this file is release under the gplv2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.216732358@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1334 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Recently syzbot in conjunction with KMSAN reported that
ptrace_peek_siginfo can copy an uninitialized siginfo to userspace.
Inspecting ptrace_peek_siginfo confirms this.
The problem is that off when initialized from args.off can be
initialized to a negaive value. At which point the "if (off >= 0)"
test to see if off became negative fails because off started off
negative.
Prevent the core problem by adding a variable found that is only true
if a siginfo is found and copied to a temporary in preparation for
being copied to userspace.
Prevent args.off from being truncated when being assigned to off by
testing that off is <= the maximum possible value of off. Convert off
to an unsigned long so that we should not have to truncate args.off,
we have well defined overflow behavior so if we add another check we
won't risk fighting undefined compiler behavior, and so that we have a
type whose maximum value is easy to test for.
Cc: Andrei Vagin <avagin@gmail.com>
Cc: stable@vger.kernel.org
Reported-by: syzbot+0d602a1b0d8c95bdf299@syzkaller.appspotmail.com
Fixes: 84c751bd4a ("ptrace: add ability to retrieve signals without removing from a queue (v4)")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXO303xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlb7AP4179SWPy9RFxvxyjTmpPFPL9oR0Q26
sOTyIBN99MUTsgEA0FNWz7/FWtFDa1wbh0tEVreaTQlKEeoIYF96dkN0iwE=
=BJgg
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"This fixes a memory leak from the error path in the event filter
logic"
* tag 'trace-v5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Avoid memory leak in predicate_parse()
Now that we don't have __rcu markers on the bpf_prog_array helpers,
let's use proper rcu_dereference_protected to obtain array pointer
under mutex.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Now that we don't have __rcu markers on the bpf_prog_array helpers,
let's use proper rcu_dereference_protected to obtain array pointer
under mutex.
We also don't need __rcu annotations on cgroup_bpf.inactive since
it's not read/updated concurrently.
v4:
* drop cgroup_rcu_xyz wrappers and use rcu APIs directly; presumably
should be more clear to understand which mutex/refcount protects
each particular place
v3:
* amend cgroup_rcu_dereference to include percpu_ref_is_dying;
cgroup_bpf is now reference counted and we don't hold cgroup_mutex
anymore in cgroup_bpf_release
v2:
* replace xchg with rcu_swap_protected
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Drop __rcu annotations and rcu read sections from bpf_prog_array
helper functions. They are not needed since all existing callers
call those helpers from the rcu update side while holding a mutex.
This guarantees that use-after-free could not happen.
In the next patches I'll fix the callers with missing
rcu_dereference_protected to make sparse/lockdep happy, the proper
way to use these helpers is:
struct bpf_prog_array __rcu *progs = ...;
struct bpf_prog_array *p;
mutex_lock(&mtx);
p = rcu_dereference_protected(progs, lockdep_is_held(&mtx));
bpf_prog_array_length(p);
bpf_prog_array_copy_to_user(p, ...);
bpf_prog_array_delete_safe(p, ...);
bpf_prog_array_copy_info(p, ...);
bpf_prog_array_copy(p, ...);
bpf_prog_array_free(p);
mutex_unlock(&mtx);
No functional changes! rcu_dereference_protected with lockdep_is_held
should catch any cases where we update prog array without a mutex
(I've looked at existing call sites and I think we hold a mutex
everywhere).
Motivation is to fix sparse warnings:
kernel/bpf/core.c:1803:9: warning: incorrect type in argument 1 (different address spaces)
kernel/bpf/core.c:1803:9: expected struct callback_head *head
kernel/bpf/core.c:1803:9: got struct callback_head [noderef] <asn:4> *
kernel/bpf/core.c:1877:44: warning: incorrect type in initializer (different address spaces)
kernel/bpf/core.c:1877:44: expected struct bpf_prog_array_item *item
kernel/bpf/core.c:1877:44: got struct bpf_prog_array_item [noderef] <asn:4> *
kernel/bpf/core.c:1901:26: warning: incorrect type in assignment (different address spaces)
kernel/bpf/core.c:1901:26: expected struct bpf_prog_array_item *existing
kernel/bpf/core.c:1901:26: got struct bpf_prog_array_item [noderef] <asn:4> *
kernel/bpf/core.c:1935:26: warning: incorrect type in assignment (different address spaces)
kernel/bpf/core.c:1935:26: expected struct bpf_prog_array_item *[assigned] existing
kernel/bpf/core.c:1935:26: got struct bpf_prog_array_item [noderef] <asn:4> *
v2:
* remove comment about potential race; that can't happen
because all callers are in rcu-update section
Cc: Roman Gushchin <guro@fb.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
BPF:
Jiri Olsa:
- Fixup determination of end of kernel map, to avoid having BPF programs,
that are after the kernel headers and just before module texts mixed up in
the kernel map.
tools UAPI header copies:
Arnaldo Carvalho de Melo:
- Update copy of files related to new fspick, fsmount, fsconfig, fsopen,
move_mount and open_tree syscalls.
- Sync cpufeatures.h, sched.h, fs.h, drm.h, i915_drm.h and kvm.h headers.
Namespaces:
Namhyung Kim:
- Add missing byte swap ops for namespace events when processing records from
perf.data files that could have been recorded in a arch with a different
endianness.
- Fix access to the thread namespaces list by using the namespaces_lock.
perf data:
Shawn Landden:
- Fix 'strncat may truncate' build failure with recent gcc.
s/390
Thomas Richter:
- Fix s390 missing module symbol and warning for non-root users in 'perf record'.
arm64:
Vitaly Chikunov:
- Fix mksyscalltbl when system kernel headers are ahead of the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXO1vsQAKCRCyPKLppCJ+
J5MrAQCrxsTz1Lc6GrStrMMX72BqmoEPzoCkmONCukVJCcXeEQEAzdz4I4/CNG3g
phtc030+Njnc8X5qpkR9kqSQuaPjWAk=
=1Fbq
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo-5.2-20190528' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes:
BPF:
Jiri Olsa:
- Fixup determination of end of kernel map, to avoid having BPF programs,
that are after the kernel headers and just before module texts mixed up in
the kernel map.
tools UAPI header copies:
Arnaldo Carvalho de Melo:
- Update copy of files related to new fspick, fsmount, fsconfig, fsopen,
move_mount and open_tree syscalls.
- Sync cpufeatures.h, sched.h, fs.h, drm.h, i915_drm.h and kvm.h headers.
Namespaces:
Namhyung Kim:
- Add missing byte swap ops for namespace events when processing records from
perf.data files that could have been recorded in a arch with a different
endianness.
- Fix access to the thread namespaces list by using the namespaces_lock.
perf data:
Shawn Landden:
- Fix 'strncat may truncate' build failure with recent gcc.
s/390
Thomas Richter:
- Fix s390 missing module symbol and warning for non-root users in 'perf record'.
arm64:
Vitaly Chikunov:
- Fix mksyscalltbl when system kernel headers are ahead of the kernel.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In case of errors, predicate_parse() goes to the out_free label
to free memory and to return an error code.
However, predicate_parse() does not free the predicates of the
temporary prog_stack array, thence leaking them.
Link: http://lkml.kernel.org/r/20190528154338.29976-1-tomasbortoli@gmail.com
Cc: stable@vger.kernel.org
Fixes: 80765597bc ("tracing: Rewrite filter logic to be simpler and faster")
Reported-by: syzbot+6b8e0fb820e570c59e19@syzkaller.appspotmail.com
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
[ Added protection around freeing prog_stack[i].pred ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently the lifetime of bpf programs attached to a cgroup is bound
to the lifetime of the cgroup itself. It means that if a user
forgets (or intentionally avoids) to detach a bpf program before
removing the cgroup, it will stay attached up to the release of the
cgroup. Since the cgroup can stay in the dying state (the state
between being rmdir()'ed and being released) for a very long time, it
leads to a waste of memory. Also, it blocks a possibility to implement
the memcg-based memory accounting for bpf objects, because a circular
reference dependency will occur. Charged memory pages are pinning the
corresponding memory cgroup, and if the memory cgroup is pinning
the attached bpf program, nothing will be ever released.
A dying cgroup can not contain any processes, so the only chance for
an attached bpf program to be executed is a live socket associated
with the cgroup. So in order to release all bpf data early, let's
count associated sockets using a new percpu refcounter. On cgroup
removal the counter is transitioned to the atomic mode, and as soon
as it reaches 0, all bpf programs are detached.
Because cgroup_bpf_release() can block, it can't be called from
the percpu ref counter callback directly, so instead an asynchronous
work is scheduled.
The reference counter is not socket specific, and can be used for any
other types of programs, which can be executed from a cgroup-bpf hook
outside of the process context, had such a need arise in the future.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: jolsa@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
introduced bpf_send_signal() helper. If the context is nmi,
the sending signal work needs to be deferred to irq_work.
If the signal is invalid, the error will appear in irq_work
and it won't be propagated to user.
This patch did an early check in the helper itself to notify
user invalid signal, as suggested by Daniel.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
On systems with ACPI platform firmware the last stage of hibernation
is analogous to system suspend to S3 (suspend-to-RAM), so it should
be handled analogously. In particular, pm_suspend_via_firmware()
should return 'true' in that stage to let the callers of it know that
control will be passed to the platform firmware going forward, so
pm_set_suspend_via_firmware() needs to be called then in analogy with
acpi_suspend_begin().
However, the platform hibernation ->begin() callback is invoked
during the "freeze" transition (before creating a snapshot image of
system memory) as well as during the "hibernate" transition which is
the last stage of it and pm_set_suspend_via_firmware() should be
invoked by that callback in the latter stage only.
In order to implement that redefine the hibernation ->begin()
callback to take a pm_message_t argument to indicate which stage
of hibernation is taking place and rework acpi_hibernation_begin()
and acpi_hibernation_begin_old() to take it into account as needed.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
GCC 9 now warns about calling memset() on partial structures when it
goes across multiple fields. This adds a helper for the place in
tracing that does this type of clearing of a structure.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXOrlfhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoDhAP4mogBm0JjJ1LWr8RX2/X7qFm0x1zLz
5Mk0QKfeRP3MYgEAl2mV/HeFp7aMxEY2CKy0LslmaXPhamPx1r0LlfMgIws=
=drP3
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing warning fix from Steven Rostedt:
"Make the GCC 9 warning for sub struct memset go away.
GCC 9 now warns about calling memset() on partial structures when it
goes across multiple fields. This adds a helper for the place in
tracing that does this type of clearing of a structure"
* tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Silence GCC 9 array bounds warning
Starting with GCC 9, -Warray-bounds detects cases when memset is called
starting on a member of a struct but the size to be cleared ends up
writing over further members.
Such a call happens in the trace code to clear, at once, all members
after and including `seq` on struct trace_iterator:
In function 'memset',
inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3:
./include/linux/string.h:344:9: warning: '__builtin_memset' offset
[8505, 8560] from the object at 'iter' is out of the bounds of
referenced subobject 'seq' with type 'struct trace_seq' at offset
4368 [-Warray-bounds]
344 | return __builtin_memset(p, c, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to avoid GCC complaining about it, we compute the address
ourselves by adding the offsetof distance instead of referring
directly to the member.
Since there are two places doing this clear (trace.c and trace_kdb.c),
take the chance to move the workaround into a single place in
the internal header.
Link: http://lkml.kernel.org/r/20190523124535.GA12931@gmail.com
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
[ Removed unnecessary parenthesis around "iter" ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
code and I forgot to incorporate them.
I also added a small clean up patch that was sent to me a while ago
and I just noticed it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXOixqRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlPsAQCmNzno+SJMXLLIojZ80pqs9PqLqIrW
iBopFNihRBAkxgEAle8Pvr53S4R/Hjn6j++kxBm/uWaEfICOzyqcSyqxlQA=
=Sin+
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Tom Zanussi sent me some small fixes and cleanups to the histogram
code and I forgot to incorporate them.
I also added a small clean up patch that was sent to me a while ago
and I just noticed it"
* tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kernel/trace/trace.h: Remove duplicate header of trace_seq.h
tracing: Add a check_val() check before updating cond_snapshot() track_val
tracing: Check keys for variable references in expressions too
tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts
This patch randomizes high 32-bit of a definition when BPF_F_TEST_RND_HI32
is set.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
x86_64 and AArch64 perhaps are two arches that running bpf testsuite
frequently, however the zero extension insertion pass is not enabled for
them because of their hardware support.
It is critical to guarantee the pass correction as it is supposed to be
enabled at default for a couple of other arches, for example PowerPC,
SPARC, arm, NFP etc. Therefore, it would be very useful if there is a way
to test this pass on for example x86_64.
The test methodology employed by this set is "poisoning" useless bits. High
32-bit of a definition is randomized if it is identified as not used by any
later insn. Such randomization is only enabled under testing mode which is
gated by the new bpf prog load flags "BPF_F_TEST_RND_HI32".
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After previous patches, verifier will mark a insn if it really needs zero
extension on dst_reg.
It is then for back-ends to decide how to use such information to eliminate
unnecessary zero extension code-gen during JIT compilation.
One approach is verifier insert explicit zero extension for those insns
that need zero extension in a generic way, JIT back-ends then do not
generate zero extension for sub-register write at default.
However, only those back-ends which do not have hardware zero extension
want this optimization. Back-ends like x86_64 and AArch64 have hardware
zero extension support that the insertion should be disabled.
This patch introduces new target hook "bpf_jit_needs_zext" which returns
false at default, meaning verifier zero extension insertion is disabled at
default. A back-end could override this hook to return true if it doesn't
have hardware support and want verifier insert zero extension explicitly.
Offload targets do not use this native target hook, instead, they could
get the optimization results using bpf_prog_offload_ops.finalize.
NOTE: arches could have diversified features, it is possible for one arch
to have hardware zero extension support for some sub-register write insns
but not for all. For example, PowerPC, SPARC have zero extended loads, but
not for alu32. So when verifier zero extension insertion enabled, these JIT
back-ends need to peephole insns to remove those zero extension inserted
for insn that actually has hardware zero extension support. The peephole
could be as simple as looking the next insn, if it is a special zero
extension insn then it is safe to eliminate it if the current insn has
hardware zero extension support.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Patched insns do not go through generic verification, therefore doesn't has
zero extension information collected during insn walking.
We don't bother analyze them at the moment, for any sub-register def comes
from them, just conservatively mark it as needing zero extension.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
eBPF ISA specification requires high 32-bit cleared when low 32-bit
sub-register is written. This applies to destination register of ALU32 etc.
JIT back-ends must guarantee this semantic when doing code-gen. x86_64 and
AArch64 ISA has the same semantics, so the corresponding JIT back-end
doesn't need to do extra work.
However, 32-bit arches (arm, x86, nfp etc.) and some other 64-bit arches
(PowerPC, SPARC etc) need to do explicit zero extension to meet this
requirement, otherwise code like the following will fail.
u64_value = (u64) u32_value
... other uses of u64_value
This is because compiler could exploit the semantic described above and
save those zero extensions for extending u32_value to u64_value, these JIT
back-ends are expected to guarantee this through inserting extra zero
extensions which however could be a significant increase on the code size.
Some benchmarks show there could be ~40% sub-register writes out of total
insns, meaning at least ~40% extra code-gen.
One observation is these extra zero extensions are not always necessary.
Take above code snippet for example, it is possible u32_value will never be
casted into a u64, the value of high 32-bit of u32_value then could be
ignored and extra zero extension could be eliminated.
This patch implements this idea, insns defining sub-registers will be
marked when the high 32-bit of the defined sub-register matters. For
those unmarked insns, it is safe to eliminate high 32-bit clearnace for
them.
Algo:
- Split read flags into READ32 and READ64.
- Record index of insn that does sub-register write. Keep the index inside
reg state and update it during verifier insn walking.
- A full register read on a sub-register marks its definition insn as
needing zero extension on dst register.
A new sub-register write overrides the old one.
- When propagating read64 during path pruning, also mark any insn defining
a sub-register that is read in the pruned path as full-register.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Here is another set of reviewed patches that adds SPDX tags to different
kernel files, based on a set of rules that are being used to parse the
comments to try to determine that the license of the file is
"GPL-2.0-or-later". Only the "obvious" versions of these matches are
included here, a number of "non-obvious" variants of text have been
found but those have been postponed for later review and analysis.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOgmlw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yk4rACfRqxGOGVLR/t6E9dDzOZRAdEz/mYAoJLZmziY
0YlSSSPtP5HI6JDh65Ng
=HXQb
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pule more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later".
Only the "obvious" versions of these matches are included here, a
number of "non-obvious" variants of text have been found but those
have been postponed for later review and analysis.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"
* tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98
...
This patch tries to solve the following specific use case.
Currently, bpf program can already collect stack traces
through kernel function get_perf_callchain()
when certain events happens (e.g., cache miss counter or
cpu clock counter overflows). But such stack traces are
not enough for jitted programs, e.g., hhvm (jited php).
To get real stack trace, jit engine internal data structures
need to be traversed in order to get the real user functions.
bpf program itself may not be the best place to traverse
the jit engine as the traversing logic could be complex and
it is not a stable interface either.
Instead, hhvm implements a signal handler,
e.g. for SIGALARM, and a set of program locations which
it can dump stack traces. When it receives a signal, it will
dump the stack in next such program location.
Such a mechanism can be implemented in the following way:
. a perf ring buffer is created between bpf program
and tracing app.
. once a particular event happens, bpf program writes
to the ring buffer and the tracing app gets notified.
. the tracing app sends a signal SIGALARM to the hhvm.
But this method could have large delays and causing profiling
results skewed.
This patch implements bpf_send_signal() helper to send
a signal to hhvm in real time, resulting in intended stack traces.
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The kernel test robot has reported that the use of __this_cpu_add()
causes bug messages like:
BUG: using __this_cpu_add() in preemptible [00000000] code: ...
Given the imprecise nature of the count and the possibility of resetting
the count and doing the measurement again, this is not really a big
problem to use the unprotected __this_cpu_*() functions.
To make the preemption checking code happy, the this_cpu_*() functions
will be used if CONFIG_DEBUG_PREEMPT is defined.
The imprecise nature of the locking counts are also documented with
the suggestion that we should run the measurement a few times with the
counts reset in between to get a better picture of what is going on
under the hood.
Fixes: a8654596f0 ("locking/rwsem: Enable lock event counting")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus reported an issue that doing an allmodconfig was causing the
kheaders archive to be regenerated even though the config is the same.
This patch fixes the issue by ignoring the config-related header files
for "knowing when to regenerate based on timestamps". Instead, if the
CONFIG_X_Y option really changes, then we there are the
include/config/X/Y.h which will already tells us "if a config really
changed". So we don't really need these files for regeneration detection
anyway, and ignoring them fixes Linus's issue.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kheaders archive consisting of the kernel headers used for compiling
bpf programs is in /proc. However there is concern that moving it here
will make it permanent. Let us move it to /sys/kernel as discussed [1].
[1] https://lore.kernel.org/patchwork/patch/1067310/#1265969
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this file is released under the gplv2 and any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.732920462@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public licence as published by
the free software foundation either version 2 of the licence or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 114 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.552531963@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While the IRQ/NMI will nest, the nest-count will be invariant over the
actual exception, since it will decrement equal to increment.
This means we can -- carefully -- use a regular variable since the
typical LOAD-STORE race doesn't exist (similar to preempt_count).
This optimizes the ring-buffer for all LOAD-STORE architectures, since
they need to use atomic ops to implement local_t.
Suggested-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Cc: yabinc@google.com
Link: http://lkml.kernel.org/r/20190517115418.481392777@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We must use {READ,WRITE}_ONCE() on rb->user_page data such that
concurrent usage will see whole values. A few key sites were missing
this.
Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: 7b732a7504 ("perf_counter: new output ABI - part 1")
Link: http://lkml.kernel.org/r/20190517115418.394192145@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Similar to how decrementing rb->next too early can cause data_head to
(temporarily) be observed to go backward, so too can this happen when
we increment too late.
This barrier() ensures the rb->head load happens after the increment,
both the one in the 'goto again' path, as the one from
perf_output_get_handle() -- albeit very unlikely to matter for the
latter.
Suggested-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: mark.rutland@arm.com
Cc: namhyung@kernel.org
Fixes: ef60777c9a ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.309516009@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In perf_output_put_handle(), an IRQ/NMI can happen in below location and
write records to the same ring buffer:
...
local_dec_and_test(&rb->nest)
... <-- an IRQ/NMI can happen here
rb->user_page->data_head = head;
...
In this case, a value A is written to data_head in the IRQ, then a value
B is written to data_head after the IRQ. And A > B. As a result,
data_head is temporarily decreased from A to B. And a reader may see
data_head < data_tail if it read the buffer frequently enough, which
creates unexpected behaviors.
This can be fixed by moving dec(&rb->nest) to after updating data_head,
which prevents the IRQ/NMI above from updating data_head.
[ Split up by peterz. ]
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: mark.rutland@arm.com
Fixes: ef60777c9a ("perf: Optimize the perf_output() path by removing IRQ-disables")
Link: http://lkml.kernel.org/r/20190517115418.224478157@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
All prune points inside a callee bpf function most likely will have
different callsites. For example, if function foo() is called from
two callsites the half of explored states in all prune points in foo()
will be useless for subsequent walking of one of those callsites.
Fortunately explored_states pruning heuristics keeps the number of states
per prune point small, but walking these states is still a waste of cpu
time when the callsite of the current state is different from the callsite
of the explored state.
To improve pruning logic convert explored_states into hash table and
use simple insn_idx ^ callsite hash to select hash bucket.
This optimization has no effect on programs without bpf2bpf calls
and drastically improves programs with calls.
In the later case it reduces total memory consumption in 1M scale tests
by almost 3 times (peak_states drops from 5752 to 2016).
Care should be taken when comparing the states for equivalency.
Since the same hash bucket can now contain states with different indices
the insn_idx has to be part of verifier_state and compared.
Different hash table sizes and different hash functions were explored,
but the results were not significantly better vs this patch.
They can be improved in the future.
Hit/miss heuristic is not counting index miscompare as a miss.
Otherwise verifier stats become unstable when experimenting
with different hash functions.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
split explored_states into prune_point boolean mark
and link list of explored states.
This removes STATE_LIST_MARK hack and allows marks to be separate from states.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
clean up explored_states to prep for introduction of hashtable
No functional changes.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The limit of 1024 subsequent jumps was causing otherwise valid
programs to be rejected. Bump it to 8192 and make the error more verbose.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Here are series of patches that add SPDX tags to different kernel files,
based on two different things:
- SPDX entries are added to a bunch of files that we missed a year ago
that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the last
big sweep, or they were Makefile/Kconfig files, which we didn't
touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on the
patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the next
few weeks as the tools and reviewers crunch through the more "odd"
variants of how to say "GPLv2" that developers have come up with over
the years, combined with other fun oddities (GPL + a BSD disclaimer?)
that are being unearthed, with the goal for the whole kernel to be
cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXOP8uw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynmGQCgy3evqzleuOITDpuWaxewFdHqiJYAnA7KRw4H
1KwtfRnMtG6dk/XaS7H7
=O9lH
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull SPDX update from Greg KH:
"Here is a series of patches that add SPDX tags to different kernel
files, based on two different things:
- SPDX entries are added to a bunch of files that we missed a year
ago that do not have any license information at all.
These were either missed because the tool saw the MODULE_LICENSE()
tag, or some EXPORT_SYMBOL tags, and got confused and thought the
file had a real license, or the files have been added since the
last big sweep, or they were Makefile/Kconfig files, which we
didn't touch last time.
- Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan
tools can determine the license text in the file itself. Where this
happens, the license text is removed, in order to cut down on the
700+ different ways we have in the kernel today, in a quest to get
rid of all of these.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers.
The reason for these "large" patches is if we were to continue to
progress at the current rate of change in the kernel, adding license
tags to individual files in different subsystems, we would be finished
in about 10 years at the earliest.
There will be more series of these types of patches coming over the
next few weeks as the tools and reviewers crunch through the more
"odd" variants of how to say "GPLv2" that developers have come up with
over the years, combined with other fun oddities (GPL + a BSD
disclaimer?) that are being unearthed, with the goal for the whole
kernel to be cleaned up.
These diffstats are not small, 3840 files are touched, over 10k lines
removed in just 24 patches"
* tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3
...
Without this check a snapshot is taken whenever a bucket's max is hit,
rather than only when the global max is hit, as it should be.
Before:
In this example, we do a first run of the workload (cyclictest),
examine the output, note the max ('triggering value') (347), then do
a second run and note the max again.
In this case, the max in the second run (39) is below the max in the
first run, but since we haven't cleared the histogram, the first max
is still in the histogram and is higher than any other max, so it
should still be the max for the snapshot. It isn't however - the
value should still be 347 after the second run.
# echo 'hist:keys=pid:ts0=common_timestamp.usecs if comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:onmax($wakeup_lat).save(next_prio,next_comm,prev_pid,prev_prio,prev_comm):onmax($wakeup_lat).snapshot() if next_comm=="cyclictest"' >> /sys/kernel/debug/tracing/events/sched/sched_switch/trigger
# cyclictest -p 80 -n -s -t 2 -D 2
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
{ next_pid: 2143 } hitcount: 199
max: 44 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/4
{ next_pid: 2145 } hitcount: 1325
max: 38 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/2
{ next_pid: 2144 } hitcount: 1982
max: 347 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
Snapshot taken (see tracing/snapshot). Details:
triggering value { onmax($wakeup_lat) }: 347
triggered by event with key: { next_pid: 2144 }
# cyclictest -p 80 -n -s -t 2 -D 2
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
{ next_pid: 2143 } hitcount: 199
max: 44 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/4
{ next_pid: 2148 } hitcount: 199
max: 16 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/1
{ next_pid: 2145 } hitcount: 1325
max: 38 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/2
{ next_pid: 2150 } hitcount: 1326
max: 39 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/4
{ next_pid: 2144 } hitcount: 1982
max: 347 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
{ next_pid: 2149 } hitcount: 1983
max: 130 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/0
Snapshot taken (see tracing/snapshot). Details:
triggering value { onmax($wakeup_lat) }: 39
triggered by event with key: { next_pid: 2150 }
After:
In this example, we do a first run of the workload (cyclictest),
examine the output, note the max ('triggering value') (375), then do
a second run and note the max again.
In this case, the max in the second run is still 375, the highest in
any bucket, as it should be.
# cyclictest -p 80 -n -s -t 2 -D 2
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
{ next_pid: 2072 } hitcount: 200
max: 28 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/5
{ next_pid: 2074 } hitcount: 1323
max: 375 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/2
{ next_pid: 2073 } hitcount: 1980
max: 153 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
Snapshot taken (see tracing/snapshot). Details:
triggering value { onmax($wakeup_lat) }: 375
triggered by event with key: { next_pid: 2074 }
# cyclictest -p 80 -n -s -t 2 -D 2
# cat /sys/kernel/debug/tracing/events/sched/sched_switch/hist
{ next_pid: 2101 } hitcount: 199
max: 49 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
{ next_pid: 2072 } hitcount: 200
max: 28 next_prio: 120 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/5
{ next_pid: 2074 } hitcount: 1323
max: 375 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/2
{ next_pid: 2103 } hitcount: 1325
max: 74 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/4
{ next_pid: 2073 } hitcount: 1980
max: 153 next_prio: 19 next_comm: cyclictest
prev_pid: 0 prev_prio: 120 prev_comm: swapper/6
{ next_pid: 2102 } hitcount: 1981
max: 84 next_prio: 19 next_comm: cyclictest
prev_pid: 12 prev_prio: 120 prev_comm: kworker/0:1
Snapshot taken (see tracing/snapshot). Details:
triggering value { onmax($wakeup_lat) }: 375
triggered by event with key: { next_pid: 2074 }
Link: http://lkml.kernel.org/r/95958351329f129c07504b4d1769c47a97b70d65.1555597045.git.tom.zanussi@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: a3785b7eca ("tracing: Add hist trigger snapshot() action")
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
There's an existing check for variable references in keys, but it
doesn't go far enough. It checks whether a key field is a variable
reference but doesn't check whether it's an expression containing
variable references, which can cause the same problems for callers.
Use the existing field_has_hist_vars() function rather than a direct
top-level flag check to catch all possible variable references.
Link: http://lkml.kernel.org/r/e8c3d3d53db5ca90ceea5a46e5413103a6902fc7.1555597045.git.tom.zanussi@linux.intel.com
Cc: stable@vger.kernel.org
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Reported-by: Vincent Bernat <vincent@bernat.ch>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
hist_field_var_ref() is an implementation of hist_field_fn_t(), which
can be called with a null tracing_map_elt elt param when assembling a
key in event_hist_trigger().
In the case of hist_field_var_ref() this doesn't make sense, because a
variable can only be resolved by looking it up using an already
assembled key i.e. a variable can't be used to assemble a key since
the key is required in order to access the variable.
Upper layers should prevent the user from constructing a key using a
variable in the first place, but in case one slips through, it
shouldn't cause a NULL pointer dereference. Also if one does slip
through, we want to know about it, so emit a one-time warning in that
case.
Link: http://lkml.kernel.org/r/64ec8dc15c14d305295b64cdfcc6b2b9dd14753f.1555597045.git.tom.zanussi@linux.intel.com
Reported-by: Vincent Bernat <vincent@bernat.ch>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it would be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 6 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154043.007767574@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see http www gnu org licenses
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details [based]
[from] [clk] [highbank] [c] you should have received a copy of the
gnu general public license along with this program if not see http
www gnu org licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 355 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.837383322@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not you can access it online at http www gnu
org licenses gpl 2 0 html
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190519154041.430943677@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all files which:
- Have no license information of any form
- Have EXPORT_.*_SYMBOL_GPL inside which was used in the
initial scan/conversion to ignore the file
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull networking fixes from David Miller:1) Use after free in __dev_map_entry_free(), from Eric Dumazet.
1) Use after free in __dev_map_entry_free(), from Eric Dumazet.
2) Fix TCP retransmission timestamps on passive Fast Open, from Yuchung
Cheng.
3) Orphan NFC, we'll take the patches directly into my tree. From
Johannes Berg.
4) We can't recycle cloned TCP skbs, from Eric Dumazet.
5) Some flow dissector bpf test fixes, from Stanislav Fomichev.
6) Fix RCU marking and warnings in rhashtable, from Herbert Xu.
7) Fix some potential fib6 leaks, from Eric Dumazet.
8) Fix a _decode_session4 uninitialized memory read bug fix that got
lost in a merge. From Florian Westphal.
9) Fix ipv6 source address routing wrt. exception route entries, from
Wei Wang.
10) The netdev_xmit_more() conversion was not done %100 properly in mlx5
driver, fix from Tariq Toukan.
11) Clean up botched merge on netfilter kselftest, from Florian
Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (74 commits)
of_net: fix of_get_mac_address retval if compiled without CONFIG_OF
net: fix kernel-doc warnings for socket.c
net: Treat sock->sk_drops as an unsigned int when printing
kselftests: netfilter: fix leftover net/net-next merge conflict
mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM
mlxsw: core: Prevent QSFP module initialization for old hardware
vsock/virtio: Initialize core virtio vsock before registering the driver
net/mlx5e: Fix possible modify header actions memory leak
net/mlx5e: Fix no rewrite fields with the same match
net/mlx5e: Additional check for flow destination comparison
net/mlx5e: Add missing ethtool driver info for representors
net/mlx5e: Fix number of vports for ingress ACL configuration
net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled
net/mlx5e: Fix wrong xmit_more application
net/mlx5: Fix peer pf disable hca command
net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index
net/mlx5: Add meaningful return codes to status_to_err function
net/mlx5: Imply MLXFW in mlx5_core
Revert "tipc: fix modprobe tipc failed after switch order of device registration"
vsock/virtio: free packets during the socket release
...
Merge yet more updates from Andrew Morton:
"A few final bits:
- large changes to vmalloc, yielding large performance benefits
- tweak the console-flush-on-panic code
- a few fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
panic: add an option to replay all the printk message in buffer
initramfs: don't free a non-existent initrd
fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount
mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock
mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro
mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro
mm/vmalloc.c: keep track of free blocks for vmap allocation
Pull IRQ chip updates from Ingo Molnar:
"A late irqchips update:
- New TI INTR/INTA set of drivers
- Rewrite of the stm32mp1-exti driver as a platform driver
- Update the IOMMU MSI mapping API to be RT friendly
- A number of cleanups and other low impact fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
arm64: arch_k3: Enable interrupt controller drivers
irqchip/ti-sci-inta: Add msi domain support
soc: ti: Add MSI domain bus support for Interrupt Aggregator
irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
irqchip/ti-sci-intr: Add support for Interrupt Router driver
dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
gpio: thunderx: Use the default parent apis for {request,release}_resources
genirq: Introduce irq_chip_{request,release}_resource_parent() apis
firmware: ti_sci: Add helper apis to manage resources
firmware: ti_sci: Add RM mapping table for am654
firmware: ti_sci: Add support for IRQ management
firmware: ti_sci: Add support for RM core ops
...
Miroslav reported that the livepatch self-tests were failing, specifically
a case in which the consistency model ensures that a current executing
function is not allowed to be patched, "TEST: busy target module".
Recent renovations of stack_trace_save_tsk_reliable() left it returning
only an -ERRNO success indication in some configuration combinations:
klp_check_stack()
ret = stack_trace_save_tsk_reliable()
#ifdef CONFIG_ARCH_STACKWALK && CONFIG_HAVE_RELIABLE_STACKTRACE
stack_trace_save_tsk_reliable()
ret = arch_stack_walk_reliable()
return 0
return -EINVAL
...
return ret;
...
if (ret < 0)
/* stack_trace_save_tsk_reliable error */
nr_entries = ret; << 0
Previously (and currently for !CONFIG_ARCH_STACKWALK &&
CONFIG_HAVE_RELIABLE_STACKTRACE) stack_trace_save_tsk_reliable() returned
the number of entries that it consumed in the passed storage array.
In the case of the above config and trace, be sure to return the
stacktrace_cookie.len on stack_trace_save_tsk_reliable() success.
Fixes: 25e39e32b0 ("livepatch: Simplify stack trace retrieval")
Reported-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: live-patching@vger.kernel.org
Cc: jikos@kernel.org
Cc: pmladek@suse.com
Link: https://lkml.kernel.org/r/20190517185117.24642-1-joe.lawrence@redhat.com
Currently on panic, kernel will lower the loglevel and print out pending
printk msg only with console_flush_on_panic().
Add an option for users to configure the "panic_print" to replay all
dmesg in buffer, some of which they may have never seen due to the
loglevel setting, which will help panic debugging .
[feng.tang@intel.com: keep the original console_flush_on_panic() inside panic()]
Link: http://lkml.kernel.org/r/1556199137-14163-1-git-send-email-feng.tang@intel.com
[feng.tang@intel.com: use logbuf lock to protect the console log index]
Link: http://lkml.kernel.org/r/1556269868-22654-1-git-send-email-feng.tang@intel.com
Link: http://lkml.kernel.org/r/1556095872-36838-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cgroup fix from Tejun Heo:
"The cgroup2 freezer pulled in this cycle broke strace. This pull
request includes a workaround for the problem.
It's not a complete fix in that it may cause spurious frozen state
flip-flops which is fairly minor. Will push a full fix once it's
ready"
* 'for-5.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
signal: unconditionally leave the frozen state in ptrace_stop()
For iptable module to load a bpf program from a pinned location, it
only retrieve a loaded program and cannot change the program content so
requiring a write permission for it might not be necessary.
Also when adding or removing an unrelated iptable rule, it might need to
flush and reload the xt_bpf related rules as well and triggers the inode
permission check. It might be better to remove the write premission
check for the inode so we won't need to grant write access to all the
processes that flush and restore iptables rules.
Signed-off-by: Chenbo Feng <fengc@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull time fixes from Ingo Molnar:
"A TIA adjtimex interface extension, and a POSIX compliance ABI fix for
timespec64 users"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ntp: Allow TAI-UTC offset to be set to zero
y2038: Make CONFIG_64BIT_TIME unconditional
Pull locking fix from Ingo Molnar:
"A single rwsem fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Prevent decrement of reader count before increment
Alex Xu reported a regression in strace, caused by the introduction of
the cgroup v2 freezer. The regression can be reproduced by stracing
the following simple program:
#include <unistd.h>
int main() {
write(1, "a", 1);
return 0;
}
An attempt to run strace ./a.out leads to the infinite loop:
[ pre-main omitted ]
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
write(1, "a", 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
[ repeats forever ]
The problem occurs because the traced task leaves ptrace_stop()
(and the signal handling loop) with the frozen bit set. So let's
call cgroup_leave_frozen(true) unconditionally after sleeping
in ptrace_stop().
With this patch applied, strace works as expected:
[ pre-main omitted ]
write(1, "a", 1) = 1
exit_group(0) = ?
+++ exited with 0 +++
Reported-by: Alex Xu <alex_y_xu@yahoo.ca>
Fixes: 76f969e894 ("cgroup: cgroup v2 freezer")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2019-05-16
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a use after free in __dev_map_entry_free(), from Eric.
2) Several sockmap related bug fixes: a splat in strparser if
it was never initialized, remove duplicate ingress msg list
purging which can race, fix msg->sg.size accounting upon
skb to msg conversion, and last but not least fix a timeout
bug in tcp_bpf_wait_data(), from John.
3) Fix LRU map to avoid messing with eviction heuristics upon
syscall lookup, e.g. map walks from user space side will
then lead to eviction of just recently created entries on
updates as it would mark all map entries, from Daniel.
4) Don't bail out when libbpf feature probing fails. Also
various smaller fixes to flow_dissector test, from Stanislav.
5) Fix missing brackets for BTF_INT_OFFSET() in UAPI, from Gary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Removing of non-DYNAMIC_FTRACE from 32bit x86
- Removing of mcount support from x86
- Emulating a call from int3 on x86_64, fixes live kernel patching
- Consolidated Tracing Error logs file
Minor updates:
- Removal of klp_check_compiler_support()
- kdb ftrace dumping output changes
- Accessing and creating ftrace instances from inside the kernel
- Clean up of #define if macro
- Introduction of TRACE_EVENT_NOP() to disable trace events based on config
options
And other minor fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXNxMZxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qq4PAP44kP6VbwL8CHyI2A3xuJ6Hwxd+2Z2r
ip66RtzyJ+2iCgEA2QCuWUlEt2bLpF9a8IQ4N9tWenSeW2i7gunPb+tioQw=
=RVQo
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The major changes in this tracing update includes:
- Removal of non-DYNAMIC_FTRACE from 32bit x86
- Removal of mcount support from x86
- Emulating a call from int3 on x86_64, fixes live kernel patching
- Consolidated Tracing Error logs file
Minor updates:
- Removal of klp_check_compiler_support()
- kdb ftrace dumping output changes
- Accessing and creating ftrace instances from inside the kernel
- Clean up of #define if macro
- Introduction of TRACE_EVENT_NOP() to disable trace events based on
config options
And other minor fixes and clean ups"
* tag 'trace-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
x86: Hide the int3_emulate_call/jmp functions from UML
livepatch: Remove klp_check_compiler_support()
ftrace/x86: Remove mcount support
ftrace/x86_32: Remove support for non DYNAMIC_FTRACE
tracing: Simplify "if" macro code
tracing: Fix documentation about disabling options using trace_options
tracing: Replace kzalloc with kcalloc
tracing: Fix partial reading of trace event's id file
tracing: Allow RCU to run between postponed startup tests
tracing: Fix white space issues in parse_pred() function
tracing: Eliminate const char[] auto variables
ring-buffer: Fix mispelling of Calculate
tracing: probeevent: Fix to make the type of $comm string
tracing: probeevent: Do not accumulate on ret variable
tracing: uprobes: Re-enable $comm support for uprobe events
ftrace/x86_64: Emulate call function while updating in breakpoint handler
x86_64: Allow breakpoints to emulate call instructions
x86_64: Add gap to int3 to allow for call emulation
tracing: kdb: Allow ftdump to skip all but the last few entries
tracing: Add trace_total_entries() / trace_total_entries_cpu()
...
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
This patch aims to suppress 3 missing-break-in-switch false positives
on some architectures.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge more updates from Andrew Morton:
- a couple of hotfixes
- almost all of the rest of MM
- lib/ updates
- binfmt_elf updates
- autofs updates
- quite a lot of misc fixes and updates
- reiserfs, fatfs
- signals
- exec
- cpumask
- rapidio
- sysctl
- pids
- eventfd
- gcov
- panic
- pps
- gdb script updates
- ipc updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (126 commits)
mm: memcontrol: fix NUMA round-robin reclaim at intermediate level
mm: memcontrol: fix recursive statistics correctness & scalabilty
mm: memcontrol: move stat/event counting functions out-of-line
mm: memcontrol: make cgroup stats and events query API explicitly local
drivers/virt/fsl_hypervisor.c: prevent integer overflow in ioctl
drivers/virt/fsl_hypervisor.c: dereferencing error pointers in ioctl
mm, memcg: rename ambiguously named memory.stat counters and functions
arch: remove <asm/sizes.h> and <asm-generic/sizes.h>
treewide: replace #include <asm/sizes.h> with #include <linux/sizes.h>
fs/block_dev.c: Remove duplicate header
fs/cachefiles/namei.c: remove duplicate header
include/linux/sched/signal.h: replace `tsk' with `task'
fs/coda/psdev.c: remove duplicate header
ipc: do cyclic id allocation for the ipc object.
ipc: conserve sequence numbers in ipcmni_extend mode
ipc: allow boot time extension of IPCMNI from 32k to 16M
ipc/mqueue: optimize msg_get()
ipc/mqueue: remove redundant wq task assignment
ipc: prevent lockup on alloc_msg and free_msg
scripts/gdb: print cached rate in lx-clk-summary
...
Allow specifying reboot_mode for panic only. This is needed on systems
where ramoops is used to store panic logs, and user wants to use warm
reset to preserve those, while still having cold reset on normal
reboots.
Link: http://lkml.kernel.org/r/20190322004735.27702-1-aaro.koskinen@iki.fi
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When kernel panic happens, it will first print the panic call stack,
then the ending msg like:
[ 35.743249] ---[ end Kernel panic - not syncing: Fatal exception
[ 35.749975] ------------[ cut here ]------------
The above message are very useful for debugging.
But if system is configured to not reboot on panic, say the
"panic_timeout" parameter equals 0, it will likely print out many noisy
message like WARN() call stack for each and every CPU except the panic
one, messages like below:
WARNING: CPU: 1 PID: 280 at kernel/sched/core.c:1198 set_task_cpu+0x183/0x190
Call Trace:
<IRQ>
try_to_wake_up
default_wake_function
autoremove_wake_function
__wake_up_common
__wake_up_common_lock
__wake_up
wake_up_klogd_work_func
irq_work_run_list
irq_work_tick
update_process_times
tick_sched_timer
__hrtimer_run_queues
hrtimer_interrupt
smp_apic_timer_interrupt
apic_timer_interrupt
For people working in console mode, the screen will first show the panic
call stack, but immediately overridden by these noisy extra messages,
which makes debugging much more difficult, as the original context gets
lost on screen.
Also these noisy messages will confuse some users, as I have seen many bug
reporters posted the noisy message into bugzilla, instead of the real
panic call stack and context.
Adding a flag "suppress_printk" which gets set in panic() to avoid those
noisy messages, without changing current kernel behavior that both panic
blinking and sysrq magic key can work as is, suggested by Petr Mladek.
To verify this, make sure kernel is not configured to reboot on panic and
in console
# echo c > /proc/sysrq-trigger
to see if console only prints out the panic call stack.
Link: http://lkml.kernel.org/r/1551430186-24169-1-git-send-email-feng.tang@intel.com
Signed-off-by: Feng Tang <feng.tang@intel.com>
Suggested-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
LLVM uses profiling data that's deliberately similar to GCC, but has a
very different way of exporting that data. LLVM calls llvm_gcov_init()
once per module, and provides a couple of callbacks that we can use to
ask for more data.
We care about the "writeout" callback, which in turn calls back into
compiler-rt/this module to dump all the gathered coverage data to disk:
llvm_gcda_start_file()
llvm_gcda_emit_function()
llvm_gcda_emit_arcs()
llvm_gcda_emit_function()
llvm_gcda_emit_arcs()
[... repeats for each function ...]
llvm_gcda_summary_info()
llvm_gcda_end_file()
This design is much more stateless and unstructured than gcc's, and is
intended to run at process exit. This forces us to keep some local
state about which module we're dealing with at the moment. On the other
hand, it also means we don't depend as much on how LLVM represents
profiling data internally.
See LLVM's lib/Transforms/Instrumentation/GCOVProfiling.cpp for more
details on how this works, particularly GCOVProfiler::emitProfileArcs(),
GCOVProfiler::insertCounterWriteout(), and GCOVProfiler::insertFlush().
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20190417225328.208129-1-trong@android.com
Signed-off-by: Greg Hackmann <ghackmann@android.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tri Vo <trong@android.com>
Co-developed-by: Nick Desaulniers <ndesaulniers@google.com>
Co-developed-by: Tri Vo <trong@android.com>
Tested-by: Trilok Soni <tsoni@quicinc.com>
Tested-by: Prasad Sodagudi <psodagud@quicinc.com>
Tested-by: Tri Vo <trong@android.com>
Tested-by: Daniel Mentz <danielmentz@google.com>
Tested-by: Petri Gynther <pgynther@google.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "gcov: add Clang support", v4.
This patch (of 3):
base.c contains a few callbacks specific to GCC's gcov implementation.
Move these into their own module in preparation for Clang support.
Link: http://lkml.kernel.org/r/20190318025411.98014-2-trong@android.com
Signed-off-by: Greg Hackmann <ghackmann@android.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Tri Vo <trong@android.com>
Tested-by: Trilok Soni <tsoni@quicinc.com>
Tested-by: Prasad Sodagudi <psodagud@quicinc.com>
Tested-by: Tri Vo <trong@android.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Daniel Mentz <danielmentz@google.com>
Cc: Petri Gynther <pgynther@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Borkmann
Tejun Heo
Thomas Gleixner
Christian Brauner
Colin Ian King
Jiri Kosina
Rafael J. Wysocki
Linus Torvalds
Zhenliang Wei
Chris Down
Michal Koutný
Kefeng Wang
David S. Miller
Roman Gushchin
brakmo
Eric W. Biederman
Stanislav Fomichev
Ingo Molnar
Tomas Bortoli
Yonghong Song
Miguel Ojeda
Jiong Wang
Waiman Long
Joel Fernandes (Google)
Peter Zijlstra
Yabin Cui
Alexei Starovoitov
Jagadeesh Pagadala
Tom Zanussi
Joe Lawrence
Feng Tang
Chenbo Feng
Stephen Rothwell
Aaro Koskinen
Greg Hackmann