[ Upstream commit 9bf7123bb0 ]
Many DSI panel drivers fail to clean up their panel references on
mipi_dsi_attach() failure, so we're leaving a dangling drm_panel
reference to freed memory. Clean that up on failure.
Noticed by inspection, after seeing similar problems on other drivers.
Therefore, I'm not marking Fixes/stable.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210923173336.3.If9e74fa9b1d6eaa9e0e5b95b2b957b992740251c@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75d9b8559a ]
Fault injection test reported memory leak of hci device as follows:
unreferenced object 0xffff88800b858000 (size 8192):
comm "kworker/0:2", pid 167, jiffies 4294955747 (age 557.148s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 ad 4e ad de .............N..
backtrace:
[<0000000070eb1059>] kmem_cache_alloc_trace mm/slub.c:3208
[<00000000015eb521>] hci_alloc_dev_priv include/linux/slab.h:591
[<00000000dcfc1e21>] bpa10x_probe include/net/bluetooth/hci_core.h:1240
[<000000005d3028c7>] usb_probe_interface drivers/usb/core/driver.c:397
[<00000000cbac9243>] really_probe drivers/base/dd.c:517
[<0000000024cab3f0>] __driver_probe_device drivers/base/dd.c:751
[<00000000202135cb>] driver_probe_device drivers/base/dd.c:782
[<000000000761f2bc>] __device_attach_driver drivers/base/dd.c:899
[<00000000f7d63134>] bus_for_each_drv drivers/base/bus.c:427
[<00000000c9551f0b>] __device_attach drivers/base/dd.c:971
[<000000007f79bd16>] bus_probe_device drivers/base/bus.c:487
[<000000007bb8b95a>] device_add drivers/base/core.c:3364
[<000000009564d9ea>] usb_set_configuration drivers/usb/core/message.c:2171
[<00000000e4657087>] usb_generic_driver_probe drivers/usb/core/generic.c:239
[<0000000071ede518>] usb_probe_device drivers/usb/core/driver.c:294
[<00000000cbac9243>] really_probe drivers/base/dd.c:517
hci_alloc_dev() do not init the device's flag. And hci_free_dev()
using put_device() to free the memory allocated for this device,
but it calls just put_device(dev) only in case of HCI_UNREGISTER
flag is set, So any error handing before hci_register_dev() success
will cause memory leak.
To avoid this behaviour we can using kfree() to release dev before
hci_register_dev() success.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a4bb6a8e9 ]
Fault injection test report debugfs entry leak as follows:
debugfs: Directory 'hci0' with parent 'bluetooth' already present!
When register_pm_notifier() failed in hci_register_dev(), the debugfs
create by debugfs_create_dir() do not removed in the error handing path.
Add the remove debugfs code to fix it.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e87a8da74 ]
Commit a5d3d1adc9 ("leds: lp55xx: Initialize enable GPIO direction to
output") attempts to fix this, but the fix did not work since at least
for the Nokia N900 the value needs to be set to HIGH, per the device
tree. So rather than hardcoding the value to a potentially invalid value
for some devices, let's set direction in lp55xx_init_device.
Fixes: a5d3d1adc9 ("leds: lp55xx: Initialize enable GPIO direction to output")
Fixes: 92a81562e6 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3c9 ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9af026a3b ]
Since the LED multicolor framework support was added in commit
92a81562e6 ("leds: lp55xx: Add multicolor framework support to lp55xx")
LEDs on this platform stopped working.
Fixes: 92a81562e6 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Fixes: ac219bf3c9 ("leds: lp55xx: Convert to use GPIO descriptors")
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5c7440fe7 ]
Fix the following build issues:
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_internal':
decompress.c:(.text.FSE_buildDTable_internal+0x2cc): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `BIT_initDStream':
decompress.c:(.text.BIT_initDStream+0x7c): undefined reference to `__clzdi2'
mips64el-linux-ld: decompress.c:(.text.BIT_initDStream+0x158): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_buildFSETable_body_default.constprop.0':
decompress.c:(.text.ZSTD_buildFSETable_body_default.constprop.0+0x2a8): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_readNCount_body_default':
decompress.c:(.text.FSE_readNCount_body_default+0x130): undefined reference to `__ctzdi2'
mips64el-linux-ld: decompress.c:(.text.FSE_readNCount_body_default+0x1a4): undefined reference to `__ctzdi2'
mips64el-linux-ld: decompress.c:(.text.FSE_readNCount_body_default+0x2e4): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `HUF_readStats_body_default':
decompress.c:(.text.HUF_readStats_body_default+0x184): undefined reference to `__clzdi2'
mips64el-linux-ld: decompress.c:(.text.HUF_readStats_body_default+0x1b4): undefined reference to `__clzdi2'
mips64el-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_DCtx_getParameter':
decompress.c:(.text.ZSTD_DCtx_getParameter+0x60): undefined reference to `__clzdi2'
Fixes: a510b61613 ("MIPS: Add support for ZSTD-compressed kernels")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbf3bce458 ]
Just like before with __bswapdi2(), for MIPS pre-boot when
CONFIG_KERNEL_ZSTD=y the decompressor function will use __ashldi3(), so
the object file should be added to the target object file.
Fixes these build errors:
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_internal':
decompress.c:(.text.FSE_buildDTable_internal+0x48): undefined reference to `__ashldi3'
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_decompress_wksp_body_default':
decompress.c:(.text.FSE_decompress_wksp_body_default+0xa8): undefined reference to `__ashldi3'
mipsel-linux-ld: arch/mips/boot/compressed/decompress.o: in function `ZSTD_getFrameHeader_advanced':
decompress.c:(.text.ZSTD_getFrameHeader_advanced+0x134): undefined reference to `__ashldi3'
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da17d6905d ]
In commit 8a5a75e5e9 ("of/fdt: Make sure no-map does not remove
already reserved regions") we returned -EBUSY when trying to mark
regions as no-map when they intersect with reserved memory. The goal was
to find bad no-map reserved memory DT nodes that would unmap the kernel
text/data sections.
The problem is the reserved memory check will still trigger if the DT
has a /memreserve/ that completely subsumes the no-map memory carveouts
in the reserved memory node _and_ that region is also not part of the
memory reg property. For example in sc7180.dtsi we have the following
reserved-memory and memory node:
memory@80000000 {
/* We expect the bootloader to fill in the size */
reg = <0 0x80000000 0 0>;
};
smem_mem: memory@80900000 {
reg = <0x0 0x80900000 0x0 0x200000>;
no-map;
};
and the memreserve filled in by the bootloader is
/memreserve/ 0x80800000 0x400000;
while the /memory node is transformed into
memory@80000000 {
/* The bootloader fills in the size, and adds another region */
reg = <0 0x80000000 0 0x00800000>,
<0 0x80c00000 0 0x7f200000>;
};
The smem region is doubly reserved via /memreserve/ and by not being
part of the /memory reg property. This leads to the following warning
printed at boot.
OF: fdt: Reserved memory: failed to reserve memory for node 'memory@80900000': base 0x0000000080900000, size 2 MiB
Otherwise nothing really goes wrong because the smem region is not going
to be mapped by the kernel's direct linear mapping given that it isn't
part of the memory node. Therefore, let's only consider this to be a
problem if we're trying to mark a region as no-map and it is actually
memory that we're intending to keep out of the kernel's direct mapping
but it's already been reserved.
Acked-by: Mike Rapoport <rppt@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Quentin Perret <qperret@google.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Fixes: 8a5a75e5e9 ("of/fdt: Make sure no-map does not remove already reserved regions")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220107194233.2793146-1-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94a4950a4a ]
The cell_count field of of_phandle_iterator is the number of cells we
expect in the phandle arguments list when cells_name is missing. The
error message should show the number of cells we actually see.
Fixes: af3be70a32 ("of: Improve of_phandle_iterator_next() error message")
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/96519ac55be90a63fa44afe01480c30d08535465.1640881913.git.baruch@tkos.co.il
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c861c1be38 ]
bm1880_clk_unregister_pll & bm1880_clk_unregister_div both try to
free statically allocated variables, so remove those kfrees.
For example, if we take L703 kfree(div_hw):
- div_hw is a bm1880_div_hw_clock pointer
- in bm1880_clk_register_plls this is pointed to an element of arg1:
struct bm1880_div_hw_clock *clks
- in the probe, where bm1880_clk_register_plls is called arg1 is
bm1880_div_clks, defined on L371:
static struct bm1880_div_hw_clock bm1880_div_clks[]
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Fixes: 1ab4601da5 ("clk: Add common clock driver for BM1880 SoC")
Link: https://lore.kernel.org/r/20211223154244.1024062-1-conor.dooley@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3203863434 ]
According to RM, the clock divider range is from 1 to 8, clock
prescaling ratio may be any power of 2 from 1 to 128.
So the supported divider is not all the value between
1 and 1024, just limited value in that range.
Create table for the supported divder and add function to
check the clock divider is available by comparing with
the table.
Fixes: d0250cf4f2 ("ASoC: fsl_asrc: Add an option to select internal ratio mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641380883-20709-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3969341813 ]
According to RM, on auto mode:
For codec AK4458 and AK4497, the lowest ratio of MLCK/FS is 256
if sample rate is 8kHz-48kHz,
For codec AK5558, the lowest ratio of MLCK/FS is 512 if sample
rate is 8kHz-48kHz.
With these setting the sound quality for 8kHz-48kHz can be improved.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f331ae5fa5 ]
Transfer the refined slots and slot_width to akcodec_get_mclk_rate()
for mclk calculation, otherwise the mclk frequency does not match
with the slots and slot_width for S16_LE format, because the default
slot_width is 32.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3349b3d0c6 ]
The SAI on i.MX8MQ don't support one2one ratio for mclk:bclk, so
the mclk frequency exceeds the supported range of codec for
the case that sample rate is larger than 705kHZ and format is
S32_LE. Update the supported width for such case.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c337073d9 ]
The gcc cfg noc lpass clock is required to be always enabled for the
LPASS core and audio drivers to be functional.
Fixes: a3cc092196 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7280")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Link: https://lore.kernel.org/r/1640018638-19436-4-git-send-email-tdas@codeaurora.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e375b9c929 ]
The API for ib_query_qp requires the driver to set cur_qp_state on return,
add the missing set.
Fixes: 67bbc05512 ("RDMA/cxgb4: Add query_qp support")
Link: https://lore.kernel.org/r/20211220152530.60399-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57f234248f ]
The suspend code unconditionally sets ->hp_jack_in and ->mic_jack_in
to zero but without reporting this status change to the HDA core.
To compensate for this, always assume a status change on the
first unsol event after boot or resume.
Fixes: 424e531b47 ("ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary")
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Link: https://lore.kernel.org/r/20211231134432.atwmuzeceqiklcoa@cae.in-ulm.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cd0765717 ]
Commit c8b4f0865e reduced delays related to cs42l42 jack
detection. However, the change was too aggressive. As a result
internal speakers on DELL Inspirion 3501 are not detected.
Increase the delay in cs42l42_run_jack_detect() a bit.
Fixes: c8b4f0865e ("ALSA: hda/cs8409: Remove unnecessary delays")
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Link: https://lore.kernel.org/r/20211231131221.itwotyfk5qomn7n6@cae.in-ulm.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f03055d50 ]
The MIPS BMC63XX subarch does not provide/support clk_set_parent().
This causes build errors in a few drivers, so add a simple implementation
of that function so that callers of it will build without errors.
Fixes these build errors:
ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined!
ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined!
Fixes: e7300d04bd ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76f66dfd60 ]
Provide a simple implementation of clk_set_parent() in the lantiq
subarch so that callers of it will build without errors.
Fixes these build errors:
ERROR: modpost: "clk_set_parent" [sound/soc/jz4740/snd-soc-jz4740-i2s.ko] undefined!
ERROR: modpost: "clk_set_parent" [sound/soc/atmel/snd-soc-atmel-i2s.ko] undefined!
Fixes: 171bb2f19e ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
--to=linux-mips@vger.kernel.org --cc="John Crispin <john@phrozen.org>" --cc="Jonathan Cameron <jic23@kernel.org>" --cc="Russell King <linux@armlinux.org.uk>" --cc="Andy Shevchenko <andy.shevchenko@gmail.com>" --cc=alsa-devel@alsa-project.org --to="Thomas Bogendoerfer <tsbogend@alpha.franken.de>"
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 146b3a77af ]
Tegra194 does not really have "hda2codec_2x" related reset. Hence drop
this entry to reflect actual HW.
Fixes: 4878cc0c9f ("arm64: tegra: Add HDA controller on Tegra194")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1640260431-11613-4-git-send-email-spujar@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2355028c0c ]
Originally, the conditions for preventing reentry are not correct.
dai->component->active is not the state specifically for pcmif dai, so it
is not a correct condition to indicate the status of pcmif dai.
On the other hand, snd_soc_dai_stream_actvie() in prepare ops for both
playback and capture possibly return true at the first entry when these
two streams are opened at the same time.
In the patch, I refer to the implementation in mt8192-dai-pcm.c.
Clock and enabling bit for PCMIF are managed by DAPM, and the condition
for prepare ops is replaced by the status of dai widget.
Fixes: 1f95c01911 ("ASoC: mediatek: mt8195: support pcm in platform driver")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20211230084731.31372-2-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcee5ce50b ]
When firmware load failed, kernel report task hung as follows:
INFO: task xrun:5191 blocked for more than 147 seconds.
Tainted: G W 5.16.0-rc5-next-20211220+ #11
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:xrun state:D stack: 0 pid: 5191 ppid: 270 flags:0x00000004
Call Trace:
__schedule+0xc12/0x4b50 kernel/sched/core.c:4986
schedule+0xd7/0x260 kernel/sched/core.c:6369 (discriminator 1)
schedule_timeout+0x7aa/0xa80 kernel/time/timer.c:1857
wait_for_completion+0x181/0x290 kernel/sched/completion.c:85
lattice_ecp3_remove+0x32/0x40 drivers/misc/lattice-ecp3-config.c:221
spi_remove+0x72/0xb0 drivers/spi/spi.c:409
lattice_ecp3_remove() wait for signals from firmware loading, but when
load failed, firmware_load() does not send this signal. This cause
device remove hung. Fix it by sending signal even if load failed.
Fixes: 781551df57 ("misc: Add Lattice ECP3 FPGA configuration via SPI")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20211228125522.3122284-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ecb46755e ]
Because of the potential failure of the ioremap(), the buf->area could
be NULL.
Therefore, we need to check it and return -ENOMEM in order to transfer
the error.
Fixes: f09aecd50f ("ASoC: SAMSUNG: Add I2S0 internal dma driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211228034026.1659385-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da08aab940 ]
Fix get_parent() callback to return the correct index of the parent for
PLL_CMNLC1 clock. Add a separate table of register values corresponding
to the parent index for PLL_CMNLC1. Update set_parent() callback
accordingly.
Fixes: 28081b7285 ("phy: cadence: Sierra: Model PLL_CMNLC and PLL_CMNLC1 as clocks (mux clocks)")
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20211223060137.9252-12-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd1eaaaaa6 ]
When CONFIG_PPC_RFI_SRR_DEBUG=y we check the SRR values before returning
from interrupts. This is done in asm using EMIT_BUG_ENTRY, and passing
BUGFLAG_WARNING.
However that fails to create an exception table entry for the warning,
and so do_program_check() fails the exception table search and proceeds
to call _exception(), resulting in an oops like:
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 2 PID: 1204 Comm: sigreturn_unali Tainted: P 5.16.0-rc2-00194-g91ca3d4f77c5 #12
NIP: c00000000000c5b0 LR: 0000000000000000 CTR: 0000000000000000
...
NIP [c00000000000c5b0] system_call_common+0x150/0x268
LR [0000000000000000] 0x0
Call Trace:
[c00000000db73e10] [c00000000000c558] system_call_common+0xf8/0x268 (unreliable)
...
Instruction dump:
7cc803a6 888d0931 2c240000 4082001c 38800000 988d0931 e8810170 e8a10178
7c9a03a6 7cbb03a6 7d7a02a6 e9810170 <7f0b6088> 7d7b02a6 e9810178 7f0b6088
We should instead use EMIT_WARN_ENTRY, which creates an exception table
entry for the warning, allowing the warning to be correctly recognised,
and the code to resume after printing the warning.
Note however that because this warning is buried deep in the interrupt
return path, we are not able to recover from it (due to MSR_RI being
clear), so we still end up in die() with an unrecoverable exception.
Fixes: 59dc5bfca0 ("powerpc/64s: avoid reloading (H)SRR registers if they are still valid")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221135101.2085547-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 314f6c23dd ]
When CONFIG_PPC_RFI_SRR_DEBUG=y we check that NIP and SRR0 match when
returning from interrupts. This can trigger falsely if NIP has either of
its two low bits set via sigreturn or ptrace, while SRR0 has its low two
bits masked in hardware.
As a quick fix make sure to mask the low bits before doing the check.
Fixes: 59dc5bfca0 ("powerpc/64s: avoid reloading (H)SRR registers if they are still valid")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20211221135101.2085547-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9de2b9286a ]
Yes, you are right and now the return code depending on the
init_clks().
Fixes: 6078c65194 ("soc: mediatek: Refine scpsys to support multiple platform")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211222015157.1025853-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e1fcab00a ]
John Garry reported a deadlock that occurs when trying to access a
runtime-suspended SATA device. For obscure reasons, the rescan procedure
causes the link to be hard-reset, which disconnects the device.
The rescan tries to carry out a runtime resume when accessing the device.
scsi_rescan_device() holds the SCSI device lock and won't release it until
it can put commands onto the device's block queue. This can't happen until
the queue is successfully runtime-resumed or the device is unregistered.
But the runtime resume fails because the device is disconnected, and
__scsi_remove_device() can't do the unregistration because it can't get the
device lock.
The best way to resolve this deadlock appears to be to allow the block
queue to start running again even after an unsuccessful runtime resume.
The idea is that the driver or the SCSI error handler will need to be able
to use the queue to resolve the runtime resume failure.
This patch removes the err argument to blk_post_runtime_resume() and makes
the routine act as though the resume was successful always. This fixes the
deadlock.
Link: https://lore.kernel.org/r/1639999298-244569-4-git-send-email-chenxiang66@hisilicon.com
Fixes: e27829dc92 ("scsi: serialize ->rescan against ->remove")
Reported-and-tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8347b41748 ]
Currently, we parse the "linux,usable-memory-range" property in
early_init_dt_scan_chosen(), to obtain the specified memory range of the
crash kernel. We then reserve the required memory after
early_init_dt_scan_memory() has identified all available physical memory.
Because the two pieces of code are separated far, the readability and
maintainability are reduced. So bring them together.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
(change the prototype of early_init_dt_check_for_usable_mem_range(), in
order to use it outside)
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: John Donnelly <john.p.donnelly@oracle.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
To: devicetree@vger.kernel.org
To: linux-efi@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30e693ee82 ]
mt8195_cg_patch is used to reset the default value of audio cg, so the
register value could be consistent with CCF reference count.
Nevertheless, AUDIO_TOP_CON1[1:0] is used to control an internal mux,
and it's expected to keep the default value 0.
This patch corrects the default value in case an unexpected behavior
happens in the future.
Fixes: 6746cc8582 ("ASoC: mediatek: mt8195: add platform driver")
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20211216022424.28470-1-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d7061627d7 ]
It turns out to be possible for hotplugging out a device to reach the
stage of tearing down the device's group and default domain before the
domain's flush queue has drained naturally. At this point, it is then
possible for the timeout to expire just before the del_timer() call
in free_iova_flush_queue(), such that we then proceed to free the FQ
resources while fq_flush_timeout() is still accessing them on another
CPU. Crashes due to this have been observed in the wild while removing
NVMe devices.
Close the race window by using del_timer_sync() to safely wait for any
active timeout handler to finish before we start to free things. We
already avoid any locking in free_iova_flush_queue() since the FQ is
supposed to be inactive anyway, so the potential deadlock scenario does
not apply.
Fixes: 9a005a800a ("iommu/iova: Add flush timer")
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
[ rm: rewrite commit message ]
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/0a365e5b07f14b7344677ad6a9a734966a8422ce.1639753638.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a9a72e290 ]
After calling dmaengine_submit(), the submitted transfer descriptor
belongs to the DMA engine. Pointer to that descriptor may no longer be
valid after the call and should be tested before awaiting transfer
completion.
Reported-by: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 4fac9b31d0 ("ASoC: Intel: Add catpt base members")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211216115743.2130622-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 575f5cfb13 ]
iommu->intcapxt_notify field is no longer used
after a switch to a separate domain was done
Fixes: d1adcfbb52 ("iommu/amd: Fix IOMMU interrupt generation in X2APIC mode")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20211123161038.48009-6-mlevitsk@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1980105e3c ]
Use IRQCHIP_MASK_ON_SUSPEND to make the core irq code to
mask the iommu interrupt on suspend and unmask it on the resume.
Since now the unmask function updates the INTX settings,
that will restore them on resume from s3/s4.
Since IRQCHIP_MASK_ON_SUSPEND is only effective for interrupts
which are not wakeup sources, remove IRQCHIP_SKIP_SET_WAKE flag
and instead implement a dummy .irq_set_wake which doesn't allow
the interrupt to become a wakeup source.
Fixes: 6692981295 ("iommu/amd: Add support for X2APIC IOMMU interrupts")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20211123161038.48009-5-mlevitsk@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4691f79d62 ]
This is more logically correct and will also allow us to
to use mask/unmask logic to restore INTX setttings after
the resume from s3/s4.
Fixes: 6692981295 ("iommu/amd: Add support for X2APIC IOMMU interrupts")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20211123161038.48009-4-mlevitsk@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01b297a48a ]
Otherwise it is guaranteed to not work after the resume...
Fixes: 6692981295 ("iommu/amd: Add support for X2APIC IOMMU interrupts")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20211123161038.48009-3-mlevitsk@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8d4a37d1b ]
This will give IOMMU GA log a chance to work after resume
from s3/s4.
Fixes: 8bda0cfbdc ("iommu/amd: Detect and initialize guest vAPIC log")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20211123161038.48009-2-mlevitsk@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 134c37fa25 ]
The last driver referencing the slave_id on Marvell PXA and MMP platforms
was the SPI driver, but this stopped doing so a long time ago, so the
TODO from the earlier patch can no be removed.
Fixes: b729bf3453 ("spi/pxa2xx: Don't use slave_id of dma_slave_config")
Fixes: 13b3006b8e ("dma: mmp_pdma: add filter function")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20211122222203.4103644-7-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a670c82d9c ]
Commit d4a451d5fc ("arch: remove the ARCH_PHYS_ADDR_T_64BIT config
symbol") removes config ARCH_PHYS_ADDR_T_64BIT with all instances of that
config refactored appropriately. Since then, it is recommended to use the
config PHYS_ADDR_T_64BIT instead.
Commit 171543e752 ("MIPS: Disallow CPU_SUPPORTS_HUGEPAGES for XPA,EVA")
introduces the expression "!(32BIT && (ARCH_PHYS_ADDR_T_64BIT || EVA))"
for config CPU_SUPPORTS_HUGEPAGES, which unintentionally refers to the
non-existing symbol ARCH_PHYS_ADDR_T_64BIT instead of the intended
PHYS_ADDR_T_64BIT.
Fix this Kconfig reference to the intended PHYS_ADDR_T_64BIT.
This issue was identified with the script ./scripts/checkkconfigsymbols.py.
I then reported it on the mailing list and Paul confirmed the mistake in
the linked email thread.
Link: https://lore.kernel.org/lkml/H8IU3R.H5QVNRA077PT@crapouillou.net/
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Fixes: 171543e752 ("MIPS: Disallow CPU_SUPPORTS_HUGEPAGES for XPA,EVA")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd4eb90b16 ]
Commit ab7c01fdc3 ("mips: Add MIPS Release 5 support") adds the two
configs CPU_MIPS32_R5 and CPU_MIPS64_R5, which depend on the corresponding
SYS_HAS_CPU_MIPS32_R5 and SYS_HAS_CPU_MIPS64_R5, respectively.
The config SYS_HAS_CPU_MIPS32_R5 was already introduced with commit
c5b367835c ("MIPS: Add support for XPA."); the config
SYS_HAS_CPU_MIPS64_R5, however, was never introduced.
Hence, ./scripts/checkkconfigsymbols.py warns:
SYS_HAS_CPU_MIPS64_R5
Referencing files: arch/mips/Kconfig, arch/mips/include/asm/cpu-type.h
Add the definition for config SYS_HAS_CPU_MIPS64_R5 under the assumption
that SYS_HAS_CPU_MIPS64_R5 follows the same pattern as the existing
SYS_HAS_CPU_MIPS32_R5 and SYS_HAS_CPU_MIPS64_R6.
Fixes: ab7c01fdc3 ("mips: Add MIPS Release 5 support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fc058a72f ]
stm32's clk driver register two ltdc gate clk to clk core by
clk_hw_register_gate() and clk_hw_register_composite()
first: 'stm32f429_gates[]', clk name is 'ltdc', which no user to use.
second: 'stm32f429_aux_clk[]', clk name is 'lcd-tft', used by ltdc driver
both of them point to the same offset of stm32's RCC register. after
kernel enter console, clk core turn off ltdc's clk as 'stm32f429_gates[]'
is no one to use. but, actually 'stm32f429_aux_clk[]' is in use.
stm32f469/746/769 have the same issue, fix it.
Fixes: daf2d117cb ("clk: stm32f4: Add lcd-tft clock")
Link: https://lore.kernel.org/linux-arm-kernel/1590564453-24499-7-git-send-email-dillon.minfei@gmail.com/
Link: https://lore.kernel.org/lkml/CAPTRvHkf0cK_4ZidM17rPo99gWDmxgqFt4CDUjqFFwkOeQeFDg@mail.gmail.com/
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/1635232282-3992-10-git-send-email-dillon.minfei@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fd4cf5d35 ]
If an architecture does not support 64 bit dma addresses then testing
for an expected dma address >= 0x100000000 will fail.
Fixes: e0d072782c ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211212221852.233295-1-frowand.list@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8d61a9112 ]
The struct device variable "dev_bogus" was triggering this warning
on a PowerPC build:
drivers/of/unittest.c: In function 'of_unittest_dma_ranges_one.constprop':
[...] >> The frame size of 1424 bytes is larger than 1024 bytes
[-Wframe-larger-than=]
This variable is now dynamically allocated.
Fixes: e0d072782c ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211210184636.7273-2-jim2101024@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2167c0b205 ]
The return value of device_property_read_u32_array() is not always 0.
To catch the exception in case that devm_kzalloc failed and the
rt5663->imp_table was NULL, which caused the failure of
device_property_read_u32_array.
Fixes: 450f0f6a8f ("ASoC: rt5663: Add the manual offset field to compensate the DC offset")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211215031550.70702-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>